X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=binutils%2Fbinutils.texi;h=4f263d64f2ffda21e68b93f0112e94a373804f4d;hb=cf055d540cdf37fb33e63e20c692d56132f4d983;hp=053df4a50d753aa55d866c5b899cef85e1506abf;hpb=16c3e32aa01eb15913e7a117b93e1c34c0837c95;p=deliverable%2Fbinutils-gdb.git

diff --git a/binutils/binutils.texi b/binutils/binutils.texi
index 053df4a50d..4f263d64f2 100644
--- a/binutils/binutils.texi
+++ b/binutils/binutils.texi
@@ -5,19 +5,35 @@
 @ifinfo
 @format
 START-INFO-DIR-ENTRY
-* Binutils: (binutils).         The GNU binary utilities "ar", "objcopy",
-				"objdump", "nm", "nlmconv", "size", 
-                                "strings", "strip", and "ranlib".
+* Binutils: (binutils).         The GNU binary utilities.
+* ar: (binutils)ar.               Create, modify, and extract from archives
+* nm: (binutils)nm.               List symbols from object files
+* objcopy: (binutils)objcopy.	  Copy and translate object files
+* objdump: (binutils)objdump.     Display information from object files
+* ranlib: (binutils)ranlib.       Generate index to archive contents
+* readelf: (binutils)readelf.	  Display the contents of ELF format files.
+* size: (binutils)size.           List section sizes and total size
+* strings: (binutils)strings.     List printable strings from files
+* strip: (binutils)strip.         Discard symbols
+* c++filt: (binutils)c++filt.	  Filter to demangle encoded C++ symbols
+* cxxfilt: (binutils)c++filt.     MS-DOS name for c++filt
+* addr2line: (binutils)addr2line. Convert addresses to file and line
+* nlmconv: (binutils)nlmconv.     Converts object code into an NLM
+* windres: (binutils)windres.	  Manipulate Windows resources
+* dlltool: (binutils)dlltool.	  Create files needed to build and use DLLs
 END-INFO-DIR-ENTRY
 @end format
 @end ifinfo
 
 @ifinfo
-Copyright @copyright{} 1991, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000 Free Software Foundation, Inc.
 
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+      Permission is granted to copy, distribute and/or modify this document
+      under the terms of the GNU Free Documentation License, Version 1.1
+      or any later version published by the Free Software Foundation;
+      with no Invariant Sections, with no Front-Cover Texts, and with no
+      Back-Cover Texts.  A copy of the license is included in the
+      section entitled "GNU Free Documentation License".
 
 @ignore
 Permission is granted to process this file through TeX and print the
@@ -26,25 +42,17 @@ notice identical to this one except for the removal of this paragraph
 (this paragraph not being relevant to the printed manual).
 
 @end ignore
-
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
-
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
 @end ifinfo
 
 @synindex ky cp
 @c
 @c This file documents the GNU binary utilities "ar", "ld", "objcopy",
-@c  "objdump", "nm", "size", "strings", "strip", and "ranlib".
+@c  "objdump", "nm", "size", "strings", "strip", "readelf" and "ranlib".
 @c
-@c Copyright (C) 1991, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
+@c Copyright (C) 1991, 92, 93, 94, 95, 96, 97, 98, 99, 2000 Free Software Foundation, Inc.
 @c 
 @c This text may be freely distributed under the terms of the GNU
-@c General Public License.
+@c Free Documentation License.
 @c
 
 @setchapternewpage odd
@@ -66,19 +74,15 @@ into another language, under the above conditions for modified versions.
 @end tex
 
 @vskip 0pt plus 1filll
-Copyright @copyright{} 1991, 92, 93, 94, 95, 1996 Free Software Foundation, Inc.
-
-Permission is granted to make and distribute verbatim copies of
-this manual provided the copyright notice and this permission notice
-are preserved on all copies.
+Copyright @copyright{} 1991, 92, 93, 94, 95, 96, 97, 1998, 2000 Free Software Foundation, Inc.
 
-Permission is granted to copy and distribute modified versions of this
-manual under the conditions for verbatim copying, provided also that
-the entire resulting derived work is distributed under the terms of a
-permission notice identical to this one.
+      Permission is granted to copy, distribute and/or modify this document
+      under the terms of the GNU Free Documentation License, Version 1.1
+      or any later version published by the Free Software Foundation;
+      with no Invariant Sections, with no Front-Cover Texts, and with no
+      Back-Cover Texts.  A copy of the license is included in the
+      section entitled "GNU Free Documentation License".
 
-Permission is granted to copy and distribute translations of this manual
-into another language, under the above conditions for modified versions.
 @end titlepage
 
 @node Top
@@ -105,6 +109,9 @@ Display information from object files
 @item ranlib
 Generate index to archive contents
 
+@item readelf
+Display the contents of ELF format files.
+
 @item size
 List file section sizes and total size
 
@@ -115,26 +122,47 @@ List printable strings from files
 Discard symbols
 
 @item c++filt
-Demangle encoded C++ symbols
+Demangle encoded C++ symbols (on MS-DOS, this program is named
+@code{cxxfilt})
+
+@item addr2line
+Convert addresses into file names and line numbers
 
 @item nlmconv
 Convert object code into a Netware Loadable Module
+
+@item windres
+Manipulate Windows resources
+
+@item dlltool
+Create the files needed to build and use Dynamic Link Libraries
 @end table
 @end iftex
 
+This document is distributed under the terms of the GNU Free
+Documentation License.  A copy of the license is included in the
+section entitled "GNU Free Documentation License".
+
 @menu
 * ar::                          Create, modify, and extract from archives
 * nm::                          List symbols from object files
 * objcopy::			Copy and translate object files
 * objdump::                     Display information from object files
 * ranlib::                      Generate index to archive contents
+* readelf::			Display the contents of ELF format files.
 * size::                        List section sizes and total size
 * strings::                     List printable strings from files
 * strip::                       Discard symbols
 * c++filt::			Filter to demangle encoded C++ symbols
+* cxxfilt: c++filt.             MS-DOS name for c++filt
+* addr2line::			Convert addresses to file and line
 * nlmconv::                     Converts object code into an NLM
+* windres::			Manipulate Windows resources
+* dlltool::			Create files needed to build and use DLLs
 * Selecting The Target System:: How these utilities determine the target.
-* Index::                       
+* Reporting Bugs::              Reporting Bugs
+* GNU Free Documentation License::  GNU Free Documentation License
+* Index::                       Index
 @end menu
 
 @node ar
@@ -144,7 +172,7 @@ Convert object code into a Netware Loadable Module
 @cindex archives
 @cindex collections of files
 @smallexample
-ar [-]@var{p}[@var{mod} [@var{relpos}]] @var{archive} [@var{member}@dots{}]
+ar [-]@var{p}[@var{mod} [@var{relpos}] [@var{count}]] @var{archive} [@var{member}@dots{}]
 ar -M [ <mri-script ]
 @end smallexample
 
@@ -202,7 +230,7 @@ program.
 @section Controlling @code{ar} on the command line
 
 @smallexample
-ar [-]@var{p}[@var{mod} [@var{relpos}]] @var{archive} [@var{member}@dots{}]
+ar [-X32_64] [-]@var{p}[@var{mod} [@var{relpos}] [@var{count}]] @var{archive} [@var{member}@dots{}]
 @end smallexample
 
 @cindex Unix compatibility, @code{ar}
@@ -258,7 +286,7 @@ printed.
 
 @item q
 @cindex quick append to archive
-@emph{Quick append}; add the files @var{member}@dots{} to the end of
+@emph{Quick append}; Historically, add the files @var{member}@dots{} to the end of
 @var{archive}, without checking for replacement.
 
 The modifiers @samp{a}, @samp{b}, and @samp{i} do @emph{not} affect this
@@ -270,6 +298,9 @@ Since the point of this operation is speed, the archive's symbol table
 index is not updated, even if it already existed; you can use @samp{ar s} or
 @code{ranlib} explicitly to update the symbol table index.
 
+However, too many different systems assume quick append rebuilds the
+index, so GNU ar implements @code{q} as a synonym for @code{r}.
+
 @item r
 @cindex replacement in archive
 Insert the files @var{member}@dots{} into @var{archive} (with
@@ -363,12 +394,25 @@ This modifier is accepted but not used.
 @c whaffor ar l modifier??? presumably compat; with
 @c what???---doc@@cygnus.com, 25jan91 
 
+@item N
+Uses the @var{count} parameter.  This is used if there are multiple
+entries in the archive with the same name.  Extract or delete instance
+@var{count} of the given name from the archive.
+
 @item o
 @cindex dates in archive
 Preserve the @emph{original} dates of members when extracting them.  If
 you do not specify this modifier, files extracted from the archive
 are stamped with the time of extraction.
 
+@item P
+Use the full path name when matching names in the archive.  @sc{gnu}
+@code{ar} can not create an archive with a full path name (such archives
+are not POSIX complaint), but other archive creators can.  This option
+will cause @sc{gnu} @code{ar} to match file names using a complete path
+name, which can be convenient when extracting a single file from an
+archive created by another tool.
+
 @item s
 @cindex writing archive index
 Write an object-file index into the archive, or update an existing one,
@@ -376,6 +420,14 @@ even if no other change is made to the archive.  You may use this modifier
 flag either with any operation, or alone.  Running @samp{ar s} on an
 archive is equivalent to running @samp{ranlib} on it.
 
+@item S
+@cindex not writing archive index
+Do not generate an archive symbol table.  This can speed up building a
+large library in several steps.  The resulting archive can not be used
+with the linker.  In order to build a symbol table, you must omit the
+@samp{S} modifier on the last execution of @samp{ar}, or you must run
+@samp{ranlib} on the archive.
+
 @item u
 @cindex updating an archive
 Normally, @samp{ar r}@dots{} inserts all files
@@ -395,6 +447,12 @@ when the modifier @samp{v} is appended.
 This modifier shows the version number of @code{ar}.
 @end table
 
+@code{ar} ignores an initial option spelt @code{-X32_64}, for
+compatibility with AIX.  The behaviour produced by this option is the
+default for GNU @code{ar}.  @code{ar} does not support any of the other
+@code{-X} options; in particular, it does not support @code{-X32}
+which is the default for AIX @code{ar}.
+
 @node ar scripts
 @section Controlling @code{ar} with a script
 
@@ -474,7 +532,7 @@ Add each named @var{member} as a module in the current archive.
 Requires prior use of @code{OPEN} or @code{CREATE}.
 
 @item CLEAR
-Discard the contents of the current archive, cancelling the effect of
+Discard the contents of the current archive, canceling the effect of
 any operations since the last @code{SAVE}.  May be executed (with no
 effect) even if  no current archive is specified.
 
