sim_cflags
sim_bswap
MAINT
+MAINTAINER_MODE_FALSE
+MAINTAINER_MODE_TRUE
lt_cv_dlopen_libs
OTOOL64
OTOOL
LIBTOOL
PLUGINS_FALSE
PLUGINS_TRUE
+zlibinc
+zlibdir
CATOBJEXT
GENCAT
INSTOBJEXT
ac_subst_files=''
ac_user_opts='
enable_option_checking
-with_zlib
+with_system_zlib
enable_plugins
enable_shared
enable_static
enable_sim_profile
with_pkgversion
with_bugurl
+enable_sim_endian
enable_sim_alignment
enable_sim_hostendian
enable_sim_scache
--disable-option-checking ignore unrecognized --enable/--with options
--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)
--enable-FEATURE[=ARG] include FEATURE [ARG=yes]
- --enable-plugins Enable support for plugins (defaults no)
+ --enable-plugins Enable support for plugins
--enable-shared[=PKGS] build shared libraries [default=yes]
--enable-static[=PKGS] build static libraries [default=yes]
--enable-fast-install[=PKGS]
optimize for fast installation [default=yes]
--disable-libtool-lock avoid locking (might break parallel builds)
- --enable-maintainer-mode Enable developer functionality.
- --enable-sim-bswap Use Host specific BSWAP instruction.
- --enable-sim-cflags=opts Extra CFLAGS for use in building simulator
- --enable-sim-debug=opts Enable debugging flags
- --enable-sim-stdio Specify whether to use stdio for console input/output.
- --enable-sim-trace=opts Enable tracing flags
- --enable-sim-profile=opts Enable profiling flags
- --enable-sim-alignment=align Specify strict, nonstrict or forced alignment of memory accesses.
- --enable-sim-hostendian=end Specify host byte endian orientation.
- --enable-sim-scache=size Specify simulator execution cache size.
+ --enable-maintainer-mode enable make rules and dependencies not useful
+ (and sometimes confusing) to the casual installer
+ --enable-sim-bswap Use Host specific BSWAP instruction
+ --enable-sim-cflags=opts
+ Extra CFLAGS for use in building simulator
+ --enable-sim-debug=opts Enable debugging flags (for developers of the sim
+ itself)
+ --enable-sim-stdio Specify whether to use stdio for console
+ input/output
+ --enable-sim-trace=opts Enable tracing of simulated programs
+ --enable-sim-profile=opts
+ Enable profiling flags
+ --enable-sim-endian=endian
+ Specify target byte endian orientation
+ --enable-sim-alignment=align
+ Specify strict, nonstrict or forced alignment of
+ memory accesses
+ --enable-sim-hostendian=end
+ Specify host byte endian orientation
+ --enable-sim-scache=size
+ Specify simulator execution cache size
--enable-werror treat compile warnings as errors
--enable-build-warnings enable build-time compiler warnings if gcc is used
--enable-sim-build-warnings
enable SIM specific build-time compiler warnings if
gcc is used
- --enable-sim-hardware=LIST Specify the hardware to be included in the build.
- --enable-sim-default-model=model Specify default model to simulate.
- --enable-sim-environment=environment Specify mixed, user, virtual or operating environment.
- --enable-sim-inline=inlines Specify which functions should be inlined.
- --enable-cgen-maint=DIR build cgen generated files
+ --enable-sim-hardware=LIST
+ Specify the hardware to be included in the build.
+ --enable-sim-default-model=model
+ Specify default model to simulate
+ --enable-sim-environment=environment
+ Specify mixed, user, virtual or operating
+ environment
+ --enable-sim-inline=inlines
+ Specify which functions should be inlined
+ --enable-cgen-maint=DIR build cgen generated files
Optional Packages:
--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
- --with-zlib include zlib support (auto/yes/no) default=auto
+ --with-system-zlib use installed libz
--with-pic try to use only PIC/non-PIC objects [default=use
both]
--with-gnu-ld assume the C compiler uses GNU ld [default=no]
- --with-pkgversion=PKG Use PKG in the version string in place of "GDB"
+ --with-pkgversion=PKG Use PKG in the version string in place of "SIM"
--with-bugurl=URL Direct users to URL to report a bug
Some influential environment variables:
# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile.
