+2016-01-02 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (SIM_AC_OPTION_ENDIAN): Change BIG_ENDIAN to BIG.
+ * configure: Regenerate.
+
+2015-12-30 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Change LITTLE_ENDIAN to BIG_ENDIAN.
+ * configure: Regenerate.
+
+2015-12-30 Mike Frysinger <vapier@gentoo.org>
+
+ * imterp.c (sim_open): Delete current_alignment and
+ current_target_byte_order assignments.
+ * configure.ac: Call SIM_AC_OPTION_ENDIAN.
+ * configure: Regenerate.
+
+2015-12-30 Mike Frysinger <vapier@gentoo.org>
+
+ * wrapper.c (m68hc11_reg_store, m68hc11_reg_fetch): Define.
+ (sim_open): Call CPU_REG_FETCH/CPU_REG_STORE.
+ (sim_store_register): Rename to ...
+ (m68hc11_reg_store): ... this. Delete local cpu var.
+ (sim_fetch_register): Rename to ...
+ (m68hc11_reg_fetch): ... this. Delete local cpu var.
+
+2015-12-27 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Delete sim-hload.o.
+
+2015-12-26 Mike Frysinger <vapier@gentoo.org>
+
+ * config.in, configure: Regenerate.
+
+2015-12-24 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h (SIM_HANDLES_LMA): Delete.
+
+2015-12-24 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h (WITH_WATCHPOINTS): Delete.
+
+2015-11-17 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h (WITH_MODULO_MEMORY): Delete.
+
+2015-11-15 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Delete sim-reason.o and sim-stop.o.
+
+2015-11-14 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Delete sim-load.o.
+
+2015-11-14 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (sim_close): Delete.
+
+2015-06-23 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2015-06-12 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2015-06-12 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2015-06-11 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (interrupt_names): Delete.
+
+2015-06-11 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Add sim-resume.o
+ * interp.c (has_stepped, sim_resume): Delete.
+
+2015-06-11 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (INLINE): Delete define.
+
+2015-04-29 Nick Clifton <nickc@redhat.com>
+
+ PR 18273
+ * gencode.c (gen_fetch_operands): Remove unreachable code.
+
+2015-04-18 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h (SIM_CPU): Delete.
+
+2015-04-18 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h (sim_cia): Delete.
+
+2015-04-17 Mike Frysinger <vapier@gentoo.org>
+
+ * sim-main.h (CIA_GET, CIA_SET): Delete.
+
+2015-04-15 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Delete sim-cpu.o.
+ * sim-main.h (STATE_CPU): Delete.
+
+2015-04-13 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2015-04-13 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Add sim-cpu.o.
+ * interp.c (m68hc11_pc_get, m68hc11_pc_set): New functions.
+ (sim_open): Declare new local var i. Call sim_cpu_alloc_all.
+ Call CPU_PC_FETCH & CPU_PC_STORE for all cpus.
+ (sim_pc_get): Delete.
+ * sim-main.h (SIM_CPU): Define.
+ (STATE_CPU): Drop &.
+ (struct sim_state): Change cpu to an array of pointers.
+
+2015-04-06 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_OBJS): Delete sim-engine.o and sim-hrw.o.
+
+2015-03-31 Mike Frysinger <vapier@gentoo.org>
+
+ * m68hc11_sim.c (cpu_get_indexed_operand_addr,
+ cpu_get_indexed_operand8, cpu_get_indexed_operand16): Rename restrict
+ variable to restricted.
+ * sim-main.h (cpu_get_indexed_operand_addr): Likewise.
+
+2015-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (sim_pc_get): New function.
+
+2015-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * compile.c (sim_set_profile, sim_set_profile_size, sim_set_callbacks,
+ sim_size, sim_trace): Delete.
+ * sim-main.h (sim_set_profile, sim_set_profile_size): Delete.
+
+2015-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2015-03-23 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2015-03-23 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+ * configure.ac (m68hc11_extra_objs): Delete.
+ * Makefile.in (SIM_OBJS): Delete SIM_EXTRA_OBJS.
+ (SIM_EXTRA_OBJS): Delete.
+
+2015-03-16 Mike Frysinger <vapier@gentoo.org>
+
+ * config.in, configure: Regenerate.