@@ -526,7 +584,7 @@ Requires prior use of @code{OPEN} or @code{CREATE}.
 @item LIST
 Display full contents of the current archive, in ``verbose'' style
 regardless of the state of @code{VERBOSE}.  The effect is like @samp{ar
-tv @var{archive}}).  (This single command is a @sc{gnu} @code{ld}
+tv @var{archive}}.  (This single command is a @sc{gnu} @code{ar}
 enhancement, rather than present for MRI compatibility.)
 
 Requires prior use of @code{OPEN} or @code{CREATE}.
@@ -574,18 +632,18 @@ The @sc{gnu} linker @code{ld} is now described in a separate manual.
 
 @smallexample
 nm [ -a | --debug-syms ]  [ -g | --extern-only ]
-   [ -B ]  [ -C | --demangle ] [ -D | --dynamic ]
+   [ -B ]  [ -C | --demangle[=@var{style}] ] [ -D | --dynamic ]
    [ -s | --print-armap ]  [ -A | -o | --print-file-name ]
    [ -n | -v | --numeric-sort ]  [ -p | --no-sort ]
    [ -r | --reverse-sort ]  [ --size-sort ] [ -u | --undefined-only ]
    [ -t @var{radix} | --radix=@var{radix} ] [ -P | --portability ]
    [ --target=@var{bfdname} ] [ -f @var{format} | --format=@var{format} ]
-   [ --defined-only ] [-l | --line-numbers ]
-   [ --no-demangle ] [ -V | --version ]  [ --help ]  [ @var{objfile}@dots{} ]
+   [ --defined-only ] [-l | --line-numbers ]  [ --no-demangle ]
+   [ -V | --version ]  [ -X 32_64 ]  [ --help ]  [ @var{objfile}@dots{} ]
 @end smallexample
 
 @sc{gnu} @code{nm} lists the symbols from object files @var{objfile}@dots{}.
-If no object files are listed as arguments, @code{nm} assumes
+If no object files are listed as arguments, @code{nm} assumes the file
 @file{a.out}.
 
 For each symbol, @code{nm} shows:
@@ -644,11 +702,18 @@ The symbol is in the text (code) section.
 @item U
 The symbol is undefined.
 
+@item V
+The symbol is a weak object.  When a weak defined symbol is linked with
+a normal defined symbol, the normal defined symbol is used with no error.
+When a weak undefined symbol is linked and the symbol is not defined,
+the value of the weak symbol becomes zero with no error.
+
 @item W
-The symbol is weak.  When a weak defined symbol is linked with a normal
-defined symbol, the normal defined symbol is used with no error.  When a
-weak undefined symbol is linked and the symbol is not defined, the value
-of the weak symbol becomes zero with no error.
+The symbol is a weak symbol that has not been specifically tagged as a
+weak object symbol.  When a weak defined symbol is linked with a normal
+defined symbol, the normal defined symbol is used with no error.
+When a weak undefined symbol is linked and the symbol is not defined,
+the value of the weak symbol becomes zero with no error.
 
 @item -
 The symbol is a stabs symbol in an a.out object file.  In this case, the
@@ -675,7 +740,7 @@ equivalent.
 @cindex input file name
 @cindex file name
 @cindex source file name
-Precede each symbol by the name of the input file (or archive element)
+Precede each symbol by the name of the input file (or archive member)
 in which it was found, rather than identifying the input file once only,
 before all of its symbols.
 
@@ -691,12 +756,14 @@ listed.
 The same as @samp{--format=bsd} (for compatibility with the MIPS @code{nm}).
 
 @item -C
-@itemx --demangle
-@cindex demangling C++ symbols
+@itemx --demangle[=@var{style}]
+@cindex demangling in nm
 Decode (@dfn{demangle}) low-level symbol names into user-level names.
 Besides removing any initial underscore prepended by the system, this
-makes C++ function names readable.  @xref{c++filt}, for more information
-on demangling.
+makes C++ function names readable. Different compilers have different
+mangling styles. The optional demangling style argument can be used to 
+choose an appropriate demangling style for your compiler. @xref{c++filt}, 
+for more information on demangling.
 
 @item --no-demangle
 Do not demangle low-level symbol names.  This is the default.
@@ -790,6 +857,12 @@ Display only defined symbols for each object file.
 @itemx --version
 Show the version number of @code{nm} and exit.
 
+@item -X
+This option is ignored for compatibility with the AIX version of
+@code{nm}.  It takes one parameter which must be the string
+@code{32_64}.  The default mode of AIX @code{nm} corresponds
+to @code{-X 32}, which is not supported by @sc{gnu} @code{nm}.
+
 @item --help
 Show a summary of the options to @code{nm} and exit.
 @end table
@@ -804,19 +877,26 @@ objcopy [ -F @var{bfdname} | --target=@var{bfdname} ]
         [ -S | --strip-all ]  [ -g | --strip-debug ]
         [ -K @var{symbolname} | --keep-symbol=@var{symbolname} ]
         [ -N @var{symbolname} | --strip-symbol=@var{symbolname} ]
+        [ -L @var{symbolname} | --localize-symbol=@var{symbolname} ]
+        [ -W @var{symbolname} | --weaken-symbol=@var{symbolname} ]
         [ -x | --discard-all ]  [ -X | --discard-locals ]
         [ -b @var{byte} | --byte=@var{byte} ]
         [ -i @var{interleave} | --interleave=@var{interleave} ]
+        [ -j @var{sectionname} | --only-section=@var{sectionname} ]
         [ -R @var{sectionname} | --remove-section=@var{sectionname} ]
-        [ --debugging ]
+        [ -p | --preserve-dates ] [ --debugging ]
         [ --gap-fill=@var{val} ] [ --pad-to=@var{address} ]
         [ --set-start=@var{val} ] [ --adjust-start=@var{incr} ]
-        [ --adjust-vma=@var{incr} ]
-        [ --adjust-section-vma=@var{section}@{=,+,-@}@var{val} ]
-        [ --adjust-warnings ] [ --no-adjust-warnings ]
-        [ --set-section-flags=@var{section}=@var{flags} ]
-        [ --add-section=@var{sectionname}=@var{filename} ]
-        [ --remove-leading-char ]
+        [ --change-addresses=@var{incr} ]
+        [ --change-section-address @var{section}@{=,+,-@}@var{val} ]
+        [ --change-section-lma @var{section}@{=,+,-@}@var{val} ]
+        [ --change-section-vma @var{section}@{=,+,-@}@var{val} ]
+        [ --change-warnings ] [ --no-change-warnings ]
+        [ --set-section-flags @var{section}=@var{flags} ]
+        [ --add-section @var{sectionname}=@var{filename} ]
+        [ --change-leading-char ] [ --remove-leading-char ]
+        [ --srec-len=@var{ival} ] [ --srec-forceS3 ]
+        [ --redefine-sym @var{old}=@var{new} ] [ --weaken ]
         [ -v | --verbose ] [ -V | --version ]  [ --help ]
         @var{infile} [@var{outfile}]
 @end smallexample
@@ -826,6 +906,9 @@ file to another.  @code{objcopy} uses the @sc{gnu} @sc{bfd} Library to
 read and write the object files.  It can write the destination object
 file in a format different from that of the source object file.  The
 exact behavior of @code{objcopy} is controlled by command-line options.
+Note that @code{objcopy} should be able to copy a fully linked file
+between any two formats. However, copying a relocatable object file
+between any two formats may not work as expected.
 
 @code{objcopy} creates temporary files to do its translations and
 deletes them afterward.  @code{objcopy} uses @sc{bfd} to do all its
@@ -846,12 +929,12 @@ the load address of the lowest section copied into the output file.
 When generating an S-record or a raw binary file, it may be helpful to
 use @samp{-S} to remove sections containing debugging information.  In
 some cases @samp{-R} will be useful to remove sections which contain
-information which is not needed by the binary file.
+information that is not needed by the binary file.
 
 @table @code
 @item @var{infile}
 @itemx @var{outfile}
-The source and output files, respectively.
+The input and output files, respectively.
 If you do not specify @var{outfile}, @code{objcopy} creates a
 temporary file and destructively renames the result with
 the name of @var{infile}.
@@ -872,6 +955,12 @@ Use @var{bfdname} as the object format for both the input and the output
 file; i.e., simply transfer data from source to destination with no
 translation.  @xref{Target Selection}, for more information.
 
+@item -j @var{sectionname}
+@itemx --only-section=@var{sectionname}
+Copy only the named section from the input file to the output file.
+This option may be given more than once.  Note that using this option
+inappropriately may make the output file unusable.
+
 @item -R @var{sectionname}
 @itemx --remove-section=@var{sectionname}
 Remove any section named @var{sectionname} from the output file.  This
@@ -897,8 +986,16 @@ be given more than once.
 @item -N @var{symbolname}
 @itemx --strip-symbol=@var{symbolname}
 Do not copy symbol @var{symbolname} from the source file.  This option
-may be given more than once, and may be combined with strip options
-other than @code{-K}.
+may be given more than once.
+
+@item -L @var{symbolname}
+@itemx --localize-symbol=@var{symbolname}
+Make symbol @var{symbolname} local to the file, so that it is not
+visible externally.  This option may be given more than once.
+
+@item -W @var{symbolname}
+@itemx --weaken-symbol=@var{symbolname}
+Make symbol @var{symbolname} weak. This option may be given more than once.
 
 @item -x
 @itemx --discard-all
@@ -926,58 +1023,105 @@ copy with the @var{-b} or @samp{--byte} option.  The default is 4.
 @code{objcopy} ignores this option if you do not specify either @samp{-b} or
 @samp{--byte}.
 
+@item -p
+@itemx --preserve-dates
+Set the access and modification dates of the output file to be the same
+as those of the input file.
+
 @item --debugging
 Convert debugging information, if possible.  This is not the default
 because only certain debugging formats are supported, and the
 conversion process can be time consuming.
 
 @item --gap-fill @var{val}
-Fill gaps between sections with @var{val}.  This is done by increasing
+Fill gaps between sections with @var{val}.  This operation applies to
+the @emph{load address} (LMA) of the sections.  It is done by increasing
 the size of the section with the lower address, and filling in the extra
 space created with @var{val}.
 
 @item --pad-to @var{address}
-Pad the output file up to the virtual address @var{address}.  This is
+Pad the output file up to the load address @var{address}.  This is
 done by increasing the size of the last section.  The extra space is
 filled in with the value specified by @samp{--gap-fill} (default zero).
 
 @item --set-start @var{val}
-Set the address of the new file to @var{val}.  Not all object file
+Set the start address of the new file to @var{val}.  Not all object file
 formats support setting the start address.
 
