X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=binutils%2Fconfigure;h=ccbef4de3cace64ceaec3baf4081406a6beeb31d;hb=8fc34799029ef55fd64a6cd72d592aee9e8ac074;hp=67be0f9744779f8c8e376d3d716a6d724ac9875b;hpb=12e0afe57bb7e79fb1f8f01ae703cde91e39d4ff;p=deliverable%2Fbinutils-gdb.git diff --git a/binutils/configure b/binutils/configure index 67be0f9744..ccbef4de3c 100755 --- a/binutils/configure +++ b/binutils/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.1 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -11,16 +11,28 @@ ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: +ac_help="$ac_help + --enable-shared[=PKGS] build shared libraries [default=yes]" +ac_help="$ac_help + --enable-static[=PKGS] build static libraries [default=yes]" +ac_help="$ac_help + --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" ac_help="$ac_help - --enable-shared build shared libraries [default=yes]" + --disable-libtool-lock avoid locking (might break parallel builds)" ac_help="$ac_help - --enable-static build static libraries [default=yes]" + --with-pic try to use only PIC/non-PIC objects [default=use both]" ac_help="$ac_help --enable-targets alternative target configurations" ac_help="$ac_help --enable-commonbfdlib build shared BFD/opcodes/libiberty library" +ac_help="$ac_help + --enable-build-warnings Enable build-time compiler warnings if gcc is used" +ac_help="$ac_help + --disable-nls do not use Native Language Support" +ac_help="$ac_help + --with-included-gettext use the GNU gettext library included here" ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" @@ -346,7 +358,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.1" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -516,9 +528,11 @@ ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross +ac_exeext= +ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then @@ -531,6 +545,68 @@ else ac_n= ac_c='\c' ac_t= fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:550: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:583: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes ac_aux_dir= @@ -580,7 +656,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:584: checking host system type" >&5 +echo "configure:660: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -601,7 +677,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:605: checking target system type" >&5 +echo "configure:681: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -619,7 +695,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:623: checking build system type" >&5 +echo "configure:699: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -642,6 +718,50 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- + echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6 +echo "configure:723: checking for strerror in -lcposix" >&5 +ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lcposix $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LIBS="$LIBS -lcposix" +else + echo "$ac_t""no" 1>&6 +fi + + + + +BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in` # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -654,12 +774,12 @@ test "$host_alias" != "$target_alias" && # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:658: checking for a BSD compatible install" >&5 +echo "configure:778: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -702,29 +822,12 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' - -PACKAGE=binutils - -VERSION=2.8.2 - -if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then - { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } -fi -cat >> confdefs.h <> confdefs.h <&6 -echo "configure:728: checking whether build environment is sane" >&5 +echo "configure:831: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -735,10 +838,21 @@ echo timestamp > conftestfile # directory). if ( set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` - if test "" = "X"; then + if test "$*" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftestfile` fi + if test "$*" != "X $srcdir/configure conftestfile" \ + && test "$*" != "X conftestfile $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { echo "configure: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" 1>&2; exit 1; } + fi + test "$2" = conftestfile ) then @@ -769,9 +883,54 @@ test "$program_suffix" != NONE && # sed with no file args requires a program. test "$program_transform_name" = "" && program_transform_name="s,x,x," +echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 +echo "configure:888: checking whether ${MAKE-make} sets \${MAKE}" >&5 +set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftestmake <<\EOF +all: + @echo 'ac_maketemp="${MAKE}"' +EOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` +if test -n "$ac_maketemp"; then + eval ac_cv_prog_make_${ac_make}_set=yes +else + eval ac_cv_prog_make_${ac_make}_set=no +fi +rm -f conftestmake +fi +if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then + echo "$ac_t""yes" 1>&6 + SET_MAKE= +else + echo "$ac_t""no" 1>&6 + SET_MAKE="MAKE=${MAKE-make}" +fi + + +PACKAGE=binutils + +VERSION=${BFD_VERSION} + +if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then + { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } +fi +cat >> confdefs.h <> confdefs.h <&6 -echo "configure:775: checking for working aclocal" >&5 +echo "configure:934: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -784,7 +943,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:788: checking for working autoconf" >&5 +echo "configure:947: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -797,7 +956,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:801: checking for working automake" >&5 +echo "configure:960: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -810,7 +969,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:814: checking for working autoheader" >&5 +echo "configure:973: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -823,7 +982,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:827: checking for working makeinfo" >&5 +echo "configure:986: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -835,75 +994,90 @@ else echo "$ac_t""missing" 1>&6 fi -echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:840: checking whether ${MAKE-make} sets \${MAKE}" >&5 -set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftestmake <<\EOF -all: - @echo 'ac_maketemp="${MAKE}"' -EOF -# GNU make sometimes prints "make[1]: Entering...", which would confuse us. -eval `${MAKE-make} -f conftestmake 2>/dev/null | grep temp=` -if test -n "$ac_maketemp"; then - eval ac_cv_prog_make_${ac_make}_set=yes + + +# Check whether --enable-shared or --disable-shared was given. +if test "${enable_shared+set}" = set; then + enableval="$enable_shared" + p=${PACKAGE-default} +case $enableval in +yes) enable_shared=yes ;; +no) enable_shared=no ;; +*) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac else - eval ac_cv_prog_make_${ac_make}_set=no + enable_shared=yes fi -rm -f conftestmake -fi -if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then - echo "$ac_t""yes" 1>&6 - SET_MAKE= + +# Check whether --enable-static or --disable-static was given. +if test "${enable_static+set}" = set; then + enableval="$enable_static" + p=${PACKAGE-default} +case $enableval in +yes) enable_static=yes ;; +no) enable_static=no ;; +*) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$ac_save_ifs" + ;; +esac else - echo "$ac_t""no" 1>&6 - SET_MAKE="MAKE=${MAKE-make}" + enable_static=yes fi - -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:870: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break +# Check whether --enable-fast-install or --disable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval="$enable_fast_install" + p=${PACKAGE-default} +case $enableval in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 + ;; +esac else - echo "$ac_t""no" 1>&6 + enable_fast_install=yes fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:899: checking for $ac_word" >&5 +echo "configure:1072: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -924,16 +1098,17 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:928: checking for $ac_word" >&5 +echo "configure:1102: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -968,25 +1143,61 @@ else echo "$ac_t""no" 1>&6 fi + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1153: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:976: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1185: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext < conftest.