This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ along with this program; if not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _HW_EEPROM_C_
#define _HW_EEPROM_C_
-#ifndef STATIC_INLINE_HW_EEPROM
-#define STATIC_INLINE_HW_EEPROM STATIC_INLINE
-#endif
-
#include "device_table.h"
#ifdef HAVE_STRING_H
#endif
#endif
-/* EEPROM - electricaly erasable programable memory
- Description:
+/* DEVICE
+
+
+ eeprom - JEDEC? compatible electricaly erasable programable device
+
+
+ DESCRIPTION
+
This device implements a small byte addressable EEPROM.
Programming is performed using the same write sequences as used by
- modern EEPROM components. Writes occure in real time, the device
- returning a progress value until the programing has been completed.
+ standard modern EEPROM components. Writes occure in real time, the
+ device returning a progress value until the programing has been
+ completed.
+
+ It is based on the AMD 29F040 component.
+
+
+ PROPERTIES
+
+
+ reg = <address> <size> (required)
+
+ Determine where the device lives in the parents address space.
+
+
+ nr-sectors = <integer> (required)
+
+ When erasing an entire sector is cleared at a time. This specifies
+ the number of sectors in the EEPROM component.
+
+
+ sector-size = <integer> (required)
+
+ The number of bytes in a sector. When erasing, memory chunks of
+ this size are cleared.
+
+ NOTE: The product nr-sectors * sector-size does not need to map the
+ size specified in the reg property. If the specified size is
+ smaller part of the eeprom will not be accessible while if it is
+ larger the addresses will wrap.
+
+
+ byte-write-delay = <integer> (required)
+
+ Number of clock ticks before the programming of a single byte
+ completes.
+
+
+ sector-start-delay = <integer> (required)
+
+ When erasing sectors, the number of clock ticks after the sector
+ has been specified that the actual erase process commences.
+
+
+ erase-delay = <intger> (required)
+
+ Number of clock ticks before an erase program completes
+
+
+ manufacture-code = <integer> (required)
+
+ The one byte value returned when the auto-select manufacturer code
+ is read.
+
+
+ device-code = <integer> (required)
+
+ The one byte value returned when the auto-select device code is
+ read.
+
+
+ input-file = <file-name> (optional)
+
+ Initialize the eeprom using the specified binary file.
+
+
+ output-file = <file-name> (optional)
- Properties:
+ When ever the eeprom is updated, save the modified image into the
+ specified file.
- reg = <address> <size>. Determine where the device lives in the
- parents address space.
- nr-sectors = <integer>. When erasing an entire sector is cleared
- at a time. This specifies the number of sectors in the EEPROM
- component.
+ EXAMPLES
- byte-write-delay = <integer>. Number of clock ticks before the
- programming of a single byte completes.
- sector-start-delay = <integer>. When erasing sectors, the number
- of clock ticks after the sector has been specified and the actual
- erase process commences.
