#include <signal.h>
+
+#include "sim-main.h"
+#include "sim-options.h"
+#include "sim-hw.h"
+
#include "sysdep.h"
#include "bfd.h"
+#include "sim-assert.h"
+
+
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#ifdef HAVE_STRING_H
+#include <string.h>
+#else
+#ifdef HAVE_STRINGS_H
+#include <strings.h>
+#endif
+#endif
-#include "mn10300_sim.h"
+#include "bfd.h"
#ifndef INLINE
#ifdef __GNUC__
#endif
#endif
+
host_callback *mn10300_callback;
int mn10300_debug;
-static SIM_OPEN_KIND sim_kind;
-static char *myname;
+struct _state State;
-static void dispatch PARAMS ((uint32, uint32, int));
-static long hash PARAMS ((long));
-static void init_system PARAMS ((void));
-#define MAX_HASH 127
-struct hash_entry
-{
- struct hash_entry *next;
- long opcode;
- long mask;
- struct simops *ops;
-#ifdef HASH_STAT
- unsigned long count;
-#endif
-};
+/* simulation target board. NULL=default configuration */
+static char* board = NULL;
-static int max_mem = 0;
-struct hash_entry hash_table[MAX_HASH+1];
+static DECLARE_OPTION_HANDLER (mn10300_option_handler);
+enum {
+ OPTION_BOARD = OPTION_START,
+};
-/* This probably doesn't do a very good job at bucket filling, but
- it's simple... */
-static INLINE long
-hash(insn)
- long insn;
+static SIM_RC
+mn10300_option_handler (SIM_DESC sd,
+ sim_cpu *cpu,
+ int opt,
+ char *arg,
+ int is_command)
{
- /* These are one byte insns, we special case these since, in theory,
- they should be the most heavily used. */
- if ((insn & 0xffffff00) == 0)
+ int cpu_nr;
+ switch (opt)
{
- switch (insn & 0xf0)
- {
- case 0x00:
- return 0x70;
-
- case 0x40:
- return 0x71;
-
- case 0x10:
- return 0x72;
-
- case 0x30:
- return 0x73;
-
- case 0x50:
- return 0x74;
-
- case 0x60:
- return 0x75;
-
- case 0x70:
- return 0x76;
+ case OPTION_BOARD:
+ {
+ if (arg)
+ {
+ board = zalloc(strlen(arg) + 1);
+ strcpy(board, arg);
+ }
+ return SIM_RC_OK;
+ }
+ }
+
+ return SIM_RC_OK;
+}
- case 0x80:
- return 0x77;
+static const OPTION mn10300_options[] =
+{
+#define BOARD_AM32 "stdeval1"
+ { {"board", required_argument, NULL, OPTION_BOARD},
+ '\0', "none" /* rely on compile-time string concatenation for other options */
+ "|" BOARD_AM32
+ , "Customize simulation for a particular board.", mn10300_option_handler },
- case 0x90:
- return 0x78;
+ { {NULL, no_argument, NULL, 0}, '\0', NULL, NULL, NULL }
+};
- case 0xa0:
- return 0x79;
+/* For compatibility */
+SIM_DESC simulator;
- case 0xb0:
- return 0x7a;
+/* These default values correspond to expected usage for the chip. */
- case 0xe0:
- return 0x7b;
+SIM_DESC
+sim_open (SIM_OPEN_KIND kind,
+ host_callback *cb,
+ struct bfd *abfd,
+ char **argv)
+{
+ SIM_DESC sd = sim_state_alloc (kind, cb);
+ mn10300_callback = cb;
+
+ SIM_ASSERT (STATE_MAGIC (sd) == SIM_MAGIC_NUMBER);
+
+ /* for compatibility */
+ simulator = sd;
+
+ /* FIXME: should be better way of setting up interrupts. For
+ moment, only support watchpoints causing a breakpoint (gdb
+ halt). */
+ STATE_WATCHPOINTS (sd)->pc = &(PC);
+ STATE_WATCHPOINTS (sd)->sizeof_pc = sizeof (PC);
+ STATE_WATCHPOINTS (sd)->interrupt_handler = NULL;
+ STATE_WATCHPOINTS (sd)->interrupt_names = NULL;
+
+ if (sim_pre_argv_init (sd, argv[0]) != SIM_RC_OK)
+ return 0;
+ sim_add_option_table (sd, NULL, mn10300_options);
+
+ /* Allocate core managed memory */
+ sim_do_command (sd, "memory region 0,0x100000");
+ sim_do_command (sd, "memory region 0x40000000,0x200000");
+
+ /* getopt will print the error message so we just have to exit if this fails.
