X-Git-Url: http://drtracing.org/?a=blobdiff_plain;ds=sidebyside;f=gdb%2Fserial.h;h=10b06434198c15d9a7cca00f9eeece705d45c716;hb=b8162e5ac9e052b2a88912b729081600972e854c;hp=abe76b006797b07254f5712b72d73e843c543928;hpb=98bbd631ccdf061b430ff2699ed82b92933ae937;p=deliverable%2Fbinutils-gdb.git
diff --git a/gdb/serial.h b/gdb/serial.h
index abe76b0067..10b0643419 100644
--- a/gdb/serial.h
+++ b/gdb/serial.h
@@ -1,12 +1,11 @@
/* Remote serial support interface definitions for GDB, the GNU Debugger.
- Copyright 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000
- Free Software Foundation, Inc.
+ Copyright (C) 1992-2016 Free Software Foundation, Inc.
This file is part of GDB.
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
+ the Free Software Foundation; either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
@@ -15,73 +14,114 @@
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place - Suite 330,
- Boston, MA 02111-1307, USA. */
+ along with this program. If not, see . */
#ifndef SERIAL_H
#define SERIAL_H
+#ifdef USE_WIN32API
+#include
+#include
+#endif
+
struct ui_file;
/* For most routines, if a failure is indicated, then errno should be
examined. */
/* Terminal state pointer. This is specific to each type of
- interface. */
+ interface. */
typedef void *serial_ttystate;
struct serial;
+struct serial_ops;
+
+/* Create a new serial for OPS. The new serial is not opened. */
/* Try to open NAME. Returns a new `struct serial *' on success, NULL
- on failure. Note that some open calls can block and, if possible,
- should be written to be non-blocking, with calls to ui_look_hook
- so they can be cancelled. An async interface for open could be
- added to GDB if necessary. */
+ on failure. The new serial object has a reference count of 1.
+ Note that some open calls can block and, if possible, should be
+ written to be non-blocking, with calls to ui_look_hook so they can
+ be cancelled. An async interface for open could be added to GDB if
+ necessary. */
extern struct serial *serial_open (const char *name);
+/* Open a new serial stream using OPS. */
+
+extern struct serial *serial_open_ops (const struct serial_ops *ops);
+
+/* Returns true if SCB is open. */
+
+extern int serial_is_open (struct serial *scb);
+
+/* Find an already opened serial stream using a file handle. */
+
+extern struct serial *serial_for_fd (int fd);
+
/* Open a new serial stream using a file handle. */
extern struct serial *serial_fdopen (const int fd);
-/* Push out all buffers, close the device and destroy SCB. */
+/* Push out all buffers, close the device and unref SCB. */
extern void serial_close (struct serial *scb);
+/* Increment reference count of SCB. */
+
+extern void serial_ref (struct serial *scb);
+
+/* Decrement reference count of SCB. */
+
+extern void serial_unref (struct serial *scb);
+
+/* Create a pipe, and put the read end in files[0], and the write end
+ in filde[1]. Returns 0 for success, negative value for error (in
+ which case errno contains the error). */
+
+extern int gdb_pipe (int fildes[2]);
+
+/* Create a pipe with each end wrapped in a `struct serial' interface.
+ Put the read end in scbs[0], and the write end in scbs[1]. Returns
+ 0 for success, negative value for error (in which case errno
+ contains the error). */
+
+extern int serial_pipe (struct serial *scbs[2]);
+
/* Push out all buffers and destroy SCB without closing the device. */
extern void serial_un_fdopen (struct serial *scb);
/* Read one char from the serial device with TIMEOUT seconds to wait
or -1 to wait forever. Use timeout of 0 to effect a poll.
- Infinite waits are not permitted. Returns unsigned char if ok, else
+ Infinite waits are not permitted. Returns unsigned char if ok, else
one of the following codes. Note that all error return-codes are
- guaranteed to be < 0. */
+ guaranteed to be < 0. */
enum serial_rc {
- SERIAL_ERROR = -1, /* General error. */
+ SERIAL_ERROR = -1, /* General error. */
SERIAL_TIMEOUT = -2, /* Timeout or data-not-ready during read.
