Add support for --enable-sim-alignment to simulator common aclocal.m4

[deliverable/binutils-gdb.git] / sim / tic80 / configure

diff --git a/sim/tic80/configure b/sim/tic80/configure
index 126a3301f7544ac781f032c93cee5c00d33c4a91..21e32a66d5cab0bf80066acf06c901b2735b6135 100755 (executable)
--- a/sim/tic80/configure
+++ b/sim/tic80/configure
@@ -28,7 +28,7 @@ ac_help="$ac_help
 ac_help="$ac_help
   --enable-sim-endian=endian           Specify target byte endian orientation."
 ac_help="$ac_help
-  --enable-sim-alignment=align         Specify strict or nonstrict alignment."
+  --enable-sim-alignment=align         Specify strict,  nonstrict or forced alignment of memory accesses."
 ac_help="$ac_help
   --enable-sim-hostendain=end          Specify host byte endian orientation."
 ac_help="$ac_help
@@ -1372,21 +1372,36 @@ else
 fi
 
 
+wire_alignment=""
+default_alignment=""
+default_sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT"
 
 # Check whether --enable-sim-alignment or --disable-sim-alignment was given.
 if test "${enable_sim_alignment+set}" = set; then
   enableval="$enable_sim_alignment"
   case "${enableval}" in
-  yes | strict | STRICT)       sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
-  no | nonstrict | NONSTRICT)  sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
-  0 | default | DEFAULT)       sim_alignment="-DWITH_ALIGNMENT=0";;
-  *)                           { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";;
+  strict | STRICT)       sim_alignment="-DWITH_ALIGNMENT=STRICT_ALIGNMENT";;
+  nonstrict | NONSTRICT) sim_alignment="-DWITH_ALIGNMENT=NONSTRICT_ALIGNMENT";;
+  forced | FORCED)       sim_alignment="-DWITH_ALIGNMENT=FORCED_ALIGNMENT";;
+  yes) if test x"$wire_alignment" != x; then
+        sim_alignment="-DWITH_ALIGNMENT=${wire_alignment}"
+       else
+        echo "No hard-wired alignment for target $target" 1>&6
+        sim_alignment="-DWITH_ALIGNMENT=0"
+       fi;;
+  no)  if test x"$default_alignment" != x; then
+        sim_alignment="-DWITH_DEFAULT_ALIGNMENT=${default_alignment}"
+       else
+        echo "No default alignment for target $target" 1>&6
+        sim_alignment="-DWITH_DEFAULT_ALIGNMENT=0"
+       fi;;
+  *)   { echo "configure: error: "Unknown value $enableval passed to --enable-sim-alignment"" 1>&2; exit 1; }; sim_alignment="";;
 esac
 if test x"$silent" != x"yes" && test x"$sim_alignment" != x""; then
   echo "Setting alignment flags = $sim_alignment" 6>&1
 fi
 else
-  sim_alignment=""
+  sim_alignment="${default_sim_alignment}"
 fi
 
 
@@ -1407,14 +1422,14 @@ else
   
 if test "x$cross_compiling" = "xno"; then
   echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:1411: checking whether byte ordering is bigendian" >&5
+echo "configure:1426: checking whether byte ordering is bigendian" >&5
 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_bigendian=unknown
 # See if sys/param.h defines the BYTE_ORDER macro.
 cat > conftest.$ac_ext <<EOF
-#line 1418 "configure"
+#line 1433 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -1425,11 +1440,11 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:1429: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1444: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   # It does; now see whether it defined to BIG_ENDIAN or not.
 cat > conftest.$ac_ext <<EOF
-#line 1433 "configure"
+#line 1448 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -1440,7 +1455,7 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:1444: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1459: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_bigendian=yes
 else
@@ -1460,7 +1475,7 @@ if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 1464 "configure"
+#line 1479 "configure"
 #include "confdefs.h"
 main () {
   /* Are we little or big endian?  From Harbison&Steele.  */
@@ -1473,7 +1488,7 @@ main () {
   exit (u.c[sizeof (long) - 1] == 1);
 }
 EOF
-if { (eval echo configure:1477: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1492: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_bigendian=no
 else
@@ -1547,17 +1562,17 @@ for ac_hdr in stdlib.h unistd.h string.h strings.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1551: checking for $ac_hdr" >&5
+echo "configure:1566: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1556 "configure"
+#line 1571 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1561: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1576: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1586,12 +1601,12 @@ done
 for ac_func in getpid kill
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1590: checking for $ac_func" >&5
+echo "configure:1605: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1595 "configure"
+#line 1610 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1614,7 +1629,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1618: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1633: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else