-/* Simulator for the Hitachi SH architecture.
+/* Simulator for the Renesas (formerly Hitachi) / SuperH Inc. SH architecture.
Written by Steve Chamberlain of Cygnus Support.
sac@cygnus.com
#define SIGTRAP 5
#endif
-extern unsigned char sh_jump_table[], sh_dsp_table[0x1000], ppi_table[];
+extern unsigned short sh_jump_table[], sh_dsp_table[0x1000], ppi_table[];
int sim_write (SIM_DESC sd, SIM_ADDR addr, unsigned char *buffer, int size);
for a quit. */
#define POLL_QUIT_INTERVAL 0x60000
+typedef struct
+{
+ int regs[20];
+} regstacktype;
+
typedef union
{
int re;
/* sh3 */
int bank[8];
+ int dbr; /* debug base register */
+ int sgr; /* saved gr15 */
+ int ldst; /* load/store flag (boolean) */
+ int tbr;
+ int ibcr; /* sh2a bank control register */
+ int ibnr; /* sh2a bank number register */
} named;
int i[16];
} cregs;
unsigned char *ymem;
unsigned char *xmem_offset;
unsigned char *ymem_offset;
+ unsigned long bfd_mach;
+ regstacktype *regstack;
}
asregs;
int asints[40];
static int host_little_endian;
static char **prog_argv;
-#if 1
static int maskw = 0;
static int maskl = 0;
-#endif
static SIM_OPEN_KIND sim_kind;
static char *myname;
+static int tracing = 0;
/* Short hand definitions of the registers */
#define R0 saved_state.asregs.regs[0]
#define Rn saved_state.asregs.regs[n]
#define Rm saved_state.asregs.regs[m]
-#define UR0 (unsigned int)(saved_state.asregs.regs[0])
-#define UR (unsigned int)R
-#define UR (unsigned int)R
+#define UR0 (unsigned int) (saved_state.asregs.regs[0])
+#define UR (unsigned int) R
+#define UR (unsigned int) R
#define SR0 saved_state.asregs.regs[0]
#define CREG(n) (saved_state.asregs.cregs.i[(n)])
#define GBR saved_state.asregs.cregs.named.gbr
#define VBR saved_state.asregs.cregs.named.vbr
+#define DBR saved_state.asregs.cregs.named.dbr
+#define TBR saved_state.asregs.cregs.named.tbr
+#define IBCR saved_state.asregs.cregs.named.ibcr
+#define IBNR saved_state.asregs.cregs.named.ibnr
+#define BANKN (saved_state.asregs.cregs.named.ibnr & 0x1ff)
+#define ME ((saved_state.asregs.cregs.named.ibnr >> 14) & 0x3)
#define SSR saved_state.asregs.cregs.named.ssr
#define SPC saved_state.asregs.cregs.named.spc
+#define SGR saved_state.asregs.cregs.named.sgr
#define SREG(n) (saved_state.asregs.sregs.i[(n)])
#define MACH saved_state.asregs.sregs.named.mach
#define MACL saved_state.asregs.sregs.named.macl
/* Manipulate SR */
+#define SR_MASK_BO (1 << 14)
+#define SR_MASK_CS (1 << 13)
#define SR_MASK_DMY (1 << 11)
#define SR_MASK_DMX (1 << 10)
#define SR_MASK_M (1 << 9)
#define SR_MASK_RC 0x0fff0000
#define SR_RC_INCREMENT -0x00010000
+#define BO ((saved_state.asregs.cregs.named.sr & SR_MASK_BO) != 0)
+#define CS ((saved_state.asregs.cregs.named.sr & SR_MASK_CS) != 0)
#define M ((saved_state.asregs.cregs.named.sr & SR_MASK_M) != 0)
#define Q ((saved_state.asregs.cregs.named.sr & SR_MASK_Q) != 0)
#define S ((saved_state.asregs.cregs.named.sr & SR_MASK_S) != 0)