$ac_ext << EOF + +#line 1196 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:990: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1201: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1000,18 +1211,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1010: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1227: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1015: checking whether we are using GNU C" >&5 +echo "configure:1232: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1020,7 +1237,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1024: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1241: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1031,11 +1248,15 @@ echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1039: checking whether ${CC-cc} accepts -g" >&5 +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1260: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1050,18 +1271,22 @@ rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then CFLAGS="-g -O2" else - CFLAGS="-O2" + CFLAGS="-g" fi else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" -fi - + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + # Check whether --with-gnu-ld or --without-gnu-ld was given. if test "${with_gnu_ld+set}" = set; then withval="$with_gnu_ld" @@ -1070,18 +1295,29 @@ else with_gnu_ld=no fi - ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then +if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:1079: checking for ld used by GCC" >&5 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. - /*) - test -z "$LD" && LD="$ac_prog" - ;; +echo "configure:1303: checking for ld used by GCC" >&5 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld @@ -1093,99 +1329,112 @@ echo "configure:1079: checking for ld used by GCC" >&5 esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:1097: checking for GNU ld" >&5 +echo "configure:1333: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:1100: checking for non-GNU ld" >&5 +echo "configure:1336: checking for non-GNU ld" >&5 fi -if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then +if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog"; then - ac_cv_path_LD="$ac_dir/$ac_prog" + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else - test "$with_gnu_ld" != yes && break + test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else - ac_cv_path_LD="$LD" # Let the user override the test with a path. + lt_cv_path_LD="$LD" # Let the user override the test with a path. fi fi -LD="$ac_cv_path_LD" +LD="$lt_cv_path_LD" if test -n "$LD"; then echo "$ac_t""$LD" 1>&6 else echo "$ac_t""no" 1>&6 fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } - echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:1136: checking if the linker ($LD) is GNU ld" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then +echo "configure:1371: checking if the linker ($LD) is GNU ld" >&5 +if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes + lt_cv_prog_gnu_ld=yes else - ac_cv_prog_gnu_ld=no + lt_cv_prog_gnu_ld=no fi fi -echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 +echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6 +with_gnu_ld=$lt_cv_prog_gnu_ld + + +echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 +echo "configure:1388: checking for $LD option to reload object files" >&5 +if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_ld_reload_flag='-r' +fi +echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 +reload_flag=$lt_cv_ld_reload_flag +test -n "$reload_flag" && reload_flag=" $reload_flag" echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:1152: checking for BSD-compatible nm" >&5 -if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then +echo "configure:1400: checking for BSD-compatible nm" >&5 +if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - case "$NM" in -/*) - ac_cv_path_NM="$NM" # Let the user override the test with a path. - ;; -*) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do - test -z "$ac_dir" && dir=. - if test -f $ac_dir/nm; then + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1!d' prevents false positives on HP-UX, which says: + # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1!d'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + lt_cv_path_NM="$tmp_nm -B" + break + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" + break else - ac_cv_path_NM="$ac_dir/nm" + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags fi - break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm - ;; -esac + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi fi -NM="$ac_cv_path_NM" +NM="$lt_cv_path_NM" echo "$ac_t""$NM" 1>&6 - echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1189: checking whether ln -s works" >&5 +echo "configure:1438: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1205,539 +1454,2908 @@ else echo "$ac_t""no" 1>&6 fi +echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 +echo "configure:1459: checking how to recognise dependant libraries" >&5 +if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [regex]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; +cygwin* | mingw* |pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; +darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.012) + lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; +freebsd* ) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; +hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' +irix5* | irix6*) + case $host_os in + irix5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; +# This must be Linux ELF. +linux-gnu*) + case $host_cpu in + alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; -# Check whether --enable-shared or --disable-shared was given. -if test "${enable_shared+set}" = set; then - enableval="$enable_shared" - p=${PACKAGE-bogus-package-name} - case "$enableval" in - yes) libtool_enable_shared=yes ;; - no) libtool_enable_shared=no ;; - # The value of $p (aka $PACKAGE) is assumed to come from AM_INIT_AUTOMAKE. - # If it didn't, it'll be `bogus-package-name', thus making this condition - # not be used. - *$p*) libtool_enable_shared=yes ;; - *) libtool_enable_shared=no ;; +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' + fi + ;; + +newsos6) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv5uw[78]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + esac + ;; esac + fi -test -n "$libtool_enable_shared" && enable_shared="$libtool_enable_shared" -libtool_shared= -test "$enable_shared" = no && libtool_shared=" --disable-shared" +echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method -# Check whether --enable-static or --disable-static was given. -if test "${enable_static+set}" = set; then - enableval="$enable_static" - if test "$enableval" = no; then - libtool_enable_static=no +echo $ac_n "checking for object suffix""... $ac_c" 1>&6 +echo "configure:1623: checking for object suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 else - libtool_enable_static=yes + rm -f conftest* +echo 'int i = 1;' > conftest.$ac_ext +if { (eval echo configure:1629: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + for ac_file in conftest.*; do + case $ac_file in + *.c) ;; + *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; + esac + done +else + { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } fi +rm -f conftest* fi -test -n "$libtool_enable_static" && enable_static="$libtool_enable_static" -libtool_static= -test "$enable_static" = no && libtool_static=" --disable-static" +echo "$ac_t""$ac_cv_objext" 1>&6 +OBJEXT=$ac_cv_objext +ac_objext=$ac_cv_objext -libtool_flags="$libtool_shared$libtool_static" -test "$silent" = yes && libtool_flags="$libtool_flags --silent" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case "$host" in -*-*-irix6*) - ac_save_CFLAGS="$CFLAGS" - flag_passed=no - for f in -32 -64 -n32 ABI -cckr -mips1 -mips2 -mips3 -mips4; do - case "$f" in - ABI) - test -n "$SGI_ABI" && flag_passed=yes - if test "$flag_passed" = no && test "$ac_cv_prog_gcc" = yes; then - # Choose the ABI flag according to GCC's specs. - if $CC -dumpspecs 2>&1 | sed '/^\*link:$/,/^$/!d' | egrep -e '[ ]-32' >/dev/null; then - LD="${LD-ld} -32" - else - LD="${LD-ld} -n32" - fi - fi - ;; - *) - if echo " $CC $CFLAGS " | egrep -e "[ ]$f[ ]" > /dev/null; then - flag_passed=yes - LD="${LD-ld} $f" - fi - ;; - esac - done - CFLAGS="$ac_save_CFLAGS" - ;; +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:1649: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:1659: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +fi +fi -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - CFLAGS="$CFLAGS -belf" - ;; -esac +EXEEXT="" +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ -|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; } +if test $host != $build; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! -# Check whether --enable-targets or --disable-targets was given. -if test "${enable_targets+set}" = set; then - enableval="$enable_targets" - case "${enableval}" in - yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; } - ;; - no) enable_targets= ;; - *) enable_targets=$enableval ;; -esac -fi -# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given. -if test "${enable_commonbfdlib+set}" = set; then - enableval="$enable_commonbfdlib" - case "${enableval}" in - yes) commonbfdlib=true ;; - no) commonbfdlib=false ;; - *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;; +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 +echo "configure:1692: checking for ${ac_tool_prefix}file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; esac fi +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + echo $ac_n "checking for file""... $ac_c" 1>&6 +echo "configure:1754: checking for file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac +fi -if test -z "$target" ; then - { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; } +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 +else + echo "$ac_t""no" 1>&6 fi -if test -z "$host" ; then - { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; } + + else + MAGIC_CMD=: + fi fi -# Extract the first word of "gcc", so it can be a program name with args. -set dummy gcc; ac_word=$2 + fi + ;; +esac + +# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1337: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then +echo "configure:1825: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_CC="gcc" + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" break fi done IFS="$ac_save_ifs" fi fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi -if test -z "$CC"; then - # Extract the first word of "cc", so it can be a program name with args. -set dummy cc; ac_word=$2 + +if test -z "$ac_cv_prog_RANLIB"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1366: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then +echo "configure:1857: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$CC"; then - ac_cv_prog_CC="$CC" # Let the user override the test. + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - ac_prog_rejected=no - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then - ac_prog_rejected=yes - continue - fi - ac_cv_prog_CC="cc" + ac_cv_prog_RANLIB="ranlib" break fi done IFS="$ac_save_ifs" -if test $ac_prog_rejected = yes; then - # We found a bogon in the path, so make sure we never use it. - set dummy $ac_cv_prog_CC - shift - if test $# -gt 0; then - # We chose a different compiler from the bogus one. - # However, it has the same basename, so the bogon will be chosen - # first if we set CC to just the basename; use the full file name. - shift - set dummy "$ac_dir/$ac_word" "$@" - shift - ac_cv_prog_CC="$@" - fi -fi + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi -CC="$ac_cv_prog_CC" -if test -n "$CC"; then - echo "$ac_t""$CC" 1>&6 +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi - test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +else + RANLIB=":" +fi fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1414: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 - -ac_ext=c +# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1892: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + +if test -z "$ac_cv_prog_STRIP"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1924: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="strip" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" +fi +fi +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +else + STRIP=":" +fi +fi + + +# Check for any special flags to pass to ltconfig. +libtool_flags="--cache-file=$cache_file" +test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" +test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" +test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" +test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" +test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" + + +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" + : +fi + +test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" +test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" + +# Check whether --with-pic or --without-pic was given. +if test "${with_pic+set}" = set; then + withval="$with_pic" + pic_mode="$withval" +else + pic_mode=default +fi + +test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" +test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 1991 "configure"' > conftest.$ac_ext + if { (eval echo configure:1992: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 +echo "configure:2013: checking whether the C compiler needs -belf" >&5 +if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + + ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext < conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then - ac_cv_prog_cc_works=yes - # If we can't run a trivial program, we are probably using a cross compiler. - if (./conftest; exit) 2>/dev/null; then - ac_cv_prog_cc_cross=no - else - ac_cv_prog_cc_cross=yes - fi +if { (eval echo configure:2033: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + lt_cv_cc_needs_belf=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no + rm -rf conftest* + lt_cv_cc_needs_belf=no fi -rm -fr conftest* +rm -f conftest* + ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1448: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1453: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&6 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; + + +esac + + +# Save cache, so that ltconfig can load it +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1462: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : else - ac_cv_prog_gcc=no + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi fi +rm -f confcache + + +# Actually configure libtool. ac_aux_dir is where install-sh is found. +AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ +LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ +AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ +objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ +deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ +$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ +|| { echo "configure: error: libtool configure failed" 1>&2; exit 1; } + +# Reload cache, that may have been modified by ltconfig +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file fi -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 -if test $ac_cv_prog_gcc = yes; then - GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1477: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +# Redirect the config.log output again, so that the ltconfig log is not +# clobbered by the next message. +exec 5>>./config.log + + + + + + + +# Check whether --enable-targets or --disable-targets was given. +if test "${enable_targets+set}" = set; then + enableval="$enable_targets" + case "${enableval}" in + yes | "") { echo "configure: error: enable-targets option must specify target names or 'all'" 1>&2; exit 1; } + ;; + no) enable_targets= ;; + *) enable_targets=$enableval ;; +esac +fi +# Check whether --enable-commonbfdlib or --disable-commonbfdlib was given. +if test "${enable_commonbfdlib+set}" = set; then + enableval="$enable_commonbfdlib" + case "${enableval}" in + yes) commonbfdlib=true ;; + no) commonbfdlib=false ;; + *) { echo "configure: error: bad value ${enableval} for BFD commonbfdlib option" 1>&2; exit 1; } ;; +esac +fi + +build_warnings="-W -Wall -Wstrict-prototypes -Wmissing-prototypes" +# Check whether --enable-build-warnings or --disable-build-warnings was given. +if test "${enable_build_warnings+set}" = set; then + enableval="$enable_build_warnings" + case "${enableval}" in + yes) ;; + no) build_warnings="-w";; + ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${build_warnings} ${t}";; + *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${t} ${build_warnings}";; + *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; +esac +if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then + echo "Setting warning flags = $build_warnings" 6>&1 +fi +fi +WARN_CFLAGS="" +if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then + WARN_CFLAGS="${build_warnings}" +fi + + + + + + +if test -z "$target" ; then + { echo "configure: error: Unrecognized target system type; please check config.sub." 1>&2; exit 1; } +fi +if test -z "$host" ; then + { echo "configure: error: Unrecognized host system type; please check config.sub." 1>&2; exit 1; } +fi + +# Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2206: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. else - ac_cv_prog_cc_g=no + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="gcc" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2236: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_prog_rejected=no + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + break + fi + done + IFS="$ac_save_ifs" +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# -gt 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + set dummy "$ac_dir/$ac_word" "$@" + shift + ac_cv_prog_CC="$@" + fi +fi +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2287: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi + test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } +fi + +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 +echo "configure:2319: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 + +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +cat > conftest.