# in question.
#
case "${target}" in
+ mips64vr*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1" ;;
mips*tx39*) SIM_SUBTARGET="-DSUBTARGET_R3900=1";;
mipsisa32*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
mipsisa64*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
sim_m16_machine="-M mips16"
sim_igen_filter="32,64,f"
sim_m16_filter="16"
+sim_mach_default="mips8000"
+
case "${target}" in
mips*tx39*) sim_gen=IGEN
sim_igen_filter="32,f"
;;
mips64vr43*-*-*) sim_gen=IGEN
sim_igen_machine="-M mipsIV"
+ sim_mach_default="mips8000"
;;
mips64vr5*-*-*) sim_gen=IGEN
sim_igen_machine="-M vr5000"
+ sim_mach_default="mips5000"
;;
mips64vr41*) sim_gen=M16
sim_igen_machine="-M vr4100"
sim_m16_machine="-M vr4100"
sim_igen_filter="32,64,f"
sim_m16_filter="16"
+ sim_mach_default="mips4100"
;;
+ mips64vr-*-* | mips64vrel-*-*)
+ sim_gen=MULTI
+ sim_multi_configs="\
+ vr4100:mipsIII,mips16,vr4100:32,64:mips4100,mips4111\
+ vr4120:mipsIII,mips16,vr4120:32,64:mips4120\
+ vr5000:mipsIV:32,64,f:mips4300,mips5000\
+ vr5400:mipsIV,vr5400:32,64,f:mips5400\
+ vr5500:mipsIV,vr5500:32,64,f:mips5500"
+ sim_multi_default=mips5000
+ ;;
mips64*-*-*) sim_igen_filter="32,64,f"
sim_gen=IGEN
;;
mipsisa32*-*-*) sim_gen=IGEN
sim_igen_machine="-M mips32"
sim_igen_filter="32,f"
+ sim_mach_default="mipsisa32"
;;
mipsisa64sb1*-*-*) sim_gen=IGEN
sim_igen_machine="-M mips64,sb1"
sim_igen_filter="32,64,f"
+ sim_mach_default="mips_sb1"
;;
mipsisa64*-*-*) sim_gen=IGEN
sim_igen_machine="-M mips64,mips3d"
sim_igen_filter="32,64,f"
+ sim_mach_default="mipsisa64"
;;
mips*lsi*) sim_gen=M16
sim_igen_machine="-M mipsIII,mips16"
sim_m16_machine="-M mips16,mipsIII"
sim_igen_filter="32,f"
sim_m16_filter="16"
+ sim_mach_default="mips4000"
;;
mips*-*-*) sim_gen=IGEN
sim_igen_filter="32,f"
;;
esac
+
+# The MULTI generator can combine several simulation engines into one.
+# executable. A configuration which uses the MULTI should set two
+# variables: ${sim_multi_configs} and ${sim_multi_default}.
+#
+# ${sim_multi_configs} is the list of engines to build. Each
+# space-separated entry has the form NAME:MACHINE:FILTER:BFDMACHS,
+# where:
+#
+# - NAME is a C-compatible prefix for the engine,
+# - MACHINE is a -M argument,
+# - FILTER is a -F argument, and
+# - BFDMACHS is a comma-separated list of bfd machines that the
+# simulator can run.
+#
+# Each entry will have a separate simulation engine whose prefix is
+# m32<NAME>. If the machine list includes "mips16", there will also
+# be a mips16 engine, prefix m16<NAME>. The mips16 engine will be
+# generated using the same machine list as the 32-bit version,
+# but the filter will be "16" instead of FILTER.
+#
+# The simulator compares the bfd mach against BFDMACHS to decide
+# which engine to use. Entries in BFDMACHS should be bfd_mach
+# values with "bfd_mach_" removed. ${sim_multi_default} says
+# which entry should be the default.
+if test ${sim_gen} = MULTI; then
+
+ # Simple sanity check.