# It is intended to be invoked last.
#
-# The simulator's configure.in should look like:
+# The simulator's configure.ac should look like:
#
# dnl Process this file with autoconf to produce a configure script.
# AC_PREREQ(2.64)dnl
-
# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*-
#
# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005,
rm -rf conftest*
;;
-x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \
+x86_64-*kfreebsd*-gnu|x86_64-*linux*|powerpc*-*linux*| \
s390*-*linux*|s390*-*tpf*|sparc*-*linux*)
# Find out which ABI we are using.
echo 'int i;' > conftest.$ac_ext
;;
esac
;;
- ppc64-*linux*|powerpc64-*linux*)
+ powerpc64le-*linux*)
+ LD="${LD-ld} -m elf32lppclinux"
+ ;;
+ powerpc64-*linux*)
LD="${LD-ld} -m elf32ppclinux"
;;
s390x-*linux*)
x86_64-*linux*)
LD="${LD-ld} -m elf_x86_64"
;;
- ppc*-*linux*|powerpc*-*linux*)
+ powerpcle-*linux*)
+ LD="${LD-ld} -m elf64lppc"
+ ;;
+ powerpc-*linux*)
LD="${LD-ld} -m elf64ppc"
;;
s390*-*linux*|s390*-*tpf*)
case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in
10.0,*86*-darwin8*|10.0,*-darwin[91]*)
_lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
- 10.[012]*)
+ 10.[012][,.]*)
_lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;;
10.*)
_lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;;
# BFD conditionally uses zlib, so we must link it in if libbfd does, by
# using the same condition.
- # See if the user specified whether he wants zlib support or not.
+ # Use the system's zlib library.
+ zlibdir="-L\$(top_builddir)/../zlib"
+ zlibinc="-I\$(top_srcdir)/../zlib"
-# Check whether --with-zlib was given.
-if test "${with_zlib+set}" = set; then :
- withval=$with_zlib;
-else
- with_zlib=auto
+# Check whether --with-system-zlib was given.
+if test "${with_system_zlib+set}" = set; then :
+ withval=$with_system_zlib; if test x$with_system_zlib = xyes ; then
+ zlibdir=
+ zlibinc=
+ fi
+
+fi
+
+
+
+
+
+# BFD uses libdl when when plugins enabled.
+
+ maybe_plugins=no
+ for ac_header in dlfcn.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "dlfcn.h" "ac_cv_header_dlfcn_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_dlfcn_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_DLFCN_H 1
+_ACEOF
+ maybe_plugins=yes
+fi
+
+done
+
+ for ac_header in windows.h
+do :
+ ac_fn_c_check_header_compile "$LINENO" "windows.h" "ac_cv_header_windows_h" "$ac_includes_default
+"
+if test "x$ac_cv_header_windows_h" = x""yes; then :
+ cat >>confdefs.h <<_ACEOF
+#define HAVE_WINDOWS_H 1
+_ACEOF
+ maybe_plugins=yes
fi
+done
- if test "$with_zlib" != "no"; then
- { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing zlibVersion" >&5
-$as_echo_n "checking for library containing zlibVersion... " >&6; }
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+
+ # Check whether --enable-plugins was given.