+ FIXME: Hmmm... in the case of gdb we need getopt to call
+ print_filtered. */
+ if (sim_parse_args (sd, argv) != SIM_RC_OK)
+ {
+ /* Uninstall the modules to avoid memory leaks,
+ file descriptor leaks, etc. */
+ sim_module_uninstall (sd);
+ return 0;
+ }
- default:
- return 0x7c;
+ if ( NULL != board
+ && (strcmp(board, BOARD_AM32) == 0 ) )
+ {
+ /* environment */
+ STATE_ENVIRONMENT (sd) = OPERATING_ENVIRONMENT;
+
+ sim_do_command (sd, "memory region 0x44000000,0x40000");
+ sim_do_command (sd, "memory region 0x48000000,0x400000");
+
+ /* device support for mn1030002 */
+ /* interrupt controller */
+
+ sim_hw_parse (sd, "/mn103int@0x34000100/reg 0x34000100 0x7C 0x34000200 0x8 0x34000280 0x8");
+
+ /* DEBUG: NMI input's */
+ sim_hw_parse (sd, "/glue@0x30000000/reg 0x30000000 12");
+ sim_hw_parse (sd, "/glue@0x30000000 > int0 nmirq /mn103int");
+ sim_hw_parse (sd, "/glue@0x30000000 > int1 watchdog /mn103int");
+ sim_hw_parse (sd, "/glue@0x30000000 > int2 syserr /mn103int");
+
+ /* DEBUG: ACK input */
+ sim_hw_parse (sd, "/glue@0x30002000/reg 0x30002000 4");
+ sim_hw_parse (sd, "/glue@0x30002000 > int ack /mn103int");
+
+ /* DEBUG: LEVEL output */
+ sim_hw_parse (sd, "/glue@0x30004000/reg 0x30004000 8");
+ sim_hw_parse (sd, "/mn103int > nmi int0 /glue@0x30004000");
+ sim_hw_parse (sd, "/mn103int > level int1 /glue@0x30004000");
+
+ /* DEBUG: A bunch of interrupt inputs */
+ sim_hw_parse (sd, "/glue@0x30006000/reg 0x30006000 32");
+ sim_hw_parse (sd, "/glue@0x30006000 > int0 irq-0 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int1 irq-1 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int2 irq-2 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int3 irq-3 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int4 irq-4 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int5 irq-5 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int6 irq-6 /mn103int");
+ sim_hw_parse (sd, "/glue@0x30006000 > int7 irq-7 /mn103int");
+
+ /* processor interrupt device */
+
+ /* the device */
+ sim_hw_parse (sd, "/mn103cpu@0x20000000");
+ sim_hw_parse (sd, "/mn103cpu@0x20000000/reg 0x20000000 0x42");
+
+ /* DEBUG: ACK output wired upto a glue device */
+ sim_hw_parse (sd, "/glue@0x20002000");
+ sim_hw_parse (sd, "/glue@0x20002000/reg 0x20002000 4");
+ sim_hw_parse (sd, "/mn103cpu > ack int0 /glue@0x20002000");
+
+ /* DEBUG: RESET/NMI/LEVEL wired up to a glue device */
+ sim_hw_parse (sd, "/glue@0x20004000");
+ sim_hw_parse (sd, "/glue@0x20004000/reg 0x20004000 12");
+ sim_hw_parse (sd, "/glue@0x20004000 > int0 reset /mn103cpu");
+ sim_hw_parse (sd, "/glue@0x20004000 > int1 nmi /mn103cpu");
+ sim_hw_parse (sd, "/glue@0x20004000 > int2 level /mn103cpu");
+
+ /* REAL: The processor wired up to the real interrupt controller */
+ sim_hw_parse (sd, "/mn103cpu > ack ack /mn103int");
+ sim_hw_parse (sd, "/mn103int > level level /mn103cpu");
+ sim_hw_parse (sd, "/mn103int > nmi nmi /mn103cpu");
+
+
+ /* PAL */
+
+ /* the device */
+ sim_hw_parse (sd, "/pal@0x31000000");
+ sim_hw_parse (sd, "/pal@0x31000000/reg 0x31000000 64");
+ sim_hw_parse (sd, "/pal@0x31000000/poll? true");
+
+ /* DEBUG: PAL wired up to a glue device */
+ sim_hw_parse (sd, "/glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000/reg 0x31002000 16");
+ sim_hw_parse (sd, "/pal@0x31000000 > countdown int0 /glue@0x31002000");
+ sim_hw_parse (sd, "/pal@0x31000000 > timer int1 /glue@0x31002000");
+ sim_hw_parse (sd, "/pal@0x31000000 > int int2 /glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000 > int0 int3 /glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000 > int1 int3 /glue@0x31002000");
+ sim_hw_parse (sd, "/glue@0x31002000 > int2 int3 /glue@0x31002000");
+
+ /* REAL: The PAL wired up to the real interrupt controller */
