X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=configure;h=13384a42ba8df88899de3b1c42e270028c031530;hb=7a3ccebe9b1acd2e5bee53e3c462ac5a6627e89a;hp=b204110f118589fbc92d89afd85ffea108104299;hpb=e100816592fa5de82ca01c4becca48ab06fd6ff4;p=deliverable%2Fbinutils-gdb.git diff --git a/configure b/configure index b204110f11..13384a42ba 100755 --- a/configure +++ b/configure @@ -11,6 +11,8 @@ ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: +ac_help="$ac_help + --enable-libada Builds libada directory" ac_help="$ac_help --enable-serial-[{host,target,build}-]configure Force sequential configuration of @@ -577,7 +579,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:581: checking host system type" >&5 +echo "configure:583: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -598,7 +600,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:602: checking target system type" >&5 +echo "configure:604: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -616,7 +618,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:620: checking build system type" >&5 +echo "configure:622: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -671,7 +673,7 @@ test "$program_transform_name" = "" && program_transform_name="s,x,x," # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:675: checking for a BSD compatible install" >&5 +echo "configure:677: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -755,6 +757,18 @@ test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' # Like NCN_CHECK_TARGET_TOOL, but requires the prefix if build!=target. +### +# AC_PROG_CPP_WERROR +# Used for autoconf 2.5x to force AC_PREPROC_IFELSE to reject code which +# triggers warnings from the preprocessor. Will be in autoconf 2.58. +# For now, using this also overrides header checks to use only the +# preprocessor (matches 2.13 behavior; matching 2.58's behavior is a +# bit harder from here). +# Eventually autoconf will default to checking headers with the compiler +# instead, and we'll have to do this differently. + +# AC_PROG_CPP_WERROR + ### we might need to use some other shell than /bin/sh for running subshells ### If we are on Windows, search for the shell. This will permit people @@ -795,19 +809,13 @@ progname=$0 if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi # Export original configure arguments for use by sub-configures. These -# will be expanded once by make, and once by the shell, so they need to -# have '$' quoted for make, and then each argument quoted for the shell. -# What's more, the 'echo' below might expand backslashes. -cat <<\EOF_SED > conftestsed -s,\\,\\\\,g; s,\$,$$,g +# will be expanded by make, so quote '$'. +tmp="$progname $@" +sed -e 's,\$,$$,g' < conftestsed.out +$tmp EOF_SED -tmp="'$progname'" -for ac_arg -do - tmp="$tmp '"`echo "$ac_arg" | sed -f conftestsed` -done -rm -f conftestsed -TOPLEVEL_CONFIGURE_ARGUMENTS="$tmp" +TOPLEVEL_CONFIGURE_ARGUMENTS=`cat conftestsed.out` +rm -f conftestsed.out moveifchange=${srcdir}/move-if-change @@ -885,7 +893,8 @@ target_libraries="target-libiberty \ target-libstdc++-v3 \ target-libf2c \ ${libgcj} \ - target-libobjc" + target-libobjc \ + target-libada" # these tools are built using the target libraries, and are intended to # run only in the target environment @@ -1032,26 +1041,26 @@ case "${host}" in noconfigdirs="$noconfigdirs byacc" ;; i[3456789]86-*-vsta) - noconfigdirs="tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext" + noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext" ;; i[3456789]86-*-go32* | i[3456789]86-*-msdosdjgpp*) - noconfigdirs="tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi" + noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi" ;; i[3456789]86-*-mingw32*) # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv" - noconfigdirs="expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool" + noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool" ;; i[3456789]86-*-beos*) noconfigdirs="$noconfigdirs tk itcl tix libgui gdb" ;; *-*-cygwin*) - noconfigdirs="autoconf automake send-pr rcs guile perl" + noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl" ;; *-*-netbsd*) - noconfigdirs="rcs" + noconfigdirs="$noconfigdirs rcs" ;; ppc*-*-pe) - noconfigdirs="patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv" + noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv" ;; powerpc-*-beos*) noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline" @@ -1061,6 +1070,18 @@ case "${host}" in ;; esac +# Check whether --enable-libada or --disable-libada was given. +if test "${enable_libada+set}" = set; then + enableval="$enable_libada" + ENABLE_LIBADA=$enableval +else + ENABLE_LIBADA=yes +fi + +if test "${ENABLE_LIBADA}" != "yes" ; then + noconfigdirs="$noconfigdirs target-libada" +fi + # Save it here so that, even in case of --enable-libgcj, if the Java # front-end isn't enabled, we still get libgcj disabled. libgcj_saved=$libgcj @@ -1124,8 +1145,11 @@ case "${target}" in *) ;; esac ;; + *-*-uclinux*) + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}" + ;; *-*-vxworks*) - noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj}" ;; alpha*-dec-osf*) # ld