+if test "${enable_plugins+set}" = set; then :
+ enableval=$enable_plugins; case "${enableval}" in
+ no) plugins=no ;;
+ *) plugins=yes
+ if test "$maybe_plugins" != "yes" ; then
+ as_fn_error "Building with plugin support requires a host that supports dlopen." "$LINENO" 5
+ fi ;;
+ esac
+else
+ plugins=$maybe_plugins
+
+fi
+
+ if test "$plugins" = "yes"; then
+ { $as_echo "$as_me:${as_lineno-$LINENO}: checking for library containing dlopen" >&5
+$as_echo_n "checking for library containing dlopen... " >&6; }
+if test "${ac_cv_search_dlopen+set}" = set; then :
$as_echo_n "(cached) " >&6
else
ac_func_search_save_LIBS=$LIBS
#ifdef __cplusplus
extern "C"
#endif
-char zlibVersion ();
+char dlopen ();
int
main ()
{
-return zlibVersion ();
+return dlopen ();
;
return 0;
}
_ACEOF
-for ac_lib in '' z; do
+for ac_lib in '' dl; do
if test -z "$ac_lib"; then
ac_res="none required"
else
LIBS="-l$ac_lib $ac_func_search_save_LIBS"
fi
if ac_fn_c_try_link "$LINENO"; then :
- ac_cv_search_zlibVersion=$ac_res
+ ac_cv_search_dlopen=$ac_res
fi
rm -f core conftest.err conftest.$ac_objext \
conftest$ac_exeext
- if test "${ac_cv_search_zlibVersion+set}" = set; then :
+ if test "${ac_cv_search_dlopen+set}" = set; then :
break
fi
done
-if test "${ac_cv_search_zlibVersion+set}" = set; then :
+if test "${ac_cv_search_dlopen+set}" = set; then :
else
- ac_cv_search_zlibVersion=no
+ ac_cv_search_dlopen=no
fi
rm conftest.$ac_ext
LIBS=$ac_func_search_save_LIBS
fi
-{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_zlibVersion" >&5
-$as_echo "$ac_cv_search_zlibVersion" >&6; }
-ac_res=$ac_cv_search_zlibVersion
+{ $as_echo "$as_me:${as_lineno-$LINENO}: result: $ac_cv_search_dlopen" >&5
+$as_echo "$ac_cv_search_dlopen" >&6; }
+ac_res=$ac_cv_search_dlopen
if test "$ac_res" != no; then :
test "$ac_res" = "none required" || LIBS="$ac_res $LIBS"
- for ac_header in zlib.h
-do :
- ac_fn_c_check_header_mongrel "$LINENO" "zlib.h" "ac_cv_header_zlib_h" "$ac_includes_default"
-if test "x$ac_cv_header_zlib_h" = x""yes; then :
- cat >>confdefs.h <<_ACEOF
-#define HAVE_ZLIB_H 1
-_ACEOF
fi
-done
-
-fi
-
- if test "$with_zlib" = "yes" -a "$ac_cv_header_zlib_h" != "yes"; then
- as_fn_error "zlib (libz) library was explicitly requested but not found" "$LINENO" 5
- fi
fi
-
-# BFD uses libdl when when plugins enabled.
-
-# Check whether --enable-plugins was given.
-if test "${enable_plugins+set}" = set; then :
- enableval=$enable_plugins; case "${enableval}" in
- yes | "") plugins=yes ;;
- no) plugins=no ;;
- *) plugins=yes ;;
- esac
-else
- plugins=no
-fi
-
-
if test "$plugins" = yes; then
PLUGINS_TRUE=
PLUGINS_FALSE='#'
if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \
&& test "$tmp_diet" = no
then
- tmp_addflag=
+ tmp_addflag=' $pic_flag'
tmp_sharedflag='-shared'
case $cc_basename,$host_cpu in
pgcc*) # Portland Group C compiler
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12284 "configure"
+#line 12332 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2
lt_status=$lt_dlunknown
cat > conftest.$ac_ext <<_LT_EOF
-#line 12390 "configure"
+#line 12438 "configure"
#include "confdefs.h"
#if HAVE_DLFCN_H
-USE_MAINTAINER_MODE=no
-# Check whether --enable-maintainer-mode was given.
+
+{ $as_echo "$as_me:${as_lineno-$LINENO}: checking whether to enable maintainer-specific portions of Makefiles" >&5
+$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; }
+ # Check whether --enable-maintainer-mode was given.
