X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=bfd%2Fcoff-sh.c;h=0c1061153a8fdde9261af03f406def24d0d0e50d;hb=6d350754a32007465f9adbc11b87339e4493b358;hp=cf37ad22f2ab1f240281bd0e0add3fb11f84bc2a;hpb=1a72702bb30ec3f94627cfcae684823b413f20b9;p=deliverable%2Fbinutils-gdb.git diff --git a/bfd/coff-sh.c b/bfd/coff-sh.c index cf37ad22f2..0c1061153a 100644 --- a/bfd/coff-sh.c +++ b/bfd/coff-sh.c @@ -1,5 +1,5 @@ /* BFD back-end for Renesas Super-H COFF binaries. - Copyright (C) 1993-2016 Free Software Foundation, Inc. + Copyright (C) 1993-2020 Free Software Foundation, Inc. Contributed by Cygnus Support. Written by Steve Chamberlain, . Relaxing code written by Ian Lance Taylor, . @@ -173,19 +173,19 @@ static reloc_howto_type sh_coff_howtos[] = EMPTY_HOWTO (15), #ifdef COFF_WITH_PE - HOWTO (R_SH_IMAGEBASE, /* type */ - 0, /* rightshift */ - 2, /* size (0 = byte, 1 = short, 2 = long) */ - 32, /* bitsize */ - FALSE, /* pc_relative */ - 0, /* bitpos */ + HOWTO (R_SH_IMAGEBASE, /* type */ + 0, /* rightshift */ + 2, /* size (0 = byte, 1 = short, 2 = long) */ + 32, /* bitsize */ + FALSE, /* pc_relative */ + 0, /* bitpos */ complain_overflow_bitfield, /* complain_on_overflow */ - sh_reloc, /* special_function */ - "rva32", /* name */ - TRUE, /* partial_inplace */ - 0xffffffff, /* src_mask */ - 0xffffffff, /* dst_mask */ - FALSE), /* pcrel_offset */ + sh_reloc, /* special_function */ + "rva32", /* name */ + TRUE, /* partial_inplace */ + 0xffffffff, /* src_mask */ + 0xffffffff, /* dst_mask */ + FALSE), /* pcrel_offset */ #else EMPTY_HOWTO (16), /* R_SH_IMM8 */ #endif @@ -445,11 +445,11 @@ coff_sh_rtype_to_howto (bfd * abfd ATTRIBUTE_UNUSED, *addendp -= 4; /* If the symbol is defined, then the generic code is going to - add back the symbol value in order to cancel out an - adjustment it made to the addend. However, we set the addend - to 0 at the start of this function. We need to adjust here, - to avoid the adjustment the generic code will make. FIXME: - This is getting a bit hackish. */ + add back the symbol value in order to cancel out an + adjustment it made to the addend. However, we set the addend + to 0 at the start of this function. We need to adjust here, + to avoid the adjustment the generic code will make. FIXME: + This is getting a bit hackish. */ if (sym != NULL && sym->n_scnum != 0) *addendp -= sym->n_value; } @@ -492,7 +492,7 @@ static const struct shcoff_reloc_map sh_reloc_map[] = #define coff_bfd_reloc_name_lookup sh_coff_reloc_name_lookup static reloc_howto_type * -sh_coff_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, +sh_coff_reloc_type_lookup (bfd *abfd, bfd_reloc_code_real_type code) { unsigned int i; @@ -501,7 +501,8 @@ sh_coff_reloc_type_lookup (bfd * abfd ATTRIBUTE_UNUSED, if (sh_reloc_map[i].bfd_reloc_val == code) return &sh_coff_howtos[(int) sh_reloc_map[i].shcoff_reloc_val]; - (*_bfd_error_handler) (_("SH Error: unknown reloc type %d"), code); + _bfd_error_handler (_("%pB: unsupported relocation type %#x"), + abfd, (unsigned int) code); return NULL; } @@ -566,7 +567,7 @@ sh_reloc (bfd * abfd, bfd * output_bfd, char ** error_message ATTRIBUTE_UNUSED) { - unsigned long insn; + bfd_vma insn; bfd_vma sym_value; unsigned short r_type; bfd_vma addr = reloc_entry->address; @@ -596,6 +597,9 @@ sh_reloc (bfd * abfd, && bfd_is_und_section (symbol_in->section)) return bfd_reloc_undefined; + if (addr > input_section->size) + return bfd_reloc_outofrange; + sym_value = get_symbol_value (symbol_in); switch (r_type) @@ -606,14 +610,14 @@ sh_reloc (bfd * abfd, #endif insn = bfd_get_32 (abfd, hit_data); insn += sym_value + reloc_entry->addend; - bfd_put_32 (abfd, (bfd_vma) insn, hit_data); + bfd_put_32 (abfd, insn, hit_data); break; #ifdef COFF_WITH_PE case R_SH_IMAGEBASE: insn = bfd_get_32 (abfd, hit_data); insn += sym_value + reloc_entry->addend; insn -= pe_data (input_section->output_section->owner)->pe_opthdr.ImageBase; - bfd_put_32 (abfd, (bfd_vma) insn, hit_data); + bfd_put_32 (abfd, insn, hit_data); break; #endif case R_SH_PCDISP: @@ -623,12 +627,10 @@ sh_reloc (bfd * abfd, + input_section->output_offset + addr + 4); - sym_value += (insn & 0xfff) << 1; - if (insn & 0x800) - sym_value -= 0x1000; - insn = (insn & 0xf000) | (sym_value & 0xfff); - bfd_put_16 (abfd, (bfd_vma) insn, hit_data); - if (sym_value < (bfd_vma) -0x1000 || sym_value >= 0x1000) + sym_value += (((insn & 0xfff) ^ 0x800) - 0x800) << 1; + insn = (insn & 0xf000) | ((sym_value >> 1) & 0xfff); + bfd_put_16 (abfd, insn, hit_data); + if (sym_value + 0x1000 >= 0x2000 || (sym_value & 1) != 0) return bfd_reloc_overflow; break; default: @@ -720,7 +722,7 @@ sh_relax_section (bfd *abfd, if (coff_section_data (abfd, sec) == NULL) { - bfd_size_type amt = sizeof (struct coff_section_tdata); + size_t amt = sizeof (struct coff_section_tdata); sec->used_by_bfd = bfd_zalloc (abfd, amt); if (sec->used_by_bfd == NULL) return FALSE; @@ -763,16 +765,18 @@ sh_relax_section (bfd *abfd, } /* The r_offset field of the R_SH_USES reloc will point us to - the register load. The 4 is because the r_offset field is - computed as though it were a jump offset, which are based - from 4 bytes after the jump instruction. */ + the register load. The 4 is because the r_offset field is + computed as though it were a jump offset, which are based + from 4 bytes after the jump instruction. */ laddr = irel->r_vaddr - sec->vma + 4; /* Careful to sign extend the 32-bit offset. */ laddr += ((irel->r_offset & 0xffffffff) ^ 0x80000000) - 0x80000000; if (laddr >= sec->size) { - (*_bfd_error_handler) ("%B: 0x%lx: warning: bad R_SH_USES offset", - abfd, (unsigned long) irel->r_vaddr); + /* xgettext: c-format */ + _bfd_error_handler + (_("%pB: %#" PRIx64 ": warning: bad R_SH_USES offset"), + abfd, (uint64_t) irel->r_vaddr); continue; } insn = bfd_get_16 (abfd, contents + laddr); @@ -780,32 +784,34 @@ sh_relax_section (bfd *abfd, /* If the instruction is not mov.l NN,rN, we don't know what to do. */ if ((insn & 0xf000) != 0xd000) { - ((*_bfd_error_handler) - ("%B: 0x%lx: warning: R_SH_USES points to unrecognized insn 0x%x", - abfd, (unsigned long) irel->r_vaddr, insn)); + _bfd_error_handler + /* xgettext: c-format */ + (_("%pB: %#" PRIx64 ": warning: R_SH_USES points to unrecognized insn %#x"), + abfd, (uint64_t) irel->r_vaddr, insn); continue; } /* Get the address from which the register is being loaded. The - displacement in the mov.l instruction is quadrupled. It is a - displacement from four bytes after the movl instruction, but, - before adding in the PC address, two least significant bits - of the PC are cleared. We assume that the section is aligned - on a four byte