+ Enable tracing of the eeprom:
- erase-delay = <intger>. Number of clock ticks before an erase
- program completes. */
+ | bash$ psim -t eeprom-device \
+
+
+ Configure something very like the Amd Am29F040 - 512byte EEPROM
+ (but a bit faster):
+
+ | -o '/eeprom@0xfff00000/reg 0xfff00000 0x80000' \
+ | -o '/eeprom@0xfff00000/nr-sectors 8' \
+ | -o '/eeprom@0xfff00000/sector-size 0x10000' \
+ | -o '/eeprom@0xfff00000/byte-write-delay 1000' \
+ | -o '/eeprom@0xfff00000/sector-start-delay 100' \
+ | -o '/eeprom@0xfff00000/erase-delay 1000' \
+ | -o '/eeprom@0xfff00000/manufacture-code 0x01' \
+ | -o '/eeprom@0xfff00000/device-code 0xa4' \
+
+
+ Initialize the eeprom from the file <</dev/zero>>:
+
+ | -o '/eeprom@0xfff00000/input-file /dev/zero'
+
+
+ BUGS
+
+
+ */
typedef enum {
read_reset,
write_nr_6,
byte_program,
byte_programming,
- chip_erase, chip_erasing,
- sector_erase, sector_erasing,
+ chip_erase,
+ sector_erase,
sector_erase_suspend,
- sector_erase_resume,
-} eeprom_states;
+ autoselect,
+} hw_eeprom_states;
-typedef struct _eeprom_device {
+static const char *
+state2a(hw_eeprom_states state)
+{
+ switch (state) {
+ case read_reset: return "read_reset";
+ case write_nr_2: return "write_nr_2";
+ case write_nr_3: return "write_nr_3";
+ case write_nr_4: return "write_nr_4";
+ case write_nr_5: return "write_nr_5";
+ case write_nr_6: return "write_nr_6";
+ case byte_program: return "byte_program";
+ case byte_programming: return "byte_programming";
+ case chip_erase: return "chip_erase";
+ case sector_erase: return "sector_erase";
+ case sector_erase_suspend: return "sector_erase_suspend";
+ case autoselect: return "autoselect";
+ }
+ return NULL;
+}
+
+typedef struct _hw_eeprom_device {
+ /* general */
+ hw_eeprom_states state;
unsigned8 *memory;
unsigned sizeof_memory;
- unsigned sector_size;
+ unsigned erase_delay;
+ signed64 program_start_time;
+ signed64 program_finish_time;
+ unsigned8 manufacture_code;
+ unsigned8 device_code;
+ unsigned8 toggle_bit;
+ /* initialization */
+ const char *input_file_name;
+ const char *output_file_name;
+ /* for sector and sector programming */
+ hw_eeprom_states sector_state;
+ unsigned8 *sectors;
unsigned nr_sectors;
- unsigned byte_write_delay;
+ unsigned sizeof_sector;
unsigned sector_start_delay;
- unsigned erase_delay;
- signed64 programme_start_time;
- unsigned program_byte_address;
- eeprom_states state;
-} eeprom_device;
-
-static void *
-eeprom_create(const char *name,
- const device_unit *unit_address,
- const char *args,
- device *parent)
-{
- eeprom_device *eeprom = ZALLOC(eeprom_device);
- return eeprom;
-}
+ unsigned sector_start_time;
+ /* byte and byte programming */
+ unsigned byte_write_delay;
+ unsigned_word byte_program_address;
+ unsigned8 byte_program_byte;
+} hw_eeprom_device;
-typedef struct _eeprom_reg_spec {
+typedef struct _hw_eeprom_reg_spec {
unsigned32 base;
unsigned32 size;
-} eeprom_reg_spec;
+} hw_eeprom_reg_spec;
static void
-eeprom_init_address(device *me,
- psim *system)
+hw_eeprom_init_data(device *me)
{
- eeprom_device *eeprom = (eeprom_device*)device_data(me);
- const device_property *reg = device_find_array_property(me, "reg");
- const eeprom_reg_spec *spec = reg->array;
- int nr_entries = reg->sizeof_array / sizeof(*spec);
