+2005-01-14 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: Sinclude aclocal.m4 before common.m4. Add
+ explicit call to AC_CONFIG_HEADER.
+ * configure: Regenerate.
+
+2005-01-12 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: Update to use ../common/common.m4.
+ * configure: Re-generate.
+
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+2005-01-07 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: Rename configure.in, require autoconf 2.59.
+ * configure: Re-generate.
+
+2004-12-08 Hans-Peter Nilsson <hp@axis.com>
+
+ * configure: Regenerate for ../common/aclocal.m4 update.
+
+2004-06-28 Andrew Cagney <cagney@gnu.org>
+
+ * armemu.c: Rename ui_loop_hook to deprecated_ui_loop_hook.
+
+2003-12-29 Mark Mitchell <mark@codesourcery.com>
+
+ * armos.c (fcntl.h): Do not include it.
+ (O_RDONLY): Do not define.
+ (O_WRONLY): Likewise.
+ (O_RDWR): Likewise.
+ (targ-vals.h): Include it.
+ (translate_open_mode): Use TARGET_O_* instead of O_*.
+ (SWIopen): Likewise.
+ * Makefile.in (armos.o): Depend on targ-vals.h.
+
+2003-04-13 Nick Clifton <nickc@redhat.com>
+
+ * armvirt.c (GetWord): Only call XScale_check_memacc if in XScale
+ mode.
+ (PutWord): Likewise.
+
+2003-03-30 Nick Clifton <nickc@redhat.com>
+
+ * configure.in (CON_FLAGS): Remove.
+ (COPRO): Unconditionally include iwmmxt.o.
+ * configure: Regenerate.
+ * Makefile.in (CON_FLAGS): Remove.
+ * armcopro.c: Remove use of __IWMMXT__ flag.
+ * wrapper.c: Likewise.
+ * armemu.c: Likewise.
+ Add explanatory comment for suppressed code.
+
+2003-03-27 Nick Clifton <nickc@redhat.com>
+
+ * armos.c (ARMul_OsHandleSWI): Catch SWIs for unhandled vectors.
+
+2003-03-27 Nick Clifton <nickc@redhat.com>
+
+ * configure.in: (CON_FLAGS): Define and intialise.
+ (COPRO): Add iwmmxt.o if configuring for XScale.
+ * configure: Regenerate.
+ * Makefile.in (iwmmxt.o): Add rule to build.
+ (COM_FLAGS): Define.
+ (ALL_FLAGS): Add CON_FLAGS.
+ * armcopro.c (ARMul_CoProInit): Initialise iWMMXt coprocessors.
+ * armdefs.h (struct ARMul_State): Add 'is_iWMMXt' field.
+ (ARM_iWMMXt_Prop): Define.
+ * armemu.c (ARMul_Emulate16): Intercept iWMMXt instructions and
+ pass to coprocessor.
+ * arminit.c (ARMul_NewState): Initialise 'is_iWMMXt'.
+ (ARMul_Abort): Catch branches through uninitialised vectors.
+ * armos.c (softevtorcode): Update comment.
+ (ARMul_OsInit): Use ARMUndefinedInstrV.
+ * wrapper.c (sim_create_inferior): Handle iWMMXt processor type.
+ (sim_store_register): Handle iWMMXt registers.
+ (sim_fetch_register): Handle iWMMXt registers.
+ * iwmmxt.h: New file. Exported iWMMXt coprocessor emulator
+ functions.
+ * iwmmxt.c: New file: iWMMXt emulator.
+
+2003-03-20 Nick Clifton <nickc@redhat.com>
+
+ * Contribute support for Cirrus Maverick ARM co-processor,
+ written by Aldy Hernandez <aldyh@redhat.com> and
+ Andrew Cagney <cagney@redhat.com>:
+
+ * maverick.c: New file: Support for Maverick floating point
+ co-processor.
+ * Makefile.in: Add maverick.o target.
+ * configure.in (COPRO): Add maverick.o.
+ * configure: Regenerate.
+ * armcopro.c (ARMul_CoProInit): Only initialise co-processors
+ available on target processor. Add code to initialse Maverick
+ co-processor support code.
+ * armdefs.h (ARMul_state): Add is_ep9312 field.
+ (ARM_ep9312_Prop): Define.
+ * armemu.h: Add prototypes for Maverick co-processor
+ functions.
+ * arminit.c (ARMul_SelectProcessor): Initialise the
+ co-processor support once the chip has been selected.
