+
# This file is derived from `gettext.m4'. The difference is that the
-# Check to see if we're running under Cygwin32, without using
-# AC_CANONICAL_*. If so, set output variable CYGWIN32 to "yes".
-# Otherwise set it to "no".
-
-
-
-# Check to see if we're running under Win32, without using
-# AC_CANONICAL_*. If so, set output variable EXEEXT to ".exe".
-# Otherwise set it to "".
-
# Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12.2
+# Generated automatically using autoconf version 2.13
# Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
#
# This configure script is free software; the Free Software Foundation
ac_help="$ac_help
--enable-sim-hostendian=end Specify host byte endian orientation."
ac_help="$ac_help
- --enable-build-warnings[=LIST] Enable build-time compiler warnings"
+ --enable-build-warnings Enable build-time compiler warnings if gcc is used"
+ac_help="$ac_help
+ --enable-gdb-build-warnings Enable SIM specific build-time compiler warnings if gcc is used"
+ac_help="$ac_help
+ --enable-sim-reserved-bits Specify whether to check reserved bits in instruction."
ac_help="$ac_help
--enable-sim-endian=endian Specify target byte endian orientation."
ac_help="$ac_help
--enable-sim-hardware=LIST Specify the hardware to be included in the build."
ac_help="$ac_help
--with-x use the X Window System"
-ac_help="$ac_help
- --with-sim-gpu2=path Use GPU2 library under given directory"
-ac_help="$ac_help
- --with-x use the X Window System"
-ac_help="$ac_help
- --with-sim-funit=path Use target FP library under given directory"
# Initialize some variables set by options.
# The variables have the same names as the options, with
program_transform_name=s,x,x,
silent=
site=
+sitefile=
srcdir=
target=NONE
verbose=
--help print this message
--no-create do not create output files
--quiet, --silent do not print \`checking...' messages
+ --site-file=FILE use FILE as the site file
--version print the version of autoconf that created configure
Directory and file names:
--prefix=PREFIX install architecture-independent files in PREFIX
-site=* | --site=* | --sit=*)
site="$ac_optarg" ;;
+ -site-file | --site-file | --site-fil | --site-fi | --site-f)
+ ac_prev=sitefile ;;
+ -site-file=* | --site-file=* | --site-fil=* | --site-fi=* | --site-f=*)
+ sitefile="$ac_optarg" ;;
+
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
verbose=yes ;;
-version | --version | --versio | --versi | --vers)
- echo "configure generated by autoconf version 2.12.2"
+ echo "configure generated by autoconf version 2.13"
exit 0 ;;
-with-* | --with-*)
srcdir=`echo "${srcdir}" | sed 's%\([^/]\)/*$%\1%'`
# Prefer explicitly selected file to automatically selected ones.
-if test -z "$CONFIG_SITE"; then
- if test "x$prefix" != xNONE; then
- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
- else
- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+if test -z "$sitefile"; then
+ if test -z "$CONFIG_SITE"; then
+ if test "x$prefix" != xNONE; then
+ CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site"
+ else
+ CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site"
+ fi
fi
+else
+ CONFIG_SITE="$sitefile"
fi
for ac_site_file in $CONFIG_SITE; do
if test -r "$ac_site_file"; then
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_off_t=yes
else
#endif
EOF
if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
+ egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then
rm -rf conftest*
ac_cv_type_size_t=yes
else
fi
+echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6
+echo "configure:1616: checking for Cygwin environment" >&5
+if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1621 "configure"
+#include "confdefs.h"
+
+int main() {
+
+#ifndef __CYGWIN__
+#define __CYGWIN__ __CYGWIN32__
+#endif
+return __CYGWIN__;
+; return 0; }
+EOF
+if { (eval echo configure:1632: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_cygwin=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_cygwin=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_cygwin" 1>&6
+CYGWIN=
+test "$ac_cv_cygwin" = yes && CYGWIN=yes
+echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6
+echo "configure:1649: checking for mingw32 environment" >&5
+if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then
+ echo $ac_n "(cached) $ac_c" 1>&6
+else
+ cat > conftest.$ac_ext <<EOF
+#line 1654 "configure"
+#include "confdefs.h"
+
+int main() {
+return __MINGW32__;
+; return 0; }
+EOF
+if { (eval echo configure:1661: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ ac_cv_mingw32=yes
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+ rm -rf conftest*
+ ac_cv_mingw32=no
+fi
+rm -f conftest*
+rm -f conftest*
+fi
+
+echo "$ac_t""$ac_cv_mingw32" 1>&6
+MINGW32=
+test "$ac_cv_mingw32" = yes && MINGW32=yes
# autoconf.info says this should be called right after AC_INIT.
fi
echo $ac_n "checking host system type""... $ac_c" 1>&6
-echo "configure:1666: checking host system type" >&5
+echo "configure:1728: checking host system type" >&5
host_alias=$host
case "$host_alias" in
echo "$ac_t""$host" 1>&6
echo $ac_n "checking target system type""... $ac_c" 1>&6
-echo "configure:1687: checking target system type" >&5
+echo "configure:1749: checking target system type" >&5
target_alias=$target
case "$target_alias" in
echo "$ac_t""$target" 1>&6
echo $ac_n "checking build system type""... $ac_c" 1>&6
-echo "configure:1705: checking build system type" >&5
+echo "configure:1767: checking build system type" >&5
build_alias=$build
case "$build_alias" in
# Extract the first word of "gcc", so it can be a program name with args.
set dummy gcc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1749: checking for $ac_word" >&5
+echo "configure:1811: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="gcc"
# Extract the first word of "cc", so it can be a program name with args.
set dummy cc; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1778: checking for $ac_word" >&5
+echo "configure:1841: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
ac_prog_rejected=no
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then
# Extract the first word of "cl", so it can be a program name with args.
set dummy cl; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1828: checking for $ac_word" >&5
+echo "configure:1892: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_prog_CC="$CC" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_CC="cl"
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6
-echo "configure:1859: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
+echo "configure:1924: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5
ac_ext=c
# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
cross_compiling=$ac_cv_prog_cc_cross
-cat > conftest.$ac_ext <<EOF
-#line 1869 "configure"
+cat > conftest.$ac_ext << EOF
+
+#line 1935 "configure"
#include "confdefs.h"
+
main(){return(0);}
EOF
-if { (eval echo configure:1873: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:1940: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
ac_cv_prog_cc_works=yes
# If we can't run a trivial program, we are probably using a cross compiler.
if (./conftest; exit) 2>/dev/null; then
ac_cv_prog_cc_works=no
fi
rm -fr conftest*
+ac_ext=c
+# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options.
+ac_cpp='$CPP $CPPFLAGS'
+ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5'
+ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5'
+cross_compiling=$ac_cv_prog_cc_cross
echo "$ac_t""$ac_cv_prog_cc_works" 1>&6
if test $ac_cv_prog_cc_works = no; then
{ echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; }
fi
echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6
-echo "configure:1893: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
+echo "configure:1966: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5
echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6
cross_compiling=$ac_cv_prog_cc_cross
echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6
-echo "configure:1898: checking whether we are using GNU C" >&5
+echo "configure:1971: checking whether we are using GNU C" >&5
if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
yes;
#endif
EOF
-if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1907: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
+if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1980: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then
ac_cv_prog_gcc=yes
else
ac_cv_prog_gcc=no
ac_save_CFLAGS="$CFLAGS"
CFLAGS=
echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6
-echo "configure:1926: checking whether ${CC-cc} accepts -g" >&5
+echo "configure:1999: checking whether ${CC-cc} accepts -g" >&5
if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
# ./install, which can be erroneously created by make from ./install.sh.
echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1969: checking for a BSD compatible install" >&5
+echo "configure:2042: checking for a BSD compatible install" >&5
if test -z "$INSTALL"; then
if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
# It thinks the first close brace ends the variable substitution.
test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}'
+test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}'
+
test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
# Extract the first word of "ranlib", so it can be a program name with args.
set dummy ranlib; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2035: checking for $ac_word" >&5
+echo "configure:2110: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test.