+ hw_eeprom_device *eeprom = (hw_eeprom_device*)device_data(me);
+
+ /* have we any input or output files */
+ if (device_find_property(me, "input-file") != NULL)
+ eeprom->input_file_name = device_find_string_property(me, "input-file");
+ if (device_find_property(me, "output-file") != NULL)
+ eeprom->input_file_name = device_find_string_property(me, "output-file");
- if ((reg->sizeof_array % sizeof(*spec)) != 0)
- error("devices/%s reg property of incorrect size\n", device_name(me));
- if (nr_entries > 1)
- error("devices/%s reg property contains multiple specs\n",
- device_name(me));
+ /* figure out the sectors in the eeprom */
+ if (eeprom->sectors == NULL) {
+ eeprom->nr_sectors = device_find_integer_property(me, "nr-sectors");
+ eeprom->sizeof_sector = device_find_integer_property(me, "sector-size");
+ eeprom->sectors = zalloc(eeprom->nr_sectors);
+ }
+ else
+ memset(eeprom->sectors, 0, eeprom->nr_sectors);
/* initialize the eeprom */
if (eeprom->memory == NULL) {
- eeprom->sizeof_memory = BE2H_4(spec->size);
+ eeprom->sizeof_memory = eeprom->sizeof_sector * eeprom->nr_sectors;
eeprom->memory = zalloc(eeprom->sizeof_memory);
}
else
- memset(eeprom->memory, eeprom->sizeof_memory, 0);
-
- /* figure out the sectors in the eeprom */
- eeprom->nr_sectors = device_find_integer_property(me, "nr-sectors");
- eeprom->sector_size = eeprom->sizeof_memory / eeprom->nr_sectors;
- if (eeprom->sector_size * eeprom->nr_sectors != eeprom->sizeof_memory)
- error("device/%s nr-sectors does not evenly divide eeprom\n",
- device_name(me));
+ memset(eeprom->memory, 0, eeprom->sizeof_memory);
+ if (eeprom->input_file_name != NULL) {
+ int i;
+ FILE *input_file = fopen(eeprom->input_file_name, "r");
+ if (input_file == NULL) {
+ perror("eeprom");
+ device_error(me, "Failed to open input file %s\n", eeprom->input_file_name);
+ }
+ for (i = 0; i < eeprom->sizeof_memory; i++) {
+ if (fread(&eeprom->memory[i], 1, 1, input_file) != 1)
+ break;
+ }
+ fclose(input_file);
+ }
/* timing */
eeprom->byte_write_delay = device_find_integer_property(me, "byte-write-delay");
eeprom->sector_start_delay = device_find_integer_property(me, "sector-start-delay");
eeprom->erase_delay = device_find_integer_property(me, "erase-delay");
- device_attach_address(device_parent(me),
- device_name(me),
- attach_callback,
- 0 /*address space*/,
- BE2H_4(spec->base),
- eeprom->sizeof_memory,
- access_read_write_exec,
- me);
+ /* misc */
+ eeprom->manufacture_code = device_find_integer_property(me, "manufacture-code");
+ eeprom->device_code = device_find_integer_property(me, "device-code");
+}
+
+
+static void
+invalid_read(device *me,
+ hw_eeprom_states state,
+ unsigned_word address,
+ const char *reason)
+{
+ DTRACE(eeprom, ("Invalid read to 0x%lx while in state %s (%s)\n",
+ (unsigned long)address,
+ state2a(state),
+ reason));
}
+static void
+invalid_write(device *me,
+ hw_eeprom_states state,
+ unsigned_word address,
+ unsigned8 data,
+ const char *reason)
+{
+ DTRACE(eeprom, ("Invalid write of 0x%lx to 0x%lx while in state %s (%s)\n",
+ (unsigned long)data,
+ (unsigned long)address,
+ state2a(state),
+ reason));
+}
+static void
+dump_eeprom(device *me,
+ hw_eeprom_device *eeprom)
+{
+ if (eeprom->output_file_name != NULL) {
+ int i;
+ FILE *output_file = fopen(eeprom->output_file_name, "w");
