#! /bin/sh
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
# Guess values for system-dependent variables and create Makefiles.
# Generated automatically using autoconf version 2.12
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
--enable-sim-cflags=opts Extra CFLAGS for use in building simulator"
ac_help="$ac_help
--enable-sim-debug=opts Enable debugging flags"
+ac_help="$ac_help
+ --enable-sim-stdio Specify whether to use stdio for console input/output."
ac_help="$ac_help
--enable-sim-trace=opts Enable tracing flags"
+ac_help="$ac_help
+ --enable-sim-profile=opts Enable profiling flags"
# Initialize some variables set by options.
# The variables have the same names as the options, with
+echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
+echo "configure:602: checking how to run the C preprocessor" >&5
+# On Suns, sometimes $CPP names a directory.
+if test -n "$CPP" && test -d "$CPP"; then
+ CPP=
+fi
+if test -z "$CPP"; then
+if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ # This must be in double quotes, not single quotes, because CPP may get
+ # substituted into the Makefile and "${CC-cc}" will confuse make.
+ CPP="${CC-cc} -E"
+ # On the NeXT, cc -E runs the code through the compiler's parser,
+ # not just through cpp.
+ cat > conftest.$ac_ext <<EOF
+#line 617 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:623: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP="${CC-cc} -E -traditional-cpp"
+ cat > conftest.$ac_ext <<EOF
+#line 634 "configure"
+#include "confdefs.h"
+#include <assert.h>
+Syntax Error
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:640: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ :
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ CPP=/lib/cpp
+fi
+rm -f conftest*
+fi
+rm -f conftest*
+ ac_cv_prog_CPP="$CPP"
+fi
+ CPP="$ac_cv_prog_CPP"
+else
+ ac_cv_prog_CPP="$CPP"
+fi
+echo "$ac_t""$CPP" 1>&6
+
# autoconf.info says this should be called right after AC_INIT.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:582: checking host system type" >&5
+echo "configure:713: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:603: checking target system type" >&5
+echo "configure:734: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:621: checking build system type" >&5
+echo "configure:752: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:665: checking for $ac_word" >&5
+echo "configure:796: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:694: checking for $ac_word" >&5
+echo "configure:825: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:742: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:873: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
cross_compiling=$ac_cv_prog_cc_cross
cat > conftest.$ac_ext <<EOF
-#line 752 "configure"
+#line 883 "configure"
#include "confdefs.h"
main(){return(0);}
EOF
-if { (eval echo configure:756: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:887: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:776: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:907: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:781: checking whether we are using GNU C" >&5
+echo "configure:912: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:790: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:921: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:805: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:936: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:843: checking for a BSD compatible install" >&5
+echo "configure:974: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# Put a plausible default for CC_FOR_BUILD in Makefile.
-
if test "x$cross_compiling" = "xno"; then
CC_FOR_BUILD='$(CC)'
else
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:909: checking for $ac_word" >&5
+echo "configure:1039: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
+# Check for common headers.
+# FIXME: Seems to me this can cause problems for i386-windows hosts.
+# At one point there were hardcoded AC_DEFINE's if ${host} = i386-*-windows*.
+for ac_hdr in stdlib.h string.h strings.h unistd.h time.h sys/time.h sys/resource.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:1073: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1078 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
+EOF
+ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
+{ (eval echo configure:1083: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+ac_err=`grep -v '^ *+' conftest.out`
+if test -z "$ac_err"; then
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=yes"
+else
+ echo "$ac_err" >&5
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_header_$ac_safe=no"
+fi
+rm -f conftest*
+fi
+if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_hdr 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+for ac_func in getrusage time
+do
+echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
+echo "configure:1112: checking for $ac_func" >&5
+if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1117 "configure"
+#include "confdefs.h"
+/* System header to define __stub macros and hopefully few prototypes,
+ which can conflict with char $ac_func(); below. */
+#include <assert.h>
+/* Override any gcc2 internal prototype to avoid an error. */
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char $ac_func();
+
+int main() {
+
+/* The GNU C library defines this for functions which it implements
+ to always fail with ENOSYS. Some functions are actually named
+ something starting with __ and the normal name is an alias. */
+#if defined (__stub_$ac_func) || defined (__stub___$ac_func)
+choke me
+#else
+$ac_func();
+#endif
+
+; return 0; }
+EOF
+if { (eval echo configure:1140: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=yes"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ eval "ac_cv_func_$ac_func=no"
+fi
+rm -f conftest*
+fi
+
+if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then
+ echo "$ac_t""yes" 1>&6
+ ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'`
+ cat >> confdefs.h <<EOF
+#define $ac_tr_func 1
+EOF
+
+else
+ echo "$ac_t""no" 1>&6
+fi
+done
+
+
. ${srcdir}/../../bfd/configure.host
if test "${enable_sim_bswap+set}" = set; then
enableval="$enable_sim_bswap"
case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";;
+ yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP=1";;
no) sim_bswap="-DWITH_BSWAP=0";;
*) { echo "configure: error: "--enable-sim-bswap does not take a value"" 1>&2; exit 1; }; sim_bswap="";;
esac
if test "${enable_sim_debug+set}" = set; then
enableval="$enable_sim_debug"
case "${enableval}" in
- yes) sim_debug="-DDEBUG=7";;
- no) sim_debug="-DDEBUG=0";;
- *) sim_debug="-DDEBUG='(${enableval})'";;
+ yes) sim_debug="-DDEBUG=7 -DWITH_DEBUG=7";;
+ no) sim_debug="-DDEBUG=0 -DWITH_DEBUG=0";;
+ *) sim_debug="-DDEBUG='(${enableval})' -DWITH_DEBUG='(${enableval})'";;
esac
if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then
echo "Setting sim debug = $sim_debug" 6>&1
+# Check whether --enable-sim-stdio or --disable-sim-stdio was given.
