# Makefile template for Configure for the m32r simulator
-# Copyright (C) 1996, 1997, 1998 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2003 Free Software Foundation, Inc.
# Contributed by Cygnus Support.
#
# This file is part of GDB, the GNU debugger.
## COMMON_PRE_CONFIG_FRAG
-M32R_OBJS = m32r.o cpu.o decode.o extract.o sem.o model.o mloop.o
-# start-sanitize-m32rx
-M32RX_OBJS = m32rx.o cpux.o decodex.o extractx.o modelx.o mloopx.o
-# end-sanitize-m32rx
+M32R_OBJS = m32r.o cpu.o decode.o sem.o model.o mloop.o
+M32RX_OBJS = m32rx.o cpux.o decodex.o modelx.o mloopx.o
+M32R2_OBJS = m32r2.o cpu2.o decode2.o model2.o mloop2.o
CONFIG_DEVICES = dv-sockser.o
CONFIG_DEVICES =
cgen-run.o sim-reason.o sim-engine.o sim-stop.o \
sim-if.o arch.o \
$(M32R_OBJS) \
- $(start-sanitize-m32rx) \
$(M32RX_OBJS) \
- $(end-sanitize-m32rx) \
+ $(M32R2_OBJS) \
traps.o devices.o \
$(CONFIG_DEVICES)
# Extra headers included by sim-main.h.
SIM_EXTRA_DEPS = \
- $(srcdir)/../common/cgen-types.h \
- $(srcdir)/../common/cgen-sim.h \
- $(srcdir)/../common/cgen-trace.h \
- arch.h cpuall.h m32r-sim.h cpu-opc.h \
- $(srcdir)/../../include/opcode/cgen.h
+ $(CGEN_INCLUDE_DEPS) \
+ arch.h cpuall.h m32r-sim.h $(srcdir)/../../opcodes/m32r-desc.h
SIM_EXTRA_CFLAGS =
arch = m32r
-MAIN_INCLUDE_DEPS = \
- sim-main.h \
- $(srcdir)/../common/sim-config.h \
- $(srcdir)/../common/sim-base.h \
- $(srcdir)/../common/sim-basics.h \
- $(srcdir)/../common/sim-module.h \
- $(srcdir)/../common/sim-trace.h \
- $(srcdir)/../common/sim-profile.h \
- tconfig.h
-INCLUDE_DEPS = $(MAIN_INCLUDE_DEPS) $(SIM_EXTRA_DEPS)
-OPS_INCLUDE_DEPS = \
- $(srcdir)/../common/cgen-mem.h \
- $(srcdir)/../common/cgen-ops.h
+sim-if.o: sim-if.c $(SIM_MAIN_DEPS) $(srcdir)/../common/sim-core.h
-sim-if.o: sim-if.c $(INCLUDE_DEPS) $(srcdir)/../common/sim-core.h
+arch.o: arch.c $(SIM_MAIN_DEPS)
-arch.o: arch.c $(INCLUDE_DEPS)
-
-devices.o: devices.c $(INCLUDE_DEPS)
+traps.o: traps.c targ-vals.h $(SIM_MAIN_DEPS)
+devices.o: devices.c $(SIM_MAIN_DEPS)
# M32R objs
-m32r.o: m32r.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpu.h decode.h
+M32RBF_INCLUDE_DEPS = \
+ $(CGEN_MAIN_CPU_DEPS) \
+ cpu.h decode.h eng.h
+
+m32r.o: m32r.c $(M32RBF_INCLUDE_DEPS)