+ sim_hw_parse (sd, "/pal@0x31000000 > countdown irq-0 /mn103int");
+ sim_hw_parse (sd, "/pal@0x31000000 > timer irq-1 /mn103int");
+ sim_hw_parse (sd, "/pal@0x31000000 > int irq-2 /mn103int");
+
+ /* 8 and 16 bit timers */
+ sim_hw_parse (sd, "/mn103tim@0x34001000/reg 0x34001000 36 0x34001080 100 0x34004000 16");
+
+ /* Hook timer interrupts up to interrupt controller */
+ sim_hw_parse (sd, "/mn103tim > timer-0-underflow timer-0-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-1-underflow timer-1-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-2-underflow timer-2-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-3-underflow timer-3-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-4-underflow timer-4-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-5-underflow timer-5-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-6-underflow timer-6-underflow /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-6-compare-a timer-6-compare-a /mn103int");
+ sim_hw_parse (sd, "/mn103tim > timer-6-compare-b timer-6-compare-b /mn103int");
+
+
+ /* Serial devices 0,1,2 */
+ sim_hw_parse (sd, "/mn103ser@0x34000800/reg 0x34000800 48");
+ sim_hw_parse (sd, "/mn103ser@0x34000800/poll? true");
+
+ /* Hook serial interrupts up to interrupt controller */
+ sim_hw_parse (sd, "/mn103ser > serial-0-receive serial-0-receive /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-0-transmit serial-0-transmit /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-1-receive serial-1-receive /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-1-transmit serial-1-transmit /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-2-receive serial-2-receive /mn103int");
+ sim_hw_parse (sd, "/mn103ser > serial-2-transmit serial-2-transmit /mn103int");
+
+ sim_hw_parse (sd, "/mn103iop@0x36008000/reg 0x36008000 8 0x36008020 8 0x36008040 0xc 0x36008060 8 0x36008080 8");
+
+ /* Memory control registers */
+ sim_do_command (sd, "memory region 0x32000020,0x30");
+ /* Cache control register */
+ sim_do_command (sd, "memory region 0x20000070,0x4");
+ /* Cache purge regions */
+ sim_do_command (sd, "memory region 0x28400000,0x800");
+ sim_do_command (sd, "memory region 0x28401000,0x800");
+ /* DMA registers */
+ sim_do_command (sd, "memory region 0x32000100,0xF");
+ sim_do_command (sd, "memory region 0x32000200,0xF");
+ sim_do_command (sd, "memory region 0x32000400,0xF");
+ sim_do_command (sd, "memory region 0x32000800,0xF");
+ }
+ else
+ {
+ if (board != NULL)
+ {
+ sim_io_eprintf (sd, "Error: Board `%s' unknown.\n", board);
+ return 0;
}
}
-
- /* These are two byte insns */
- if ((insn & 0xffff0000) == 0)
+
+
+
+ /* check for/establish the a reference program image */
+ if (sim_analyze_program (sd,
+ (STATE_PROG_ARGV (sd) != NULL
+ ? *STATE_PROG_ARGV (sd)
+ : NULL),
+ abfd) != SIM_RC_OK)
{
- if ((insn & 0xf000) == 0x2000
- || (insn & 0xf000) == 0x5000)
- return ((insn & 0xfc00) >> 8) & 0x7f;
-
- if ((insn & 0xf000) == 0x4000)
- return ((insn & 0xf300) >> 8) & 0x7f;
-
- if ((insn & 0xf000) == 0x8000
- || (insn & 0xf000) == 0x9000
- || (insn & 0xf000) == 0xa000
- || (insn & 0xf000) == 0xb000)
- return ((insn & 0xf000) >> 8) & 0x7f;
-
- if ((insn & 0xff00) == 0xf000
- || (insn & 0xff00) == 0xf100
- || (insn & 0xff00) == 0xf200
- || (insn & 0xff00) == 0xf500
- || (insn & 0xff00) == 0xf600)
- return ((insn & 0xfff0) >> 4) & 0x7f;
-
- if ((insn & 0xf000) == 0xc000)
- return ((insn & 0xff00) >> 8) & 0x7f;
+ sim_module_uninstall (sd);
+ return 0;
+ }
- return ((insn & 0xffc0) >> 6) & 0x7f;
+ /* establish any remaining configuration options */
+ if (sim_config (sd) != SIM_RC_OK)
+ {
+ sim_module_uninstall (sd);
+ return 0;
}
- /* These are three byte insns. */
- if ((insn & 0xff000000) == 0)
+ if (sim_post_argv_init (sd) != SIM_RC_OK)