-@item --adjust-start @var{incr}
-Adjust the start address by adding @var{incr}.  Not all object file
+@item --change-start @var{incr}
+@itemx --adjust-start @var{incr}
+@cindex changing start address
+Change the start address by adding @var{incr}.  Not all object file
 formats support setting the start address.
 
-@item --adjust-vma @var{incr}
-Adjust the address of all sections, as well as the start address, by
-adding @var{incr}.  Some object file formats do not permit section
-addresses to be changed arbitrarily.  Note that this does not relocate
-the sections; if the program expects sections to be loaded at a certain
-address, and this option is used to change the sections such that they
-are loaded at a different address, the program may fail.
-
-@item --adjust-section-vma @var{section}@{=,+,-@}@var{val}
-Set or adjust the address of the named @var{section}.  If @samp{=} is
-used, the section address is set to @var{val}.  Otherwise, @var{val} is
-added to or subtracted from the section address.  See the comments under
-@samp{--adjust-vma}, above.  If @var{section} does not exist in the
-input file, a warning will be issued, unless @samp{--no-adjust-warnings}
-is used.
-
-@item --adjust-warnings
-If @samp{--adjust-section-vma} is used, and the named section does not
-exist, issue a warning.  This is the default.
-
-@item --no-adjust-warnings
-Do not issue a warning if @samp{--adjust-section-vma} is used, even if
-the named section does not exist.
+@item --change-addresses @var{incr}
+@itemx --adjust-vma @var{incr}
+@cindex changing object addresses
+Change the VMA and LMA addresses of all sections, as well as the start
+address, by adding @var{incr}.  Some object file formats do not permit
+section addresses to be changed arbitrarily.  Note that this does not
+relocate the sections; if the program expects sections to be loaded at a
+certain address, and this option is used to change the sections such
+that they are loaded at a different address, the program may fail. 
+
+@item --change-section-address @var{section}@{=,+,-@}@var{val}
+@itemx --adjust-section-vma @var{section}@{=,+,-@}@var{val}
+@cindex changing section address
+Set or change both the VMA address and the LMA address of the named
+@var{section}.  If @samp{=} is used, the section address is set to
+@var{val}.  Otherwise, @var{val} is added to or subtracted from the
+section address.  See the comments under @samp{--change-addresses},
+above. If @var{section} does not exist in the input file, a warning will
+be issued, unless @samp{--no-change-warnings} is used.
+
+@item --change-section-lma @var{section}@{=,+,-@}@var{val}
+@cindex changing section LMA
+Set or change the LMA address of the named @var{section}.  The LMA
+address is the address where the section will be loaded into memory at
+program load time.  Normally this is the same as the VMA address, which
+is the address of the section at program run time, but on some systems,
+especially those where a program is held in ROM, the two can be
+different.  If @samp{=} is used, the section address is set to
+@var{val}.  Otherwise, @var{val} is added to or subtracted from the
+section address.  See the comments under @samp{--change-addresses},
+above.  If @var{section} does not exist in the input file, a warning
+will be issued, unless @samp{--no-change-warnings} is used.  
+
+@item --change-section-vma @var{section}@{=,+,-@}@var{val}
+@cindex changing section VMA
+Set or change the VMA address of the named @var{section}.  The VMA
+address is the address where the section will be located once the
+program has started executing.  Normally this is the same as the LMA
+address, which is the address where the section will be loaded into
+memory, but on some systems, especially those where a program is held in
+ROM, the two can be different.  If @samp{=} is used, the section address
+is set to @var{val}.  Otherwise, @var{val} is added to or subtracted
+from the section address.  See the comments under
+@samp{--change-addresses}, above.  If @var{section} does not exist in
+the input file, a warning will be issued, unless
+@samp{--no-change-warnings} is used.   
+
+@item --change-warnings
+@itemx --adjust-warnings
+If @samp{--change-section-address} or @samp{--change-section-lma} or
+@samp{--change-section-vma} is used, and the named section does not
+exist, issue a warning.  This is the default. 
+
+@item --no-change-warnings
+@itemx --no-adjust-warnings
+Do not issue a warning if @samp{--change-section-address} or
+@samp{--adjust-section-lma} or @samp{--adjust-section-vma} is used, even
+if the named section does not exist. 
 
 @item --set-section-flags @var{section}=@var{flags}
 Set the flags for the named section.  The @var{flags} argument is a
 comma separated string of flag names.  The recognized names are
-@samp{alloc}, @samp{load}, @samp{readonly}, @samp{code}, @samp{data},
-and @samp{rom}.  Not all flags are meaningful for all object file
+@samp{alloc}, @samp{contents}, @samp{load}, @samp{noload},
+@samp{readonly}, @samp{code}, @samp{data}, @samp{rom}, @samp{share}, and
+@samp{debug}.  You can set the @samp{contents} flag for a section which
+does not have contents, but it is not meaningful to clear the
+@samp{contents} flag of a section which does have contents--just remove
+the section instead.  Not all flags are meaningful for all object file
 formats.
 
 @item --add-section @var{sectionname}=@var{filename}
@@ -986,13 +1130,46 @@ contents of the new section are taken from the file @var{filename}.  The
 size of the section will be the size of the file.  This option only
 works on file formats which can support sections with arbitrary names.
 
+@item --change-leading-char
+Some object file formats use special characters at the start of
+symbols.  The most common such character is underscore, which compilers
+often add before every symbol.  This option tells @code{objcopy} to
+change the leading character of every symbol when it converts between
+object file formats.  If the object file formats use the same leading
+character, this option has no effect.  Otherwise, it will add a
+character, or remove a character, or change a character, as
+appropriate.
+
 @item --remove-leading-char
 If the first character of a global symbol is a special symbol leading
 character used by the object file format, remove the character.  The
 most common symbol leading character is underscore.  This option will
 remove a leading underscore from all global symbols.  This can be useful
 if you want to link together objects of different file formats with
-different conventions for symbol names.
+different conventions for symbol names.  This is different from
+@code{--change-leading-char} because it always changes the symbol name
+when appropriate, regardless of the object file format of the output
+file.
+
+@item --srec-len=@var{ival}
+Meaningful only for srec output.  Set the maximum length of the Srecords
+being produced to @var{ival}.  This length covers both address, data and
+crc fields.
+
+@item --srec-forceS3
+Meaningful only for srec output.  Avoid generation of S1/S2 records, 
+creating S3-only record format.
+
+@item --redefine-sym @var{old}=@var{new}
+Change the name of a symbol @var{old}, to @var{new}.  This can be useful
+when one is trying link two things together for which you have no
+source, and there are name collisions.
+
+@item --weaken
+Change all global symbols in the file to be weak.  This can be useful
+when building an object which will be linked against other objects using
+the @code{-R} option to the linker.  This option is only effective when
+using an object file format which supports weak symbols.
 
 @item -V
 @itemx --version
@@ -1015,20 +1192,38 @@ Show a summary of the options to @code{objcopy}.
 
 @smallexample
 objdump [ -a | --archive-headers ] 
-        [ -b @var{bfdname} | --target=@var{bfdname} ] [ --debugging ]
-        [ -d | --disassemble ]  [ -D | --disassemble-all ] 
+        [ -b @var{bfdname} | --target=@var{bfdname} ] 
+        [ -C | --demangle[=@var{style}] ]
+        [ -d | --disassemble ]
+        [ -D | --disassemble-all ]
+        [ -z | --disassemble-zeroes ]
         [ -EB | -EL | --endian=@{big | little @} ]
         [ -f | --file-headers ]
-        [ -h | --section-headers | --headers ]  [ -i | --info ]
+        [ --file-start-context ]
+        [ -g | --debugging ]
+        [ -h | --section-headers | --headers ]
+        [ -i | --info ]
         [ -j @var{section} | --section=@var{section} ]
-        [ -l | --line-numbers ] [ -S | --source ]
+        [ -l | --line-numbers ]
+        [ -S | --source ]
         [ -m @var{machine} | --architecture=@var{machine} ]
-        [ -r | --reloc ] [ -R | --dynamic-reloc ]
-        [ -s | --full-contents ]  [ --stabs ]
-        [ -t | --syms ] [ -T | --dynamic-syms ] [ -x | --all-headers ]
-        [ -w | --wide ] [ --start-address=@var{address} ]
-        [ --stop-address=@var{address} ] [ --show-raw-insn ]
-        [ --version ]  [ --help ]
+        [ -M @var{options} | --disassembler-options=@var{options}]
+        [ -p | --private-headers ]
+        [ -r | --reloc ]
+        [ -R | --dynamic-reloc ]
+        [ -s | --full-contents ]
+        [ -G | --stabs ]
+        [ -t | --syms ]
+        [ -T | --dynamic-syms ]
+        [ -x | --all-headers ]
+        [ -w | --wide ]
+        [ --start-address=@var{address} ]
+        [ --stop-address=@var{address} ]
+        [ --prefix-addresses]
+        [ --[no-]show-raw-insn ]
+        [ --adjust-vma=@var{offset} ]
+        [ -V | --version ]
+        [ -H | --help ]
         @var{objfile}@dots{}
 @end smallexample
 
@@ -1043,7 +1238,8 @@ specify archives, @code{objdump} shows information on each of the member
 object files.
 
 The long and short forms of options, shown here as alternatives, are
-equivalent.  At least one option besides @samp{-l} must be given.
+equivalent.  At least one option from the list
+@samp{-a,-d,-D,-f,-g,-G,-h,-H,-p,-r,-R,-S,-t,-T,-V,-x} must be given. 
 
 @table @code
 @item -a
@@ -1054,6 +1250,15 @@ header information (in a format similar to @samp{ls -l}).  Besides the
 information you could list with @samp{ar tv}, @samp{objdump -a} shows
 the object file format of each archive member.
 
+@item --adjust-vma=@var{offset}
+@cindex section addresses in objdump
+@cindex VMA in objdump
+When dumping information, first add @var{offset} to all the section
+addresses.  This is useful if the section addresses do not correspond to
+the symbol table, which can happen when putting sections at particular
+addresses when using a format which can not represent section addresses,
+such as a.out.
+
 @item -b @var{bfdname}
 @itemx --target=@var{bfdname}
 @cindex object code format
@@ -1072,6 +1277,17 @@ file in the format produced by Oasys compilers.  You can list the
 formats available with the @samp{-i} option.
 @xref{Target Selection}, for more information.
 
+@item -C
+@itemx --demangle[=@var{style}]
+@cindex demangling in objdump
+Decode (@dfn{demangle}) low-level symbol names into user-level names.
+Besides removing any initial underscore prepended by the system, this
+makes C++ function names readable.  Different compilers have different
+mangling styles. The optional demangling style argument can be used to 
+choose an appropriate demangling style for your compiler. @xref{c++filt}, 
+for more information on demangling.
+
+@item -G
 @item --debugging
 Display debugging information.  This attempts to parse debugging
 information stored in the file and print it out using a C like syntax.
@@ -1090,6 +1306,15 @@ expected to contain instructions.
 Like @samp{-d}, but disassemble the contents of all sections, not just
 those expected to contain instructions.
 