+if test "${enable_sim_stdio+set}" = set; then
+ enableval="$enable_sim_stdio"
+ case "${enableval}" in
+ yes) sim_stdio="-DWITH_STDIO=DO_USE_STDIO";;
+ no) sim_stdio="-DWITH_STDIO=DONT_USE_STDIO";;
+ *) { echo "configure: error: "Unknown value $enableval passed to --enable-sim-stdio"" 1>&2; exit 1; }; sim_stdio="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_stdio" != x""; then
+ echo "Setting stdio flags = $sim_stdio" 6>&1
+fi
+else
+ sim_stdio=""
+fi
+
+
+
# Check whether --enable-sim-trace or --disable-sim-trace was given.
if test "${enable_sim_trace+set}" = set; then
enableval="$enable_sim_trace"
case "${enableval}" in
- yes) sim_trace="-DTRACE=1";;
- no) sim_trace="-DTRACE=0";;
- *) sim_trace="-DTRACE='(${enableval})'";;
+ yes) sim_trace="-DTRACE=1 -DWITH_TRACE=-1";;
+ no) sim_trace="-DTRACE=0 -DWITH_TRACE=0";;
+ [-0-9]*)
+ sim_trace="-DTRACE='(${enableval})' -DWITH_TRACE='(${enableval})'";;
+ [a-z]*)
+ sim_trace=""
+ for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ if test x"$sim_trace" = x; then
+ sim_trace="-DWITH_TRACE='(TRACE_$x"
+ else
+ sim_trace="${sim_trace}|TRACE_$x"
+ fi
+ done
+ sim_trace="$sim_trace)'" ;;
esac
if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then
echo "Setting sim trace = $sim_trace" 6>&1
-sim_link_files=
-sim_link_links=
-
-sim_link_links=tconfig.h
-if test -f ${srcdir}/tconfig.in
-then
- sim_link_files=tconfig.in
+# Check whether --enable-sim-profile or --disable-sim-profile was given.
+if test "${enable_sim_profile+set}" = set; then
+ enableval="$enable_sim_profile"
+ case "${enableval}" in
+ yes) sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1";;
+ no) sim_profile="-DPROFILE=0 -DWITH_PROFILE=0";;
+ [-0-9]*)
+ sim_profile="-DPROFILE='(${enableval})' -DWITH_PROFILE='(${enableval})'";;
+ [a-z]*)
+ sim_profile=""
+ for x in `echo "$enableval" | sed -e "s/,/ /g"`; do
+ if test x"$sim_profile" = x; then
+ sim_profile="-DWITH_PROFILE='(PROFILE_$x"
+ else
+ sim_profile="${sim_profile}|PROFILE_$x"
+ fi
+ done
+ sim_profile="$sim_profile)'" ;;
+esac
+if test x"$silent" != x"yes" && test x"$sim_profile" != x""; then
+ echo "Setting sim profile = $sim_profile" 6>&1
+fi
else
- sim_link_files=../common/tconfig.in
+ sim_profile=""
fi
-# targ-vals.def points to the libc macro description file.
-case "${target}" in
-*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
-esac
-sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
-sim_link_links="${sim_link_links} targ-vals.def"
-
-echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6
-echo "configure:1030: checking how to run the C preprocessor" >&5
-# On Suns, sometimes $CPP names a directory.
-if test -n "$CPP" && test -d "$CPP"; then
- CPP=
-fi
-if test -z "$CPP"; then
-if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then
+echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
+echo "configure:1295: checking return type of signal handlers" >&5
+if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # This must be in double quotes, not single quotes, because CPP may get
- # substituted into the Makefile and "${CC-cc}" will confuse make.
