X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=configure.in;h=8712586b3a5d61a1ff954161ce816da17607ac43;hb=bd21e58e631f4320cd48921034fdcabfdbd1c943;hp=1cf5adaac6f081f440b59d8c366c706a2d9c0dae;hpb=2e70b094794a7596c3a365183482585939823fe7;p=deliverable%2Fbinutils-gdb.git

diff --git a/configure.in b/configure.in
index 1cf5adaac6..8712586b3a 100644
--- a/configure.in
+++ b/configure.in
@@ -18,6 +18,8 @@
 ##############################################################################
 ### WARNING: this file contains embedded tabs.  Do not run untabify on this file.
 
+sinclude(config/acx.m4)
+
 AC_INIT(move-if-change)
 AC_PREREQ(2.13)
 AC_CANONICAL_SYSTEM
@@ -25,8 +27,8 @@ AC_ARG_PROGRAM
 
 # Get 'install' or 'install-sh' and its variants.
 AC_PROG_INSTALL
-
-sinclude(config/acx.m4)
+ACX_PROG_LN
+AC_PROG_LN_S
 
 ### we might need to use some other shell than /bin/sh for running subshells
 ### If we are on Windows, search for the shell.  This will permit people
@@ -78,10 +80,17 @@ AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS)
 
 moveifchange=${srcdir}/move-if-change
 
+srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
+
+# We pass INSTALL explicitly to sub-makes.  Make sure that it is not
+# a relative path.
+if test "$INSTALL" = "${srcdir}/install-sh -c"; then
+  INSTALL="${srcpwd}/install-sh -c"
+fi
+
 # Set srcdir to "." if that's what it is.
 # This is important for multilib support.
 pwd=`${PWDCMD-pwd}`
-srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}`
 if test "${pwd}" = "${srcpwd}" ; then
   srcdir=.
 fi
@@ -124,9 +133,17 @@ fi
 # Double entries in build_configdirs, configdirs, or target_configdirs may
 # cause circular dependencies and break everything horribly.
 
+# these library is used by various programs built for the build
+# environment
+#
+build_libs="build-libiberty"
+
+# these tools are built for the build environment
+build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fixincludes"
+
 # these libraries are used by various programs built for the host environment
 #
-host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl tix libgui zlib"
+host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp"
 
 # these tools are built for the host environment
 # Note, the powerpc-eabi build depends on sim occurring before gdb in order to
@@ -149,7 +166,8 @@ target_libraries="target-libiberty \
 		target-libgloss \
 		target-newlib \
 		target-libstdc++-v3 \
-		target-libf2c \
+		target-libmudflap \
+		target-libgfortran \
 		${libgcj} \
 		target-libobjc \
 		target-libada"
@@ -170,19 +188,9 @@ target_tools="target-examples target-groff target-gperf target-rda"
 ## is important because configure will choke if they ever get through.
 ## ${configdirs} is directories we build using the host tools.
 ## ${target_configdirs} is directories we build using the target tools.
-#
 configdirs=`echo ${host_libs} ${host_tools}`
 target_configdirs=`echo ${target_libraries} ${target_tools}`
-
-# Only make build modules if build != host.
-# This should be done more generally, but at the moment it doesn't matter.
-if test ${host_alias} != ${build_alias} ; then
-  # This is the only build module.
-  build_modules=libiberty
-else
-  build_modules=
-fi
-
+build_configdirs=`echo ${build_libs} ${build_tools}`
 
 ################################################################################
 
@@ -227,7 +235,7 @@ fi
 case ${with_x} in
   yes | "") ;; # the default value for this tree is that X11 is available
   no)
-    skipdirs="${skipdirs} tk tix itcl libgui"
+    skipdirs="${skipdirs} tk itcl libgui"
     # We won't be able to build gdbtk without X.
     enable_gdbtk=no 
     ;;
@@ -249,8 +257,8 @@ esac
 
