#define PROFILE (1)
#endif
+#include "config.h"
+
#include <stdio.h>
#include <stdarg.h>
#include <ansidecl.h>
#include <ctype.h>
#include <limits.h>
#include <math.h>
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
#include "getopt.h"
#include "libiberty.h"
#include "support.h" /* internal support manifests */
+#include "sysdep.h"
+
+#ifndef SIGBUS
+#define SIGBUS SIGSEGV
+#endif
+
/* Get the simulator engine description, without including the code: */
#define SIM_MANIFESTS
#include "engine.c"
static host_callback *callback = NULL; /* handle onto the current callback structure */
-/* The warning system should be improved, to allow more information to
- be passed about the cause: */
-#define WARNING(m) { callback->printf_filtered(callback,"SIM Warning: %s\n",(m)); }
-
/* This is nasty, since we have to rely on matching the register
numbers used by GDB. Unfortunately, depending on the MIPS target
GDB uses different register numbers. We cannot just include the
/* To keep this default simulator simple, and fast, we use a direct
vector of registers. The internal simulator engine then uses
manifests to access the correct slot. */
-ut_reg registers[LAST_EMBED_REGNUM + 1];
-int register_widths[LAST_EMBED_REGNUM + 1];
+static ut_reg registers[LAST_EMBED_REGNUM + 1];
+static int register_widths[LAST_EMBED_REGNUM + 1];
#define GPR (®isters[0])
#if defined(HASFPU)
#define SP (registers[29])
#define RA (registers[31])
-ut_reg EPC = 0; /* Exception PC */
+static ut_reg EPC = 0; /* Exception PC */
#if defined(HASFPU)
/* Keep the current format state for each register: */
-FP_formats fpr_state[32];
+static FP_formats fpr_state[32];
#endif /* HASFPU */
/* VR4300 CP0 configuration register: */
-unsigned int CONFIG = 0;
+static unsigned int CONFIG = 0;
/* The following are internal simulator state variables: */
-ut_reg IPC = 0; /* internal Instruction PC */
-ut_reg DSPC = 0; /* delay-slot PC */
+static ut_reg IPC = 0; /* internal Instruction PC */
+static ut_reg DSPC = 0; /* delay-slot PC */
/* TODO : these should be the bitmasks for these bits within the
the register update to be delayed for a single instruction
cycle. */
#define PSLOTS (5) /* Maximum number of instruction cycles */
-int pending_in;
-int pending_out;
-int pending_total;
-int pending_slot_count[PSLOTS];
-int pending_slot_reg[PSLOTS];
-ut_reg pending_slot_value[PSLOTS];
+static int pending_in;
+static int pending_out;
+static int pending_total;
+static int pending_slot_count[PSLOTS];
+static int pending_slot_reg[PSLOTS];
+static ut_reg pending_slot_value[PSLOTS];
/* The following are not used for MIPS IV onwards: */
#define PENDING_FILL(r,v) {\
-printf("DBG: FILL BEFORE pending_in = %d, pending_out = %d, pending_total = %d\n",pending_in,pending_out,pending_total);\
+/* printf("DBG: FILL BEFORE pending_in = %d, pending_out = %d, pending_total = %d\n",pending_in,pending_out,pending_total); */\
if (pending_slot_reg[pending_in] != (LAST_EMBED_REGNUM + 1))\
- callback->printf_filtered(callback,"SIM Warning: Attempt to over-write pending value\n");\
+ sim_warning("Attempt to over-write pending value");\
pending_slot_count[pending_in] = 2;\
pending_slot_reg[pending_in] = (r);\
pending_slot_value[pending_in] = (uword64)(v);\
-printf("DBG: FILL reg %d value = 0x%08X%08X\n",(r),WORD64HI(v),WORD64LO(v));\
+/*printf("DBG: FILL reg %d value = 0x%08X%08X\n",(r),WORD64HI(v),WORD64LO(v));*/\
pending_total++;\
pending_in++;\
if (pending_in == PSLOTS)\
pending_in = 0;\
-printf("DBG: FILL AFTER pending_in = %d, pending_out = %d, pending_total = %d\n",pending_in,pending_out,pending_total);\
+/*printf("DBG: FILL AFTER pending_in = %d, pending_out = %d, pending_total = %d\n",pending_in,pending_out,pending_total);*/\
}
-int LLBIT = 0;
+static int LLBIT = 0;
/* LLBIT = Load-Linked bit. A bit of "virtual" state used by atomic
read-write instructions. It is set when a linked load occurs. It is
tested and cleared by the conditional store. It is cleared (during
be atomic. In particular, it is cleared by exception return
instructions. */
-int HIACCESS = 0;
-int LOACCESS = 0;
+static int HIACCESS = 0;
+static int LOACCESS = 0;
/* The HIACCESS and LOACCESS counts are used to ensure that
corruptions caused by using the HI or LO register to close to a
following operation are spotted. */
+static ut_reg HLPC = 0;
+/* TODO: The 4300 has interlocks so we should not need to warn of the possible over-write (CHECK THIS) */
/* If either of the preceding two instructions have accessed the HI or
