X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=configure.ac;h=e6e91254c41e216b7138cc62d35bd43880e17e99;hb=e5c05065031f61b07a9d7ba1ffe20059635e3c6e;hp=1cb61ca39de53531c09b966088ff9c62ba142f3f;hpb=782cb41f0e8e6b01c1ecccb3be1693ff29824d59;p=deliverable%2Fbinutils-gdb.git

diff --git a/configure.ac b/configure.ac
index 1cb61ca39d..e6e91254c4 100644
--- a/configure.ac
+++ b/configure.ac
@@ -89,42 +89,6 @@ AC_PROG_LN_S
 AC_PROG_SED
 AC_PROG_AWK
 
-### we might need to use some other shell than /bin/sh for running subshells
-### If we are on Windows, search for the shell.  This will permit people
-### to not have /bin/sh, but to be able to see /SOME/PATH/sh configure
-### without also having to set CONFIG_SHELL.  This code will work when
-### using bash, which sets OSTYPE.
-case "${OSTYPE}" in
-*win32*)
-  if test x${CONFIG_SHELL} = x ; then
-    if test ! -f /bin/sh ; then
-      if test x${SHELL} != x && test -f ${SHELL} ; then
-	CONFIG_SHELL=${SHELL}
-	export CONFIG_SHELL
-      else
-	for prog in sh sh.exe bash bash.exe; do
-	  IFS="${IFS=	}"; save_ifs="$IFS"; IFS="${IFS}:"
-	  for dir in $PATH; do
-	    test -z "$dir" && dir=.
-	    if test -f $dir/$prog; then
-	      CONFIG_SHELL=$dir/$prog
-	      export CONFIG_SHELL
-	      break
-	    fi
-	  done
-	  IFS="$save_ifs"
-	  test -n "${CONFIG_SHELL}" && break
-	done
-      fi
-    fi
-  fi
-  ;;
-esac
-
-config_shell=${CONFIG_SHELL-/bin/sh}
-
-moveifchange=${srcdir}/move-if-change
-
 srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
 
 # We pass INSTALL explicitly to sub-makes.  Make sure that it is not
@@ -207,10 +171,9 @@ target_libraries="target-libgcc \
 # run only in the target environment
 #
 # note: any program that *uses* libraries that are in the "target_libraries"
-# list belongs in this list.  those programs are also very likely
-# candidates for the "native_only" list which follows
+# list belongs in this list.
 #
-target_tools="target-examples target-groff target-gperf target-rda"
+target_tools="target-examples target-gperf target-rda"
 
 ################################################################################
 
@@ -296,17 +259,12 @@ case ${with_x} in
   *)  echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;;
 esac
 
-# Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.  
-native_only="autoconf automake libtool fileutils find gawk gettext gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff target-groff guile perl time ash bash bzip2 prms gnuserv target-gperf"
-
-# Similarly, some are only suitable for cross toolchains.
+# Some are only suitable for cross toolchains.
 # Remove these if host=target.
 cross_only="target-libgloss target-newlib target-opcodes"
 
 case $is_cross_compiler in
   no) skipdirs="${skipdirs} ${cross_only}" ;;
-  yes) skipdirs="${skipdirs} ${native_only}" ;;
 esac
 
 # If both --with-headers and --with-libs are specified, default to
@@ -355,7 +313,8 @@ case "${ENABLE_GOLD}" in
     case "${target}" in
       *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \
       | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \
-      | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-solaris2* | *-*-nto*)
+      | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \
+      | *-*-solaris2* | *-*-nto*)
         case "${target}" in
           *-*-linux*aout* | *-*-linux*oldld*)
             ;;
@@ -426,36 +385,8 @@ unsupported_languages=
 # exist yet.
 