+ if test -z "${sim_multi_configs}" || test -z "${sim_multi_default}"; then
+ { echo "configure: error: Error in configure.in: MULTI simulator not set up correctly" 1>&2; exit 1; }
+ fi
+
+ # Start in a known state.
+ rm -f multi-include.h multi-run.c
+ sim_multi_flags=
+ sim_multi_src=
+ sim_multi_obj=multi-run.o
+ sim_multi_igen_configs=
+ sim_seen_default=no
+
+ cat << __EOF__ > multi-run.c
+/* Main entry point for MULTI simulators.
+ Copyright (C) 2003 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ --
+
+ This file was generated by sim/mips/configure. */
+
+#include "sim-main.h"
+#include "multi-include.h"
+
+#define SD sd
+#define CPU cpu
+
+void
+sim_engine_run (SIM_DESC sd,
+ int next_cpu_nr,
+ int nr_cpus,
+ int signal) /* ignore */
+{
+ int mach;
+
+ if (STATE_ARCHITECTURE (sd) == NULL)
+ mach = bfd_mach_${sim_multi_default};
+ else
+ mach = STATE_ARCHITECTURE (SD)->mach;
+
+ switch (mach)
+ {
+__EOF__
+
+ for fc in ${sim_multi_configs}; do
+
+ # Split up the entry. ${c} contains the first three elements.
+ # Note: outer sqaure brackets are m4 quotes.
+ c=`echo ${fc} | sed 's/:[^:]*$//'`
+ bfdmachs=`echo ${fc} | sed 's/.*://'`
+ name=`echo ${c} | sed 's/:.*//'`
+ machine=`echo ${c} | sed 's/.*:\(.*\):.*/\1/'`
+ filter=`echo ${c} | sed 's/.*://'`
+
+ # Build the following lists:
+ #
+ # sim_multi_flags: all -M and -F flags used by the simulator
+ # sim_multi_src: all makefile-generated source files
+ # sim_multi_obj: the objects for ${sim_multi_src}
+ # sim_multi_igen_configs: igen configuration strings.
+ #
+ # Each entry in ${sim_multi_igen_configs} is a prefix (m32
+ # or m16) followed by the NAME, MACHINE and FILTER part of
+ # the ${sim_multi_configs} entry.
+ sim_multi_flags="${sim_multi_flags} -F ${filter} -M ${machine}"
+
+ # Check whether mips16 handling is needed.
+ case ${c} in
+ *:*mips16*:*)
+ # Run igen twice, once for normal mode and once for mips16.
+ ws="m32 m16"
+
+ # The top-level function for the mips16 simulator is
+ # in a file m16${name}_run.c, generated by the
+ # tmp-run-multi Makefile rule.
+ sim_multi_src="${sim_multi_src} m16${name}_run.c"
+ sim_multi_obj="${sim_multi_obj} m16${name}_run.o"
+ sim_multi_flags="${sim_multi_flags} -F 16"
+ ;;
+ *)
+ ws=m32
+ ;;
+ esac
+
+ # Now add the list of igen-generated files to ${sim_multi_src}
+ # and ${sim_multi_obj}.
+ for w in ${ws}; do
+ for base in engine icache idecode model semantics support; do
+ sim_multi_src="${sim_multi_src} ${w}${name}_${base}.c"
+ sim_multi_src="${sim_multi_src} ${w}${name}_${base}.h"
+ sim_multi_obj="${sim_multi_obj} ${w}${name}_${base}.o"
+ done
+ sim_multi_igen_configs="${sim_multi_igen_configs} ${w}${c}"
+ done
+
+ # Add an include for the engine.h file. This file declares the
+ # top-level foo_engine_run() function.
+ echo "#include \"${w}${name}_engine.h\"" >> multi-include.h
+
+ # Add case statements for this engine to sim_engine_run().
