X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=.Sanitize;h=d2b2884617393eeb0d3e695bfa645d2ef8be9179;hb=ebde3f62352e9f20cd9f0cc7e6e98faa58052739;hp=e6252f9d0450f8ac08fb019db34b6e9398e132ef;hpb=5f917df14d2b82a4323f28f84e494b1060759d18;p=deliverable%2Fbinutils-gdb.git

diff --git a/.Sanitize b/.Sanitize
index e6252f9d04..d2b2884617 100644
--- a/.Sanitize
+++ b/.Sanitize
@@ -47,17 +47,21 @@
 Do-first:
 
 keep_these_too="${keep_these_too} .cvsignore CYGNUS autoconf
-	bfd binutils byacc cvs deja-gnu dejagnu diff dosrel dvips emacs emacs19
-	examples expect fileutils flex
-	gas gcc gdb gdbm gdbtest glob gprof grep grez groff
-	include install.sh ispell
-	ld libg++ libgcc libgloss libiberty libio librx libstdc++
-	m4 make mmalloc move-if-change newlib opcodes
-	pagas patch prms rcs readline sed send-pr shellutils sim textutils
+	apache bash 
+	bfd binutils bison byacc cvs deja-gnu dejagnu diff dosrel dvips
+	emacs emacs19 examples expect fileutils findutils flex
+	gas gawk gcc gdb gdbm gdbtest glob gperf gprof grep grez groff
+	guile gzip
+	include inet install-sh ispell
+	ld less libg++ libgcc libgloss libiberty libio
+	librx libstdc++
+	m4 make mkinstalldirs mmalloc move-if-change newlib ncurses opcodes
+	pagas patch perl prms
+	rcs readline sed send-pr shellutils sim tar textutils time
 	texinfo tgas utils uudecode wdiff xiberty
-	configure.bat makeall.bat winsup
-	guile perl
-	mpw-README mpw-configure mpw-config.in mpw-build.in"
+	configure.bat makeall.bat setup.com makefile.vms winsup
+	mpw-README mpw-configure mpw-config.in mpw-build.in mpw-install
+	ltconfig ltmain.sh missing ylwrap"
 
 lose_these_too="${lose_these_too} testsuite"
 
@@ -69,7 +73,7 @@ else
 	lose_these_too="${lose_these_too} ${cygnus_files}"
 fi
 
-gdbtk_files="tcl tk"
+gdbtk_files="tcl tk itcl tix libgui"
 
 if ( echo $* | grep lose\-gdbtk > /dev/null) ; then
 	lose_these_too="${lose_these_too} ${gdbtk_files}"
@@ -95,6 +99,25 @@ else
 	true; # Let keep-cygnus handle it.
 fi
 
+# IDK releases don't include files which only matter to CDK.
+inet_files="COPYING.LIB config config-ml.in etc symlink-tree"
+
+if (echo $* | grep keep\-inet > /dev/null); then
+	lose_these_too="${lose_these_too} ${inet_files}"
+else
+	keep_these_too="${keep_these_too} ${inet_files}"
+fi
+
+ide_files="libide vmake jstools"
+
+if (echo $* | grep keep\-ide > /dev/null); then
+	keep_these_too="${keep_these_too} ${ide_files}"
+	test -n "$verbose" && echo Keeping ${ide_files}
+else
+	lose_these_too="${lose_these_too} ${ide_files}"
+fi
+
+
 # This top-level directory is special.  We often check out only subsets
 # of this directory, and complaining about directories or files we didn't
 # check out just gets obnoxious.
@@ -126,21 +149,19 @@ done
 Things-to-keep:
 
 COPYING
-COPYING.LIB
 ChangeLog
 Makefile.in
 README
-config
-config-ml.in
 config.guess
 config.sub
 configure
 configure.in
-etc
-symlink-tree
 
 Things-to-lose:
 
+# Not sure we want to include mkdep in releases yet.
+mkdep
+
 # The lines between the "Do-last:" line and the end of the file
 # are executed as a /bin/sh shell script after everything else is
 # done.
@@ -199,27 +220,118 @@ else
 fi
 
 if [ -n "${verbose}" ] ; then
-	echo Processing \"arc\"...
+	echo Processing \"d30v\"...
+fi
+
+d30v_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-d30v > /dev/null ) ; then
+	for i in $d30v_files ; do
+		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping d30v stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-d30v $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"d30v\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-d30v/,/end-\sanitize\-d30v/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+if [ -n "${verbose}" ] ; then
+	echo Processing \"v850\"...
+fi
+
+v850_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-v850e > /dev/null ) ; then
+	for i in $v850_files ; do
+		if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping v850e stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-v850e $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"v850e\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-v850e/,/end-\sanitize\-v850e/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+r5900_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-r5900 > /dev/null ) ; then
+	for i in $r5900_files ; do
+		if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping r5900 stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-r5900 $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"r5900\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-r5900/,/end-\sanitize\-r5900/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
 fi
 
-arc_files="config.sub configure.in config-ml.in"
+tx19_files="ChangeLog config.sub"
 