 case "${host}" in
-  hppa*64*-*-*)
-    noconfigdirs="$noconfigdirs byacc"
-    ;;
-  i[[3456789]]86-*-vsta)
-    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
-    ;;
-  i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
-    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
-    ;;
-  x86_64-*-mingw*)
-    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
-    ;;
-  i[[3456789]]86-*-mingw32*)
-    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
-    noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool newlib"
-    ;;
-  i[[3456789]]86-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl libgui gdb"
-    ;;
-  *-*-cygwin*)
-    noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
-    ;;
-  *-*-netbsd*)
-    noconfigdirs="$noconfigdirs rcs"
-    ;;
-  ppc*-*-pe)
-    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
-    ;;
-  powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
+  i[[3456789]]86-*-msdosdjgpp*)
+    noconfigdirs="$noconfigdirs tcl tk itcl"
     ;;
 esac
 
@@ -537,9 +468,9 @@ if test x$enable_libgomp = x ; then
     case "${target}" in
     *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
 	;;
-    *-*-netbsd* | *-*-freebsd* | *-*-openbsd*)
+    *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*)
 	;;
-    *-*-solaris2* | *-*-sysv4* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
+    *-*-solaris2* | *-*-irix6* | *-*-osf* | *-*-hpux11*)
 	;;
     *-*-darwin* | *-*-aix*)
 	;;
@@ -549,12 +480,91 @@ if test x$enable_libgomp = x ; then
     esac
 fi
 
+# Disable libssp for some systems.
+case "${target}" in
+  avr-*-*)
+    # No hosted I/O support.
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
+  powerpc-*-aix* | rs6000-*-aix*)
+    noconfigdirs="$noconfigdirs target-libssp"
+    ;;
+esac
+
+# Disable target libiberty for some systems.
+case "${target}" in
+  *-*-kaos*)
+    # Remove unsupported stuff on all kaOS configurations.
+    skipdirs="target-libiberty"
+    ;;
+  *-*-netbsd*)
+    # Skip some stuff on all NetBSD configurations.
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  *-*-netware*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  *-*-rtems*)
+    skipdirs="${skipdirs} target-libiberty"
+    ;;
+  *-*-tpf*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  *-*-vxworks*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  sh*-*-pe|mips*-*-pe|*arm-wince-pe)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  arm*-*-symbianelf*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  avr-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  picochip-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+  mips*-sde-elf*)
+    skipdirs="$skipdirs target-libiberty"
+    ;;
+  ip2k-*-*)
+    noconfigdirs="$noconfigdirs target-libiberty"
+    ;;
+esac
+
+# Disable libstdc++-v3 for some systems.
+case "${target}" in
+  *-*-vxworks*)
+    # VxWorks uses the Dinkumware C++ library.
+    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    ;;
+  arm*-wince-pe*)
+    # the C++ libraries don't build on top of CE's C libraries
+    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    ;;
+  avr-*-*)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3"
+    ;;
+esac
+
+# Disable Fortran for some systems.
+case "${target}" in
+  mmix-*-*)
+    # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>.
+    unsupported_languages="$unsupported_languages fortran"
+    ;;
+esac
+
 # Default libgloss CPU subdirectory.
 libgloss_dir="$target_cpu"
 
 case "${target}" in
   *-*-chorusos)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs ld gas gdb gprof"
@@ -573,8 +583,8 @@ case "${target}" in
     noconfigdirs="$noconfigdirs sim target-rda"
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
+  *-*-dragonfly*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-freebsd*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
@@ -595,14 +605,11 @@ case "${target}" in
     ;;
   *-*-kaos*)
     # Remove unsupported stuff on all kaOS configurations.
-    skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
-    skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
-    skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   *-*-netbsd*)
     # Skip some stuff on all NetBSD configurations.
-    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
 