if test "${enable_maintainer_mode+set}" = set; then :
- enableval=$enable_maintainer_mode; case "${enableval}" in
- yes) MAINT="" USE_MAINTAINER_MODE=yes ;;
- no) MAINT="#" ;;
- *) as_fn_error "\"--enable-maintainer-mode does not take a value\"" "$LINENO" 5; MAINT="#" ;;
-esac
-if test x"$silent" != x"yes" && test x"$MAINT" = x""; then
- echo "Setting maintainer mode" 6>&1
+ enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval
+else
+ USE_MAINTAINER_MODE=no
fi
+
+ { $as_echo "$as_me:${as_lineno-$LINENO}: result: $USE_MAINTAINER_MODE" >&5
+$as_echo "$USE_MAINTAINER_MODE" >&6; }
+ if test $USE_MAINTAINER_MODE = yes; then
+ MAINTAINER_MODE_TRUE=
+ MAINTAINER_MODE_FALSE='#'
else
- MAINT="#"
+ MAINTAINER_MODE_TRUE='#'
+ MAINTAINER_MODE_FALSE=
fi
+ MAINT=$MAINTAINER_MODE_TRUE
+
+
# Check whether --enable-sim-bswap was given.
# Check whether --enable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then :
enableval=$enable_sim_trace; case "${enableval}" in
- yes) sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;
- no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ yes) sim_trace="-DWITH_TRACE=-1";;
+ no) sim_trace="-DWITH_TRACE=0";;
[-0-9]*)
- sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
+ sim_trace="-DWITH_TRACE='(${enableval})'";;
[[:lower:]]*)
sim_trace=""
for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
*) PKGVERSION="($withval) " ;;
esac
else
- PKGVERSION="(GDB) "
+ PKGVERSION="(SIM) "
fi
sim_link_files=
sim_link_links=
-sim_link_links=tconfig.h
-if test -f ${srcdir}/tconfig.in
-then
- sim_link_files=tconfig.in
-else
- sim_link_files=../common/tconfig.in
-fi
-
# targ-vals.def points to the libc macro description file.
case "${target}" in
*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
done
+
+wire_endian="LITTLE"
+default_endian=""
+# Check whether --enable-sim-endian was given.
+if test "${enable_sim_endian+set}" = set; then :
+ enableval=$enable_sim_endian; case "${enableval}" in
+ b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
+ yes) if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
+ else
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
+ else
+ echo "No hard-wired endian for target $target" 1>&6
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
+ fi
+ fi;;
+ no) if test x"$default_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
+ else
+ if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
+ else
+ echo "No default endian for target $target" 1>&6
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
+ fi
+ fi;;
+ *) as_fn_error "\"Unknown value $enableval for --enable-sim-endian\"" "$LINENO" 5; sim_endian="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then
+ echo "Setting endian flags = $sim_endian" 6>&1
+fi
+else
+ if test x"$default_endian" != x; then
+ sim_endian="-DWITH_DEFAULT_TARGET_BYTE_ORDER=BFD_ENDIAN_${default_endian}"
+else
+ if test x"$wire_endian" != x; then
+ sim_endian="-DWITH_TARGET_BYTE_ORDER=BFD_ENDIAN_${wire_endian}"
+ else
+ sim_endian=
+ fi
+fi
+fi
+
wire_alignment="NONSTRICT_ALIGNMENT"
default_alignment=""
# Check whether --enable-sim-hostendian was given.
if test "${enable_sim_hostendian+set}" = set; then :
enableval=$enable_sim_hostendian; case "${enableval}" in
- no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";;
- b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";;
- l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";;
+ no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN";;
+ b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG";;
+ l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE";;
*) as_fn_error "\"Unknown value $enableval for --enable-sim-hostendian\"" "$LINENO" 5; sim_hostendian="";;
esac
if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then
esac
if test $ac_cv_c_bigendian = yes; then
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_BIG"
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_LITTLE"
fi
else
- sim_hostendian="-DWITH_HOST_BYTE_ORDER=0"
+ sim_hostendian="-DWITH_HOST_BYTE_ORDER=BFD_ENDIAN_UNKNOWN"
fi
fi
true
fi
-# The entries after -Wno-pointer-sign are disabled warnings which may
-# be enabled in the future, which can not currently be used to build
-# GDB.