+
+2015-03-14 Mike Frysinger <vapier@gentoo.org>
+
+ * Makefile.in (SIM_RUN_OBJS): Delete.
+
+2015-03-14 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac (AC_CHECK_HEADERS): Delete.
+ * aclocal.m4, configure: Regenerate.
+
+2014-08-19 Alan Modra <amodra@gmail.com>
+
+ * configure: Regenerate.
+
+2014-08-15 Roland McGrath <mcgrathr@google.com>
+
+ * configure: Regenerate.
+ * config.in: Regenerate.
+
+2014-03-04 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2013-09-23 Alan Modra <amodra@gmail.com>
+
+ * configure: Regenerate.
+
+2013-06-03 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, configure: Regenerate.
+
+2013-05-10 Freddie Chopin <freddie_chopin@op.pl>
+
+ * configure: Rebuild.
+
+2013-03-26 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate.
+
+2013-03-23 Joel Sherrill <joel.sherrill@oarcorp.com>
+
+ * configure.ac: Use $SIM_DV_SOCKSER_O.
+ * configure: Regenerated.
+
+2012-06-15 Joel Brobecker <brobecker@adacore.com>
+
+ * config.in, configure: Regenerate.
+
+2012-03-24 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4, config.in, configure: Regenerate.
+
+2011-12-03 Mike Frysinger <vapier@gentoo.org>
+
+ * aclocal.m4: New file.
+ * configure: Regenerate.
+
+2011-10-19 Mike Frysinger <vapier@gentoo.org>
+
+ * configure: Regenerate after common/acinclude.m4 update.
+
+2011-10-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Change include to common/acinclude.m4.
+
+2011-10-17 Mike Frysinger <vapier@gentoo.org>
+
+ * configure.ac: Change AC_PREREQ to 2.64. Delete AC_CONFIG_HEADER
+ call. Replace common.m4 include with SIM_AC_COMMON.
+ * configure: Regenerate.
+
+2011-07-05 Mike Frysinger <vapier@gentoo.org>
+
+ * interp.c (sim_do_command): Delete.
+
+2010-01-09 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * configure: Regenerate.
+
+2009-08-22 Ralf Wildenhues <Ralf.Wildenhues@gmx.de>
+
+ * config.in: Regenerate.
+ * configure: Likewise.
+
+ * configure: Regenerate.
+
+2008-07-11 Hans-Peter Nilsson <hp@axis.com>
+
+ * configure: Regenerate to track ../common/common.m4 changes.
+ * config.in: Ditto.
+
+2008-06-06 Vladimir Prus <vladimir@codesourcery.com>
+ Daniel Jacobowitz <dan@codesourcery.com>
+ Joseph Myers <joseph@codesourcery.com>
+
+ * configure: Regenerate.
+
+2006-12-21 Hans-Peter Nilsson <hp@axis.com>
+
+ * config.in: Regenerate.
+
+2006-06-13 Richard Earnshaw <rearnsha@arm.com>
+
+ * configure: Regenerated.
+
+2006-06-05 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure: Regenerated.
+
+2006-05-31 Daniel Jacobowitz <dan@codesourcery.com>
+
+ * configure: Regenerated.
+
+2006-03-29 Hans-Peter Nilsson <hp@axis.com>
+
+ * configure: Regenerate.
+
+2005-03-23 Mark Kettenis <kettenis@gnu.org>
+
+ * configure: Regenerate.
+
+2005-01-14 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: Sinclude aclocal.m4 before common.m4. Add
+ explicit call to AC_CONFIG_HEADER.
+ * configure: Regenerate.
+
+2005-01-11 Andrew Cagney <cagney@localhost.localdomain>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+2005-01-07 Andrew Cagney <cagney@gnu.org>
+
+ * configure.ac: Rename configure.in, require autoconf 2.59.
+ * configure: Re-generate.
+
+2004-12-08 Hans-Peter Nilsson <hp@axis.com>
+
+ * configure: Regenerate for ../common/aclocal.m4 update.
+
+2004-06-15 Alan Modra <amodra@bigpond.net.au>
+
+ * interp.c (sim_prepare_for_program): Use bfd_get_section_size
+ instead of bfd_get_section_size_before_reloc.
