X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=Makefile.in;h=daa7fbe1bb1c2f19d0cae04c63e183838efae2c9;hb=caa740beb84d3e73cf48991baa02b0fd0c04811b;hp=844ecb2edec0b785a2026da7cbca1cb2bbb3c920;hpb=96bfa6120dffcf27c1f0cc0fb8c1fca63f86869d;p=deliverable%2Fbinutils-gdb.git diff --git a/Makefile.in b/Makefile.in index 844ecb2ede..daa7fbe1bb 100644 --- a/Makefile.in +++ b/Makefile.in @@ -14,7 +14,7 @@ # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software -# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # srcdir = . @@ -42,46 +42,79 @@ man9dir = $(mandir)/man9 infodir = $(prefix)/info includedir = $(prefix)/include docdir = $(datadir)/doc +GDB_NLM_DEPS = SHELL = /bin/sh -INSTALL = cp +INSTALL = $${srcroot}/install.sh -c INSTALL_PROGRAM = $(INSTALL) -INSTALL_DATA = $(INSTALL) +INSTALL_DATA = $(INSTALL) -m 644 +INSTALL_XFORM = $(INSTALL) -t='$(program_transform_name)' + +INSTALL_DOSREL = install-dosrel-fake AS = as AR = ar AR_FLAGS = rc CC = cc + +# Special variables passed down in EXTRA_GCC_FLAGS. They are defined +# here so that they can be overridden by Makefile fragments. +HOST_CC = $(CC_FOR_BUILD) +HOST_PREFIX = +HOST_PREFIX_1 = loser- + +# We don't specify -g -O because many compilers don't support -g -O, +# and/or -O is broken in and of itself. CFLAGS = -g +LIBCFLAGS = $(CFLAGS) +CFLAGS_FOR_TARGET = $(CFLAGS) +LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET) +PICFLAG = +PICFLAG_FOR_TARGET = + # start-sanitize-chill CHILLFLAGS = $(CFLAGS) CHILL_LIB = -lchill # end-sanitize-chill CXX = gcc -CXXFLAGS = -g -O + +# Use -O2 to stress test the compiler. +CXXFLAGS = -g -O2 +LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates +CXXFLAGS_FOR_TARGET = $(CXXFLAGS) +LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates + RANLIB = ranlib NM = nm -MUNCH_NM = $(NM) -GZIP = gzip -COMPRESS = compress +# Not plain GZIP, since gzip looks there for extra command-line options. +GZIPPROG = gzip # BISON: This line sed'ed to BISON = bison -y for FSF releases, don't remove. -BISON = `if [ -f $${rootme}/byacc/byacc ] ; \ - then echo $${rootme}/byacc/byacc ; \ +BISON = `if [ -f $$r/byacc/byacc ] ; \ + then echo $$r/byacc/byacc ; \ else echo byacc ; \ fi` -LEX = `if [ -f $${rootme}/flex/flex ] ; \ - then echo $${rootme}/flex/flex ; \ +LEX = `if [ -f $$r/flex/flex ] ; \ + then echo $$r/flex/flex ; \ else echo flex ; fi` -MAKEINFO = `if [ -f $${rootme}/texinfo/makeinfo/makeinfo ] ; \ - then echo $${rootme}/texinfo/makeinfo/makeinfo ; \ +M4 = `if [ -f $$r/m4/m4 ] ; \ + then echo $$r/m4/m4 ; \ + else echo m4 ; fi` + +MAKEINFO = `if [ -f $$r/texinfo/makeinfo/makeinfo ] ; \ + then echo $$r/texinfo/makeinfo/makeinfo ; \ else echo makeinfo ; fi` -EXPECT = `if [ -f $${rootme}/expect/expect ] ; \ - then echo $${rootme}/expect/expect ; \ +# This just becomes part of the MAKEINFO definition passed down to +# sub-makes. It lets flags be given on the command line while still +# using the makeinfo from the object tree. +MAKEINFOFLAGS = + +EXPECT = `if [ -f $$r/expect/expect ] ; \ + then echo $$r/expect/expect ; \ else echo expect ; fi` RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \ @@ -89,9 +122,6 @@ RUNTEST = `if [ -f $${srcroot}/dejagnu/runtest ] ; \ else echo runtest ; fi` -# libraries that may need to be augmented on a system-by-system basis -X11_LIB = -lX11 - # compilers to use to create programs which must be run in the build # environment. CC_FOR_BUILD = $(CC) @@ -100,103 +130,135 @@ CXX_FOR_BUILD = $(CXX) SUBDIRS = "this is set via configure, don't edit this" OTHERS = +# This is set by the configure script to the list of directories which +# should be built using the target tools. +TARGET_CONFIGDIRS = libiberty libgloss newlib libio librx libstdc++ libg++ winsup + +# Target libraries are put under this directory: +TARGET_SUBDIR = . # Changed by configure to $(target_alias) if cross. + +# This is set by the configure script to the arguments passed to configure. +CONFIG_ARGUMENTS = + ALL = all.normal -INSTALL_TARGET = install-dirs $(INSTALL_MODULES) $(INSTALL_TARGET_MODULES) $(INSTALL_X11_MODULES) +INSTALL_TARGET = install-dirs \ + $(INSTALL_MODULES) \ + $(INSTALL_TARGET_MODULES) \ + $(INSTALL_X11_MODULES) \ + install-gcc \ + $(INSTALL_DOSREL) + CC_FOR_TARGET = ` \ - if [ -f $${rootme}/gcc/Makefile ] ; then \ - echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \ + if [ -f $$r/gcc/Makefile ] ; then \ + if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \ + echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \ + else \ + echo $$r/gcc/xgcc -B$$r/gcc/; \ + fi; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CC); \ else \ - t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ + t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \ fi; \ fi` # start-sanitize-chill CHILL_FOR_TARGET = ` \ - if [ -f $${rootme}/gcc/Makefile ] ; then \ - echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/ -L$${rootme}/chillrt/; \ + if [ -f $$r/gcc/Makefile ] ; then \ + echo $$r/gcc/xgcc -B$$r/gcc/ -L$$r/gcc/ch/runtime/; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CC); \ else \ - t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ + t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \ fi; \ fi` # end-sanitize-chill CXX_FOR_TARGET = ` \ - if [ -f $${rootme}/gcc/Makefile ] ; then \ - echo $${rootme}/gcc/xgcc -B$${rootme}/gcc/; \ + if [ -f $$r/gcc/Makefile ] ; then \ + if [ -f $$r/$(TARGET_SUBDIR)/newlib/Makefile ] ; then \ + echo $$r/gcc/xgcc -B$$r/gcc/ -idirafter $$r/$(TARGET_SUBDIR)/newlib/targ-include -idirafter $${srcroot}/newlib/libc/include -nostdinc; \ + else \ + echo $$r/gcc/xgcc -B$$r/gcc/; \ + fi; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(CXX); \ else \ - t='$(program_transform_name)'; echo gcc | sed -e '' $$t; \ + t='$(program_transform_name)'; echo gcc | sed -e 's/x/x/' $$t; \ fi; \ fi` AS_FOR_TARGET = ` \ - if [ -f $${rootme}/gas/Makefile ] ; then \ - echo $${rootme}/gas/as.new ; \ + if [ -f $$r/gas/as.new ] ; then \ + echo $$r/gas/as.new ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(AS); \ else \ - t='$(program_transform_name)'; echo as | sed -e '' $$t ; \ + t='$(program_transform_name)'; echo as | sed -e 's/x/x/' $$t ; \ + fi; \ + fi` + +LD_FOR_TARGET = ` \ + if [ -f $$r/ld/ld.new ] ; then \ + echo $$r/ld/ld.new ; \ + else \ + if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + echo $(LD); \ + else \ + t='$(program_transform_name)'; echo ld | sed -e 's/x/x/' $$t ; \ + fi; \ + fi` + +DLLTOOL_FOR_TARGET = ` \ + if [ -f $$r/binutils/dlltool ] ; then \ + echo $$r/binutils/dlltool ; \ + else \ + if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + echo $(DLLTOOL); \ + else \ + t='$(program_transform_name)'; echo dlltool | sed -e 's/x/x/' $$t ; \ fi; \ fi` AR_FOR_TARGET = ` \ - if [ -f $${rootme}/binutils/Makefile ] ; then \ - echo $${rootme}/binutils/ar ; \ + if [ -f $$r/binutils/ar ] ; then \ + echo $$r/binutils/ar ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(AR); \ else \ - t='$(program_transform_name)'; echo ar | sed -e '' $$t ; \ + t='$(program_transform_name)'; echo ar | sed -e 's/x/x/' $$t ; \ fi; \ fi` RANLIB_FOR_TARGET = ` \ - if [ -f $${rootme}/binutils/Makefile ] ; then \ - echo $${rootme}/binutils/ranlib ; \ + if [ -f $$r/binutils/ranlib ] ; then \ + echo $$r/binutils/ranlib ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(RANLIB); \ else \ - t='$(program_transform_name)'; echo ranlib | sed -e '' $$t ; \ + t='$(program_transform_name)'; echo ranlib | sed -e 's/x/x/' $$t ; \ fi; \ fi` NM_FOR_TARGET = ` \ - if [ -f $${rootme}/binutils/Makefile ] ; then \ - echo $${rootme}/binutils/nm ; \ + if [ -f $$r/binutils/nm.new ] ; then \ + echo $$r/binutils/nm.new ; \ else \ if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ echo $(NM); \ else \ - t='$(program_transform_name)'; echo nm | sed -e '' $$t ; \ + t='$(program_transform_name)'; echo nm | sed -e 's/x/x/' $$t ; \ fi; \ fi` -# FIXME: This is badly named. -XTRAFLAGS = ` \ - if [ -f $${rootme}/gcc/Makefile ] ; then \ - if [ -f $${rootme}/newlib/Makefile ] ; then \ - echo -I$${rootme}/newlib/targ-include -I$${srcroot}/newlib/libc/include -I$${rootme}/gcc/include -nostdinc ; \ - else \ - echo -I$${rootme}/gcc/include ; \ - fi ; \ - else \ - echo ; \ - fi` - -PRMS = all-prms - #### host and target specific makefile fragments come in here. ### @@ -210,6 +272,7 @@ BASE_FLAGS_TO_PASS = \ "CC_FOR_BUILD=$(CC_FOR_BUILD)" \ "CC_FOR_TARGET=$(CC_FOR_TARGET)" \ "CFLAGS=$(CFLAGS)" \ + "CFLAGS_FOR_TARGET=$(CFLAGS_FOR_TARGET)" \ $(start-sanitize-chill)\ "CHILLFLAGS=$(CHILLFLAGS)" \ "CHILL_FOR_TARGET=$(CHILL_FOR_TARGET)" \ @@ -217,23 +280,32 @@ BASE_FLAGS_TO_PASS = \ $(end-sanitize-chill)\ "CXX_FOR_BUILD=$(CXX_FOR_BUILD)" \ "CXXFLAGS=$(CXXFLAGS)" \ + "CXXFLAGS_FOR_TARGET=$(CXXFLAGS_FOR_TARGET)" \ "CXX_FOR_TARGET=$(CXX_FOR_TARGET)" \ - 'GCC_FOR_TARGET=$$(CC_FOR_TARGET)' \ + "DLLTOOL_FOR_TARGET=$(DLLTOOL_FOR_TARGET)" \ + "GCC_FOR_TARGET=$(CC_FOR_TARGET)" \ "INSTALL=$(INSTALL)" \ "INSTALL_DATA=$(INSTALL_DATA)" \ "INSTALL_PROGRAM=$(INSTALL_PROGRAM)" \ + "INSTALL_XFORM=$(INSTALL_XFORM)" \ "LDFLAGS=$(LDFLAGS)" \ "LEX=$(LEX)" \ - "LOADLIBES=$(LOADLIBES)" \ - "MAKEINFO=$(MAKEINFO)" \ - "MUNCH_NM=$(MUNCH_NM)" \ + "LD_FOR_TARGET=$(LD_FOR_TARGET)" \ + "LIBCFLAGS=$(LIBCFLAGS)" \ + "LIBCFLAGS_FOR_TARGET=$(LIBCFLAGS_FOR_TARGET)" \ + "LIBCXXFLAGS=$(LIBCXXFLAGS)" \ + "LIBCXXFLAGS_FOR_TARGET=$(LIBCXXFLAGS_FOR_TARGET)" \ + "M4=$(M4)" \ + "MAKEINFO=$(MAKEINFO) $(MAKEINFOFLAGS)" \ "NM_FOR_TARGET=$(NM_FOR_TARGET)" \ - "PRMS=$(PRMS)" \ + "PICFLAG=$(PICFLAG)" \ + "PICFLAG_FOR_TARGET=$(PICFLAG_FOR_TARGET)" \ "RANLIB_FOR_TARGET=$(RANLIB_FOR_TARGET)" \ + "SHELL=$(SHELL)" \ "EXPECT=$(EXPECT)" \ "RUNTEST=$(RUNTEST)" \ "RUNTESTFLAGS=$(RUNTESTFLAGS)" \ - "XTRAFLAGS_FOR_TARGET=$(XTRAFLAGS)" \ + "YACC=$(BISON)" \ "exec_prefix=$(exec_prefix)" \ "prefix=$(prefix)" \ "tooldir=$(tooldir)" @@ -247,17 +319,21 @@ EXTRA_HOST_FLAGS = \ 'CC=$(CC)' \ 'CXX=$(CXX)' \ 'NM=$(NM)' \ - 'RANLIB=$(RANLIB)' \ - 'XTRAFLAGS=' + 'RANLIB=$(RANLIB)' FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) # Flags that are concerned with the location of the X11 include files # and library files +# +# NOTE: until the top-level is getting the values via autoconf, it only +# causes problems to have this top-level Makefile overriding the autoconf-set +# values in child directories. Only variables that don't conflict with +# autoconf'ed ones should be passed by X11_FLAGS_TO_PASS for now. +# X11_FLAGS_TO_PASS = \ - "X11_INCLUDE_FLAGS=$(X11_INCLUDE_FLAGS)" \ - "X11_LIB_FLAGS=$(X11_LIB_FLAGS)" \ - "X11_LIB=$(X11_LIB)" + 'X11_EXTRA_CFLAGS=$(X11_EXTRA_CFLAGS)' \ + 'X11_EXTRA_LIBS=$(X11_EXTRA_LIBS)' # Flags to pass down to makes which are built with the target environment. # The double $ decreases the length of the command line; the variables @@ -267,10 +343,16 @@ EXTRA_TARGET_FLAGS = \ 'AR=$$(AR_FOR_TARGET)' \ 'AS=$$(AS_FOR_TARGET)' \ 'CC=$$(CC_FOR_TARGET)' \ + 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \ 'CXX=$$(CXX_FOR_TARGET)' \ + 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \ + 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \ + 'LD=$$(LD_FOR_TARGET)' \ + 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \ + 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \ 'NM=$$(NM_FOR_TARGET)' \ - 'RANLIB=$$(RANLIB_FOR_TARGET)' \ - 'XTRAFLAGS=$$(XTRAFLAGS_FOR_TARGET)' + 'PICFLAG=$$(PICFLAG_FOR_TARGET)' \ + 'RANLIB=$$(RANLIB_FOR_TARGET)' TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS) @@ -280,9 +362,6 @@ TARGET_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_TARGET_FLAGS) # If any variables are added here, they must be added to do-*, below. # The HOST_* variables are a special case, which are used for the gcc # cross-building scheme. -HOST_CC = $(CC_FOR_BUILD) -HOST_PREFIX = -HOST_PREFIX_1 = loser- EXTRA_GCC_FLAGS = \ 'AR=$$(AR_FOR_TARGET)' \ 'AS=$(AS)' \ @@ -292,8 +371,7 @@ EXTRA_GCC_FLAGS = \ 'HOST_PREFIX=$(HOST_PREFIX)' \ 'HOST_PREFIX_1=$(HOST_PREFIX_1)' \ 'NM=$(NM)' \ - 'RANLIB=$$(RANLIB_FOR_TARGET)' \ - 'XTRAFLAGS=' + 'RANLIB=$$(RANLIB_FOR_TARGET)' GCC_FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_GCC_FLAGS) @@ -307,15 +385,16 @@ ALL_MODULES = \ all-cvs \ all-dejagnu \ all-diff \ + all-dosutils \ all-etc \ all-fileutils \ all-find \ all-flex \ all-gas \ all-gawk \ - all-gdb \ all-gprof \ all-grep \ + all-grez \ all-gzip \ all-hello \ all-indent \ @@ -343,25 +422,32 @@ ALL_MODULES = \ all-tgas \ all-time \ all-uudecode \ - all-wdiff + all-wdiff # This is a list of the check targets for all of the modules which are # compiled using $(FLAGS_TO_PASS). -CHECK_MODULES = \ +# This is a list of the check targets for all of the modules which are +# compiled using $(FLAGS_TO_PASS). +# +# The list is in two parts. The first lists those tools which +# are tested as part of the host's native tool-chain, and not +# tested in a cross configuration. +NATIVE_CHECK_MODULES = \ + check-byacc \ + check-flex + +CROSS_CHECK_MODULES = \ check-autoconf \ check-bfd \ check-binutils \ - check-byacc \ check-cvs \ check-dejagnu \ check-diff \ check-etc \ check-fileutils \ check-find \ - check-flex \ check-gas \ check-gawk \ - check-gdb \ check-gprof \ check-grep \ check-gzip \ @@ -392,6 +478,8 @@ CHECK_MODULES = \ check-uudecode \ check-wdiff +CHECK_MODULES=$(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES) + # This is a list of the install targets for all of the modules which are # compiled using $(FLAGS_TO_PASS). INSTALL_MODULES = \ @@ -402,16 +490,16 @@ INSTALL_MODULES = \ install-cvs \ install-dejagnu \ install-diff \ + install-dosutils \ install-etc \ install-fileutils \ install-find \ install-flex \ install-gas \ install-gawk \ - install-gdb \ - install-glob \ install-gprof \ install-grep \ + install-grez \ install-gzip \ install-hello \ install-indent \ @@ -444,7 +532,10 @@ INSTALL_MODULES = \ # using $(X11_FLAGS_TO_PASS). ALL_X11_MODULES = \ all-emacs \ + all-emacs19 \ + all-gdb \ all-expect \ + all-gash \ all-tclX \ all-tk @@ -452,7 +543,9 @@ ALL_X11_MODULES = \ # compiled using $(X11_FLAGS_TO_PASS). CHECK_X11_MODULES = \ check-emacs \ + check-gdb \ check-expect \ + check-gash \ check-tclX \ check-tk @@ -460,49 +553,60 @@ CHECK_X11_MODULES = \ # compiled using $(X11_FLAGS_TO_PASS). INSTALL_X11_MODULES = \ install-emacs \ + install-emacs19 \ + install-gdb \ install-expect \ + install-gash \ install-tclX \ install-tk # This is a list of the targets for all of the modules which are compiled # using $(TARGET_FLAGS_TO_PASS). ALL_TARGET_MODULES = \ - $(start-sanitize-chill) \ - all-chillrt \ - $(end-sanitize-chill) \ - all-libg++ \ - all-newlib \ - all-xiberty + all-target-libio \ + all-target-libstdc++ \ + all-target-librx \ + all-target-libg++ \ + all-target-newlib \ + all-target-winsup \ + all-target-libgloss \ + all-target-libiberty + +# This is a list of the configure targets for all of the modules which +# are compiled using the target tools. +CONFIGURE_TARGET_MODULES = \ + configure-target-libio \ + configure-target-libstdc++ \ + configure-target-librx \ + configure-target-libg++ \ + configure-target-newlib \ + configure-target-winsup \ + configure-target-libgloss \ + configure-target-libiberty # This is a list of the check targets for all of the modules which are # compiled using $(TARGET_FLAGS_TO_PASS). CHECK_TARGET_MODULES = \ - $(start-sanitize-chill) \ - check-chillrt \ - $(end-sanitize-chill) \ - check-libg++ \ - check-newlib \ - check-xiberty + check-target-libio \ + check-target-libstdc++ \ + check-target-libg++ \ + check-target-newlib \ + check-target-winsup \ + check-target-libiberty # This is a list of the install targets for all of the modules which are # compiled using $(TARGET_FLAGS_TO_PASS). INSTALL_TARGET_MODULES = \ - $(start-sanitize-chill) \ - install-chillrt \ - $(end-sanitize-chill) \ - install-libg++ \ - install-newlib \ - install-xiberty - -# This is a shell case of all modules which are compiled using -# $(TARGET_FLAGS_TO_PASS), used in the do-X rule. -TARGET_LIBS = libg++ | newlib | xiberty -# start-sanitize-chill -TARGET_LIBS = chillrt | libg++ | newlib | xiberty -# end-sanitize-chill + install-target-libio \ + install-target-libstdc++ \ + install-target-libg++ \ + install-target-newlib \ + install-target-winsup \ + install-target-libgloss \ + install-target-libiberty # The first rule in the file had better be this one. Don't put any above it. -all: $(ALL) +all: all.normal .PHONY: all # The target built for a native build. @@ -513,25 +617,6 @@ all.normal: \ $(ALL_X11_MODULES) \ all-gcc -# The target built for a cross build. -.PHONY: all.cross -all.cross: \ - all-bfd \ - all-binutils \ - all-byacc \ - all-dejagnu \ - all-flex \ - all-gas \ - all-gcc \ - all-gdb \ - all-ld \ - all-libiberty \ - all-mmalloc \ - all-opcodes \ - all-readline \ - all-sim \ - $(ALL_TARGET_MODULES) - # Do a target for all the subdirectories. A ``make do-X'' will do a # ``make X'' in all subdirectories (because, in general, there is a # dependency (below) of X upon do-X, a ``make X'' will also do this, @@ -547,20 +632,16 @@ DO_X = \ do-install-info \ do-installcheck \ do-mostlyclean \ - do-realclean + do-maintainer-clean \ + do-TAGS .PHONY: $(DO_X) $(DO_X): @target=`echo $@ | sed -e 's/^do-//'`; \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ - for i in $(SUBDIRS); do \ + for i in $(SUBDIRS) -dummy-; do \ if [ -f ./$$i/Makefile ]; then \ case $$i in \ - $(TARGET_LIBS) ) \ - for flag in $(EXTRA_TARGET_FLAGS); do \ - eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \ - done; \ - ;; \ gcc) \ for flag in $(EXTRA_GCC_FLAGS); do \ eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \ @@ -572,11 +653,28 @@ $(DO_X): done; \ ;; \ esac ; \ - export AR AS CC CXX NM RANLIB XTRAFLAGS; \ + export AR AS CC CXX NM RANLIB; \ if (cd ./$$i; \ $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \ - "RANLIB=$${RANLIB}" "XTRAFLAGS=$${XTRAFLAGS}" \ + "RANLIB=$${RANLIB}" \ + $${target}); \ + then true; else exit 1; fi; \ + else true; fi; \ + done + @target=`echo $@ | sed -e 's/^do-//'`; \ + r=`pwd`; export r; \ + srcroot=`cd $(srcdir); pwd`; export srcroot; \ + for i in $(TARGET_CONFIGDIRS) -dummy-; do \ + if [ -f $(TARGET_SUBDIR)/$$i/Makefile ]; then \ + for flag in $(EXTRA_TARGET_FLAGS); do \ + eval `echo "$$flag" | sed -e "s|^\(.*\)=\(.*\)|\1='\2'|"`; \ + done; \ + export AR AS CC CXX NM RANLIB; \ + if (cd $(TARGET_SUBDIR)/$$i; \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ $${target}); \ then true; else exit 1; fi; \ else true; fi; \ @@ -585,28 +683,37 @@ $(DO_X): # Here are the targets which correspond to the do-X targets. .PHONY: info installcheck dvi install-info -.PHONY: clean distclean mostlyclean realclean local-clean local-distclean +.PHONY: clean distclean mostlyclean maintainer-clean realclean +.PHONY: local-clean local-distclean local-maintainer-clean info: do-info installcheck: do-installcheck dvi: do-dvi -install-info: install-info-dirs do-install-info dir.info +install-info: do-install-info dir.info + srcroot=`cd $(srcdir); pwd`; export srcroot; \ if [ -f dir.info ] ; then \ $(INSTALL_DATA) dir.info $(infodir)/dir.info ; \ else true ; fi -do-install-info: install-info-dirs - local-clean: -rm -f *.a TEMP errs core *.o *~ \#* TAGS *.E local-distclean: -rm -f Makefile config.status + -if [ "$(TARGET_SUBDIR)" != "." ]; then \ + rm -rf $(TARGET_SUBDIR); \ + else true; fi + +local-maintainer-clean: + @echo "This command is intended for maintainers to use;" + @echo "it deletes files that may require special tools to rebuild." clean: do-clean local-clean mostlyclean: do-mostlyclean local-clean distclean: do-distclean local-clean local-distclean -realclean: do-realclean local-clean local-distclean +maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean +maintainer-clean: local-distclean +realclean: maintainer-clean # Check target. @@ -618,12 +725,20 @@ check: $(CHECK_MODULES) \ # Installation targets. -.PHONY: install uninstall vault-install +.PHONY: install uninstall source-vault binary-vault vault-install install: $(INSTALL_TARGET) uninstall: @echo "the uninstall target is not supported in this tree" +source-vault: + $(MAKE) -f ./release/Build-A-Release \ + host=$(host_alias) source-vault + +binary-vault: + $(MAKE) -f ./release/Build-A-Release \ + host=$(host_alias) target=$(target_alias) + vault-install: @if [ -f ./release/vault-install ] ; then \ ./release/vault-install $(host_alias) $(target_alias) ; \ @@ -634,7 +749,7 @@ vault-install: .PHONY: install.all install.all: install-no-fixedincludes @if [ -f ./gcc/Makefile ] ; then \ - rootme=`pwd` ; export rootme ; \ + r=`pwd` ; export r ; \ (cd ./gcc; \ $(MAKE) $(FLAGS_TO_PASS) install-headers) ; \ else \ @@ -649,7 +764,7 @@ install-no-fixedincludes: \ $(INSTALL_MODULES) \ $(INSTALL_TARGET_MODULES) \ $(INSTALL_X11_MODULES) \ - gcc-no-fixedincludes \ + gcc-no-fixedincludes # Install the gcc headers files, but not the fixed include files, # which Cygnus is not allowed to distribute. This rule is very @@ -661,9 +776,9 @@ gcc-no-fixedincludes: mv gcc/include gcc/tmp-include 2>/dev/null; \ mkdir gcc/include; \ cp $(srcdir)/gcc/gsyslimits.h gcc/include/syslimits.h; \ - touch gcc/stmp-fixinc; \ + touch gcc/stmp-fixinc gcc/include/fixed; \ rm -f gcc/stmp-headers gcc/stmp-int-hdrs; \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd` ; export srcroot; \ (cd ./gcc; \ $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ @@ -671,46 +786,44 @@ gcc-no-fixedincludes: mv gcc/tmp-include gcc/include 2>/dev/null; \ else true; fi -.PHONY: install.cross -install.cross: \ - install-dirs \ - install-binutils \ - install-byacc \ - install-dejagnu \ - install-etc \ - install-flex \ - install-gas \ - install-gcc \ - install-gdb \ - install-glob \ - install-ld \ - install-libiberty \ - install-mmalloc \ - install-opcodes \ - install-readline \ - $(INSTALL_TARGET_MODULES) - # This rule is used to build the modules which use FLAGS_TO_PASS. To # build a target all-X means to cd to X and make all. -# all-glob is handled specially because it doesn't actually build. -.PHONY: $(ALL_MODULES) all-glob -$(ALL_MODULES) all-glob: +# +# all-gui, and all-libproc are handled specially because +# they are still experimental, and if they fail to build, that +# shouldn't stop "make all". +.PHONY: $(ALL_MODULES) all-gui all-libproc +$(ALL_MODULES) all-gui all-libproc: @dir=`echo $@ | sed -e 's/all-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) all); \ else \ true; \ fi -# This rule is used to check the modules which use FLAGS_TO_PASS. To -# build a target check-X means to cd to X and make all. -.PHONY: $(CHECK_MODULES) -$(CHECK_MODULES): +# These rules are used to check the modules which use FLAGS_TO_PASS. +# To build a target check-X means to cd to X and make check. Some +# modules are only tested in a native toolchain. + +.PHONY: $(CHECK_MODULES) $(NATIVE_CHECK_MODULES) $(CROSS_CHECK_MODULES) +$(NATIVE_CHECK_MODULES): + @if [ "$(host_canonical)" = "$(target_canonical)" ] ; then \ + dir=`echo $@ | sed -e 's/check-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + r=`pwd`; export r; \ + srcroot=`cd $(srcdir); pwd`; export srcroot; \ + (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \ + else \ + true; \ + fi; \ + fi + +$(CROSS_CHECK_MODULES): @dir=`echo $@ | sed -e 's/check-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) check); \ else \ @@ -723,9 +836,73 @@ $(CHECK_MODULES): $(INSTALL_MODULES): install-dirs @dir=`echo $@ | sed -e 's/install-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ - (cd $${dir}; $(MAKE) install); \ + (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + +# This rule is used to configure the modules which are built with the +# target tools. +.PHONY: $(CONFIGURE_TARGET_MODULES) +$(CONFIGURE_TARGET_MODULES): + @dir=`echo $@ | sed -e 's/configure-target-//'`; \ + if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ + true; \ + elif echo " $(TARGET_CONFIGDIRS) " | grep " $${dir} " >/dev/null 2>&1; then \ + if [ -d $(srcdir)/$${dir} ]; then \ + [ -d $(TARGET_SUBDIR)/$${dir} ] || mkdir $(TARGET_SUBDIR)/$${dir};\ + r=`pwd`; export r; \ + srcroot=`cd $(srcdir); pwd`; export srcroot; \ + AR="$(AR_FOR_TARGET)"; export AR; \ + AS="$(AS_FOR_TARGET)"; export AS; \ + CC="$(CC_FOR_TARGET)"; export CC; \ + CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ + CXX="$(CXX_FOR_TARGET)"; export CXX; \ + CXXFLAGS="$(CXXFLAGS_FOR_TARGET)"; export CXXFLAGS; \ + LD="$(LD_FOR_TARGET)"; export LD; \ + NM="$(NM_FOR_TARGET)"; export NM; \ + RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ + echo Configuring in $(TARGET_SUBDIR)/$${dir}; \ + cd $(TARGET_SUBDIR)/$${dir}; \ + case $(srcdir) in \ + /*) \ + topdir=$(srcdir) ;; \ + *) \ + case "$(TARGET_SUBDIR)" in \ + .) topdir="../$(srcdir)" ;; \ + *) topdir="../../$(srcdir)" ;; \ + esac ;; \ + esac; \ + if [ "$(srcdir)" = "." ] ; then \ + if [ "$(TARGET_SUBDIR)" != "." ] ; then \ + if $(SHELL) $${srcroot}/symlink-tree $${topdir}/$${dir} "Makefile" ; then \ + true; \ + else \ + exit 1; \ + fi; \ + else \ + true; \ + fi; \ + srcdiroption="--srcdir=."; \ + libsrcdir="."; \ + else \ + srcdiroption="--srcdir=$${topdir}/$${dir}"; \ + libsrcdir="$${srcroot}/$${dir}"; \ + fi; \ + if [ -f $${libsrcdir}/configure ] ; then \ + $(SHELL) $${libsrcdir}/configure \ + $(CONFIG_ARGUMENTS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + else \ + $(SHELL) $${srcroot}/configure \ + $(CONFIG_ARGUMENTS) $${srcdiroption} \ + --with-target-subdir="$(TARGET_SUBDIR)"; \ + fi; \ + else \ + true; \ + fi \ else \ true; \ fi @@ -734,11 +911,11 @@ $(INSTALL_MODULES): install-dirs # To build a target all-X means to cd to X and make all. .PHONY: $(ALL_TARGET_MODULES) $(ALL_TARGET_MODULES): - @dir=`echo $@ | sed -e 's/all-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + @dir=`echo $@ | sed -e 's/all-target-//'`; \ + if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ - (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ + (cd $(TARGET_SUBDIR)/$${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) all); \ else \ true; \ fi @@ -747,11 +924,11 @@ $(ALL_TARGET_MODULES): # To build a target install-X means to cd to X and make install. .PHONY: $(CHECK_TARGET_MODULES) $(CHECK_TARGET_MODULES): - @dir=`echo $@ | sed -e 's/check-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + @dir=`echo $@ | sed -e 's/check-target-//'`; \ + if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ - (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) check); \ + (cd $(TARGET_SUBDIR)/$${dir};$(MAKE) $(TARGET_FLAGS_TO_PASS) check);\ else \ true; \ fi @@ -761,11 +938,12 @@ $(CHECK_TARGET_MODULES): # and make install. .PHONY: $(INSTALL_TARGET_MODULES) $(INSTALL_TARGET_MODULES): install-dirs - @dir=`echo $@ | sed -e 's/install-//'`; \ - if [ -f ./$${dir}/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + @dir=`echo $@ | sed -e 's/install-target-//'`; \ + if [ -f $(TARGET_SUBDIR)/$${dir}/Makefile ] ; then \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ - (cd $${dir}; $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ + (cd $(TARGET_SUBDIR)/$${dir}; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) install); \ else \ true; \ fi @@ -776,7 +954,7 @@ $(INSTALL_TARGET_MODULES): install-dirs $(ALL_X11_MODULES): @dir=`echo $@ | sed -e 's/all-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; \ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) all); \ @@ -790,7 +968,7 @@ $(ALL_X11_MODULES): $(CHECK_X11_MODULES): @dir=`echo $@ | sed -e 's/check-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; \ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) check); \ @@ -804,7 +982,7 @@ $(CHECK_X11_MODULES): $(INSTALL_X11_MODULES): @dir=`echo $@ | sed -e 's/install-//'`; \ if [ -f ./$${dir}/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd $${dir}; \ $(MAKE) $(FLAGS_TO_PASS) $(X11_FLAGS_TO_PASS) install); \ @@ -816,7 +994,7 @@ $(INSTALL_X11_MODULES): .PHONY: all-gcc all-gcc: @if [ -f ./gcc/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) all); \ else \ @@ -826,7 +1004,7 @@ all-gcc: .PHONY: check-gcc check-gcc: @if [ -f ./gcc/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) check); \ else \ @@ -836,56 +1014,85 @@ check-gcc: .PHONY: install-gcc install-gcc: @if [ -f ./gcc/Makefile ] ; then \ - rootme=`pwd`; export rootme; \ + r=`pwd`; export r; \ srcroot=`cd $(srcdir); pwd`; export srcroot; \ (cd gcc; $(MAKE) $(GCC_FLAGS_TO_PASS) install); \ else \ true; \ fi + +# EXPERIMENTAL STUFF +# This rule is used to install the modules which use FLAGS_TO_PASS. +# To build a target install-X means to cd to X and make install. +.PHONY: install-dosrel +install-dosrel: install-dirs info + @dir=`echo $@ | sed -e 's/install-//'`; \ + if [ -f ./$${dir}/Makefile ] ; then \ + r=`pwd`; export r; \ + srcroot=`cd $(srcdir); pwd`; export srcroot; \ + (cd $${dir}; $(MAKE) $(FLAGS_TO_PASS) install); \ + else \ + true; \ + fi + +install-dosrel-fake: + + # This is a list of inter-dependencies among modules. -all-autoconf: +all-autoconf: all-m4 all-bfd: -all-binutils: all-libiberty all-opcodes all-bfd all-flex +all-binutils: all-libiberty all-opcodes all-bfd all-flex all-byacc all-byacc: -# start-sanitize-chill -all-chillrt: all-binutils all-gas all-gcc all-newlib -# end-sanitize-chill all-cvs: -all-dejagnu: +all-dejagnu: all-tcl all-expect all-tk all-diff: all-libiberty all-emacs: +all-emacs19: all-byacc all-etc: all-expect: all-tcl all-tk all-fileutils: all-libiberty all-find: all-flex: all-libiberty all-byacc all-gas: all-libiberty all-opcodes all-bfd +all-gash: all-tcl all-gawk: -all-gcc: all-libiberty all-byacc all-binutils all-gas -all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-glob all-byacc all-sim -all-glob: +ALL_GCC = all-gcc +all-gcc: all-libiberty all-byacc all-binutils all-gas all-ld +all-gdb: all-libiberty all-opcodes all-bfd all-mmalloc all-readline all-byacc all-sim $(gdbnlmrequirements) all-gprof: all-libiberty all-bfd -all-grep: +all-grep: all-libiberty +all-grez: all-libiberty all-bfd +all-gui: all-gdb all-libproc all-target-librx all-gzip: all-libiberty all-hello: all-libiberty all-indent: -all-ispell: all-emacs +all-ispell: all-emacs19 all-ld: all-libiberty all-bfd all-byacc all-flex -all-libg++: all-gas all-ld all-gcc all-xiberty all-newlib +configure-target-libg++: $(ALL_GCC) configure-target-librx +all-target-libg++: configure-target-libg++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-target-librx all-target-libstdc++ +configure-target-libgloss: $(ALL_GCC) +all-target-libgloss: configure-target-libgloss configure-target-newlib +configure-target-libio: $(ALL_GCC) +all-target-libio: configure-target-libio all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-libiberty: +configure-target-librx: $(ALL_GCC) configure-target-newlib +all-target-librx: configure-target-librx +configure-target-libstdc++: $(ALL_GCC) +all-target-libstdc++: configure-target-libstdc++ all-gas all-ld all-gcc all-target-libiberty all-target-newlib all-target-libio all-m4: all-libiberty all-make: all-libiberty all-mmalloc: -all-newlib: all-binutils all-gas all-gcc +configure-target-newlib: $(ALL_GCC) +all-target-newlib: configure-target-newlib all-binutils all-gas all-gcc all-opcodes: all-bfd -all-patch: -all-prms: +all-patch: all-libiberty +all-prms: all-libiberty all-rcs: all-readline: all-recode: all-libiberty -all-sed: -all-send-pr: +all-sed: all-libiberty +all-send-pr: all-prms all-shellutils: all-sim: all-libiberty all-bfd all-tar: all-libiberty @@ -897,8 +1104,11 @@ all-textutils: all-tgas: all-libiberty all-bfd all-time: all-wdiff: +all-target-winsup: all-target-newlib configure-target-winsup +configure-target-winsup: configure-target-newlib all-uudecode: all-libiberty -all-xiberty: all-gcc all-newlib +configure-target-libiberty: $(ALL_GCC) +all-target-libiberty: configure-target-libiberty all-gcc all-ld all-target-newlib ### other supporting targets @@ -911,7 +1121,7 @@ MAKEDIRS= \ install-dirs: @for i in $(MAKEDIRS) ; do \ echo Making $$i... ; \ - parent=`echo $$i|sed -e 's@/[^/]*$$@@'`; \ + parent=`echo $$i | sed -e 's@/[^/]*$$@@' | sed -e 's@^$$@/@'`; \ if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi ; \ if [ ! -d $$i ] ; then \ if mkdir $$i ; then \ @@ -924,12 +1134,6 @@ install-dirs: fi ; \ done -.PHONY: install-info-dirs -install-info-dirs: - if [ -d $(prefix) ] ; then true ; else mkdir $(prefix) ; fi - -parent=`echo $(infodir)|sed -e 's@/[^/]*$$@@'`; \ - if [ -d $$parent ] ; then true ; else mkdir $$parent ; fi - -if [ -d $(infodir) ] ; then true ; else mkdir $(infodir) ; fi dir.info: do-install-info if [ -f $(srcdir)/texinfo/gen-info-dir ] ; then \ @@ -944,140 +1148,80 @@ dist: etags tags: TAGS -TAGS: - etags `$(MAKE) ls` - -ls: - @echo Makefile - @for i in $(SUBDIRS); \ - do \ - (cd $$i; \ - pwd=`pwd`; \ - wd=`basename $$pwd`; \ - for j in `$(MAKE) ls`; \ - do \ - echo $$wd/$$j; \ - done) \ - done +# Right now this just builds TAGS in each subdirectory. emacs19 has the +# ability to use several tags files at once, so there is probably no need +# to combine them into one big TAGS file (like CVS 1.3 does). We could +# (if we felt like it) have this Makefile write a piece of elisp which +# the user could load to tell emacs19 where all the TAGS files we just +# built are. +TAGS: do-TAGS # with the gnu make, this is done automatically. -Makefile: $(srcdir)/Makefile.in $(host_makefile_frag) $(target_makefile_frag) +Makefile: Makefile.in configure.in $(host_makefile_frag) $(target_makefile_frag) $(SHELL) ./config.status # -# Build GDB distributions that contain BFD, Include, Libiberty, Readline, etc +# Support for building net releases +# Files in devo used in any net release. +# ChangeLog omitted because it may refer to files which are not in this +# distribution (perhaps it would be better to include it anyway). DEVO_SUPPORT= README Makefile.in configure configure.in \ - config.guess config.sub config move-if-change -ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \ - configure.texi standards.texi make-stds.texi -GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline glob sim -GDB_SUPPORT_FILES= $(GDB_SUPPORT_DIRS) + config.guess config.sub config move-if-change \ + mpw-README mpw-build.in mpw-config.in mpw-configure \ + COPYING COPYING.LIB install.sh config-ml.in symlink-tree -.PHONY: setup-dirs-gdb gdb.tar.Z make-gdb.tar.Z -setup-dirs-gdb: - ./configure sun4 - $(MAKE) clean - ./configure -rm sun4 - chmod og=u `find etc $(DEVO_SUPPORT) $(GDB_SUPPORT_FILES) -print` - -gdb.tar.Z: setup-dirs-gdb - (cd gdb; $(MAKE) -f Makefile.in make-proto-gdb.dir BISON="byacc") - (cd gdb; $(MAKE) -f Makefile.in make-proto-testsuite.dir) - $(MAKE) $(MFLAGS) -f Makefile.in make-gdb.tar.Z - -make-gdb.tar.Z: $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS) gdb texinfo/texinfo.tex - rm -rf proto-toplev; mkdir proto-toplev - ln -s ../gdb/proto-gdb.dir proto-toplev/gdb - (cd proto-toplev; for i in $(DEVO_SUPPORT) $(GDB_SUPPORT_DIRS); do \ - ln -s ../$$i . ; \ - done) - mkdir proto-toplev/etc - (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \ - ln -s ../../etc/$$i . ; \ - done) - # Put only one copy (four hard links) of COPYING in the tar file. - rm proto-toplev/bfd/COPYING - ln proto-toplev/gdb/COPYING proto-toplev/bfd/COPYING - rm proto-toplev/include/COPYING - ln proto-toplev/gdb/COPYING proto-toplev/include/COPYING - rm proto-toplev/readline/COPYING - ln proto-toplev/gdb/COPYING proto-toplev/readline/COPYING - - # Take out texinfo and glob from configurable dirs - rm proto-toplev/configure.in - sed -e '/^host_tools=/s/texinfo //' \ - -e '/^host_libs=/s/glob //' \ - proto-toplev/configure.in - - # Take out texinfo from a few places; make simple BISON=bison line. - rm proto-toplev/Makefile.in - sed -e '/^all\.normal: /s/\all-texinfo //' \ - -e '/^ install-texinfo /d' \ - -e '/^BISON = /,/^$$/d' \ - -e '/^# BISON:/s/.*/BISON = bison -y/' \ - proto-toplev/Makefile.in - - mkdir proto-toplev/texinfo - ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/ - ln -s ../../texinfo/tex3patch proto-toplev/texinfo/ - chmod og=u `find proto-toplev -print` - (VER=`sed Making gdb-$$VER.tar.Z"; \ - tar cfh - gdb-$$VER | $(COMPRESS) -v >gdb-$$VER.tar.Z; \ - echo "==> Making gdb-$$VER.tar.z"; \ - tar cfh - gdb-$$VER | $(GZIP) -v -9 >gdb-$$VER.tar.z) - - # Make the testsuite archive separately. - ln -s ../../gdb/proto-testsuite.dir/testsuite proto-toplev/gdb/testsuite - # Blow away the Chill test that requires a Chill compiled executable, - # since GNU Chill is not yet publically available. - rm -rf proto-toplev/gdb/testsuite/gdb.t31 - - # Put a copy of COPYING in the tar file. - ln proto-toplev/gdb/COPYING proto-toplev/gdb/testsuite/COPYING - chmod og=u `find proto-toplev/gdb/testsuite -print` - (VER=`sed Making gdb-$$VER-testsuite.tar.Z"; \ - tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \ - gdb-$$VER/config.sub gdb-$$VER/move-if-change \ - gdb-$$VER/gdb/testsuite | \ - $(COMPRESS) -v >gdb-$$VER-testsuite.tar.Z; \ - echo "==> Making gdb-$$VER-testsuite.tar.z"; \ - tar cfh - gdb-$$VER/configure gdb-$$VER/config.guess \ - gdb-$$VER/config.sub gdb-$$VER/move-if-change \ - gdb-$$VER/gdb/testsuite | \ - $(GZIP) -v -9 >gdb-$$VER-testsuite.tar.z) +# Files in devo/etc used in any net release. +# ChangeLog omitted because it may refer to files which are not in this +# distribution (perhaps it would be better to include it anyway). +ETC_SUPPORT= Makefile.in cfg-paper.texi configure.in configure.man \ + configure.texi standards.texi make-stds.texi \ + configure.info* standards.info* cfg-paper.info* # When you use `make setup-dirs' or `make taz' you should always redefine # this macro. SUPPORT_FILES = list-of-support-files-for-tool-in-question -# Directories that might want `make diststuff' run. -DISTSTUFFDIRS= ld gprof gdb +# Files where "byacc" (Cygnus version) should be changed to "bison -y" (FSF). +DISTBISONFILES= binutils/Makefile.in gas/Makefile.in gdb/Makefile.in .PHONY: taz -taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo +taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) \ + texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo + # Make sure "diststuff" files get built properly. + for f in $(DISTBISONFILES) ; do \ + if [ -r $$f ]; then \ + sed '/^BISON *=.*$$/s/.*/BISON = bison -y/' <$$f >tmp ; \ + mv -f tmp $$f ; \ + else true; fi ; \ + done + # Take out texinfo from a few places; make simple BISON=bison line. + sed -e '/^all\.normal: /s/\all-texinfo //' \ + -e '/^ install-texinfo /d' \ + -e '/^BISON = /,/^$$/d' \ + -e '/^# BISON:/s/.