+ if (output_file == NULL) {
+ perror("eeprom");
+ device_error(me, "Failed to open output file %s\n",
+ eeprom->output_file_name);
+ }
+ for (i = 0; i < eeprom->sizeof_memory; i++) {
+ if (fwrite(&eeprom->memory[i], 1, 1, output_file) != 1)
+ break;
+ }
+ fclose(output_file);
+ }
+}
+
+
+/* program a single byte of eeprom */
+
+static void
+start_programming_byte(device *me,
+ hw_eeprom_device *eeprom,
+ unsigned_word address,
+ unsigned8 new_byte)
+{
+ unsigned8 old_byte = eeprom->memory[address];
+ DTRACE(eeprom, ("start-programing-byte - address 0x%lx, new 0x%lx, old 0x%lx\n",
+ (unsigned long)address,
+ (unsigned long)new_byte,
+ (unsigned long)old_byte));
+ eeprom->byte_program_address = address;
+ /* : old new : ~old : new&~old
+ : 0 0 : 1 : 0
+ : 0 1 : 1 : 1 -- can not set a bit
+ : 1 0 : 0 : 0
+ : 1 1 : 0 : 0 */
+ if (~old_byte & new_byte)
+ invalid_write(me, eeprom->state, address, new_byte, "setting cleared bit");
+ /* : old new : old&new
+ : 0 0 : 0
+ : 0 1 : 0
+ : 1 0 : 0
+ : 1 1 : 1 */
+ eeprom->byte_program_byte = new_byte & old_byte;
+ eeprom->memory[address] = ~new_byte & ~0x24; /* LE-bits 5:3 zero */
+ eeprom->program_start_time = device_event_queue_time(me);
+ eeprom->program_finish_time = (eeprom->program_start_time
+ + eeprom->byte_write_delay);
+}
+
+static void
+finish_programming_byte(device *me,
+ hw_eeprom_device *eeprom)
+{
+ DTRACE(eeprom, ("finish-programming-byte - address 0x%lx, byte 0x%lx\n",
+ (unsigned long)eeprom->byte_program_address,
+ (unsigned long)eeprom->byte_program_byte));
+ eeprom->memory[eeprom->byte_program_address] = eeprom->byte_program_byte;
+ dump_eeprom(me, eeprom);
+}
+
+
+/* erase the eeprom completly */
+
+static void
+start_erasing_chip(device *me,
+ hw_eeprom_device *eeprom)
+{
+ DTRACE(eeprom, ("start-erasing-chip\n"));
+ memset(eeprom->memory, 0, eeprom->sizeof_memory);
+ eeprom->program_start_time = device_event_queue_time(me);
+ eeprom->program_finish_time = (eeprom->program_start_time
+ + eeprom->erase_delay);
+}
+
+static void
+finish_erasing_chip(device *me,
+ hw_eeprom_device *eeprom)
+{
+ DTRACE(eeprom, ("finish-erasing-chip\n"));
+ memset(eeprom->memory, 0xff, eeprom->sizeof_memory);
+ dump_eeprom(me, eeprom);
+}
+
+
+/* erase a single sector of the eeprom */
+
+static void
+start_erasing_sector(device *me,
+ hw_eeprom_device *eeprom,
+ unsigned_word address)
+{
+ int sector = address / eeprom->sizeof_sector;
+ DTRACE(eeprom, ("start-erasing-sector - address 0x%lx, sector %d\n",
+ (unsigned long)address, sector));
+ ASSERT(sector < eeprom->nr_sectors);
+ eeprom->sectors[sector] = 1;
+ memset(eeprom->memory + sector * eeprom->sizeof_sector,
+ 0x4, eeprom->sizeof_sector);
+ eeprom->program_start_time = device_event_queue_time(me);
+ eeprom->sector_start_time = (eeprom->program_start_time
+ + eeprom->sector_start_delay);
+ eeprom->program_finish_time = (eeprom->sector_start_time
+ + eeprom->erase_delay);
+
+}
+
+static void
+finish_erasing_sector(device *me,
+ hw_eeprom_device *eeprom)
+{
+ int sector;
+ DTRACE(eeprom, ("finish-erasing-sector\n"));
+ for (sector = 0; sector < eeprom->nr_sectors; sector++) {
+ if (eeprom->sectors[sector]) {
+ eeprom->sectors[sector] = 0;
+ memset(eeprom->memory + sector * eeprom->sizeof_sector,
+ 0xff, eeprom->sizeof_sector);
+ }
