ASoC: Convert WM8962 register access map to modern style
[deliverable/linux.git] / sound / soc / codecs / sgtl5000.c
index f6b6551940ab29b80ec2a806f720801e6a72b10c..7f4ba819a9f681dad3f962ae7c65c60d73b0f2a3 100644 (file)
@@ -16,7 +16,6 @@
 #include <linux/pm.h>
 #include <linux/i2c.h>
 #include <linux/clk.h>
-#include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
 #include <linux/regulator/consumer.h>
@@ -923,7 +922,7 @@ static int sgtl5000_set_bias_level(struct snd_soc_codec *codec,
                        SNDRV_PCM_FMTBIT_S24_LE |\
                        SNDRV_PCM_FMTBIT_S32_LE)
 
-static struct snd_soc_dai_ops sgtl5000_ops = {
+static const struct snd_soc_dai_ops sgtl5000_ops = {
        .hw_params = sgtl5000_pcm_hw_params,
        .digital_mute = sgtl5000_digital_mute,
        .set_fmt = sgtl5000_set_dai_fmt,
@@ -968,7 +967,7 @@ static int sgtl5000_volatile_register(struct snd_soc_codec *codec,
 }
 
 #ifdef CONFIG_SUSPEND
-static int sgtl5000_suspend(struct snd_soc_codec *codec, pm_message_t state)
+static int sgtl5000_suspend(struct snd_soc_codec *codec)
 {
        sgtl5000_set_bias_level(codec, SND_SOC_BIAS_OFF);
 
@@ -988,12 +987,12 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
        /* restore regular registers */
        for (reg = 0; reg <= SGTL5000_CHIP_SHORT_CTRL; reg += 2) {
 
-               /* this regs depends on the others */
+               /* These regs should restore in particular order */
                if (reg == SGTL5000_CHIP_ANA_POWER ||
                        reg == SGTL5000_CHIP_CLK_CTRL ||
                        reg == SGTL5000_CHIP_LINREG_CTRL ||
                        reg == SGTL5000_CHIP_LINE_OUT_CTRL ||
-                       reg == SGTL5000_CHIP_CLK_CTRL)
+                       reg == SGTL5000_CHIP_REF_CTRL)
                        continue;
 
                snd_soc_write(codec, reg, cache[reg]);
@@ -1004,8 +1003,17 @@ static int sgtl5000_restore_regs(struct snd_soc_codec *codec)
                snd_soc_write(codec, reg, cache[reg]);
 
        /*
-        * restore power and other regs according
-        * to set_power() and set_clock()
+        * restore these regs according to the power setting sequence in
+        * sgtl5000_set_power_regs() and clock setting sequence in
+        * sgtl5000_set_clock().
+        *
+        * The order of restore is:
+        * 1. SGTL5000_CHIP_CLK_CTRL MCLK_FREQ bits (1:0) should be restore after
+        *    SGTL5000_CHIP_ANA_POWER PLL bits set
+        * 2. SGTL5000_CHIP_LINREG_CTRL should be set before
+        *    SGTL5000_CHIP_ANA_POWER LINREG_D restored
+        * 3. SGTL5000_CHIP_REF_CTRL controls Analog Ground Voltage,
+        *    prefer to resotre it after SGTL5000_CHIP_ANA_POWER restored
         */
        snd_soc_write(codec, SGTL5000_CHIP_LINREG_CTRL,
                        cache[SGTL5000_CHIP_LINREG_CTRL]);
@@ -1077,7 +1085,7 @@ static int sgtl5000_set_power_regs(struct snd_soc_codec *codec)
        /* according to datasheet, maximum voltage of supplies */
        if (vdda > 3600 || vddio > 3600 || vddd > 1980) {
                dev_err(codec->dev,
-                       "exceed max voltage vdda %dmv vddio %dma vddd %dma\n",
+                       "exceed max voltage vdda %dmV vddio %dmV vddd %dmV\n",
                        vdda, vddio, vddd);
 
                return -EINVAL;
@@ -1402,7 +1410,8 @@ static __devinit int sgtl5000_i2c_probe(struct i2c_client *client,
        struct sgtl5000_priv *sgtl5000;
        int ret;
 
-       sgtl5000 = kzalloc(sizeof(struct sgtl5000_priv), GFP_KERNEL);
+       sgtl5000 = devm_kzalloc(&client->dev, sizeof(struct sgtl5000_priv),
+                                                               GFP_KERNEL);
        if (!sgtl5000)
                return -ENOMEM;
 
@@ -1410,22 +1419,13 @@ static __devinit int sgtl5000_i2c_probe(struct i2c_client *client,
 
        ret = snd_soc_register_codec(&client->dev,
                        &sgtl5000_driver, &sgtl5000_dai, 1);
-       if (ret) {
-               dev_err(&client->dev, "Failed to register codec: %d\n", ret);
-               kfree(sgtl5000);
-               return ret;
-       }
-
-       return 0;
+       return ret;
 }
 
 static __devexit int sgtl5000_i2c_remove(struct i2c_client *client)
 {
-       struct sgtl5000_priv *sgtl5000 = i2c_get_clientdata(client);
-
        snd_soc_unregister_codec(&client->dev);
 
-       kfree(sgtl5000);
        return 0;
 }
 
@@ -1466,5 +1466,5 @@ static void __exit sgtl5000_exit(void)
 module_exit(sgtl5000_exit);
 
 MODULE_DESCRIPTION("Freescale SGTL5000 ALSA SoC Codec Driver");
-MODULE_AUTHOR("Zeng Zhaoming <zhaoming.zeng@freescale.com>");
+MODULE_AUTHOR("Zeng Zhaoming <zengzm.kernel@gmail.com>");
 MODULE_LICENSE("GPL");
This page took 0.02801 seconds and 5 git commands to generate.