boundary. */ + displacement in the mov.l instruction is quadrupled. It is a + displacement from four bytes after the movl instruction, but, + before adding in the PC address, two least significant bits + of the PC are cleared. We assume that the section is aligned + on a four byte boundary. */ paddr = insn & 0xff; paddr *= 4; paddr += (laddr + 4) &~ (bfd_vma) 3; if (paddr >= sec->size) { - ((*_bfd_error_handler) - ("%B: 0x%lx: warning: bad R_SH_USES load offset", - abfd, (unsigned long) irel->r_vaddr)); + _bfd_error_handler + /* xgettext: c-format */ + (_("%pB: %#" PRIx64 ": warning: bad R_SH_USES load offset"), + abfd, (uint64_t) irel->r_vaddr); continue; } /* Get the reloc for the address from which the register is - being loaded. This reloc will tell us which function is - actually being called. */ + being loaded. This reloc will tell us which function is + actually being called. */ paddr += sec->vma; for (irelfn = internal_relocs; irelfn < irelend; irelfn++) if (irelfn->r_vaddr == paddr @@ -821,9 +827,10 @@ sh_relax_section (bfd *abfd, break; if (irelfn >= irelend) { - ((*_bfd_error_handler) - ("%B: 0x%lx: warning: could not find expected reloc", - abfd, (unsigned long) paddr)); + _bfd_error_handler + /* xgettext: c-format */ + (_("%pB: %#" PRIx64 ": warning: could not find expected reloc"), + abfd, (uint64_t) paddr); continue; } @@ -837,9 +844,10 @@ sh_relax_section (bfd *abfd, &sym); if (sym.n_scnum != 0 && sym.n_scnum != sec->target_index) { - ((*_bfd_error_handler) - ("%B: 0x%lx: warning: symbol in unexpected section", - abfd, (unsigned long) paddr)); + _bfd_error_handler + /* xgettext: c-format */ + (_("%pB: %#" PRIx64 ": warning: symbol in unexpected section"), + abfd, (uint64_t) paddr); continue; } @@ -860,8 +868,8 @@ sh_relax_section (bfd *abfd, && h->root.type != bfd_link_hash_defweak) { /* This appears to be a reference to an undefined - symbol. Just ignore it--it will be caught by the - regular reloc processing. */ + symbol. Just ignore it--it will be caught by the + regular reloc processing. */ continue; } @@ -906,14 +914,14 @@ sh_relax_section (bfd *abfd, /* Replace the jsr with a bsr. */ /* Change the R_SH_USES reloc into an R_SH_PCDISP reloc, and - replace the jsr with a bsr. */ + replace the jsr with a bsr. */ irel->r_type = R_SH_PCDISP; irel->r_symndx = irelfn->r_symndx; if (sym.n_sclass != C_EXT) { /* If this needs to be changed because of future relaxing, - it will be handled here like other internal PCDISP - relocs. */ + it will be handled here like other internal PCDISP + relocs. */ bfd_put_16 (abfd, (bfd_vma) 0xb000 | ((foff >> 1) & 0xfff), contents + irel->r_vaddr - sec->vma); @@ -921,14 +929,14 @@ sh_relax_section (bfd *abfd, else { /* We can't fully resolve this yet, because the external - symbol value may be changed by future relaxing. We let - the final link phase handle it. */ + symbol value may be changed by future relaxing. We let + the final link phase handle it. */ bfd_put_16 (abfd, (bfd_vma) 0xb000, contents + irel->r_vaddr - sec->vma); } /* See if there is another R_SH_USES reloc referring to the same - register load. */ + register load. */ for (irelscan = internal_relocs; irelscan < irelend; irelscan++) if (irelscan->r_type == R_SH_USES && laddr == irelscan->r_vaddr - sec->vma + 4 + irelscan->r_offset) @@ -943,8 +951,8 @@ sh_relax_section (bfd *abfd, } /* Look for a R_SH_COUNT reloc on the location where the - function address is stored. Do this before deleting any - bytes, to avoid confusion about the address. */ + function address is stored. Do this before deleting any + bytes, to avoid confusion about the address. */ for (irelcount = internal_relocs; irelcount < irelend; irelcount++) if (irelcount->r_vaddr == paddr && irelcount->r_type == R_SH_COUNT) @@ -955,33 +963,35 @@ sh_relax_section (bfd *abfd, goto error_return; /* That will change things, so, just in case it permits some - other function call to come within range, we should relax - again. Note that this is not required, and it may be slow. */ + other function call to come within range, we should relax + again. Note that this is not required, and it may be slow. */ *again = TRUE; /* Now check whether we got a COUNT reloc. */ if (irelcount >= irelend) { - ((*_bfd_error_handler) - ("%B: 0x%lx: warning: could not find expected COUNT reloc", - abfd, (unsigned long) paddr)); + _bfd_error_handler + /* xgettext: c-format */ + (_("%pB: %#" PRIx64 ": warning: could not find expected COUNT reloc"), + abfd, (uint64_t) paddr); continue; } /* The number of uses is stored in the r_offset field. We've - just deleted one. */ + just deleted one. */ if (irelcount->r_offset == 0) { - ((*_bfd_error_handler) ("%B: 0x%lx: warning: bad count", - abfd, (unsigned long) paddr)); + /* xgettext: c-format */ + _bfd_error_handler (_("%pB: %#" PRIx64 ": warning: bad count"), + abfd, (uint64_t) paddr); continue; } --irelcount->r_offset; /* If there are no more uses, we can delete the address. Reload - the address from irelfn, in case it was changed by the - previous call to sh_relax_delete_bytes. */ + the address from irelfn, in case it was changed by the + previous call to sh_relax_delete_bytes. */ if (irelcount->r_offset == 0) { if (! sh_relax_delete_bytes (abfd, sec, @@ -1046,10 +1056,9 @@ sh_relax_section (bfd *abfd, return TRUE; error_return: - if (internal_relocs != NULL - && internal_relocs != coff_section_data (abfd, sec)->relocs) + if (internal_relocs != coff_section_data (abfd, sec)->relocs) free (internal_relocs); - if (contents != NULL && contents != coff_section_data (abfd, sec)->contents) + if (contents != coff_section_data (abfd, sec)->contents) free (contents); return FALSE; } @@ -1073,7 +1082,7 @@ sh_relax_delete_bytes (bfd *abfd, contents = coff_section_data (abfd, sec)->contents; - /* The deletion must stop at the next ALIGN reloc for an aligment + /* The deletion must stop at the next ALIGN reloc for an alignment power larger than the number of bytes we are deleting. */ irelalign = NULL; @@ -1140,7 +1149,7 @@ sh_relax_delete_bytes (bfd *abfd, irel->r_type = R_SH_UNUSED; /* If this is a PC relative reloc, see if the range it covers - includes the bytes we have deleted. */ + includes the bytes we have deleted. */ switch (irel->r_type) { default: @@ -1167,9 +1176,9 @@ sh_relax_delete_bytes (bfd *abfd, case R_SH_IMAGEBASE: #endif /* If this reloc is against a symbol defined in this - section, and the symbol will not be adjusted below, we - must check the addend to see it will put the value in - range to be adjusted, and hence must be changed. */ + section, and the symbol will not be adjusted below, we + must check