+
+2003-08-08 Stephane Carrez <stcarrez@nerim.fr>
+
+ * dv-m68hc11tim.c (cycle_to_string): Add flags parameter to better
+ control the translation.
+ (m68hc11tim_print_timer): Update cycle_to_string conversion.
+ (m68hc11tim_timer_event): Fix handling of output
+ compare register with its interrupts.
+ (m68hc11tim_io_write_buffer): Check output compare
+ after setting M6811_TMSK1.
+ (m68hc11tim_io_read_buffer): Fix compilation warning.
+ * dv-m68hc11.c (m68hc11_option_handler): Likewise.
+ * dv-m68hc11spi.c (m68hc11spi_info): Likewise.
+ * dv-m68hc11sio.c (m68hc11sio_info): Likewise.
+ * interrupts.c (interrupts_info): Likewise.
+ (interrupts_reset): Recognize bootstrap mode.
+ * sim-main.h (PRINT_CYCLE, PRINT_TIME): New defines.
+ (_sim_cpu): Add cpu_start_mode.
+ (cycle_to_string): Add flags member.
+ * m68hc11_sim.c (OPTION_CPU_BOOTSTRAP): New option.
+ (cpu_options): Declare new option bootstrap.
+ (cpu_option_handler): Handle it.
+ (cpu_info): Update call to cycle_to_string.
+
+2003-08-08 Stephane Carrez <stcarrez@nerim.fr>
+
+ * sim-main.h (phys_to_virt): Use memory bank parameters to translate
+ the physical address in virtual address.
+ (struct _sim_cpu): Add memory bank members.
+ * m68hc11_sim.c (cpu_initialize): Clear memory bank parameters.
+ * interp.c (sim_hw_configure): Create memory bank according to memory
+ bank parameters.
+ (sim_get_bank_parameters): New function to obtain memory bank config
+ from the symbol table.
+ (sim_prepare_for_program): Call it to obtain the memory bank parameters.
+ (sim_open): Call sim_prepare_for_program.
+ * dv-m68hc11.c (m68hc11cpu_io_write_buffer): Use memory bank parameters
+ to check if address is within bank window.
+ (m68hc11cpu_io_read_buffer): Likewise.
+ (attach_m68hc11_regs): Map the memory bank according to memory bank
+ parameters.
+
+2003-08-08 Stephane Carrez <stcarrez@nerim.fr>,
+
+ * sim-main.h (PAGE_REGNUM, Z_REGNUM): Use same numbering as gdb.
+
+2003-08-08 Stephane Carrez <stcarrez@nerim.fr>,
+ Gary Piercey <gpiercey@northstar-technical.com>
+
+ * m68hc11_sim.c (print_io_word): New function to print 16-bit value.
+ * sim-main.h (print_io_word): Declare.
+ * dv-m68hc11tim.c (tmsk1_desc): New description table for TMSK1.
+ (tflg1_desc): Likewise for TFLG1.
+ (m68hc11tim_info): Print input and output compare registers
+
+2003-03-02 Stephane Carrez <stcarrez@nerim.fr>
+
+ * Makefile.in (SIM_EXTRA_CFLAGS): Set WITH_TARGET_ADDRESS_BITSIZE
+ to 32 to support memory bank switching; temporarily use 32-bit for
+ WORD_BITSIZE to avoid a bug in sim-common.
+
+2003-03-01 Stephane Carrez <stcarrez@nerim.fr>
+
+ * interp.c (sim_fetch_register): Only store a single byte for
+ 1 byte registers.
+
+2003-02-27 Andrew Cagney <cagney@redhat.com>
+
+ * interp.c (sim_prepare_for_program, sim_open)
+ (sim_create_inferior): Rename _bfd to bfd.
+
+2002-08-13 Stephane Carrez <stcarrez@nerim.fr>
+
+ * dv-m68hc11eepr.c (struct m68hc11eepr ): Use const char* for filename.
+
+2002-08-13 Marko Kohtala <marko.kohtala@luukku.com>
+
+ * interp.c (sim_prepare_for_program): Look up the image for the
+ reset vector and set cpu_use_elf_start to 1 if not found.