 # If both --with-headers and --with-libs are specified, default to
 # --without-newlib.
-if test x"${with_headers}" != x && test x"${with_headers} != xno \
-   && test x"${with_libs}" != x && test x"${with_libs} != xno ; then
+if test x"${with_headers}" != x && test x"${with_headers}" != xno \
+   && test x"${with_libs}" != x && test x"${with_libs}" != xno ; then
   if test x"${with_newlib}" = x ; then
     with_newlib=no
   fi
@@ -278,17 +286,17 @@ case "${host}" in
     noconfigdirs="$noconfigdirs byacc"
     ;;
   i[[3456789]]86-*-vsta)
-    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl tix gnuserv gettext"
+    noconfigdirs="$noconfigdirs tcl expect dejagnu make texinfo bison patch flex byacc send-pr gprof uudecode dejagnu diff guile perl itcl gnuserv gettext"
     ;;
   i[[3456789]]86-*-go32* | i[[3456789]]86-*-msdosdjgpp*)
-    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl tix gnuserv libffi"
+    noconfigdirs="$noconfigdirs tcl tk expect dejagnu send-pr uudecode guile itcl gnuserv libffi"
     ;;
   i[[3456789]]86-*-mingw32*)
-    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl tix gnuserv"
+    # noconfigdirs="tcl tk expect dejagnu make texinfo bison patch flex byacc send-pr uudecode dejagnu diff guile perl itcl gnuserv"
     noconfigdirs="$noconfigdirs expect dejagnu autoconf automake send-pr rcs guile perl texinfo libtool"
     ;;
   i[[3456789]]86-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl tix libgui gdb"
+    noconfigdirs="$noconfigdirs tk itcl libgui gdb"
     ;;
   *-*-cygwin*)
     noconfigdirs="$noconfigdirs autoconf automake send-pr rcs guile perl"
@@ -297,16 +305,17 @@ case "${host}" in
     noconfigdirs="$noconfigdirs rcs"
     ;;
   ppc*-*-pe)
-    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl tix gnuserv"
+    noconfigdirs="$noconfigdirs patch diff make tk tcl expect dejagnu autoconf automake texinfo bison send-pr gprof rcs guile perl itcl gnuserv"
     ;;
   powerpc-*-beos*)
-    noconfigdirs="$noconfigdirs tk itcl tix libgui gdb dejagnu readline"
+    noconfigdirs="$noconfigdirs tk itcl libgui gdb dejagnu readline"
     ;;
   *-*-darwin*)
-    noconfigdirs="$noconfigdirs tk itcl tix libgui"
+    noconfigdirs="$noconfigdirs tk itcl libgui"
     ;;
 esac
 
+
 AC_ARG_ENABLE(libada,
 [  --enable-libada        Builds libada directory],
 ENABLE_LIBADA=$enableval,
@@ -331,24 +340,63 @@ no)
   ;;
 esac
 