+ }
+ dump_eeprom(me, eeprom);
+}
+
+
+/* eeprom reads */
+
+static unsigned8
+toggle(hw_eeprom_device *eeprom,
+ unsigned8 byte)
+{
+ eeprom->toggle_bit = eeprom->toggle_bit ^ 0x40; /* le-bit 6 */
+ return eeprom->toggle_bit ^ byte;
+}
+
+static unsigned8
+read_byte(device *me,
+ hw_eeprom_device *eeprom,
+ unsigned_word address)
+{
+ /* may need multiple iterations of this */
+ while (1) {
+ switch (eeprom->state) {
+
+ case read_reset:
+ return eeprom->memory[address];
+
+ case autoselect:
+ if ((address & 0xff) == 0x00)
+ return eeprom->manufacture_code;
+ else if ((address & 0xff) == 0x01)
+ return eeprom->device_code;
+ else
+ return 0; /* not certain about this */
+
+ case byte_programming:
+ if (device_event_queue_time(me) > eeprom->program_finish_time) {
+ finish_programming_byte(me, eeprom);
+ eeprom->state = read_reset;
+ continue;
+ }
+ else if (address == eeprom->byte_program_address) {
+ return toggle(eeprom, eeprom->memory[address]);
+ }
+ else {
+ /* trash that memory location */
+ invalid_read(me, eeprom->state, address, "not byte program address");
+ eeprom->memory[address] = (eeprom->memory[address]
+ & eeprom->byte_program_byte);
+ return toggle(eeprom, eeprom->memory[eeprom->byte_program_address]);
+ }
+
+ case chip_erase:
+ if (device_event_queue_time(me) > eeprom->program_finish_time) {
+ finish_erasing_chip(me, eeprom);
+ eeprom->state = read_reset;
+ continue;
+ }
+ else {
+ return toggle(eeprom, eeprom->memory[address]);
+ }
+
+ case sector_erase:
+ if (device_event_queue_time(me) > eeprom->program_finish_time) {
+ finish_erasing_sector(me, eeprom);
+ eeprom->state = read_reset;
+ continue;
+ }
+ else if (!eeprom->sectors[address / eeprom->sizeof_sector]) {
+ /* read to wrong sector */
+ invalid_read(me, eeprom->state, address, "sector not being erased");
+ return toggle(eeprom, eeprom->memory[address]) & ~0x8;
+ }
+ else if (device_event_queue_time(me) > eeprom->sector_start_time) {
+ return toggle(eeprom, eeprom->memory[address]) | 0x8;
+ }
+ else {
+ return toggle(eeprom, eeprom->memory[address]) & ~0x8;
+ }
+
+ case sector_erase_suspend:
+ if (!eeprom->sectors[address / eeprom->sizeof_sector]) {
+ return eeprom->memory[address];
+ }
+ else {
+ invalid_read(me, eeprom->state, address, "sector being erased");
+ return eeprom->memory[address];
+ }
+
+ default:
+ invalid_read(me, eeprom->state, address, "invalid state");
+ return eeprom->memory[address];
+
+ }
+ }
+ return 0;
+}
+
static unsigned
-eeprom_io_read_buffer(device *me,
- void *dest,
- int space,
- unsigned_word addr,
- unsigned nr_bytes,
- cpu *processor,
- unsigned_word cia)
+hw_eeprom_io_read_buffer(device *me,
+ void *dest,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ cpu *processor,
+ unsigned_word cia)
{
- eeprom_device *eeprom = (eeprom_device*)device_data(me);
+ hw_eeprom_device *eeprom = (hw_eeprom_device*)device_data(me);
int i;
for (i = 0; i < nr_bytes; i++) {
- unsigned_word address = (addr + nr_bytes) % eeprom->sizeof_memory;
- eeprom->memory[address] = eeprom_io_read_byte(address);
+ unsigned_word address = (addr + i) % eeprom->sizeof_memory;
+ unsigned8 byte = read_byte(me, eeprom, address);
+ ((unsigned8*)dest)[i] = byte;
}
return nr_bytes;
}
+
+/* eeprom writes */
+
static void
-eeprom_io_write_byte()
+write_byte(device *me,
