#include <linux/pm.h>
#include <linux/i2c.h>
#include <linux/platform_device.h>
+#include <linux/mfd/wm8994/registers.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/pcm_params.h>
static const DECLARE_TLV_DB_SCALE(spkmixout_tlv, -1800, 600, 1);
static const DECLARE_TLV_DB_SCALE(outpga_tlv, -5700, 100, 0);
static const unsigned int spkboost_tlv[] = {
- TLV_DB_RANGE_HEAD(7),
+ TLV_DB_RANGE_HEAD(2),
0, 6, TLV_DB_SCALE_ITEM(0, 150, 0),
7, 7, TLV_DB_SCALE_ITEM(1200, 0, 0),
};
{
struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
s8 offset;
- u16 reg, reg_l, reg_r, dcs_cfg;
+ u16 reg, reg_l, reg_r, dcs_cfg, dcs_reg;
+
+ switch (hubs->dcs_readback_mode) {
+ case 2:
+ dcs_reg = WM8994_DC_SERVO_4E;
+ break;
+ default:
+ dcs_reg = WM8993_DC_SERVO_3;
+ break;
+ }
/* If we're using a digital only path and have a previously
* callibrated DC servo offset stored then use that. */
if (hubs->class_w && hubs->class_w_dcs) {
dev_dbg(codec->dev, "Using cached DC servo offset %x\n",
hubs->class_w_dcs);
- snd_soc_write(codec, WM8993_DC_SERVO_3, hubs->class_w_dcs);
+ snd_soc_write(codec, dcs_reg, hubs->class_w_dcs);
wait_for_dc_servo(codec,
WM8993_DCS_TRIG_DAC_WR_0 |
WM8993_DCS_TRIG_DAC_WR_1);
reg_r = snd_soc_read(codec, WM8993_DC_SERVO_READBACK_2)
& WM8993_DCS_INTEG_CHAN_1_MASK;
break;
+ case 2:
case 1:
- reg = snd_soc_read(codec, WM8993_DC_SERVO_3);
+ reg = snd_soc_read(codec, dcs_reg);
reg_r = (reg & WM8993_DCS_DAC_WR_VAL_1_MASK)
>> WM8993_DCS_DAC_WR_VAL_1_SHIFT;
reg_l = reg & WM8993_DCS_DAC_WR_VAL_0_MASK;
dev_dbg(codec->dev, "DCS input: %x %x\n", reg_l, reg_r);
/* Apply correction to DC servo result */
- if (hubs->dcs_codes) {
- dev_dbg(codec->dev, "Applying %d code DC servo correction\n",
- hubs->dcs_codes);
+ if (hubs->dcs_codes_l || hubs->dcs_codes_r) {
+ dev_dbg(codec->dev,
+ "Applying %d/%d code DC servo correction\n",
+ hubs->dcs_codes_l, hubs->dcs_codes_r);
/* HPOUT1R */
offset = reg_r;
- offset += hubs->dcs_codes;
+ offset += hubs->dcs_codes_r;
dcs_cfg = (u8)offset << WM8993_DCS_DAC_WR_VAL_1_SHIFT;
/* HPOUT1L */
offset = reg_l;
- offset += hubs->dcs_codes;
+ offset += hubs->dcs_codes_l;
dcs_cfg |= (u8)offset;
dev_dbg(codec->dev, "DCS result: %x\n", dcs_cfg);
/* Do it */
- snd_soc_write(codec, WM8993_DC_SERVO_3, dcs_cfg);
+ snd_soc_write(codec, dcs_reg, dcs_cfg);
wait_for_dc_servo(codec,
WM8993_DCS_TRIG_DAC_WR_0 |
WM8993_DCS_TRIG_DAC_WR_1);
struct wm_hubs_data *hubs = snd_soc_codec_get_drvdata(codec);
int ret;
- ret = snd_soc_put_volsw_2r(kcontrol, ucontrol);
+ ret = snd_soc_put_volsw(kcontrol, ucontrol);
/* Updating the analogue gains invalidates the DC servo cache */
hubs->class_w_dcs = 0;
/* If we're applying an offset correction then updating the
* callibration would be likely to introduce further offsets. */
- if (hubs->dcs_codes || hubs->no_series_update)
+ if (hubs->dcs_codes_l || hubs->dcs_codes_r || hubs->no_series_update)
return ret;
/* Only need to do this if the outputs are active */
SOC_ENUM("Speaker Reference", speaker_ref),
SOC_ENUM("Speaker Mode", speaker_mode),
-{
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER, .name = "Headphone Volume",