the addend to see it will put the value in + range to be adjusted, and hence must be changed. */ bfd_coff_swap_sym_in (abfd, ((bfd_byte *) obj_coff_external_syms (abfd) + (irel->r_symndx @@ -1342,9 +1351,10 @@ sh_relax_delete_bytes (bfd *abfd, if (overflow) { - ((*_bfd_error_handler) - ("%B: 0x%lx: fatal: reloc overflow while relaxing", - abfd, (unsigned long) irel->r_vaddr)); + _bfd_error_handler + /* xgettext: c-format */ + (_("%pB: %#" PRIx64 ": fatal: reloc overflow while relaxing"), + abfd, (uint64_t) irel->r_vaddr); bfd_set_error (bfd_error_bad_value); return FALSE; } @@ -1368,8 +1378,8 @@ sh_relax_delete_bytes (bfd *abfd, continue; /* We always cache the relocs. Perhaps, if info->keep_memory is - FALSE, we should free them, if we are permitted to, when we - leave sh_coff_relax_section. */ + FALSE, we should free them, if we are permitted to, when we + leave sh_coff_relax_section. */ internal_relocs = (_bfd_coff_read_internal_relocs (abfd, o, TRUE, (bfd_byte *) NULL, FALSE, (struct internal_reloc *) NULL)); @@ -1412,9 +1422,9 @@ sh_relax_delete_bytes (bfd *abfd, if (!bfd_malloc_and_get_section (abfd, o, &ocontents)) return FALSE; /* We always cache the section contents. - Perhaps, if info->keep_memory is FALSE, we - should free them, if we are permitted to, - when we leave sh_coff_relax_section. */ + Perhaps, if info->keep_memory is FALSE, we + should free them, if we are permitted to, + when we leave sh_coff_relax_section. */ coff_section_data (abfd, o)->contents = ocontents; } } @@ -1437,8 +1447,8 @@ sh_relax_delete_bytes (bfd *abfd, if (obj_symbols (abfd) != NULL || obj_raw_syments (abfd) != NULL) { - ((*_bfd_error_handler) - ("%B: fatal: generic symbols retrieved before relaxing", abfd)); + _bfd_error_handler + (_("%pB: fatal: generic symbols retrieved before relaxing"), abfd); bfd_set_error (bfd_error_invalid_operation); return FALSE; } @@ -2036,7 +2046,7 @@ sh_insn_info (unsigned int insn) opend = op + min->count; /* Since the opcodes tables are sorted, we could use a binary - search here if the count were above some cutoff value. */ + search here if the count were above some cutoff value. */ for (; op < opend; op++) if (op->opcode == l) return op; @@ -2536,8 +2546,8 @@ sh_swap_insns (bfd * abfd, int type, add; /* There are a few special types of relocs that we don't want to - adjust. These relocs do not apply to the instruction itself, - but are only associated with the address. */ + adjust. These relocs do not apply to the instruction itself, + but are only associated with the address. */ type = irel->r_type; if (type == R_SH_ALIGN || type == R_SH_CODE @@ -2546,11 +2556,11 @@ sh_swap_insns (bfd * abfd, continue; /* If an R_SH_USES reloc points to one of the addresses being - swapped, we must adjust it. It would be incorrect to do this - for a jump, though, since we want to execute both - instructions after the jump. (We have avoided swapping - around a label, so the jump will not wind up executing an - instruction it shouldn't). */ + swapped, we must adjust it. It would be incorrect to do this + for a jump, though, since we want to execute both + instructions after the jump. (We have avoided swapping + around a label, so the jump will not wind up executing an + instruction it shouldn't). */ if (type == R_SH_USES) { bfd_vma off; @@ -2609,11 +2619,11 @@ sh_swap_insns (bfd * abfd, case R_SH_PCRELIMM8BY4: /* This reloc ignores the least significant 3 bits of - the program counter before adding in the offset. - This means that if ADDR is at an even address, the - swap will not affect the offset. If ADDR is an at an - odd address, then the instruction will be crossing a - four byte boundary, and must be adjusted. */ + the program counter before adding in the offset. + This means that if ADDR is at an even address, the + swap will not affect the offset. If ADDR is an at an + odd address, then the instruction will be crossing a + four byte boundary, and must be adjusted. */ if ((addr & 3) != 0) { insn = bfd_get_16 (abfd, loc); @@ -2629,9 +2639,10 @@ sh_swap_insns (bfd * abfd, if (overflow) { - ((*_bfd_error_handler) - ("%B: 0x%lx: fatal: reloc overflow while relaxing", - abfd, (unsigned long) irel->r_vaddr)); + _bfd_error_handler + /* xgettext: c-format */ + (_("%pB: %#" PRIx64 ": fatal: reloc overflow while relaxing"), + abfd, (uint64_t) irel->r_vaddr); bfd_set_error (bfd_error_bad_value); return FALSE; } @@ -2711,8 +2722,7 @@ sh_align_loads (bfd *abfd, return TRUE; error_return: - if (labels != NULL) - free (labels); + free (labels); return FALSE; } @@ -2745,7 +2755,7 @@ sh_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED, bfd_reloc_status_type rstat; /* Almost all relocs have to do with relaxing. If any work must - be done for them, it has been done in sh_relax_section. */ + be done for them, it has been done in sh_relax_section. */ if (rel->r_type != R_SH_IMM32 #ifdef COFF_WITH_PE && rel->r_type != R_SH_IMM32CE @@ -2766,8 +2776,9 @@ sh_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED, if (symndx < 0 || (unsigned long) symndx >= obj_raw_syment_count (input_bfd)) { - (*_bfd_error_handler) - ("%B: illegal symbol index %ld in relocs", + _bfd_error_handler + /* xgettext: c-format */ + (_("%pB: illegal symbol index %ld in relocs"), input_bfd, symndx); bfd_set_error (bfd_error_bad_value); return FALSE; @@ -2818,7 +2829,7 @@ sh_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED, else { sec = sections[symndx]; - val = (sec->output_section->vma + val = (sec->output_section->vma + sec->output_offset + sym->n_value - sec->vma); @@ -2867,7 +2878,7 @@ sh_relocate_section (bfd *output_bfd ATTRIBUTE_UNUSED, name = obj_coff_strings (input_bfd) + sym->_n._n_n._n_offset; else { - strncpy (buf, sym->_n._n_name, SYMNMLEN); + strncpy (buf, sym->_n._n_name, SYMNMLEN); buf[SYMNMLEN] = '\0'; name = buf; } @@ -2982,12 +2993,9 @@ sh_coff_get_relocated_section_contents (bfd *output_bfd, return data; error_return: - if (internal_relocs != NULL) - free (internal_relocs); - if (internal_syms != NULL) - free (internal_syms); - if (sections != NULL) - free (sections); + free (internal_relocs); + free (internal_syms); + free (sections); return NULL; } @@ -3031,7 +3039,7 @@ CREATE_LITTLE_COFF_TARGET_VEC (TARGET_SYM, TARGET_SHL_NAME, BFD_IS_RELAXABLE, /* Only recognize the small versions if the target was not defaulted. Otherwise we won't recognize the non default endianness. */ -static const bfd_target * +static bfd_cleanup coff_small_object_p (bfd *abfd) { if (abfd->target_defaulted) @@ -3117,9 +3125,9 @@ const bfd_target sh_coff_small_vec = BFD_ENDIAN_BIG, /* data byte order is big */ BFD_ENDIAN_BIG, /* header