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_prog_RANLIB="ranlib"
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2069: checking for $ac_hdr" >&5
+echo "configure:2145: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2074 "configure"
+#line 2150 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2079: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2155: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
__argz_count __argz_stringify __argz_next
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2109: checking for $ac_func" >&5
+echo "configure:2185: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2114 "configure"
+#line 2190 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2137: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2213: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
for ac_func in stpcpy
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2166: checking for $ac_func" >&5
+echo "configure:2242: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2171 "configure"
+#line 2247 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2194: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2270: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
if test $ac_cv_header_locale_h = yes; then
echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6
-echo "configure:2228: checking for LC_MESSAGES" >&5
+echo "configure:2304: checking for LC_MESSAGES" >&5
if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2233 "configure"
+#line 2309 "configure"
#include "confdefs.h"
#include <locale.h>
int main() {
return LC_MESSAGES
; return 0; }
EOF
-if { (eval echo configure:2240: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2316: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
am_cv_val_LC_MESSAGES=yes
else
fi
fi
echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6
-echo "configure:2261: checking whether NLS is requested" >&5
+echo "configure:2337: checking whether NLS is requested" >&5
# Check whether --enable-nls or --disable-nls was given.
if test "${enable_nls+set}" = set; then
enableval="$enable_nls"
EOF
echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6
-echo "configure:2281: checking whether included gettext is requested" >&5
+echo "configure:2357: checking whether included gettext is requested" >&5
# Check whether --with-included-gettext or --without-included-gettext was given.
if test "${with_included_gettext+set}" = set; then
withval="$with_included_gettext"
ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for libintl.h""... $ac_c" 1>&6
-echo "configure:2300: checking for libintl.h" >&5
+echo "configure:2376: checking for libintl.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2305 "configure"
+#line 2381 "configure"
#include "confdefs.h"
#include <libintl.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2310: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2386: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6
-echo "configure:2327: checking for gettext in libc" >&5
+echo "configure:2403: checking for gettext in libc" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2332 "configure"
+#line 2408 "configure"
#include "confdefs.h"
#include <libintl.h>
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:2339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2415: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libc=yes
else
if test "$gt_cv_func_gettext_libc" != "yes"; then
echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6
-echo "configure:2355: checking for bindtextdomain in -lintl" >&5
+echo "configure:2431: checking for bindtextdomain in -lintl" >&5
ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lintl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 2363 "configure"
+#line 2439 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bindtextdomain()
; return 0; }
EOF
-if { (eval echo configure:2374: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2450: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
echo "$ac_t""yes" 1>&6
echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6
-echo "configure:2390: checking for gettext in libintl" >&5
+echo "configure:2466: checking for gettext in libintl" >&5
if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2395 "configure"
+#line 2471 "configure"
#include "confdefs.h"
int main() {
return (int) gettext ("")
; return 0; }
EOF
-if { (eval echo configure:2402: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2478: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
gt_cv_func_gettext_libintl=yes
else
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2430: checking for $ac_word" >&5
+echo "configure:2506: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
for ac_func in dcgettext
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2464: checking for $ac_func" >&5
+echo "configure:2540: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2469 "configure"
+#line 2545 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:2492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2568: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2519: checking for $ac_word" >&5
+echo "configure:2595: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2554: checking for $ac_word" >&5
+echo "configure:2631: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
fi
cat > conftest.$ac_ext <<EOF
-#line 2586 "configure"
+#line 2663 "configure"
#include "confdefs.h"
int main() {
return _nl_msg_cat_cntr
; return 0; }
EOF
-if { (eval echo configure:2594: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:2671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
CATOBJEXT=.gmo
DATADIRNAME=share
# Extract the first word of "msgfmt", so it can be a program name with args.
set dummy msgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2626: checking for $ac_word" >&5
+echo "configure:2703: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
# Extract the first word of "gmsgfmt", so it can be a program name with args.
set dummy gmsgfmt; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2660: checking for $ac_word" >&5
+echo "configure:2737: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
;;
*)
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
- for ac_dir in $PATH; do
+ ac_dummy="$PATH"
+ for ac_dir in $ac_dummy; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/$ac_word; then
ac_cv_path_GMSGFMT="$ac_dir/$ac_word"
# Extract the first word of "xgettext", so it can be a program name with args.
set dummy xgettext; ac_word=$2
echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:2695: checking for $ac_word" >&5
+echo "configure:2773: checking for $ac_word" >&5
if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
LINGUAS=
else
echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6
-echo "configure:2785: checking for catalogs to be installed" >&5
+echo "configure:2863: checking for catalogs to be installed" >&5
NEW_LINGUAS=
for lang in ${LINGUAS=$ALL_LINGUAS}; do
case "$ALL_LINGUAS" in
if test "$CATOBJEXT" = ".cat"; then
ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6
-echo "configure:2813: checking for linux/version.h" >&5
+echo "configure:2891: checking for linux/version.h" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2818 "configure"
+#line 2896 "configure"
#include "confdefs.h"
#include <linux/version.h>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2823: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2901: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2892: checking for $ac_hdr" >&5
+echo "configure:2970: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2897 "configure"
+#line 2975 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2902: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2980: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2932: checking for $ac_hdr" >&5
+echo "configure:3010: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2937 "configure"
+#line 3015 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2942: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3020: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2972: checking for $ac_hdr" >&5
+echo "configure:3050: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 2977 "configure"
+#line 3055 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2982: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3060: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
do
ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:3012: checking for $ac_hdr" >&5
+echo "configure:3090: checking for $ac_hdr" >&5
if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3017 "configure"
+#line 3095 "configure"
#include "confdefs.h"
#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:3022: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:3100: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
for ac_func in getrusage time sigaction __setfpucw
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:3051: checking for $ac_func" >&5
+echo "configure:3129: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3056 "configure"
+#line 3134 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:3079: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3157: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
# Check for socket libraries
echo $ac_n "checking for bind in -lsocket""... $ac_c" 1>&6
-echo "configure:3106: checking for bind in -lsocket" >&5
+echo "configure:3184: checking for bind in -lsocket" >&5
ac_lib_var=`echo socket'_'bind | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lsocket $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3114 "configure"
+#line 3192 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
bind()
; return 0; }
EOF
-if { (eval echo configure:3125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3203: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
fi
echo $ac_n "checking for gethostbyname in -lnsl""... $ac_c" 1>&6
-echo "configure:3153: checking for gethostbyname in -lnsl" >&5
+echo "configure:3231: checking for gethostbyname in -lnsl" >&5
ac_lib_var=`echo nsl'_'gethostbyname | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lnsl $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 3161 "configure"
+#line 3239 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
gethostbyname()
; return 0; }
EOF
-if { (eval echo configure:3172: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:3250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
echo "Setting sim profile = $sim_profile" 6>&1
fi
else
- sim_profile=""
+ sim_profile="-DPROFILE=1 -DWITH_PROFILE=-1"
fi
echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:3348: checking return type of signal handlers" >&5
+echo "configure:3426: checking return type of signal handlers" >&5
if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 3353 "configure"
+#line 3431 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <signal.h>
int i;
; return 0; }
EOF
-if { (eval echo configure:3370: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3448: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_type_signal=void
else
+
+
echo $ac_n "checking for executable suffix""... $ac_c" 1>&6
-echo "configure:3390: checking for executable suffix" >&5
-if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then
+echo "configure:3470: checking for executable suffix" >&5
+if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- if test "$CYGWIN32" = yes; then
-am_cv_exeext=.exe
-else
-cat > am_c_test.c << 'EOF'
-int main() {
-/* Nothing needed here */
-}
-EOF
-${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5
-am_cv_exeext=`ls am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//`
-rm -f am_c_test*
+ if test "$CYGWIN" = yes || test "$MINGW32" = yes; then
+ ac_cv_exeext=.exe
+else
+ rm -f conftest*
+ echo 'int main () { return 0; }' > conftest.$ac_ext
+ ac_cv_exeext=
+ if { (eval echo configure:3480: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then
+ for file in conftest.*; do
+ case $file in
+ *.c | *.o | *.obj | *.ilk | *.pdb) ;;
+ *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;;
+ esac
+ done
+ else
+ { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; }
+ fi
+ rm -f conftest*
+ test x"${ac_cv_exeext}" = x && ac_cv_exeext=no
fi
-
-test x"${am_cv_exeext}" = x && am_cv_exeext=no
fi
+
EXEEXT=""
-test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext}
-echo "$ac_t""${am_cv_exeext}" 1>&6
+test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext}
+echo "$ac_t""${ac_cv_exeext}" 1>&6
+ac_exeext=$EXEEXT
sim_link_files=
if test "x$cross_compiling" = "xno"; then
echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:3543: checking whether byte ordering is bigendian" >&5