*/BISON = bison -y/' \ + tmp + mv -f tmp Makefile.in + # + $(start-sanitize-Sanitize) + @if [ -f .Sanitize ] ; then echo "RUN Sanitize FIRST!" ; false ; fi ; + $(end-sanitize-Sanitize) ./configure sun4 - $(MAKE) clean - ./configure -rm sun4 - chmod og=u `find etc $(DEVO_SUPPORT) $(SUPPORT_FILES) $(TOOL) -print` - # Make links, and run "make diststuff" when needed. - # The `echo' for setting `p' is to convert all whitespace to spaces. - # Then the `case' further below should tell whether $$d is in - # DISTSTUFFDIRS. + [ -z "$(CONFIGURE_TARGET_MODULES)" ] \ + || $(MAKE) $(CONFIGURE_TARGET_MODULES) ALL_GCC="" \ + CC_FOR_TARGET="$(CC) CXX_FOR_TARGET="$(CXX)" + # Make links, and run "make diststuff" or "make info" when needed. rm -rf proto-toplev ; mkdir proto-toplev set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \ - p=" `echo $(DISTSTUFFDIRS)` " ; \ for d in $$dirs ; do \ if [ -d $$d ]; then \ - case " $$p " in \ - *" $$d "*) \ - echo making diststuff in $$d ; \ - (cd $$d ; $(MAKE) -f Makefile.in diststuff) || exit 1 ;; \ - esac ; \ + if [ ! -f $$d/Makefile ] ; then true ; \ + elif grep '^diststuff:' $$d/Makefile >/dev/null ; then \ + (cd $$d ; $(MAKE) diststuff ) || exit 1 ; \ + elif grep '^info:' $$d/Makefile >/dev/null ; then \ + (cd $$d ; $(MAKE) info ) || exit 1 ; \ + fi ; \ if [ -d $$d/proto-$$d.dir ]; then \ ln -s ../$$d/proto-$$d.dir proto-toplev/$$d ; \ else \ @@ -1085,55 +1229,92 @@ taz: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex texinfo/gpl.texinfo fi ; \ else ln -s ../$$d proto-toplev/$$d ; fi ; \ done + cd etc ; $(MAKE) info + $(MAKE) distclean # mkdir proto-toplev/etc - (cd proto-toplev/etc; for i in $(ETC_SUPPORT); do \ + (cd proto-toplev/etc; \ + for i in $(ETC_SUPPORT); do \ ln -s ../../etc/$$i . ; \ - done) + done) # - # Take out texinfo and glob from configurable dirs + # Take out texinfo from configurable dirs rm proto-toplev/configure.in sed -e '/^host_tools=/s/texinfo //' \ - -e '/^host_libs=/s/glob //' \ proto-toplev/configure.in # - # Take out texinfo from a few places; make simple BISON=bison line. - rm proto-toplev/Makefile.in - sed -e '/^all\.normal: /s/\all-texinfo //' \ - -e '/^ install-texinfo /d' \ - -e '/^BISON = /,/^$$/d' \ - -e '/^# BISON:/s/.*/BISON = bison -y/' \ - proto-toplev/Makefile.in - # mkdir proto-toplev/texinfo ln -s ../../texinfo/texinfo.tex proto-toplev/texinfo/ ln -s ../../texinfo/gpl.texinfo proto-toplev/texinfo/ + ln -s ../../texinfo/lgpl.texinfo proto-toplev/texinfo/ ln -s ../../texinfo/tex3patch proto-toplev/texinfo/ - chmod og=u `find proto-toplev -print` + chmod og=u `find . -print` (VER=`sed <$(TOOL)/Makefile.in -n 's/^VERSION *= *//p'`; \ - echo "==> Making $(TOOL)-$$VER.tar.z"; \ - ln -s proto-toplev $(TOOL)-$$VER; \ + echo "==> Making $(TOOL)-$$VER.tar.gz"; \ + rm -f $(TOOL)-$$VER; ln -s proto-toplev $(TOOL)-$$VER; \ tar cfh - $(TOOL)-$$VER \ - | $(GZIP) -v -9 >$(TOOL)-$$VER.tar.gz) + | $(GZIPPROG) -v -9 >$(TOOL)-$$VER.tar.gz ) -TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo +TEXINFO_SUPPORT= texinfo/texinfo.tex texinfo/gpl.texinfo texinfo/lgpl.texinfo DIST_SUPPORT= $(DEVO_SUPPORT) $(TEXINFO_SUPPORT) .PHONY: gas.tar.gz GAS_SUPPORT_DIRS= bfd include libiberty opcodes gas.tar.gz: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas - $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" TOOL=gas + $(MAKE) -f Makefile.in taz TOOL=gas \ + SUPPORT_FILES="$(GAS_SUPPORT_DIRS)" # The FSF "binutils" release includes gprof and ld. .PHONY: binutils.tar.gz -BINUTILS_SUPPORT_DIRS= bfd include libiberty opcodes ld gprof +BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof binutils.tar.gz: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils - $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS)" TOOL=binutils + $(MAKE) -f Makefile.in taz TOOL=binutils \ + SUPPORT_FILES="$(BINUTILS_SUPPORT_DIRS) makeall.bat configure.bat" .PHONY: gas+binutils.tar.gz GASB_SUPPORT_DIRS= $(GAS_SUPPORT_DIRS) binutils ld gprof gas+binutils.tar.gz: $(DIST_SUPPORT) $(GASB_SUPPORT_DIRS) gas - $(MAKE) -f Makefile.in taz SUPPORT_FILES="$(GASB_SUPPORT_DIRS)" TOOL=gas + $(MAKE) -f Makefile.in taz TOOL=gas \ + SUPPORT_FILES="$(GASB_SUPPORT_DIRS) makeall.bat configure.bat" + +.PHONY: libg++.tar.gz +LIBGXX_SUPPORT_DIRS=include libstdc++ libio librx libiberty +libg++.tar.gz: $(DIST_SUPPORT) libg++ + $(MAKE) -f Makefile.in taz TOOL=libg++ \ + SUPPORT_FILES="$(LIBGXX_SUPPORT_DIRS)" + +GNATS_SUPPORT_DIRS=include libiberty send-pr +gnats.tar.gz: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats + $(MAKE) -f Makefile.in taz TOOL=gnats \ + SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)" + +.PHONY: gdb.tar.gz +GDB_SUPPORT_DIRS= bfd include libiberty mmalloc opcodes readline sim utils +GDBTK_SUPPORT_DIRS= `if [ -d tcl -a -d tk ] ; then echo tcl tk ; fi` +gdb.tar.gz: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb + $(MAKE) -f Makefile.in taz TOOL=gdb \ + SUPPORT_FILES="$(GDB_SUPPORT_DIRS) $(GDBTK_SUPPORT_DIRS)" + +.PHONY: newlib.tar.gz +NEWLIB_SUPPORT_DIRS=libgloss +# taz configures for the sun4 target which won't configure newlib. +# We need newlib configured so that the .info files are made. +# Unfortunately, it is not enough to just configure newlib separately: +# taz will build the .info files but since SUBDIRS won't contain newlib, +# distclean won't be run (leaving Makefile, config.status, and the tmp files +# used in building the .info files, eg: *.def, *.ref). +# Compensate here by configuring newlib for a simple (no multilib support) +# cross target (sparc64), building the info files, and doing make distclean +# ourselves. +newlib.tar.gz: $(DIST_SUPPORT) $(NEWLIB_SUPPORT_DIRS) newlib + rootme=`pwd` ; \ + cd newlib && ../configure --srcdir $$rootme/newlib \ + --host sun4 --target sparc64-elf + cd newlib ; make info + cd newlib ; make distclean + $(MAKE) -f Makefile.in taz TOOL=newlib \ + SUPPORT_FILES="$(NEWLIB_SUPPORT_DIRS)" \ + DEVO_SUPPORT="$(DEVO_SUPPORT) COPYING.NEWLIB" newlib .NOEXPORT: MAKEOVERRIDES=