X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=.Sanitize;h=15033a15e23a8c0a257b5671cf867297ffcc1eac;hb=1f302a3bd9dbeacd407ba6e454db1f72c5bb3ba4;hp=a5c3f764c94c1dcd96bda038a5d4bda1350be5c4;hpb=c9b727f9e2d8db4c6ce11efc8dabad1f942362b9;p=deliverable%2Fbinutils-gdb.git

diff --git a/.Sanitize b/.Sanitize
index a5c3f764c9..15033a15e2 100644
--- a/.Sanitize
+++ b/.Sanitize
@@ -51,14 +51,15 @@ keep_these_too="${keep_these_too} .cvsignore CYGNUS autoconf
 	bfd binutils byacc cvs deja-gnu dejagnu diff dosrel dvips emacs emacs19
 	examples expect fileutils findutils flex
 	gas gawk gcc gdb gdbm gdbtest glob gprof grep grez groff guile gzip
-	include inet install.sh ispell
+	include inet install-sh ispell
 	ld less libg++ libgcc libgloss libiberty libio librx libstdc++
-	m4 make mmalloc move-if-change newlib ncurses opcodes
+	m4 make mkinstalldirs mmalloc move-if-change newlib ncurses opcodes
 	pagas patch perl prms
 	rcs readline sed send-pr shellutils sim tar textutils time
 	texinfo tgas utils uudecode wdiff xiberty
 	configure.bat makeall.bat setup.com makefile.vms winsup
-	mpw-README mpw-configure mpw-config.in mpw-build.in mpw-install"
+	mpw-README mpw-configure mpw-config.in mpw-build.in mpw-install
+	ltconfig ltmain.sh missing ylwrap"
 
 lose_these_too="${lose_these_too} testsuite"
 
@@ -70,7 +71,7 @@ else
 	lose_these_too="${lose_these_too} ${cygnus_files}"
 fi
 
-gdbtk_files="tcl tk"
+gdbtk_files="tcl tk itcl tix"
 
 if ( echo $* | grep lose\-gdbtk > /dev/null) ; then
 	lose_these_too="${lose_these_too} ${gdbtk_files}"
@@ -105,6 +106,15 @@ else
 	keep_these_too="${keep_these_too} ${inet_files}"
 fi
 
+ide_files="itcl libide vmake"
+
+if (echo $* | grep keep\-ide > /dev/null); then
+	keep_these_too="${keep_these_too} ${ide_files}"
+	test -n "$verbose" && echo Keeping ${ide_files}
+else
+	lose_these_too="${lose_these_too} ${ide_files}"
+fi
+
 
 # This top-level directory is special.  We often check out only subsets
 # of this directory, and complaining about directories or files we didn't
@@ -205,27 +215,27 @@ else
 fi
 
 if [ -n "${verbose}" ] ; then
-	echo Processing \"arc\"...
+	echo Processing \"d30v\"...
 fi
 
-arc_files="config.sub configure.in config-ml.in"
+d30v_files="ChangeLog config.sub configure.in"
 
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
-	for i in $arc_files ; do
-		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+	for i in $d30v_files ; do
+		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping arc stuff in $i
+				echo Keeping d30v stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"arc\" from $i...
+				echo Removing traces of \"d30v\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+			sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -238,27 +248,27 @@ else
 fi
 
 if [ -n "${verbose}" ] ; then
-	echo Processing \"d10v\"...
+	echo Processing \"v850\"...
 fi
 
-d10v_files="ChangeLog config.sub configure.in"
+v850_files="ChangeLog config.sub configure.in"
 