#define T ((saved_state.asregs.cregs.named.sr & SR_MASK_T) != 0)
+#define LDST ((saved_state.asregs.cregs.named.ldst) != 0)
#define SR_BL ((saved_state.asregs.cregs.named.sr & SR_MASK_BL) != 0)
#define SR_RB ((saved_state.asregs.cregs.named.sr & SR_MASK_RB) != 0)
saved_state.asregs.cregs.named.sr &= ~(BIT); \
} while (0)
+#define SET_SR_BO(EXP) SET_SR_BIT ((EXP), SR_MASK_BO)
+#define SET_SR_CS(EXP) SET_SR_BIT ((EXP), SR_MASK_CS)
+#define SET_BANKN(EXP) \
+do { \
+ IBNR = (IBNR & 0xfe00) | (EXP & 0x1f); \
+} while (0)
+#define SET_ME(EXP) \
+do { \
+ IBNR = (IBNR & 0x3fff) | ((EXP & 0x3) << 14); \
+} while (0)
#define SET_SR_M(EXP) SET_SR_BIT ((EXP), SR_MASK_M)
#define SET_SR_Q(EXP) SET_SR_BIT ((EXP), SR_MASK_Q)
#define SET_SR_S(EXP) SET_SR_BIT ((EXP), SR_MASK_S)
#define SET_SR_T(EXP) SET_SR_BIT ((EXP), SR_MASK_T)
+#define SET_LDST(EXP) (saved_state.asregs.cregs.named.ldst = ((EXP) != 0))
/* stc currently relies on being able to read SR without modifications. */
#define GET_SR() (saved_state.asregs.cregs.named.sr - 0)
#define FPSCR_MASK_SZ (1 << 20)
#define FPSCR_MASK_PR (1 << 19)
-#define FPSCR_FR ((GET_FPSCR() & FPSCR_MASK_FR) != 0)
-#define FPSCR_SZ ((GET_FPSCR() & FPSCR_MASK_SZ) != 0)
-#define FPSCR_PR ((GET_FPSCR() & FPSCR_MASK_PR) != 0)
+#define FPSCR_FR ((GET_FPSCR () & FPSCR_MASK_FR) != 0)
+#define FPSCR_SZ ((GET_FPSCR () & FPSCR_MASK_SZ) != 0)
+#define FPSCR_PR ((GET_FPSCR () & FPSCR_MASK_PR) != 0)
/* Count the number of arguments in an argv. */
static int
#define RAISE_EXCEPTION(x) \
(saved_state.asregs.exception = x, saved_state.asregs.insn_end = 0)
+#define RAISE_EXCEPTION_IF_IN_DELAY_SLOT() \
+ if (in_delay_slot) RAISE_EXCEPTION (SIGILL)
+
/* This function exists mainly for the purpose of setting a breakpoint to
catch simulated bus errors when running the simulator under GDB. */
raise_exception (x)
int x;
{
- RAISE_EXCEPTION(x);
+ RAISE_EXCEPTION (x);
}
void
#ifdef PARANOID
int valid[16];
-#define CREF(x) if(!valid[x]) fail();
+#define CREF(x) if (!valid[x]) fail ();
#define CDEF(x) valid[x] = 1;
#define UNDEF(x) valid[x] = 0;
#else
static void parse_and_set_memory_size PARAMS ((char *str));
static int IOMEM PARAMS ((int addr, int write, int value));
-static struct loop_bounds get_loop_bounds PARAMS((int, int, unsigned char *,
- unsigned char *, int, int));
-static void process_wlat_addr PARAMS((int, int));
-static void process_wwat_addr PARAMS((int, int));
-static void process_wbat_addr PARAMS((int, int));
-static int process_rlat_addr PARAMS((int));
-static int process_rwat_addr PARAMS((int));
-static int process_rbat_addr PARAMS((int));
+static struct loop_bounds get_loop_bounds PARAMS ((int, int, unsigned char *,
+ unsigned char *, int, int));
+static void process_wlat_addr PARAMS ((int, int));
+static void process_wwat_addr PARAMS ((int, int));
+static void process_wbat_addr PARAMS ((int, int));
