Re-do --enable-sim-hardware so that each simulator can specify the devices

[deliverable/binutils-gdb.git] / sim / txvu / configure

diff --git a/sim/txvu/configure b/sim/txvu/configure
index d4b1a7746ed03a3e9aea2637525f07cf2f356de5..852c3fe73094d37e46e26c7c245eb937f3e36711 100755 (executable)
--- a/sim/txvu/configure
+++ b/sim/txvu/configure
@@ -75,11 +75,10 @@
 
 
 
-
 
 
 # Guess values for system-dependent variables and create Makefiles.
-# Generated automatically using autoconf version 2.12 
+# Generated automatically using autoconf version 2.12.1 
 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc.
 #
 # This configure script is free software; the Free Software Foundation
@@ -157,6 +156,7 @@ mandir='${prefix}/man'
 # Initialize some other variables.
 subdirs=
 MFLAGS= MAKEFLAGS=
+SHELL=${CONFIG_SHELL-/bin/sh}
 # Maximum number of lines to put in a shell here document.
 ac_max_here_lines=12
 
@@ -440,7 +440,7 @@ EOF
     verbose=yes ;;
 
   -version | --version | --versio | --versi | --vers)
-    echo "configure generated by autoconf version 2.12"
+    echo "configure generated by autoconf version 2.12.1"
     exit 0 ;;
 
   -with-* | --with-*)
@@ -734,7 +734,7 @@ esac
 
 
 # Make sure we can run config.sub.
-if $ac_config_sub sun4 >/dev/null 2>&1; then :
+if ${CONFIG_SHELL-/bin/sh} $ac_config_sub sun4 >/dev/null 2>&1; then :
 else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; }
 fi
 
@@ -746,14 +746,14 @@ case "$host_alias" in
 NONE)
   case $nonopt in
   NONE)
-    if host_alias=`$ac_config_guess`; then :
+    if host_alias=`${CONFIG_SHELL-/bin/sh} $ac_config_guess`; then :
     else { echo "configure: error: can not guess host type; you must specify one" 1>&2; exit 1; }
     fi ;;
   *) host_alias=$nonopt ;;
   esac ;;
 esac
 
-host=`$ac_config_sub $host_alias`
+host=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $host_alias`
 host_cpu=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 host_vendor=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
@@ -771,7 +771,7 @@ NONE)
   esac ;;
 esac
 
-target=`$ac_config_sub $target_alias`
+target=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $target_alias`
 target_cpu=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 target_vendor=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
@@ -789,7 +789,7 @@ NONE)
   esac ;;
 esac
 
-build=`$ac_config_sub $build_alias`
+build=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $build_alias`
 build_cpu=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'`
 build_vendor=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'`
 build_os=`echo $build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'`
@@ -996,11 +996,12 @@ fi
 # SunOS /usr/etc/install
 # IRIX /sbin/install
 # AIX /bin/install
+# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag
 # AFS /usr/afsws/bin/install, which mishandles nonexistent args
 # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff"
 # ./install, which can be erroneously created by make from ./install.sh.
 echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6
-echo "configure:1004: checking for a BSD compatible install" >&5
+echo "configure:1005: checking for a BSD compatible install" >&5
 if test -z "$INSTALL"; then
 if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -1012,12 +1013,13 @@ else
     /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;;
     *)
       # OSF1 and SCO ODT 3.0 have their own names for install.
-      for ac_prog in ginstall installbsd scoinst install; do
+      # Don't use installbsd from OSF since it installs stuff as root
+      # by default.
+      for ac_prog in ginstall scoinst install; do
         if test -f $ac_dir/$ac_prog; then
          if test $ac_prog = install &&
             grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then
            # AIX install.  It has an incompatible calling convention.
-           # OSF/1 installbsd also uses dspmsg, but is usable.
            :
          else
            ac_cv_path_install="$ac_dir/$ac_prog -c"
@@ -1065,7 +1067,7 @@ AR=${AR-ar}
 # Extract the first word of "ranlib", so it can be a program name with args.
 set dummy ranlib; ac_word=$2
 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6
-echo "configure:1069: checking for $ac_word" >&5
+echo "configure:1071: checking for $ac_word" >&5
 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
@@ -1099,17 +1101,17 @@ for ac_hdr in stdlib.h string.h strings.h unistd.h time.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1103: checking for $ac_hdr" >&5
+echo "configure:1105: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1108 "configure"
+#line 1110 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1113: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1115: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1139,17 +1141,17 @@ for ac_hdr in sys/time.h sys/resource.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1143: checking for $ac_hdr" >&5
+echo "configure:1145: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1148 "configure"
+#line 1150 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1153: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1155: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1179,17 +1181,17 @@ for ac_hdr in fcntl.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:1183: checking for $ac_hdr" >&5
+echo "configure:1185: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1188 "configure"
+#line 1190 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:1193: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:1195: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -1218,12 +1220,12 @@ done
 for ac_func in getrusage time sigaction
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:1222: checking for $ac_func" >&5
+echo "configure:1224: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1227 "configure"
+#line 1229 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -1246,7 +1248,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:1250: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:1252: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -1419,12 +1421,12 @@ fi
 