-if ( echo $* | grep keep\-d10v > /dev/null ) ; then
-	for i in $d10v_files ; do
-		if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
+if ( echo $* | grep keep\-v850 > /dev/null ) ; then
+	for i in $v850_files ; do
+		if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping d10v stuff in $i
+				echo Keeping v850 stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-d10v $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"d10v\" from $i...
+				echo Removing traces of \"v850\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-d10v/,/end-\sanitize\-d10v/d' < $i > new
+			sed '/start\-sanitize\-v850/,/end-\sanitize\-v850/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -269,58 +279,22 @@ else
 		fi
 	done
 fi
-
-if [ -n "${verbose}" ] ; then
-	echo Processing \"m32r\"...
-fi
-
-m32r_files="config.sub configure.in ChangeLog"
-
-if ( echo $* | grep keep\-m32r > /dev/null ) ; then
-	for i in $m32r_files ; do
-		if test ! -d $i && (grep sanitize-m32r $i > /dev/null) ; then
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
+	for i in $v850_files ; do
+		if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping m32r stuff in $i
+				echo Keeping v850e stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-m32r $i > /dev/null) ; then
-			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"m32r\" from $i...
-			fi
-			cp $i new
-			sed '/start\-sanitize\-m32r/,/end-\sanitize\-m32r/d' < $i > new
-			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
-				if [ -n "${verbose}" ] ; then
-					echo Caching $i in .Recover...
-				fi
-				mv $i .Recover
-			fi
-			mv new $i
-		fi
-	done
-fi
-
-rce_files="config.sub"
-
-if ( echo $* | grep keep\-rce > /dev/null ) ; then
-	for i in $rce_files ; do
-		if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
-			if [ -n "${verbose}" ] ; then
-				echo Keeping rce stuff in $i
-			fi
-		fi
-	done
-else
-	for i in $rce_files ; do
-		if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"rce\" from $i...
+				echo Removing traces of \"v850e\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-rce/,/end-\sanitize\-rce/d' < $i > new
+			sed '/start\-sanitize\-v850e/,/end-\sanitize\-v850e/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -331,25 +305,22 @@ else
 		fi
 	done
 fi
-
-v850_files="ChangeLog config.sub configure.in"
-
-if ( echo $* | grep keep\-v850 > /dev/null ) ; then
+if ( echo $* | grep keep\-v850eq > /dev/null ) ; then
 	for i in $v850_files ; do
-		if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-v850eq $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping v850 stuff in $i
+				echo Keeping v850eq stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-v850eq $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"v850\" from $i...
+				echo Removing traces of \"v850eq\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-v850/,/end-\sanitize\-v850/d' < $i > new
+			sed '/start\-sanitize\-v850eq/,/end-\sanitize\-v850eq/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -419,22 +390,6 @@ else
 	done
 fi
 
-if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
-	echo Catering to RMS by removing traces of \"gdbtk\"...
-	if [ -n "${verbose}" ] ; then
-		echo Removing traces of \"gdbtk\" from Makefile.in...
-	fi
-	cp Makefile.in new
-	sed -e '/GDBTK_SUPPORT_DIRS=/d' -e 's/ $(GDBTK_SUPPORT_DIRS)//' < Makefile.in > new
-	if [ -n "${safe}" -a ! -f .Recover/Makefile.in ] ; then
-		if [ -n "${verbose}" ] ; then
-			echo Caching Makefile.in in .Recover...
-		fi
-		mv Makefile.in .Recover
-	fi
-	mv new Makefile.in
-fi
-
 if ( echo $* | grep keep\-gm > /dev/null ) ; then
 	for i in * ; do
 		if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
@@ -462,6 +417,49 @@ else
 	done
 fi
 
+if ( echo $* | grep keep\-ide > /dev/null ) ; then
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping ide stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"ide\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-ide/,/end-\sanitize\-ide/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
+	echo Catering to RMS by removing traces of \"gdbtk\"...
+	if [ -n "${verbose}" ] ; then
+		echo Removing traces of \"gdbtk\" from Makefile.in...
+	fi
+	cp Makefile.in new
+	sed -e '/GDBTK_SUPPORT_DIRS=/d' -e 's/ $(GDBTK_SUPPORT_DIRS)//' < Makefile.in > new
+	if [ -n "${safe}" -a ! -f .Recover/Makefile.in ] ; then
+		if [ -n "${verbose}" ] ; then
+			echo Caching Makefile.in in .Recover...
+		fi
+		mv Makefile.in .Recover
+	fi
+	mv new Makefile.in
+fi
+
 # Do this check LAST!
 for i in * ; do
 	if test ! -d $i && (grep sanitize $i > /dev/null) ; then