+@item --prefix-addresses
+When disassembling, print the complete address on each line.  This is
+the older disassembly format.
+
+@item --disassemble-zeroes
+Normally the disassembly output will skip blocks of zeroes.  This
+option directs the disassembler to disassemble those blocks, just like
+any other data.
+
 @item -EB
 @itemx -EL
 @itemx --endian=@{big|little@}
@@ -1105,6 +1330,12 @@ does not describe endianness information, such as S-records.
 Display summary information from the overall header of
 each of the @var{objfile} files.
 
+@item --file-start-context
+@cindex source code context
+Specify that when displaying interlisted source code/disassembly
+(assumes '-S') from a file that has not yet been displayed, extend the
+context to the start of the file.
+
 @item -h
 @itemx --section-header
 @itemx --header
@@ -1148,10 +1379,41 @@ Only useful with @samp{-d}, @samp{-D}, or @samp{-r}.
 @cindex architecture
 @cindex disassembly architecture
 Specify the architecture to use when disassembling object files.  This
-can be useful when disasembling object files which do not describe
+can be useful when disassembling object files which do not describe
 architecture information, such as S-records.  You can list the available
 architectures with the @samp{-i} option.
 
+@item -M @var{options}
+@itemx --disassembler-options=@var{options}
+Pass target specific information to the disassembler.  Only supported on
+some targets.
+
+If the target is an ARM architecture then this switch can be used to
+select which register name set is used during disassembler.  Specifying
+@samp{-M reg-name-std} (the default) will select the register names as
+used in ARM's instruction set documentation, but with register 13 called
+'sp', register 14 called 'lr' and register 15 called 'pc'.  Specifying
+@samp{-M reg-names-apcs} will select the name set used by the ARM
+Procedure Call Standard, whilst specifying @samp{-M reg-names-raw} will
+just use @samp{r} followed by the register number.
+
+There are also two variants on the APCS register naming scheme enabled
+by @samp{-M reg-names-atpcs} and @samp{-M reg-names-special-atpcs} which
+use the ARM/Thumb Procedure Call Standard naming conventions.  (Eiuther
+with the normal register name sor the special register names).
+
+This option can also be used for ARM architectures to force the
+disassembler to interpret all instructions as THUMB instructions by
+using the switch @samp{--disassembler-options=force-thumb}.  This can be
+useful when attempting to disassemble thumb code produced by other
+compilers.
+
+@item -p
+@itemx --private-headers
+Print information that is specific to the object file format.  The exact
+information printed depends upon the object file format.  For some
+object file formats, no additional information is printed.
+
 @item -r
 @itemx --reloc
 @cindex relocation entries, in object file
@@ -1181,8 +1443,14 @@ Display source code intermixed with disassembly, if possible.  Implies
 
 @item --show-raw-insn
 When disassembling instructions, print the instruction in hex as well as
-in symbolic form.  Not all targets handle this correctly yet.
+in symbolic form.  This is the default except when
+@code{--prefix-addresses} is used.
 
+@item --no-show-raw-insn
+When disassembling instructions, do not print the instruction bytes.
+This is the default when @code{--prefix-addresses} is used.
+
+@item -G
 @item --stabs
 @cindex stab
 @cindex .stab
@@ -1233,7 +1501,7 @@ relocation entries.  Using @samp{-x} is equivalent to specifying all of
 @samp{-a -f -h -r -t}.
 
 @item -w
-@item --wide
+@itemx --wide
 @cindex wide output, printing
 Format some lines for output devices that have more than 80 columns.
 @end table
@@ -1266,6 +1534,7 @@ The @sc{gnu} @code{ranlib} program is another form of @sc{gnu} @code{ar}; runnin
 @table @code
 @item -v
 @itemx -V
+@itemx --version
 Show the version number of @code{ranlib}.
 @end table
 
@@ -1279,7 +1548,7 @@ Show the version number of @code{ranlib}.
 size [ -A | -B | --format=@var{compatibility} ]
      [ --help ]  [ -d | -o | -x | --radix=@var{number} ]
      [ --target=@var{bfdname} ]  [ -V | --version ]  
-     @var{objfile}@dots{}
+     [ @var{objfile}@dots{} ]
 @end smallexample
 
 The @sc{gnu} @code{size} utility lists the section sizes---and the total
@@ -1288,6 +1557,7 @@ argument list.  By default, one line of output is generated for each
 object file or each module in an archive.
 
 @var{objfile}@dots{} are the object files to be examined.
+If none are specified, the file @code{a.out} will be used.
 
 The command line options have the following meanings:
 
@@ -1308,7 +1578,7 @@ Berkeley's.
 Here is an example of the Berkeley (default) format of output from
 @code{size}: 
 @smallexample
-size --format=Berkeley ranlib size
+$ size --format=Berkeley ranlib size
 text    data    bss     dec     hex     filename
 294880  81920   11592   388392  5ed28   ranlib
 294880  81920   11888   388688  5ee50   size
@@ -1318,7 +1588,7 @@ text    data    bss     dec     hex     filename
 This is the same data, but displayed closer to System V conventions:
 
 @smallexample
-size --format=SysV ranlib size
+$ size --format=SysV ranlib size
 ranlib  :
 section         size         addr
 .text         294880         8192       
@@ -1402,8 +1672,8 @@ Print the name of the file before each string.
 @item --help
 Print a summary of the program usage on the standard output and exit.
 
-@itemx -@var{min-len}
-@item -n @var{min-len}
+@item -@var{min-len}
+@itemx -n @var{min-len}
 @itemx --bytes=@var{min-len}
 Print sequences of characters that are at least @var{min-len} characters
 long, instead of the default 4.
@@ -1438,7 +1708,7 @@ Print the program version number on the standard output and exit.
 @cindex symbols, discarding
 
 @smallexample
-strip [ -F @var{bfdname} | --target=@var{bfdname} | --target=@var{bfdname} ]
+strip [ -F @var{bfdname} | --target=@var{bfdname} ]
       [ -I @var{bfdname} | --input-target=@var{bfdname} ]
       [ -O @var{bfdname} | --output-target=@var{bfdname} ]
       [ -s | --strip-all ] [ -S | -g | --strip-debug ]
@@ -1446,7 +1716,7 @@ strip [ -F @var{bfdname} | --target=@var{bfdname} | --target=@var{bfdname} ]
       [ -N @var{symbolname} | --strip-symbol=@var{symbolname} ]
       [ -x | --discard-all ] [ -X | --discard-locals ]
       [ -R @var{sectionname} | --remove-section=@var{sectionname} ]
-      [ -o @var{file} ]
+      [ -o @var{file} ] [ -p | --preserve-dates ]
       [ -v | --verbose ]  [ -V | --version ]  [ --help ]
       @var{objfile}@dots{}
 @end smallexample
@@ -1513,6 +1783,10 @@ Put the stripped output in @var{file}, rather than replacing the
 existing file.  When this argument is used, only one @var{objfile}
 argument may be specified.
 
+@item -p
+@itemx --preserve-dates
+Preserve the access and modification dates of the file.
+
 @item -x
 @itemx --discard-all
 Remove non-global symbols.
@@ -1532,7 +1806,7 @@ Verbose output: list all object files modified.  In the case of
 archives, @samp{strip -v} lists all members of the archive.
 @end table
 
-@node c++filt
+@node c++filt, addr2line, strip, Top
 @chapter c++filt
 
 @kindex c++filt
@@ -1540,18 +1814,23 @@ archives, @samp{strip -v} lists all members of the archive.
 
 @smallexample
 c++filt [ -_ | --strip-underscores ]
+        [ -j | --java ]
 	[ -n | --no-strip-underscores ]
         [ -s @var{format} | --format=@var{format} ]
         [ --help ]  [ --version ]  [ @var{symbol}@dots{} ]
 @end smallexample
 
-The C++ language provides function overloading, which means that you can
-write many functions with the same name (providing each takes parameters
-of different types).  All C++ function names are encoded into a
-low-level assembly label (this process is known as
-@dfn{mangling}). The @code{c++filt} program does the inverse mapping: it
-decodes (@dfn{demangles}) low-level names into user-level names so that
-the linker can keep these overloaded functions from clashing.
+@kindex cxxfilt
+The C++ and Java languages provides function overloading, which means
+that you can write many functions with the same name (providing each
+takes parameters of different types).  All C++ and Java function names
+are encoded into a low-level assembly label (this process is known as
+@dfn{mangling}). The @code{c++filt}
+@footnote{MS-DOS does not allow @kbd{+} characters in file names, so on
+MS-DOS this program is named @code{cxxfilt}.}
+program does the inverse mapping: it decodes (@dfn{demangles}) low-level
+names into user-level names so that the linker can keep these overloaded
+functions from clashing.
 
 Every alphanumeric word (consisting of letters, digits, underscores,
 dollars, or periods) seen in the input is a potential label.  If the
@@ -1576,6 +1855,11 @@ of every name.  For example, the C name @code{foo} gets the low-level
 name @code{_foo}.  This option removes the initial underscore.  Whether
 @code{c++filt} removes the underscore by default is target dependent.
 