+
+# Allow --disable-libmudflap to exclude target-libmudflap
+case $enable_libmudflap in
+yes)
+    ;;
+no)
+    noconfigdirs="$noconfigdirs target-libmudflap"
+    ;;
+"")
+    case "${target}" in
+    *-*-linux*-gnu | *-*-gnu* | *-*-k*bsd*-gnu)
+        # Enable libmudflap by default in GNU and friends.
+	;;
+    *-*-freebsd*)
+        # Enable libmudflap by default in FreeBSD.
+	;;
+    *)
+        # Disable it by default everywhere else.
+	noconfigdirs="$noconfigdirs target-libmudflap"
+	;;
+    esac
+esac
+
+
 case "${target}" in
   *-*-chorusos)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
   powerpc-*-darwin*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
-    noconfigdirs="$noconfigdirs target-libobjc"
     ;;
   *-*-darwin*)
     noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb gprof"
-    noconfigdirs="$noconfigdirs target-libobjc ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   *-*-freebsd[[12]] | *-*-freebsd[[12]].* | *-*-freebsd*aout*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
     ;;
+  *-*-freebsd*)
+    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
+    if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \
+	&& test -f /usr/local/include/gmp.h; then
+      with_gmp=/usr/local
+    fi
+
+    # Skip some stuff that's unsupported on some FreeBSD configurations.
+    case "${target}" in
+      i*86-*-*) ;;
+      alpha*-*-*) ;;
+      *)
+	noconfigdirs="$noconfigdirs ${libgcj}"
+	;;
+    esac
+    ;;
   *-*-kaos*)
     # Remove unsupported stuff on all kaOS configurations.
-    skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-libf2c target-librx"
+    skipdirs="target-libiberty ${libgcj} target-libstdc++-v3 target-librx"
     skipdirs="$skipdirs target-libobjc target-examples target-groff target-gperf"
     skipdirs="$skipdirs zlib fastjar target-libjava target-boehm-gc target-zlib"
     noconfigdirs="$noconfigdirs target-libgloss"
@@ -366,17 +414,11 @@ case "${target}" in
 	;;
     esac
     ;;
-  *-*-netware)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-newlib target-libiberty target-libgloss ${libgcj}"
+  *-*-netware*)
+    noconfigdirs="$noconfigdirs target-newlib target-libiberty target-libgloss ${libgcj} target-libmudflap"
     ;;
   *-*-rtems*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
-    case ${target} in
-	h8300*-*-* | h8500-*-*)
-	  noconfigdirs="$noconfigdirs target-libf2c"
-          ;;
-        *) ;;
-    esac
     ;;
   *-*-uclinux*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss target-rda ${libgcj}"
@@ -391,15 +433,12 @@ case "${target}" in
     noconfigdirs="$noconfigdirs gas ld fileutils target-newlib target-libgloss"
     ;;
   alpha*-*-*vms*)
-    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb ld target-newlib target-libgloss build-fixincludes ${libgcj}"
     ;;
   alpha*-*-linux*)
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  alpha*-*-freebsd* | alpha*-*-kfreebsd*-gnu)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
   alpha*-*-*)
     # newlib is not 64 bit ready
     noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
@@ -414,7 +453,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ${libgcj}"
     noconfigdirs="$noconfigdirs target-examples"
     noconfigdirs="$noconfigdirs target-libiberty texinfo send-pr"
-    noconfigdirs="$noconfigdirs tcl tix tk itcl libgui sim"
+    noconfigdirs="$noconfigdirs tcl tk itcl libgui sim"
     noconfigdirs="$noconfigdirs expect dejagnu"
     # the C++ libraries don't build on top of CE's C libraries
     noconfigdirs="$noconfigdirs target-libstdc++-v3"
@@ -428,12 +467,18 @@ case "${target}" in
   arc-*-*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
+  arm-semi-aof )
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   arm-*-coff | strongarm-*-coff | xscale-*-coff)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
+  arm-*-elf* | strongarm-*-elf* | xscale-*-elf* | arm*-*-eabi* )
     noconfigdirs="$noconfigdirs target-libffi target-qthreads"
     ;;
+  arm*-*-symbianelf*)
+    noconfigdirs="$noconfigdirs ${libgcj} target-libiberty"
+    ;;
   arm-*-pe*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
@@ -456,7 +501,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld target-libgloss ${libgcj}"
     ;;
   avr-*-*)
-    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 build-fixincludes ${libgcj}"
     ;;
   c4x-*-* | tic4x-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
@@ -467,6 +512,9 @@ case "${target}" in
   cris-*-*)
     noconfigdirs="$noconfigdirs ${libgcj} target-newlib target-libgloss"
     ;;
+  crx-*-*)
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-mudflap ${libgcj}"
+    ;;
   d10v-*-*)
     noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
     ;;
@@ -480,10 +528,13 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
   h8300*-*-*)
-    noconfigdirs="$noconfigdirs target-libgloss ${libgcj} target-libf2c"
+    noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
   h8500-*-*)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} target-libf2c"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    ;;
+  hppa1.1-*-osf* | hppa1.1-*-bsd* )
+    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   hppa*64*-*-linux* | parisc*64*-*-linux*)
     # In this case, it's because the hppa64-linux target is for
@@ -509,18 +560,18 @@ case "${target}" in
     ;;
   ia64*-*-elf*)
     # No gdb support yet.
-    noconfigdirs="$noconfigdirs tix readline mmalloc libgui itcl gdb"
+    noconfigdirs="$noconfigdirs readline mmalloc libgui itcl gdb"
     ;;
   ia64*-**-hpux*)
     # No gdb or ld support yet.
-    noconfigdirs="$noconfigdirs ${libgcj} tix readline mmalloc libgui itcl gdb ld"
+    noconfigdirs="$noconfigdirs ${libgcj} readline mmalloc libgui itcl gdb ld"
+    ;;
+  i370-*-opened*)
+    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   i[[3456789]]86-*-coff | i[[3456789]]86-*-elf)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
-  i[[3456789]]86-*-freebsd* | i[[3456789]]86-*-kfreebsd*-gnu)
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss"
-    ;;
   i[[3456789]]86-*-linux*)
     # The GCC port for glibc1 has no MD_FALLBACK_FRAME_STATE_FOR, so let's
     # not build java stuff by default.
@@ -542,30 +593,38 @@ case "${target}" in
     ;;
   i[[3456789]]86-*-mingw32*)
     target_configdirs="$target_configdirs target-mingw"
-    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs expect target-libgloss ${libgcj} build-fixincludes"
 