- CPP="${CC-cc} -E"
- # On the NeXT, cc -E runs the code through the compiler's parser,
- # not just through cpp.
cat > conftest.$ac_ext <<EOF
-#line 1045 "configure"
+#line 1300 "configure"
#include "confdefs.h"
-#include <assert.h>
-Syntax Error
+#include <sys/types.h>
+#include <signal.h>
+#ifdef signal
+#undef signal
+#endif
+#ifdef __cplusplus
+extern "C" void (*signal (int, void (*)(int)))(int);
+#else
+void (*signal ()) ();
+#endif
+
+int main() {
+int i;
+; return 0; }
EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1051: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
+if { (eval echo configure:1317: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
- CPP="${CC-cc} -E -traditional-cpp"
- cat > conftest.$ac_ext <<EOF
-#line 1062 "configure"
-#include "confdefs.h"
-#include <assert.h>
-Syntax Error
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1068: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out`
-if test -z "$ac_err"; then
- :
+ ac_cv_type_signal=void
else
- echo "$ac_err" >&5
echo "configure: failed program was:" >&5
cat conftest.$ac_ext >&5
rm -rf conftest*
- CPP=/lib/cpp
+ ac_cv_type_signal=int
fi
rm -f conftest*
fi
-rm -f conftest*
- ac_cv_prog_CPP="$CPP"
-fi
- CPP="$ac_cv_prog_CPP"
+
+echo "$ac_t""$ac_cv_type_signal" 1>&6
+cat >> confdefs.h <<EOF
+#define RETSIGTYPE $ac_cv_type_signal
+EOF
+
+
+
+
+sim_link_files=
+sim_link_links=
+
+sim_link_links=tconfig.h
+if test -f ${srcdir}/tconfig.in
+then
+ sim_link_files=tconfig.in
else
- ac_cv_prog_CPP="$CPP"
+ sim_link_files=../common/tconfig.in
fi
-echo "$ac_t""$CPP" 1>&6
+
+# targ-vals.def points to the libc macro description file.
+case "${target}" in
+*-*-*) TARG_VALS_DEF=../common/nltvals.def ;;
+esac
+sim_link_files="${sim_link_files} ${TARG_VALS_DEF}"
+sim_link_links="${sim_link_links} targ-vals.def"
+
+
for ac_hdr in unistd.h
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1094: checking for $ac_hdr" >&5
+echo "configure:1361: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 1099 "configure"
+#line 1366 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1104: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1371: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out`
if test -z "$ac_err"; then
rm -rf conftest*
-
-
-
-
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
ac_given_srcdir=$srcdir
ac_given_INSTALL="$INSTALL"
-trap 'rm -fr `echo "Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
+trap 'rm -fr `echo "Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15
EOF
cat >> $CONFIG_STATUS <<EOF
s/@@/%@/; s/@@/@%/; s/@g\$/%g/' > conftest.subs <<\\CEOF
$ac_vpsub
$extrasub
+s%@sim_alignment@%$sim_alignment%g
+s%@sim_assert@%$sim_assert%g
+s%@sim_endian@%$sim_endian%g
+s%@sim_hostendian@%$sim_hostendian%g
+s%@sim_float@%$sim_float%g
+s%@sim_scache@%$sim_scache%g
+s%@sim_default_model@%$sim_default_model%g
+s%@sim_hardware@%$sim_hardware%g
+s%@sim_inline@%$sim_inline%g
+s%@sim_packages@%$sim_packages%g
+s%@sim_regparm@%$sim_regparm%g
+s%@sim_reserved_bits@%$sim_reserved_bits%g
+s%@sim_smp@%$sim_smp%g
+s%@sim_stdcall@%$sim_stdcall%g
+s%@sim_xor_endian@%$sim_xor_endian%g
+s%@sim_warnings@%$sim_warnings%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
s%@HDEFINES@%$HDEFINES%g
s%@AR@%$AR%g
s%@RANLIB@%$RANLIB%g
+s%@CPP@%$CPP%g
s%@sim_bswap@%$sim_bswap%g
s%@sim_cflags@%$sim_cflags%g
s%@sim_debug@%$sim_debug%g
+s%@sim_stdio@%$sim_stdio%g
s%@sim_trace@%$sim_trace%g
-s%@CPP@%$CPP%g
-s%@sim_endian@%$sim_endian%g
-s%@sim_hostendian@%$sim_hostendian%g
-s%@sim_inline@%$sim_inline%g
-s%@sim_warnings@%$sim_warnings%g
+s%@sim_profile@%$sim_profile%g
CEOF
EOF
cat >> $CONFIG_STATUS <<EOF
-CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in"}
+CONFIG_FILES=\${CONFIG_FILES-"Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in .gdbinit:../common/gdbinit.in"}
EOF
cat >> $CONFIG_STATUS <<\EOF
for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then
EOF
cat >> $CONFIG_STATUS <<\EOF
-case "x$CONFIG_FILES" in xMakefile*)
+case "x$CONFIG_FILES" in
+ xMakefile*)
echo "Merging Makefile.sim+Make-common.sim into Makefile ..."
rm -f Makesim1.tmp Makesim2.tmp Makefile
sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' <Make-common.sim >Makesim1.tmp
projects / deliverable / binutils-gdb.git / blobdiff