     # Skip some stuff that's unsupported on some NetBSD configurations.
     case "${target}" in
@@ -614,27 +621,26 @@ case "${target}" in
     esac
     ;;
   *-*-netware*)
-    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   *-*-rtems*)
-    skipdirs="${skipdirs} target-libiberty"
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
     # The tpf target doesn't support gdb yet.
   *-*-tpf*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty ${libgcj} target-libmudflap gdb tcl tk libgui itcl"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj} gdb tcl tk libgui itcl"
     ;;
   *-*-uclinux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
     ;;
   *-*-vxworks*)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss target-libiberty target-libstdc++-v3 ${libgcj}"
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   alpha*-dec-osf*)
     # ld works, but does not support shared libraries.
-    # newlib is not 64 bit ready.  I'm not sure about fileutils.
+    # newlib is not 64 bit ready.
     # gas doesn't generate exception information.
-    noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
+    noconfigdirs="$noconfigdirs gas ld target-newlib target-libgloss"
     ;;
   alpha*-*-*vms*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
@@ -655,74 +661,48 @@ case "${target}" in
     ;;    
   sh*-*-pe|mips*-*-pe|*arm-wince-pe)
     noconfigdirs="$noconfigdirs ${libgcj}"
-    noconfigdirs="$noconfigdirs target-examples"
-    noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
     noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
-    noconfigdirs="$noconfigdirs expect dejagnu"
-    # the C++ libraries don't build on top of CE's C libraries
-    noconfigdirs="$noconfigdirs target-libstdc++-v3"
     noconfigdirs="$noconfigdirs target-newlib"
-    case "${host}" in
-      *-*-cygwin*) ;; # keep gdb and readline
-      *) noconfigdirs="$noconfigdirs gdb readline"
-	 ;;
-    esac
     libgloss_dir=wince
     ;;
   arc-*-*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-  arm-semi-aof )
-    ;;
-  arm-*-coff | strongarm-*-coff | xscale-*-coff)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+  arm-*-coff)
     libgloss_dir=arm
     ;;
-  arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
-    noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+  arm-*-elf* | arm*-*-eabi* )
+    noconfigdirs="$noconfigdirs target-libffi"
     libgloss_dir=arm
     ;;
   arm*-*-linux-gnueabi)
-    noconfigdirs="$noconfigdirs target-qthreads"
     case ${with_newlib} in
       no) noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     esac
     libgloss_dir=arm
     ;;
   arm*-*-symbianelf*)
-    noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     libgloss_dir=arm
     ;;
   arm-*-pe*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
-  thumb-*-coff)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
-  thumb-*-elf)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
-  thumb-*-pe)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    ;;
   arm-*-riscix*)
-    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld target-libgloss"
     ;;
   avr-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj} target-libssp"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   bfin-*-*)
     unsupported_languages="$unsupported_languages java"
     noconfigdirs="$noconfigdirs target-boehm-gc"
-    if test x${is_cross_compiler} != xno ; then
-      target_configdirs="${target_configdirs} target-bsp target-cygmon"
-    fi
     ;;
   c4x-*-* | tic4x-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
-  c54x*-*-* | tic54x-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} gcc gdb newlib"
+  tic54x-*-*)
+    noconfigdirs="$noconfigdirs target-libgloss gdb"
     ;;
   cr16-*-*)
     noconfigdirs="$noconfigdirs ${libgcj} gdb"
@@ -730,29 +710,18 @@ case "${target}" in
   cris-*-* | crisv32-*-*)
     unsupported_languages="$unsupported_languages java"
     case "${target}" in
-      *-*-aout)
-	unsupported_languages="$unsupported_languages fortran"
-	noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
-      *-*-elf) # See PR46792 regarding target-libffi.
-	noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
       *-*-linux*)
 	noconfigdirs="$noconfigdirs target-newlib target-libgloss";;
-      *)
-	unsupported_languages="$unsupported_languages fortran"
-	noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss";;
+      *) # See PR46792 regarding target-libffi.