Unfortunately, through
- deprecated_ui_loop_hook(), this can also be
- a QUIT indication. */
+ deprecated_ui_loop_hook (), this can also
+ be a QUIT indication. */
SERIAL_EOF = -3 /* General end-of-file or remote target
connection closed, indication. Includes
- things like the line dropping dead. */
+ things like the line dropping dead. */
};
extern int serial_readchar (struct serial *scb, int timeout);
-/* Write LEN chars from STRING to the port SCB. Returns 0 for
+/* Write COUNT bytes from BUF to the port SCB. Returns 0 for
success, non-zero for failure. */
-extern int serial_write (struct serial *scb, const char *str, int len);
+extern int serial_write (struct serial *scb, const void *buf, size_t count);
-/* Write a printf style string onto the serial port. */
+/* Write a printf style string onto the serial port. */
-extern void serial_printf (struct serial *desc, const char *,...) ATTR_FORMAT (printf, 2, 3);
+extern void serial_printf (struct serial *desc,
+ const char *,...) ATTRIBUTE_PRINTF (2, 3);
-/* Allow pending output to drain. */
+/* Allow pending output to drain. */
extern int serial_drain_output (struct serial *);
@@ -99,7 +139,7 @@ extern int serial_flush_input (struct serial *);
extern int serial_send_break (struct serial *scb);
-/* Turn the port into raw mode. */
+/* Turn the port into raw mode. */
extern void serial_raw (struct serial *scb);
@@ -108,6 +148,12 @@ extern void serial_raw (struct serial *scb);
extern serial_ttystate serial_get_tty_state (struct serial *scb);
+/* Return a pointer to a newly malloc'd ttystate containing a copy
+ of the state in TTYSTATE. */
+
+extern serial_ttystate serial_copy_tty_state (struct serial *scb,
+ serial_ttystate ttystate);
+
/* Set the state of the tty to TTYSTATE. The change is immediate.
When changing to or from raw mode, input might be discarded.
Returns 0 for success, negative value for error (in which case
@@ -116,10 +162,12 @@ extern serial_ttystate serial_get_tty_state (struct serial *scb);
extern int serial_set_tty_state (struct serial *scb, serial_ttystate ttystate);
/* printf_filtered a user-comprehensible description of ttystate on
- the specified STREAM. FIXME: At present this sends output to the
- default stream - GDB_STDOUT. */
+ the specified STREAM. FIXME: At present this sends output to the
+ default stream - GDB_STDOUT. */
-extern void serial_print_tty_state (struct serial *scb, serial_ttystate ttystate, struct ui_file *);
+extern void serial_print_tty_state (struct serial *scb,
+ serial_ttystate ttystate,
+ struct ui_file *);
/* Set the tty state to NEW_TTYSTATE, where OLD_TTYSTATE is the
current state (generally obtained from a recent call to
@@ -127,7 +175,9 @@ extern void serial_print_tty_state (struct serial *scb, serial_ttystate ttystate
This means that we never switch in or out of raw mode, even if
NEW_TTYSTATE specifies a switch. */
-extern int serial_noflush_set_tty_state (struct serial *scb, serial_ttystate new_ttystate, serial_ttystate old_ttystate);
+extern int serial_noflush_set_tty_state (struct serial *scb,
+ serial_ttystate new_ttystate,
+ serial_ttystate old_ttystate);
/* Set the baudrate to the decimal value supplied. Returns 0 for
success, -1 for failure. */
@@ -138,55 +188,66 @@ extern int serial_setbaudrate (struct serial *scb, int rate);
success, -1 for failure. */
#define SERIAL_1_STOPBITS 1
-#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
+#define SERIAL_1_AND_A_HALF_STOPBITS 2 /* 1.5 bits, snicker... */
#define SERIAL_2_STOPBITS 3
extern int serial_setstopbits (struct serial *scb, int num);
+#define GDBPARITY_NONE 0
+#define GDBPARITY_ODD 1
+#define GDBPARITY_EVEN 2
+
+/* Set parity for serial port. Returns 0 for success, -1 for failure. */
+
+extern int serial_setparity (struct serial *scb, int parity);
+
/* Asynchronous serial interface: */
-/* Can the serial device support asynchronous mode? */
+/* Can the serial device support asynchronous mode? */
extern int serial_can_async_p (struct serial *scb);
-/* Has the serial device been put in asynchronous mode? */
+/* Has the serial device been put in asynchronous mode? */
extern int serial_is_async_p (struct serial *scb);
/* For ASYNC enabled devices, register a callback and enable
asynchronous mode. To disable asynchronous mode, register a NULL
- callback. */
+ callback. */
typedef void (serial_event_ftype) (struct serial *scb, void *context);
-extern void serial_async (struct serial *scb, serial_event_ftype *handler, void *context);
-
-/* Provide direct access to the underlying FD (if any) used to
- implement the serial device. This interface is clearly
- deprecated. Will call internal_error() if the operation isn't
- applicable to the current serial device. */
-
-extern int deprecated_serial_fd (struct serial *scb);
+extern void serial_async (struct serial *scb,
+ serial_event_ftype *handler, void *context);
/* Trace/debug mechanism.
serial_debug() enables/disables internal debugging.
- serial_debug_p() indicates the current debug state. */
+ serial_debug_p() indicates the current debug state. */
extern void serial_debug (struct serial *scb, int debug_p);
extern int serial_debug_p (struct serial *scb);
-/* Details of an instance of a serial object */
+/* Details of an instance of a serial object. */
struct serial
{
+ /* serial objects are ref counted (but not the underlying
+ connection, just the object's lifetime in memory). */
+ int refcnt;
+
int fd; /* File descriptor */
- struct serial_ops *ops; /* Function vector */
+ /* File descriptor for a separate error stream that should be
+ immediately forwarded to gdb_stderr. This may be -1.