+ * wrapper.c: Add support for Maverick co-processor.
+ (init): Do not call ARMul_CoProInit. Delays this until the
+ chip has been selected.
+
+2003-03-02 Nick Clifton <nickc@redhat.com>
+
+ * armos.c (SWIWrite0): Catch big-endian bug when printing
+ characters.
+
+2003-02-27 Andrew Cagney <cagney@redhat.com>
+
+ * wrapper.c (sim_create_inferior, sim_open): Rename _bfd to bfd.
+
+2003-01-10 Ben Elliston <bje@redhat.com>
+
+ * README.Cygnus: Rename from this ..
+ * README: .. to this.
+
+2002-09-27 Andrew Cagney <ac131313@redhat.com>
+
+ * wrapper.c (sim_open): Add support for -m<mem-size>.
+ (mem_size): Reduce to 2MB.
+ Fix PR gdb/433.
+
+2002-08-15 Nick Clifton <nickc@redhat.com>
+
+ * armos.c (ARMul_OSHandleSWI): Catch and ignore SWIs of -1, they
+ can be caused by an interrupted system call being resumed by GDB.
+
+2002-07-05 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * armemu.c (ARMul_Emulate32): Add more tests for valid MIA, MIAPH
+ and MIAxy instructions.
+
+2002-06-21 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * armos.h (ADP_Stopped_RunTimeError): Set correct value.
+
+2002-06-16 Andrew Cagney <ac131313@redhat.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+2002-06-12 Andrew Cagney <ac131313@redhat.com>
+
+ * Makefile.in: Update copyright.
+ (wrapper.o): Specify dependencies.
+ * wrapper.c: Include "gdb/sim-arm.h".
+ (sim_store_register, sim_fetch_register): Rewrite using `enum
+ arm_sim_regs' and a switch.
+
+2002-06-09 Andrew Cagney <cagney@redhat.com>
+
+ * wrapper.c: Include "gdb/callback.h" and "gdb/remote-sim.h".
+ * armos.c: Include "gdb/callback.h".
+
+2002-05-29 Nick Clifton <nickc@cambridge.redhat.com>
+
+ * armcopro.c (XScale_check_memacc): Set the FSR and FAR registers
+ if a Data Abort is detected.
+
2002-05-27 Nick Clifton <nickc@cambridge.redhat.com>
+ * armvirt.c (GetWord): Only perform access checks if 'check'
+ is set.
+ (PutWord): Likewise.
+ * wrapper.c (sim_create_inferior): Report unknown machine
+ numbers.
* thumbemu.c (ARMul_ThumbDecode, Case 31): Do not set LR to pc +
2, it has already been advanced.
CRm is 1.
(write_cp13_reg): Allow bit 0 of reg 1 of CRm 1 to be written to.
-2002-05-20 Nick Clifton <nickc@cambridge.redhat.com>
-
- * Makefile.in (SWI_TARGET_SWITCHES): Define.
- * armos.c (swi_mask): Define. Initialise to supporting all
- SWI emulations.
- (ARMul_OSInit): For XScale targets, only support the ANGEL
- SWI interface. (This is at the request if Intel).
- (ARMul_OSHandleSWI): Examine swi_mask to see if a particular
- SWI call should be emulated.
- Do not fall through from AngelSWI_Reason_WriteC.
- Propagate exit code from RedBoot Exit SWI.
- * rdi-dgb.h (swi_mask): Prototype.
- (SWI_MASK_DEMON, SWI_MASK_ANGEL, SWI_MASK_REDBOOT): Define.
- * wrapper.c: Include run-sim.h.
- (sim_target_parse_command_line): New function. Look for and
- handle --swi-support switch.
- (sim_target_parse_arg_array): New function. Process an argv
- array for parsing by sim_target_parse_command_line.
- (sim_target_display_usage): New function. Describe syntax of
- --swi-suppoort switch.
- (sim_open): Add call to sim_target_parse_arg_array).
-
2002-05-17 Nick Clifton <nickc@cambridge.redhat.com>
- * Makefile.in (SWI_TARGET_SWITCHES): Define.
+ * Makefile.in (SIM_TARGET_SWITCHES): Define.
* armos.c (swi_mask): Define. Initialise to supporting all
SWI emulations.
(ARMul_OSInit): For XScale targets, only support the ANGEL
projects / deliverable / binutils-gdb.git / blobdiff