-# This file contains common code used by all simulators.
-#
-# SIM_AC_COMMON invokes AC macros used by all simulators and by the common
-# directory. It is intended to be invoked before any target specific stuff.
-# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
-# It is intended to be invoked last.
-#
-# The simulator's configure.in should look like:
-#
-# dnl Process this file with autoconf to produce a configure script.
-# sinclude(../common/aclocal.m4)
-# AC_PREREQ(2.5)dnl
-# AC_INIT(Makefile.in)
-#
-# SIM_AC_COMMON
-#
-# ... target specific stuff ...
-#
-# SIM_AC_OUTPUT
+# generated automatically by aclocal 1.15.1 -*- Autoconf -*-
-AC_DEFUN(SIM_AC_COMMON,
-[
-# autoconf.info says this should be called right after AC_INIT.
-AC_CONFIG_HEADER(config.h:config.in)
+# Copyright (C) 1996-2017 Free Software Foundation, Inc.
-AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..)
-AC_CANONICAL_SYSTEM
-AC_ARG_PROGRAM
-AC_PROG_CC
-AC_PROG_INSTALL
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
-# Put a plausible default for CC_FOR_BUILD in Makefile.
-AC_C_CROSS
-if test "x$cross_compiling" = "xno"; then
- CC_FOR_BUILD='$(CC)'
-else
- CC_FOR_BUILD=gcc
-fi
-AC_SUBST(CC_FOR_BUILD)
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
-AC_SUBST(CFLAGS)
-AC_SUBST(HDEFINES)
-AR=${AR-ar}
-AC_SUBST(AR)
-AC_PROG_RANLIB
-
-. ${srcdir}/../../bfd/configure.host
-
-dnl Standard simulator options.
-dnl Eventually all simulators will support these.
-dnl Do not add any here that cannot be supported by all simulators.
-dnl Do not add similar but different options to a particular simulator,
-dnl all shall eventually behave the same way.
-
-
-dnl This is a generic option to enable special byte swapping
-dnl insns on *any* cpu.
-AC_ARG_ENABLE(sim-bswap,
-[ --enable-sim-bswap Use Host specific BSWAP instruction.],
-[case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi],[sim_bswap=""])dnl
-AC_SUBST(sim_bswap)
-
-
-AC_ARG_ENABLE(sim-cflags,
-[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator],
-[case "${enableval}" in
- yes) sim_cflags="-O2";;
- trace) AC_MSG_ERROR("Please use --enable-sim-debug instead."); sim_cflags="";;
- no) sim_cflags="";;
- *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
- echo "Setting sim cflags = $sim_cflags" 6>&1
-fi],[sim_cflags=""])dnl
-AC_SUBST(sim_cflags)
-
-
-dnl --enable-sim-debug is for developers of the simulator
-dnl the allowable values are work-in-progress
-AC_ARG_ENABLE(sim-debug,
-[ --enable-sim-debug=opts Enable debugging flags],
-[case "${enableval}" in
- yes) sim_debug="-DDEBUG=7";;
- no) sim_debug="-DDEBUG=0";;
- *) sim_debug="-DDEBUG='(${enableval})'";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
- echo "Setting sim debug = $sim_debug" 6>&1
-fi],[sim_debug=""])dnl
-AC_SUBST(sim_debug)
-
-
-dnl --enable-sim-trace is for users of the simulator
-dnl the allowable values are work-in-progress
-AC_ARG_ENABLE(sim-trace,
-[ --enable-sim-trace=opts Enable tracing flags],
-[case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
- echo "Setting sim trace = $sim_trace" 6>&1
-fi],[sim_trace=""])dnl
-AC_SUBST(sim_trace)
-
-
-dnl These are available to append to as desired.
-sim_link_files=
-sim_link_links=
-
-dnl Create tconfig.h either from simulator's tconfig.in or default one
-dnl in common.
-sim_link_links=tconfig.h
-if test -f ${srcdir}/tconfig.in
-then
- sim_link_files=tconfig.in
-else
- sim_link_files=../common/tconfig.in
-fi
-
-# targ-vals.def points to the libc macro description file.
-case "${target}" in
-*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
-esac
-sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
-sim_link_links="${sim_link_links} targ-vals.def"
-
-]) dnl End of SIM_AC_COMMON
-
-
-dnl Almost standard simulator options.
-dnl Eventually all simulators will support these.
-
-
-dnl --enable-sim-endian={yes,no,big,little} is for simulators
-dnl that support both big and little endian targets.