+	noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";;
     esac
     libgloss_dir=cris
     ;;
-  crx-*-*)
-    ;;
   d10v-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   d30v-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb"
-    ;;
-  ep9312-*-elf | ep9312-*-coff)
-    libgloss_dir=arm
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   fr30-*-elf*)
     noconfigdirs="$noconfigdirs ${libgcj} gdb"
@@ -768,17 +737,17 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   h8500-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   hppa1.1-*-osf* | hppa1.1-*-bsd* )
     ;;
-  hppa*64*-*-linux* | parisc*64*-*-linux*)
+  hppa*64*-*-linux*)
     # In this case, it's because the hppa64-linux target is for
     # the kernel only at this point and has no libc, and thus no
     # headers, crt*.o, etc., all of which are needed by these.
     noconfigdirs="$noconfigdirs target-zlib"
     ;;
-  parisc*-*-linux* | hppa*-*-linux*)
+  hppa*-*-linux*)
     ;;
   hppa*-*-*elf* | \
   hppa*-*-lites* | \
@@ -787,7 +756,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   hppa*-hp-hpux11*)
-    noconfigdirs="$noconfigdirs ld shellutils"
+    noconfigdirs="$noconfigdirs ld"
     ;;
   hppa*-*-pro*)
     libgloss_dir=pa
@@ -795,14 +764,14 @@ case "${target}" in
   hppa*-*-*)
     # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't
     # build on HP-UX 10.20.
-    noconfigdirs="$noconfigdirs ld shellutils ${libgcj}"
+    noconfigdirs="$noconfigdirs ld ${libgcj}"
     ;;
   i960-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj} gdb"
+    noconfigdirs="$noconfigdirs gdb"
     ;;
   ia64*-*-elf*)
     # No gdb support yet.
-    noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
+    noconfigdirs="$noconfigdirs readline libgui itcl gdb"
     ;;
   ia64*-**-hpux*)
     # No ld support yet.
@@ -810,22 +779,13 @@ case "${target}" in
     ;;
   ia64*-*-*vms*)
     # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
-    ;;
-  i370-*-opened*)
+    noconfigdirs="$noconfigdirs ${libgcj} readline libgui itcl gdb ld"
     ;;
   i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
     noconfigdirs="$noconfigdirs ${libgcj}"
     libgloss_dir=i386
     ;;
   i[[3456789]]86-*-linux*)
-    # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
-    # not build java stuff by default.
-    case "${target}" in
-      *-*-*libc1*)
-	noconfigdirs="$noconfigdirs ${libgcj}";;
-    esac
-
     # This section makes it possible to build newlib natively on linux.
     # If we are using a cross compiler then don't configure newlib.
     if test x${is_cross_compiler} != xno ; then
@@ -838,18 +798,18 @@ case "${target}" in
     # 'target-newlib' will appear in skipdirs.
     ;;
   i[[3456789]]86-w64-mingw*)
-    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
     ;;
   i[[3456789]]86-*-mingw*)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
     ;;
   x86_64-*-mingw*)
-    noconfigdirs="$noconfigdirs expect target-libgloss target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss target-newlib ${libgcj}"
     ;;
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss"
+    noconfigdirs="$noconfigdirs target-libgloss"
     # always build newlib if winsup directory is present.
     if test -d "$srcdir/winsup/cygwin"; then
       skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
@@ -857,8 +817,7 @@ case "${target}" in
       echo "Warning: winsup/cygwin is missing so newlib can't be built."
     fi
     ;;
-  i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
-  i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
+  i[[3456789]]86-*-interix* )
     ;;
   i[[3456789]]86-*-pe)
     noconfigdirs="$noconfigdirs target-libgloss"
@@ -866,19 +825,19 @@ case "${target}" in
   i[[3456789]]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
     # and is not configured to handle mixed ELF and COFF.
-    noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld target-libgloss"
     ;;
   i[[3456789]]86-*-sco*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   i[[3456789]]86-*-solaris2*)
     noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[[3456789]]86-*-sysv4*)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libgloss"
     ;;
   i[[3456789]]86-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     ;;
   i[[3456789]]86-*-rdos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
@@ -887,53 +846,38 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty"
     libgloss_dir=m68hc11