     # Can't build gdb for mingw32 if not native.
     case "${host}" in
       i[[3456789]]86-*-mingw32) ;; # keep gdb tcl tk expect etc.
-      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix gnuserv"
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl gnuserv"
          ;;
     esac
     ;;    
   *-*-cygwin*)
     target_configdirs="$target_configdirs target-libtermcap target-winsup"
-    noconfigdirs="$noconfigdirs target-gperf target-libgloss ${libgcj}"
-    # always build newlib.
-    skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+    noconfigdirs="$noconfigdirs target-gperf target-libgloss build-fixincludes ${libgcj}"
+    # always build newlib if winsup directory is present.
+    if test -d "$srcdir/winsup"; then
+      skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
+    elif test -d "$srcdir/newlib"; then
+      echo "Warning: winsup is missing so newlib can't be built."
+    fi
 
     # Can't build gdb for Cygwin if not native.
     case "${host}" in
       *-*-cygwin*) ;; # keep gdb tcl tk expect etc.
-      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl tix libgui gnuserv"
+      *) noconfigdirs="$noconfigdirs gdb tcl tk expect itcl libgui gnuserv"
          ;;
     esac
     ;;    
+  i[[3456789]]86-moss-msdos | i[[3456789]]86-*-moss* | \
+  i[[3456789]]86-*-uwin* | i[[3456789]]86-*-interix* )
+    noconfigdirs="$noconfigdirs build-fixincludes"
+    ;;
   i[[3456789]]86-*-pe)
-    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs target-libstdc++-v3 target-libgloss ${libgcj} build-fixincludes"
     ;;
   i[[3456789]]86-*-sco3.2v5*)
     # The linker does not yet know about weak symbols in COFF,
@@ -612,29 +671,32 @@ case "${target}" in
     ;;
   powerpc-*-aix*)
     # copied from rs6000-*-* entry
-    noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   powerpc*-*-winnt* | powerpc*-*-pe* | ppc*-*-pe)
     target_configdirs="$target_configdirs target-winsup"
-    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl tix gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb tcl tk make expect target-libgloss itcl gnuserv ${libgcj}"
     # always build newlib.
     skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'`
     ;;
     # This is temporary until we can link against shared libraries
   powerpcle-*-solaris*)
-    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl tix gnuserv ${libgcj}"
+    noconfigdirs="$noconfigdirs gdb sim make tcl tk expect itcl gnuserv ${libgcj}"
     ;;
   powerpc-*-beos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
   powerpc-*-eabi)
-    noconfigdirs="$noconfigdirs ${libgcj}"
+    noconfigdirs="$noconfigdirs ${libgcj} build-fixincludes"
+    ;;
+  powerpc-*-eabi* | powerpcle-*-eabi* | powerpc-*-rtems* )
+    noconfigdirs="$noconfigdirs build-fixincludes"
     ;;
   rs6000-*-lynxos*)
     noconfigdirs="$noconfigdirs target-newlib gprof ${libgcj}"
     ;;
   rs6000-*-aix*)
-    noconfigdirs="$noconfigdirs gprof target-libada target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   rs6000-*-*)
     noconfigdirs="$noconfigdirs gprof ${libgcj}"
@@ -643,8 +705,7 @@ case "${target}" in
     noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss ${libgcj}"
     ;;
   mips*-*-irix5*)
-    # The GNU linker does not support shared libraries.
-    noconfigdirs="$noconfigdirs ld gprof target-libgloss ${libgcj}"
+    noconfigdirs="$noconfigdirs gprof target-libgloss ${libgcj}"
     ;;
   mips*-*-irix6*)
     # Linking libjava exceeds command-line length limits on at least
@@ -729,7 +790,7 @@ case "${target}" in
   ip2k-*-*)
     noconfigdirs="$noconfigdirs target-libiberty target-libstdc++-v3 ${libgcj}"
     ;;
-  *-*-linux*)
+  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
   *-*-lynxos*)
@@ -888,6 +949,9 @@ case "${host}" in
     tentative_cc="/usr/cygnus/progressive/bin/gcc"
     host_makefile_frag="config/mh-lynxrs6k"
     ;;
+  powerpc-*-darwin*)
+    host_makefile_frag="config/mh-ppc-darwin"
+    ;;
   *-*-lynxos*)
     # /bin/cc is less than useful for our purposes.  Always use GCC
     tentative_cc="/bin/gcc"
@@ -895,6 +959,11 @@ case "${host}" in
   *-*-sysv4*)
     host_makefile_frag="config/mh-sysv4"
     ;;
+  # This is placed last to prevent interfering with the cases above.
+  i[[3456789]]86-*-*)
+    # Build the stage2 and stage3 compilers with -fomit-frame-pointer.
+    host_makefile_frag="config/mh-x86omitfp"
+    ;;
 esac
 fi
 
