X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=.Sanitize;h=cec8a8918cf249285bca066f0dcb728f40e4c4cb;hb=d9eff006a5a83f6c59f6011a744d9e339668a3c8;hp=0af7aad1cfcb7f1cf59a80a10326ab26a721c61f;hpb=ff86eeb590ca82321a62acb7de92d52807623235;p=deliverable%2Fbinutils-gdb.git

diff --git a/.Sanitize b/.Sanitize
index 0af7aad1cf..cec8a8918c 100644
--- a/.Sanitize
+++ b/.Sanitize
@@ -48,17 +48,18 @@ Do-first:
 
 keep_these_too="${keep_these_too} .cvsignore CYGNUS autoconf
 	apache bash 
-	bfd binutils byacc cvs deja-gnu dejagnu diff dosrel dvips emacs emacs19
-	examples expect fileutils findutils flex
-	gas gawk gcc gdb gdbm gdbtest glob gprof grep grez groff guile gzip
-	include inet install.sh ispell
+	bfd binutils bison byacc cvs deja-gnu dejagnu diff dosrel dvips
+	emacs emacs19 examples expect fileutils findutils flex
+	gas gawk gcc gdb gdbm gdbtest glob gperf gprof grep grez groff guile gzip
+	include inet install-sh ispell
 	ld less libg++ libgcc libgloss libiberty libio librx libstdc++
-	m4 make mmalloc move-if-change newlib ncurses opcodes
+	m4 make mkinstalldirs mmalloc move-if-change newlib ncurses opcodes
 	pagas patch perl prms
 	rcs readline sed send-pr shellutils sim tar textutils time
 	texinfo tgas utils uudecode wdiff xiberty
 	configure.bat makeall.bat setup.com makefile.vms winsup
-	mpw-README mpw-configure mpw-config.in mpw-build.in mpw-install"
+	mpw-README mpw-configure mpw-config.in mpw-build.in mpw-install
+	ltconfig ltmain.sh missing ylwrap"
 
 lose_these_too="${lose_these_too} testsuite"
 
@@ -70,7 +71,7 @@ else
 	lose_these_too="${lose_these_too} ${cygnus_files}"
 fi
 
-gdbtk_files="tcl tk"
+gdbtk_files="tcl tk itcl tix"
 
 if ( echo $* | grep lose\-gdbtk > /dev/null) ; then
 	lose_these_too="${lose_these_too} ${gdbtk_files}"
@@ -105,6 +106,15 @@ else
 	keep_these_too="${keep_these_too} ${inet_files}"
 fi
 
+ide_files="itcl libide vmake"
+
+if (echo $* | grep keep\-ide > /dev/null); then
+	keep_these_too="${keep_these_too} ${ide_files}"
+	test -n "$verbose" && echo Keeping ${ide_files}
+else
+	lose_these_too="${lose_these_too} ${ide_files}"
+fi
+
 
 # This top-level directory is special.  We often check out only subsets
 # of this directory, and complaining about directories or files we didn't
@@ -205,27 +215,27 @@ else
 fi
 
 if [ -n "${verbose}" ] ; then
-	echo Processing \"arc\"...
+	echo Processing \"d30v\"...
 fi
 
-arc_files="config.sub configure.in config-ml.in"
+d30v_files="ChangeLog config.sub configure.in"
 
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
-	for i in $arc_files ; do
-		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+	for i in $d30v_files ; do
+		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping arc stuff in $i
+				echo Keeping d30v stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"arc\" from $i...
+				echo Removing traces of \"d30v\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+			sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -238,27 +248,27 @@ else
 fi
 
 if [ -n "${verbose}" ] ; then
-	echo Processing \"d30v\"...
+	echo Processing \"v850\"...
 fi
 
-d30v_files="ChangeLog config.sub configure.in"
+v850_files="ChangeLog config.sub configure.in"
 
-if ( echo $* | grep keep\-d30v > /dev/null ) ; then
-	for i in $d30v_files ; do
-		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
+	for i in $v850_files ; do
+		if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping d30v stuff in $i
+				echo Keeping v850e stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"d30v\" from $i...
+				echo Removing traces of \"v850e\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
+			sed '/start\-sanitize\-v850e/,/end-\sanitize\-v850e/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -270,28 +280,24 @@ else
 	done
 fi
 
-if [ -n "${verbose}" ] ; then
-	echo Processing \"v850\"...
-fi
-
-v850_files="ChangeLog config.sub configure.in"
+r5900_files="ChangeLog config.sub configure.in"
 
-if ( echo $* | grep keep\-v850 > /dev/null ) ; then
-	for i in $v850_files ; do
-		if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
+	for i in $r5900_files ; do
+		if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping v850 stuff in $i
+				echo Keeping r5900 stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-v850 $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"v850\" from $i...
+				echo Removing traces of \"r5900\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-v850/,/end-\sanitize\-v850/d' < $i > new
+			sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -303,24 +309,24 @@ else
 	done
 fi
 
-r5900_files="ChangeLog config.sub configure.in"
+tx19_files="ChangeLog config.sub"
 
-if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
-	for i in $r5900_files ; do
-		if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+if ( echo $* | grep keep\-tx19 > /dev/null ) ; then
+	for i in $tx19_files ; do
+		if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping r5900 stuff in $i
+				echo Keeping tx19 stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"r5900\" from $i...
+				echo Removing traces of \"tx19\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
+			sed '/start\-sanitize\-tx19/,/end-\sanitize\-tx19/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -361,22 +367,6 @@ else
 	done
 fi
 
-if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
-	echo Catering to RMS by removing traces of \"gdbtk\"...
-	if [ -n "${verbose}" ] ; then
-		echo Removing traces of \"gdbtk\" from Makefile.in...
-	fi
-	cp Makefile.in new
-	sed -e '/GDBTK_SUPPORT_DIRS=/d' -e 's/ $(GDBTK_SUPPORT_DIRS)//' < Makefile.in > new
-	if [ -n "${safe}" -a ! -f .Recover/Makefile.in ] ; then
-		if [ -n "${verbose}" ] ; then
-			echo Caching Makefile.in in .Recover...
-		fi
-		mv Makefile.in .Recover
-	fi
-	mv new Makefile.in
-fi
-
 if ( echo $* | grep keep\-gm > /dev/null ) ; then
 	for i in * ; do
 		if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
@@ -404,6 +394,49 @@ else
 	done
 fi
 
+if ( echo $* | grep keep\-ide > /dev/null ) ; then
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping ide stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"ide\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-ide/,/end-\sanitize\-ide/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
+	echo Catering to RMS by removing traces of \"gdbtk\"...
+	if [ -n "${verbose}" ] ; then
+		echo Removing traces of \"gdbtk\" from Makefile.in...
+	fi
+	cp Makefile.in new
+	sed -e '/GDBTK_SUPPORT_DIRS=/d' -e 's/ $(GDBTK_SUPPORT_DIRS)//' < Makefile.in > new
+	if [ -n "${safe}" -a ! -f .Recover/Makefile.in ] ; then
+		if [ -n "${verbose}" ] ; then
+			echo Caching Makefile.in in .Recover...
+		fi
+		mv Makefile.in .Recover
+	fi
+	mv new Makefile.in
+fi
+
 # Do this check LAST!
 for i in * ; do
 	if test ! -d $i && (grep sanitize $i > /dev/null) ; then