+static int process_rlat_addr PARAMS ((int));
+static int process_rwat_addr PARAMS ((int));
+static int process_rbat_addr PARAMS ((int));
static void INLINE wlat_fast PARAMS ((unsigned char *, int, int, int));
static void INLINE wwat_fast PARAMS ((unsigned char *, int, int, int, int));
static void INLINE wbat_fast PARAMS ((unsigned char *, int, int, int));
if (((n) & 1) || ((m) & 1)) \
RAISE_EXCEPTION (SIGILL); \
else \
- SET_DR(n, (DR(n) OP DR(m))); \
+ SET_DR (n, (DR (n) OP DR (m))); \
} \
else \
- SET_FR(n, (FR(n) OP FR(m))); \
+ SET_FR (n, (FR (n) OP FR (m))); \
} while (0)
#define FP_UNARY(n, OP) \
if ((n) & 1) \
RAISE_EXCEPTION (SIGILL); \
else \
- SET_DR(n, (OP (DR(n)))); \
+ SET_DR (n, (OP (DR (n)))); \
} \
else \
- SET_FR(n, (OP (FR(n)))); \
+ SET_FR (n, (OP (FR (n)))); \
} while (0)
#define FP_CMP(n, OP, m) \
if (((n) & 1) || ((m) & 1)) \
RAISE_EXCEPTION (SIGILL); \
else \
- SET_SR_T (DR(n) OP DR(m)); \
+ SET_SR_T (DR (n) OP DR (m)); \
} \
else \
- SET_SR_T (FR(n) OP FR(m)); \
+ SET_SR_T (FR (n) OP FR (m)); \
} while (0)
static void
unsigned char *memory;
{
int v = value;
- unsigned int *p = (unsigned int *)(memory + x);
+ unsigned int *p = (unsigned int *) (memory + x);
WRITE_BUSERROR (x, maskl, v, process_wlat_addr);
*p = v;
}
unsigned char *memory;
{
int v = value;
- unsigned short *p = (unsigned short *)(memory + (x ^ endianw));
+ unsigned short *p = (unsigned short *) (memory + (x ^ endianw));
WRITE_BUSERROR (x, maskw, v, process_wwat_addr);
*p = v;
}
rlat_fast (memory, x, maskl)
unsigned char *memory;
{
- unsigned int *p = (unsigned int *)(memory + x);
+ unsigned int *p = (unsigned int *) (memory + x);
READ_BUSERROR (x, maskl, process_rlat_addr);
return *p;
unsigned char *memory;
int x, maskw, endianw;
{
- unsigned short *p = (unsigned short *)(memory + (x ^ endianw));
+ unsigned short *p = (unsigned short *) (memory + (x ^ endianw));
READ_BUSERROR (x, maskw, process_rwat_addr);
return *p;
riat_fast (insn_ptr, endianw)
unsigned char *insn_ptr;
{
- unsigned short *p = (unsigned short *)((size_t) insn_ptr ^ endianw);
+ unsigned short *p = (unsigned short *) ((size_t) insn_ptr ^ endianw);
return *p;
}
#define WLAT(x,v) (wlat_fast (memory, x, v, maskl))
#define WBAT(x,v) (wbat_fast (memory, x, v, maskb))
-#define RUWAT(x) (RWAT(x) & 0xffff)
-#define RSWAT(x) ((short)(RWAT(x)))
-#define RSLAT(x) ((long)(RLAT(x)))
-#define RSBAT(x) (SEXT(RBAT(x)))
+#define RUWAT(x) (RWAT (x) & 0xffff)
+#define RSWAT(x) ((short) (RWAT (x)))
+#define RSLAT(x) ((long) (RLAT (x)))
+#define RSBAT(x) (SEXT (RBAT (x)))
#define RDAT(x, n) (do_rdat (memory, (x), (n), (maskl)))
static int
#define SEXT(x) (((x & 0xff) ^ (~0x7f))+0x80)
#define SEXT12(x) (((x & 0xfff) ^ 0x800) - 0x800)
-#define SEXTW(y) ((int)((short)y))
+#define SEXTW(y) ((int) ((short) y))
#if 0
-#define SEXT32(x) ((int)((x & 0xffffffff) ^ 0x80000000U) - 0x7fffffff - 1)