@@ -921,7 +990,6 @@ if test "${build}" != "${host}" ; then
   # If we are doing a Canadian Cross, in which the host and build systems
   # are not the same, we set reasonable default values for the tools.
 
-  BISON=${BISON-bison}
   CC=${CC-${host_alias}-gcc}
   CFLAGS=${CFLAGS-"-g -O2"}
   CXX=${CXX-${host_alias}-c++}
@@ -933,47 +1001,6 @@ if test "${build}" != "${host}" ; then
   GCC_FOR_TARGET=${GCC_FOR_TARGET-${CC_FOR_TARGET-${target_alias}-gcc}}
   BUILD_PREFIX=${build_alias}-
   BUILD_PREFIX_1=${build_alias}-
-  MAKEINFO=${MAKEINFO-makeinfo}
-
-  if test -z "${YACC}" ; then
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-    for dir in $PATH; do
-      test -z "$dir" && dir=.
-      if test -f $dir/bison; then
-	YACC="bison -y"
-	break
-      fi
-      if test -f $dir/byacc; then
-	YACC=byacc
-	break
-      fi
-      if test -f $dir/yacc; then
-	YACC=yacc
-	break
-      fi
-    done
-    IFS="$save_ifs"
-    if test -z "${YACC}" ; then
-      YACC="bison -y"
-    fi
-  fi
-
-  if test -z "${LEX}" ; then
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-    for dir in $PATH; do
-      test -z "$dir" && dir=.
-      if test -f $dir/flex; then
-	LEX=flex
-	break
-      fi
-      if test -f $dir/lex; then
-	LEX=lex
-	break
-      fi
-    done
-    IFS="$save_ifs"
-    LEX=${LEX-flex}
-  fi
 
 else
   # Set reasonable default values for some tools even if not Canadian.
@@ -984,71 +1011,18 @@ else
   # in Makefile.in, so can still be overridden by fragments.
   # This is all going to change when we autoconfiscate...
 
-  BISON="\$(USUAL_BISON)"
   CC_FOR_BUILD="\$(CC)"
   GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)"
   BUILD_PREFIX=
   BUILD_PREFIX_1=loser-
-  MAKEINFO="\$(USUAL_MAKEINFO)"
-  LEX="\$(USUAL_LEX)"
-  YACC="\$(USUAL_YACC)"
-
-  # If CC is still not set, try to get gcc.
-  cc_prog_is_gcc=
-  if test -z "${CC}" ; then
-    IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-    for dir in $PATH; do
-      test -z "$dir" && dir=.
-      if test -f $dir/gcc; then
-	CC="gcc"
-	cc_prog_is_gcc=yes
-	echo 'void f(){}' > conftest.c
-	if test -z "`${CC} -g -c conftest.c 2>&1`"; then
-	  CFLAGS=${CFLAGS-"-g -O2"}
-	  CXXFLAGS=${CXXFLAGS-"-g -O2"}
-	else
-	  CFLAGS=${CFLAGS-"-O2"}
-	  CXXFLAGS=${CXXFLAGS-"-O2"}
-	fi
-	rm -f conftest*
-	break
-      fi
-    done
-    IFS="$save_ifs"
-    CC=${CC-cc}
-  else
-    # Determine if we are using gcc.
-    cat > conftest.c <<EOF
-#ifdef __GNUC__
-  yes;
-#endif
-EOF
-    if ${CC} -E conftest.c | grep yes >/dev/null 2>&1; then
-      cc_prog_is_gcc=yes
-    fi
-    rm -f conftest.c
-    if test -z "${CFLAGS}"; then
-      # Here CC is set but CFLAGS is not.  Use a quick hack to use -O2 if CC
-      # is set to a version of gcc.
-      if test "$cc_prog_is_gcc" = yes; then
-	echo 'void f(){}' > conftest.c
-	if test -z "`${CC} -g -c conftest.c 2>&1`"; then
-	  CFLAGS=${CFLAGS-"-g -O2"}
-	  CXXFLAGS=${CXXFLAGS-"-g -O2"}
-	else
-	  CFLAGS=${CFLAGS-"-O2"}
-	  CXXFLAGS=${CXXFLAGS-"-O2"}
-	fi
-	rm -f conftest*
-      fi
-    fi
-  fi
+
+  AC_PROG_CC
 