LO registers, then the values they see should be
undefined. However, to keep the simulator world simple, we just let
them use the value read and raise a warning to notify the user: */
#define CHECKHILO(s) {\
if ((HIACCESS != 0) || (LOACCESS != 0))\
- callback->printf_filtered(callback,"SIM Warning: %s over-writing HI and LO registers values\n",(s));\
- /* Set the access counts, since we are about\
- to update the HI and LO registers: */\
- HIACCESS = LOACCESS = 3; /* 3rd instruction will be safe */\
+ sim_warning("%s over-writing HI and LO registers values (PC = 0x%08X%08X HLPC = 0x%08X%08X)\n",(s),(unsigned int)(PC>>32),(unsigned int)(PC&0xFFFFFFFF),(unsigned int)(HLPC>>32),(unsigned int)(HLPC&0xFFFFFFFF));\
}
/* NOTE: We keep the following status flags as bit values (1 for true,
/* At the moment these values will be the same, since we do not have
access to the pipeline cycle count information from the simulator
engine. */
-unsigned int instruction_fetches = 0;
-unsigned int instruction_fetch_overflow = 0;
-unsigned int pipeline_ticks = 0;
+static unsigned int instruction_fetches = 0;
+static unsigned int instruction_fetch_overflow = 0;
+static unsigned int pipeline_ticks = 0;
#endif
/* Flags in the "state" variable: */
#define simEXCEPTION (1 << 26) /* 0 = no exception; 1 = exception has occurred */
#define simEXIT (1 << 27) /* 0 = do nothing; 1 = run-time exit() processing */
-unsigned int state = 0;
-unsigned int rcexit = 0; /* _exit() reason code holder */
+static unsigned int state = 0;
+static unsigned int rcexit = 0; /* _exit() reason code holder */
#define DELAYSLOT() {\
- if (state & simDELAYSLOT) callback->printf_filtered(callback,"SIM Warning: Delay slot already activated (branch in delay slot?)\n");\
+ if (state & simDELAYSLOT)\
+ sim_warning("Delay slot already activated (branch in delay slot?)");\
state |= simDELAYSLOT;\
}
#define K1SIZE (0x20000000)
/* Very simple memory model to start with: */
-unsigned char *membank = NULL;
-ut_reg membank_base = K1BASE;
-unsigned membank_size = (1 << 20); /* (16 << 20); */ /* power-of-2 */
+static unsigned char *membank = NULL;
+static ut_reg membank_base = K1BASE;
+static unsigned membank_size = (1 << 20); /* (16 << 20); */ /* power-of-2 */
/* Simple run-time monitor support */
-unsigned char *monitor = NULL;
-ut_reg monitor_base = 0xBFC00000;
-unsigned monitor_size = (1 << 11); /* power-of-2 */
+static unsigned char *monitor = NULL;
+static ut_reg monitor_base = 0xBFC00000;
+static unsigned monitor_size = (1 << 11); /* power-of-2 */
+
+static char *logfile = NULL; /* logging disabled by default */
+static FILE *logfh = NULL;
#if defined(TRACE)
-char *tracefile = "trace.din"; /* default filename for trace log */
-FILE *tracefh = NULL;
+static char *tracefile = "trace.din"; /* default filename for trace log */
+static FILE *tracefh = NULL;
#endif /* TRACE */
#if defined(PROFILE)
-unsigned profile_frequency = 256;
-unsigned profile_nsamples = (128 << 10);
-unsigned short *profile_hist = NULL;
-ut_reg profile_minpc;
-ut_reg profile_maxpc;
-int profile_shift = 0; /* address shift amount */
+static unsigned profile_frequency = 256;
+static unsigned profile_nsamples = (128 << 10);
+static unsigned short *profile_hist = NULL;
+static ut_reg profile_minpc;
+static ut_reg profile_maxpc;
+static int profile_shift = 0; /* address shift amount */
#endif /* PROFILE */
/* The following are used to provide shortcuts to the required version
typedef uword64 (*fnptr_read_long) PARAMS((unsigned char *memory));
typedef uword64 (*fnptr_swap_long) PARAMS((uword64 data));
-fnptr_read_word host_read_word;
-fnptr_read_long host_read_long;
-fnptr_swap_word host_swap_word;
-fnptr_swap_long host_swap_long;
+static fnptr_read_word host_read_word;
+static fnptr_read_long host_read_long;
+static fnptr_swap_word host_swap_word;
+static fnptr_swap_long host_swap_long;
/*---------------------------------------------------------------------------*/
/*-- GDB simulator interface ------------------------------------------------*/
/*---------------------------------------------------------------------------*/
static void dotrace PARAMS((FILE *tracefh,int type,unsigned int address,int width,char *comment,...));
+static void sim_warning PARAMS((char *fmt,...));
extern void sim_error PARAMS((char *fmt,...));
static void ColdReset PARAMS((void));
static int AddressTranslation PARAMS((uword64 vAddr,int IorD,int LorS,uword64 *pAddr,int *CCA,int host,int raw));
int argc;
static struct option cmdline[] = {
{"help", 0,0,'h'},