+ (sim_open): Do not set cpu_use_elf_start.
+
+2002-08-13 Marko Kohtala <marko.kohtala@luukku.com>
+
+ * interp.c (sim_hw_configure): Return 1 for success.
+ (sim_prepare_for_program): Use the sim_hw_configure exit code to
+ return SIM_RC_FAIL.
+
+2002-08-13 Stephane Carrez <stcarrez@nerim.fr>
+
+ * dv-m68hc11.c (m68hc11cpu_io_read_buffer): Translate memory
+ bank window to some virtual address to read from extended memory.
+ (m68hc11cpu_io_write_buffer): Likewise for writing.
+ (attach_m68hc11_regs): When use_bank property is defined, attach
+ to the 68HC12 16K memory bank window.
+ * interp.c (sim_hw_configure): Create memory region for banked
+ memory.
+
+2002-08-13 Stephane Carrez <Stephane.Carrez@nerim.fr>
+
+ * interp.c (sim_hw_configure): Connect port-X to cpu-write-port.
+ * dv-m68hc11.c (m68hc11cpu_ports): Add cpu-write-port input.
+ (m68hc11cpu_port_event): Handle CPU_WRITE_PORT event.
+
+2002-08-13 Marko Kohtala <marko.kohtala@luukku.com>
+
+ * dv-m68hc11.c (m68hc11cpu_io_write): Fix to update IO mapping
+ when IO mapping changed, not when internal RAM mapping is changed.
+
+2002-08-13 Stephane Carrez <stcarrez@nerim.fr>
+
+ * m68hc11_sim.c (cpu_special): Handle call and rtc instructions.
+ * sim-main.h (M6812_CALL_INDIRECT): Add to enum.
+ (m6811_regs): Add page register.
+ (cpu_set_page, cpu_get_page): New macros.
+ (phys_to_virt): New function.
+ (cpu_get_indexed_operand_addr, cpu_return): Declare.
+ * gencode.c: Identify indirect addressing mode for call and fix daa.
+ (gen_function_entry): New param to tell if src8/dst8 locals are
+ necessary.
+ (gen_interpreter): Use it to avoid generation of unused variables.
+ * interp.c (sim_fetch_register): Allow to read page register; page
+ register, A, B and CCR are only 1 byte wide.
+ (sim_store_register): Likewise for writing.
+
+2002-06-16 Andrew Cagney <ac131313@redhat.com>
+
+ * configure: Regenerated to track ../common/aclocal.m4 changes.
+
+2002-06-09 Andrew Cagney <cagney@redhat.com>
+
+ * Makefile.in (INCLUDE): Update path to callback.h.
+ * sim-main.h: Include "gdb/callback.h" and "gdb/remote-sim.h".
+
+2002-03-07 Stephane Carrez <Stephane.Carrez@worldnet.fr>
+
+ * m68hc11_sim.c (cpu_move8): Call sim_engine_abort in default case.
+ (cpu_move16): Likewise.
+ (sim_memory_error): Use sim_io_printf.
+ (cpu_option_handler): Fix compilation warning.
+ * interp.c (sim_hw_configure): Fix compilation warning;
+ remove m68hc12sio@2 device.
+ (sim_open): Likewise.
+ * dv-m68hc11tim.c (m68hc11tim_port_event): Fix clear of TFLG2
+ flags when reset.
+ (cycle_to_string): Improve convertion of cpu cycle number.
+ (m68hc11tim_info): Print info about PACNT.
+ (m68hc11tim_io_write_buffer): Fix clearing of TFLG2; handle
+ TCTL1 and TCTL2 registers.
+ * dv-m68hc11.c (m68hc11_info): Print 6811 current running mode.
+
+2002-03-07 Stephane Carrez <Stephane.Carrez@worldnet.fr>
+
+ * interp.c (sim_hw_configure): Save the HW cpu pointer in the
+ cpu struct.
+ (sim_hw_configure): Connect the capture input/output events.
+ * sim-main.h (_sim_cpu): New member hw_cpu.
+ (m68hc11cpu_set_oscillator): Declare.
+ (m68hc11cpu_clear_oscillator): Declare.