+ hw_eeprom_device *eeprom,
+ unsigned_word address,
+ unsigned8 data)
{
- switch (state) {
- case read_reset:
- if (address == 0x5555 && data = 0xaa)
- state = first_write;
- else
- state = read_reset;
- break;
- case first_write:
- if (address == 0x2aaa && data == 0x55)
- state = second_write;
- else
- state = read_reset; /* issue warning */
- break;
- case second_write:
- if (address == 0x5555 && data == 0xf0)
- state = read_reset;
- else if (address == 0x5555 && data == 0x90)
- state = auto_select;
- else if (address == 0x5555 && data == 0xa0)
- state = byte_program;
- else if (address == 0x5555 && data == 0x80)
- state = third_write;
- else
- state = read_reset;
- break;
- case fourth_write:
- if (address == 0x5555 && data == 0xaa)
- state = fith_write;
- else
- state = read_reset;
- break;
- case fith_write:
- if (address == 0x2aaa && data == 0x55)
- state = sixth_write;
- else
- state = read_reset;
- break;
- case sixth_write:
- if (address == 0x5555 && data == 0x10)
- state = chip_erase;
- else
- sector_erase();
- break;
- case auto_select:
- if (data == 0xf0)
- state = read_reset;
- else if (address == 0x5555 && data == 0xaa)
- state = second_write;
- else
- state = read_reset; /* issue warning */
- break;
- case sector_erase:
- if (data == 0xb0)
- state = sector_erase_suspend;
- else
- state = sector_erase; /* ignore */
- break;
- case sector_erase_suspend:
- if (data == 0x30)
- state = sector_erase;
- else
- state = sector_erase_suspend; /* ignore */
- break;
- case byte_program:
- /* perform the byte program */
- program_address = address;
- program_start = some_time();
- toggle = 0;
- /* but only make things `0' and never 1 */
- byte[address] = data;
- state = byte_programming;
- break;
- case byte_programming:
- if (finished)
- state = read_reset;
- else
- state = byte_programming;
- break;
+ /* may need multiple transitions to process a write */
+ while (1) {
+ switch (eeprom->state) {
+
+ case read_reset:
+ if (address == 0x5555 && data == 0xaa)
+ eeprom->state = write_nr_2;
+ else if (data == 0xf0)
+ eeprom->state = read_reset;
+ else {
+ invalid_write(me, eeprom->state, address, data, "unexpected");
+ eeprom->state = read_reset;
+ }
+ return;
+
+ case write_nr_2:
+ if (address == 0x2aaa && data == 0x55)
+ eeprom->state = write_nr_3;
+ else {
+ invalid_write(me, eeprom->state, address, data, "unexpected");
+ eeprom->state = read_reset;
+ }
+ return;
+
+ case write_nr_3:
+ if (address == 0x5555 && data == 0xf0)
+ eeprom->state = read_reset;
+ else if (address == 0x5555 && data == 0x90)
+ eeprom->state = autoselect;
+ else if (address == 0x5555 && data == 0xa0) {
+ eeprom->state = byte_program;
+ }
+ else if (address == 0x5555 && data == 0x80)
+ eeprom->state = write_nr_4;
+ else {
+ invalid_write(me, eeprom->state, address, data, "unexpected");
+ eeprom->state = read_reset;
+ }
+ return;
+
+ case write_nr_4:
+ if (address == 0x5555 && data == 0xaa)
+ eeprom->state = write_nr_5;
+ else {
+ invalid_write(me, eeprom->state, address, data, "unexpected");
+ eeprom->state = read_reset;
+ }
+ return;
+
+ case write_nr_5:
+ if (address == 0x2aaa && data == 0x55)
+ eeprom->state = write_nr_6;
+ else {
+ invalid_write(me, eeprom->state, address, data, "unexpected");
+ eeprom->state = read_reset;
+ }
+ return;
+