+ {"log", 1,0,'l'},
{"name", 1,0,'n'},
{"profile", 0,0,'p'},
{"size", 1,0,'s'},
switch (c) {
case 'h':
callback->printf_filtered(callback,"Usage:\n\t\
-target sim [-h] [--name=<model>] [--size=<amount>]");
+target sim [-h] [--log=<file>] [--name=<model>] [--size=<amount>]");
#if defined(TRACE)
callback->printf_filtered(callback," [-t [--tracefile=<name>]]");
#endif /* TRACE */
callback->printf_filtered(callback,"\n");
break;
+ case 'l':
+ if (optarg != NULL) {
+ char *tmp;
+ tmp = (char *)malloc(strlen(optarg) + 1);
+ if (tmp == NULL)
+ callback->printf_filtered(callback,"Failed to allocate buffer for logfile name \"%s\"\n",optarg);
+ else {
+ strcpy(tmp,optarg);
+ logfile = tmp;
+ }
+ }
+ break;
+
case 'n':
callback->printf_filtered(callback,"Explicit model selection not yet available (Ignoring \"%s\")\n",optarg);
break;
}
}
+#if 0
if (optind < argc) {
callback->printf_filtered(callback,"Warning: Ignoring spurious non-option arguments ");
while (optind < argc)
callback->printf_filtered(callback,"\"%s\" ",argv[optind++]);
callback->printf_filtered(callback,"\n");
}
+#endif
freeargv(argv);
}
+ if (logfile != NULL) {
+ if (strcmp(logfile,"-") == 0)
+ logfh = stdout;
+ else {
+ logfh = fopen(logfile,"wb+");
+ if (logfh == NULL) {
+ callback->printf_filtered(callback,"Failed to create file \"%s\", writing log information to stderr.\n",tracefile);
+ logfh = stderr;
+ }
+ }
+ }
+
/* If the host has "mmap" available we could use it to provide a
very large virtual address space for the simulator, since memory
would only be allocated within the "mmap" space as it is
if (AddressTranslation(vaddr,isDATA,isSTORE,&paddr,&cca,isTARGET,isRAW))
StoreMemory(cca,AccessLength_WORD,value,paddr,vaddr,isRAW);
else
- callback->printf_filtered(callback,"Failed to write to monitor space 0x%08X%08X\n",WORD64HI(vaddr),WORD64LO(vaddr));
+ sim_error("Failed to write to monitor space 0x%08X%08X",WORD64HI(vaddr),WORD64LO(vaddr));
}
}
if (state & simTRACE) {
tracefh = fopen(tracefile,"wb+");
if (tracefh == NULL) {
- callback->printf_filtered(callback,"Failed to create file \"%s\", writing trace information to stderr.\n",tracefile);
+ sim_warning("Failed to create file \"%s\", writing trace information to stderr.",tracefile);
tracefh = stderr;
}
}
buff[3] = ((val >> 24) & 0xFF);
}
if (fwrite(buff,4,1,fh) != 1) {
- callback->printf_filtered(callback,"Failed to write 4bytes to the profile file\n");
+ sim_warning("Failed to write 4bytes to the profile file");
res = 0;
}
return(res);
buff[1] = ((val >> 8) & 0xFF);
}
if (fwrite(buff,2,1,fh) != 1) {
- callback->printf_filtered(callback,"Failed to write 2bytes to the profile file\n");
+ sim_warning("Failed to write 2bytes to the profile file");
res = 0;
}
return(res);
int loop;
if (pf == NULL)
- callback->printf_filtered(callback,"Failed to open \"gmon.out\" profile file\n");
+ sim_warning("Failed to open \"gmon.out\" profile file");
else {
int ok;
#ifdef DEBUG
state &= ~simTRACE;
#endif /* TRACE */
+ if (logfh != NULL && logfh != stdout && logfh != stderr)
+ fclose(logfh);
+ logfh = NULL;
+
if (membank)
free(membank); /* cfree not available on all hosts */
membank = NULL;
numbering one. We need to know what the width of each logical
register number is for the architecture being simulated. */
if (register_widths[rn] == 0)
- callback->printf_filtered(callback,"Warning: Invalid register width for %d (register store ignored)\n",rn);
+ sim_warning("Invalid register width for %d (register store ignored)",rn);
else {
if (register_widths[rn] == 32)
registers[rn] = host_read_word(memory);
#endif /* DEBUG */
if (register_widths[rn] == 0)
- callback->printf_filtered(callback,"Warning: Invalid register width for %d (register fetch ignored)\n",rn);
+ sim_warning("Invalid register width for %d (register fetch ignored)",rn);
else {
if (register_widths[rn] == 32)
*((unsigned int *)memory) = host_swap_word(registers[rn] & 0xFFFFFFFF);
break;
}
} else if (state & simEXIT) {
+#if 0
printf("DBG: simEXIT (%d)\n",rcexit);
+#endif
*reason = sim_exited;
*sigrc = rcexit;
} else { /* assume single-stepping */
used by other clients of the simulator. */
if (argv || env) {
+#if 0 /* def DEBUG */
callback->printf_filtered(callback,"sim_create_inferior() : passed arguments ignored\n");
-#if 1 /* def DEBUG */
{
char **cptr;
for (cptr = argv; (cptr && *cptr); cptr++)
else
profile_hist = (unsigned short *)realloc(profile_hist,bsize);
if (profile_hist == NULL) {
- callback->printf_filtered(callback,"Failed to allocate VM for profiling buffer (0x%08X bytes)\n",bsize);