 
 echo $ac_n "checking return type of signal handlers""... $ac_c" 1>&6
-echo "configure:1423: checking return type of signal handlers" >&5
+echo "configure:1425: checking return type of signal handlers" >&5
 if eval "test \"`echo '$''{'ac_cv_type_signal'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 1428 "configure"
+#line 1430 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <signal.h>
@@ -1441,7 +1443,7 @@ int main() {
 int i;
 ; return 0; }
 EOF
-if { (eval echo configure:1445: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1447: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_type_signal=void
 else
@@ -1585,14 +1587,14 @@ else
   
 if test "x$cross_compiling" = "xno"; then
   echo $ac_n "checking whether byte ordering is bigendian""... $ac_c" 1>&6
-echo "configure:1589: checking whether byte ordering is bigendian" >&5
+echo "configure:1591: checking whether byte ordering is bigendian" >&5
 if eval "test \"`echo '$''{'ac_cv_c_bigendian'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   ac_cv_c_bigendian=unknown
 # See if sys/param.h defines the BYTE_ORDER macro.
 cat > conftest.$ac_ext <<EOF
-#line 1596 "configure"
+#line 1598 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -1603,11 +1605,11 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:1607: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1609: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   # It does; now see whether it defined to BIG_ENDIAN or not.
 cat > conftest.$ac_ext <<EOF
-#line 1611 "configure"
+#line 1613 "configure"
 #include "confdefs.h"
 #include <sys/types.h>
 #include <sys/param.h>
@@ -1618,7 +1620,7 @@ int main() {
 #endif
 ; return 0; }
 EOF
-if { (eval echo configure:1622: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
+if { (eval echo configure:1624: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then
   rm -rf conftest*
   ac_cv_c_bigendian=yes
 else
@@ -1638,7 +1640,7 @@ if test "$cross_compiling" = yes; then
     { echo "configure: error: can not run test program while cross compiling" 1>&2; exit 1; }
 else
   cat > conftest.$ac_ext <<EOF
-#line 1642 "configure"
+#line 1644 "configure"
 #include "confdefs.h"
 main () {
   /* Are we little or big endian?  From Harbison&Steele.  */
@@ -1651,7 +1653,7 @@ main () {
   exit (u.c[sizeof (long) - 1] == 1);
 }
 EOF
-if { (eval echo configure:1655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
+if { (eval echo configure:1657: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null
 then
   ac_cv_c_bigendian=no
 else
@@ -2007,17 +2009,17 @@ for ac_hdr in string.h strings.h stdlib.h stdlib.h
 do
 ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'`
 echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6
-echo "configure:2011: checking for $ac_hdr" >&5
+echo "configure:2013: checking for $ac_hdr" >&5
 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2016 "configure"
+#line 2018 "configure"
 #include "confdefs.h"
 #include <$ac_hdr>
 EOF
 ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out"
-{ (eval echo configure:2021: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
+{ (eval echo configure:2023: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }
 ac_err=`grep -v '^ *+' conftest.out`
 if test -z "$ac_err"; then
   rm -rf conftest*
@@ -2044,7 +2046,7 @@ fi
 done
 