- .access = SNDRV_CTL_ELEM_ACCESS_TLV_READ |
- SNDRV_CTL_ELEM_ACCESS_READWRITE,
- .tlv.p = outpga_tlv,
- .info = snd_soc_info_volsw_2r,
- .get = snd_soc_get_volsw_2r, .put = wm8993_put_dc_servo,
- .private_value = (unsigned long)&(struct soc_mixer_control) {
- .reg = WM8993_LEFT_OUTPUT_VOLUME,
- .rreg = WM8993_RIGHT_OUTPUT_VOLUME,
- .shift = 0, .max = 63
- },
-},
+SOC_DOUBLE_R_EXT_TLV("Headphone Volume",
+ WM8993_LEFT_OUTPUT_VOLUME, WM8993_RIGHT_OUTPUT_VOLUME,
+ 0, 63, 0, snd_soc_get_volsw, wm8993_put_dc_servo,
+ outpga_tlv),
+
SOC_DOUBLE_R("Headphone Switch", WM8993_LEFT_OUTPUT_VOLUME,
WM8993_RIGHT_OUTPUT_VOLUME, 6, 1, 0),
SOC_DOUBLE_R("Headphone ZC Switch", WM8993_LEFT_OUTPUT_VOLUME,
SND_SOC_DAPM_MIXER("SPKR Boost", SND_SOC_NOPM, 0, 0,
right_speaker_boost, ARRAY_SIZE(right_speaker_boost)),
+SND_SOC_DAPM_SUPPLY("TSHUT", WM8993_POWER_MANAGEMENT_2, 14, 0, NULL, 0),
SND_SOC_DAPM_PGA("SPKL Driver", WM8993_POWER_MANAGEMENT_1, 12, 0,
NULL, 0),
SND_SOC_DAPM_PGA("SPKR Driver", WM8993_POWER_MANAGEMENT_1, 13, 0,
{ "IN1L PGA", "IN1LP Switch", "IN1LP" },
{ "IN1L PGA", "IN1LN Switch", "IN1LN" },
+ { "IN1L PGA", NULL, "VMID" },
+ { "IN1R PGA", NULL, "VMID" },
+ { "IN2L PGA", NULL, "VMID" },
+ { "IN2R PGA", NULL, "VMID" },
+
{ "IN1R PGA", "IN1RP Switch", "IN1RP" },
{ "IN1R PGA", "IN1RN Switch", "IN1RN" },
{ "MIXINL", NULL, "Direct Voice" },
{ "MIXINL", NULL, "IN1LP" },
{ "MIXINL", NULL, "Left Output Mixer" },
+ { "MIXINL", NULL, "VMID" },
{ "MIXINR", "IN1R Switch", "IN1R PGA" },
{ "MIXINR", "IN2R Switch", "IN2R PGA" },
{ "MIXINR", NULL, "Direct Voice" },
{ "MIXINR", NULL, "IN1RP" },
{ "MIXINR", NULL, "Right Output Mixer" },
+ { "MIXINR", NULL, "VMID" },
{ "ADCL", NULL, "MIXINL" },
{ "ADCR", NULL, "MIXINR" },
{ "Earpiece Mixer", "Left Output Switch", "Left Output PGA" },
{ "Earpiece Mixer", "Right Output Switch", "Right Output PGA" },
+ { "Earpiece Driver", NULL, "VMID" },
{ "Earpiece Driver", NULL, "Earpiece Mixer" },
{ "HPOUT2N", NULL, "Earpiece Driver" },
{ "HPOUT2P", NULL, "Earpiece Driver" },
{ "SPKR Boost", "SPKR Switch", "SPKR" },
{ "SPKR Boost", "SPKL Switch", "SPKL" },
+ { "SPKL Driver", NULL, "VMID" },
{ "SPKL Driver", NULL, "SPKL Boost" },
{ "SPKL Driver", NULL, "CLK_SYS" },
+ { "SPKL Driver", NULL, "TSHUT" },
+ { "SPKR Driver", NULL, "VMID" },
{ "SPKR Driver", NULL, "SPKR Boost" },
{ "SPKR Driver", NULL, "CLK_SYS" },
+ { "SPKR Driver", NULL, "TSHUT" },
{ "SPKOUTLP", NULL, "SPKL Driver" },
{ "SPKOUTLN", NULL, "SPKL Driver" },
{ "Headphone PGA", NULL, "Left Headphone Mux" },
{ "Headphone PGA", NULL, "Right Headphone Mux" },
+ { "Headphone PGA", NULL, "VMID" },
{ "Headphone PGA", NULL, "CLK_SYS" },
{ "Headphone PGA", NULL, "Headphone Supply" },
{ "HPOUT1L", NULL, "Headphone PGA" },
{ "HPOUT1R", NULL, "Headphone PGA" },
+ { "LINEOUT1N Driver", NULL, "VMID" },
+ { "LINEOUT1P Driver", NULL, "VMID" },
+ { "LINEOUT2N Driver", NULL, "VMID" },
+ { "LINEOUT2P Driver", NULL, "VMID" },
+
{ "LINEOUT1N", NULL, "LINEOUT1N Driver" },
{ "LINEOUT1P", NULL, "LINEOUT1P Driver" },
{ "LINEOUT2N", NULL, "LINEOUT2N Driver" },
projects / deliverable / linux.git / blobdiff