X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=config-ml.in;h=aae3f87fe74e5d9538e68ccde051aba58a83c1b1;hb=50e0eb665300b8fcb6e98b52772fb2d90483841e;hp=e5567a920b606ded3f4c5ab13b114e037c7366d1;hpb=3130a391193cf83f61785181cf8f133f2d407b2e;p=deliverable%2Fbinutils-gdb.git

diff --git a/config-ml.in b/config-ml.in
index e5567a920b..aae3f87fe7 100644
--- a/config-ml.in
+++ b/config-ml.in
@@ -72,14 +72,16 @@
 # We have to handle being invoked by both Cygnus configure and Autoconf.
 #
 # Cygnus configure incoming variables:
-# srcdir, subdir, target, arguments
+# srcdir, subdir, host, arguments
 #
 # Autoconf incoming variables:
-# srcdir, target, ac_configure_args
+# srcdir, host, ac_configure_args
 #
-# We *could* figure srcdir and target out, but we'd have to do work that
+# We *could* figure srcdir and host out, but we'd have to do work that
 # our caller has already done to figure them out and requiring these two
 # seems reasonable.
+# Note that `host' in this case is GCC's `target'.  Target libraries are
+# configured for a particular host.
 
 if [ -n "${ac_configure_args}" ]; then
   Makefile=${ac_file-Makefile}
@@ -99,6 +101,7 @@ fi
 
 # Scan all the arguments and set all the ones we need.
 
+ml_verbose=--verbose
 for option in ${ml_arguments}
 do
   case $option in
@@ -128,6 +131,9 @@ do
   --norecursion | --no*)
 	ml_norecursion=yes
 	;;
+  --silent | --sil* | --quiet | --q*)
+	ml_verbose=--silent
+	;;
   --verbose | --v | --verb*)
 	ml_verbose=--verbose
 	;;
@@ -200,7 +206,10 @@ for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do
   fi
 done
 