 echo $ac_n "checking for fabs in -lm""... $ac_c" 1>&6
-echo "configure:2048: checking for fabs in -lm" >&5
+echo "configure:2050: checking for fabs in -lm" >&5
 ac_lib_var=`echo m'_'fabs | sed 'y%./+-%__p_%'`
 if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
@@ -2052,7 +2054,7 @@ else
   ac_save_LIBS="$LIBS"
 LIBS="-lm  $LIBS"
 cat > conftest.$ac_ext <<EOF
-#line 2056 "configure"
+#line 2058 "configure"
 #include "confdefs.h"
 /* Override any gcc2 internal prototype to avoid an error.  */
 /* We use char because int might match the return type of a gcc2
@@ -2063,7 +2065,7 @@ int main() {
 fabs()
 ; return 0; }
 EOF
-if { (eval echo configure:2067: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2069: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_lib_$ac_lib_var=yes"
 else
@@ -2093,12 +2095,12 @@ fi
 for ac_func in aint anint sqrt
 do
 echo $ac_n "checking for $ac_func""... $ac_c" 1>&6
-echo "configure:2097: checking for $ac_func" >&5
+echo "configure:2099: checking for $ac_func" >&5
 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then
   echo $ac_n "(cached) $ac_c" 1>&6
 else
   cat > conftest.$ac_ext <<EOF
-#line 2102 "configure"
+#line 2104 "configure"
 #include "confdefs.h"
 /* System header to define __stub macros and hopefully few prototypes,
     which can conflict with char $ac_func(); below.  */
@@ -2121,7 +2123,7 @@ $ac_func();
 
 ; return 0; }
 EOF
-if { (eval echo configure:2125: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
+if { (eval echo configure:2127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then
   rm -rf conftest*
   eval "ac_cv_func_$ac_func=yes"
 else
@@ -2171,7 +2173,7 @@ EOF
 # Ultrix sh set writes to stderr and can't be redirected directly,
 # and sets the high bit in the cache file unless we assign to the vars.
 (set) 2>&1 |
-  case `(ac_space=' '; set) 2>&1` in
+  case `(ac_space=' '; set) 2>&1 | grep ac_space` in
   *ac_space=\ *)
     # `set' does not quote correctly, so add quotes (double-quote substitution
     # turns \\\\ into \\, and sed turns \\ into \).
@@ -2238,7 +2240,7 @@ do
     echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion"
     exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;;
   -version | --version | --versio | --versi | --vers | --ver | --ve | --v)
-    echo "$CONFIG_STATUS generated by autoconf version 2.12"
+    echo "$CONFIG_STATUS generated by autoconf version 2.12.1"
     exit 0 ;;
   -help | --help | --hel | --he | --h)
     echo "\$ac_cs_usage"; exit 0 ;;
@@ -2269,8 +2271,7 @@ s%@sim_scache@%$sim_scache%g
 s%@sim_default_model@%$sim_default_model%g
 s%@sim_hardware@%$sim_hardware%g
 s%@sim_hw_obj@%$sim_hw_obj%g
-s%@sim_dv_src@%$sim_dv_src%g
-s%@sim_dv_obj@%$sim_dv_obj%g
+s%@sim_hw@%$sim_hw%g
 s%@sim_inline@%$sim_inline%g
 s%@sim_packages@%$sim_packages%g
 s%@sim_regparm@%$sim_regparm%g
@@ -2279,6 +2280,7 @@ s%@sim_smp@%$sim_smp%g
 s%@sim_stdcall@%$sim_stdcall%g
 s%@sim_xor_endian@%$sim_xor_endian%g
 s%@sim_warnings@%$sim_warnings%g
+s%@SHELL@%$SHELL%g
 s%@CFLAGS@%$CFLAGS%g
 s%@CPPFLAGS@%$CPPFLAGS%g
 s%@CXXFLAGS@%$CXXFLAGS%g