$ac_ext << EOF + +#line 2330 "configure" +#include "confdefs.h" + +main(){return(0);} +EOF +if { (eval echo configure:2335: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + ac_cv_prog_cc_works=yes + # If we can't run a trivial program, we are probably using a cross compiler. + if (./conftest; exit) 2>/dev/null; then + ac_cv_prog_cc_cross=no + else + ac_cv_prog_cc_cross=yes + fi +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:2361: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:2366: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:2394: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + + +for ac_prog in 'bison -y' byacc +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2431: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$YACC"; then + ac_cv_prog_YACC="$YACC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_YACC="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +YACC="$ac_cv_prog_YACC" +if test -n "$YACC"; then + echo "$ac_t""$YACC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$YACC" && break +done +test -n "$YACC" || YACC="yacc" + +echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 +echo "configure:2462: checking how to run the C preprocessor" >&5 +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then +if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # This must be in double quotes, not single quotes, because CPP may get + # substituted into the Makefile and "${CC-cc}" will confuse make. + CPP="${CC-cc} -E" + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2483: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -E -traditional-cpp" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2500: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2517: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP=/lib/cpp +fi +rm -f conftest* +fi +rm -f conftest* +fi +rm -f conftest* + ac_cv_prog_CPP="$CPP" +fi + CPP="$ac_cv_prog_CPP" +else + ac_cv_prog_CPP="$CPP" +fi +echo "$ac_t""$CPP" 1>&6 + +missing_dir=`cd $ac_aux_dir && pwd` +for ac_prog in flex lex +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2547: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$LEX"; then + ac_cv_prog_LEX="$LEX" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_LEX="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +LEX="$ac_cv_prog_LEX" +if test -n "$LEX"; then + echo "$ac_t""$LEX" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$LEX" && break +done +test -n "$LEX" || LEX="$missing_dir/missing flex" + +# Extract the first word of "flex", so it can be a program name with args. +set dummy flex; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2580: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$LEX"; then + ac_cv_prog_LEX="$LEX" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_LEX="flex" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex" +fi +fi +LEX="$ac_cv_prog_LEX" +if test -n "$LEX"; then + echo "$ac_t""$LEX" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$LEXLIB" +then + case "$LEX" in + flex*) ac_lib=fl ;; + *) ac_lib=l ;; + esac + echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 +echo "configure:2614: checking for yywrap in -l$ac_lib" >&5 +ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-l$ac_lib $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LEXLIB="-l$ac_lib" +else + echo "$ac_t""no" 1>&6 +fi + +fi + +echo $ac_n "checking lex output file root""... $ac_c" 1>&6 +echo "configure:2656: checking lex output file root" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # The minimal lex program is just a single line: %%. But some broken lexes +# (Solaris, I think it was) want two %% lines, so accommodate them. +echo '%% +%%' | $LEX +if test -f lex.yy.c; then + ac_cv_prog_lex_root=lex.yy +elif test -f lexyy.c; then + ac_cv_prog_lex_root=lexyy +else + { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; } +fi +fi + +echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 +LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root + +echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 +echo "configure:2677: checking whether yytext is a pointer" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + # POSIX says lex can declare yytext either as a pointer or an array; the +# default is implementation-dependent. Figure out which it is, since +# not all implementations provide the %pointer and %array declarations. +ac_cv_prog_lex_yytext_pointer=no +echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c +ac_save_LIBS="$LIBS" +LIBS="$LIBS $LEXLIB" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_cv_prog_lex_yytext_pointer=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +LIBS="$ac_save_LIBS" +rm -f "${LEX_OUTPUT_ROOT}.c" + +fi + +echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6 +if test $ac_cv_prog_lex_yytext_pointer = yes; then + cat >> confdefs.h <<\EOF +#define YYTEXT_POINTER 1 +EOF + +fi + + +ALL_LINGUAS= +# Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2722: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 +echo "configure:2750: checking for ANSI C header files" >&5 +if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#include +#include +#include +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2763: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + ac_cv_header_stdc=yes +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "memchr" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. +cat > conftest.$ac_ext < +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "free" >/dev/null 2>&1; then + : +else + rm -rf conftest* + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. +if test "$cross_compiling" = yes; then + : +else + cat > conftest.$ac_ext < +#define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +#define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int main () { int i; for (i = 0; i < 256; i++) +if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); +exit (0); } + +EOF +if { (eval echo configure:2830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + : +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_header_stdc=no +fi +rm -fr conftest* +fi + +fi +fi + +echo "$ac_t""$ac_cv_header_stdc" 1>&6 +if test $ac_cv_header_stdc = yes; then + cat >> confdefs.h <<\EOF +#define STDC_HEADERS 1 +EOF + +fi + +echo $ac_n "checking for working const""... $ac_c" 1>&6 +echo "configure:2854: checking for working const" >&5 +if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <j = 5; +} +{ /* ULTRIX-32 V3.1 (Rev 9) vcc rejects this */ + const int foo = 10; +} + +; return 0; } +EOF +if { (eval echo configure:2908: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_const=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_c_const=no +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_c_const" 1>&6 +if test $ac_cv_c_const = no; then + cat >> confdefs.h <<\EOF +#define const +EOF + +fi + +echo $ac_n "checking for inline""... $ac_c" 1>&6 +echo "configure:2929: checking for inline" >&5 +if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_cv_c_inline=no +for ac_kw in inline __inline__ __inline; do + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_c_inline=$ac_kw; break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done + +fi + +echo "$ac_t""$ac_cv_c_inline" 1>&6 +case "$ac_cv_c_inline" in + inline | yes) ;; + no) cat >> confdefs.h <<\EOF +#define inline +EOF + ;; + *) cat >> confdefs.h <&6 +echo "configure:2969: checking for off_t" >&5 +if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#if STDC_HEADERS +#include +#include +#endif +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_type_off_t=yes +else + rm -rf conftest* + ac_cv_type_off_t=no +fi +rm -f conftest* + +fi +echo "$ac_t""$ac_cv_type_off_t" 1>&6 +if test $ac_cv_type_off_t = no; then + cat >> confdefs.h <<\EOF +#define off_t long +EOF + +fi + +echo $ac_n "checking for size_t""... $ac_c" 1>&6 +echo "configure:3002: checking for size_t" >&5 +if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#if STDC_HEADERS +#include +#include +#endif +EOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_type_size_t=yes +else + rm -rf conftest* + ac_cv_type_size_t=no +fi +rm -f conftest* + +fi +echo "$ac_t""$ac_cv_type_size_t" 1>&6 +if test $ac_cv_type_size_t = no; then + cat >> confdefs.h <<\EOF +#define size_t unsigned +EOF + +fi + +# The Ultrix 4.2 mips builtin alloca declared by alloca.h only works +# for constant arguments. Useless! +echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 +echo "configure:3037: checking for working alloca.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int main() { +char *p = alloca(2 * sizeof(int)); +; return 0; } +EOF +if { (eval echo configure:3049: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_cv_header_alloca_h=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_header_alloca_h=no +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_header_alloca_h" 1>&6 +if test $ac_cv_header_alloca_h = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_ALLOCA_H 1 +EOF + +fi + +echo $ac_n "checking for alloca""... $ac_c" 1>&6 +echo "configure:3070: checking for alloca" >&5 +if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +# define alloca _alloca +# else +# if HAVE_ALLOCA_H +# include +# else +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ +char *alloca (); +# endif +# endif +# endif +# endif +#endif + +int main() { +char *p = (char *) alloca(1); +; return 0; } +EOF +if { (eval echo configure:3103: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_cv_func_alloca_works=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_func_alloca_works=no +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_func_alloca_works" 1>&6 +if test $ac_cv_func_alloca_works = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_ALLOCA 1 +EOF + +fi + +if test $ac_cv_func_alloca_works = no; then + # The SVR3 libPW and SVR4 libucb both contain incompatible functions + # that cause trouble. Some versions do not even contain alloca or + # contain a buggy version. If you still want to use their alloca, + # use ar to extract alloca.o from them instead of compiling alloca.c. + ALLOCA=alloca.