+ (m68hc11cpu_set_port): Declare.
+ * dv-m68hc11.c (m68hc11_options): New for oscillator commands.
+ (m68hc11cpu_ports): New input ports and output ports to reflect
+ the HC11 IOs.
+ (m68hc11_delete): Cleanup any running oscillator.
+ (attach_m68hc11_regs): Create the input oscillators.
+ (make_oscillator): New function.
+ (find_oscillator): New function.
+ (oscillator_handler): New function.
+ (reset_oscillators): New function.
+ (m68hc11cpu_port_event): Handle the new input ports.
+ (m68hc11cpu_set_oscillator): New function.
+ (m68hc11cpu_clear_oscillator): New function.
+ (get_frequency): New function.
+ (m68hc11_option_handler): New function.
+ (m68hc11cpu_set_port): New function.
+ (m68hc11cpu_io_write): Post the port output events.
+ * dv-m68hc11spi.c (set_bit_port): Use m68hc11cpu_set_port to set
+ the output port value.
+ * dv-m68hc11tim.c (m68hc11tim_port_event): Handle CAPTURE event
+ by latching the TCNT value in the register.
+
+2002-03-07 Stephane Carrez <Stephane.Carrez@worldnet.fr>
+
+ * sim-main.h (cpu_frame, cpu_frame_list): Remove.
+ (cpu_frame_reg, cpu_print_frame): Remove.
+ (cpu_m68hc11_push_uint8, cpu_m68hc11_pop_uint8): Cleanup.
+ (cpu_m68hc11_push_uint16, cpu_m68hc11_pop_uint16): Likewise.
+ (cpu_m68hc12_push_uint8, cpu_m68hc12_push_uint16): Likewise.
+ (cpu_m68hc12_pop_uint8, cpu_m68hc12_pop_uint16): Likewise.
+ * m68hc11_sim.c (cpu_find_frame): Remove.
+ (cpu_create_frame_list): Remove.
+ (cpu_remove_frame_list, cpu_create_frame, cpu_free_frame): Remove.
+ (cpu_frame_reg, cpu_print_frame, cpu_update_frame): Remove.
+ (cpu_call): Cleanup to remove #if HAVE_FRAME and calls to the above.
+ (cpu_update_frame): Likewise.
+ (cpu_return): Likewise.
+ (cpu_reset): Likewise.
+ (cpu_initialize): Likewise.
+ * interp.c (sim_do_command): Remove call to cpu_print_frame.
+
+2002-03-07 Stephane Carrez <Stephane.Carrez@worldnet.fr>
+
+ * interrupts.c (interrupts_reset): New function, setup interrupt
+ vector address according to cpu mode.
+ (interrupts_initialize): Move reset portion to the above.
+ (interrupt_names): New table to give a name to interrupts.
+ (idefs): Handle pulse accumulator interrupts.
+ (interrupts_info): Print the interrupt history.
+ (interrupt_option_handler): New function.
+ (interrupt_options): New table of options.
+ (interrupts_update_pending): Keep track of when interrupts are
+ raised and implement breakpoint-on-raise-interrupt.
+ (interrupts_process): Keep track of when interrupts are taken
+ and implement breakpoint-on-interrupt.
+ * interrupts.h (struct interrupt_history): Define.
+ (struct interrupt): Keep track of the interrupt history.
+ (interrupts_reset): Declare.
+ (interrupts_initialize): Update prototype.
+ * m68hc11_sim.c (cpu_reset): Reset interrupts.
+ (cpu_initialize): Cleanup.
+
+2001-07-28 Stephane Carrez <Stephane.Carrez@worldnet.fr>
+
+ * dv-m68hc11eepr.c (m68hc11eepr_info): Fix print of current write
+ address.
+ (m68hc11eepr_port_event): Fix detach/attach logic.
+
2001-07-22 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* Makefile.in (SIM_OBJS): Remove sim-resume.o
(cpu_get_indexed_operand_addr): Likewise.
(cpu_set_reg, cpu_set_dst_reg, cpu_get_src_reg, cpu_get_reg): Likewise.
(cpu_reset): Setup INIT register according to architecture.
-
+
* sim-main.h (M6811_Special): Add 68HC12 specific instructions.