+echo "configure:3630: checking whether byte ordering is bigendian" >&5
if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
ac_cv_c_bigendian=unknown
# See if sys/param.h defines the BYTE_ORDER macro.
cat > conftest.$ac_ext <<EOF
-#line 3550 "configure"
+#line 3637 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3561: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3648: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
# It does; now see whether it defined to BIG_ENDIAN or not.
cat > conftest.$ac_ext <<EOF
-#line 3565 "configure"
+#line 3652 "configure"
#include "confdefs.h"
#include <sys/types.h>
#include <sys/param.h>
#endif
; return 0; }
EOF
-if { (eval echo configure:3576: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:3663: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
rm -rf conftest*
ac_cv_c_bigendian=yes
else
{ echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
else
cat > conftest.$ac_ext <<EOF
-#line 3596 "configure"
+#line 3683 "configure"
#include "confdefs.h"
main () {
/* Are we little or big endian? From Harbison&Steele. */
exit (u.c[sizeof (long) - 1] == 1);
}
EOF
-if { (eval echo configure:3609: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:3696: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null
then
ac_cv_c_bigendian=no
else
fi
+# NOTE: Don't add -Wall or -Wunused, they both include
+# -Wunused-parameter which reports bogus warnings.
+# NOTE: If you add to this list, remember to update
+# gdb/doc/gdbint.texinfo.
+build_warnings="-Wimplicit -Wreturn-type -Wcomment -Wtrigraphs \
+-Wformat -Wparentheses -Wpointer-arith -Wuninitialized"
+# Up for debate: -Wswitch -Wcomment -trigraphs -Wtrigraphs
+# -Wunused-function -Wunused-label -Wunused-variable -Wunused-value
+# -Wchar-subscripts -Wtraditional -Wshadow -Wcast-qual
+# -Wcast-align -Wwrite-strings -Wconversion -Wstrict-prototypes
+# -Wmissing-prototypes -Wmissing-declarations -Wredundant-decls
+# -Woverloaded-virtual -Winline -Werror"
# Check whether --enable-build-warnings or --disable-build-warnings was given.
if test "${enable_build_warnings+set}" = set; then
enableval="$enable_build_warnings"
- build_warnings="-Wall -Wpointer-arith -Wstrict-prototypes -Wmissing-prototypes -Wmissing-declarations"
-case "${enableval}" in
+ case "${enableval}" in
+ yes) ;;
+ no) build_warnings="-w";;
+ ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${build_warnings} ${t}";;
+ *,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+esac
+if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
+ echo "Setting compiler warning flags = $build_warnings" 6>&1
+fi
+fi
+# Check whether --enable-sim-build-warnings or --disable-sim-build-warnings was given.
+if test "${enable_sim_build_warnings+set}" = set; then
+ enableval="$enable_sim_build_warnings"
+ case "${enableval}" in
yes) ;;
no) build_warnings="-w";;
,*) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${build_warnings} ${t}";;
+ build_warnings="${build_warnings} ${t}";;
*,) t=`echo "${enableval}" | sed -e "s/,/ /g"`
- build_warnings="${t} ${build_warnings}";;
- *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
+ build_warnings="${t} ${build_warnings}";;
+ *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;;
esac
if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then
- echo "Setting warning flags = $build_warnings" 6>&1
+ echo "Setting GDB specific compiler warning flags = $build_warnings" 6>&1
+fi
+fi
+WARN_CFLAGS=""
+WERROR_CFLAGS=""
+if test "x${build_warnings}" != x -a "x$GCC" = xyes
+then
+ echo $ac_n "checking compiler warning flags""... $ac_c" 1>&6
+echo "configure:3779: checking compiler warning flags" >&5
+ # Separate out the -Werror flag as some files just cannot be
+ # compiled with it enabled.
+ for w in ${build_warnings}; do
+ case $w in
+ -Werr*) WERROR_CFLAGS=-Werror ;;
+ *) # Check that GCC accepts it
+ saved_CFLAGS="$CFLAGS"
+ CFLAGS="$CFLAGS $w"
+ cat > conftest.$ac_ext <<EOF
+#line 3789 "configure"
+#include "confdefs.h"
+
+int main() {
+
+; return 0; }
+EOF
+if { (eval echo configure:3796: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+ rm -rf conftest*
+ WARN_CFLAGS="${WARN_CFLAGS} $w"
+else
+ echo "configure: failed program was:" >&5
+ cat conftest.$ac_ext >&5
+fi
+rm -f conftest*
+ CFLAGS="$saved_CFLAGS"
+ esac
+ done
+ echo "$ac_t""${WARN_CFLAGS}${WERROR_CFLAGS}" 1>&6
+fi
+
+
+default_sim_reserved_bits="1"
+# Check whether --enable-sim-reserved-bits or --disable-sim-reserved-bits was given.
+if test "${enable_sim_reserved_bits+set}" = set; then
+ enableval="$enable_sim_reserved_bits"
+ case "${enableval}" in
+ yes) sim_reserved_bits="-DWITH_RESERVED_BITS=1";;
+ no) sim_reserved_bits="-DWITH_RESERVED_BITS=0";;
+ *) { echo "configure: error: "--enable-sim-reserved-bits does not take a value"" 1>&2; exit 1; }; sim_reserved_bits="";;
+esac
+if test x"$silent" != x"yes" && test x"$sim_reserved_bits" != x""; then
+ echo "Setting reserved flags = $sim_reserved_bits" 6>&1
fi
else
- build_warnings=""
+ sim_reserved_bits="-DWITH_RESERVED_BITS=${default_sim_reserved_bits}"
fi
# in question.
#
case "${target}" in
-# start-sanitize-vr4xxx
- mips64vr4xxx*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1" ;;
-# end-sanitize-vr4xxx
-# start-sanitize-tx19
- mips*tx19*) SIM_SUBTARGET="-DSUBTARGET_R3900=1";;
-# end-sanitize-tx19
- mips64vr5xxx*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1" ;;
+ mips64vr*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1" ;;
mips*tx39*) SIM_SUBTARGET="-DSUBTARGET_R3900=1";;
+ mipsisa32*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
+ mipsisa64*-*-*) SIM_SUBTARGET="-DTARGET_ENABLE_FR=1";;
*) SIM_SUBTARGET="";;
esac
mips_endian=
default_endian=
case "${target}" in
-# start-sanitize-tx19
- mips*tx19*) default_endian=BIG_ENDIAN ;;
-# end-sanitize-tx19
-# start-sanitize-r5900
- mips64r59*-*-*) mips_endian=LITTLE_ENDIAN ;;
-# end-sanitize-r5900
mips64el*-*-*) mips_endian=LITTLE_ENDIAN ;;
+ mips64vr*el-*-*) default_endian=LITTLE_ENDIAN ;;
mips64*-*-*) default_endian=BIG_ENDIAN ;;
mips16*-*-*) default_endian=BIG_ENDIAN ;;
+ mipsisa32*-*-*) default_endian=BIG_ENDIAN ;;
+ mipsisa64*-*-*) default_endian=BIG_ENDIAN ;;
mips*-*-*) default_endian=BIG_ENDIAN ;;
*) default_endian=BIG_ENDIAN ;;
esac
#
mips_addr_bitsize=
case "${target}" in
-# start-sanitize-tx19
- mips*tx19*) mips_bitsize=32 ; mips_msb=31 ;;
-# end-sanitize-tx19
-# start-sanitize-r5900
- mips64r59*-*-*) mips_bitsize=64 ; mips_msb=63 ; mips_addr_bitsize=32;;
-# end-sanitize-r5900
-# start-sanitize-sky
- mips64*-sky*-*) mips_bitsize=64 ; mips_msb=63 ; mips_addr_bitsize=32;;
-# end-sanitize-sky
mips64*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