${ac_objext} + cat >> confdefs.h <<\EOF +#define C_ALLOCA 1 +EOF + + +echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 +echo "configure:3135: checking whether alloca needs Cray hooks" >&5 +if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5 | + egrep "webecray" >/dev/null 2>&1; then + rm -rf conftest* + ac_cv_os_cray=yes +else + rm -rf conftest* + ac_cv_os_cray=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_os_cray" 1>&6 +if test $ac_cv_os_cray = yes; then +for ac_func in _getb67 GETB67 getb67; do + echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:3165: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:3193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + cat >> confdefs.h <&6 +fi + +done +fi + +echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 +echo "configure:3220: checking stack direction for C alloca" >&5 +if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_c_stack_direction=0 +else + cat > conftest.$ac_ext < addr) ? 1 : -1; +} +main () +{ + exit (find_stack_direction() < 0); +} +EOF +if { (eval echo configure:3247: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + ac_cv_c_stack_direction=1 +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_c_stack_direction=-1 +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$ac_cv_c_stack_direction" 1>&6 +cat >> confdefs.h <&6 +echo "configure:3272: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3282: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + +for ac_func in getpagesize +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:3311: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:3339: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + +echo $ac_n "checking for working mmap""... $ac_c" 1>&6 +echo "configure:3364: checking for working mmap" >&5 +if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$cross_compiling" = yes; then + ac_cv_func_mmap_fixed_mapped=no +else + cat > conftest.$ac_ext < +#include +#include + +/* This mess was copied from the GNU getpagesize.h. */ +#ifndef HAVE_GETPAGESIZE +# ifdef HAVE_UNISTD_H +# include +# endif + +/* Assume that all systems that can run configure have sys/param.h. */ +# ifndef HAVE_SYS_PARAM_H +# define HAVE_SYS_PARAM_H 1 +# endif + +# ifdef _SC_PAGESIZE +# define getpagesize() sysconf(_SC_PAGESIZE) +# else /* no _SC_PAGESIZE */ +# ifdef HAVE_SYS_PARAM_H +# include +# ifdef EXEC_PAGESIZE +# define getpagesize() EXEC_PAGESIZE +# else /* no EXEC_PAGESIZE */ +# ifdef NBPG +# define getpagesize() NBPG * CLSIZE +# ifndef CLSIZE +# define CLSIZE 1 +# endif /* no CLSIZE */ +# else /* no NBPG */ +# ifdef NBPC +# define getpagesize() NBPC +# else /* no NBPC */ +# ifdef PAGESIZE +# define getpagesize() PAGESIZE +# endif /* PAGESIZE */ +# endif /* no NBPC */ +# endif /* no NBPG */ +# endif /* no EXEC_PAGESIZE */ +# else /* no HAVE_SYS_PARAM_H */ +# define getpagesize() 8192 /* punt totally */ +# endif /* no HAVE_SYS_PARAM_H */ +# endif /* no _SC_PAGESIZE */ + +#endif /* no HAVE_GETPAGESIZE */ + +#ifdef __cplusplus +extern "C" { void *malloc(unsigned); } +#else +char *malloc(); +#endif + +int +main() +{ + char *data, *data2, *data3; + int i, pagesize; + int fd; + + pagesize = getpagesize(); + + /* + * First, make a file with some known garbage in it. + */ + data = malloc(pagesize); + if (!data) + exit(1); + for (i = 0; i < pagesize; ++i) + *(data + i) = rand(); + umask(0); + fd = creat("conftestmmap", 0600); + if (fd < 0) + exit(1); + if (write(fd, data, pagesize) != pagesize) + exit(1); + close(fd); + + /* + * Next, try to mmap the file at a fixed address which + * already has something else allocated at it. If we can, + * also make sure that we see the same garbage. + */ + fd = open("conftestmmap", O_RDWR); + if (fd < 0) + exit(1); + data2 = malloc(2 * pagesize); + if (!data2) + exit(1); + data2 += (pagesize - ((int) data2 & (pagesize - 1))) & (pagesize - 1); + if (data2 != mmap(data2, pagesize, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_FIXED, fd, 0L)) + exit(1); + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data2 + i)) + exit(1); + + /* + * Finally, make sure that changes to the mapped area + * do not percolate back to the file as seen by read(). + * (This is a bug on some variants of i386 svr4.0.) + */ + for (i = 0; i < pagesize; ++i) + *(data2 + i) = *(data2 + i) + 1; + data3 = malloc(pagesize); + if (!data3) + exit(1); + if (read(fd, data3, pagesize) != pagesize) + exit(1); + for (i = 0; i < pagesize; ++i) + if (*(data + i) != *(data3 + i)) + exit(1); + close(fd); + unlink("conftestmmap"); + exit(0); +} + +EOF +if { (eval echo configure:3512: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + ac_cv_func_mmap_fixed_mapped=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -fr conftest* + ac_cv_func_mmap_fixed_mapped=no +fi +rm -fr conftest* +fi + +fi + +echo "$ac_t""$ac_cv_func_mmap_fixed_mapped" 1>&6 +if test $ac_cv_func_mmap_fixed_mapped = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_MMAP 1 +EOF + +fi + + + for ac_hdr in argz.h limits.h locale.h nl_types.h malloc.h string.h \ +unistd.h values.h sys/param.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3540: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3550: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done + + for ac_func in getcwd munmap putenv setenv setlocale strchr strcasecmp \ +__argz_count __argz_stringify __argz_next +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:3580: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:3608: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + + + if test "${ac_cv_func_stpcpy+set}" != "set"; then + for ac_func in stpcpy +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:3637: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:3665: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* +fi + +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 +fi +done + + fi + if test "${ac_cv_func_stpcpy}" = "yes"; then + cat >> confdefs.h <<\EOF +#define HAVE_STPCPY 1 +EOF + + fi + + if test $ac_cv_header_locale_h = yes; then + echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 +echo "configure:3699: checking for LC_MESSAGES" >&5 +if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int main() { +return LC_MESSAGES +; return 0; } +EOF +if { (eval echo configure:3711: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + am_cv_val_LC_MESSAGES=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + am_cv_val_LC_MESSAGES=no +fi +rm -f conftest* +fi + +echo "$ac_t""$am_cv_val_LC_MESSAGES" 1>&6 + if test $am_cv_val_LC_MESSAGES = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_LC_MESSAGES 1 +EOF + + fi + fi + echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 +echo "configure:3732: checking whether NLS is requested" >&5 + # Check whether --enable-nls or --disable-nls was given. +if test "${enable_nls+set}" = set; then + enableval="$enable_nls" + USE_NLS=$enableval +else + USE_NLS=yes +fi + + echo "$ac_t""$USE_NLS" 1>&6 + + + USE_INCLUDED_LIBINTL=no + + if test "$USE_NLS" = "yes"; then + cat >> confdefs.h <<\EOF +#define ENABLE_NLS 1 +EOF + + echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 +echo "configure:3752: checking whether included gettext is requested" >&5 + # Check whether --with-included-gettext or --without-included-gettext was given. +if test "${with_included_gettext+set}" = set; then + withval="$with_included_gettext" + nls_cv_force_use_gnu_gettext=$withval +else + nls_cv_force_use_gnu_gettext=no +fi + + echo "$ac_t""$nls_cv_force_use_gnu_gettext" 1>&6 + + nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" + if test "$nls_cv_force_use_gnu_gettext" != "yes"; then + nls_cv_header_intl= + nls_cv_header_libgt= + CATOBJEXT=NONE + + ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 +echo "configure:3771: checking for libintl.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3781: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 +echo "configure:3798: checking for gettext in libc" >&5 +if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +int main() { +return (int) gettext ("") +; return 0; } +EOF +if { (eval echo configure:3810: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + gt_cv_func_gettext_libc=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + gt_cv_func_gettext_libc=no +fi +rm -f conftest* +fi + +echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 + + if test "$gt_cv_func_gettext_libc" != "yes"; then + echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 +echo "configure:3826: checking for bindtextdomain in -lintl" >&5 +ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lintl $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 +echo "configure:3861: checking for gettext in libintl" >&5 +if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + gt_cv_func_gettext_libintl=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + gt_cv_func_gettext_libintl=no +fi +rm -f conftest* +fi + +echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + fi + + if test "$gt_cv_func_gettext_libc" = "yes" \ + || test "$gt_cv_func_gettext_libintl" = "yes"; then + cat >> confdefs.h <<\EOF +#define HAVE_GETTEXT 1 +EOF + + # Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3901: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$MSGFMT" in + /*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then + ac_cv_path_MSGFMT="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="no" + ;; +esac +fi +MSGFMT="$ac_cv_path_MSGFMT" +if test -n "$MSGFMT"; then + echo "$ac_t""$MSGFMT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + if test "$MSGFMT" != "no"; then + for ac_func in dcgettext +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:3935: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); + +int