-case "${target}" in
+# Target libraries are configured for the host they run on, so we check
+# $host here, not $target.
+
+case "${host}" in
 arc-*-elf*)
 	if [ x$enable_biendian != xyes ]
 	then
@@ -214,14 +223,70 @@ arc-*-elf*)
 	  done
 	fi
 	;;
-m32r-*-*)
-	if [ x$enable_m32rx = xno ]
+arm-*-*)
+	if [ x"$enable_fpu" = xno ]
+	then
+	  old_multidirs=${multidirs}
+	  multidirs=""
+	  for x in ${old_multidirs}; do
+	    case "${x}" in
+	      *fpu*) : ;;
+	      *) multidirs="${multidirs} ${x}" ;;
+	    esac
+	  done
+	fi
+	if [ x"$enable_26bit" = xno ]
 	then
 	  old_multidirs=${multidirs}
 	  multidirs=""
 	  for x in ${old_multidirs}; do
 	    case "${x}" in
-	      *m32rx*) : ;;
+	      *26bit*) : ;;
+	      *) multidirs="${multidirs} ${x}" ;;
+	    esac
+	  done
+	fi
+	if [ x"$enable_underscore" = xno ]
+	then
+	  old_multidirs=${multidirs}
+	  multidirs=""
+	  for x in ${old_multidirs}; do
+	    case "${x}" in
+	      *under*) : ;;
+	      *) multidirs="${multidirs} ${x}" ;;
+	    esac
+	  done
+	fi
+	if [ x"$enable_interwork" = xno ]
+	then
+	  old_multidirs=${multidirs}
+	  multidirs=""
+	  for x in ${old_multidirs}; do
+	    case "${x}" in
+	      *interwork*) : ;;
+	      *) multidirs="${multidirs} ${x}" ;;
+	    esac
+	  done
+	fi
+	if [ x$enable_biendian = xno ]
+	then
+	  old_multidirs="${multidirs}"
+	  multidirs=""
+	  for x in ${old_multidirs}; do
+	    case "$x" in
+	      *le* ) : ;;
+	      *be* ) : ;;
+	      *) multidirs="${multidirs} ${x}" ;;
+	    esac
+	  done
+	fi
+	if [ x"$enable_nofmult" = xno ]
+	then
+	  old_multidirs="${multidirs}"
+	  multidirs=""
+	  for x in ${old_multidirs}; do
+	    case "$x" in
+	      *nofmult* ) : ;;
 	      *) multidirs="${multidirs} ${x}" ;;
 	    esac
 	  done
@@ -308,6 +373,28 @@ mips*-*-*)
 	    esac
 	  done
 	fi
+	case " $multidirs " in
+	*" mabi=64 "*)
+	  # We will not be able to create libraries with -mabi=64 if
+	  # we cannot even link a trivial program.  It usually
+	  # indicates the 64bit libraries are missing.
+	  if echo 'main() {}' > conftest.c &&
+	     ${CC-gcc} -mabi=64 conftest.c -o conftest; then
+	    :
+	  else
+	    echo Could not link program with -mabi=64, disabling it.
+	    old_multidirs="${multidirs}"
+	    multidirs=""
+	    for x in ${old_multidirs}; do
+	      case "$x" in
+	      *mabi=64* ) : ;;
+	      *) multidirs="${multidirs} ${x}" ;;
+	      esac
+	    done
+	  fi
+	  rm -f conftest.c conftest
+	  ;;
+	esac
 	;;
 powerpc*-*-* | rs6000*-*-*)
 	if [ x$enable_softfloat = xno ]
@@ -388,6 +475,30 @@ powerpc*-*-* | rs6000*-*-*)
 	  done
 	fi
 	;;
+sparc*-*-*)
+	case " $multidirs " in
+	*" m64 "*)
+	  # We will not be able to create libraries with -m64 if
+	  # we cannot even link a trivial program.  It usually
+	  # indicates the 64bit libraries are missing.
+	  if echo 'main() {}' > conftest.c &&
+	     ${CC-gcc} -m64 conftest.c -o conftest; then
+	    :
+	  else
+	    echo Could not link program with -m64, disabling it.
+	    old_multidirs="${multidirs}"
+	    multidirs=""
+	    for x in ${old_multidirs}; do
+	      case "$x" in
+	      *m64* ) : ;;
+	      *) multidirs="${multidirs} ${x}" ;;
+	      esac
+	    done
+	  fi
+	  rm -f conftest.c conftest
+	  ;;
+	esac
+	;;
 esac
 
 # Remove extraneous blanks from multidirs.
@@ -399,14 +510,16 @@ multidirs=`echo "$multidirs" | sed -e 's/^[ ][ ]*//' -e 's/[ ][ ]*$//' -e 's/[ ]
 
 cat > Multi.tem <<\EOF
 
+PWD=$${PWDCMD-pwd}
+
 # FIXME: There should be an @-sign in front of the `if'.
 # Leave out until this is tested a bit more.
 multi-do:
 	if [ -z "$(MULTIDIRS)" ]; then \
 	  true; \
 	else \
-	  rootpre=`pwd`/; export rootpre; \
-	  srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
+	  rootpre=`${PWD}`/; export rootpre; \
+	  srcrootpre=`cd $(srcdir); ${PWD}`/; export srcrootpre; \
 	  lib=`echo $${rootpre} | sed -e 's,^.*/\([^/][^/]*\)/$$,\1,'`; \
 	  compiler="$(CC)"; \
 	  for i in `$${compiler} --print-multi-lib 2>/dev/null`; do \
@@ -418,9 +531,13 @@ multi-do:
 		flags=`echo $$i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`; \
 		if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) \
 				CFLAGS="$(CFLAGS) $${flags}" \
+				prefix="$(prefix)" \
+				exec_prefix="$(exec_prefix)" \
 				CXXFLAGS="$(CXXFLAGS) $${flags}" \
 				LIBCFLAGS="$(LIBCFLAGS) $${flags}" \
 				LIBCXXFLAGS="$(LIBCXXFLAGS) $${flags}" \
+				LDFLAGS="$(LDFLAGS) $${flags}" \
+				DESTDIR="$(DESTDIR)" \
 				$(DO)); then \
 		  true; \
 		else \
@@ -438,7 +555,7 @@ multi-clean:
 	if [ -z "$(MULTIDIRS)" ]; then \
 	  true; \
 	else \
-	  lib=`pwd | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
+	  lib=`${PWD} | sed -e 's,^.*/\([^/][^/]*\)$$,\1,'`; \
 	  for dir in Makefile $(MULTIDIRS); do \
 	    if [ -f ../$${dir}/$${lib}/Makefile ]; then \
 	      if (cd ../$${dir}/$${lib}; $(MAKE) $(FLAGS_TO_PASS) $(DO)); \
@@ -545,10 +662,10 @@ if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
 