mips16*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
+ mipsisa32*-*-*) mips_bitsize=32 ; mips_msb=31 ;;
+ mipsisa64*-*-*) mips_bitsize=64 ; mips_msb=63 ;;
mips*-*-*) mips_bitsize=32 ; mips_msb=31 ;;
*) mips_bitsize=64 ; mips_msb=63 ;;
esac
mips_fpu=HARDWARE_FLOATING_POINT
mips_fpu_bitsize=
case "${target}" in
-# start-sanitize-tx19
- mips*tx19*) mips_fpu=SOFT_FLOATING_POINT ;;
-# end-sanitize-tx19
mips*tx39*) mips_fpu=HARD_FLOATING_POINT
mips_fpu_bitsize=32
;;
-# start-sanitize-vr4xxx
- mips64vr4xxx*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;
-# end-sanitize-vr4xxx
-# start-sanitize-r5900
- mips64r59*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
-# end-sanitize-r5900
-# start-sanitize-sky
- mips64*-sky*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
-# end-sanitize-sky
mips64*-*-*) mips_fpu=HARD_FLOATING_POINT ;;
mips16*-*-*) mips_fpu=HARD_FLOATING_POINT ;;
+ mipsisa32*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;
+ mipsisa64*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=64 ;;
mips*-*-*) mips_fpu=HARD_FLOATING_POINT ; mips_fpu_bitsize=32 ;;
*) mips_fpu=HARD_FLOATING_POINT ;;
esac
# Select the level of SMP support
#
case "${target}" in
-# start-sanitize-r5900
- mips64r59*-*-*) mips_smp=1 ;;
-# end-sanitize-r5900
*) mips_smp=0 ;;
esac
#
sim_gen=IGEN
sim_igen_machine="-M mipsIV"
-sim_m16_machine="-M mips16"
+sim_m16_machine="-M mips16,mipsIII"
sim_igen_filter="32,64,f"
sim_m16_filter="16"
+sim_mach_default="mips8000"
+
case "${target}" in
-# start-sanitize-tx19
- mips*tx19*) sim_gen=M16
- sim_igen_machine="-M tx19"
- sim_m16_machine="-M tx19"
- sim_igen_filter="32"
- sim_m16_filter="16"
- ;;
-# end-sanitize-tx19
mips*tx39*) sim_gen=IGEN
sim_igen_filter="32,f"
sim_igen_machine="-M r3900"
;;
-# start-sanitize-r5900
- mips64r59*-*-*) sim_gen=IGEN
- sim_igen_machine="-M r5900"
- ;;
-# end-sanitize-r5900
-# start-sanitize-vr4320
- mips64vr4320-*-*) sim_gen=IGEN
- sim_igen_machine="-M mipsIV,vr4320 -G gen-multi-sim=vr4320"
- ;;
-# end-sanitize-vr4320
mips64vr43*-*-*) sim_gen=IGEN
sim_igen_machine="-M mipsIV"
-# start-sanitize-vr4320
- sim_igen_machine="-M mipsIV,vr4320 -G gen-multi-sim=mipsIV"
-# end-sanitize-vr4320
- ;;
-# start-sanitize-cygnus
- mips64vr54*-*-*) sim_gen=IGEN
- sim_igen_machine="-M vr5000,vr5400 -G gen-multi-sim=vr5400"
+ sim_mach_default="mips8000"
;;
-# end-sanitize-cygnus
mips64vr5*-*-*) sim_gen=IGEN
sim_igen_machine="-M vr5000"
-# start-sanitize-cygnus
- sim_igen_machine="-M vr5000,vr5400 -G gen-multi-sim=vr5000"
+ sim_mach_default="mips5000"
;;
-# end-sanitize-cygnus
-# start-sanitize-vr4xxx
- mips64vr4xxx*-*-*) sim_gen=IGEN
- sim_igen_machine="-M mipsIV,vr4100,vr4121 -G gen-multi-sim=mipsIV"
- ;;
-# end-sanitize-vr4xxx
mips64vr41*) sim_gen=M16
sim_igen_machine="-M vr4100"
sim_m16_machine="-M vr4100"
sim_igen_filter="32,64,f"
sim_m16_filter="16"
+ sim_mach_default="mips4100"
;;
+ mips64vr-*-* | mips64vrel-*-*)
+ sim_gen=MULTI
+ sim_multi_configs="\
+ vr4100:mipsIII,mips16,vr4100:32,64:mips4100,mips4111\
+ vr4120:mipsIII,mips16,vr4120:32,64:mips4120\
+ vr5000:mipsIV:32,64,f:mips4300,mips5000\
+ vr5400:mipsIV,vr5400:32,64,f:mips5400\
+ vr5500:mipsIV,vr5500:32,64,f:mips5500"
+ sim_multi_default=mips5000
+ ;;
mips64*-*-*) sim_igen_filter="32,64,f"
sim_gen=IGEN
;;
sim_igen_filter="32,64,f"
sim_m16_filter="16"
;;
+ mipsisa32*-*-*) sim_gen=IGEN
+ sim_igen_machine="-M mips32"
+ sim_igen_filter="32,f"
+ sim_mach_default="mipsisa32"
+ ;;
+ mipsisa64sb1*-*-*) sim_gen=IGEN
+ sim_igen_machine="-M mips64,mips3d,sb1"
+ sim_igen_filter="32,64,f"
+ sim_mach_default="mips_sb1"
+ ;;
+ mipsisa64*-*-*) sim_gen=IGEN
+ sim_igen_machine="-M mips64,mips3d"
+ sim_igen_filter="32,64,f"
+ sim_mach_default="mipsisa64"
+ ;;
mips*lsi*) sim_gen=M16
sim_igen_machine="-M mipsIII,mips16"
sim_m16_machine="-M mips16,mipsIII"
sim_igen_filter="32,f"
sim_m16_filter="16"
+ sim_mach_default="mips4000"
;;
mips*-*-*) sim_gen=IGEN
sim_igen_filter="32,f"
;;
esac
+
+# The MULTI generator can combine several simulation engines into one.
+# executable. A configuration which uses the MULTI should set two
+# variables: ${sim_multi_configs} and ${sim_multi_default}.
+#
+# ${sim_multi_configs} is the list of engines to build. Each
+# space-separated entry has the form NAME:MACHINE:FILTER:BFDMACHS,
+# where:
+#
+# - NAME is a C-compatible prefix for the engine,
+# - MACHINE is a -M argument,
+# - FILTER is a -F argument, and
+# - BFDMACHS is a comma-separated list of bfd machines that the
+# simulator can run.
+#
+# Each entry will have a separate simulation engine whose prefix is
+# m32<NAME>. If the machine list includes "mips16", there will also
+# be a mips16 engine, prefix m16<NAME>. The mips16 engine will be
+# generated using the same machine list as the 32-bit version,
+# but the filter will be "16" instead of FILTER.
+#
+# The simulator compares the bfd mach against BFDMACHS to decide
+# which engine to use. Entries in BFDMACHS should be bfd_mach
+# values with "bfd_mach_" removed. ${sim_multi_default} says
+# which entry should be the default.
+if test ${sim_gen} = MULTI; then
+
+ # Simple sanity check.
+ if test -z "${sim_multi_configs}" || test -z "${sim_multi_default}"; then
+ { echo "configure: error: Error in configure.in: MULTI simulator not set up correctly" 1>&2; exit 1; }
+ fi
+
+ # Start in a known state.
+ rm -f multi-include.h multi-run.c
+ sim_multi_flags=
+ sim_multi_src=
+ sim_multi_obj=multi-run.o
+ sim_multi_igen_configs=
+ sim_seen_default=no
+
+ cat << __EOF__ > multi-run.c
+/* Main entry point for MULTI simulators.
+ Copyright (C) 2003 Free Software Foundation, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+
+ --
+
+ This file was generated by sim/mips/configure. */
+
+#include "sim-main.h"
+#include "multi-include.h"
+
+#define SD sd
+#define CPU cpu
+
+void
+sim_engine_run (SIM_DESC sd,
+ int next_cpu_nr,
+ int nr_cpus,
+ int signal) /* ignore */
+{
+ int mach;
+
+ if (STATE_ARCHITECTURE (sd) == NULL)
+ mach = bfd_mach_${sim_multi_default};
+ else
+ mach = STATE_ARCHITECTURE (SD)->mach;
+
+ switch (mach)
+ {
+__EOF__
+
+ for fc in ${sim_multi_configs}; do
+
+ # Split up the entry. ${c} contains the first three elements.
+ # Note: outer sqaure brackets are m4 quotes.
+ c=`echo ${fc} | sed 's/:[^:]*$//'`
+ bfdmachs=`echo ${fc} | sed 's/.*://'`
+ name=`echo ${c} | sed 's/:.*//'`
+ machine=`echo ${c} | sed 's/.*:\(.*\):.*/\1/'`
+ filter=`echo ${c} | sed 's/.*://'`
+
+ # Build the following lists:
+ #
+ # sim_multi_flags: all -M and -F flags used by the simulator
+ # sim_multi_src: all makefile-generated source files
+ # sim_multi_obj: the objects for ${sim_multi_src}
+ # sim_multi_igen_configs: igen configuration strings.