     ;;
   m68k-*-elf*)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  m68k-*-coff*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
   m68*-*-* | fido-*-*)
     libgloss_dir=m68k
     ;;
-  mcore-*-pe*)
-    ;;
   mmix-*-*)
-    noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb libgloss"
-    unsupported_languages="$unsupported_languages fortran java"
-    ;;
-  mn10200-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  mn10300-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libffi target-boehm-gc gdb"
+    unsupported_languages="$unsupported_languages java"
     ;;
   mt-*-*)
     noconfigdirs="$noconfigdirs sim"
     ;;
-  picochip-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty"
-    ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
     ;;
-  powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
+  powerpc*-*-winnt* | powerpc*-*-pe*)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl"
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
     ;;
     # This is temporary until we can link against shared libraries
   powerpcle-*-solaris*)
-    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb sim tcl tk itcl"
     libgloss_dir=rs6000
     ;;
   powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     ;;
   powerpc-*-eabi)
     noconfigdirs="$noconfigdirs ${libgcj}"
@@ -946,19 +890,18 @@ case "${target}" in
     noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss target-libssp target-newlib ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss target-newlib ${libgcj}"
     ;;
   rs6000-*-*)
     noconfigdirs="$noconfigdirs gprof ${libgcj}"
     ;;
   m68k-apollo-*)
-    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss"
     ;;
   microblaze*)
-    noconfigdirs="$noconfigdirs gprof target-libssp ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof ${libgcj}"
     ;;
   mips*-sde-elf*)
-    skipdirs="$skipdirs target-libiberty"
     noconfigdirs="$noconfigdirs ${libgcj}"
     if test x$with_newlib = xyes; then
       noconfigdirs="$noconfigdirs gprof"
@@ -966,7 +909,7 @@ case "${target}" in
     libgloss_dir=mips
     ;;
   mips*-*-irix5*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   mips*-*-irix6*)
     # Linking libjava exceeds command-line length limits on at least
@@ -976,7 +919,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   mips*-*-bsd*)
-    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss"
     ;;
   mips*-*-linux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
@@ -985,16 +928,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gprof ${libgcj}"
     libgloss_dir=mips
     ;;
-  romp-*-*)
-    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes target-libgloss ${libgcj}"
-    ;;
   sh-*-* | sh64-*-*)
-    case "${host}" in
-      i[[3456789]]86-*-vsta) ;; # don't add gprof back in
-      i[[3456789]]86-*-go32*) ;; # don't add gprof back in
-      i[[3456789]]86-*-msdosdjgpp*) ;; # don't add gprof back in
-      *) skipdirs=`echo " ${skipdirs} " | sed -e 's/ gprof / /'` ;;
-    esac
     case "${target}" in
       sh*-*-elf)
          noconfigdirs="$noconfigdirs ${libgcj}" ;;
@@ -1013,43 +947,26 @@ case "${target}" in
     libgloss_dir=sparc
     ;;
   sparclite-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
     libgloss_dir=sparc
     ;;
   sparc-*-sunos4*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
     if test x${is_cross_compiler} != xno ; then
            noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss"
     else
            use_gnu_ld=no
     fi
     ;;
-  sparc-*-solaris2.[[0-6]] | sparc-*-solaris2.[[0-6]].*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
   sparc-*-solaris* | sparc64-*-solaris* | sparcv9-*-solaris*)
     ;;
   tic6x-*-*)
     noconfigdirs="$noconfigdirs gdb sim ${libgcj}"
     ;;
   v810-*-*)
-    noconfigdirs="$noconfigdirs bfd binutils gas gcc gdb ld target-libstdc++-v3 opcodes target-libgloss ${libgcj}"
-    ;;
-  v850*-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  vax-*-vms)
-    noconfigdirs="$noconfigdirs bfd binutils gdb ld target-newlib opcodes target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss"
     ;;
   vax-*-*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
-  xtensa*-*-*)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  ip2k-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
-    ;;
   *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
@@ -1069,111 +986,9 @@ case "${noconfigdirs}" in
 esac
 