   # We must set the default linker to the linker used by gcc for the correct
   # operation of libtool.  If LD is not defined and we are using gcc, try to
   # set the LD default to the ld used by gcc.
   if test -z "$LD"; then
-    if test "$cc_prog_is_gcc" = yes; then
+    if test "$GCC" = yes; then
       case $build in
       *-*-mingw*)
 	gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;;
@@ -1069,6 +1043,82 @@ EOF
 fi
 
 ACX_PROG_GNAT
+ACX_PROG_CMP_IGNORE_INITIAL
+
+# Check for GMP and MPFR
+gmplibs=
+gmpinc=
+have_gmp=yes
+# Specify a location for mpfr
+# check for this first so it ends up on the link line before gmp.
+AC_ARG_WITH(mpfr-dir, [  --with-mpfr-dir=PATH    Specify source directory for MPFR library])
+
+if test "x$with_mpfr_dir" != x; then
+  gmpinc="-I$with_mpfr_dir/mpfr"
+  gmplibs="$with_mpfr_dir/libmpfr.a"
+else
+  gmplibs="-lmpfr"
+fi
+
+AC_ARG_WITH(mpfr, [  --with-mpfr=PATH        Specify directory for installed MPFR library])
+
+if test "x$with_mpfr" != x; then
+  gmplibs="-L$with_mpfr/lib $gmplibs"
+  gmpinc="-I$with_mpfr/include"
+fi
+
+# Specify a location for gmp
+AC_ARG_WITH(gmp-dir, [  --with-gmp-dir=PATH     Specify source directory for GMP library])
+
+if test "x$with_gmp_dir" != x; then
+  gmpinc="$gmpinc -I$with_gmp_dir"
+  if test -f "$with_gmp_dir/.libs/libgmp.a"; then
+    gmplibs="$gmplibs $with_gmp_dir/.libs/libgmp.a"
+  elif test -f "$with_gmp_dir/_libs/libgmp.a"; then
+    gmplibs="$gmplibs $with_gmp_dir/_libs/libgmp.a"
+  fi
+  # One of the later tests will catch the error if neither library is present.
+else
+  gmplibs="$gmplibs -lgmp"
+fi
+
+AC_ARG_WITH(gmp, [  --with-gmp=PATH         Specify directory for installed GMP library])
+
+if test "x$with_gmp" != x; then
+  gmplibs="-L$with_gmp/lib $gmplibs"
+  gmpinc="-I$with_gmp/include $gmpinc"
+fi
+
+saved_CFLAGS="$CFLAGS"
+CFLAGS="$CFLAGS $gmpinc"
+# Check GMP actually works
+AC_MSG_CHECKING([for correct version of gmp.h])
+AC_TRY_COMPILE([#include "gmp.h"],[
+#if __GNU_MP_VERSION < 3
+choke me
+#endif
+], [AC_MSG_RESULT([yes])],
+  [AC_MSG_RESULT([no]); have_gmp=no])
+
+if test x"$have_gmp" = xyes; then
+  AC_MSG_CHECKING([for MPFR])
+
+  saved_LIBS="$LIBS"
+  LIBS="$LIBS $gmplibs"
+  AC_TRY_LINK([#include <gmp.h>
+#include <mpfr.h>], [mpfr_t n; mpfr_init(n);],
+    [AC_MSG_RESULT([yes])],  [AC_MSG_RESULT([no]); have_gmp=no])
+  LIBS="$saved_LIBS"
+  CFLAGS="$saved_CFLAGS"
+fi
+
+# Flags needed for both GMP and/or MPFR
+AC_SUBST(gmplibs)
+AC_SUBST(gmpinc)
+
+# By default, C is the only stage 1 language.
+stage1_languages=c
+AC_SUBST(stage1_languages)
 