+ #
+ # Each entry in ${sim_multi_igen_configs} is a prefix (m32
+ # or m16) followed by the NAME, MACHINE and FILTER part of
+ # the ${sim_multi_configs} entry.
+ sim_multi_flags="${sim_multi_flags} -F ${filter} -M ${machine}"
+
+ # Check whether mips16 handling is needed.
+ case ${c} in
+ *:*mips16*:*)
+ # Run igen twice, once for normal mode and once for mips16.
+ ws="m32 m16"
+
+ # The top-level function for the mips16 simulator is
+ # in a file m16${name}_run.c, generated by the
+ # tmp-run-multi Makefile rule.
+ sim_multi_src="${sim_multi_src} m16${name}_run.c"
+ sim_multi_obj="${sim_multi_obj} m16${name}_run.o"
+ sim_multi_flags="${sim_multi_flags} -F 16"
+ ;;
+ *)
+ ws=m32
+ ;;
+ esac
+
+ # Now add the list of igen-generated files to ${sim_multi_src}
+ # and ${sim_multi_obj}.
+ for w in ${ws}; do
+ for base in engine icache idecode model semantics support; do
+ sim_multi_src="${sim_multi_src} ${w}${name}_${base}.c"
+ sim_multi_src="${sim_multi_src} ${w}${name}_${base}.h"
+ sim_multi_obj="${sim_multi_obj} ${w}${name}_${base}.o"
+ done
+ sim_multi_igen_configs="${sim_multi_igen_configs} ${w}${c}"
+ done
+
+ # Add an include for the engine.h file. This file declares the
+ # top-level foo_engine_run() function.
+ echo "#include \"${w}${name}_engine.h\"" >> multi-include.h
+
+ # Add case statements for this engine to sim_engine_run().
+ for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do
+ echo " case bfd_mach_${mach}:" >> multi-run.c
+ if test ${mach} = ${sim_multi_default}; then
+ echo " default:" >> multi-run.c
+ sim_seen_default=yes
+ fi
+ done
+ echo " ${w}${name}_engine_run (sd, next_cpu_nr, nr_cpus, signal);" \
+ >> multi-run.c
+ echo " break;" >> multi-run.c
+ done
+
+ # Check whether we added a 'default:' label.
+ if test ${sim_seen_default} = no; then
+ { echo "configure: error: Error in configure.in: \${sim_multi_configs} doesn't have an entry for \${sim_multi_default}" 1>&2; exit 1; }
+ fi
+
+ cat << __EOF__ >> multi-run.c
+ }
+}
+
+int
+mips_mach_multi (SIM_DESC sd)
+{
+ if (STATE_ARCHITECTURE (sd) == NULL)
+ return bfd_mach_${sim_multi_default};
+
+ switch (STATE_ARCHITECTURE (SD)->mach)
+ {
+__EOF__
+
+ # Add case statements for this engine to mips_mach_multi().
+ for fc in ${sim_multi_configs}; do
+
+ # Split up the entry. ${c} contains the first three elements.
+ # Note: outer sqaure brackets are m4 quotes.
+ c=`echo ${fc} | sed 's/:[^:]*$//'`
+ bfdmachs=`echo ${fc} | sed 's/.*://'`
+
+ for mach in `echo ${bfdmachs} | sed 's/,/ /g'`; do
+ echo " case bfd_mach_${mach}:" >> multi-run.c
+ done
+ done
+
+ cat << __EOF__ >> multi-run.c
+ return (STATE_ARCHITECTURE (SD)->mach);
+ default:
+ return bfd_mach_${sim_multi_default};
+ }
+}
+__EOF__
+
+ SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_MULTI"
+else
+ # For clean-extra
+ sim_multi_src=doesnt-exist.c
+
+ if test x"${sim_mach_default}" = x""; then
+ { echo "configure: error: Error in configure.in: \${sim_mach_default} not defined" 1>&2; exit 1; }
+ fi
+ SIM_SUBTARGET="$SIM_SUBTARGET -DMIPS_MACH_DEFAULT=bfd_mach_${sim_mach_default}"
+fi
sim_igen_flags="-F ${sim_igen_filter} ${sim_igen_machine} ${sim_igen_smp}"
sim_m16_flags=" -F ${sim_m16_filter} ${sim_m16_machine} ${sim_igen_smp}"
+
+
+
+
#
# Add simulated hardware devices
#
hw_enabled=no
case "${target}" in
-# start-sanitize-tx3904
mips*tx39*)
hw_enabled=yes
hw_extra_devices="tx3904cpu tx3904irc tx3904tmr tx3904sio"
mips_extra_objs="dv-sockser.o"
SIM_SUBTARGET="$SIM_SUBTARGET -DTARGET_TX3904=1"
;;
-# end-sanitize-tx3904
-# start-sanitize-sky
- mips64r59*-sky-*)
- mips_extra_objs='$(SIM_SKY_OBJS)'
- SIM_SUBTARGET="-DTARGET_SKY -DWITH_DEVICES=1 -DDEVICE_INIT=1"
- ;;
- mips64*-skyb-*)
- mips_extra_objs='$(SIM_SKY_OBJS)'
- SIM_SUBTARGET="-DTARGET_SKY -DTARGET_SKY_B -DWITH_DEVICES=1 -DDEVICE_INIT=1"
- ;;
-# end-sanitize-sky
*)
mips_extra_objs=""
;;
# Choose simulator engine
case "${target}" in
-# start-sanitize-sky
- mips64r59*-sky-*)
- mips_igen_engine=""
- ;;
- mips64*-skyb-*)
- mips_igen_engine=""
- ;;
-# end-sanitize-sky
*) mips_igen_engine="engine.o"
;;
esac
# Uses ac_ vars as temps to allow command line to override cache and checks.
# --without-x overrides everything else, but does not touch the cache.
echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:4114: checking for X" >&5
+echo "configure:4435: checking for X" >&5
# Check whether --with-x or --without-x was given.
if test "${with_x+set}" = set; then
# First, try using that file with no special directory specified.
cat > conftest.$ac_ext <<EOF
-#line 4176 "configure"
+#line 4497 "configure"
#include "confdefs.h"
#include <$x_direct_test_include>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4502: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
ac_save_LIBS="$LIBS"
LIBS="-l$x_direct_test_library $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 4250 "configure"
+#line 4571 "configure"
#include "confdefs.h"
int main() {
${x_direct_test_function}()
; return 0; }
EOF
-if { (eval echo configure:4257: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
LIBS="$ac_save_LIBS"
# We can link X programs with no special library path.
fi
mips_extra_libs=""
-# start-sanitize-sky
-# Enable GPU2 library
-# Check whether --with-sim-gpu2 or --without-sim-gpu2 was given.
-if test "${with_sim_gpu2+set}" = set; then
- withval="$with_sim_gpu2"
- if test -d "${withval}"
-then
- SIM_SUBTARGET="${SIM_SUBTARGET} -DSKY_GPU2 -I${withval}/include"
- mips_extra_libs="-L${withval}/lib -lgpu2 -L${x_libraries} -lX11 -lXext"
- WITH_GPU2="yes" ; export WITH_GPU2
-
- # complex X/etc. detection; stolen shamelessly from tcl/tk/gdb configury. --angela
-
- #--------------------------------------------------------------------
- # Locate the X11 header files and the X11 library archive. Try
- # the ac_path_x macro first, but if it doesn't find the X stuff
- # (e.g. because there's no xmkmf program) then check through
- # a list of possible directories. Under some conditions the
- # autoconf macro will return an include directory that contains
- # no include files, so double-check its result just to be safe.
- #--------------------------------------------------------------------
-
- # If we find X, set shell vars x_includes and x_libraries to the
-# paths, otherwise set no_x=yes.
-# Uses ac_ vars as temps to allow command line to override cache and checks.
-# --without-x overrides everything else, but does not touch the cache.
-echo $ac_n "checking for X""... $ac_c" 1>&6
-echo "configure:4371: checking for X" >&5
-# Check whether --with-x or --without-x was given.
-if test "${with_x+set}" = set; then
- withval="$with_x"
- :
-fi
-# $have_x is `yes', `no', `disabled', or empty when we do not yet know.