{
- if ((insn & 0xf00000) == 0x000000)
- return ((insn & 0xf30000) >> 16) & 0x7f;
+ /* Uninstall the modules to avoid memory leaks,
+ file descriptor leaks, etc. */
+ sim_module_uninstall (sd);
+ return 0;
+ }
- if ((insn & 0xf00000) == 0x200000
- || (insn & 0xf00000) == 0x300000)
- return ((insn & 0xfc0000) >> 16) & 0x7f;
- if ((insn & 0xff0000) == 0xf80000)
- return ((insn & 0xfff000) >> 12) & 0x7f;
+ /* set machine specific configuration */
+/* STATE_CPU (sd, 0)->psw_mask = (PSW_NP | PSW_EP | PSW_ID | PSW_SAT */
+/* | PSW_CY | PSW_OV | PSW_S | PSW_Z); */
- if ((insn & 0xff0000) == 0xf90000)
- return ((insn & 0xfffc00) >> 10) & 0x7f;
+ return sd;
+}
- return ((insn & 0xff0000) >> 16) & 0x7f;
- }
- /* These are four byte or larger insns. */
- if ((insn & 0xf0000000) == 0xf0000000)
- return ((insn & 0xfff00000) >> 20) & 0x7f;
+void
+sim_close (SIM_DESC sd, int quitting)
+{
+ sim_module_uninstall (sd);
+}
+
- return ((insn & 0xff000000) >> 24) & 0x7f;
+SIM_RC
+sim_create_inferior (SIM_DESC sd,
+ struct bfd *prog_bfd,
+ char **argv,
+ char **env)
+{
+ memset (&State, 0, sizeof (State));
+ if (prog_bfd != NULL) {
+ PC = bfd_get_start_address (prog_bfd);
+ } else {
+ PC = 0;
+ }
+ CIA_SET (STATE_CPU (sd, 0), (unsigned64) PC);
+
+ return SIM_RC_OK;
}
-static void
-dispatch (insn, extension, length)
- uint32 insn;
- uint32 extension;
- int length;
+void
+sim_do_command (SIM_DESC sd, char *cmd)
{
- struct hash_entry *h;
-
- h = &hash_table[hash(insn)];
+ char *mm_cmd = "memory-map";
+ char *int_cmd = "interrupt";
- while ((insn & h->mask) != h->opcode
- || (length != h->ops->length))
+ if (sim_args_command (sd, cmd) != SIM_RC_OK)
{
- if (!h->next)
- {
- (*mn10300_callback->printf_filtered) (mn10300_callback,
- "ERROR looking up hash for 0x%x, PC=0x%x\n", insn, PC);
- exit(1);
- }
- h = h->next;
+ if (strncmp (cmd, mm_cmd, strlen (mm_cmd) == 0))
+ sim_io_eprintf (sd, "`memory-map' command replaced by `sim memory'\n");
+ else if (strncmp (cmd, int_cmd, strlen (int_cmd)) == 0)
+ sim_io_eprintf (sd, "`interrupt' command replaced by `sim watch'\n");
+ else
+ sim_io_eprintf (sd, "Unknown command `%s'\n", cmd);
}
-
-
-#ifdef HASH_STAT
- h->count++;
-#endif
-
- /* Now call the right function. */
- (h->ops->func)(insn, extension);
- PC += length;
}
/* FIXME These would more efficient to use than load_mem/store_mem,
but need to be changed to use the memory map. */
uint8
-get_byte (x)
- uint8 *x;
+get_byte (uint8 *x)
{
return *x;
}
uint16
-get_half (x)
- uint8 *x;
+get_half (uint8 *x)
{
uint8 *a = x;
return (a[1] << 8) + (a[0]);
}
uint32
-get_word (x)
- uint8 *x;
+get_word (uint8 *x)
{
uint8 *a = x;
return (a[3]<<24) + (a[2]<<16) + (a[1]<<8) + (a[0]);
}
void
-put_byte (addr, data)
- uint8 *addr;
- uint8 data;
+put_byte (uint8 *addr, uint8 data)
{
uint8 *a = addr;
a[0] = data;
}
void
-put_half (addr, data)
- uint8 *addr;
- uint16 data;
+put_half (uint8 *addr, uint16 data)
{
uint8 *a = addr;
a[0] = data & 0xff;
}
void
-put_word (addr, data)
- uint8 *addr;
- uint32 data;
+put_word (uint8 *addr, uint32 data)
{
uint8 *a = addr;
a[0] = data & 0xff;
a[3] = (data >> 24) & 0xff;
}
-
-uint32
-load_mem_big (addr, len)
- SIM_ADDR addr;
- int len;
+int
+sim_fetch_register (SIM_DESC sd,
+ int rn,
+ unsigned char *memory,
+ int length)
{
- uint8 *p = addr + State.mem;
-
- if (addr > max_mem)
- abort ();
-
- switch (len)
- {
- case 1:
- return p[0];
- case 2:
- return p[0] << 8 | p[1];
- case 3:
- return p[0] << 16 | p[1] << 8 | p[2];
- case 4:
- return p[0] << 24 | p[1] << 16 | p[2] << 8 | p[3];
- default:
- abort ();
- }
+ put_word (memory, State.regs[rn]);
+ return -1;
}
-
-uint32
-load_mem (addr, len)
- SIM_ADDR addr;
- int len;
+
+int
+sim_store_register (SIM_DESC sd,
+ int rn,
+ unsigned char *memory,
+ int length)
{