+@item -j
+@itemx --java
+Prints demangled names using Java syntax.  The default is to use C++
+syntax.
+
 @item -n
 @itemx --no-strip-underscores
 Do not remove the initial underscore.
@@ -1593,6 +1877,12 @@ the one used by the @sc{gnu} compiler (the default method)
 the one used by the Lucid compiler
 @item arm
 the one specified by the C++ Annotated Reference Manual
+@item hp
+the one used by the HP compiler
+@item edg
+the one used by the EDG compiler
+@item gnu-new-abi
+the one used by the @sc{gnu} compiler with the new ABI.
 @end table
 
 @item --help
@@ -1620,6 +1910,84 @@ c++filt @var{option} @var{symbol}
 @end example
 @end quotation
 
+@node addr2line
+@chapter addr2line
+
+@kindex addr2line
+@cindex address to file name and line number
+
+@smallexample
+addr2line [ -b @var{bfdname} | --target=@var{bfdname} ]
+          [ -C | --demangle[=@var{style} ]
+          [ -e @var{filename} | --exe=@var{filename} ]
+          [ -f | --functions ] [ -s | --basename ]
+          [ -H | --help ] [ -V | --version ]
+          [ addr addr ... ]
+@end smallexample
+
+@code{addr2line} translates program addresses into file names and line
+numbers.  Given an address and an executable, it uses the debugging
+information in the executable to figure out which file name and line
+number are associated with a given address.
+
+The executable to use is specified with the @code{-e} option.  The
+default is the file @file{a.out}.
+
+@code{addr2line} has two modes of operation.
+
+In the first, hexadecimal addresses are specified on the command line,
+and @code{addr2line} displays the file name and line number for each
+address.
+
+In the second, @code{addr2line} reads hexadecimal addresses from
+standard input, and prints the file name and line number for each
+address on standard output.  In this mode, @code{addr2line} may be used
+in a pipe to convert dynamically chosen addresses.
+
+The format of the output is @samp{FILENAME:LINENO}.  The file name and
+line number for each address is printed on a separate line.  If the
+@code{-f} option is used, then each @samp{FILENAME:LINENO} line is
+preceded by a @samp{FUNCTIONNAME} line which is the name of the function
+containing the address.
+
+If the file name or function name can not be determined,
+@code{addr2line} will print two question marks in their place.  If the
+line number can not be determined, @code{addr2line} will print 0.
+
+The long and short forms of options, shown here as alternatives, are
+equivalent.
+
+@table @code
+@item -b @var{bfdname}
+@itemx --target=@var{bfdname}
+@cindex object code format
+Specify that the object-code format for the object files is
+@var{bfdname}.
+
+@item -C
+@itemx --demangle[=@var{style}]
+@cindex demangling in objdump
+Decode (@dfn{demangle}) low-level symbol names into user-level names.
+Besides removing any initial underscore prepended by the system, this
+makes C++ function names readable.  Different compilers have different
+mangling styles. The optional demangling style argument can be used to 
+choose an appropriate demangling style for your compiler. @xref{c++filt}, 
+for more information on demangling.
+
+@item -e @var{filename}
+@itemx --exe=@var{filename}
+Specify the name of the executable for which addresses should be
+translated.  The default file is @file{a.out}.
+
+@item -f
+@itemx --functions
+Display function names as well as file and line number information.
+
+@item -s
+@itemx --basenames
+Display only the base of each file name.
+@end table
+
 @node nlmconv
 @chapter nlmconv
 
@@ -1693,7 +2061,7 @@ Displays (on standard error) the linker command line used by @code{nlmconv}.
 
 @item -l @var{linker}
 @itemx --linker=@var{linker}
-Use @var{linker} for any linking.  @var{linker} can be an abosolute or a
+Use @var{linker} for any linking.  @var{linker} can be an absolute or a
 relative pathname.
 
 @item -h
@@ -1705,6 +2073,520 @@ Prints a usage summary.
 Prints the version number for @code{nlmconv}.
 @end table
 