+#define SEXT32(x) ((int) ((x & 0xffffffff) ^ 0x80000000U) - 0x7fffffff - 1)
#else
-#define SEXT32(x) ((int)(x))
+#define SEXT32(x) ((int) (x))
#endif
#define SIGN32(x) (SEXT32 (x) >> 31)
#define SET_NIP(x) nip = (x); CHECK_INSN_PTR (nip);
-#define Delay_Slot(TEMPPC) iword = RIAT (TEMPPC); goto top;
+static int in_delay_slot = 0;
+#define Delay_Slot(TEMPPC) iword = RIAT (TEMPPC); in_delay_slot = 1; goto top;
#define CHECK_INSN_PTR(p) \
do { \
#define L(x) thislock = x;
#define TL(x) if ((x) == prevlock) stalls++;
-#define TB(x,y) if ((x) == prevlock || (y)==prevlock) stalls++;
+#define TB(x,y) if ((x) == prevlock || (y) == prevlock) stalls++;
#endif
Besides, it's quite dangerous. */
#if 0
case SYS_execve:
- regs[0] = execve (ptr (regs[5]), (char **)ptr (regs[6]), (char **)ptr (regs[7]));
+ regs[0] = execve (ptr (regs[5]), (char **) ptr (regs[6]),
+ (char **) ptr (regs[7]));
break;
case SYS_execv:
- regs[0] = execve (ptr (regs[5]),(char **) ptr (regs[6]), 0);
+ regs[0] = execve (ptr (regs[5]), (char **) ptr (regs[6]), 0);
break;
#endif
case SYS_pipe:
case SYS_write:
strnswap (regs[6], regs[7]);
if (regs[5] == 1)
- regs[0] = (int)callback->write_stdout (callback, ptr(regs[6]), regs[7]);
+ regs[0] = (int) callback->write_stdout (callback,
+ ptr (regs[6]), regs[7]);
else
- regs[0] = (int)callback->write (callback, regs[5], ptr (regs[6]), regs[7]);
+ regs[0] = (int) callback->write (callback, regs[5],
+ ptr (regs[6]), regs[7]);
strnswap (regs[6], regs[7]);
break;
case SYS_lseek:
{
int len = strswaplen (regs[5]);
strnswap (regs[5], len);
- regs[0] = callback->open (callback,ptr (regs[5]), regs[6]);
+ regs[0] = callback->open (callback, ptr (regs[5]), regs[6]);
strnswap (regs[5], len);
break;
}
}
break;
+ case 13: /* Set IBNR */
+ IBNR = regs[0] & 0xffff;
+ break;
+ case 14: /* Set IBCR */
+ IBCR = regs[0] & 0xffff;
+ break;
case 0xc3:
case 255:
raise_exception (SIGTRAP);
long tempm, tempn;
long prod, macl, sum;
- tempm=RSWAT(regs[m]); regs[m]+=2;
- tempn=RSWAT(regs[n]); regs[n]+=2;
+ tempm=RSWAT (regs[m]); regs[m]+=2;
+ tempn=RSWAT (regs[n]); regs[n]+=2;
macl = MACL;
- prod = (long)(short) tempm * (long)(short) tempn;
+ prod = (long) (short) tempm * (long) (short) tempn;
sum = prod + macl;
if (S)
{
long long m64; /* 64 bit MAC */
}mac64;
- tempm = RSLAT(regs[m]);
+ tempm = RSLAT (regs[m]);
regs[m] += 4;
- tempn = RSLAT(regs[n]);
+ tempn = RSLAT (regs[n]);
regs[n] += 4;
mach = MACH;
mac64.m[0] = macl;
mac64.m[1] = mach;
- ans = (long long)tempm * (long long)tempn; /* Multiply 32bit * 32bit */
+ ans = (long long) tempm * (long long) tempn; /* Multiply 32bit * 32bit */
mac64.m64 += ans; /* Accumulate 64bit + 64 bit */
MACH = mach;
}
+enum {
+ B_BCLR = 0,
+ B_BSET = 1,
+ B_BST = 2,
+ B_BLD = 3,
+ B_BAND = 4,
+ B_BOR = 5,
+ B_BXOR = 6,
+ B_BLDNOT = 11,
+ B_BANDNOT = 12,
+ B_BORNOT = 13,
+
+ MOVB_RM = 0x0000,
+ MOVW_RM = 0x1000,
+ MOVL_RM = 0x2000,
+ FMOV_RM = 0x3000,
+ MOVB_MR = 0x4000,