# FIXME: Use of `mono' is wip.
-mloop.c: $(srcdir)/../common/genmloop.sh mloop.in Makefile
- rm -f mloop.c
- $(SHELL) $(srcdir)/../common/genmloop.sh $(SHELL) \
+mloop.c eng.h: stamp-mloop
+stamp-mloop: $(srcdir)/../common/genmloop.sh mloop.in Makefile
+ $(SHELL) $(srccom)/genmloop.sh \
-mono -fast -pbb -switch sem-switch.c \
- m32rbf $(srcdir)/mloop.in \
- | sed -e 's/@cpu@/m32rbf/' -e 's/@CPU@/M32RBF/' >mloop.c
-mloop.o: mloop.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) stamp-cpu
+ -cpu m32rbf -infile $(srcdir)/mloop.in
+ $(SHELL) $(srcroot)/move-if-change eng.hin eng.h
+ $(SHELL) $(srcroot)/move-if-change mloop.cin mloop.c
+ touch stamp-mloop
+mloop.o: mloop.c sem-switch.c $(M32RBF_INCLUDE_DEPS)
-cpu.o: cpu.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpu.h
-decode.o: decode.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpu.h decode.h
-extract.o: extract.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpu.h decode.h
-sem.o: sem.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpu.h decode.h
-model.o: model.c $(INCLUDE_DEPS) cpu.h decode.h
+cpu.o: cpu.c $(M32RBF_INCLUDE_DEPS)
+decode.o: decode.c $(M32RBF_INCLUDE_DEPS)
+sem.o: sem.c $(M32RBF_INCLUDE_DEPS)
+model.o: model.c $(M32RBF_INCLUDE_DEPS)
-# start-sanitize-m32rx
# M32RX objs
-m32rx.o: m32rx.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpux.h decodex.h
+M32RXF_INCLUDE_DEPS = \
+ $(CGEN_MAIN_CPU_DEPS) \
+ cpux.h decodex.h engx.h
+
+m32rx.o: m32rx.c $(M32RXF_INCLUDE_DEPS)
# FIXME: Use of `mono' is wip.
-mloopx.c: $(srcdir)/../common/genmloop.sh mloopx.in Makefile
- rm -f mloopx.c
- $(SHELL) $(srcdir)/../common/genmloop.sh $(SHELL) \
- -mono -no-fast -pbb -parallel -switch semx-switch.c \
- m32rxf $(srcdir)/mloopx.in \
- | sed -e 's/@cpu@/m32rxf/' -e 's/@CPU@/M32RXF/' >mloopx.c
-mloopx.o: mloopx.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) stamp-xcpu
-
-cpux.o: cpux.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpux.h decodex.h
-decodex.o: decodex.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpux.h decodex.h
-extractx.o: extractx.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpux.h decodex.h
-#semx.o: semx.c $(INCLUDE_DEPS) $(OPS_INCLUDE_DEPS) cpux.h decodex.h
-modelx.o: modelx.c $(INCLUDE_DEPS) cpux.h decodex.h
-# end-sanitize-m32rx
+mloopx.c engx.h: stamp-xmloop
+stamp-xmloop: $(srcdir)/../common/genmloop.sh mloopx.in Makefile
+ $(SHELL) $(srccom)/genmloop.sh \
+ -mono -no-fast -pbb -parallel-write -switch semx-switch.c \
+ -cpu m32rxf -infile $(srcdir)/mloopx.in
+ $(SHELL) $(srcroot)/move-if-change eng.hin engx.h
+ $(SHELL) $(srcroot)/move-if-change mloop.cin mloopx.c
+ touch stamp-xmloop
+mloopx.o: mloopx.c semx-switch.c $(M32RXF_INCLUDE_DEPS)
+
+cpux.o: cpux.c $(M32RXF_INCLUDE_DEPS)
+decodex.o: decodex.c $(M32RXF_INCLUDE_DEPS)
+semx.o: semx.c $(M32RXF_INCLUDE_DEPS)
+modelx.o: modelx.c $(M32RXF_INCLUDE_DEPS)
+
+# M32R2 objs
+
+M32R2F_INCLUDE_DEPS = \
+ $(CGEN_MAIN_CPU_DEPS) \
+ cpu2.h decode2.h eng2.h
+
+m32r2.o: m32r2.c $(M32R2F_INCLUDE_DEPS)
+
+# FIXME: Use of `mono' is wip.
+mloop2.c eng2.h: stamp-2mloop
+stamp-2mloop: $(srcdir)/../common/genmloop.sh mloop2.in Makefile
+ $(SHELL) $(srccom)/genmloop.sh \
+ -mono -no-fast -pbb -parallel-write -switch sem2-switch.c \
+ -cpu m32r2f -infile $(srcdir)/mloop2.in
+ $(SHELL) $(srcroot)/move-if-change eng.hin eng2.h
+ $(SHELL) $(srcroot)/move-if-change mloop.cin mloop2.c
+ touch stamp-2mloop
+
+mloop2.o: mloop2.c sem2-switch.c $(M32R2F_INCLUDE_DEPS)
+cpu2.o: cpu2.c $(M32R2F_INCLUDE_DEPS)
+decode2.o: decode2.c $(M32R2F_INCLUDE_DEPS)
+sem2.o: sem2.c $(M32R2F_INCLUDE_DEPS)
+model2.o: model2.c $(M32R2F_INCLUDE_DEPS)
m32r-clean:
- rm -f mloop.c stamp-arch stamp-cpu
-# start-sanitize-m32rx
- rm -f mloopx.c stamp-xcpu
-# end-sanitize-m32rx
+ rm -f mloop.c eng.h stamp-mloop
+ rm -f mloopx.c engx.h stamp-xmloop
+ rm -f mloop2.c eng2.h stamp-2mloop
+ rm -f stamp-arch stamp-cpu stamp-xcpu stamp-2cpu
rm -f tmp-*
-# start-sanitize-cygnus
# cgen support, enable with --enable-cgen-maint
CGEN_MAINT = ; @true
# The following line is commented in or out depending upon --enable-cgen-maint.
@CGEN_MAINT@CGEN_MAINT =
-stamp-arch: $(CGEN_MAIN_SCM) $(srccgen)/m32r.cpu
- $(MAKE) cgen-arch $(CGEN_FLAGS_TO_PASS)
+stamp-arch: $(CGEN_READ_SCM) $(CGEN_ARCH_SCM) $(CGEN_CPU_DIR)/m32r.cpu
+ $(MAKE) cgen-arch $(CGEN_FLAGS_TO_PASS) mach=all \
+ archfile=$(CGEN_CPU_DIR)/m32r.cpu \
+ FLAGS="with-scache with-profile=fn"
touch stamp-arch
arch.h arch.c cpuall.h: $(CGEN_MAINT) stamp-arch
- @true
-stamp-cpu: $(CGEN_MAIN_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(srccgen)/m32r.cpu
+stamp-cpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CGEN_CPU_DIR)/m32r.cpu
$(MAKE) cgen-cpu-decode $(CGEN_FLAGS_TO_PASS) \
- cpu=m32rbf mach=m32r SUFFIX= FLAGS="with-scache,with-profile fn" EXTRAFILES="$(CGEN_CPU_EXTR) $(CGEN_CPU_SEM) $(CGEN_CPU_SEMSW)"
+ cpu=m32rbf mach=m32r SUFFIX= \
+ archfile=$(CGEN_CPU_DIR)/m32r.cpu \
+ FLAGS="with-scache with-profile=fn" \
+ EXTRAFILES="$(CGEN_CPU_SEM) $(CGEN_CPU_SEMSW)"
touch stamp-cpu
-cpu.h extract.c sem.c sem-switch.c model.c decode.c decode.h: $(CGEN_MAINT) stamp-cpu
- @true
-# end-sanitize-cygnus
+cpu.h sem.c sem-switch.c model.c decode.c decode.h: $(CGEN_MAINT) stamp-cpu
-# start-sanitize-m32rx
-stamp-xcpu: $(CGEN_MAIN_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(srccgen)/m32r.cpu
+stamp-xcpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CGEN_CPU_DIR)/m32r.cpu
$(MAKE) cgen-cpu-decode $(CGEN_FLAGS_TO_PASS) \
- cpu=m32rxf mach=m32rx SUFFIX=x FLAGS="with-scache,with-profile fn" EXTRAFILES="$(CGEN_CPU_EXTR) $(CGEN_CPU_SEMSW)"
+ cpu=m32rxf mach=m32rx SUFFIX=x \
+ archfile=$(CGEN_CPU_DIR)/m32r.cpu \
+ FLAGS="with-scache with-profile=fn" \
+ EXTRAFILES="$(CGEN_CPU_SEMSW)"
touch stamp-xcpu
-cpux.h extractx.c semx-switch.c modelx.c decodex.c decodex.h: $(CGEN_MAINT) stamp-xcpu
- @true
-# end-sanitize-m32rx
+cpux.h semx-switch.c modelx.c decodex.c decodex.h: $(CGEN_MAINT) stamp-xcpu
+
+stamp-2cpu: $(CGEN_READ_SCM) $(CGEN_CPU_SCM) $(CGEN_DECODE_SCM) $(CGEN_CPU_DIR)/m32r.cpu
+ $(MAKE) cgen-cpu-decode $(CGEN_FLAGS_TO_PASS) \
+ cpu=m32r2f mach=m32r2 SUFFIX=2 \
+ archfile=$(CGEN_CPU_DIR)/m32r.cpu \
+ FLAGS="with-scache with-profile=fn" \
+ EXTRAFILES="$(CGEN_CPU_SEMSW)"
+ touch stamp-2cpu
+cpu2.h sem2-switch.c model2.c decode2.c decode2.h: $(CGEN_MAINT) stamp-2cpu
projects / deliverable / binutils-gdb.git / blobdiff