+ sim_warning("Failed to allocate VM for profiling buffer (0x%08X bytes)",bsize);
state &= ~simPROFILE;
}
}
{
char *new;
/* Used by "run", and internally, to set the simulated memory size */
+ if (newsize == 0) {
+ callback->printf_filtered(callback,"Zero not valid: Memory size still 0x%08X bytes\n",membank_size);
+ return;
+ }
newsize = power2(newsize);
if (membank == NULL)
new = (char *)calloc(64,(membank_size / 64));
new = (char *)realloc(membank,newsize);
if (new == NULL) {
if (membank == NULL)
- callback->printf_filtered(callback,"Not enough VM for simulation memory of 0x%08X bytes\n",membank_size);
+ sim_error("Not enough VM for simulation memory of 0x%08X bytes",membank_size);
else
- callback->printf_filtered(callback,"Failed to resize memory (still 0x%08X bytes)\n",membank_size);
+ sim_warning("Failed to resize memory (still 0x%08X bytes)",membank_size);
} else {
membank_size = (unsigned)newsize;
membank = new;
- callback->printf_filtered(callback,"Memory size now 0x%08X bytes\n",membank_size);
#if defined(PROFILE)
/* Ensure that we sample across the new memory range */
sim_set_profile_size(profile_nsamples);
if (AddressTranslation(A0,isDATA,isLOAD,&paddr,&cca,isHOST,isREAL))
V0 = callback->open(callback,(char *)((int)paddr),(int)A1);
else
- callback->printf_filtered(callback,"WARNING: Attempt to pass pointer that does not reference simulated memory\n");
+ sim_error("Attempt to pass pointer that does not reference simulated memory");
}
break;
if (AddressTranslation(A1,isDATA,isLOAD,&paddr,&cca,isHOST,isREAL))
V0 = callback->read(callback,(int)A0,(char *)((int)paddr),(int)A2);
else
- callback->printf_filtered(callback,"WARNING: Attempt to pass pointer that does not reference simulated memory\n");
+ sim_error("Attempt to pass pointer that does not reference simulated memory");
}
break;
if (AddressTranslation(A1,isDATA,isLOAD,&paddr,&cca,isHOST,isREAL))
V0 = callback->write(callback,(int)A0,(const char *)((int)paddr),(int)A2);
else
- callback->printf_filtered(callback,"WARNING: Attempt to pass pointer that does not reference simulated memory\n");
+ sim_error("Attempt to pass pointer that does not reference simulated memory");
}
break;
{
char tmp;
if (callback->read_stdin(callback,&tmp,sizeof(char)) != sizeof(char)) {
- callback->printf_filtered(callback,"WARNING: Invalid return from character read\n");
+ sim_error("Invalid return from character read");
V0 = -1;
}
else
break;
case 17: /* void _exit() */
- callback->printf_filtered(callback,"sim_monitor(17): _exit(int reason) to be coded\n");
+ sim_warning("sim_monitor(17): _exit(int reason) to be coded");
state |= (simSTOP | simEXIT); /* stop executing code */
rcexit = (unsigned int)(A0 & 0xFFFFFFFF);
break;
failed = -1;
if (failed)
- callback->printf_filtered(callback,"WARNING: Invalid pointer passed into monitor call\n");
+ sim_error("Invalid pointer passed into monitor call");
}
break;
/* A2 = optional argument 2 */
/* A3 = optional argument 3 */
/* out: void */
+ /* The following is based on the PMON printf source */
{
uword64 paddr;
int cca;
- if (AddressTranslation(A0,isDATA,isLOAD,&paddr,&cca,isHOST,isREAL))
- callback->printf_filtered(callback,(char *)((int)paddr),(int)A1,(int)A2,(int)A2);
- else
- callback->printf_filtered(callback,"WARNING: Attempt to pass pointer that does not reference simulated memory\n");
+ /* This isn't the quickest way, since we call the host print
+ routine for every character almost. But it does avoid
+ having to allocate and manage a temporary string buffer. */
+ if (AddressTranslation(A0,isDATA,isLOAD,&paddr,&cca,isHOST,isREAL)) {
+ char *s = (char *)((int)paddr);
+ ut_reg *ap = &A1; /* 1st argument */
+ /* TODO: Include check that we only use three arguments (A1, A2 and A3) */
+ for (; *s;) {
+ if (*s == '%') {
+ char tmp[40];
+ enum {FMT_RJUST, FMT_LJUST, FMT_RJUST0, FMT_CENTER} fmt = FMT_RJUST;
+ int width = 0, trunc = 0, haddot = 0, longlong = 0;
+ int base = 10;
+ s++;
+ for (; *s; s++) {
+ if (strchr ("dobxXulscefg%", *s))
+ break;
+ else if (*s == '-')
+ fmt = FMT_LJUST;
+ else if (*s == '0')
+ fmt = FMT_RJUST0;
+ else if (*s == '~')
+ fmt = FMT_CENTER;
+ else if (*s == '*') {
+ if (haddot)
+ trunc = (int)*ap++;
+ else
+ width = (int)*ap++;
+ } else if (*s >= '1' && *s <= '9') {
+ char *t;
+ unsigned int n;
+ for (t = s; isdigit (*s); s++);
+ strncpy (tmp, t, s - t);
+ tmp[s - t] = '\0';
+ n = (unsigned int)strtol(tmp,NULL,10);
+ if (haddot)
+ trunc = n;
+ else
+ width = n;
+ s--;
+ } else if (*s == '.')