+ MOVW_MR = 0x5000,
+ MOVL_MR = 0x6000,
+ FMOV_MR = 0x7000,
+ MOVU_BMR = 0x8000,
+ MOVU_WMR = 0x9000,
+};
+
+/* Do extended displacement move instructions. */
+void
+do_long_move_insn (int op, int disp12, int m, int n, int *thatlock)
+{
+ int memstalls = 0;
+ int thislock = *thatlock;
+ int endianw = global_endianw;
+ int *R = &(saved_state.asregs.regs[0]);
+ unsigned char *memory = saved_state.asregs.memory;
+ int maskb = ~((saved_state.asregs.msize - 1) & ~0);
+ unsigned char *insn_ptr = PT2H (saved_state.asregs.pc);
+
+ switch (op) {
+ case MOVB_RM: /* signed */
+ WBAT (disp12 * 1 + R[n], R[m]);
+ break;
+ case MOVW_RM:
+ WWAT (disp12 * 2 + R[n], R[m]);
+ break;
+ case MOVL_RM:
+ WLAT (disp12 * 4 + R[n], R[m]);
+ break;
+ case FMOV_RM: /* floating point */
+ if (FPSCR_SZ)
+ {
+ MA (1);
+ WDAT (R[n] + 8 * disp12, m);
+ }
+ else
+ WLAT (R[n] + 4 * disp12, FI (m));
+ break;
+ case MOVB_MR:
+ R[n] = RSBAT (disp12 * 1 + R[m]);
+ L (n);
+ break;
+ case MOVW_MR:
+ R[n] = RSWAT (disp12 * 2 + R[m]);
+ L (n);
+ break;
+ case MOVL_MR:
+ R[n] = RLAT (disp12 * 4 + R[m]);
+ L (n);
+ break;
+ case FMOV_MR:
+ if (FPSCR_SZ) {
+ MA (1);
+ RDAT (R[m] + 8 * disp12, n);
+ }
+ else
+ SET_FI (n, RLAT (R[m] + 4 * disp12));
+ break;
+ case MOVU_BMR: /* unsigned */
+ R[n] = RBAT (disp12 * 1 + R[m]);
+ L (n);
+ break;
+ case MOVU_WMR:
+ R[n] = RWAT (disp12 * 2 + R[m]);
+ L (n);
+ break;
+ default:
+ RAISE_EXCEPTION (SIGINT);
+ exit (1);
+ }
+ saved_state.asregs.memstalls += memstalls;
+ *thatlock = thislock;
+}
+
+/* Do binary logical bit-manipulation insns. */
+void
+do_blog_insn (int imm, int addr, int binop,
+ unsigned char *memory, int maskb)
+{
+ int oldval = RBAT (addr);
+
+ switch (binop) {
+ case B_BCLR: /* bclr.b */
+ WBAT (addr, oldval & ~imm);
+ break;
+ case B_BSET: /* bset.b */
+ WBAT (addr, oldval | imm);
+ break;
+ case B_BST: /* bst.b */
+ if (T)
+ WBAT (addr, oldval | imm);
+ else
+ WBAT (addr, oldval & ~imm);
+ break;
+ case B_BLD: /* bld.b */
+ SET_SR_T ((oldval & imm) != 0);
+ break;
+ case B_BAND: /* band.b */
+ SET_SR_T (T && ((oldval & imm) != 0));
+ break;
+ case B_BOR: /* bor.b */
+ SET_SR_T (T || ((oldval & imm) != 0));
+ break;
+ case B_BXOR: /* bxor.b */
+ SET_SR_T (T ^ ((oldval & imm) != 0));
+ break;
+ case B_BLDNOT: /* bldnot.b */
+ SET_SR_T ((oldval & imm) == 0);
+ break;
+ case B_BANDNOT: /* bandnot.b */
+ SET_SR_T (T && ((oldval & imm) == 0));
+ break;
+ case B_BORNOT: /* bornot.b */
+ SET_SR_T (T || ((oldval & imm) == 0));
+ break;
+ }
+}
float
fsca_s (int in, double (*f) (double))
{
architectural spec. */
frac = frexp (result, &exp);
frac = ldexp (frac, 24);
- error = 4.; /* 1 << 24-1-21 */
+ error = 4.0; /* 1 << 24-1-21 */
/* use eps to compensate for possible 1 ulp error in our 'exact' result. */
eps = ldexp (1., -29);
upper = floor (frac + error - eps);
return upper - result >= result - lower ? upper : lower;
}
+
+/* GET_LOOP_BOUNDS {EXTENDED}