+ case write_nr_6:
+ if (address == 0x5555 && data == 0x10) {
+ start_erasing_chip(me, eeprom);
+ eeprom->state = chip_erase;
+ }
+ else {
+ start_erasing_sector(me, eeprom, address);
+ eeprom->sector_state = read_reset;
+ eeprom->state = sector_erase;
+ }
+ return;
+
+ case autoselect:
+ if (data == 0xf0)
+ eeprom->state = read_reset;
+ else if (address == 0x5555 && data == 0xaa)
+ eeprom->state = write_nr_2;
+ else {
+ invalid_write(me, eeprom->state, address, data, "unsupported address");
+ eeprom->state = read_reset;
+ }
+ return;
+
+ case byte_program:
+ start_programming_byte(me, eeprom, address, data);
+ eeprom->state = byte_programming;
+ return;
+
+ case byte_programming:
+ if (device_event_queue_time(me) > eeprom->program_finish_time) {
+ finish_programming_byte(me, eeprom);
+ eeprom->state = read_reset;
+ continue;
+ }
+ /* ignore it */
+ return;
+
+ case chip_erase:
+ if (device_event_queue_time(me) > eeprom->program_finish_time) {
+ finish_erasing_chip(me, eeprom);
+ eeprom->state = read_reset;
+ continue;
+ }
+ /* ignore it */
+ return;
+
+ case sector_erase:
+ if (device_event_queue_time(me) > eeprom->program_finish_time) {
+ finish_erasing_sector(me, eeprom);
+ eeprom->state = eeprom->sector_state;
+ continue;
+ }
+ else if (device_event_queue_time(me) > eeprom->sector_start_time
+ && data == 0xb0) {
+ eeprom->sector_state = read_reset;
+ eeprom->state = sector_erase_suspend;
+ }
+ else {
+ if (eeprom->sector_state == read_reset
+ && address == 0x5555 && data == 0xaa)
+ eeprom->sector_state = write_nr_2;
+ else if (eeprom->sector_state == write_nr_2
+ && address == 0x2aaa && data == 0x55)
+ eeprom->sector_state = write_nr_3;
+ else if (eeprom->sector_state == write_nr_3
+ && address == 0x5555 && data == 0x80)
+ eeprom->sector_state = write_nr_4;
+ else if (eeprom->sector_state == write_nr_4
+ && address == 0x5555 && data == 0xaa)
+ eeprom->sector_state = write_nr_5;
+ else if (eeprom->sector_state == write_nr_5
+ && address == 0x2aaa && data == 0x55)
+ eeprom->sector_state = write_nr_6;
+ else if (eeprom->sector_state == write_nr_6
+ && address != 0x5555 && data == 0x30) {
+ if (device_event_queue_time(me) > eeprom->sector_start_time) {
+ DTRACE(eeprom, ("sector erase command after window closed\n"));
+ eeprom->sector_state = read_reset;
+ }
+ else {
+ start_erasing_sector(me, eeprom, address);
+ eeprom->sector_state = read_reset;
+ }
+ }
+ else {
+ invalid_write(me, eeprom->state, address, data, state2a(eeprom->sector_state));
+ eeprom->state = read_reset;
+ }
+ }
+ return;
+
+ case sector_erase_suspend:
+ if (data == 0x30)
+ eeprom->state = sector_erase;
+ else {
+ invalid_write(me, eeprom->state, address, data, "not resume command");
+ eeprom->state = read_reset;
+ }
+ return;
+
+ }
}
}
static unsigned
-eeprom_io_write_buffer(device *me,
- const void *source,
- int space,
- unsigned_word addr,
- unsigned nr_bytes,
- cpu *processor,
- unsigned_word cia)
+hw_eeprom_io_write_buffer(device *me,
+ const void *source,
+ int space,
+ unsigned_word addr,
+ unsigned nr_bytes,
+ cpu *processor,
+ unsigned_word cia)
{
- eeprom_device *eeprom = (eeprom_device*)device_data(me);
+ hw_eeprom_device *eeprom = (hw_eeprom_device*)device_data(me);
int i;
for (i = 0; i < nr_bytes; i++) {
- unsigned_word address = (addr + nr_bytes) % eeprom->sizeof_memory;