-AC_DEFUN(SIM_AC_OPTION_ENDIAN,
-[
-default_sim_endian="ifelse([$1],,,-DWITH_TARGET_BYTE_ORDER=[$1])"
-AC_ARG_ENABLE(sim-endian,
-[ --enable-sim-endian=endian Specify target byte endian orientation.],
-[case "${enableval}" in
- yes) case "$target" in
- *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
- *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
- esac;;
- no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";;
- b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
- echo "Setting endian flags = $sim_endian" 6>&1
-fi],[sim_endian="${default_sim_endian}"])dnl
-])
-
-
-dnl --enable-sim-hostendian is for users of the simulator when
-dnl they find that AC_C_BIGENDIAN does not function correctly
-dnl (for instance in a canadian cross)
-AC_DEFUN(SIM_AC_OPTION_HOSTENDIAN,
-[
-AC_ARG_ENABLE(sim-hostendian,
-[ --enable-sim-hostendain=end Specify host byte endian orientation.],
-[case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
- *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
- echo "Setting hostendian flags = $sim_hostendian" 6>&1
-fi],[
-if test "x$cross_compiling" = "xno"; then
- AC_C_BIGENDIAN
- if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
- else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
- fi
-else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
-fi])dnl
-])
-
-
-dnl --enable-sim-inline is for users that wish to ramp up the simulator's
-dnl performance by inlining functions.
-AC_DEFUN(SIM_AC_OPTION_INLINE,
-[
-default_sim_inline="ifelse([$1],,,-DDEFAULT_INLINE=[$1])"
-AC_ARG_ENABLE(sim-inline,
-[ --enable-sim-inline=inlines Specify which functions should be inlined.],
-[sim_inline=""
-case "$enableval" in
- no) sim_inline="-DDEFAULT_INLINE=0";;
- 0) sim_inline="-DDEFAULT_INLINE=0";;
- yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_INLINE";;
- 1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";;
- *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
- new_flag=""
- case "$x" in
- *_INLINE=*) new_flag="-D$x";;
- *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;;
- *_INLINE) new_flag="-D$x=ALL_INLINE";;
- *) new_flag="-D$x""_INLINE=ALL_INLINE";;
- esac
- if test x"$sim_inline" = x""; then
- sim_inline="$new_flag"
- else
- sim_inline="$sim_inline $new_flag"
- fi
- done;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then
- echo "Setting inline flags = $sim_inline" 6>&1
-fi],[if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then
- sim_inline="${default_sim_inline}"
- if test x"$silent" != x"yes"; then
- echo "Setting inline flags = $sim_inline" 6>&1
- fi
-else
- sim_inline=""
-fi])dnl
-])
-
-
-dnl --enable-sim-warnings is for developers of the simulator.
-dnl it enables extra GCC specific warnings.
-AC_DEFUN(SIM_AC_OPTION_WARNINGS,
-[
-AC_ARG_ENABLE(sim-warnings,
-[ --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o],
-[case "${enableval}" in
- yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";;
- no) sim_warnings="-w";;
- *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then
- echo "Setting warning flags = $sim_warnings" 6>&1
-fi],[sim_warnings=""])dnl
-])
-
-
-
-
-dnl Generate the Makefile in a target specific directory.
-dnl Substitutions aren't performed on the file in AC_SUBST_FILE,
-dnl so this is a cover macro to tuck the details away of how we cope.
-dnl We cope by having autoconf generate two files and then merge them into
-dnl one afterwards. The two pieces of the common fragment are inserted into
-dnl the target's fragment at the appropriate points.
-
-AC_DEFUN(SIM_AC_OUTPUT,
-[
-dnl Optional options
-AC_SUBST(sim_endian)
-AC_SUBST(sim_hostendian)
-AC_SUBST(sim_inline)
-AC_SUBST(sim_warnings)
-dnl
-AC_LINK_FILES($sim_link_files, $sim_link_links)
-AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in,
-[case "x$CONFIG_FILES" in xMakefile*)
- echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
- rm -f Makesim1.tmp Makesim2.tmp Makefile
- sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
- sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' <Make-common.sim >Makesim2.tmp
- sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \
- -e '/^## COMMON_POST_/ r Makesim2.tmp' \
- <Makefile.sim >Makefile
- rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp
- ;;
- esac
- case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac
-])
-])
+m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])])
+m4_include([acinclude.m4])
projects / deliverable / binutils-gdb.git / blobdiff