+ These two functions compute the actual starting and ending point
+ of the repeat loop, based on the RS and RE registers (repeat start,
+ repeat stop). The extended version is called for LDRC, and the
+ regular version is called for SETRC. The difference is that for
+ LDRC, the loop start and end instructions are literally the ones
+ pointed to by RS and RE -- for SETRC, they're not (see docs). */
+
+static struct loop_bounds
+get_loop_bounds_ext (rs, re, memory, mem_end, maskw, endianw)
+ int rs, re;
+ unsigned char *memory, *mem_end;
+ int maskw, endianw;
+{
+ struct loop_bounds loop;
+
+ /* FIXME: should I verify RS < RE? */
+ loop.start = PT2H (RS); /* FIXME not using the params? */
+ loop.end = PT2H (RE & ~1); /* Ignore bit 0 of RE. */
+ SKIP_INSN (loop.end);
+ if (loop.end >= mem_end)
+ loop.end = PT2H (0);
+ return loop;
+}
+
static struct loop_bounds
get_loop_bounds (rs, re, memory, mem_end, maskw, endianw)
int rs, re;
return loop;
}
-static void
-ppi_insn();
+static void ppi_insn ();
#include "ppi.c"
int was_dsp = target_dsp;
unsigned long mach = bfd_get_mach (abfd);
- if (mach == bfd_mach_sh_dsp || mach == bfd_mach_sh3_dsp)
+ if (mach == bfd_mach_sh_dsp ||
+ mach == bfd_mach_sh4al_dsp ||
+ mach == bfd_mach_sh3_dsp)
{
int ram_area_size, xram_start, yram_start;
int new_select;
xram_start = 0x0800f000;
ram_area_size = 0x1000;
}
- if (mach == bfd_mach_sh3_dsp)
+ if (mach == bfd_mach_sh3_dsp || mach == bfd_mach_sh4al_dsp)
{
/* SH7612:
8KB each for X & Y memory;
saved_state.asregs.xyram_select = new_select;
free (saved_state.asregs.xmem);
free (saved_state.asregs.ymem);
- saved_state.asregs.xmem = (unsigned char *) calloc (1, ram_area_size);
- saved_state.asregs.ymem = (unsigned char *) calloc (1, ram_area_size);
+ saved_state.asregs.xmem =
+ (unsigned char *) calloc (1, ram_area_size);
+ saved_state.asregs.ymem =
+ (unsigned char *) calloc (1, ram_area_size);
/* Disable use of X / Y mmeory if not allocated. */
if (! saved_state.asregs.xmem || ! saved_state.asregs.ymem)
saved_state.asregs.yram_start = 1;
}
+ if (saved_state.asregs.regstack == NULL)
+ saved_state.asregs.regstack =
+ calloc (512, sizeof *saved_state.asregs.regstack);
+
if (target_dsp != was_dsp)
{
int i, tmp;
- for (i = sizeof sh_dsp_table - 1; i >= 0; i--)
+ for (i = (sizeof sh_dsp_table / sizeof sh_dsp_table[0]) - 1; i >= 0; i--)
{
tmp = sh_jump_table[0xf000 + i];
sh_jump_table[0xf000 + i] = sh_dsp_table[i];
init_pointers ()
{
host_little_endian = 0;
- *(char*)&host_little_endian = 1;
+ * (char*) &host_little_endian = 1;
host_little_endian &= 1;
if (saved_state.asregs.msize != 1 << sim_memory_size)
register int memstalls = 0;
register int insts = 0;
register int prevlock;
+#if 1
+ int thislock;
+#else
register int thislock;
+#endif
register unsigned int doprofile;
register int pollcount = 0;
/* endianw is used for every insn fetch, hence it makes sense to cache it.