 # Figure out what language subdirectories are present.
 # Look if the user specified --enable-languages="..."; if not, use
@@ -1123,6 +1173,7 @@ if test -d ${srcdir}/gcc; then
 
   new_enable_languages=c
   missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ `
+  potential_languages=c
 
   for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do
     case ${lang_frag} in
@@ -1132,18 +1183,21 @@ if test -d ${srcdir}/gcc; then
       ${srcdir}/gcc/[[*]]/config-lang.in) ;;
       *)
         # From the config-lang.in, get $language, $target_libs, 
-        # $lang_dirs, and $build_by_default
+        # $lang_dirs, $boot_language, and $build_by_default
         language=
         target_libs=
         lang_dirs=
+        boot_language=
         build_by_default=
+        need_gmp=
         . ${lang_frag}
+        potential_languages="${potential_languages},${language}"
         # This is quite sensitive to the ordering of the case statement arms.
         case ,${enable_languages},:${language}:${have_gnat}:${build_by_default} in
           *::*:*)
             echo "${lang_frag} doesn't set \$language." 1>&2
             exit 1
-	    ;;
+            ;;
           *:ada:no:*)
             # Ada was requested with no preexisting GNAT.  Disable unconditionally.
             add_this_lang=no
@@ -1154,9 +1208,9 @@ if test -d ${srcdir}/gcc; then
             ;;
           *,all,*:*:*:no)
             # 'all' was selected, but this is not a default language
-	    # so do not include it.
+            # so do not include it.
             add_this_lang=no
-	    ;;
+            ;;
           *,all,*:*:*:*)
             # 'all' was selected and this is a default language; include it.
             add_this_lang=yes
@@ -1165,22 +1219,44 @@ if test -d ${srcdir}/gcc; then
             add_this_lang=no
             ;;
         esac
-        case $add_this_lang in
+
+        # Disable languages that need GMP if it isn't available.
+        case ,${enable_languages},:${have_gmp}:${need_gmp} in
+          *,${language},*:no:yes)
+            # Specifically requested language; tell them.
+            AC_MSG_ERROR([GMP with MPFR support is required to build $language])
+            ;;
+          *:no:yes)
+            # Silently disable.
+            add_this_lang=no
+            ;;
+        esac
+        
+	case $add_this_lang in
 	  no)
             # Remove language-dependent dirs.
-            eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\" ;;
+            eval noconfigdirs='"$noconfigdirs "'\"$target_libs $lang_dirs\"
+	    ;;
           *)
 	    new_enable_languages="$new_enable_languages,$language"
-	    missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"` ;;
+	    missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"`
+	    case ${boot_language} in
+	      yes)
+		# Add to (comma-separated) list of stage 1 languages.
+		stage1_languages="${stage1_languages},${language}"
+		;;
+	    esac
+	    ;;
         esac
         ;;
     esac
   done
 
-  missing_languages=`echo "$missing_languages" | sed -e s/^,// -e s/,\$//`
+  missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"`
   if test "x$missing_languages" != x; then
     AC_MSG_ERROR([
-The following requested languages were not found: ${missing_languages}])
+The following requested languages were not found: ${missing_languages}
+The available languages are: ${potential_languages}])
   fi
 
   if test "x$new_enable_languages" != "x$enable_languages"; then
@@ -1190,13 +1266,13 @@ The following requested languages were not found: ${missing_languages}])
   ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
 fi
 
-# Remove the entries in $skipdirs and $noconfigdirs from $configdirs and
-# $target_configdirs.
+# Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
+# $build_configdirs and $target_configdirs.
 # If we have the source for $noconfigdirs entries, add them to $notsupp.
 
