dnl Process this file with autoconf to produce a configure script.
-sinclude(../common/aclocal.m4)
AC_PREREQ(2.59)dnl
AC_INIT(Makefile.in)
+sinclude(../common/acinclude.m4)
AC_PROG_INSTALL
AC_PROG_CC
dnl We don't use gettext, but bfd does. So we do the appropriate checks
dnl to see if there are intl libraries we should link against.
ALL_LINGUAS=
-CY_GNU_GETTEXT
+ZW_GNU_GETTEXT_SISTER_DIR(../../intl)
AC_ARG_ENABLE(sim-alignment,
fi],[sim_bitsize=""])dnl
-AC_ARG_ENABLE(sim-bswap,
-[ --enable-sim-bswap Use the BSWAP instruction on Intel 486s and Pentiums.],
-[case "${enableval}" in
- yes) sim_bswap="-DWITH_BSWAP=1";;
- no) sim_bswap="-DWITH_BSWAP=0";;
- *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";;
-esac
-if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then
- echo "Setting bswap flags = $sim_bswap" 6>&1
-fi],[sim_bswap=""])dnl
-
-
-AC_ARG_ENABLE(sim-cflags,
-[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator],
-[case "${enableval}" in
- yes) sim_cflags="-O2 -fomit-frame-pointer";;
- no) sim_cflags="";;
- *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;;
-esac
-if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then
- echo "Setting sim cflags = $sim_cflags" 6>&1
-fi],[sim_cflags=""])dnl
-
-
AC_ARG_ENABLE(sim-config,
[ --enable-sim-config=file Override default config file],
[case "${enableval}" in
esac
])dnl
+AC_CACHE_CHECK([if union semun defined],
+ ac_cv_HAS_UNION_SEMUN,
+ [AC_TRY_COMPILE([
+#include <sys/types.h>
+#include <sys/ipc.h>
+#include <sys/sem.h>],
+[union semun arg ;],
+[ac_cv_has_union_semun="yes"],
+[ac_cv_has_union_semun="no"])
+AC_MSG_RESULT($ac_cv_has_union_semun)
+])
+
+
+if test "$ac_cv_has_union_semun" = "yes"; then
+ AC_CACHE_CHECK(whether System V semaphores are supported,
+ ac_cv_sysv_sem,
+ [
+ AC_TRY_RUN(
+ [
+ #include <sys/types.h>
+ #include <sys/ipc.h>
+ #include <sys/sem.h>
+ int main () {
+ union semun arg ;
+
+ int id=semget(IPC_PRIVATE,1,IPC_CREAT|0400);
+ if (id == -1)
+ exit(1);
+ arg.val = 0; /* avoid implicit type cast to union */
+ if (semctl(id, 0, IPC_RMID, arg) == -1)
+ exit(1);
+ exit(0);
+ }
+ ],
+ ac_cv_sysv_sem="yes", ac_cv_sysv_sem="no", :)
+ ])
+else # semun is not defined
+ AC_CACHE_CHECK(whether System V semaphores are supported,
+ ac_cv_sysv_sem,
+ [
+ AC_TRY_RUN(
+ [
+ #include <sys/types.h>
+ #include <sys/ipc.h>
+ #include <sys/sem.h>
+ union semun {
+ int val;
+ struct semid_ds *buf;
+ ushort *array;
+ };
+ int main () {
+ union semun arg ;
+
+ int id=semget(IPC_PRIVATE,1,IPC_CREAT|0400);
+ if (id == -1)
+ exit(1);
+ arg.val = 0; /* avoid implicit type cast to union */
+ if (semctl(id, 0, IPC_RMID, arg) == -1)
+ exit(1);
+ exit(0);
+ }
+ ],
+ ac_cv_sysv_sem="yes", ac_cv_sysv_sem="no", :)
+ ])
+fi
+
+AC_CACHE_CHECK(whether System V shared memory is supported,
+ac_cv_sysv_shm,
+[
+AC_TRY_RUN([
+#include <sys/types.h>
+#include <sys/ipc.h>
+#include <sys/shm.h>
+int main () {
+ int id=shmget(IPC_PRIVATE,1,IPC_CREAT|0400);
+ if (id == -1)
+ exit(1);
+ if (shmctl(id, IPC_RMID, 0) == -1)
+ exit(1);
+ exit(0);
+}