- uint8 *p = addr + State.mem;
-
- if (addr > max_mem)
- abort ();
-
- switch (len)
- {
- case 1:
- return p[0];
- case 2:
- return p[1] << 8 | p[0];
- case 3:
- return p[2] << 16 | p[1] << 8 | p[0];
- case 4:
- return p[3] << 24 | p[2] << 16 | p[1] << 8 | p[0];
- default:
- abort ();
- }
+ State.regs[rn] = get_word (memory);
+ return -1;
}
-void
-store_mem (addr, len, data)
- SIM_ADDR addr;
- int len;
- uint32 data;
-{
- uint8 *p = addr + State.mem;
-
- if (addr > max_mem)
- abort ();
-
- switch (len)
- {
- case 1:
- p[0] = data;
- return;
- case 2:
- p[0] = data;
- p[1] = data >> 8;
- return;
- case 4:
- p[0] = data;
- p[1] = data >> 8;
- p[2] = data >> 16;
- p[3] = data >> 24;
- return;
- default:
- abort ();
- }
-}
void
-sim_size (power)
- int power;
-
-{
- if (State.mem)
- free (State.mem);
-
- max_mem = 1 << power;
- State.mem = (uint8 *) calloc (1, 1 << power);
- if (!State.mem)
+mn10300_core_signal (SIM_DESC sd,
+ sim_cpu *cpu,
+ sim_cia cia,
+ unsigned map,
+ int nr_bytes,
+ address_word addr,
+ transfer_type transfer,
+ sim_core_signals sig)
+{
+ const char *copy = (transfer == read_transfer ? "read" : "write");
+ address_word ip = CIA_ADDR (cia);
+
+ switch (sig)
{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "Allocation of main memory failed.\n");
- exit (1);
- }
-}
+ case sim_core_unmapped_signal:
+ sim_io_eprintf (sd, "mn10300-core: %d byte %s to unmapped address 0x%lx at 0x%lx\n",
+ nr_bytes, copy,
+ (unsigned long) addr, (unsigned long) ip);
+ program_interrupt(sd, cpu, cia, SIM_SIGSEGV);
+ break;
+
+ case sim_core_unaligned_signal:
+ sim_io_eprintf (sd, "mn10300-core: %d byte %s to unaligned address 0x%lx at 0x%lx\n",
+ nr_bytes, copy,
+ (unsigned long) addr, (unsigned long) ip);
+ program_interrupt(sd, cpu, cia, SIM_SIGBUS);
+ break;
-static void
-init_system ()
-{
- if (!State.mem)
- sim_size(19);
+ default:
+ sim_engine_abort (sd, cpu, cia,
+ "mn10300_core_signal - internal error - bad switch");
+ }
}
-int
-sim_write (sd, addr, buffer, size)
- SIM_DESC sd;
- SIM_ADDR addr;
- unsigned char *buffer;
- int size;
-{
- int i;
-
- init_system ();
-
- for (i = 0; i < size; i++)
- store_mem (addr + i, 1, buffer[i]);
-
- return size;
-}
-SIM_DESC
-sim_open (kind,argv)
- SIM_OPEN_KIND kind;
- char **argv;
+void
+program_interrupt (SIM_DESC sd,
+ sim_cpu *cpu,
+ sim_cia cia,
+ SIM_SIGNAL sig)
{
- struct simops *s;
- struct hash_entry *h;
- char **p;
+ int status;
+ struct hw *device;
+ static int in_interrupt = 0;
- sim_kind = kind;
- myname = argv[0];
-
- for (p = argv + 1; *p; ++p)
- {
- if (strcmp (*p, "-E") == 0)
- ++p; /* ignore endian spec */
- else
-#ifdef DEBUG
- if (strcmp (*p, "-t") == 0)
- mn10300_debug = DEBUG;
- else
+#ifdef SIM_CPU_EXCEPTION_TRIGGER
+ SIM_CPU_EXCEPTION_TRIGGER(sd,cpu,cia);
#endif
- (*mn10300_callback->printf_filtered) (mn10300_callback, "ERROR: unsupported option(s): %s\n",*p);
- }
- /* put all the opcodes in the hash table */
- for (s = Simops; s->func; s++)
+ /* avoid infinite recursion */
+ if (in_interrupt)
{
- h = &hash_table[hash(s->opcode)];
-
- /* go to the last entry in the chain */
- while (h->next)
- {
- /* Don't insert the same opcode more than once. */
- if (h->opcode == s->opcode
- && h->mask == s->mask
- && h->ops == s)
- continue;
- else
- h = h->next;
- }
-
- /* Don't insert the same opcode more than once. */
- if (h->opcode == s->opcode
- && h->mask == s->mask
- && h->ops == s)
- continue;
-
- if (h->ops)
- {
- h->next = calloc(1,sizeof(struct hash_entry));
- h = h->next;
- }
- h->ops = s;
- h->mask = s->mask;
- h->opcode = s->opcode;
-#if HASH_STAT
- h->count = 0;
-#endif
+ (*mn10300_callback->printf_filtered) (mn10300_callback,
+ "ERROR: recursion in program_interrupt during software exception dispatch.");
}
-
-
- /* fudge our descriptor for now */