void (*prev) ();
void (*prev_fpe) ();
- register unsigned char *jump_table = sh_jump_table;
+ register unsigned short *jump_table = sh_jump_table;
register int *R = &(saved_state.asregs.regs[0]);
/*register int T;*/
memory = saved_state.asregs.memory;
mem_end = memory + saved_state.asregs.msize;
- loop = get_loop_bounds (RS, RE, memory, mem_end, maskw, endianw);
+ if (RE & 1)
+ loop = get_loop_bounds_ext (RS, RE, memory, mem_end, maskw, endianw);
+ else
+ loop = get_loop_bounds (RS, RE, memory, mem_end, maskw, endianw);
+
insn_ptr = PT2H (saved_state.asregs.pc);
CHECK_INSN_PTR (insn_ptr);
insts++;
#endif
top:
+ if (tracing)
+ fprintf (stderr, "PC: %08x, insn: %04x\n", PH2T (insn_ptr), iword);
#include "code.c"
+ in_delay_slot = 0;
insn_ptr = nip;
if (--pollcount < 0)
return size;
}
+static int gdb_bank_number;
+enum {
+ REGBANK_MACH = 15,
+ REGBANK_IVN = 16,
+ REGBANK_PR = 17,
+ REGBANK_GBR = 18,
+ REGBANK_MACL = 19
+};
+
int
sim_store_register (sd, rn, memory, length)
SIM_DESC sd;
unsigned val;
init_pointers ();
- val = swap (* (int *)memory);
+ val = swap (* (int *) memory);
switch (rn)
{
case SIM_SH_R0_REGNUM: case SIM_SH_R1_REGNUM: case SIM_SH_R2_REGNUM:
case SIM_SH_R2_BANK0_REGNUM: case SIM_SH_R3_BANK0_REGNUM:
case SIM_SH_R4_BANK0_REGNUM: case SIM_SH_R5_BANK0_REGNUM:
case SIM_SH_R6_BANK0_REGNUM: case SIM_SH_R7_BANK0_REGNUM:
+ if (saved_state.asregs.bfd_mach == bfd_mach_sh2a)
+ {
+ rn -= SIM_SH_R0_BANK0_REGNUM;
+ saved_state.asregs.regstack[gdb_bank_number].regs[rn] = val;
+ }
+ else
if (SR_MD && SR_RB)
Rn_BANK (rn - SIM_SH_R0_BANK0_REGNUM) = val;
else
case SIM_SH_R2_BANK1_REGNUM: case SIM_SH_R3_BANK1_REGNUM:
case SIM_SH_R4_BANK1_REGNUM: case SIM_SH_R5_BANK1_REGNUM:
case SIM_SH_R6_BANK1_REGNUM: case SIM_SH_R7_BANK1_REGNUM:
+ if (saved_state.asregs.bfd_mach == bfd_mach_sh2a)
+ {
+ rn -= SIM_SH_R0_BANK1_REGNUM;
+ saved_state.asregs.regstack[gdb_bank_number].regs[rn + 8] = val;
+ }
+ else
if (SR_MD && SR_RB)
saved_state.asregs.regs[rn - SIM_SH_R0_BANK1_REGNUM] = val;
else
case SIM_SH_R6_BANK_REGNUM: case SIM_SH_R7_BANK_REGNUM:
SET_Rn_BANK (rn - SIM_SH_R0_BANK_REGNUM, val);
break;
+ case SIM_SH_TBR_REGNUM:
+ TBR = val;
+ break;
+ case SIM_SH_IBNR_REGNUM:
+ IBNR = val;
+ break;
+ case SIM_SH_IBCR_REGNUM:
+ IBCR = val;
+ break;
+ case SIM_SH_BANK_REGNUM:
+ /* This is a pseudo-register maintained just for gdb.
+ It tells us what register bank gdb would like to read/write. */
+ gdb_bank_number = val;
+ break;
+ case SIM_SH_BANK_MACL_REGNUM:
+ saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_MACL] = val;
+ break;
+ case SIM_SH_BANK_GBR_REGNUM:
+ saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_GBR] = val;
+ break;
+ case SIM_SH_BANK_PR_REGNUM:
+ saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_PR] = val;
+ break;
+ case SIM_SH_BANK_IVN_REGNUM:
+ saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_IVN] = val;
+ break;
+ case SIM_SH_BANK_MACH_REGNUM:
+ saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_MACH] = val;
+ break;
default:
return 0;
}
case SIM_SH_R2_BANK0_REGNUM: case SIM_SH_R3_BANK0_REGNUM:
case SIM_SH_R4_BANK0_REGNUM: case SIM_SH_R5_BANK0_REGNUM:
case SIM_SH_R6_BANK0_REGNUM: case SIM_SH_R7_BANK0_REGNUM:
+ if (saved_state.asregs.bfd_mach == bfd_mach_sh2a)
+ {
+ rn -= SIM_SH_R0_BANK0_REGNUM;
+ val = saved_state.asregs.regstack[gdb_bank_number].regs[rn];
+ }
+ else
val = (SR_MD && SR_RB
? Rn_BANK (rn - SIM_SH_R0_BANK0_REGNUM)
: saved_state.asregs.regs[rn - SIM_SH_R0_BANK0_REGNUM]);
case SIM_SH_R2_BANK1_REGNUM: case SIM_SH_R3_BANK1_REGNUM:
case SIM_SH_R4_BANK1_REGNUM: case SIM_SH_R5_BANK1_REGNUM:
case SIM_SH_R6_BANK1_REGNUM: case SIM_SH_R7_BANK1_REGNUM:
+ if (saved_state.asregs.bfd_mach == bfd_mach_sh2a)
+ {
+ rn -= SIM_SH_R0_BANK1_REGNUM;
+ val = saved_state.asregs.regstack[gdb_bank_number].regs[rn + 8];
+ }
+ else
val = (! SR_MD || ! SR_RB
? Rn_BANK (rn - SIM_SH_R0_BANK1_REGNUM)
: saved_state.asregs.regs[rn - SIM_SH_R0_BANK1_REGNUM]);
case SIM_SH_R6_BANK_REGNUM: case SIM_SH_R7_BANK_REGNUM:
val = Rn_BANK (rn - SIM_SH_R0_BANK_REGNUM);
break;
+ case SIM_SH_TBR_REGNUM:
+ val = TBR;
+ break;
+ case SIM_SH_IBNR_REGNUM:
+ val = IBNR;
+ break;
+ case SIM_SH_IBCR_REGNUM:
+ val = IBCR;
+ break;
+ case SIM_SH_BANK_REGNUM:
+ /* This is a pseudo-register maintained just for gdb.