+ haddot = 1;
+ }
+ if (*s == '%') {
+ callback->printf_filtered(callback,"%%");
+ } else if (*s == 's') {
+ if ((int)*ap != 0) {
+ if (AddressTranslation(*ap++,isDATA,isLOAD,&paddr,&cca,isHOST,isREAL)) {
+ char *p = (char *)((int)paddr);;
+ callback->printf_filtered(callback,p);
+ } else {
+ ap++;
+ sim_error("Attempt to pass pointer that does not reference simulated memory");
+ }
+ }
+ else
+ callback->printf_filtered(callback,"(null)");
+ } else if (*s == 'c') {
+ int n = (int)*ap++;
+ callback->printf_filtered(callback,"%c",n);
+ } else {
+ if (*s == 'l') {
+ if (*++s == 'l') {
+ longlong = 1;
+ ++s;
+ }
+ }
+ if (strchr ("dobxXu", *s)) {
+ long long lv = (long long)*ap++;
+ if (*s == 'b')
+ callback->printf_filtered(callback,"<binary not supported>");
+ else {
+ sprintf(tmp,"%%%s%c",longlong ? "ll" : "",*s);
+ if (longlong)
+ callback->printf_filtered(callback,tmp,lv);
+ else
+ callback->printf_filtered(callback,tmp,(int)lv);
+ }
+ } else if (strchr ("eEfgG", *s)) {
+ double dbl = (double)*ap++;
+ sprintf(tmp,"%%%d.%d%c",width,trunc,*s);
+ callback->printf_filtered(callback,tmp,dbl);
+ trunc = 0;
+ }
+ }
+ s++;
+ } else
+ callback->printf_filtered(callback,"%c",*s++);
+ }
+ } else
+ sim_error("Attempt to pass pointer that does not reference simulated memory");
}
break;
default:
- callback->printf_filtered(callback,"TODO: sim_monitor(%d) : PC = 0x%08X%08X\n",reason,WORD64HI(IPC),WORD64LO(IPC));
- callback->printf_filtered(callback,"(Arguments : A0 = 0x%08X%08X : A1 = 0x%08X%08X : A2 = 0x%08X%08X : A3 = 0x%08X%08X)\n",WORD64HI(A0),WORD64LO(A0),WORD64HI(A1),WORD64LO(A1),WORD64HI(A2),WORD64LO(A2),WORD64HI(A3),WORD64LO(A3));
+ sim_warning("TODO: sim_monitor(%d) : PC = 0x%08X%08X",reason,WORD64HI(IPC),WORD64LO(IPC));
+ sim_warning("(Arguments : A0 = 0x%08X%08X : A1 = 0x%08X%08X : A2 = 0x%08X%08X : A3 = 0x%08X%08X)",WORD64HI(A0),WORD64LO(A0),WORD64HI(A1),WORD64LO(A1),WORD64HI(A2),WORD64LO(A2),WORD64HI(A3),WORD64LO(A3));
break;
}
return;
}
+void
+sim_warning(fmt)
+ char *fmt;
+{
+ va_list ap;
+ va_start(ap,fmt);
+ if (logfh != NULL) {
+#if 1
+ fprintf(logfh,"SIM Warning: ");
+ fprintf(logfh,fmt,ap);
+ fprintf(logfh,"\n");
+#else /* we should provide a method of routing log messages to the simulator output stream */
+ callback->printf_filtered(callback,"SIM Warning: ");
+ callback->printf_filtered(callback,fmt,ap);
+#endif
+ }
+ va_end(ap);
+ SignalException(SimulatorFault,"");
+ return;
+}
+
void
sim_error(fmt)
char *fmt;
*pAddr = (int)&monitor[((unsigned int)(vAddr - monitor_base) & (monitor_size - 1))];
} else {
#if 1 /* def DEBUG */
- callback->printf_filtered(callback,"Failed: AddressTranslation(0x%08X%08X,%s,%s,...) IPC = 0x%08X%08X\n",WORD64HI(vAddr),WORD64LO(vAddr),(IorD ? "isDATA" : "isINSTRUCTION"),(LorS ? "isSTORE" : "isLOAD"),WORD64HI(IPC),WORD64LO(IPC));
+ sim_warning("Failed: AddressTranslation(0x%08X%08X,%s,%s,...) IPC = 0x%08X%08X",WORD64HI(vAddr),WORD64LO(vAddr),(IorD ? "isDATA" : "isINSTRUCTION"),(LorS ? "isSTORE" : "isLOAD"),WORD64HI(IPC),WORD64LO(IPC));
#endif /* DEBUG */
res = 0; /* AddressTranslation has failed */
*pAddr = -1;
if (!raw) /* only generate exceptions on real memory transfers */
SignalException((LorS == isSTORE) ? AddressStore : AddressLoad);
else
- callback->printf_filtered(callback,"AddressTranslation for %s %s from 0x%08X%08X failed\n",(IorD ? "data" : "instruction"),(LorS ? "store" : "load"),WORD64HI(vAddr),WORD64LO(vAddr));
+ sim_warning("AddressTranslation for %s %s from 0x%08X%08X failed",(IorD ? "data" : "instruction"),(LorS ? "store" : "load"),WORD64HI(vAddr),WORD64LO(vAddr));