+@node windres
+@chapter windres
+
+@code{windres} may be used to manipulate Windows resources.
+
+@quotation
+@emph{Warning:} @code{windres} is not always built as part of the binary
+utilities, since it is only useful for Windows targets.
+@end quotation
+
+@smallexample
+windres [options] [input-file] [output-file]
+@end smallexample
+
+@code{windres} reads resources from an input file and copies them into
+an output file.  Either file may be in one of three formats:
+
+@table @code
+@item rc
+A text format read by the Resource Compiler.
+
+@item res
+A binary format generated by the Resource Compiler.
+
+@item coff
+A COFF object or executable.
+@end table
+
+The exact description of these different formats is available in
+documentation from Microsoft.
+
+When @code{windres} converts from the @code{rc} format to the @code{res}
+format, it is acting like the Windows Resource Compiler.  When
+@code{windres} converts from the @code{res} format to the @code{coff}
+format, it is acting like the Windows @code{CVTRES} program.
+
+When @code{windres} generates an @code{rc} file, the output is similar
+but not identical to the format expected for the input.  When an input
+@code{rc} file refers to an external filename, an output @code{rc} file
+will instead include the file contents.
+
+If the input or output format is not specified, @code{windres} will
+guess based on the file name, or, for the input file, the file contents.
+A file with an extension of @file{.rc} will be treated as an @code{rc}
+file, a file with an extension of @file{.res} will be treated as a
+@code{res} file, and a file with an extension of @file{.o} or
+@file{.exe} will be treated as a @code{coff} file.
+
+If no output file is specified, @code{windres} will print the resources
+in @code{rc} format to standard output.
+
+The normal use is for you to write an @code{rc} file, use @code{windres}
+to convert it to a COFF object file, and then link the COFF file into
+your application.  This will make the resources described in the
+@code{rc} file available to Windows.
+
+@table @code
+@item -i @var{filename}
+@itemx --input @var{filename}
+The name of the input file.  If this option is not used, then
+@code{windres} will use the first non-option argument as the input file
+name.  If there are no non-option arguments, then @code{windres} will
+read from standard input.  @code{windres} can not read a COFF file from
+standard input.
+
+@item -o @var{filename}
+@itemx --output @var{filename}
+The name of the output file.  If this option is not used, then
+@code{windres} will use the first non-option argument, after any used
+for the input file name, as the output file name.  If there is no
+non-option argument, then @code{windres} will write to standard output.
+@code{windres} can not write a COFF file to standard output.
+
+@item -I @var{format}
+@itemx --input-format @var{format}
+The input format to read.  @var{format} may be @samp{res}, @samp{rc}, or
+@samp{coff}.  If no input format is specified, @code{windres} will
+guess, as described above.
+
+@item -O @var{format}
+@itemx --output-format @var{format}
+The output format to generate.  @var{format} may be @samp{res},
+@samp{rc}, or @samp{coff}.  If no output format is specified,
+@code{windres} will guess, as described above.
+
+@item -F @var{target}
+@itemx --target @var{target}
+Specify the BFD format to use for a COFF file as input or output.  This
+is a BFD target name; you can use the @code{--help} option to see a list
+of supported targets.  Normally @code{windres} will use the default
+format, which is the first one listed by the @code{--help} option.
+@ref{Target Selection}.
+
+@item --preprocessor @var{program}
+When @code{windres} reads an @code{rc} file, it runs it through the C
+preprocessor first.  This option may be used to specify the preprocessor
+to use, including any leading arguments.  The default preprocessor
+argument is @code{gcc -E -xc-header -DRC_INVOKED}.
+
+@item --include-dir @var{directory}
+Specify an include directory to use when reading an @code{rc} file.
+@code{windres} will pass this to the preprocessor as an @code{-I}
+option.  @code{windres} will also search this directory when looking for
+files named in the @code{rc} file.
+
+@item -D @var{target}
+@itemx --define @var{sym}[=@var{val}]
+Specify a @code{-D} option to pass to the preprocessor when reading an
+@code{rc} file.
+
+@item -v
+Enable verbose mode.  This tells you what the preprocessor is if you
+didn't specify one.
+
+@item --language @var{val}
+Specify the default language to use when reading an @code{rc} file.
+@var{val} should be a hexadecimal language code.  The low eight bits are
+the language, and the high eight bits are the sublanguage.
+
+@item --use-temp-file
+Use a temporary file to instead of using popen to read the output of
+the preprocessor. Use this option if the popen implementation is buggy 
+on the host (eg., certain non-English language versions of Windows 95 and 
+Windows 98 are known to have buggy popen where the output will instead
+go the console).
+
+@item --no-use-temp-file
+Use popen, not a temporary file, to read the output of the preprocessor.
+This is the default behaviour.
+
+@item --help
+Prints a usage summary.
+
+@item --version
+Prints the version number for @code{windres}.
+
+@item --yydebug
+If @code{windres} is compiled with @code{YYDEBUG} defined as @code{1},
+this will turn on parser debugging.
+@end table
+
+
+@node dlltool
+@chapter Create files needed to build and use DLLs
+@cindex DLL
+@kindex dlltool
+
+@code{dlltool} may be used to create the files needed to build and use
+dynamic link libraries (DLLs).
+
+@quotation
+@emph{Warning:} @code{dlltool} is not always built as part of the binary
+utilities, since it is only useful for those targets which support DLLs.
+@end quotation
+
+@smallexample
+dlltool [-d|--input-def @var{def-file-name}]
+        [-b|--base-file @var{base-file-name}]
+        [-e|--output-exp @var{exports-file-name}]
+        [-z|--output-def @var{def-file-name}]
+        [-l|--output-lib @var{library-file-name}]        
+        [--export-all-symbols] [--no-export-all-symbols]
+        [--exclude-symbols @var{list}]
+        [--no-default-excludes]
+        [-S|--as @var{path-to-assembler}] [-f|--as-flags @var{options}]
+        [-D|--dllname @var{name}] [-m|--machine @var{machine}]
+        [-a|--add-indirect] [-U|--add-underscore] [-k|--kill-at]
+        [-A|--add-stdcall-alias]
+        [-x|--no-idata4] [-c|--no-idata5] [-i|--interwork]
+        [-n|--nodelete] [-v|--verbose] [-h|--help] [-V|--version]
+        [object-file @dots{}]
+@end smallexample
+
+@code{dlltool} reads its inputs, which can come from the @samp{-d} and
+@samp{-b} options as well as object files specified on the command
+line.  It then processes these inputs and if the @samp{-e} option has
+been specified it creates a exports file.  If the @samp{-l} option
+has been specified it creates a library file and if the @samp{-z} option
+has been specified it creates a def file.  Any or all of the -e, -l
+and -z options can be present in one invocation of dlltool.
+
+When creating a DLL, along with the source for the DLL, it is necessary
+to have three other files.  @code{dlltool} can help with the creation of
+these files.
+
+The first file is a @samp{.def} file which specifies which functions are
+exported from the DLL, which functions the DLL imports, and so on.  This
+is a text file and can be created by hand, or @code{dlltool} can be used
+to create it using the @samp{-z} option.  In this case @code{dlltool}
+will scan the object files specified on its command line looking for
+those functions which have been specially marked as being exported and
+put entries for them in the .def file it creates.
+
+In order to mark a function as being exported from a DLL, it needs to
+have an @samp{-export:<name_of_function>} entry in the @samp{.drectve}
+section of the object file.  This can be done in C by using the
+asm() operator:
+
+@smallexample
+  asm (".section .drectve");  
+  asm (".ascii \"-export:my_func\"");
+
+  int my_func (void) @{ @dots{} @}
+@end smallexample
+
+The second file needed for DLL creation is an exports file.  This file
+is linked with the object files that make up the body of the DLL and it
+handles the interface between the DLL and the outside world.  This is a
+binary file and it can be created by giving the @samp{-e} option to
+@code{dlltool} when it is creating or reading in a .def file. 
+
+The third file needed for DLL creation is the library file that programs
+will link with in order to access the functions in the DLL.  This file
+can be created by giving the @samp{-l} option to dlltool when it
+is creating or reading in a .def file.
+
+@code{dlltool} builds the library file by hand, but it builds the
+exports file by creating temporary files containing assembler statements
+and then assembling these.  The @samp{-S} command line option can be
+used to specify the path to the assembler that dlltool will use,
+and the @samp{-f} option can be used to pass specific flags to that
+assembler.  The @samp{-n} can be used to prevent dlltool from deleting
+these temporary assembler files when it is done, and if @samp{-n} is
+specified twice then this will prevent dlltool from deleting the
+temporary object files it used to build the library.
+
+Here is an example of creating a DLL from a source file @samp{dll.c} and
+also creating a program (from an object file called @samp{program.o})
+that uses that DLL:
+
+@smallexample
+  gcc -c dll.c
+  dlltool -e exports.o -l dll.lib dll.o
+  gcc dll.o exports.o -o dll.dll
+  gcc program.o dll.lib -o program
+@end smallexample
+
+The command line options have the following meanings:
+
+@table @code
+
+@item -d @var{filename}
+@itemx --input-def @var{filename}
+@cindex input .def file
+Specifies the name of a .def file to be read in and processed.
+
+@item -b @var{filename}
+@itemx --base-file @var{filename}
+@cindex base files
+Specifies the name of a base file to be read in and processed.  The
+contents of this file will be added to the relocation section in the
+exports file generated by dlltool.
+
+@item -e @var{filename}
+@itemx --output-exp @var{filename}
+Specifies the name of the export file to be created by dlltool.
+
+@item -z @var{filename}
+@itemx --output-def @var{filename}
+Specifies the name of the .def file to be created by dlltool.
+
+@item -l @var{filename}
+@itemx --output-lib @var{filename}
+Specifies the name of the library file to be created by dlltool.
+
+@item --export-all-symbols
+Treat all global and weak defined symbols found in the input object
+files as symbols to be exported.  There is a small list of symbols which
+are not exported by default; see the @code{--no-default-excludes}
+option.  You may add to the list of symbols to not export by using the
+@code{--exclude-symbols} option.
+
+@item --no-export-all-symbols
+Only export symbols explicitly listed in an input .def file or in
+@samp{.drectve} sections in the input object files.  This is the default
+behaviour.  The @samp{.drectve} sections are created by @samp{dllexport}
+attributes in the source code.
+
+@item --exclude-symbols @var{list}
+Do not export the symbols in @var{list}.  This is a list of symbol names
+separated by comma or colon characters.  The symbol names should not
+contain a leading underscore.  This is only meaningful when
+@code{--export-all-symbols} is used.
+
+@item --no-default-excludes
+When @code{--export-all-symbols} is used, it will by default avoid
+exporting certain special symbols.  The current list of symbols to avoid
+exporting is @samp{DllMain@@12}, @samp{DllEntryPoint@@0},
+@samp{impure_ptr}.  You may use the @code{--no-default-excludes} option
+to go ahead and export these special symbols.  This is only meaningful
+when @code{--export-all-symbols} is used.
+
+@item -S @var{path}
+@itemx --as @var{path}
+Specifies the path, including the filename, of the assembler to be used
+to create the exports file.
+
+@item -f @var{switches}
+@itemx --as-flags @var{switches}
+Specifies any specific command line switches to be passed to the
+assembler when building the exports file.  This option will work even if
+the @samp{-S} option is not used.  This option only takes one argument,
+and if it occurs more than once on the command line, then later
+occurrences will override earlier occurrences.  So if it is necessary to
+pass multiple switches to the assembler they should be enclosed in
+double quotes.
+
+@item -D @var{name}
+@itemx --dll-name @var{name}
+Specifies the name to be stored in the .def file as the name of the DLL
+when the @samp{-e} option is used.  If this option is not present, then
+the filename given to the @samp{-e} option will be used as the name of
+the DLL.
+
+@item -m @var{machine}
+@itemx -machine @var{machine}
+Specifies the type of machine for which the library file should be
+built.  @code{dlltool} has a built in default type, depending upon how
+it was created, but this option can be used to override that.  This is
+normally only useful when creating DLLs for an ARM processor, when the
+contents of the DLL are actually encode using THUMB instructions.
+
+@item -a
+@itemx --add-indirect
+Specifies that when @code{dlltool} is creating the exports file it
+should add a section which allows the exported functions to be
+referenced without using the import library.  Whatever the hell that
+means! 
+
+@item -U
+@itemx --add-underscore
+Specifies that when @code{dlltool} is creating the exports file it
+should prepend an underscore to the names of the exported functions. 
+
+@item -k
+@itemx --kill-at
+Specifies that when @code{dlltool} is creating the exports file it
+should not append the string @samp{@@ <number>}.  These numbers are
+called ordinal numbers and they represent another way of accessing the
+function in a DLL, other than by name.
+
+@item -A
+@itemx --add-stdcall-alias
+Specifies that when @code{dlltool} is creating the exports file it
+should add aliases for stdcall symbols without @samp{@@ <number>}
+in addition to the symbols with @samp{@@ <number>}.
+
+@item -x
+@itemx --no-idata4
+Specifies that when @code{dlltool} is creating the exports and library
+files it should omit the .idata4 section.  This is for compatibility
+with certain operating systems.
+
+@item -c
+@itemx --no-idata5
+Specifies that when @code{dlltool} is creating the exports and library
+files it should omit the .idata5 section.  This is for compatibility
+with certain operating systems.
+
+@item -i
+@itemx --interwork
+Specifies that @code{dlltool} should mark the objects in the library
+file and exports file that it produces as supporting interworking
+between ARM and THUMB code.
+
+@item -n
+@itemx --nodelete
+Makes @code{dlltool} preserve the temporary assembler files it used to
+create the exports file.  If this option is repeated then dlltool will
+also preserve the temporary object files it uses to create the library
+file. 
+
+@item -v
+@itemx --verbose
+Make dlltool describe what it is doing.
+
+@item -h
+@itemx --help
+Displays a list of command line options and then exits.
+
+@item -V
+@itemx --version
+Displays dlltool's version number and then exits.
+
+@end table
+
+@node readelf
+@chapter readelf
+
+@cindex ELF file information
+@kindex readelf
+
+@smallexample
+readelf [ -a | --all ] 
+        [ -h | --file-header]
+        [ -l | --program-headers | --segments]
+        [ -S | --section-headers | --sections]
+        [ -e | --headers]
+        [ -s | --syms | --symbols]
+        [ -n | --notes]
+        [ -r | --relocs]
+        [ -d | --dynamic]
+        [ -V | --version-info]
+        [ -D | --use-dynamic]
+        [ -x <number> | --hex-dump=<number>]
+        [ -w[liapr] | --debug-dump[=info,=line,=abbrev,=pubnames,=ranges]]
+        [      --histogram]
+        [ -v | --version]
+        [ -H | --help]
+        @var{elffile}@dots{}
+@end smallexample
+
+@code{readelf} displays information about one or more ELF format object
+files.  The options control what particular information to display.
+
+@var{elffile}@dots{} are the object files to be examined.  At the
+moment, @code{readelf} does not support examining archives, nor does it
+support examing 64 bit ELF files.
+
+The long and short forms of options, shown here as alternatives, are
+equivalent.  At least one option besides @samp{-v} or @samp{-H} must be
+given. 
+
+@table @code
+@item -a
+@itemx --all
+Equivalent to specifiying @samp{--file-header},
+@samp{--program-headers}, @samp{--sections}, @samp{--symbols},
+@samp{--relocs}, @samp{--dynamic}, @samp{--notes} and
+@samp{--version-info}. 
+
+@item -h
+@itemx --file-header
+@cindex ELF file header information
+Displays the information contained in the ELF header at the start of the
+file.
+
+@item -l
+@itemx --program-headers
+@itemx --segments
+@cindex ELF program header information
+@cindex ELF segment information
+Displays the information contained in the file's segment headers, if it
+has any.
+
+@item -S
+@itemx --sections
+@itemx --section-headers
+@cindex ELF section information
+Displays the information contained in the file's section headers, if it
+has any.
+
+@item -s
+@itemx --symbols
+@itemx --syms
+@cindex ELF symbol table information
+Displays the entries in symbol table section of the file, if it has one.
+
+@item -e
+@itemx --headers
+Display all the headers in the file.  Equivalent to @samp{-h -l -S}.
+
+@item -n
+@itemx --notes
+@cindex ELF core notes
+Displays the contents of the NOTE segment, if it exists.
+
+@item -r
+@itemx --relocs
+@cindex ELF reloc information
+Displays the contents of the file's relocation section, if it ha one.
+
+@item -d
+@itemx --dynamic
+@cindex ELF dynamic section information
+Displays the contents of the file's dynamic section, if it has one.
+
+@item -V
+@itemx --version-info
+@cindex ELF version sections informations
+Displays the contents of the version sections in the file, it they
+exist.
+
+@item -D
+@itemx --use-dynamic
+When displaying symbols, this option makes @code{readelf} use the
+symbol table in the file's dynamic section, rather than the one in the
+symbols section.
+
+@item -x <number>
+@itemx --hex-dump=<number>
+Displays the contents of the indicated section as a hexadecimal dump.
+
+@item -w[liapr]
+@itemx --debug-dump[=line,=info,=abbrev,=pubnames,=ranges]
+Displays the contents of the debug sections in the file, if any are
+present.  If one of the optional letters or words follows the switch
+then only data found in those specific sections will be dumped.
+
+@item --histogram
+Display a histogram of bucket list lengths when displaying the contents
+of the symbol tables.
+
+@item -v
+@itemx --version
+Display the version number of readelf.
+
+@item -H
+@itemx --help
+Display the command line options understood by @code{readelf}.
+
+@end table
+
+
 @node Selecting The Target System
 @chapter Selecting the target system
 
@@ -1753,6 +2635,16 @@ The command to list valid target values is @samp{objdump -i}
 Some sample values are: @samp{a.out-hp300bsd}, @samp{ecoff-littlemips},
 @samp{a.out-sunos-big}.
 