 # Work in distributions that contain no compiler tools, like Autoconf.
-tentative_cc=""
 host_makefile_frag=/dev/null
 if test -d ${srcdir}/config ; then
 case "${host}" in
-  m68k-hp-hpux*)
-    # Avoid "too much defining" errors from HPUX compiler.
-    tentative_cc="cc -Wp,-H256000"
-    # If "ar" in $PATH is GNU ar, the symbol table may need rebuilding.
-    # If it's HP/UX ar, this should be harmless.
-    RANLIB="ar ts"
-    ;;
-  m68k-apollo-sysv*)
-    tentative_cc="cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DUSG"
-    ;;
-  m68k-apollo-bsd*)
-    #None of the Apollo compilers can compile gas or binutils.  The preprocessor
-    # chokes on bfd, the compiler won't let you assign integers to enums, and
-    # other problems.  Defining CC to gcc is a questionable way to say "don't use
-    # the apollo compiler" (the preferred version of GCC could be called cc,
-    # or whatever), but I'm not sure leaving CC as cc is any better...
-    #CC=cc -A ansi -A runtype,any -A systype,any -U__STDC__ -DNO_STDARG
-    # Used to have BISON=yacc.
-    tentative_cc=gcc
-    ;;
-  m88k-dg-dgux*)
-    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
-    ;;
-  m88k-harris-cxux*)
-    # Under CX/UX, we want to tell the compiler to use ANSI mode.
-    tentative_cc="cc -Xa"
-    host_makefile_frag="config/mh-cxux"
-    ;;
-  m88k-motorola-sysv*)
-    ;;
-  mips*-dec-ultrix*)
-    tentative_cc="cc -Wf,-XNg1000"
-    host_makefile_frag="config/mh-decstation"
-    ;;
-  mips*-nec-sysv4*)
-    # The C compiler on NEC MIPS SVR4 needs bigger tables.
-    tentative_cc="cc -ZXNd=5000 -ZXNg=1000"
-    host_makefile_frag="config/mh-necv4"
-    ;;
-  mips*-sgi-irix4*)
-    # Tell compiler to use K&R C.  We can't compile under the SGI Ansi
-    # environment.  Also bump switch table size so that cp-parse will
-    # compile.  Bump string length limit so linker builds.
-    tentative_cc="cc -cckr -Wf,-XNg1500 -Wf,-XNk1000 -Wf,-XNh2000 -Wf,-XNl8192"
-    ;;
-  mips*-*-sysv4*)
-    host_makefile_frag="config/mh-sysv4"
-    ;;
-  mips*-*-sysv*)
-    # This is for a MIPS running RISC/os 4.52C.
-
-    # This is needed for GDB, but needs to be in the top-level make because
-    # if a library is compiled with the bsd headers and gets linked with the
-    # sysv system libraries all hell can break loose (e.g. a jmp_buf might be
-    # a different size).
-    # ptrace(2) apparently has problems in the BSD environment.  No workaround is
-    # known except to select the sysv environment.  Could we use /proc instead?
-    # These "sysv environments" and "bsd environments" often end up being a pain.
-    #
-    # This is not part of CFLAGS because perhaps not all C compilers have this
-    # option.
-    tentative_cc="cc -systype sysv"
-    ;;
-  i370-ibm-opened*)
-    tentative_cc="c89"
-    ;;
-  i[[3456789]]86-*-sysv5*)
-    host_makefile_frag="config/mh-sysv5"
-    ;;
-  i[[3456789]]86-*-dgux*)