(_sim_cpu): Keep track of the cpu being simulated.
(cpu_get_tmp3, cpu_get_tmp2, cpu_set_tmp3, cpu_set_tmp2): New.
(cpu_exg, cpu_dbcc, cpu_move8, cpu_move16): Likewise,
(cpu_fetch_relbranch16): Likewise.
(cpu_interp_m6811): Rename of cpu_interp.
- (cpu_interp_m6812): New function.
+ (cpu_interp_m6812): New function.
* interp.c (free_state): New function.
(dev_list_68hc12): New table.
(sim_board_reset): Reset depending on the cpu (HC11 or HC12).
of masked insn cycles.
(interrupts_initialize): Clear last number of masked insn cycles.
(interrupts_info): Report them.
- (interrupts_update_pending): Compute clear and set masks of
- interrupts and clear the interrupt bits before setting them
+ (interrupts_update_pending): Compute clear and set masks of
+ interrupts and clear the interrupt bits before setting them
(due to SCI interrupt sharing).
* interrupts.h (struct interrupts): New members last_mask_cycles
and xirq_last_mask_cycles.
2000-09-10 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* sim-main.h: Define cycle_to_string.
- * dv-m68hc11tim.c (cycle_to_string): New function to translate
+ * dv-m68hc11tim.c (cycle_to_string): New function to translate
the cpu cycle into some formatted time string.
(m68hc11tim_print_timer): Use it.
* dv-m68hc11sio.c (m68hc11sio_info): Use cycle_to_string.
(m68hc11spi_info): Clarify the status report
of the SPI when a byte is being sent.
(m68hc11spi_clock): Fix the spi send frame.
-
+
2000-08-11 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* sim-main.h (m68hc11_map_level): Define level of address mappings.
(m68hc11cpu_port_event): Move initialization of M6811_HPRIO from here.
* m68hc11_sim.c (cpu_reset): To here.
* dv-m68hc11eepr.c: Fix indentation and comments.
-
+
2000-06-17 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* dv-nvram.c: New file, rename from dv-pram.c.
* m68hc11_sim.h: Delete file.
* configure.in: Rename pram into nvram.
* interp.c (sim_open): Likewise in creation of device tree.
-
+
2000-05-31 Stephane Carrez <Stephane.Carrez@worldnet.fr>
* interp.c (sim_open): Create the SPI device.
* dv-pram.c (attach_pram_regs): Fix the 'save-modified' mode.
* m68hc11_sim.h (_sim_cpu): Allow configuration of cpu mode.
- * dv-m68hc11.c (attach_m68hc11_regs): Get the cpu MODA,MODB
+ * dv-m68hc11.c (attach_m68hc11_regs): Get the cpu MODA,MODB
configuration from the 'mode' device tree property.
(m68hc11cpu_port_event): Reset M6811_HPRIO to the cpu MODA, MODB
configuration.
(_sim_cpu): New member cpu_page0_reg table.
* interp.c (sim_create_inferior): Fill the cpu_page0_reg table with
addresses of soft registers in .page0.
- (sim_fetch_register, sim_store_register): Use cpu_page0_reg table
+ (sim_fetch_register, sim_store_register): Use cpu_page0_reg table
to get/set soft registers.
1999-12-31 Stephane Carrez <stcarrez@worldnet.fr>
before trying to set the carry for the result.
1999-05-24 John S. Kallal <kallal@voicenet.com>
-
+
* interp.c (sim_get_info): Don't crash if the command line is 0.
Define prototype for sim_get_info() and init_system().
(sim_info): Correct call to sim_get_info().
-
+
1999-05-16 Stephane Carrez <stcarrez@worldnet.fr>
* configure.in: Recognize m6811-*-*.
* m68hc11_sim.h, m68hc11_sim.c: New files, specific operations
for interpreter.
* interrupts.c, interrupts.h: New files, management of interrupts.
- * interp.c, sim-main.h,
+ * interp.c, sim-main.h,
* dv-m68hc11.c, dv-m68hc11eepr.c, dv-m68hc11sio.c,
dv-m68hc11tim.c, dv-pram.c: New files representing devices for
68HC11 (dv-pram.c is generic and could probably migrate to common).