+You can also specify a target using a configuration triplet.  This is
+the same sort of name that is passed to @file{configure} to specify a
+target.  When you use a configuration triplet as an argument, it must be
+fully canonicalized.  You can see the canonical version of a triplet by
+running the shell script @file{config.sub} which is included with the
+sources.
+
+Some sample configuration triplets are: @samp{m68k-hp-bsd},
+@samp{mips-dec-ultrix}, @samp{sparc-sun-sunos}.
+
 @subheading @code{objdump} Target
 
 Ways to specify:
@@ -1949,6 +2841,578 @@ compiled-in @code{DEFAULT_EMULATION} from @file{Makefile},
 which comes from @code{EMUL} in @file{config/@var{target}.mt}
 @end enumerate
 
+@node Reporting Bugs
+@chapter Reporting Bugs
+@cindex bugs
+@cindex reporting bugs
+
+Your bug reports play an essential role in making the binary utilities
+reliable.
+
+Reporting a bug may help you by bringing a solution to your problem, or
+it may not.  But in any case the principal function of a bug report is
+to help the entire community by making the next version of the binary
+utilities work better.  Bug reports are your contribution to their
+maintenance.
+
+In order for a bug report to serve its purpose, you must include the
+information that enables us to fix the bug.
+
+@menu
+* Bug Criteria::                Have you found a bug?
+* Bug Reporting::               How to report bugs
+@end menu
+
+@node Bug Criteria
+@section Have you found a bug?
+@cindex bug criteria
+
+If you are not sure whether you have found a bug, here are some guidelines:
+
+@itemize @bullet
+@cindex fatal signal
+@cindex crash
+@item
+If a binary utility gets a fatal signal, for any input whatever, that is
+a bug.  Reliable utilities never crash.
+
+@cindex error on valid input
+@item
+If a binary utility produces an error message for valid input, that is a
+bug.
+
+@item
+If you are an experienced user of binary utilities, your suggestions for
+improvement are welcome in any case.
+@end itemize
+
+@node Bug Reporting
+@section How to report bugs
+@cindex bug reports
+@cindex bugs, reporting
+
+A number of companies and individuals offer support for @sc{gnu}
+products.  If you obtained the binary utilities from a support
+organization, we recommend you contact that organization first.
+
+You can find contact information for many support companies and
+individuals in the file @file{etc/SERVICE} in the @sc{gnu} Emacs
+distribution.
+
+In any event, we also recommend that you send bug reports for the binary
+utilities to @samp{bug-gnu-utils@@gnu.org}.
+
+The fundamental principle of reporting bugs usefully is this:
+@strong{report all the facts}.  If you are not sure whether to state a
+fact or leave it out, state it!
+
+Often people omit facts because they think they know what causes the
+problem and assume that some details do not matter.  Thus, you might
+assume that the name of a file you use in an example does not matter.
+Well, probably it does not, but one cannot be sure.  Perhaps the bug is
+a stray memory reference which happens to fetch from the location where
+that pathname is stored in memory; perhaps, if the pathname were
+different, the contents of that location would fool the utility into
+doing the right thing despite the bug.  Play it safe and give a
+specific, complete example.  That is the easiest thing for you to do,
+and the most helpful.
+
+Keep in mind that the purpose of a bug report is to enable us to fix the bug if
+it is new to us.  Therefore, always write your bug reports on the assumption
+that the bug has not been reported previously.
+
+Sometimes people give a few sketchy facts and ask, ``Does this ring a
+bell?''  Those bug reports are useless, and we urge everyone to
+@emph{refuse to respond to them} except to chide the sender to report
+bugs properly.
+
+To enable us to fix the bug, you should include all these things:
+
+@itemize @bullet
+@item
+The version of the utility.  Each utility announces it if you start it
+with the @samp{--version} argument.
+
+Without this, we will not know whether there is any point in looking for
+the bug in the current version of the binary utilities.
+
+@item
+Any patches you may have applied to the source, including any patches
+made to the @code{BFD} library.
+
+@item
+The type of machine you are using, and the operating system name and
+version number.
+
+@item
+What compiler (and its version) was used to compile the utilities---e.g.
+``@code{gcc-2.7}''.
+
+@item
+The command arguments you gave the utility to observe the bug.  To
+guarantee you will not omit something important, list them all.  A copy
+of the Makefile (or the output from make) is sufficient.
+
+If we were to try to guess the arguments, we would probably guess wrong
+and then we might not encounter the bug.
+
+@item
+A complete input file, or set of input files, that will reproduce the
+bug.  If the utility is reading an object file or files, then it is
+generally most helpful to send the actual object files, uuencoded if
+necessary to get them through the mail system.  Note that
+@samp{bug-gnu-utils@@gnu.org} is a mailing list, so you should avoid
+sending very large files to it.  Making the files available for
+anonymous FTP is OK.
+
+If the source files were produced exclusively using @sc{gnu} programs
+(e.g., @code{gcc}, @code{gas}, and/or the @sc{gnu} @code{ld}), then it
+may be OK to send the source files rather than the object files.  In
+this case, be sure to say exactly what version of @code{gcc}, or
+whatever, was used to produce the object files.  Also say how
+@code{gcc}, or whatever, was configured.
+
+@item
+A description of what behavior you observe that you believe is
+incorrect.  For example, ``It gets a fatal signal.''
+
+Of course, if the bug is that the utility gets a fatal signal, then we
+will certainly notice it.  But if the bug is incorrect output, we might
+not notice unless it is glaringly wrong.  You might as well not give us
+a chance to make a mistake.
+
+Even if the problem you experience is a fatal signal, you should still
+say so explicitly.  Suppose something strange is going on, such as your
+copy of the utility is out of synch, or you have encountered a bug in
+the C library on your system.  (This has happened!)  Your copy might
+crash and ours would not.  If you told us to expect a crash, then when
+ours fails to crash, we would know that the bug was not happening for
+us.  If you had not told us to expect a crash, then we would not be able
+to draw any conclusion from our observations.
+
+@item
+If you wish to suggest changes to the source, send us context diffs, as
+generated by @code{diff} with the @samp{-u}, @samp{-c}, or @samp{-p}
+option.  Always send diffs from the old file to the new file.  If you
+wish to discuss something in the @code{ld} source, refer to it by
+context, not by line number.
+
+The line numbers in our development sources will not match those in your
+sources.  Your line numbers would convey no useful information to us.
+@end itemize
+
+Here are some things that are not necessary:
+
+@itemize @bullet
+@item
+A description of the envelope of the bug.
+
+Often people who encounter a bug spend a lot of time investigating
+which changes to the input file will make the bug go away and which
+changes will not affect it.
+
+This is often time consuming and not very useful, because the way we
+will find the bug is by running a single example under the debugger
+with breakpoints, not by pure deduction from a series of examples.
+We recommend that you save your time for something else.
+
+Of course, if you can find a simpler example to report @emph{instead}
+of the original one, that is a convenience for us.  Errors in the
+output will be easier to spot, running under the debugger will take
+less time, and so on.
+
+However, simplification is not vital; if you do not want to do this,
+report the bug anyway and send us the entire test case you used.
+
+@item
+A patch for the bug.
+
+A patch for the bug does help us if it is a good one.  But do not omit
+the necessary information, such as the test case, on the assumption that
+a patch is all we need.  We might see problems with your patch and decide
+to fix the problem another way, or we might not understand it at all.
+
+Sometimes with programs as complicated as the binary utilities it is
+very hard to construct an example that will make the program follow a
+certain path through the code.  If you do not send us the example, we
+will not be able to construct one, so we will not be able to verify that
+the bug is fixed.
+
+And if we cannot understand what bug you are trying to fix, or why your
+patch should be an improvement, we will not install it.  A test case will
+help us to understand.
+
+@item
+A guess about what the bug is or what it depends on.
+
+Such guesses are usually wrong.  Even we cannot guess right about such
+things without first using the debugger to find the facts.
+@end itemize
+
+@node GNU Free Documentation License
+@chapter GNU Free Documentation License
+@cindex GNU Free Documentation License
+
+                GNU Free Documentation License
+                
+                   Version 1.1, March 2000
+
+ Copyright (C) 2000  Free Software Foundation, Inc.
+  59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+     
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+
+0. PREAMBLE
+
+The purpose of this License is to make a manual, textbook, or other
+written document "free" in the sense of freedom: to assure everyone
+the effective freedom to copy and redistribute it, with or without
+modifying it, either commercially or noncommercially.  Secondarily,
+this License preserves for the author and publisher a way to get
+credit for their work, while not being considered responsible for
+modifications made by others.
+
+This License is a kind of "copyleft", which means that derivative
+works of the document must themselves be free in the same sense.  It
+complements the GNU General Public License, which is a copyleft
+license designed for free software.
+
+We have designed this License in order to use it for manuals for free
+software, because free software needs free documentation: a free
+program should come with manuals providing the same freedoms that the
+software does.  But this License is not limited to software manuals;
+it can be used for any textual work, regardless of subject matter or
+whether it is published as a printed book.  We recommend this License
+principally for works whose purpose is instruction or reference.
+
+
+1. APPLICABILITY AND DEFINITIONS
+
+This License applies to any manual or other work that contains a
+notice placed by the copyright holder saying it can be distributed
+under the terms of this License.  The "Document", below, refers to any
+such manual or work.  Any member of the public is a licensee, and is
+addressed as "you".
+
+A "Modified Version" of the Document means any work containing the
+Document or a portion of it, either copied verbatim, or with
+modifications and/or translated into another language.
+
+A "Secondary Section" is a named appendix or a front-matter section of
+the Document that deals exclusively with the relationship of the
+publishers or authors of the Document to the Document's overall subject
+(or to related matters) and contains nothing that could fall directly
+within that overall subject.  (For example, if the Document is in part a
+textbook of mathematics, a Secondary Section may not explain any
+mathematics.)  The relationship could be a matter of historical
+connection with the subject or with related matters, or of legal,
+commercial, philosophical, ethical or political position regarding
+them.
+
+The "Invariant Sections" are certain Secondary Sections whose titles
+are designated, as being those of Invariant Sections, in the notice
+that says that the Document is released under this License.
+
+The "Cover Texts" are certain short passages of text that are listed,
+as Front-Cover Texts or Back-Cover Texts, in the notice that says that
+the Document is released under this License.
+
+A "Transparent" copy of the Document means a machine-readable copy,
+represented in a format whose specification is available to the
+general public, whose contents can be viewed and edited directly and
+straightforwardly with generic text editors or (for images composed of
+pixels) generic paint programs or (for drawings) some widely available
+drawing editor, and that is suitable for input to text formatters or
+for automatic translation to a variety of formats suitable for input
+to text formatters.  A copy made in an otherwise Transparent file
+format whose markup has been designed to thwart or discourage
+subsequent modification by readers is not Transparent.  A copy that is
+not "Transparent" is called "Opaque".
+
+Examples of suitable formats for Transparent copies include plain
+ASCII without markup, Texinfo input format, LaTeX input format, SGML
+or XML using a publicly available DTD, and standard-conforming simple
+HTML designed for human modification.  Opaque formats include
+PostScript, PDF, proprietary formats that can be read and edited only
+by proprietary word processors, SGML or XML for which the DTD and/or
+processing tools are not generally available, and the
+machine-generated HTML produced by some word processors for output
+purposes only.
+
+The "Title Page" means, for a printed book, the title page itself,
+plus such following pages as are needed to hold, legibly, the material
+this License requires to appear in the title page.  For works in
+formats which do not have any title page as such, "Title Page" means
+the text near the most prominent appearance of the work's title,
+preceding the beginning of the body of the text.