}
return(res);
#if defined(WARN_MEM)
if (CCA != uncached)
- callback->printf_filtered(callback,"SIM Warning: LoadMemory CCA (%d) is not uncached (currently all accesses treated as cached)\n",CCA);
+ sim_warning("LoadMemory CCA (%d) is not uncached (currently all accesses treated as cached)",CCA);
if (((pAddr & LOADDRMASK) + AccessLength) > LOADDRMASK) {
/* In reality this should be a Bus Error */
- sim_error("AccessLength of %d would extend over 64bit aligned boundary for physical address 0x%08X%08X\n",AccessLength,WORD64HI(pAddr),WORD64LO(pAddr));
+ sim_error("AccessLength of %d would extend over %dbit aligned boundary for physical address 0x%08X%08X\n",AccessLength,(LOADDRMASK + 1)<<2,WORD64HI(pAddr),WORD64LO(pAddr));
}
#endif /* WARN_MEM */
#if defined(WARN_MEM)
if (CCA != uncached)
- callback->printf_filtered(callback,"SIM Warning: StoreMemory CCA (%d) is not uncached (currently all accesses treated as cached)\n",CCA);
+ sim_warning("StoreMemory CCA (%d) is not uncached (currently all accesses treated as cached)",CCA);
if (((pAddr & LOADDRMASK) + AccessLength) > LOADDRMASK)
- sim_error("AccessLength of %d would extend over 64bit aligned boundary for physical address 0x%08X%08X\n",AccessLength,WORD64HI(pAddr),WORD64LO(pAddr));
+ sim_error("AccessLength of %d would extend over %dbit aligned boundary for physical address 0x%08X%08X\n",AccessLength,(LOADDRMASK + 1)<<2,WORD64HI(pAddr),WORD64LO(pAddr));
#endif /* WARN_MEM */
#if defined(TRACE)
reality we should either simulate them, or allow the user to
ignore them at run-time. */
case Trap :
- callback->printf_filtered(callback,"Ignoring instruction TRAP (PC 0x%08X%08X)\n",WORD64HI(IPC),WORD64LO(IPC));
+ sim_warning("Ignoring instruction TRAP (PC 0x%08X%08X)",WORD64HI(IPC),WORD64LO(IPC));
break;
case ReservedInstruction :
case with the current IDT monitor). */
break; /* out of the switch statement */
} /* else fall through to normal exception processing */
- callback->printf_filtered(callback,"DBG: ReservedInstruction 0x%08X at IPC = 0x%08X%08X\n",instruction,WORD64HI(IPC),WORD64LO(IPC));
+ sim_warning("ReservedInstruction 0x%08X at IPC = 0x%08X%08X",instruction,WORD64HI(IPC),WORD64LO(IPC));
}
default:
#if 1 /* def DEBUG */
- callback->printf_filtered(callback,"DBG: SignalException(%d) IPC = 0x%08X%08X\n",exception,WORD64HI(IPC),WORD64LO(IPC));
+ if (exception != BreakPoint)
+ callback->printf_filtered(callback,"DBG: SignalException(%d) IPC = 0x%08X%08X\n",exception,WORD64HI(IPC),WORD64LO(IPC));
#endif /* DEBUG */
/* Store exception code into current exception id variable (used
by exit code): */
/* TODO: If not simulating exceptions then stop the simulator
execution. At the moment we always stop the simulation. */
+#if 1 /* bodge to allow exit() code to be returned, by assuming that a breakpoint exception after a monitor exit() call should be silent */
+/* further bodged since the standard libgloss/mips world doesn't use the _exit() monitor call, it just uses a break instruction */
+ if (exception == BreakPoint /* && state & simEXIT */)
+ {
+ state |= simSTOP;
+#if 1 /* since the _exit() monitor call may not be called */
+ state |= simEXIT;
+ rcexit = (unsigned int)(A0 & 0xFFFFFFFF);
+#endif
+ }
+ else
+ state |= (simSTOP | simEXCEPTION);
+#else
state |= (simSTOP | simEXCEPTION);
+#endif
CAUSE = (exception << 2);
if (state & simDELAYSLOT) {
CAUSE |= cause_BD;
static void
UndefinedResult()
{
- callback->printf_filtered(callback,"UndefinedResult: IPC = 0x%08X%08X\n",WORD64HI(IPC),WORD64LO(IPC));