-    tentative_cc="gcc -Wall -ansi -D__using_DGUX"
-    host_makefile_frag="config/mh-dgux386"
-    ;;
-  i[[3456789]]86-ncr-sysv4.3*)
-    # The MetaWare compiler will generate a copyright message unless you
-    # turn it off by adding the -Hnocopyr flag.
-    tentative_cc="cc -Hnocopyr"
-    ;;
-  i[[3456789]]86-ncr-sysv4*)
-    # for an NCR 3000 (i486/SVR4) system.
-    # The NCR 3000 ships with a MetaWare compiler installed as /bin/cc.
-    # This compiler not only emits obnoxious copyright messages every time
-    # you run it, but it chokes and dies on a whole bunch of GNU source
-    # files.  Default to using the AT&T compiler installed in /usr/ccs/ATT/cc.
-    tentative_cc="/usr/ccs/ATT/cc"
-    host_makefile_frag="config/mh-ncr3000"
-    ;;
-  i[[3456789]]86-*-sco3.2v5*)
-    ;;
-  i[[3456789]]86-*-sco*)
-    # The native C compiler botches some simple uses of const.  Unfortunately,
-    # it doesn't defined anything like "__sco__" for us to test for in ansidecl.h.
-    tentative_cc="cc -Dconst="
-    host_makefile_frag="config/mh-sco"
-    ;;
-  i[[3456789]]86-*-udk*)
-    host_makefile_frag="config/mh-sysv5"
-    ;;
-  i[[3456789]]86-*-solaris2*)
-    host_makefile_frag="config/mh-sysv4"
-    ;;
   i[[3456789]]86-*-msdosdjgpp*)
     host_makefile_frag="config/mh-djgpp"
     ;;
@@ -1187,37 +1002,15 @@ case "${host}" in
   *-interix*)
     host_makefile_frag="config/mh-interix"
     ;;
-  vax-*-ultrix2*)
-    # The old BSD pcc isn't up to compiling parts of gdb so use gcc
-    tentative_cc=gcc
-    ;;
-  *-*-solaris2*)
-    host_makefile_frag="config/mh-solaris"
-    ;;
-  m68k-sun-sunos*)
-    # Sun's C compiler needs the -J flag to be able to compile cp-parse.c
-    # without overflowing the jump tables (-J says to use a 32 bit table)
-    tentative_cc="cc -J"
-    ;;
   hppa*-hp-hpux10*)
-    tentative_cc="cc -Wp,-H256000"
     host_makefile_frag="config/mh-pa-hpux10"
     ;;
-  hppa*-hp-hpux* | hppa*-*-hiux*)
-    tentative_cc="cc -Wp,-H256000"
+  hppa*-hp-hpux*)
     host_makefile_frag="config/mh-pa"
     ;;
   hppa*-*)	
     host_makefile_frag="config/mh-pa"
     ;;
-  *-hp-hpux* | *-*-hiux*)
-    tentative_cc="cc -Wp,-H256000"
-    ;;
-  rs6000-*-lynxos*)
-    # /bin/cc is less than useful for our purposes.  Always use GCC
-    tentative_cc="/usr/cygnus/progressive/bin/gcc"
-    host_makefile_frag="config/mh-lynxrs6k"
-    ;;
   *-*-darwin*)
     host_makefile_frag="config/mh-darwin"
     ;;
@@ -1227,40 +1020,9 @@ case "${host}" in
   rs6000-*-aix*)
     host_makefile_frag="config/mh-ppc-aix"
     ;;
-  *-*-lynxos*)
-    # /bin/cc is less than useful for our purposes.  Always use GCC
-    tentative_cc="/bin/gcc"
-    ;;
-  *-*-sysv4*)
-    host_makefile_frag="config/mh-sysv4"
-    ;;
-  # This is placed last to prevent interfering with the cases above.
-  i[[3456789]]86-*-*)
-    # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
-    host_makefile_frag="config/mh-x86omitfp"
-    ;;
 esac
 fi
 