main() { + +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:3963: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" fi rm -f conftest* - fi -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 fi +done - -for ac_prog in 'bison -y' byacc -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1510: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then +echo "configure:3990: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$YACC"; then - ac_cv_prog_YACC="$YACC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + case "$GMSGFMT" in + /*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_YACC="$ac_prog" + ac_cv_path_GMSGFMT="$ac_dir/$ac_word" break fi done IFS="$ac_save_ifs" + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac fi -fi -YACC="$ac_cv_prog_YACC" -if test -n "$YACC"; then - echo "$ac_t""$YACC" 1>&6 +GMSGFMT="$ac_cv_path_GMSGFMT" +if test -n "$GMSGFMT"; then + echo "$ac_t""$GMSGFMT" 1>&6 else echo "$ac_t""no" 1>&6 fi -test -n "$YACC" && break -done -test -n "$YACC" || YACC="yacc" - -# Extract the first word of "flex", so it can be a program name with args. -set dummy flex; ac_word=$2 + # Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1542: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then +echo "configure:4026: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$LEX"; then - ac_cv_prog_LEX="$LEX" # Let the user override the test. -else + case "$XGETTEXT" in + /*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_LEX="flex" - break + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word" + break + fi fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_LEX" && ac_cv_prog_LEX="lex" -fi + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac fi -LEX="$ac_cv_prog_LEX" -if test -n "$LEX"; then - echo "$ac_t""$LEX" 1>&6 +XGETTEXT="$ac_cv_path_XGETTEXT" +if test -n "$XGETTEXT"; then + echo "$ac_t""$XGETTEXT" 1>&6 else echo "$ac_t""no" 1>&6 fi -if test -z "$LEXLIB" -then - case "$LEX" in - flex*) ac_lib=fl ;; - *) ac_lib=l ;; - esac - echo $ac_n "checking for yywrap in -l$ac_lib""... $ac_c" 1>&6 -echo "configure:1575: checking for yywrap in -l$ac_lib" >&5 -ac_lib_var=`echo $ac_lib'_'yywrap | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-l$ac_lib $LIBS" -cat > conftest.$ac_ext < conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:4066: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" + CATOBJEXT=.gmo + DATADIRNAME=share else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" + CATOBJEXT=.mo + DATADIRNAME=lib fi rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - LEXLIB="-l$ac_lib" + INSTOBJEXT=.mo + fi + fi + else echo "$ac_t""no" 1>&6 fi -fi -echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1617: checking how to run the C preprocessor" >&5 -# On Suns, sometimes $CPP names a directory. -if test -n "$CPP" && test -d "$CPP"; then - CPP= -fi -if test -z "$CPP"; then -if eval "test \"`echo '$''{'ac_cv_prog_CPP'+set}'`\" = set"; then + + if test "$CATOBJEXT" = "NONE"; then + nls_cv_use_gnu_gettext=yes + fi + fi + + if test "$nls_cv_use_gnu_gettext" = "yes"; then + INTLOBJS="\$(GETTOBJS)" + # Extract the first word of "msgfmt", so it can be a program name with args. +set dummy msgfmt; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:4098: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - # This must be in double quotes, not single quotes, because CPP may get - # substituted into the Makefile and "${CC-cc}" will confuse make. - CPP="${CC-cc} -E" - # On the NeXT, cc -E runs the code through the compiler's parser, - # not just through cpp. - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1638: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP="${CC-cc} -E -traditional-cpp" - cat > conftest.$ac_ext < -Syntax Error -EOF -ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1655: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` -if test -z "$ac_err"; then - : -else - echo "$ac_err" >&5 - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CPP=/lib/cpp + case "$MSGFMT" in + /*) + ac_cv_path_MSGFMT="$MSGFMT" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then + ac_cv_path_MSGFMT="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_MSGFMT" && ac_cv_path_MSGFMT="msgfmt" + ;; +esac fi -rm -f conftest* +MSGFMT="$ac_cv_path_MSGFMT" +if test -n "$MSGFMT"; then + echo "$ac_t""$MSGFMT" 1>&6 +else + echo "$ac_t""no" 1>&6 fi -rm -f conftest* - ac_cv_prog_CPP="$CPP" + + # Extract the first word of "gmsgfmt", so it can be a program name with args. +set dummy gmsgfmt; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:4132: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case "$GMSGFMT" in + /*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. + ;; + ?:/*) + ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_path_GMSGFMT="$ac_dir/$ac_word" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="$MSGFMT" + ;; +esac fi - CPP="$ac_cv_prog_CPP" +GMSGFMT="$ac_cv_path_GMSGFMT" +if test -n "$GMSGFMT"; then + echo "$ac_t""$GMSGFMT" 1>&6 else - ac_cv_prog_CPP="$CPP" + echo "$ac_t""no" 1>&6 fi -echo "$ac_t""$CPP" 1>&6 -echo $ac_n "checking lex output file root""... $ac_c" 1>&6 -echo "configure:1678: checking lex output file root" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_lex_root'+set}'`\" = set"; then + # Extract the first word of "xgettext", so it can be a program name with args. +set dummy xgettext; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:4168: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - # The minimal lex program is just a single line: %%. But some broken lexes -# (Solaris, I think it was) want two %% lines, so accommodate them. -echo '%% -%%' | $LEX -if test -f lex.yy.c; then - ac_cv_prog_lex_root=lex.yy -elif test -f lexyy.c; then - ac_cv_prog_lex_root=lexyy -else - { echo "configure: error: cannot find output from $LEX; giving up" 1>&2; exit 1; } + case "$XGETTEXT" in + /*) + ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. + ;; + *) + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + for ac_dir in $PATH; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then + ac_cv_path_XGETTEXT="$ac_dir/$ac_word" + break + fi + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" + ;; +esac fi +XGETTEXT="$ac_cv_path_XGETTEXT" +if test -n "$XGETTEXT"; then + echo "$ac_t""$XGETTEXT" 1>&6 +else + echo "$ac_t""no" 1>&6 fi -echo "$ac_t""$ac_cv_prog_lex_root" 1>&6 -LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root + + USE_INCLUDED_LIBINTL=yes + CATOBJEXT=.gmo + INSTOBJEXT=.mo + DATADIRNAME=share + INTLDEPS='$(top_builddir)/../intl/libintl.a' + INTLLIBS=$INTLDEPS + LIBS=`echo $LIBS | sed -e 's/-lintl//'` + nls_cv_header_intl=libintl.h + nls_cv_header_libgt=libgettext.h + fi -echo $ac_n "checking whether yytext is a pointer""... $ac_c" 1>&6 -echo "configure:1699: checking whether yytext is a pointer" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_lex_yytext_pointer'+set}'`\" = set"; then + if test "$XGETTEXT" != ":"; then + if $XGETTEXT --omit-header /dev/null 2> /dev/null; then + : ; + else + echo "$ac_t""found xgettext programs is not GNU xgettext; ignore it" 1>&6 + XGETTEXT=":" + fi + fi + + # We need to process the po/ directory. + POSUB=po + else + DATADIRNAME=share + nls_cv_header_intl=libintl.h + nls_cv_header_libgt=libgettext.h + fi + + # If this is used in GNU gettext we have to set USE_NLS to `yes' + # because some of the sources are only built for this goal. + if test "$PACKAGE" = gettext; then + USE_NLS=yes + USE_INCLUDED_LIBINTL=yes + fi + + for lang in $ALL_LINGUAS; do + GMOFILES="$GMOFILES $lang.gmo" + POFILES="$POFILES $lang.po" + done + + + + + + + + + + + + + + + if test "x$CATOBJEXT" != "x"; then + if test "x$ALL_LINGUAS" = "x"; then + LINGUAS= + else + echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 +echo "configure:4258: checking for catalogs to be installed" >&5 + NEW_LINGUAS= + for lang in ${LINGUAS=$ALL_LINGUAS}; do + case "$ALL_LINGUAS" in + *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; + esac + done + LINGUAS=$NEW_LINGUAS + echo "$ac_t""$LINGUAS" 1>&6 + fi + + if test -n "$LINGUAS"; then + for lang in $LINGUAS; do CATALOGS="$CATALOGS $lang$CATOBJEXT"; done + fi + fi + + if test $ac_cv_header_locale_h = yes; then + INCLUDE_LOCALE_H="#include " + else + INCLUDE_LOCALE_H="\ +/* The system does not provide the header . Take care yourself. */" + fi + + + if test -f $srcdir/po2tbl.sed.in; then + if test "$CATOBJEXT" = ".cat"; then + ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 +echo "configure:4286: checking for linux/version.h" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - # POSIX says lex can declare yytext either as a pointer or an array; the -# default is implementation-dependent. Figure out which it is, since -# not all implementations provide the %pointer and %array declarations. -ac_cv_prog_lex_yytext_pointer=no -echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c -ac_save_LIBS="$LIBS" -LIBS="$LIBS $LEXLIB" -cat > conftest.$ac_ext < conftest.