+ for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do
+ echo " case bfd_mach_${mach}:" >> multi-run.c
+ if test ${mach} = ${sim_multi_default}; then
+ echo " default:" >> multi-run.c
+ sim_seen_default=yes
+ fi
+ done
+ echo " ${w}${name}_engine_run (sd, next_cpu_nr, nr_cpus, signal);" \
+ >> multi-run.c
+ echo " break;" >> multi-run.c
+ done
+
+ # Check whether we added a 'default:' label.
+ if test ${sim_seen_default} = no; then
+ { echo "configure: error: Error in configure.in: \${sim_multi_configs} doesn't have an entry for \${sim_multi_default}" 1>&2; exit 1; }
+ fi
+
+ cat << __EOF__ >> multi-run.c
+ }
+}
+
+int
+mips_mach_multi (SIM_DESC sd)
+{
+ if (STATE_ARCHITECTURE (sd) == NULL)
+ return bfd_mach_${sim_multi_default};
+
+ switch (STATE_ARCHITECTURE (SD)->mach)
+ {
+__EOF__
+
+ # Add case statements for this engine to mips_mach_multi().
+ for fc in ${sim_multi_configs}; do
+
+ # Split up the entry. ${c} contains the first three elements.
+ # Note: outer sqaure brackets are m4 quotes.
+ c=`echo ${fc} | sed 's/:[^:]*$//'`
+ bfdmachs=`echo ${fc} | sed 's/.*://'`
+
+ for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do
+ echo " case bfd_mach_${mach}:" >> multi-run.c
+ done
+ done
+
+ cat << __EOF__ >> multi-run.c
+ return (STATE_ARCHITECTURE (SD)->mach);
+ default:
+ return bfd_mach_${sim_multi_default};
+ }
+}
+__EOF__
+
+ SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_MULTI"
+else
+ # For clean-extra
+ sim_multi_src=doesnt-exist.c
+
+ if test x"${sim_mach_default}" = x""; then
+ { echo "configure: error: Error in configure.in: \${sim_mach_default} not defined" 1>&2; exit 1; }
+ fi
+ SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_DEFAULT=bfd_mach_${sim_mach_default}"
+fi
sim_igen_flags="-F ${sim_igen_filter} ${sim_igen_machine} ${sim_igen_smp}"
sim_m16_flags=" -F ${sim_m16_filter} ${sim_m16_machine} ${sim_igen_smp}"
+
+
+
+
#
# Add simulated hardware devices
#
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:4208: checking for X" >&5
+echo "configure:4435: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 4270 "configure"
+#line 4497 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4275: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4502: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4344 "configure"
+#line 4571 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:4351: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:4444: checking for $ac_hdr" >&5
+echo "configure:4671: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4449 "configure"
+#line 4676 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4454: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4681: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6
-echo "configure:4481: checking for fabs in -lm" >&5
+echo "configure:4708: checking for fabs in -lm" >&5
ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4489 "configure"
+#line 4716 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
fabs()
; return 0; }
EOF
-if { (eval echo configure:4500: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4727: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in aint anint sqrt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:4530: checking for $ac_func" >&5
+echo "configure:4757: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 4535 "configure"
+#line 4762 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:4558: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
s%@sim_igen_flags@%$sim_igen_flags%g
s%@sim_m16_flags@%$sim_m16_flags%g
s%@sim_gen@%$sim_gen%g
+s%@sim_multi_flags@%$sim_multi_flags%g
+s%@sim_multi_igen_configs@%$sim_multi_igen_configs%g
+s%@sim_multi_src@%$sim_multi_src%g
+s%@sim_multi_obj@%$sim_multi_obj%g
s%@mips_extra_objs@%$mips_extra_objs%g
s%@mips_igen_engine@%$mips_igen_engine%g
s%@mips_extra_libs@%$mips_extra_libs%g
projects / deliverable / binutils-gdb.git / blobdiff