-if ( echo $* | grep keep\-arc > /dev/null ) ; then
-	for i in $arc_files ; do
-		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+if ( echo $* | grep keep\-tx19 > /dev/null ) ; then
+	for i in $tx19_files ; do
+		if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping arc stuff in $i
+				echo Keeping tx19 stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-arc $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-tx19 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"arc\" from $i...
+				echo Removing traces of \"tx19\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-arc/,/end-\sanitize\-arc/d' < $i > new
+			sed '/start\-sanitize\-tx19/,/end-\sanitize\-tx19/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -231,24 +343,24 @@ else
 	done
 fi
 
-rce_files="config.sub"
+tx49_files="ChangeLog config.sub"
 
-if ( echo $* | grep keep\-rce > /dev/null ) ; then
-	for i in $rce_files ; do
-		if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+if ( echo $* | grep keep\-tx49 > /dev/null ) ; then
+	for i in $tx49_files ; do
+		if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping rce stuff in $i
+				echo Keeping tx49 stuff in $i
 			fi
 		fi
 	done
 else
-	for i in $rce_files ; do
-		if test ! -d $i && (grep sanitize-rce $i > /dev/null) ; then
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-tx49 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"rce\" from $i...
+				echo Removing traces of \"tx49\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-rce/,/end-\sanitize\-rce/d' < $i > new
+			sed '/start\-sanitize\-tx49/,/end-\sanitize\-tx49/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -260,23 +372,24 @@ else
 	done
 fi
 
-sh3e_files="ChangeLog config-ml.in"
-if ( echo $* | grep keep\-sh3e > /dev/null ) ; then
-	for i in $sh3e_files ; do
-		if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
+tic80_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-tic80 > /dev/null ) ; then
+	for i in $tic80_files ; do
+		if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping sh3e stuff in $i
+				echo Keeping tic80 stuff in $i
 			fi
 		fi
 	done
 else
-	for i in $sh3e_files ; do
-		if test ! -d $i && (grep sanitize-sh3e $i > /dev/null) ; then
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-tic80 $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"sh3e\" from $i...
+				echo Removing traces of \"tic80\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-sh3e/,/end-\sanitize\-sh3e/d' < $i > new
+			sed '/start\-sanitize\-tic80/,/end-\sanitize\-tic80/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...
@@ -288,6 +401,61 @@ else
 	done
 fi
 
+sky_files="ChangeLog config.sub configure.in"
+
+if ( echo $* | grep keep\-sky > /dev/null ) ; then
+	for i in $sky_files ; do
+		if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping sky stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-sky $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"sky\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-sky/,/end-\sanitize\-sky/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+if ( echo $* | grep keep\-ide > /dev/null ) ; then
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping ide stuff in $i
+			fi
+		fi
+	done
+else
+	for i in * ; do
+		if test ! -d $i && (grep sanitize-ide $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"ide\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-ide/,/end-\sanitize\-ide/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
 
 if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
 	echo Catering to RMS by removing traces of \"gdbtk\"...
@@ -305,22 +473,52 @@ if ( echo $* | grep lose\-gdbtk > /dev/null ) ; then
 	mv new Makefile.in
 fi
 
-if ( echo $* | grep keep\-gm > /dev/null ) ; then
+vr5400_files="ChangeLog config.sub"
+
+if ( echo $* | grep keep\-vr5400 > /dev/null ) ; then
+	for i in $vr5400_files ; do
+		if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Keeping vr5400 stuff in $i
+			fi
+		fi
+	done
+else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-vr5400 $i > /dev/null) ; then
+			if [ -n "${verbose}" ] ; then
+				echo Removing traces of \"vr5400\" from $i...
+			fi
+			cp $i new
+			sed '/start\-sanitize\-vr5400/,/end-\sanitize\-vr5400/d' < $i > new
+			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
+				if [ -n "${verbose}" ] ; then
+					echo Caching $i in .Recover...
+				fi
+				mv $i .Recover
+			fi
+			mv new $i
+		fi
+	done
+fi
+
+m32rx_files="ChangeLog config-ml.in"
+if ( echo $* | grep keep\-m32rx > /dev/null ) ; then
+	for i in $m32rx_files ; do
+		if test ! -d $i && (grep sanitize-m32rx $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Keeping gm stuff in $i
+				echo Keeping m32rx stuff in $i
 			fi
 		fi
 	done
 else
 	for i in * ; do
-		if test ! -d $i && (grep sanitize-gm $i > /dev/null) ; then
+		if test ! -d $i && (grep sanitize-m32rx $i > /dev/null) ; then
 			if [ -n "${verbose}" ] ; then
-				echo Removing traces of \"gm\" from $i...
+				echo Removing traces of \"m32rx\" from $i...
 			fi
 			cp $i new
-			sed '/start\-sanitize\-gm/,/end-\sanitize\-gm/d' < $i > new
+			sed '/start\-sanitize\-m32rx/,/end-\sanitize\-m32rx/d' < $i > new
 			if [ -n "${safe}" -a ! -f .Recover/$i ] ; then
 				if [ -n "${verbose}" ] ; then
 					echo Caching $i in .Recover...