-if test "x$with_x" = xno; then
- # The user explicitly disabled X.
- have_x=disabled
-else
- if test "x$x_includes" != xNONE && test "x$x_libraries" != xNONE; then
- # Both variables are already set.
- have_x=yes
- else
-if eval "test \"`echo '$''{'ac_cv_have_x'+set}'`\" = set"; then
+for ac_hdr in string.h strings.h stdlib.h stdlib.h
+do
+ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
+echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
+echo "configure:4671: checking for $ac_hdr" >&5
+if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
- # One or both of the vars are not set, and there is no cached value.
-ac_x_includes=NO ac_x_libraries=NO
-rm -fr conftestdir
-if mkdir conftestdir; then
- cd conftestdir
- # Make sure to not put "make" in the Imakefile rules, since we grep it out.
- cat > Imakefile <<'EOF'
-acfindx:
- @echo 'ac_im_incroot="${INCROOT}"; ac_im_usrlibdir="${USRLIBDIR}"; ac_im_libdir="${LIBDIR}"'
-EOF
- if (xmkmf) >/dev/null 2>/dev/null && test -f Makefile; then
- # GNU make sometimes prints "make[1]: Entering...", which would confuse us.
- eval `${MAKE-make} acfindx 2>/dev/null | grep -v make`
- # Open Windows xmkmf reportedly sets LIBDIR instead of USRLIBDIR.
- for ac_extension in a so sl; do
- if test ! -f $ac_im_usrlibdir/libX11.$ac_extension &&
- test -f $ac_im_libdir/libX11.$ac_extension; then
- ac_im_usrlibdir=$ac_im_libdir; break
- fi
- done
- # Screen out bogus values from the imake configuration. They are
- # bogus both because they are the default anyway, and because
- # using them would break gcc on systems where it needs fixed includes.
- case "$ac_im_incroot" in
- /usr/include) ;;
- *) test -f "$ac_im_incroot/X11/Xos.h" && ac_x_includes="$ac_im_incroot" ;;
- esac
- case "$ac_im_usrlibdir" in
- /usr/lib | /lib) ;;
- *) test -d "$ac_im_usrlibdir" && ac_x_libraries="$ac_im_usrlibdir" ;;
- esac
- fi
- cd ..
- rm -fr conftestdir
-fi
-
-if test "$ac_x_includes" = NO; then
- # Guess where to find include files, by looking for this one X11 .h file.
- test -z "$x_direct_test_include" && x_direct_test_include=X11/Intrinsic.h
-
- # First, try using that file with no special directory specified.
-cat > conftest.$ac_ext <<EOF
-#line 4433 "configure"
-#include "confdefs.h"
-#include <$x_direct_test_include>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4438: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- rm -rf conftest*
- # We can compile using X headers with no special include directory.
-ac_x_includes=
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- # Look for the header file in a standard set of common directories.
-# Check X11 before X11Rn because it is often a symlink to the current release.
- for ac_dir in \
- /usr/X11/include \
- /usr/X11R6/include \
- /usr/X11R5/include \
- /usr/X11R4/include \
- \
- /usr/include/X11 \
- /usr/include/X11R6 \
- /usr/include/X11R5 \
- /usr/include/X11R4 \
- \
- /usr/local/X11/include \
- /usr/local/X11R6/include \
- /usr/local/X11R5/include \
- /usr/local/X11R4/include \
- \
- /usr/local/include/X11 \
- /usr/local/include/X11R6 \
- /usr/local/include/X11R5 \
- /usr/local/include/X11R4 \
- \
- /usr/X386/include \
- /usr/x386/include \
- /usr/XFree86/include/X11 \
- \
- /usr/include \
- /usr/local/include \
- /usr/unsupported/include \
- /usr/athena/include \
- /usr/local/x11r5/include \
- /usr/lpp/Xamples/include \
- \
- /usr/openwin/include \
- /usr/openwin/share/include \
- ; \
- do
- if test -r "$ac_dir/$x_direct_test_include"; then
- ac_x_includes=$ac_dir
- break
- fi
- done
-fi
-rm -f conftest*
-fi # $ac_x_includes = NO
-
-if test "$ac_x_libraries" = NO; then
- # Check for the libraries.
-
- test -z "$x_direct_test_library" && x_direct_test_library=Xt
- test -z "$x_direct_test_function" && x_direct_test_function=XtMalloc
-
- # See if we find them without any special options.
- # Don't add to $LIBS permanently.
- ac_save_LIBS="$LIBS"
- LIBS="-l$x_direct_test_library $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 4507 "configure"
-#include "confdefs.h"
-
-int main() {
-${x_direct_test_function}()
-; return 0; }
-EOF
-if { (eval echo configure:4514: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# We can link X programs with no special library path.
-ac_x_libraries=
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- LIBS="$ac_save_LIBS"
-# First see if replacing the include by lib works.
-# Check X11 before X11Rn because it is often a symlink to the current release.
-for ac_dir in `echo "$ac_x_includes" | sed s/include/lib/` \
- /usr/X11/lib \
- /usr/X11R6/lib \
- /usr/X11R5/lib \
- /usr/X11R4/lib \
- \
- /usr/lib/X11 \
- /usr/lib/X11R6 \
- /usr/lib/X11R5 \
- /usr/lib/X11R4 \
- \
- /usr/local/X11/lib \
- /usr/local/X11R6/lib \
- /usr/local/X11R5/lib \
- /usr/local/X11R4/lib \
- \
- /usr/local/lib/X11 \
- /usr/local/lib/X11R6 \
- /usr/local/lib/X11R5 \
- /usr/local/lib/X11R4 \
- \
- /usr/X386/lib \
- /usr/x386/lib \
- /usr/XFree86/lib/X11 \
- \
- /usr/lib \
- /usr/local/lib \
- /usr/unsupported/lib \
- /usr/athena/lib \
- /usr/local/x11r5/lib \
- /usr/lpp/Xamples/lib \
- /lib/usr/lib/X11 \
- \
- /usr/openwin/lib \
- /usr/openwin/share/lib \
- ; \
-do
- for ac_extension in a so sl; do
- if test -r $ac_dir/lib${x_direct_test_library}.$ac_extension; then
- ac_x_libraries=$ac_dir
- break 2
- fi
- done
-done
-fi
-rm -f conftest*
-fi # $ac_x_libraries = NO
-
-if test "$ac_x_includes" = NO || test "$ac_x_libraries" = NO; then
- # Didn't find X anywhere. Cache the known absence of X.
- ac_cv_have_x="have_x=no"
-else
- # Record where we found X for the cache.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$ac_x_includes ac_x_libraries=$ac_x_libraries"
-fi
-fi
- fi
- eval "$ac_cv_have_x"
-fi # $with_x != no
-
-if test "$have_x" != yes; then
- echo "$ac_t""$have_x" 1>&6
- no_x=yes
-else
- # If each of the values was on the command line, it overrides each guess.
- test "x$x_includes" = xNONE && x_includes=$ac_x_includes
- test "x$x_libraries" = xNONE && x_libraries=$ac_x_libraries
- # Update the cache value to reflect the command line values.