- return (SIM_DESC) 1;
-}
-
-
-void
-sim_close (sd, quitting)
- SIM_DESC sd;
- int quitting;
-{
- /* nothing to do */
-}
-
-void
-sim_set_profile (n)
- int n;
-{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "sim_set_profile %d\n", n);
-}
-
-void
-sim_set_profile_size (n)
- int n;
-{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "sim_set_profile_size %d\n", n);
-}
-
-int
-sim_stop (sd)
- SIM_DESC sd;
-{
- return 0;
-}
-
-void
-sim_resume (sd, step, siggnal)
- SIM_DESC sd;
- int step, siggnal;
-{
- uint32 inst;
- reg_t oldpc;
- struct hash_entry *h;
-
- if (step)
- State.exception = SIGTRAP;
else
- State.exception = 0;
-
- do
{
- unsigned long insn, extension;
-
- /* Fetch the current instruction. */
- inst = load_mem_big (PC, 2);
- oldpc = PC;
-
- /* Using a giant case statement may seem like a waste because of the
- code/rodata size the table itself will consume. However, using
- a giant case statement speeds up the simulator by 10-15% by avoiding
- cascading if/else statements or cascading case statements. */
-
- switch ((inst >> 8) & 0xff)
- {
- /* All the single byte insns except 0x80, 0x90, 0xa0, 0xb0
- which must be handled specially. */
- case 0x00:
- case 0x04:
- case 0x08:
- case 0x0c:
- case 0x11:
- case 0x12:
- case 0x13:
- case 0x14:
- case 0x15:
- case 0x16:
- case 0x17:
- case 0x18:
- case 0x19:
- case 0x1a:
- case 0x1b:
- case 0x1c:
- case 0x1d:
- case 0x1e:
- case 0x1f:
- case 0x3c:
- case 0x3d:
- case 0x3e:
- case 0x3f:
- case 0x40:
- case 0x41:
- case 0x44:
- case 0x45:
- case 0x48:
- case 0x49:
- case 0x4c:
- case 0x4d:
- case 0x50:
- case 0x51:
- case 0x52:
- case 0x53:
- case 0x54:
- case 0x55:
- case 0x56:
- case 0x57:
- case 0x60:
- case 0x61:
- case 0x62:
- case 0x63:
- case 0x64:
- case 0x65:
- case 0x66:
- case 0x67:
- case 0x68:
- case 0x69:
- case 0x6a:
- case 0x6b:
- case 0x6c:
- case 0x6d:
- case 0x6e:
- case 0x6f:
- case 0x70:
- case 0x71:
- case 0x72:
- case 0x73:
- case 0x74:
- case 0x75:
- case 0x76:
- case 0x77:
- case 0x78:
- case 0x79:
- case 0x7a:
- case 0x7b:
- case 0x7c:
- case 0x7d:
- case 0x7e:
- case 0x7f:
- case 0xcb:
- case 0xd0:
- case 0xd1:
- case 0xd2:
- case 0xd3:
- case 0xd4:
- case 0xd5:
- case 0xd6:
- case 0xd7:
- case 0xd8:
- case 0xd9:
- case 0xda:
- case 0xdb:
- case 0xe0:
- case 0xe1:
- case 0xe2:
- case 0xe3:
- case 0xe4:
- case 0xe5:
- case 0xe6:
- case 0xe7:
- case 0xe8:
- case 0xe9:
- case 0xea:
- case 0xeb:
- case 0xec:
- case 0xed:
- case 0xee:
- case 0xef:
- case 0xff:
- insn = (inst >> 8) & 0xff;
- extension = 0;
- dispatch (insn, extension, 1);
- break;
-
- /* Special cases where dm == dn is used to encode a different
- instruction. */
- case 0x80:
- case 0x85:
- case 0x8a:
- case 0x8f:
- case 0x90:
- case 0x95:
- case 0x9a:
- case 0x9f:
- case 0xa0:
- case 0xa5:
- case 0xaa:
- case 0xaf:
- case 0xb0:
- case 0xb5:
- case 0xba:
- case 0xbf:
- insn = inst;
- extension = 0;
- dispatch (insn, extension, 2);
- break;
-
- case 0x81:
- case 0x82:
- case 0x83:
- case 0x84:
- case 0x86:
- case 0x87:
- case 0x88:
- case 0x89:
- case 0x8b:
- case 0x8c:
- case 0x8d:
- case 0x8e:
- case 0x91:
- case 0x92:
- case 0x93:
- case 0x94:
- case 0x96:
- case 0x97:
- case 0x98:
- case 0x99:
- case 0x9b:
- case 0x9c:
- case 0x9d:
- case 0x9e:
- case 0xa1:
- case 0xa2:
- case 0xa3:
- case 0xa4:
- case 0xa6:
- case 0xa7:
- case 0xa8:
- case 0xa9:
- case 0xab:
- case 0xac:
- case 0xad:
- case 0xae:
- case 0xb1:
- case 0xb2:
- case 0xb3:
- case 0xb4:
- case 0xb6:
- case 0xb7:
- case 0xb8:
- case 0xb9:
- case 0xbb:
- case 0xbc:
- case 0xbd:
- case 0xbe:
- insn = (inst >> 8) & 0xff;
- extension = 0;
- dispatch (insn, extension, 1);
- break;
-
- /* The two byte instructions. */
- case 0x20:
- case 0x21:
- case 0x22:
- case 0x23:
- case 0x28:
- case 0x29:
- case 0x2a:
- case 0x2b:
- case 0x42:
- case 0x43:
- case 0x46:
- case 0x47:
- case 0x4a:
- case 0x4b:
- case 0x4e:
- case 0x4f:
- case 0x58:
- case 0x59:
- case 0x5a:
- case 0x5b:
- case 0x5c:
- case 0x5d:
- case 0x5e:
- case 0x5f:
- case 0xc0:
- case 0xc1:
- case 0xc2:
- case 0xc3:
- case 0xc4:
- case 0xc5:
- case 0xc6:
- case 0xc7:
- case 0xc8:
- case 0xc9:
- case 0xca:
- case 0xce:
- case 0xcf:
- case 0xf0:
- case 0xf1:
- case 0xf2:
- case 0xf3:
- case 0xf4:
- case 0xf5:
- case 0xf6:
- insn = inst;
- extension = 0;
- dispatch (insn, extension, 2);
- break;
-
- /* The three byte insns with a 16bit operand in little endian
- format. */
- case 0x01:
- case 0x02:
- case 0x03:
- case 0x05:
- case 0x06:
- case 0x07:
- case 0x09:
- case 0x0a:
- case 0x0b:
- case 0x0d:
- case 0x0e:
- case 0x0f:
- case 0x24:
- case 0x25:
- case 0x26:
- case 0x27:
- case 0x2c:
- case 0x2d:
- case 0x2e:
- case 0x2f:
- case 0x30:
- case 0x31:
- case 0x32:
- case 0x33:
- case 0x34:
- case 0x35:
- case 0x36:
- case 0x37:
- case 0x38:
- case 0x39:
- case 0x3a:
- case 0x3b:
- case 0xcc:
- insn = load_mem (PC, 1);
- insn <<= 16;
- insn |= load_mem (PC + 1, 2);
- extension = 0;
- dispatch (insn, extension, 3);
- break;
-
- /* The three byte insns without 16bit operand. */
- case 0xde:
- case 0xdf:
- case 0xf8:
- case 0xf9:
- insn = load_mem_big (PC, 3);
- extension = 0;
- dispatch (insn, extension, 3);
- break;
-
- /* Four byte insns. */
- case 0xfa:
- case 0xfb:
- if ((inst & 0xfffc) == 0xfaf0
- || (inst & 0xfffc) == 0xfaf4
- || (inst & 0xfffc) == 0xfaf8)
- insn = load_mem_big (PC, 4);
- else
- {
- insn = inst;
- insn <<= 16;
- insn |= load_mem (PC + 2, 2);
- extension = 0;
- }
- dispatch (insn, extension, 4);
- break;
-
- /* Five byte insns. */
- case 0xcd:
- insn = load_mem (PC, 1);
- insn <<= 24;
- insn |= (load_mem (PC + 1, 2) << 8);
- insn |= load_mem (PC + 3, 1);
- extension = load_mem (PC + 4, 1);
- dispatch (insn, extension, 5);
- break;
-
- case 0xdc:
- insn = load_mem (PC, 1);
- insn <<= 24;
- extension = load_mem (PC + 1, 4);
- insn |= (extension & 0xffffff00) >> 8;
- extension &= 0xff;
- dispatch (insn, extension, 5);
- break;
-
- /* Six byte insns. */
- case 0xfc:
- case 0xfd:
- insn = (inst << 16);
- extension = load_mem (PC + 2, 4);
- insn |= ((extension & 0xffff0000) >> 16);
- extension &= 0xffff;
- dispatch (insn, extension, 6);
- break;
-
- case 0xdd:
- insn = load_mem (PC, 1) << 24;
- extension = load_mem (PC + 1, 4);
- insn |= ((extension >> 8) & 0xffffff);
- extension = (extension & 0xff) << 16;
- extension |= load_mem (PC + 5, 1) << 8;
- extension |= load_mem (PC + 6, 1);
- dispatch (insn, extension, 7);
- break;
-
- case 0xfe:
- insn = inst << 16;
- extension = load_mem (PC + 2, 4);
- insn |= ((extension >> 16) & 0xffff);
- extension <<= 8;
- extension &= 0xffff00;
- extension |= load_mem (PC + 6, 1);
- dispatch (insn, extension, 7);
- break;
-
- default:
- abort ();
- }
+ in_interrupt = 1;
+ /* copy NMI handler code from dv-mn103cpu.c */
+ store_word (SP - 4, CIA_GET (cpu));
+ store_half (SP - 8, PSW);
+
+ /* Set the SYSEF flag in NMICR by backdoor method. See
+ dv-mn103int.c:write_icr(). This is necessary because
+ software exceptions are not modelled by actually talking to
+ the interrupt controller, so it cannot set its own SYSEF
+ flag. */
+ if ((NULL != board) && (strcmp(board, BOARD_AM32) == 0))
+ store_byte (0x34000103, 0x04);
}
- while (!State.exception);
-#ifdef HASH_STAT
- {
- int i;
- for (i = 0; i < MAX_HASH; i++)
- {
- struct hash_entry *h;
- h = &hash_table[i];
-
- printf("hash 0x%x:\n", i);
-
- while (h)
- {
- printf("h->opcode = 0x%x, count = 0x%x\n", h->opcode, h->count);
- h = h->next;
- }
-
- printf("\n\n");
- }
- fflush (stdout);
- }
-#endif
+ PSW &= ~PSW_IE;
+ SP = SP - 8;