+ If != -1, this descriptor should be non-blocking or
+ ops->avail should be non-NULL. */
+ int error_fd;
+ const struct serial_ops *ops; /* Function vector */
void *state; /* Local context info for open FD */
serial_ttystate ttystate; /* Not used (yet) */
int bufcnt; /* Amount of data remaining in receive
- buffer. -ve for sticky errors. */
+ buffer. -ve for sticky errors. */
unsigned char *bufp; /* Current byte */
unsigned char buf[BUFSIZ]; /* Da buffer itself */
int current_timeout; /* (ser-unix.c termio{,s} only), last
@@ -194,11 +255,9 @@ struct serial
int timeout_remaining; /* (ser-unix.c termio{,s} only), we
still need to wait for this many
more seconds. */
- char *name; /* The name of the device or host */
struct serial *next; /* Pointer to the next `struct serial *' */
- int refcnt; /* Number of pointers to this block */
- int debug_p; /* Trace this serial devices operation. */
- int async_state; /* Async internal state. */
+ int debug_p; /* Trace this serial devices operation. */
+ int async_state; /* Async internal state. */
void *async_context; /* Async event thread's context */
serial_event_ftype *async_handler;/* Async event handler */
};
@@ -206,11 +265,11 @@ struct serial
struct serial_ops
{
char *name;
- struct serial_ops *next;
int (*open) (struct serial *, const char *name);
void (*close) (struct serial *);
+ int (*fdopen) (struct serial *, int fd);
int (*readchar) (struct serial *, int timeout);
- int (*write) (struct serial *, const char *str, int len);
+ int (*write) (struct serial *, const void *buf, size_t count);
/* Discard pending output */
int (*flush_output) (struct serial *);
/* Discard pending input */
@@ -218,6 +277,7 @@ struct serial_ops
int (*send_break) (struct serial *);
void (*go_raw) (struct serial *);
serial_ttystate (*get_tty_state) (struct serial *);
+ serial_ttystate (*copy_tty_state) (struct serial *, serial_ttystate);
int (*set_tty_state) (struct serial *, serial_ttystate);
void (*print_tty_state) (struct serial *, serial_ttystate,
struct ui_file *);
@@ -225,20 +285,53 @@ struct serial_ops
serial_ttystate);
int (*setbaudrate) (struct serial *, int rate);
int (*setstopbits) (struct serial *, int num);
- /* Wait for output to drain */
+ /* Set the value PARITY as parity setting for serial object.
+ Return 0 in the case of success. */
+ int (*setparity) (struct serial *, int parity);
+ /* Wait for output to drain. */
int (*drain_output) (struct serial *);
/* Change the serial device into/out of asynchronous mode, call
the specified function when ever there is something
- interesting. */
+ interesting. */
void (*async) (struct serial *scb, int async_p);
+ /* Perform a low-level read operation, reading (at most) COUNT
+ bytes into SCB->BUF. Return zero at end of file. */
+ int (*read_prim)(struct serial *scb, size_t count);
+ /* Perform a low-level write operation, writing (at most) COUNT
+ bytes from BUF. */
+ int (*write_prim)(struct serial *scb, const void *buf, size_t count);
+ /* Return that number of bytes that can be read from FD
+ without blocking. Return value of -1 means that the
+ read will not block even if less that requested bytes
+ are available. */
+ int (*avail)(struct serial *scb, int fd);
+
+#ifdef USE_WIN32API
+ /* Return a handle to wait on, indicating available data from SCB
+ when signaled, in *READ. Return a handle indicating errors
+ in *EXCEPT. */
+ void (*wait_handle) (struct serial *scb, HANDLE *read, HANDLE *except);
+ void (*done_wait_handle) (struct serial *scb);
+#endif /* USE_WIN32API */
};
-/* Add a new serial interface to the interface list */
+/* Add a new serial interface to the interface list. */
+
+extern void serial_add_interface (const struct serial_ops * optable);
+
+/* File in which to record the remote debugging session. */
+
+extern void serial_log_command (struct target_ops *self, const char *);
+
+#ifdef USE_WIN32API
-extern void serial_add_interface (struct serial_ops * optable);
+/* Windows-only: find or create handles that we can wait on for this
+ serial device. */
+extern void serial_wait_handle (struct serial *, HANDLE *, HANDLE *);
-/* File in which to record the remote debugging session */
+/* Windows-only: signal that we are done with the wait handles. */
+extern void serial_done_wait_handle (struct serial *);
-extern void serial_log_command (const char *);
+#endif /* USE_WIN32API */
#endif /* SERIAL_H */