   if [ "${ml_verbose}" = --verbose ]; then
     echo "Running configure in multilib subdirs ${multidirs}"
-    echo "pwd: `pwd`"
+    echo "pwd: `${PWDCMD-pwd}`"
   fi
 
-  ml_origdir=`pwd`
+  ml_origdir=`${PWDCMD-pwd}`
   ml_libdir=`echo $ml_origdir | sed -e 's,^.*/,,'`
   # cd to top-level-build-dir/${with_target_subdir}
   cd ..
@@ -557,10 +674,27 @@ if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
 
     if [ "${ml_verbose}" = --verbose ]; then
       echo "Running configure in multilib subdir ${ml_dir}"
-      echo "pwd: `pwd`"
+      echo "pwd: `${PWDCMD-pwd}`"
     fi
 
-    if [ -d ${ml_dir} ]; then true; else mkdir ${ml_dir}; fi
+    if [ -d ${ml_dir} ]; then true; else
+      # ``mkdir -p ${ml_dir}'' See also mkinstalldirs.
+      pathcomp=""
+      for d in `echo ":${ml_dir}" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`; do
+        pathcomp="$pathcomp$d"
+        case "$pathcomp" in
+          -* ) pathcomp=./$pathcomp ;;
+        esac
+        if test ! -d "$pathcomp"; then
+           echo "mkdir $pathcomp" 1>&2
+           mkdir "$pathcomp" > /dev/null 2>&1 || lasterr=$?
+        fi
+        if test ! -d "$pathcomp"; then
+	   exit $lasterr
+        fi
+        pathcomp="$pathcomp/"
+      done
+    fi
     if [ -d ${ml_dir}/${ml_libdir} ]; then true; else mkdir ${ml_dir}/${ml_libdir}; fi
 
     # Eg: if ${ml_dir} = m68000/m68881, dotdot = ../../
@@ -568,7 +702,7 @@ if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
 
     case ${srcdir} in
     ".")
-      echo Building symlink tree in `pwd`/${ml_dir}/${ml_libdir}
+      echo Building symlink tree in `${PWDCMD-pwd}`/${ml_dir}/${ml_libdir}
       if [ "${with_target_subdir}" != "." ]; then
 	ml_unsubdir="../"
       else
@@ -576,6 +710,13 @@ if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
       fi
       (cd ${ml_dir}/${ml_libdir};
        ../${dotdot}${ml_unsubdir}symlink-tree ../${dotdot}${ml_unsubdir}${ml_libdir} "")
+      if [ -f ${ml_dir}/${ml_libdir}/Makefile ]; then
+	if [ x"${MAKE}" = x ]; then
+	  (cd ${ml_dir}/${ml_libdir}; make distclean)
+	else
+	  (cd ${ml_dir}/${ml_libdir}; ${MAKE} distclean)
+	fi
+      fi
       ml_newsrcdir="."
       ml_srcdiroption=
       multisrctop=${dotdot}
@@ -604,9 +745,86 @@ if [ -n "${multidirs}" ] && [ -z "${ml_norecursion}" ]; then
     cd ${ml_dir}/${ml_libdir}
 