+ CIA_SET (cpu, 0x40000008);
+ in_interrupt = 0;
+ sim_engine_halt(sd, cpu, NULL, cia, sim_stopped, sig);
}
-int
-sim_trace (sd)
- SIM_DESC sd;
-{
-#ifdef DEBUG
- mn10300_debug = DEBUG;
-#endif
- sim_resume (sd, 0, 0);
- return 1;
-}
void
-sim_info (sd, verbose)
- SIM_DESC sd;
- int verbose;
+mn10300_cpu_exception_trigger(SIM_DESC sd, sim_cpu* cpu, address_word cia)
{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "sim_info\n");
-}
+ ASSERT(cpu != NULL);
-SIM_RC
-sim_create_inferior (sd, argv, env)
- SIM_DESC sd;
- char **argv;
- char **env;
-{
- return SIM_RC_OK;
-}
+ if(State.exc_suspended > 0)
+ sim_io_eprintf(sd, "Warning, nested exception triggered (%d)\n", State.exc_suspended);
-void
-sim_kill (sd)
- SIM_DESC sd;
-{
- /* nothing to do */
+ CIA_SET (cpu, cia);
+ memcpy(State.exc_trigger_regs, State.regs, sizeof(State.exc_trigger_regs));
+ State.exc_suspended = 0;
}
void
-sim_set_callbacks (sd, p)
- SIM_DESC sd;
- host_callback *p;
+mn10300_cpu_exception_suspend(SIM_DESC sd, sim_cpu* cpu, int exception)
{
- mn10300_callback = p;
-}
+ ASSERT(cpu != NULL);
-/* All the code for exiting, signals, etc needs to be revamped.
+ if(State.exc_suspended > 0)
+ sim_io_eprintf(sd, "Warning, nested exception signal (%d then %d)\n",
+ State.exc_suspended, exception);
- This is enough to get c-torture limping though. */
-
-void
-sim_stop_reason (sd, reason, sigrc)
- SIM_DESC sd;
- enum sim_stop *reason;
- int *sigrc;
-{
- *reason = sim_stopped;
- if (State.exception == SIGQUIT)
- *sigrc = 0;
- else
- *sigrc = State.exception;
+ memcpy(State.exc_suspend_regs, State.regs, sizeof(State.exc_suspend_regs));
+ memcpy(State.regs, State.exc_trigger_regs, sizeof(State.regs));
+ CIA_SET (cpu, PC); /* copy PC back from new State.regs */
+ State.exc_suspended = exception;
}
void
-sim_fetch_register (sd, rn, memory)
- SIM_DESC sd;
- int rn;
- unsigned char *memory;
+mn10300_cpu_exception_resume(SIM_DESC sd, sim_cpu* cpu, int exception)
{
- put_word (memory, State.regs[rn]);
-}
-
-void
-sim_store_register (sd, rn, memory)
- SIM_DESC sd;
- int rn;
- unsigned char *memory;
-{
- State.regs[rn] = get_word (memory);
-}
+ ASSERT(cpu != NULL);
-int
-sim_read (sd, addr, buffer, size)
- SIM_DESC sd;
- SIM_ADDR addr;
- unsigned char *buffer;
- int size;
-{
- int i;
- for (i = 0; i < size; i++)
- buffer[i] = load_mem (addr + i, 1);
-
- return size;
-}
-
-void
-sim_do_command (sd, cmd)
- SIM_DESC sd;
- char *cmd;
-{
- (*mn10300_callback->printf_filtered) (mn10300_callback, "\"%s\" is not a valid mn10300 simulator command.\n", cmd);
+ if(exception == 0 && State.exc_suspended > 0)
+ {
+ if(State.exc_suspended != SIGTRAP) /* warn not for breakpoints */
+ sim_io_eprintf(sd, "Warning, resuming but ignoring pending exception signal (%d)\n",
+ State.exc_suspended);
+ }
+ else if(exception != 0 && State.exc_suspended > 0)
+ {
+ if(exception != State.exc_suspended)
+ sim_io_eprintf(sd, "Warning, resuming with mismatched exception signal (%d vs %d)\n",
+ State.exc_suspended, exception);
+
+ memcpy(State.regs, State.exc_suspend_regs, sizeof(State.regs));
+ CIA_SET (cpu, PC); /* copy PC back from new State.regs */
+ }
+ else if(exception != 0 && State.exc_suspended == 0)
+ {
+ sim_io_eprintf(sd, "Warning, ignoring spontanous exception signal (%d)\n", exception);
+ }
+ State.exc_suspended = 0;
}
-
-SIM_RC
-sim_load (sd, prog, abfd, from_tty)
- SIM_DESC sd;
- char *prog;
- bfd *abfd;
- int from_tty;
-{
- extern bfd *sim_load_file (); /* ??? Don't know where this should live. */
- bfd *prog_bfd;
-
- prog_bfd = sim_load_file (sd, myname, mn10300_callback, prog, abfd,
- sim_kind == SIM_OPEN_DEBUG);
- if (prog_bfd == NULL)
- return SIM_RC_FAIL;
- PC = bfd_get_start_address (prog_bfd);
- if (abfd == NULL)
- bfd_close (prog_bfd);
- return SIM_RC_OK;
-}