+ It tells us what register bank gdb would like to read/write. */
+ val = gdb_bank_number;
+ break;
+ case SIM_SH_BANK_MACL_REGNUM:
+ val = saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_MACL];
+ break;
+ case SIM_SH_BANK_GBR_REGNUM:
+ val = saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_GBR];
+ break;
+ case SIM_SH_BANK_PR_REGNUM:
+ val = saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_PR];
+ break;
+ case SIM_SH_BANK_IVN_REGNUM:
+ val = saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_IVN];
+ break;
+ case SIM_SH_BANK_MACH_REGNUM:
+ val = saved_state.asregs.regstack[gdb_bank_number].regs[REGBANK_MACH];
+ break;
default:
return 0;
}
sim_trace (sd)
SIM_DESC sd;
{
- return 0;
+ tracing = 1;
+ sim_resume (sd, 0, 0);
+ tracing = 0;
+ return 1;
}
void
SIM_DESC sd;
int verbose;
{
- double timetaken = (double) saved_state.asregs.ticks / (double) now_persec ();
+ double timetaken =
+ (double) saved_state.asregs.ticks / (double) now_persec ();
double virttime = saved_state.asregs.cycles / 36.0e6;
callback->printf_filtered (callback, "\n\n# instructions executed %10d\n",
prog_bfd = sim_load_file (sd, myname, callback, prog, abfd,
sim_kind == SIM_OPEN_DEBUG,
0, sim_write);
+
+ /* Set the bfd machine type. */
+ if (prog_bfd)
+ saved_state.asregs.bfd_mach = bfd_get_mach (prog_bfd);
+ else if (abfd)
+ saved_state.asregs.bfd_mach = bfd_get_mach (abfd);
+ else
+ saved_state.asregs.bfd_mach = 0;
+
if (prog_bfd == NULL)
return SIM_RC_FAIL;
if (abfd == NULL)
{
/* Clear the registers. */
memset (&saved_state, 0,
- (char*)&saved_state.asregs.end_of_registers - (char*)&saved_state);
+ (char*) &saved_state.asregs.end_of_registers - (char*) &saved_state);
/* Set the PC. */
if (prog_bfd != NULL)
saved_state.asregs.pc = bfd_get_start_address (prog_bfd);
+ /* Set the bfd machine type. */
+ if (prog_bfd != NULL)
+ saved_state.asregs.bfd_mach = bfd_get_mach (prog_bfd);
+
/* Record the program's arguments. */
prog_argv = argv;
}
cmdsize = strlen (sms_cmd);
- if (strncmp (cmd, sms_cmd, cmdsize) == 0 && strchr (" \t", cmd[cmdsize]) != NULL)
+ if (strncmp (cmd, sms_cmd, cmdsize) == 0
+ && strchr (" \t", cmd[cmdsize]) != NULL)
{
parse_and_set_memory_size (cmd + cmdsize + 1);
}
else if (strcmp (cmd, "help") == 0)
{
- (callback->printf_filtered) (callback, "List of SH simulator commands:\n\n");
+ (callback->printf_filtered) (callback,
+ "List of SH simulator commands:\n\n");
(callback->printf_filtered) (callback, "set-memory-size <n> -- Set the number of address bits to use\n");
(callback->printf_filtered) (callback, "\n");
}
projects / deliverable / binutils-gdb.git / blobdiff