+],
+ac_cv_sysv_shm="yes", ac_cv_sysv_shm="no", :)
+])
+
+if test x"$ac_cv_sysv_shm" = x"yes" -a x"$ac_cv_sysv_sem" = x"yes" ; then
+ sim_sysv_ipc_hw=",sem,shm";
+else
+ sim_sysv_ipc_hw="";
+fi
+
+if test x"$ac_cv_has_union_semun" = x"yes" -a x"$ac_cv_sysv_sem" = x"yes" ; then
+ AC_DEFINE(HAVE_UNION_SEMUN, 1,
+ [Define if union semun is defined in <sys/sem.h>])
+fi
+
AC_ARG_ENABLE(sim-hardware,
[ --enable-sim-hardware=list Specify the hardware to be included in the build.],
-[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
+[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide${sim_sysv_ipc_hw}"
case "${enableval}" in
yes) ;;
no) AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";;
sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
if test x"$silent" != x"yes" && test x"$hardware" != x""; then
echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
-fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide"
+fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com,eeprom,opic,glue,phb,ide${sim_sysv_ipc_hw}"
sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'`
sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'`
if test x"$silent" != x"yes"; then
echo "Setting hardware to $sim_hw_src, $sim_hw_obj"
fi])dnl
-
AC_ARG_ENABLE(sim-hostbitsize,
[ --enable-sim-hostbitsize=32|64 Specify host bitsize (32 or 64).],
[case "${enableval}" in
fi],[sim_xor_endian=""])dnl
+ACX_PKGVERSION([GDB])
+ACX_BUGURL([http://www.gnu.org/software/gdb/bugs/])
+AC_DEFINE_UNQUOTED([PKGVERSION], ["$PKGVERSION"], [Additional package description])
+AC_DEFINE_UNQUOTED([REPORT_BUGS_TO], ["$REPORT_BUGS_TO"], [Bug reporting address])
+
AC_CANONICAL_SYSTEM
AC_ARG_PROGRAM
+# BFD conditionally uses zlib, so we must link it in if libbfd does, by
+# using the same condition.
+AM_ZLIB
+
+# BFD uses libdl when when plugins enabled.
+AC_PLUGINS
+
. ${srcdir}/../../bfd/configure.host
case ${host} in
sim_fpu=
fi
+# Since we run commands on the build system, we have to create a
+# separate config header for the build system if build != host.
+if test x$host = x$build; then
+ AC_CONFIG_COMMANDS([build-config.h],[cp config.h build-config.h])
+else
+ tempdir=build.$$
+ rm -rf $tempdir
+ mkdir $tempdir
+ cd $tempdir
+ case ${srcdir} in
+ /* | [A-Za-z]:[\\/]* ) realsrcdir=${srcdir};;
+ *) realsrcdir=../${srcdir};;
+ esac
+ saved_CFLAGS="${CFLAGS}"
+ CC="${CC_FOR_BUILD}" CFLAGS="${CFLAGS_FOR_BUILD}" \
+ LDFLAGS="${LDFLAGS_FOR_BUILD}" \
+ ${realsrcdir}/configure \
+ --enable-languages=${enable_languages-all} \
+ --target=$target_alias --host=$build_alias --build=$build_alias
+ CFLAGS="${saved_CFLAGS}"
+ mv config.h ../build-config.h
+ cd ..
+ rm -rf $tempdir
+fi
+
dnl Check for exe extension
AC_EXEEXT
AR=${AR-ar}
AC_SUBST(AR)
AC_PROG_RANLIB
-AC_SUBST(sim_cflags)
AC_SUBST(sim_warnings)
AC_SUBST(sim_line_nr)
AC_SUBST(sim_config)
AC_SUBST(sim_pk_src)
AC_SUBST(sim_pk_obj)
AC_SUBST(sim_inline)
-AC_SUBST(sim_bswap)
AC_SUBST(sim_endian)
AC_SUBST(sim_regparm)
AC_SUBST(sim_stdcall)
projects / deliverable / binutils-gdb.git / blobdiff