+ sim_warning("UndefinedResult: IPC = 0x%08X%08X",WORD64HI(IPC),WORD64LO(IPC));
#if 0 /* Disabled for the moment, since it actually happens a lot at the moment. */
state |= simSTOP;
#endif
uword64 vAddr;
unsigned int instruction;
{
+#if 1 /* stop warning message being displayed (we should really just remove the code) */
+ static int icache_warning = 1;
+ static int dcache_warning = 1;
+#else
static int icache_warning = 0;
static int dcache_warning = 0;
+#endif
/* If CP0 is not useable (User or Supervisor mode) and the CP0
enable bit in the Status Register is clear - a coprocessor
case 6: /* Hit Writeback */
if (!icache_warning)
{
- callback->printf_filtered(callback,"SIM Warning: Instruction CACHE operation %d to be coded\n",(op >> 2));
+ sim_warning("Instruction CACHE operation %d to be coded",(op >> 2));
icache_warning = 1;
}
break;
case 6: /* Hit Writeback */
if (!dcache_warning)
{
- callback->printf_filtered(callback,"SIM Warning: Data CACHE operation %d to be coded\n",(op >> 2));
+ sim_warning("Data CACHE operation %d to be coded",(op >> 2));
dcache_warning = 1;
}
break;
#endif /* DEBUG */
}
if (fmt != fpr_state[fpr]) {
- callback->printf_filtered(callback,"Warning: FPR %d (format %s) being accessed with format %s - setting to unknown (PC = 0x%08X%08X)\n",fpr,DOFMT(fpr_state[fpr]),DOFMT(fmt),WORD64HI(IPC),WORD64LO(IPC));
+ sim_warning("FPR %d (format %s) being accessed with format %s - setting to unknown (PC = 0x%08X%08X)",fpr,DOFMT(fpr_state[fpr]),DOFMT(fmt),WORD64HI(IPC),WORD64LO(IPC));
fpr_state[fpr] = fmt_unknown;
}
case fmt_uninterpreted:
case fmt_double:
case fmt_long:
- value = ((FGR[fpr+1] << 32) | (FGR[fpr] & 0xFFFFFFFF));
+ value = ((((uword64)FGR[fpr+1]) << 32) | (FGR[fpr] & 0xFFFFFFFF));
break;
default :
/* Round result to nearest representable value. When two
representable values are equally near, round to the value
that has a least significant bit of zero (i.e. is even). */
-#if defined(sun)
+#ifdef HAVE_ANINT
tmp = (float)anint((double)tmp);
#else
/* TODO: Provide round-to-nearest */
case FP_RM_TOZERO:
/* Round result to the value closest to, and not greater in
magnitude than, the result. */
-#if defined(sun)
+#ifdef HAVE_AINT
tmp = (float)aint((double)tmp);
#else
/* TODO: Provide round-to-zero */
case fmt_double:
{
double tmp;
+ word64 xxx;
switch (from) {
case fmt_single:
break;
case fmt_word:
- tmp = (double)((word64)SIGNEXTEND((op & 0xFFFFFFFF),32));
+ xxx = SIGNEXTEND((op & 0xFFFFFFFF),32);
+ tmp = xxx;
break;
case fmt_long:
switch (rm) {
case FP_RM_NEAREST:
-#if defined(sun)
+#ifdef HAVE_ANINT
tmp = anint(*(double *)&tmp);
#else
/* TODO: Provide round-to-nearest */
break;
case FP_RM_TOZERO:
-#if defined(sun)
+#ifdef HAVE_AINT
tmp = aint(*(double *)&tmp);
#else
/* TODO: Provide round-to-zero */
#endif /* HASFPU */
default:
+#if 0 /* this should be controlled by a configuration option */
callback->printf_filtered(callback,"COP_LW(%d,%d,0x%08X) at IPC = 0x%08X%08X : TODO (architecture specific)\n",coproc_num,coproc_reg,memword,WORD64HI(IPC),WORD64LO(IPC));
+#endif
break;
}
#endif /* HASFPU */
default:
+#if 0 /* this message should be controlled by a configuration option */
callback->printf_filtered(callback,"COP_LD(%d,%d,0x%08X%08X) at IPC = 0x%08X%08X : TODO (architecture specific)\n",coproc_num,coproc_reg,WORD64HI(memword),WORD64LO(memword),WORD64HI(IPC),WORD64LO(IPC));
+#endif
break;
}
#endif /* HASFPU */
default:
+#if 0 /* should be controlled by configuration option */
callback->printf_filtered(callback,"COP_SW(%d,%d) at IPC = 0x%08X%08X : TODO (architecture specific)\n",coproc_num,coproc_reg,WORD64HI(IPC),WORD64LO(IPC));