- eeprom_io_read_byte(address, eeprom->memory[address]);
+ unsigned_word address = (addr + i) % eeprom->sizeof_memory;
+ unsigned8 byte = ((unsigned8*)source)[i];
+ write_byte(me, eeprom, address, byte);
}
return nr_bytes;
}
+/* An instance of the eeprom */
+
+typedef struct _hw_eeprom_instance {
+ unsigned_word pos;
+ hw_eeprom_device *eeprom;
+ device *me;
+} hw_eeprom_instance;
+
+static void
+hw_eeprom_instance_delete(device_instance *instance)
+{
+ hw_eeprom_instance *data = device_instance_data(instance);
+ free(data);
+}
+
+static int
+hw_eeprom_instance_read(device_instance *instance,
+ void *buf,
+ unsigned_word len)
+{
+ hw_eeprom_instance *data = device_instance_data(instance);
+ int i;
+ if (data->eeprom->state != read_reset)
+ DITRACE(eeprom, ("eeprom not idle during instance read\n"));
+ for (i = 0; i < len; i++) {
+ ((unsigned8*)buf)[i] = data->eeprom->memory[data->pos];
+ data->pos = (data->pos + 1) % data->eeprom->sizeof_memory;
+ }
+ return len;
+}
-static device_callbacks const eeprom_callbacks = {
- { eeprom_init_address, },
+static int
+hw_eeprom_instance_write(device_instance *instance,
+ const void *buf,
+ unsigned_word len)
+{
+ hw_eeprom_instance *data = device_instance_data(instance);
+ int i;
+ if (data->eeprom->state != read_reset)
+ DITRACE(eeprom, ("eeprom not idle during instance write\n"));
+ for (i = 0; i < len; i++) {
+ data->eeprom->memory[data->pos] = ((unsigned8*)buf)[i];
+ data->pos = (data->pos + 1) % data->eeprom->sizeof_memory;
+ }
+ dump_eeprom(data->me, data->eeprom);
+ return len;
+}
+
+static int
+hw_eeprom_instance_seek(device_instance *instance,
+ unsigned_word pos_hi,
+ unsigned_word pos_lo)
+{
+ hw_eeprom_instance *data = device_instance_data(instance);
+ if (pos_lo >= data->eeprom->sizeof_memory)
+ device_error(data->me, "seek value 0x%lx out of range\n",
+ (unsigned long)pos_lo);
+ data->pos = pos_lo;
+ return 0;
+}
+
+static const device_instance_callbacks hw_eeprom_instance_callbacks = {
+ hw_eeprom_instance_delete,
+ hw_eeprom_instance_read,
+ hw_eeprom_instance_write,
+ hw_eeprom_instance_seek,
+};
+
+static device_instance *
+hw_eeprom_create_instance(device *me,
+ const char *path,
+ const char *args)
+{
+ hw_eeprom_device *eeprom = device_data(me);
+ hw_eeprom_instance *data = ZALLOC(hw_eeprom_instance);
+ data->eeprom = eeprom;
+ data->me = me;
+ return device_create_instance_from(me, NULL,
+ data,
+ path, args,
+ &hw_eeprom_instance_callbacks);
+}
+
+
+
+static device_callbacks const hw_eeprom_callbacks = {
+ { generic_device_init_address,
+ hw_eeprom_init_data },
{ NULL, }, /* address */
- { eeprom_io_read_buffer, eeprom_io_write_buffer }, /* IO */
+ { hw_eeprom_io_read_buffer,
+ hw_eeprom_io_write_buffer }, /* IO */
+ { NULL, }, /* DMA */
+ { NULL, }, /* interrupt */
+ { NULL, }, /* unit */
+ hw_eeprom_create_instance,
};
-const device_descriptor eeprom_device_descriptor[] = {
- { "eeprom", eeprom_create, &eeprom_callbacks },
+static void *
+hw_eeprom_create(const char *name,
+ const device_unit *unit_address,
+ const char *args)
+{
+ hw_eeprom_device *eeprom = ZALLOC(hw_eeprom_device);
+ return eeprom;
+}
+
+
+
+const device_descriptor hw_eeprom_device_descriptor[] = {
+ { "eeprom", hw_eeprom_create, &hw_eeprom_callbacks },
{ NULL },
};