     if [ -f ${ml_newsrcdir}/configure ]; then
-      ml_recprog=${ml_newsrcdir}/configure
+      ml_recprog="${ml_newsrcdir}/configure --cache-file=../config.cache"
     fi
-    if eval ${ml_config_shell} ${ml_recprog} \
+
+    # find compiler flag corresponding to ${ml_dir}
+    for i in `${CC-gcc} --print-multi-lib 2>/dev/null`; do 
+      dir=`echo $i | sed -e 's/;.*$//'`
+      if [ "${dir}" = "${ml_dir}" ]; then
+        flags=`echo $i | sed -e 's/^[^;]*;//' -e 's/@/ -/g'`
+        break
+      fi
+    done
+    ml_config_env='CC="${CC_}$flags" CXX="${CXX_}$flags"'
+
+    if [ "${with_target_subdir}" = "." ]; then
+	CC_=$CC' '
+	CXX_=$CXX' '
+    else
+	# Create a regular expression that matches any string as long
+	# as ML_POPDIR.
+	popdir_rx=`echo ${ML_POPDIR} | sed 's,.,.,g'`
+	CC_=
+	for arg in ${CC}; do
+	  case $arg in
+	  -[BIL]"${ML_POPDIR}"/*)
+	    CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\1/p"`' ' ;;
+	  "${ML_POPDIR}"/*)
+	    CC_="${CC_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+	  *)
+	    CC_="${CC_}${arg} " ;;
+	  esac
+	done
+
+	CXX_=
+	for arg in ${CXX}; do
+	  case $arg in
+	  -[BIL]"${ML_POPDIR}"/*)
+	    CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(-[BIL]${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X-[BIL]${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+	  "${ML_POPDIR}"/*)
+	    CXX_="${CXX_}"`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`' ' ;;
+	  *)
+	    CXX_="${CXX_}${arg} " ;;
+	  esac
+	done
+
+	if test "x${LD_LIBRARY_PATH+set}" = xset; then
+	  LD_LIBRARY_PATH_=
+	  for arg in `echo "$LD_LIBRARY_PATH" | tr ':' ' '`; do
+	    case "$arg" in
+	    "${ML_POPDIR}"/*)
+	      arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
+	      ;;
+	    esac
+	    if test "x$LD_LIBRARY_PATH_" != x; then
+	      LD_LIBRARY_PATH_=$LD_LIBRARY_PATH_:$arg
+	    else
+	      LD_LIBRARY_PATH_=$arg
+	    fi
+          done
+	  ml_config_env="$ml_config_env LD_LIBRARY_PATH=$LD_LIBRARY_PATH_"
+	fi
+
+	if test "x${SHLIB_PATH+set}" = xset; then
+	  SHLIB_PATH_=
+	  for arg in `echo "$SHLIB_PATH" | tr ':' ' '`; do
+	    case "$arg" in
+	    "${ML_POPDIR}"/*)
+	      arg=`echo "X${arg}" | sed -n "s/X\\(${popdir_rx}\\).*/\\1/p"`/${ml_dir}`echo "X${arg}" | sed -n "s/X${popdir_rx}\\(.*\\)/\\1/p"`
+	      ;;
+	    esac
+	    if test "x$SHLIB_PATH_" != x; then
+	      SHLIB_PATH_=$SHLIB_PATH_:$arg
+	    else
+	      SHLIB_PATH_=$arg
+	    fi
+          done
+	  ml_config_env="$ml_config_env SHLIB_PATH=$SHLIB_PATH_"
+	fi
+    fi
+
+    if eval ${ml_config_env} ${ml_config_shell} ${ml_recprog} \
 	--with-multisubdir=${ml_dir} --with-multisrctop=${multisrctop} \
 	${ml_arguments} ${ml_srcdiroption} ; then
       true