works, but does not support shared libraries. @@ -1256,7 +1280,7 @@ case "${target}" in ;; ia64*-**-hpux*) # No gdb or ld support yet. - noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb ld" + noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld" ;; i[3456789]86-*-coff | i[3456789]86-*-elf) noconfigdirs="$noconfigdirs ${libgcj}" @@ -1355,7 +1379,7 @@ case "${target}" in ;; powerpc-*-aix*) # copied from rs6000-*-* entry - noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}" ;; powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe) target_configdirs="$target_configdirs target-winsup" @@ -1377,7 +1401,7 @@ case "${target}" in noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}" ;; rs6000-*-aix*) - noconfigdirs="$noconfigdirs gprof ${libgcj}" + noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}" ;; rs6000-*-*) noconfigdirs="$noconfigdirs gprof ${libgcj}" @@ -2002,7 +2026,7 @@ fi # Default to using --with-stabs for certain targets. if test x${with_stabs} = x ; then case "${target}" in - mips*-*-irix6*) + mips*-*-irix[56]*) ;; mips*-*-* | alpha*-*-osf*) with_stabs=yes; @@ -2516,7 +2540,14 @@ serialization_dependencies=serdep.tmp # Base args. Strip norecursion, cache-file, srcdir, host, build, # target and nonopt. These are the ones we might not want to pass -# down to subconfigures. +# down to subconfigures. Also strip program-prefix, program-suffix, +# and program-transform-name, so that we can pass down a consistent +# program-transform-name. If autoconf has put single quotes around +# any of these arguments (because they contain shell metacharacters) +# then this will fail; in practice this only happens for +# --program-transform-name, so be sure to override --program-transform-name +# at the end of the argument list. +# These will be expanded by make, so quote '$'. cat <<\EOF_SED > conftestsed s/ --no[^ ]* / / s/ --c[a-z-]*[= ][^ ]* / / @@ -2524,17 +2555,38 @@ s/ --sr[a-z-]*[= ][^ ]* / / s/ --ho[a-z-]*[= ][^ ]* / / s/ --bu[a-z-]*[= ][^ ]* / / s/ --t[a-z-]*[= ][^ ]* / / +s/ --program-[pst][a-z-]*[= ][^ ]* / / s/ -cache-file[= ][^ ]* / / s/ -srcdir[= ][^ ]* / / s/ -host[= ][^ ]* / / s/ -build[= ][^ ]* / / s/ -target[= ][^ ]* / / +s/ -program-prefix[= ][^ ]* / / +s/ -program-suffix[= ][^ ]* / / +s/ -program-transform-name[= ][^ ]* / / s/ [^' -][^ ]* / / s/^ *//;s/ *$// -s,\\,\\\\,g; s,\$,$$,g +s,\$,$$,g +EOF_SED +sed -f conftestsed < conftestsed.out + ${ac_configure_args} +EOF_SED +baseargs=`cat conftestsed.out` +rm -f conftestsed conftestsed.out + +# Add in --program-transform-name, after --program-prefix and +# --program-suffix have been applied to it. Autoconf has already +# doubled dollar signs and backslashes in program_transform_name; we want +# the backslashes un-doubled, and then the entire thing wrapped in single +# quotes, because this will be expanded first by make and then by the shell. +# Also, because we want to override the logic in subdir configure scripts to +# choose program_transform_name, replace any s,x,x, with s,y,y,. +sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" < conftestsed.out +${program_transform_name} EOF_SED -baseargs=`echo " ${ac_configure_args} " | sed -f conftestsed` -rm -f conftestsed +gcc_transform_name=`cat conftestsed.out` +rm -f conftestsed.out +baseargs="$baseargs --program-transform-name='${gcc_transform_name}'" # For the build-side libraries, we just need to pretend we're native, # and not use the same cache file. Multilibs are neither needed nor @@ -2551,7 +2603,9 @@ case "${cache_file}" in cache_file_option="--cache-file=../${cache_file}" ;; esac -host_configargs="${cache_file_option} --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}" +# Host dirs don't like to share a cache file either, horribly enough. +# This seems to be due to autoconf 2.5x stupidity. +host_configargs="--cache-file=./config.cache --build=${build_alias} --host=${host_alias} --target=${target_alias} ${extra_host_args} ${baseargs}" target_configargs=${baseargs} @@ -2575,8 +2629,17 @@ if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib target_configargs="--with-newlib ${target_configargs}" fi +# Different target subdirs use different values of certain variables +# (notably CXX). Worse, multilibs use *lots* of different values. +# Worse yet, autoconf 2.5x makes some of these 'precious', meaning that +# it doesn't automatically accept command-line overrides of them. +# This means it's not safe for target subdirs to share a cache file, +# which is disgusting, but there you have it. Hopefully this can be +# fixed in future. It's still worthwhile to use a cache file for each +# directory. I think. + # Pass the appropriate --host, --build, and --cache-file arguments. -target_configargs="--cache-file=../config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}" +target_configargs="--cache-file=./config.cache --host=${target_alias} --build=${build_alias} ${target_configargs}" # provide a proper gxx_include_dir. # Note, if you change the default, make sure to fix both here and in @@ -2647,6 +2710,10 @@ case " $target_configdirs " in ;; esac +# Allow the user to override the flags for +# our build compiler if desired. +CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}} + # On Canadian crosses, we'll be searching the right directories for # the previously-installed cross compiler, so don't bother to add # flags for directories within the install tree of the compiler @@ -2686,7 +2753,7 @@ GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)' # Don't use libstdc++-v3's flags to configure/build itself. libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' -raw_libstdcxx_flags=' -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' +raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' if test "x${CXX_FOR_TARGET+set}" = xset; then if test "x${RAW_CXX_FOR_TARGET+set}" != xset; then @@ -2785,7 +2852,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias- # Extract the first word of "${ncn_tool_prefix}ar", so it can be a program name with args. set dummy ${ncn_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2789: checking for $ac_word" >&5 +echo "configure:2856: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2818,7 +2885,7 @@ if test -z "$ac_cv_prog_AR" ; then # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2822: checking for $ac_word" >&5 +echo "configure:2889: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2857,7 +2924,7 @@ fi # Extract the first word of "${ncn_tool_prefix}as", so it can be a program name with args. set dummy ${ncn_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2861: checking for $ac_word" >&5 +echo "configure:2928: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2890,7 +2957,7 @@ if test -z "$ac_cv_prog_AS" ; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2894: checking for $ac_word" >&5 +echo "configure:2961: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2929,7 +2996,7 @@ fi # Extract the first word of "${ncn_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ncn_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2933: checking for $ac_word" >&5 +echo "configure:3000: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2962,7 +3029,7 @@ if test -z "$ac_cv_prog_DLLTOOL" ; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2966: checking for $ac_word" >&5 +echo "configure:3033: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3001,7 +3068,7 @@ fi # Extract the first word of "${ncn_tool_prefix}ld", so it can be a program name with args. set dummy ${ncn_tool_prefix}ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3005: checking for $ac_word" >&5 +echo "configure:3072: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3034,7 +3101,7 @@ if test -z "$ac_cv_prog_LD" ; then # Extract the first word of "ld", so it can be a program name with args. set dummy ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3038: checking for $ac_word" >&5 +echo "configure:3105: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3073,7 +3140,7 @@ fi # Extract the first word of "${ncn_tool_prefix}nm", so it can be a program name with args. set dummy ${ncn_tool_prefix}nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3077: checking for $ac_word" >&5 +echo "configure:3144: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3106,7 +3173,7 @@ if test -z "$ac_cv_prog_NM" ; then # Extract the first word of "nm", so it can be a program name with args. set dummy nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3110: checking for $ac_word" >&5 +echo "configure:3177: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3145,7 +3212,7 @@ fi # Extract the first word of "${ncn_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ncn_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3149: checking for $ac_word" >&5 +echo "configure:3216: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3178,7 +3245,7 @@ if test -z "$ac_cv_prog_RANLIB" ; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3182: checking for $ac_word" >&5 +echo "configure:3249: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3217,7 +3284,7 @@ fi # Extract the first word of "${ncn_tool_prefix}windres", so it can be a program name with args. set dummy ${ncn_tool_prefix}windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3221: checking for $ac_word" >&5 +echo "configure:3288: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3250,7 +3317,7 @@ if test -z "$ac_cv_prog_WINDRES" ; then # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3254: checking for $ac_word" >&5 +echo "configure:3321: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3289,7 +3356,7 @@ fi # Extract the first word of "${ncn_tool_prefix}objcopy", so it can be a program name with args. set dummy ${ncn_tool_prefix}objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3293: checking for $ac_word" >&5 +echo "configure:3360: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3322,7 +3389,7 @@ if test -z "$ac_cv_prog_OBJCOPY" ; then # Extract the first word of "objcopy", so it can be a program name with args. set dummy objcopy; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3326: checking for $ac_word" >&5 +echo "configure:3393: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3361,7 +3428,7 @@ fi # Extract the first word of "${ncn_tool_prefix}objdump", so it can be a program name with args. set dummy ${ncn_tool_prefix}objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3365: checking for $ac_word" >&5 +echo "configure:3432: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3394,7 +3461,7 @@ if test -z "$ac_cv_prog_OBJDUMP" ; then # Extract the first word of "objdump", so it can be a program name with args. set dummy objdump; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3398: checking for $ac_word" >&5 +echo "configure:3465: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3437,12 +3504,13 @@ fi + # Target tools. if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}ar", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3446: checking for $ac_word" >&5 +echo "configure:3514: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3475,7 +3543,7 @@ if test -z "$ac_cv_prog_AR_FOR_TARGET" ; then # Extract the first word of "ar", so it can be a program name with args. set dummy ar; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3479: checking for $ac_word" >&5 +echo "configure:3547: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3514,7 +3582,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}as", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3518: checking for $ac_word" >&5 +echo "configure:3586: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3547,7 +3615,7 @@ if test -z "$ac_cv_prog_AS_FOR_TARGET" ; then # Extract the first word of "as", so it can be a program name with args. set dummy as; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3551: checking for $ac_word" >&5 +echo "configure:3619: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3586,7 +3654,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}dlltool", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3590: checking for $ac_word" >&5 +echo "configure:3658: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3619,7 +3687,7 @@ if test -z "$ac_cv_prog_DLLTOOL_FOR_TARGET" ; then # Extract the first word of "dlltool", so it can be a program name with args. set dummy dlltool; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3623: checking for $ac_word" >&5 +echo "configure:3691: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3658,7 +3726,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}ld", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3662: checking for $ac_word" >&5 +echo "configure:3730: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3691,7 +3759,7 @@ if test -z "$ac_cv_prog_LD_FOR_TARGET" ; then # Extract the first word of "ld", so it can be a program name with args. set dummy ld; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3695: checking for $ac_word" >&5 +echo "configure:3763: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3730,7 +3798,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}nm", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3734: checking for $ac_word" >&5 +echo "configure:3802: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3763,7 +3831,7 @@ if test -z "$ac_cv_prog_NM_FOR_TARGET" ; then # Extract the first word of "nm", so it can be a program name with args. set dummy nm; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3767: checking for $ac_word" >&5 +echo "configure:3835: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3802,7 +3870,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}ranlib", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3806: checking for $ac_word" >&5 +echo "configure:3874: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3835,7 +3903,7 @@ if test -z "$ac_cv_prog_RANLIB_FOR_TARGET" ; then # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3839: checking for $ac_word" >&5 +echo "configure:3907: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3874,7 +3942,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}windres", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3878: checking for $ac_word" >&5 +echo "configure:3946: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3907,7 +3975,7 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then # Extract the first word of "windres", so it can be a program name with args. set dummy windres; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3911: checking for $ac_word" >&5 +echo "configure:3979: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_ncn_cv_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3974,7 +4042,7 @@ RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target} NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target} echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:3978: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4046: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -4219,6 +4287,7 @@ s%@OBJDUMP@%$OBJDUMP%g s%@ncn_cv_OBJDUMP@%$ncn_cv_OBJDUMP%g s%@CC@%$CC%g s%@CXX@%$CXX%g +s%@CFLAGS_FOR_BUILD@%$CFLAGS_FOR_BUILD%g s%@DEFAULT_YACC@%$DEFAULT_YACC%g s%@DEFAULT_LEX@%$DEFAULT_LEX%g s%@DEFAULT_M4@%$DEFAULT_M4%g