static int corgi_startup(struct snd_pcm_substream *substream)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_codec *codec = rtd->socdev->card->codec;
+ struct snd_soc_codec *codec = rtd->codec;
/* check the jack status at stream startup */
corgi_ext_control(codec);
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
unsigned int clk = 0;
int ret = 0;
/*
* Logic for a wm8731 as connected on a Sharp SL-C7x0 Device
*/
-static int corgi_wm8731_init(struct snd_soc_codec *codec)
+static int corgi_wm8731_init(struct snd_soc_pcm_runtime *rtd)
{
+ struct snd_soc_codec *codec = rtd->codec;
int err;
snd_soc_dapm_nc_pin(codec, "LLINEIN");
static struct snd_soc_dai_link corgi_dai = {
.name = "WM8731",
.stream_name = "WM8731",
- .cpu_dai = &pxa_i2s_dai,
- .codec_dai = &wm8731_dai,
+ .cpu_dai_name = "pxa-is2-dai",
+ .codec_dai_name = "wm8731-hifi",
+ .platform_name = "pxa-pcm-audio",
+ .codec_name = "wm8731-codec-0.001a",
.init = corgi_wm8731_init,
.ops = &corgi_ops,
};
/* corgi audio machine driver */
static struct snd_soc_card snd_soc_corgi = {
.name = "Corgi",
- .platform = &pxa2xx_soc_platform,
.dai_link = &corgi_dai,
.num_links = 1,
};
-/* corgi audio subsystem */
-static struct snd_soc_device corgi_snd_devdata = {
- .card = &snd_soc_corgi,
- .codec_dev = &soc_codec_dev_wm8731,
-};
-
-/*
- * FIXME: This is a temporary bodge to avoid cross-tree merge issues.
- * New drivers should register the wm8731 I2C device in the machine
- * setup code (under arch/arm for ARM systems).
- */
-static int wm8731_i2c_register(void)
-{
- struct i2c_board_info info;
- struct i2c_adapter *adapter;
- struct i2c_client *client;
-
- memset(&info, 0, sizeof(struct i2c_board_info));
- info.addr = 0x1b;
- strlcpy(info.type, "wm8731", I2C_NAME_SIZE);
-
- adapter = i2c_get_adapter(0);
- if (!adapter) {
- printk(KERN_ERR "can't get i2c adapter 0\n");
- return -ENODEV;
- }
-
- client = i2c_new_device(adapter, &info);
- i2c_put_adapter(adapter);
- if (!client) {
- printk(KERN_ERR "can't add i2c device at 0x%x\n",
- (unsigned int)info.addr);
- return -ENODEV;
- }
-
- return 0;
-}
-
static struct platform_device *corgi_snd_device;
static int __init corgi_init(void)
machine_is_husky()))
return -ENODEV;
- ret = wm8731_i2c_register();
- if (ret != 0)
- return ret;
-
corgi_snd_device = platform_device_alloc("soc-audio", -1);
if (!corgi_snd_device)
return -ENOMEM;
- platform_set_drvdata(corgi_snd_device, &corgi_snd_devdata);
- corgi_snd_devdata.dev = &corgi_snd_device->dev;
+ platform_set_drvdata(corgi_snd_device, &snd_soc_corgi);
ret = platform_device_add(corgi_snd_device);
if (ret)