+
+
+2. VERBATIM COPYING
+
+You may copy and distribute the Document in any medium, either
+commercially or noncommercially, provided that this License, the
+copyright notices, and the license notice saying this License applies
+to the Document are reproduced in all copies, and that you add no other
+conditions whatsoever to those of this License.  You may not use
+technical measures to obstruct or control the reading or further
+copying of the copies you make or distribute.  However, you may accept
+compensation in exchange for copies.  If you distribute a large enough
+number of copies you must also follow the conditions in section 3.
+
+You may also lend copies, under the same conditions stated above, and
+you may publicly display copies.
+
+
+3. COPYING IN QUANTITY
+
+If you publish printed copies of the Document numbering more than 100,
+and the Document's license notice requires Cover Texts, you must enclose
+the copies in covers that carry, clearly and legibly, all these Cover
+Texts: Front-Cover Texts on the front cover, and Back-Cover Texts on
+the back cover.  Both covers must also clearly and legibly identify
+you as the publisher of these copies.  The front cover must present
+the full title with all words of the title equally prominent and
+visible.  You may add other material on the covers in addition.
+Copying with changes limited to the covers, as long as they preserve
+the title of the Document and satisfy these conditions, can be treated
+as verbatim copying in other respects.
+
+If the required texts for either cover are too voluminous to fit
+legibly, you should put the first ones listed (as many as fit
+reasonably) on the actual cover, and continue the rest onto adjacent
+pages.
+
+If you publish or distribute Opaque copies of the Document numbering
+more than 100, you must either include a machine-readable Transparent
+copy along with each Opaque copy, or state in or with each Opaque copy
+a publicly-accessible computer-network location containing a complete
+Transparent copy of the Document, free of added material, which the
+general network-using public has access to download anonymously at no
+charge using public-standard network protocols.  If you use the latter
+option, you must take reasonably prudent steps, when you begin
+distribution of Opaque copies in quantity, to ensure that this
+Transparent copy will remain thus accessible at the stated location
+until at least one year after the last time you distribute an Opaque
+copy (directly or through your agents or retailers) of that edition to
+the public.
+
+It is requested, but not required, that you contact the authors of the
+Document well before redistributing any large number of copies, to give
+them a chance to provide you with an updated version of the Document.
+
+
+4. MODIFICATIONS
+
+You may copy and distribute a Modified Version of the Document under
+the conditions of sections 2 and 3 above, provided that you release
+the Modified Version under precisely this License, with the Modified
+Version filling the role of the Document, thus licensing distribution
+and modification of the Modified Version to whoever possesses a copy
+of it.  In addition, you must do these things in the Modified Version:
+
+A. Use in the Title Page (and on the covers, if any) a title distinct
+   from that of the Document, and from those of previous versions
+   (which should, if there were any, be listed in the History section
+   of the Document).  You may use the same title as a previous version
+   if the original publisher of that version gives permission.
+B. List on the Title Page, as authors, one or more persons or entities
+   responsible for authorship of the modifications in the Modified
+   Version, together with at least five of the principal authors of the
+   Document (all of its principal authors, if it has less than five).
+C. State on the Title page the name of the publisher of the
+   Modified Version, as the publisher.
+D. Preserve all the copyright notices of the Document.
+E. Add an appropriate copyright notice for your modifications
+   adjacent to the other copyright notices.
+F. Include, immediately after the copyright notices, a license notice
+   giving the public permission to use the Modified Version under the
+   terms of this License, in the form shown in the Addendum below.
+G. Preserve in that license notice the full lists of Invariant Sections
+   and required Cover Texts given in the Document's license notice.
+H. Include an unaltered copy of this License.
+I. Preserve the section entitled "History", and its title, and add to
+   it an item stating at least the title, year, new authors, and
+   publisher of the Modified Version as given on the Title Page.  If
+   there is no section entitled "History" in the Document, create one
+   stating the title, year, authors, and publisher of the Document as
+   given on its Title Page, then add an item describing the Modified
+   Version as stated in the previous sentence.
+J. Preserve the network location, if any, given in the Document for
+   public access to a Transparent copy of the Document, and likewise
+   the network locations given in the Document for previous versions
+   it was based on.  These may be placed in the "History" section.
+   You may omit a network location for a work that was published at
+   least four years before the Document itself, or if the original
+   publisher of the version it refers to gives permission.
+K. In any section entitled "Acknowledgements" or "Dedications",
+   preserve the section's title, and preserve in the section all the
+   substance and tone of each of the contributor acknowledgements
+   and/or dedications given therein.
+L. Preserve all the Invariant Sections of the Document,
+   unaltered in their text and in their titles.  Section numbers
+   or the equivalent are not considered part of the section titles.
+M. Delete any section entitled "Endorsements".  Such a section
+   may not be included in the Modified Version.
+N. Do not retitle any existing section as "Endorsements"
+   or to conflict in title with any Invariant Section.
+
+If the Modified Version includes new front-matter sections or
+appendices that qualify as Secondary Sections and contain no material
+copied from the Document, you may at your option designate some or all
+of these sections as invariant.  To do this, add their titles to the
+list of Invariant Sections in the Modified Version's license notice.
+These titles must be distinct from any other section titles.
+
+You may add a section entitled "Endorsements", provided it contains
+nothing but endorsements of your Modified Version by various
+parties--for example, statements of peer review or that the text has
+been approved by an organization as the authoritative definition of a
+standard.
+
+You may add a passage of up to five words as a Front-Cover Text, and a
+passage of up to 25 words as a Back-Cover Text, to the end of the list
+of Cover Texts in the Modified Version.  Only one passage of
+Front-Cover Text and one of Back-Cover Text may be added by (or
+through arrangements made by) any one entity.  If the Document already
+includes a cover text for the same cover, previously added by you or
+by arrangement made by the same entity you are acting on behalf of,
+you may not add another; but you may replace the old one, on explicit
+permission from the previous publisher that added the old one.
+
+The author(s) and publisher(s) of the Document do not by this License
+give permission to use their names for publicity for or to assert or
+imply endorsement of any Modified Version.
+
+
+5. COMBINING DOCUMENTS
+
+You may combine the Document with other documents released under this
+License, under the terms defined in section 4 above for modified
+versions, provided that you include in the combination all of the
+Invariant Sections of all of the original documents, unmodified, and
+list them all as Invariant Sections of your combined work in its
+license notice.
+
+The combined work need only contain one copy of this License, and
+multiple identical Invariant Sections may be replaced with a single
+copy.  If there are multiple Invariant Sections with the same name but
+different contents, make the title of each such section unique by
+adding at the end of it, in parentheses, the name of the original
+author or publisher of that section if known, or else a unique number.
+Make the same adjustment to the section titles in the list of
+Invariant Sections in the license notice of the combined work.
+
+In the combination, you must combine any sections entitled "History"
+in the various original documents, forming one section entitled
+"History"; likewise combine any sections entitled "Acknowledgements",
+and any sections entitled "Dedications".  You must delete all sections
+entitled "Endorsements."
+
+
+6. COLLECTIONS OF DOCUMENTS
+
+You may make a collection consisting of the Document and other documents
+released under this License, and replace the individual copies of this
+License in the various documents with a single copy that is included in
+the collection, provided that you follow the rules of this License for
+verbatim copying of each of the documents in all other respects.
+
+You may extract a single document from such a collection, and distribute
+it individually under this License, provided you insert a copy of this
+License into the extracted document, and follow this License in all
+other respects regarding verbatim copying of that document.
+
+
+7. AGGREGATION WITH INDEPENDENT WORKS
+
+A compilation of the Document or its derivatives with other separate
+and independent documents or works, in or on a volume of a storage or
+distribution medium, does not as a whole count as a Modified Version
+of the Document, provided no compilation copyright is claimed for the
+compilation.  Such a compilation is called an "aggregate", and this
+License does not apply to the other self-contained works thus compiled
+with the Document, on account of their being thus compiled, if they
+are not themselves derivative works of the Document.
+
+If the Cover Text requirement of section 3 is applicable to these
+copies of the Document, then if the Document is less than one quarter
+of the entire aggregate, the Document's Cover Texts may be placed on
+covers that surround only the Document within the aggregate.
+Otherwise they must appear on covers around the whole aggregate.
+
+
+8. TRANSLATION
+
+Translation is considered a kind of modification, so you may
+distribute translations of the Document under the terms of section 4.
+Replacing Invariant Sections with translations requires special
+permission from their copyright holders, but you may include
+translations of some or all Invariant Sections in addition to the
+original versions of these Invariant Sections.  You may include a
+translation of this License provided that you also include the
+original English version of this License.  In case of a disagreement
+between the translation and the original English version of this
+License, the original English version will prevail.
+
+
+9. TERMINATION
+
+You may not copy, modify, sublicense, or distribute the Document except
+as expressly provided for under this License.  Any other attempt to
+copy, modify, sublicense or distribute the Document is void, and will
+automatically terminate your rights under this License.  However,
+parties who have received copies, or rights, from you under this
+License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+
+10. FUTURE REVISIONS OF THIS LICENSE
+
+The Free Software Foundation may publish new, revised versions
+of the GNU Free Documentation License from time to time.  Such new
+versions will be similar in spirit to the present version, but may
+differ in detail to address new problems or concerns.  See
+http://www.gnu.org/copyleft/.
+
+Each version of the License is given a distinguishing version number.
+If the Document specifies that a particular numbered version of this
+License "or any later version" applies to it, you have the option of
+following the terms and conditions either of that specified version or
+of any later version that has been published (not as a draft) by the
+Free Software Foundation.  If the Document does not specify a version
+number of this License, you may choose any version ever published (not
+as a draft) by the Free Software Foundation.
+
+
+ADDENDUM: How to use this License for your documents
+
+To use this License in a document you have written, include a copy of
+the License in the document and put the following copyright and
+license notices just after the title page:
+
+@smallexample
+    Copyright (c)  YEAR  YOUR NAME.
+    Permission is granted to copy, distribute and/or modify this document
+    under the terms of the GNU Free Documentation License, Version 1.1
+    or any later version published by the Free Software Foundation;
+    with the Invariant Sections being LIST THEIR TITLES, with the
+    Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST.
+    A copy of the license is included in the section entitled "GNU
+    Free Documentation License".
+@end smallexample
+
+If you have no Invariant Sections, write "with no Invariant Sections"
+instead of saying which ones are invariant.  If you have no
+Front-Cover Texts, write "no Front-Cover Texts" instead of
+"Front-Cover Texts being LIST"; likewise for Back-Cover Texts.
+
+If your document contains nontrivial examples of program code, we
+recommend releasing these examples in parallel under your choice of
+free software license, such as the GNU General Public License,
+to permit their use in free software.
+
 @node Index
 @unnumbered Index