$ac_ext < EOF -if { (eval echo configure:1718: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:4296: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then rm -rf conftest* - ac_cv_prog_lex_yytext_pointer=yes + eval "ac_cv_header_$ac_safe=yes" else + echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* -LIBS="$ac_save_LIBS" -rm -f "${LEX_OUTPUT_ROOT}.c" - fi - -echo "$ac_t""$ac_cv_prog_lex_yytext_pointer" 1>&6 -if test $ac_cv_prog_lex_yytext_pointer = yes; then - cat >> confdefs.h <<\EOF -#define YYTEXT_POINTER 1 -EOF - +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + msgformat=linux +else + echo "$ac_t""no" 1>&6 +msgformat=xopen fi + sed -e '/^#/d' $srcdir/$msgformat-msg.sed > po2msg.sed + fi + sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ + $srcdir/po2tbl.sed.in > po2tbl.sed + fi + + if test "$PACKAGE" = "gettext"; then + GT_NO="#NO#" + GT_YES= + else + GT_NO= + GT_YES="#YES#" + fi + + + + MKINSTALLDIRS="\$(srcdir)/../../mkinstalldirs" + + + l= + + + if test -d $srcdir/po; then + test -d po || mkdir po + if test "x$srcdir" != "x."; then + if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then + posrcprefix="$srcdir/" + else + posrcprefix="../$srcdir/" + fi + else + posrcprefix="../" + fi + rm -f po/POTFILES + sed -e "/^#/d" -e "/^\$/d" -e "s,.*, $posrcprefix& \\\\," -e "\$s/\(.*\) \\\\/\1/" \ + < $srcdir/po/POTFILES.in > po/POTFILES + fi + + echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:1741: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4359: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -1747,97 +4365,60 @@ else fi echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 - if test $USE_MAINTAINER_MODE = yes; then - MAINT= - else - MAINT='#M#' - fi -echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6 -echo "configure:1759: checking for Cygwin32 environment" >&5 -if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - am_cv_cygwin32=yes +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - am_cv_cygwin32=no -fi -rm -f conftest* -rm -f conftest* + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= fi + MAINT=$MAINTAINER_MODE_TRUE + -echo "$ac_t""$am_cv_cygwin32" 1>&6 -CYGWIN32= -test "$am_cv_cygwin32" = yes && CYGWIN32=yes -echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6 -echo "configure:1788: checking for Mingw32 environment" >&5 -if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then + + +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:4384: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - am_cv_mingw32=yes + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - am_cv_mingw32=no + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:4394: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no fi -rm -f conftest* -rm -f conftest* fi -echo "$ac_t""$am_cv_mingw32" 1>&6 -MINGW32= -test "$am_cv_mingw32" = yes && MINGW32=yes - +EXEEXT="" +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT -echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:1819: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - -if test "$CYGWIN32" = yes -o "$MINGW32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} +if test -n "$EXEEXT"; then + cat >> confdefs.h <<\EOF +#define HAVE_EXECUTABLE_SUFFIX 1 EOF -${CC-cc} -o am_c_test $CFLAGS $CPPFLAGS $LDFLAGS am_c_test.c $LIBS 1>&5 -am_cv_exeext=`echo am_c_test.* | grep -v am_c_test.c | sed -e s/am_c_test//` -rm -f am_c_test* -fi -test x"${am_cv_exeext}" = x && am_cv_exeext=no fi -EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 +cat >> confdefs.h <&6 -echo "configure:1856: checking for $ac_word" >&5 +echo "configure:4437: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$RANLIB"; then ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_RANLIB="ranlib" @@ -1878,9 +4460,70 @@ else echo "$ac_t""no" 1>&6 fi +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:4476: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi +fi +echo "$ac_t""$INSTALL" 1>&6 + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + # Put a plausible default for CC_FOR_BUILD in Makefile. if test -z "$CC_FOR_BUILD"; then @@ -1896,19 +4539,22 @@ if test "x$cross_compiling" = "xno"; then EXEEXT_FOR_BUILD='$(EXEEXT)' else echo $ac_n "checking for build system executable suffix""... $ac_c" 1>&6 -echo "configure:1900: checking for build system executable suffix" >&5 +echo "configure:4543: checking for build system executable suffix" >&5 if eval "test \"`echo '$''{'bfd_cv_build_exeext'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - cat > ac_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} -EOF - ${CC_FOR_BUILD} -o ac_c_test am_c_test.c 1>&5 2>&5 - bfd_cv_build_exeext=`echo ac_c_test.* | grep -v ac_c_test.c | sed -e s/ac_c_test//` - rm -f ac_c_test* - test x"${bfd_cv_build_exeext}" = x && bfd_cv_build_exeext=no + rm -f conftest* + echo 'int main () { return 0; }' > conftest.c + bfd_cv_build_exeext= + ${CC_FOR_BUILD} -o conftest conftest.c 1>&5 2>&5 + for file in conftest.*; do + case $file in + *.c | *.o | *.obj | *.ilk | *.pdb) ;; + *) bfd_cv_build_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + rm -f conftest* + test x"${bfd_cv_build_exeext}" = x && bfd_cv_build_exeext=no fi echo "$ac_t""$bfd_cv_build_exeext" 1>&6 @@ -1917,22 +4563,29 @@ echo "$ac_t""$bfd_cv_build_exeext" 1>&6 fi +DEMANGLER_NAME=c++filt +case "${host}" in + *-*-go32* | *-*-msdos*) + DEMANGLER_NAME=cxxfilt +esac + + for ac_hdr in string.h strings.h stdlib.h unistd.h fcntl.h sys/file.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1925: checking for $ac_hdr" >&5 +echo "configure:4578: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1935: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:4588: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -1958,12 +4611,12 @@ fi done echo $ac_n "checking for sys/wait.h that is POSIX.1 compatible""... $ac_c" 1>&6 -echo "configure:1962: checking for sys/wait.h that is POSIX.1 compatible" >&5 +echo "configure:4615: checking for sys/wait.h that is POSIX.1 compatible" >&5 if eval "test \"`echo '$''{'ac_cv_header_sys_wait_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -1979,7 +4632,7 @@ wait (&s); s = WIFEXITED (s) ? WEXITSTATUS (s) : 1; ; return 0; } EOF -if { (eval echo configure:1983: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:4636: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_header_sys_wait_h=yes else @@ -2002,19 +4655,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:2006: checking for working alloca.h" >&5 +echo "configure:4659: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:2018: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:4671: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -2035,25 +4688,30 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:2039: checking for alloca" >&5 +echo "configure:4692: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < +# ifdef _MSC_VER +# include +# define alloca _alloca # else -# ifdef _AIX - #pragma alloca +# if HAVE_ALLOCA_H +# include # else -# ifndef alloca /* predefined by HP cc +Olibcalls */ +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); +# endif # endif # endif # endif @@ -2063,7 +4721,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:2067: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:4725: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -2088,19 +4746,19 @@ if test $ac_cv_func_alloca_works = no; then # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. - ALLOCA=alloca.o + ALLOCA=alloca.${ac_objext} cat >> confdefs.h <<\EOF #define C_ALLOCA 1 EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:2099: checking whether alloca needs Cray hooks" >&5 +echo "configure:4757: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2129: checking for $ac_func" >&5 +echo "configure:4787: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:4815: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2180,7 +4838,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:2184: checking stack direction for C alloca" >&5 +echo "configure:4842: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2188,7 +4846,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:4869: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -2228,15 +4886,15 @@ EOF fi -for ac_func in sbrk utimes +for ac_func in sbrk utimes setmode do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2235: checking for $ac_func" >&5 +echo "configure:4893: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:4921: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2284,20 +4942,84 @@ fi done +# Some systems have frexp only in -lm, not in -lc. + +echo $ac_n "checking for library containing frexp""... $ac_c" 1>&6 +echo "configure:4949: checking for library containing frexp" >&5 +if eval "test \"`echo '$''{'ac_cv_search_frexp'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_func_search_save_LIBS="$LIBS" +ac_cv_search_frexp="no" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_cv_search_frexp="none required" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +test "$ac_cv_search_frexp" = "no" && for i in m; do +LIBS="-l$i $ac_func_search_save_LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_cv_search_frexp="-l$i" +break +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 +fi +rm -f conftest* +done +LIBS="$ac_func_search_save_LIBS" +fi + +echo "$ac_t""$ac_cv_search_frexp" 1>&6 +if test "$ac_cv_search_frexp" != "no"; then + test "$ac_cv_search_frexp" = "none required" || LIBS="$ac_cv_search_frexp $LIBS" + +else : + +fi + echo $ac_n "checking for time_t in time.h""... $ac_c" 1>&6 -echo "configure:2289: checking for time_t in time.h" >&5 +echo "configure:5011: checking for time_t in time.h" >&5 if eval "test \"`echo '$''{'bu_cv_decl_time_t_time_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { time_t i; ; return 0; } EOF -if { (eval echo