+#endif
break;
}
#endif /* HASFPU */
default:
+#if 0 /* should be controlled by configuration option */
callback->printf_filtered(callback,"COP_SD(%d,%d) at IPC = 0x%08X%08X : TODO (architecture specific)\n",coproc_num,coproc_reg,WORD64HI(IPC),WORD64LO(IPC));
+#endif
break;
}
int rt = ((instruction >> 16) & 0x1F);
int rd = ((instruction >> 11) & 0x1F);
if (code == 0x00) { /* MF : move from */
+#if 0 /* message should be controlled by configuration option */
callback->printf_filtered(callback,"Warning: MFC0 %d,%d not handled yet (architecture specific)\n",rt,rd);
+#endif
GPR[rt] = 0xDEADC0DE; /* CPR[0,rd] */
} else { /* MT : move to */
/* CPR[0,rd] = GPR[rt]; */
+#if 0 /* should be controlled by configuration option */
callback->printf_filtered(callback,"Warning: MTC0 %d,%d not handled yet (architecture specific)\n",rt,rd);
+#endif
}
} else
- callback->printf_filtered(callback,"Warning: Unrecognised COP0 instruction 0x%08X at IPC = 0x%08X%08X : No handler present\n",instruction,WORD64HI(IPC),WORD64LO(IPC));
+ sim_warning("Unrecognised COP0 instruction 0x%08X at IPC = 0x%08X%08X : No handler present",instruction,WORD64HI(IPC),WORD64LO(IPC));
/* TODO: When executing an ERET or RFE instruction we should
clear LLBIT, to ensure that any out-standing atomic
read/modify/write sequence fails. */
break;
case 2: /* undefined co-processor */
- callback->printf_filtered(callback,"Warning: COP2 instruction 0x%08X at IPC = 0x%08X%08X : No handler present\n",instruction,WORD64HI(IPC),WORD64LO(IPC));
+ sim_warning("COP2 instruction 0x%08X at IPC = 0x%08X%08X : No handler present",instruction,WORD64HI(IPC),WORD64LO(IPC));
break;
case 1: /* should not occur (FPU co-processor) */
#endif /* DEBUG */
if (AddressTranslation(PC,isINSTRUCTION,isLOAD,&paddr,&cca,isTARGET,isREAL)) { /* Copy the action of the LW instruction */
- unsigned int reverse = (ReverseEndian ? 1 : 0);
- unsigned int bigend = (BigEndianCPU ? 1 : 0);
+ unsigned int reverse = (ReverseEndian ? (LOADDRMASK >> 2) : 0);
+ unsigned int bigend = (BigEndianCPU ? (LOADDRMASK >> 2) : 0);
uword64 value;
unsigned int byte;
- paddr = ((paddr & ~0x7) | ((paddr & 0x7) ^ (reverse << 2)));
+ paddr = ((paddr & ~LOADDRMASK) | ((paddr & LOADDRMASK) ^ (reverse << 2)));
value = LoadMemory(cca,AccessLength_WORD,paddr,vaddr,isINSTRUCTION,isREAL);
- byte = ((vaddr & 0x7) ^ (bigend << 2));
+ byte = ((vaddr & LOADDRMASK) ^ (bigend << 2));
instruction = ((value >> (8 * byte)) & 0xFFFFFFFF);
} else {
fprintf(stderr,"Cannot translate address for PC = 0x%08X%08X failed\n",WORD64HI(PC),WORD64LO(PC));
if (!(state & simSKIPNEXT)) {
/* Include the simulator engine */
#include "engine.c"
-#if ((GPRLEN == 64) && !defined(PROCESSOR_64BIT)) || ((GPRLEN == 32) && defined(PROCESSOR_64BIT))
+#if ((GPRLEN == 64) && !PROCESSOR_64BIT) || ((GPRLEN == 32) && PROCESSOR_64BIT)
#error "Mismatch between run-time simulator code and simulation engine"
#endif
than within the simulator, since it will help keep the simulator
small. */
if (ZERO != 0) {
- callback->printf_filtered(callback,"SIM Warning: The ZERO register has been updated with 0x%08X%08X (PC = 0x%08X%08X)\nSIM Warning: Resetting back to zero\n",WORD64HI(ZERO),WORD64LO(ZERO),WORD64HI(IPC),WORD64LO(IPC));
+ sim_warning("The ZERO register has been updated with 0x%08X%08X (PC = 0x%08X%08X) (reset back to zero)",WORD64HI(ZERO),WORD64LO(ZERO),WORD64HI(IPC),WORD64LO(IPC));
ZERO = 0; /* reset back to zero before next instruction */
}
#endif /* WARN_ZERO */