- ac_cv_have_x="have_x=yes \
- ac_x_includes=$x_includes ac_x_libraries=$x_libraries"
- echo "$ac_t""libraries $x_libraries, headers $x_includes" 1>&6
-fi
-
- not_really_there=""
- if test "$no_x" = ""; then
- if test "$x_includes" = ""; then
- cat > conftest.$ac_ext <<EOF
-#line 4604 "configure"
-#include "confdefs.h"
-#include <X11/XIntrinsic.h>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4609: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- not_really_there="yes"
-fi
-rm -f conftest*
- else
- if test ! -r $x_includes/X11/Intrinsic.h; then
- not_really_there="yes"
- fi
- fi
- fi
- if test "$no_x" = "yes" -o "$not_really_there" = "yes"; then
- echo $ac_n "checking for X11 header files""... $ac_c" 1>&6
-echo "configure:4629: checking for X11 header files" >&5
- XINCLUDES="# no special path needed"
- cat > conftest.$ac_ext <<EOF
-#line 4632 "configure"
-#include "confdefs.h"
-#include <X11/Intrinsic.h>
+ cat > conftest.$ac_ext <<EOF
+#line 4676 "configure"
+#include "confdefs.h"
+#include <$ac_hdr>
EOF
ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:4637: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
-ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
-if test -z "$ac_err"; then
- :
-else
- echo "$ac_err" >&5
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- XINCLUDES="nope"
-fi
-rm -f conftest*
- if test "$XINCLUDES" = nope; then
- dirs="/usr/unsupported/include /usr/local/include /usr/X386/include /usr/X11R6/include /usr/X11R5/include /usr/include/X11R5 /usr/include/X11R4 /usr/openwin/include /usr/X11/include /usr/sww/include"
- for i in $dirs ; do
- if test -r $i/X11/Intrinsic.h; then
- echo "$ac_t""$i" 1>&6
- XINCLUDES=" -I$i"
- break
- fi
- done
- fi
- else
- if test "$x_includes" != ""; then
- XINCLUDES=-I$x_includes
- else
- XINCLUDES="# no special path needed"
- fi
- fi
- if test "$XINCLUDES" = nope; then
- echo "$ac_t""couldn't find any!" 1>&6
- XINCLUDES="# no include files found"
- fi
-
- if test "$no_x" = yes; then
- echo $ac_n "checking for X11 libraries""... $ac_c" 1>&6
-echo "configure:4673: checking for X11 libraries" >&5
- XLIBSW=nope
- dirs="/usr/unsupported/lib /usr/local/lib /usr/X386/lib /usr/X11R6/lib /usr/X11R5/lib /usr/lib/X11R5 /usr/lib/X11R4 /usr/lib/X11 /usr/openwin/lib /usr/X11/lib /usr/sww/X11/lib"
- for i in $dirs ; do
- if test -r $i/libX11.a -o -r $i/libX11.so -o -r $i/libX11.sl; then
- echo "$ac_t""$i" 1>&6
- XLIBSW="-L$i -lX11"
- x_libraries="$i"
- break
- fi
- done
- else
- if test "$x_libraries" = ""; then
- XLIBSW=-lX11
- else
- XLIBSW="-L$x_libraries -lX11"
- fi
- fi
- if test "$XLIBSW" = nope ; then
- echo $ac_n "checking for XCreateWindow in -lXwindow""... $ac_c" 1>&6
-echo "configure:4693: checking for XCreateWindow in -lXwindow" >&5
-ac_lib_var=`echo Xwindow'_'XCreateWindow | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lXwindow $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 4701 "configure"
-#include "confdefs.h"
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char XCreateWindow();
-
-int main() {
-XCreateWindow()
-; return 0; }
-EOF
-if { (eval echo configure:4712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- XLIBSW=-lXwindow
-else
- echo "$ac_t""no" 1>&6
-fi
-
- fi
- if test "$XLIBSW" = nope ; then
- echo "$ac_t""couldn't find any! Using -lX11." 1>&6
- XLIBSW=-lX11
- fi
-
- #--------------------------------------------------------------------
- # Various manipulations on the search path used at runtime to
- # find shared libraries:
- # 1. If the X library binaries are in a non-standard directory,
- # add the X library location into that search path.
- # 2. On systems such as AIX and Ultrix that use "-L" as the
- # search path option, colons cannot be used to separate
- # directories from each other. Change colons to " -L".
- # 3. Create two sets of search flags, one for use in cc lines
- # and the other for when the linker is invoked directly. In
- # the second case, '-Wl,' must be stripped off and commas must
- # be replaced by spaces.
- #--------------------------------------------------------------------
-
- #
- # CYGNUS LOCAL: statically link on Solaris, HPUX & SunOS so that
- # we don't have problems with people not having libraries
- # installed or not having LD_LIBRARY_PATH set.
- #
-
- case "$host" in
- #
- # gdb linked statically w/ Solaris iff GCC and GNU ld are used,
- # otherwise dynamic
- #
- sparc-sun-solaris2*)
- sol_xlibsw=
- if test "x$GCC" = "xyes" ; then
- # This is probably the simplest way to test for GNU ld.
- # It only works with relatively recent versions of GNU
- # ld.
- gld_text=`$CC -Wl,--version 2>&1 | sed 1q`
- case "$gld_text" in
- GNU* | *BFD*)
- # Why do we link against libX11 twice? Because the
- # Openwin X11 and Xext libraries are seriously broken.
- sol_xlibsw="-Wl,-Bstatic $XLIBSW -lXext -lX11 -Wl,-Bdynamic"
- ;;
- esac
- fi
- if test -z "$sol_xlibsw"; then
- if test "x$x_libraries" != "x"; then
- XLIBSW="$XLIBSW -R$x_libraries"
- fi
- else
- XLIBSW=$sol_xlibsw
- suppress_enable_shared=yes
- fi
- ;;
- #
- # gdb linked statically w/ SunOS or HPUX
- #
- m68k-hp-hpux*|hppa*-hp-hpux*|sparc-sun-sunos*)
- if test "x$x_libraries" != "x" ;
- then
- XLIBSW="$x_libraries/libX11.a"
- else
- XLIBSW="/usr/lib/libX11.a"
- fi
- suppress_enable_shared=yes
- ;;
- #
- # default is to link dynamically
- #
- *)
- ;;
- esac
- #
- # END CYGNUS LOCAL
-
-
- #--------------------------------------------------------------------
- # Check for the existence of various libraries. The order here
- # is important, so that then end up in the right order in the
- # command line generated by make. The -lsocket and -lnsl libraries
- # require a couple of special tricks:
- # 1. Use "connect" and "accept" to check for -lsocket, and
- # "gethostbyname" to check for -lnsl.
- # 2. Use each function name only once: can't redo a check because
- # autoconf caches the results of the last check and won't redo it.
- # 3. Use -lnsl and -lsocket only if they supply procedures that
- # aren't already present in the normal libraries. This is because
- # IRIX 5.2 has libraries, but they aren't needed and they're
- # bogus: they goof up name resolution if used.
- # 4. On some SVR4 systems, can't use -lsocket without -lnsl too.
- # To get around this problem, check for both libraries together
- # if -lsocket doesn't work by itself.
- #--------------------------------------------------------------------
-
- echo $ac_n "checking for main in -lXbsd""... $ac_c" 1>&6
-echo "configure:4828: checking for main in -lXbsd" >&5
-ac_lib_var=`echo Xbsd'_'main | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lXbsd $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 4836 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:4843: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- SOCKLIBSW="$SOCKLIBSW -lXbsd"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-
- # CYGNUS LOCAL: Store any socket library(ies) in the cache, and don't
- # mess up the cache values of the functions we check for.