-# NOTE: If you change this list, remember to update
-# gdb/doc/gdbint.texinfo.
build_warnings="-Wall -Wdeclaration-after-statement -Wpointer-arith \
--Wformat-nonliteral -Wno-pointer-sign \
+-Wpointer-sign \
-Wno-unused -Wunused-value -Wunused-function \
--Wno-switch -Wno-char-subscripts -Wmissing-prototypes"
+-Wno-switch -Wno-char-subscripts -Wmissing-prototypes
+-Wdeclaration-after-statement -Wempty-body -Wmissing-parameter-type \
+-Wold-style-declaration -Wold-style-definition"
# Enable -Wno-format by default when using gcc on mingw since many
# GCC versions complain about %I64.
case "${host}" in
*-*-mingw32*) build_warnings="$build_warnings -Wno-format" ;;
+ *) build_warnings="$build_warnings -Wformat-nonliteral" ;;
esac
# Check whether --enable-build-warnings was given.
fi
-if test x"no" = x"yes"; then
- sim_hw_p=yes
-else
- sim_hw_p=no
-fi
if test ""; then
hardware=""
else
hardware="cfi core pal glue"
fi
-hardware="$hardware rv cris"
+hardware="$hardware rv cris cris_900000xx"
+
sim_hw_cflags="-DWITH_HW=1"
sim_hw="$hardware"
sim_hw_objs="\$(SIM_COMMON_HW_OBJS) `echo $sim_hw | sed -e 's/\([^ ][^ ]*\)/dv-\1.o/g'`"
+
# Check whether --enable-sim-hardware was given.
if test "${enable_sim_hardware+set}" = set; then :
enableval=$enable_sim_hardware;
-case "${enableval}" in
- yes) sim_hw_p=yes;;
- no) sim_hw_p=no;;
- ,*) sim_hw_p=yes; hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
- *,) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
- *) sim_hw_p=yes; hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
+else
+ enable_sim_hardware="yes"
+fi
+
+case ${enable_sim_hardware} in
+ yes|no) ;;
+ ,*) hardware="${hardware} `echo ${enableval} | sed -e 's/,/ /'`";;
+ *,) hardware="`echo ${enableval} | sed -e 's/,/ /'` ${hardware}";;
+ *) hardware="`echo ${enableval} | sed -e 's/,/ /'`"'';;
esac
-if test "$sim_hw_p" != yes; then
+
+if test "$enable_sim_hardware" = no; then
sim_hw_objs=
sim_hw_cflags="-DWITH_HW=0"
sim_hw=
*) sim_hw="$sim_hw $i" ; sim_hw_objs="$sim_hw_objs dv-$i.o";;
esac
done
-fi
-if test x"$silent" != x"yes" && test "$sim_hw_p" = "yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-else
+ # mingw does not support sockser
+ case ${host} in
+ *mingw*) ;;
+ *) # TODO: We don't add dv-sockser to sim_hw as it is not a "real" device
+ # that you instatiate. Instead, other code will call into it directly.
+ # At some point, we should convert it over.
+ sim_hw_objs="$sim_hw_objs dv-sockser.o"
-if test "$sim_hw_p" != yes; then
- sim_hw_objs=
- sim_hw_cflags="-DWITH_HW=0"
- sim_hw=
-fi
-if test x"$silent" != x"yes"; then
- echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
-fi
-fi
+cat >>confdefs.h <<_ACEOF
+#define HAVE_DV_SOCKSER 1
+_ACEOF
-case " $hardware " in
- *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
+ ;;
+ esac
+ if test x"$silent" != x"yes"; then
+ echo "Setting hardware to $sim_hw_cflags, $sim_hw, $sim_hw_objs"
+ fi
+ case " $hardware " in
+ *" cfi "*) { $as_echo "$as_me:${as_lineno-$LINENO}: checking for log2 in -lm" >&5
$as_echo_n "checking for log2 in -lm... " >&6; }
if test "${ac_cv_lib_m_log2+set}" = set; then :
$as_echo_n "(cached) " >&6
fi
;;
-esac
+ esac
+fi
# The default model shouldn't matter as long as there's a BFD.
as_fn_error "conditional \"PLUGINS\" was never defined.
Usually this means the macro was only invoked conditionally." "$LINENO" 5
fi
+if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then
+ as_fn_error "conditional \"MAINTAINER_MODE\" was never defined.
+Usually this means the macro was only invoked conditionally." "$LINENO" 5
+fi
: ${CONFIG_STATUS=./config.status}