-# If we aren't going to be using gcc, see if we can extract a definition
-# of CC from the fragment.
-# Actually, use the 'pre-extracted' version above.
-if test -z "${CC}" && test "${build}" = "${host}" ; then
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-  found=
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/gcc; then
-      found=yes
-      break
-    fi
-  done
-  IFS="$save_ifs"
-  if test -z "${found}" && test -n "${tentative_cc}" ; then
-    CC=$tentative_cc
-  fi
-fi
-
 if test "${build}" != "${host}" ; then
   AR_FOR_BUILD=${AR_FOR_BUILD-ar}
   AS_FOR_BUILD=${AS_FOR_BUILD-as}
@@ -1739,7 +1501,7 @@ ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always.
   build_lto_plugin=yes
 ],[if test x"$default_enable_lto" = x"yes" ; then
     case $target in
-      *-apple-darwin* | *-cygwin* | *-mingw*) ;;
+      *-apple-darwin9 | *-cygwin* | *-mingw*) ;;
       # On other non-ELF platforms, LTO has yet to be validated.
       *) enable_lto=no ;;
     esac
@@ -2374,46 +2136,12 @@ done
 # the *-*-osname triplets last.
 md_exec_prefix=
 case "${target}" in
-  alpha*-*-*vms*)
-    md_exec_prefix=/gnu/lib/gcc-lib
-    ;;
   i[[34567]]86-pc-msdosdjgpp*)
     md_exec_prefix=/dev/env/DJDIR/bin
     ;;
-  i[[34567]]86-*-sco3.2v5*)
-    if test $with_gnu_as = yes; then
-      md_exec_prefix=/usr/gnu/bin
-    else
-      md_exec_prefix=/usr/ccs/bin/elf
-    fi
-    ;;
-
-  mn10300-*-* | \
-  powerpc-*-chorusos* | \
-  powerpc*-*-eabi* | \
-  powerpc*-*-sysv* | \
-  powerpc*-*-kaos* | \
-  s390x-ibm-tpf*)
-    md_exec_prefix=/usr/ccs/bin
-    ;;
-  sparc64-*-elf*)
-    ;;
-  v850*-*-*)
-    md_exec_prefix=/usr/ccs/bin
-    ;;
-  xtensa*-*-elf*)
-    ;;
-
-  *-*-beos* | \
-  *-*-elf* | \
   *-*-hpux* | \
-  *-*-netware* | \
   *-*-nto-qnx* | \
-  *-*-rtems* | \
-  *-*-solaris2* | \
-  *-*-sysv[[45]]* | \
-  *-*-vxworks* | \
-  *-wrs-windiss)
+  *-*-solaris2*)
     md_exec_prefix=/usr/ccs/bin
     ;;
 esac
@@ -2423,9 +2151,6 @@ extra_nmflags_for_target=
 extra_ranlibflags_for_target=
 target_makefile_frag=/dev/null
 case "${target}" in
-  mep*-*-*)
-    target_makefile_frag="config/mt-mep"
-    ;;
   spu-*-*)
     target_makefile_frag="config/mt-spu"
     ;;
@@ -2438,9 +2163,6 @@ case "${target}" in
   mips*-*-*linux* | mips*-*-gnu*)
     target_makefile_frag="config/mt-mips-gnu"
     ;;
-  *-*-netware*)
-    target_makefile_frag="config/mt-netware"
-    ;;
   *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu)
     target_makefile_frag="config/mt-gnu"
     ;;
@@ -2455,9 +2177,6 @@ case "${target}" in
     # ranlib before Darwin10 requires the -c flag to look at common symbols.
     extra_ranlibflags_for_target=" -c"
     ;;
-  mips*-*-pe | sh*-*-pe | *arm-wince-pe)
-    target_makefile_frag="config/mt-wince"
-    ;;
 esac
 
 alphaieee_frag=/dev/null
@@ -2584,7 +2303,7 @@ esac
 # Decide which environment variable is used to find dynamic libraries.
 case "${host}" in
   *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
-  *-*-darwin* | *-*-rhapsody* ) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
+  *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;;
   *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;;
   *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
 esac
@@ -3228,7 +2947,6 @@ AC_SUBST(NM_FOR_BUILD)
 AC_SUBST(RANLIB_FOR_BUILD)
 AC_SUBST(WINDMC_FOR_BUILD)
 AC_SUBST(WINDRES_FOR_BUILD)
-AC_SUBST(config_shell)
 
 # Generate default definitions for YACC, M4, LEX and other programs that run
 # on the build machine.  These are used if the Makefile can't locate these