- echo $ac_n "checking for socket libraries""... $ac_c" 1>&6
-echo "configure:4867: checking for socket libraries" >&5
-if eval "test \"`echo '$''{'sim_cv_lib_sockets'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- sim_cv_lib_sockets=
- sim_checkBoth=0
- unset ac_cv_func_connect
- echo $ac_n "checking for connect""... $ac_c" 1>&6
-echo "configure:4875: checking for connect" >&5
-if eval "test \"`echo '$''{'ac_cv_func_connect'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4880 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char connect(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char connect();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_connect) || defined (__stub___connect)
-choke me
-#else
-connect();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:4903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_connect=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_connect=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'connect`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- sim_checkSocket=0
-else
- echo "$ac_t""no" 1>&6
-sim_checkSocket=1
-fi
-
- if test "$sim_checkSocket" = 1; then
- unset ac_cv_func_connect
- echo $ac_n "checking for main in -lsocket""... $ac_c" 1>&6
-echo "configure:4926: checking for main in -lsocket" >&5
-ac_lib_var=`echo socket'_'main | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lsocket $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 4934 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:4941: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- sim_cv_lib_sockets="-lsocket"
-else
- echo "$ac_t""no" 1>&6
-sim_checkBoth=1
-fi
-
- fi
- if test "$sim_checkBoth" = 1; then
- sim_oldLibs=$SOCKLIBSW
- SOCKLIBSW="$SOCKLIBSW -lsocket -lnsl"
- unset ac_cv_func_accept
- echo $ac_n "checking for accept""... $ac_c" 1>&6
-echo "configure:4968: checking for accept" >&5
-if eval "test \"`echo '$''{'ac_cv_func_accept'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 4973 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char accept(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char accept();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_accept) || defined (__stub___accept)
-choke me
-#else
-accept();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:4996: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_accept=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_accept=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'accept`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- sim_checkNsl=0
- sim_cv_lib_sockets="-lsocket -lnsl"
-else
- echo "$ac_t""no" 1>&6
-fi
-
- unset ac_cv_func_accept
- SOCKLIBSW=$sim_oldLibs
- fi
- unset ac_cv_func_gethostbyname
- sim_oldLibs=$SOCKLIBSW
- SOCKLIBSW="$SOCKLIBSW $sim_cv_lib_sockets"
- echo $ac_n "checking for gethostbyname""... $ac_c" 1>&6
-echo "configure:5023: checking for gethostbyname" >&5
-if eval "test \"`echo '$''{'ac_cv_func_gethostbyname'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5028 "configure"
-#include "confdefs.h"
-/* System header to define __stub macros and hopefully few prototypes,
- which can conflict with char gethostbyname(); below. */
-#include <assert.h>
-/* Override any gcc2 internal prototype to avoid an error. */
-/* We use char because int might match the return type of a gcc2
- builtin and then its argument prototype would still apply. */
-char gethostbyname();
-
-int main() {
-
-/* The GNU C library defines this for functions which it implements
- to always fail with ENOSYS. Some functions are actually named
- something starting with __ and the normal name is an alias. */
-#if defined (__stub_gethostbyname) || defined (__stub___gethostbyname)
-choke me
-#else
-gethostbyname();
-#endif
-
-; return 0; }
-EOF
-if { (eval echo configure:5051: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_func_gethostbyname=no"
-fi
-rm -f conftest*
-fi
-
-if eval "test \"`echo '$ac_cv_func_'gethostbyname`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- :
-else
- echo "$ac_t""no" 1>&6
-echo $ac_n "checking for main in -lnsl""... $ac_c" 1>&6
-echo "configure:5069: checking for main in -lnsl" >&5
-ac_lib_var=`echo nsl'_'main | sed 'y%./+-%__p_%'`
-if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- ac_save_LIBS="$LIBS"
-LIBS="-lnsl $LIBS"
-cat > conftest.$ac_ext <<EOF
-#line 5077 "configure"
-#include "confdefs.h"
-
-int main() {
-main()
-; return 0; }
-EOF
-if { (eval echo configure:5084: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=yes"
-else
- echo "configure: failed program was:" >&5
- cat conftest.$ac_ext >&5
- rm -rf conftest*
- eval "ac_cv_lib_$ac_lib_var=no"
-fi
-rm -f conftest*
-LIBS="$ac_save_LIBS"
-
-fi
-if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then
- echo "$ac_t""yes" 1>&6
- sim_cv_lib_sockets="$sim_cv_lib_sockets -lnsl"
-else
- echo "$ac_t""no" 1>&6
-fi
-
-fi
-
- unset ac_cv_func_gethostbyname
- SOCKLIBSW=$sim_oldSOCKLIBSW
-
-fi
-
-echo "$ac_t""$sim_cv_lib_sockets" 1>&6
- test -z "$sim_cv_lib_sockets" || SOCKLIBSW="$SOCKLIBSW $sim_cv_lib_sockets"
-
- mips_extra_libs="-L${withval}/lib -lgpu2 -lm $XLIBSW $SOCKLIBSW"
- cat > simConfig.sh << --EOF--
-mips_extra_libs="$mips_extra_libs"
---EOF--
-
-else
- { echo "configure: error: "Directory ${withval} does not exist."" 1>&2; exit 1; };
-fi
-fi
-
-
-# Enable target accurate FP library
-# Check whether --with-sim-funit or --without-sim-funit was given.
-if test "${with_sim_funit+set}" = set; then
- withval="$with_sim_funit"
- if test -d "${withval}"
-then
- SIM_SUBTARGET="${SIM_SUBTARGET} -DSKY_FUNIT -I${withval}/include"
- mips_extra_libs="${mips_extra_libs} -L${withval}/lib -lfunit"
-else
- { echo "configure: error: "Directory ${withval} does not exist."" 1>&2; exit 1; };
-fi
-fi
-# end-sanitize-sky
-
-
-for ac_hdr in string.h strings.h stdlib.h stdlib.h
-do
-ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
-echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:5144: checking for $ac_hdr" >&5
-if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
- echo $ac_n "(cached) $ac_c" 1>&6
-else
- cat > conftest.$ac_ext <<EOF
-#line 5149 "configure"
-#include "confdefs.h"
-#include <$ac_hdr>
-EOF
-ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:5154: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:4681: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"`
if test -z "$ac_err"; then
rm -rf conftest*
done
echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6
-echo "configure:5181: checking for fabs in -lm" >&5
+echo "configure:4708: checking for fabs in -lm" >&5
ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'`
if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
ac_save_LIBS="$LIBS"
LIBS="-lm $LIBS"
cat > conftest.$ac_ext <<EOF
-#line 5189 "configure"
+#line 4716 "configure"
#include "confdefs.h"
/* Override any gcc2 internal prototype to avoid an error. */
/* We use char because int might match the return type of a gcc2
fabs()
; return 0; }
EOF
-if { (eval echo configure:5200: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4727: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_lib_$ac_lib_var=yes"
else
for ac_func in aint anint sqrt
do
echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:5230: checking for $ac_func" >&5
+echo "configure:4757: checking for $ac_func" >&5
if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
echo $ac_n "(cached) $ac_c" 1>&6
else
cat > conftest.$ac_ext <<EOF
-#line 5235 "configure"
+#line 4762 "configure"
#include "confdefs.h"
/* System header to define __stub macros and hopefully few prototypes,
which can conflict with char $ac_func(); below. */
; return 0; }
EOF
-if { (eval echo configure:5258: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
+if { (eval echo configure:4785: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then
rm -rf conftest*
eval "ac_cv_func_$ac_func=yes"
else
+cgen_breaks=""
+if grep CGEN_MAINT $srcdir/Makefile.in >/dev/null; then
+cgen_breaks="break cgen_rtx_error";
+fi
+
trap '' 1 2 15
cat > confcache <<\EOF
# This file is a shell script that caches the results of configure
# Ultrix sh set writes to stderr and can't be redirected directly,
# and sets the high bit in the cache file unless we assign to the vars.
(set) 2>&1 |
- case `(ac_space=' '; set) 2>&1 | grep ac_space` in
+ case `(ac_space=' '; set | grep ac_space) 2>&1` in
*ac_space=\ *)
# `set' does not quote correctly, so add quotes (double-quote substitution
# turns \\\\ into \\, and sed turns \\ into \).
echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
-version | --version | --versio | --versi | --vers | --ver | --ve | --v)
- echo "$CONFIG_STATUS generated by autoconf version 2.12.2"
+ echo "$CONFIG_STATUS generated by autoconf version 2.13"
exit 0 ;;
-help | --help | --hel | --he | --h)
echo "\$ac_cs_usage"; exit 0 ;;
s%@sim_smp@%$sim_smp%g
s%@sim_stdcall@%$sim_stdcall%g
s%@sim_xor_endian@%$sim_xor_endian%g
-s%@build_warnings@%$build_warnings%g
+s%@WARN_CFLAGS@%$WARN_CFLAGS%g
+s%@WERROR_CFLAGS@%$WERROR_CFLAGS%g
s%@SHELL@%$SHELL%g
s%@CFLAGS@%$CFLAGS%g
s%@CPPFLAGS@%$CPPFLAGS%g
s%@CXXFLAGS@%$CXXFLAGS%g
+s%@FFLAGS@%$FFLAGS%g
s%@DEFS@%$DEFS%g
s%@LDFLAGS@%$LDFLAGS%g
s%@LIBS@%$LIBS%g
s%@build_os@%$build_os%g
s%@CC@%$CC%g
s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g
+s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g
s%@INSTALL_DATA@%$INSTALL_DATA%g
s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g
s%@HDEFINES@%$HDEFINES%g
s%@sim_igen_flags@%$sim_igen_flags%g
s%@sim_m16_flags@%$sim_m16_flags%g
s%@sim_gen@%$sim_gen%g
+s%@sim_multi_flags@%$sim_multi_flags%g
+s%@sim_multi_igen_configs@%$sim_multi_igen_configs%g
+s%@sim_multi_src@%$sim_multi_src%g
+s%@sim_multi_obj@%$sim_multi_obj%g
s%@mips_extra_objs@%$mips_extra_objs%g
s%@mips_igen_engine@%$mips_igen_engine%g
s%@mips_extra_libs@%$mips_extra_libs%g
+s%@cgen_breaks@%$cgen_breaks%g
CEOF
EOF
projects / deliverable / binutils-gdb.git / blobdiff