byte order is big */ - (HAS_RELOC | EXEC_P | /* object flags */ - HAS_LINENO | HAS_DEBUG | - HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE), + (HAS_RELOC | EXEC_P /* object flags */ + | HAS_LINENO | HAS_DEBUG + | HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE), (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), '_', /* leading symbol underscore */ @@ -3133,12 +3141,24 @@ const bfd_target sh_coff_small_vec = bfd_getb32, bfd_getb_signed_32, bfd_putb32, bfd_getb16, bfd_getb_signed_16, bfd_putb16, /* hdrs */ - {_bfd_dummy_target, coff_small_object_p, /* bfd_check_format */ - bfd_generic_archive_p, _bfd_dummy_target}, - {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */ - bfd_false}, - {bfd_false, coff_write_object_contents, /* bfd_write_contents */ - _bfd_write_archive_contents, bfd_false}, + { /* bfd_check_format */ + _bfd_dummy_target, + coff_small_object_p, + bfd_generic_archive_p, + _bfd_dummy_target + }, + { /* bfd_set_format */ + _bfd_bool_bfd_false_error, + coff_mkobject, + _bfd_generic_mkarchive, + _bfd_bool_bfd_false_error + }, + { /* bfd_write_contents */ + _bfd_bool_bfd_false_error, + coff_write_object_contents, + _bfd_write_archive_contents, + _bfd_bool_bfd_false_error + }, BFD_JUMP_TABLE_GENERIC (coff_small), BFD_JUMP_TABLE_COPY (coff), @@ -3150,9 +3170,9 @@ const bfd_target sh_coff_small_vec = BFD_JUMP_TABLE_LINK (coff), BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic), - & sh_coff_small_le_vec, + &sh_coff_small_le_vec, - & bfd_coff_small_swap_table + &bfd_coff_small_swap_table }; const bfd_target sh_coff_small_le_vec = @@ -3162,9 +3182,9 @@ const bfd_target sh_coff_small_le_vec = BFD_ENDIAN_LITTLE, /* data byte order is little */ BFD_ENDIAN_LITTLE, /* header byte order is little endian too*/ - (HAS_RELOC | EXEC_P | /* object flags */ - HAS_LINENO | HAS_DEBUG | - HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE), + (HAS_RELOC | EXEC_P /* object flags */ + | HAS_LINENO | HAS_DEBUG + | HAS_SYMS | HAS_LOCALS | WP_TEXT | BFD_IS_RELAXABLE), (SEC_HAS_CONTENTS | SEC_ALLOC | SEC_LOAD | SEC_RELOC), '_', /* leading symbol underscore */ @@ -3178,12 +3198,24 @@ const bfd_target sh_coff_small_le_vec = bfd_getl32, bfd_getl_signed_32, bfd_putl32, bfd_getl16, bfd_getl_signed_16, bfd_putl16, /* hdrs */ - {_bfd_dummy_target, coff_small_object_p, /* bfd_check_format */ - bfd_generic_archive_p, _bfd_dummy_target}, - {bfd_false, coff_mkobject, _bfd_generic_mkarchive, /* bfd_set_format */ - bfd_false}, - {bfd_false, coff_write_object_contents, /* bfd_write_contents */ - _bfd_write_archive_contents, bfd_false}, + { /* bfd_check_format */ + _bfd_dummy_target, + coff_small_object_p, + bfd_generic_archive_p, + _bfd_dummy_target + }, + { /* bfd_set_format */ + _bfd_bool_bfd_false_error, + coff_mkobject, + _bfd_generic_mkarchive, + _bfd_bool_bfd_false_error + }, + { /* bfd_write_contents */ + _bfd_bool_bfd_false_error, + coff_write_object_contents, + _bfd_write_archive_contents, + _bfd_bool_bfd_false_error + }, BFD_JUMP_TABLE_GENERIC (coff_small), BFD_JUMP_TABLE_COPY (coff), @@ -3195,8 +3227,8 @@ const bfd_target sh_coff_small_le_vec = BFD_JUMP_TABLE_LINK (coff), BFD_JUMP_TABLE_DYNAMIC (_bfd_nodynamic), - & sh_coff_small_vec, + &sh_coff_small_vec, - & bfd_coff_small_swap_table + &bfd_coff_small_swap_table }; #endif