configure:2301: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5023: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bu_cv_decl_time_t_time_h=yes else @@ -2318,19 +5040,19 @@ EOF fi echo $ac_n "checking for time_t in sys/types.h""... $ac_c" 1>&6 -echo "configure:2322: checking for time_t in sys/types.h" >&5 +echo "configure:5044: checking for time_t in sys/types.h" >&5 if eval "test \"`echo '$''{'bu_cv_decl_time_t_types_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { time_t i; ; return 0; } EOF -if { (eval echo configure:2334: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5056: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bu_cv_decl_time_t_types_h=yes else @@ -2353,12 +5075,12 @@ fi # Under Next 3.2 apparently does not define struct utimbuf # by default. echo $ac_n "checking for utime.h""... $ac_c" 1>&6 -echo "configure:2357: checking for utime.h" >&5 +echo "configure:5079: checking for utime.h" >&5 if eval "test \"`echo '$''{'bu_cv_header_utime_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #ifdef HAVE_TIME_H @@ -2369,7 +5091,7 @@ int main() { struct utimbuf s; ; return 0; } EOF -if { (eval echo configure:2373: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5095: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bu_cv_header_utime_h=yes else @@ -2390,12 +5112,12 @@ EOF fi echo $ac_n "checking whether fprintf must be declared""... $ac_c" 1>&6 -echo "configure:2394: checking whether fprintf must be declared" >&5 +echo "configure:5116: checking whether fprintf must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_fprintf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -2416,7 +5138,7 @@ int main() { char *(*pfn) = (char *(*)) fprintf ; return 0; } EOF -if { (eval echo configure:2420: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5142: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_fprintf=no else @@ -2430,20 +5152,19 @@ fi echo "$ac_t""$bfd_cv_decl_needed_fprintf" 1>&6 if test $bfd_cv_decl_needed_fprintf = yes; then - bfd_tr_decl=NEED_DECLARATION_`echo fprintf | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <> confdefs.h <<\EOF +#define NEED_DECLARATION_FPRINTF 1 EOF fi echo $ac_n "checking whether strstr must be declared""... $ac_c" 1>&6 -echo "configure:2442: checking whether strstr must be declared" >&5 +echo "configure:5163: checking whether strstr must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_strstr'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -2464,7 +5185,7 @@ int main() { char *(*pfn) = (char *(*)) strstr ; return 0; } EOF -if { (eval echo configure:2468: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5189: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_strstr=no else @@ -2478,20 +5199,19 @@ fi echo "$ac_t""$bfd_cv_decl_needed_strstr" 1>&6 if test $bfd_cv_decl_needed_strstr = yes; then - bfd_tr_decl=NEED_DECLARATION_`echo strstr | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <> confdefs.h <<\EOF +#define NEED_DECLARATION_STRSTR 1 EOF fi echo $ac_n "checking whether sbrk must be declared""... $ac_c" 1>&6 -echo "configure:2490: checking whether sbrk must be declared" >&5 +echo "configure:5210: checking whether sbrk must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_sbrk'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -2512,7 +5232,7 @@ int main() { char *(*pfn) = (char *(*)) sbrk ; return 0; } EOF -if { (eval echo configure:2516: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5236: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_sbrk=no else @@ -2526,20 +5246,19 @@ fi echo "$ac_t""$bfd_cv_decl_needed_sbrk" 1>&6 if test $bfd_cv_decl_needed_sbrk = yes; then - bfd_tr_decl=NEED_DECLARATION_`echo sbrk | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <> confdefs.h <<\EOF +#define NEED_DECLARATION_SBRK 1 EOF fi echo $ac_n "checking whether getenv must be declared""... $ac_c" 1>&6 -echo "configure:2538: checking whether getenv must be declared" >&5 +echo "configure:5257: checking whether getenv must be declared" >&5 if eval "test \"`echo '$''{'bfd_cv_decl_needed_getenv'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < @@ -2560,7 +5279,7 @@ int main() { char *(*pfn) = (char *(*)) getenv ; return 0; } EOF -if { (eval echo configure:2564: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:5283: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* bfd_cv_decl_needed_getenv=no else @@ -2574,9 +5293,55 @@ fi echo "$ac_t""$bfd_cv_decl_needed_getenv" 1>&6 if test $bfd_cv_decl_needed_getenv = yes; then - bfd_tr_decl=NEED_DECLARATION_`echo getenv | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` - cat >> confdefs.h <> confdefs.h <<\EOF +#define NEED_DECLARATION_GETENV 1 +EOF + +fi + +echo $ac_n "checking whether environ must be declared""... $ac_c" 1>&6 +echo "configure:5304: checking whether environ must be declared" >&5 +if eval "test \"`echo '$''{'bfd_cv_decl_needed_environ'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext < +#ifdef HAVE_STRING_H +#include +#else +#ifdef HAVE_STRINGS_H +#include +#endif +#endif +#ifdef HAVE_STDLIB_H +#include +#endif +#ifdef HAVE_UNISTD_H +#include +#endif +int main() { +char *(*pfn) = (char *(*)) environ +; return 0; } +EOF +if { (eval echo configure:5330: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + bfd_cv_decl_needed_environ=no +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + bfd_cv_decl_needed_environ=yes +fi +rm -f conftest* +fi + +echo "$ac_t""$bfd_cv_decl_needed_environ" 1>&6 +if test $bfd_cv_decl_needed_environ = yes; then + cat >> confdefs.h <<\EOF +#define NEED_DECLARATION_ENVIRON 1 EOF fi @@ -2584,7 +5349,7 @@ fi case "${host}" in -i[345]86-*-msdos* | i[345]86-*-go32* | i[345]86-*-mingw32* | *-*-cygwin32* | *-*-windows) +*-*-msdos* | *-*-go32* | *-*-mingw32* | *-*-cygwin* | *-*-windows*) cat >> confdefs.h <<\EOF #define USE_BINARY_FOPEN 1 EOF @@ -2597,7 +5362,7 @@ esac if test -n "$enable_targets"; then for targ in `echo $enable_targets | sed 's/,/ /g'` do - result=`${CONFIG_SHELL-/bin/sh} $ac_config_sub $targ 2>/dev/null` + result=`$ac_config_sub $targ 2>/dev/null` if test -n "$result"; then canon_targets="$canon_targets $result" else @@ -2614,13 +5379,16 @@ BUILD_SRCONV= BUILD_DLLTOOL= DLLTOOL_DEFS= BUILD_WINDRES= +BUILD_DLLWRAP= +BUILD_MISC= +OBJDUMP_DEFS= for targ in $target $canon_targets do if test "x$targ" = "xall"; then all_targets=true BUILD_NLMCONV='$(NLMCONV_PROG)$(EXEEXT)' - BUILD_SRCONV='$(SRCONV_PROG)$(EXEEXT)' + BUILD_SRCONV='$(SRCONV_PROG)' NLMCONV_DEFS="-DNLMCONV_I386 -DNLMCONV_ALPHA -DNLMCONV_POWERPC -DNLMCONV_SPARC" else case $targ in @@ -2642,28 +5410,72 @@ do ;; esac case $targ in - *-*-hms*) BUILD_SRCONV='$(SRCONV_PROG)$(EXEEXT)' ;; + *-*-hms*) BUILD_SRCONV='$(SRCONV_PROG)' ;; esac case $targ in - arm-*pe*) + arm-epoc-pe*) + BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM_EPOC -DDLLTOOL_ARM" + BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' + ;; + arm-*pe* | arm-*-wince) + BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM" + BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' + ;; + thumb-*pe*) BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_ARM" BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' - ;; - i[3-6]86-*pe* | i[3-6]86-*-cygwin32* | i[3-6]86-*-mingw32*) + ;; + arm*-* | xscale-* | strongarm-* | d10v-*) + OBJDUMP_DEFS="-DDISASSEMBLER_NEEDS_RELOCS" + ;; + i[3-6]86-*pe* | i[3-6]86-*-cygwin* | i[3-6]86-*-mingw32*) BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386" BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' - ;; - powerpc*-*-*pe* | powerpc*-*-cygwin32) + BUILD_DLLWRAP='$(DLLWRAP_PROG)$(EXEEXT)' + ;; + i3-686-*-interix) + BUILD_DLLTOOL='$(DLLTOOL_PROG)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_I386" + ;; + powerpc*-*-*pe* | powerpc*-*-cygwin*) BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_PPC" BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' - ;; + ;; + sh*-*-*pe) + BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_SH" + BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' + ;; + mips*-*-*pe) + BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_MIPS" + BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' + ;; + mcore-*pe) + BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_MCORE" + BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' + ;; + mcore-*elf) + BUILD_DLLTOOL='$(DLLTOOL_PROG)$(EXEEXT)' + DLLTOOL_DEFS="$DLLTOOL_DEFS -DDLLTOOL_MCORE_ELF" + ;; esac fi done +if test "${with_windres+set}" = set; then + BUILD_WINDRES='$(WINDRES_PROG)$(EXEEXT)' +fi + + + + @@ -2708,7 +5520,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -2775,7 +5587,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.1" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -2786,7 +5598,7 @@ done ac_given_srcdir=$srcdir ac_given_INSTALL="$INSTALL" -trap 'rm -fr `echo "Makefile config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 +trap 'rm -fr `echo "Makefile doc/Makefile po/Makefile.in:po/Make-in config.h:config.in" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS <> $CONFIG_STATUS <> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then @@ -3083,6 +5923,10 @@ EOF cat >> $CONFIG_STATUS <<\EOF test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h +case "x$CONFIG_FILES" in +*) sed -e '/POTFILES =/r po/POTFILES' po/Makefile.in > po/Makefile ;; +esac + exit 0 EOF chmod +x $CONFIG_STATUS