 notsupp=""
 for dir in . $skipdirs $noconfigdirs ; do
-  dirname=`echo $dir | sed -e s/target-//g`
+  dirname=`echo $dir | sed -e s/target-//g -e s/build-//g`
   if test $dir != .  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
     if test -r $srcdir/$dirname/configure ; then
@@ -1207,6 +1283,16 @@ for dir in . $skipdirs $noconfigdirs ; do
       fi
     fi
   fi
+  if test $dir != .  && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+    build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"`
+    if test -r $srcdir/$dirname/configure ; then
+      if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	true
+      else
+	notsupp="$notsupp $dir"
+      fi
+    fi
+  fi
   if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
     if test -r $srcdir/$dirname/configure ; then
@@ -1239,6 +1325,15 @@ fi
 # Quietly strip out all directories which aren't configurable in this tree.
 # This relies on all configurable subdirectories being autoconfiscated, which
 # is now the case.
+build_configdirs_all="$build_configdirs"
+build_configdirs=
+for i in ${build_configdirs_all} ; do
+  j=`echo $i | sed -e s/build-//g` 
+  if test -f ${srcdir}/$j/configure ; then
+    build_configdirs="${build_configdirs} $i"
+  fi
+done
+
 configdirs_all="$configdirs"
 configdirs=
 for i in ${configdirs_all} ; do
@@ -1246,6 +1341,7 @@ for i in ${configdirs_all} ; do
     configdirs="${configdirs} $i"
   fi
 done
+
 target_configdirs_all="$target_configdirs"
 target_configdirs=
 for i in ${target_configdirs_all} ; do
@@ -1272,7 +1368,7 @@ if test -n "${notsupp}" && test -z "${norecursion}" ; then
 	  appdirs=""
 	  break
 	fi
-	if echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
+	if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then
 	  appdirs=""
 	  break
 	fi
@@ -1370,14 +1466,11 @@ extra_nmflags_for_target=
 extra_ranlibflags_for_target=
 target_makefile_frag=/dev/null
 case "${target}" in
-  i[[3456789]]86-*-netware*)
+  *-*-netware*)
     target_makefile_frag="config/mt-netware"
     ;;
-  powerpc-*-netware*)
-    target_makefile_frag="config/mt-netware"
-    ;;
-  *-*-linux*)
-    target_makefile_frag="config/mt-linux"
+  *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
+    target_makefile_frag="config/mt-gnu"
     ;;
   *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*)
     # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm 
@@ -1458,7 +1551,6 @@ if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-
   extra_host_args="$extra_host_args --with-newlib"
 fi
 
-
 # Default to using --with-stabs for certain targets.
 if test x${with_stabs} = x ; then
   case "${target}" in
@@ -1484,106 +1576,16 @@ esac
 tooldir='${exec_prefix}'/${target_alias}
 build_tooldir=${tooldir}
 
-# Generate a default definition for YACC.  This is used if the makefile can't
-# locate bison or byacc in objdir.
-
-for prog in 'bison -y' byacc yacc
-do
-  set dummy $prog; tmp=$2
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/$tmp; then
-      DEFAULT_YACC="$prog"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  test -n "$DEFAULT_YACC" && break
-done
-
-# Generate a default definition for M4.  This is used if the makefile can't
-# locate m4 in objdir.
-
-for prog in gm4 gnum4 m4
-do
-  set dummy $prog; tmp=$2
-  IFS="${IFS=   }"; save_ifs="$IFS"; IFS="${IFS}:"
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/$tmp; then
-      DEFAULT_M4="$prog"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  test -n "$DEFAULT_M4" && break
-done
-
-# Generate a default definition for LEX.  This is used if the makefile can't
-# locate flex in objdir.
-
-for prog in flex lex
-do
-  set dummy $prog; tmp=$2
-  IFS="${IFS= 	}"; save_ifs="$IFS"; IFS="${IFS}:"
-  for dir in $PATH; do
-    test -z "$dir" && dir=.
-    if test -f $dir/$tmp; then
-      DEFAULT_LEX="$prog"
-      break
-    fi
-  done
-  IFS="$save_ifs"
-
-  test -n "$DEFAULT_LEX" && break
-done
-
-# FIXME Should this be done recursively ??? (Useful for e.g. gdbtest)
-# Set up the list of links to be made.
-# ${links} is the list of link names, and ${files} is the list of names to link to.
-
-# Make the links.
-configlinks="${links}"
-if test -r ./config.status  ; then
-  mv -f ./config.status ./config.back
-fi
-while test -n "${files}" ; do
-  # set file to car of files, files to cdr of files
-  set ${files}; file=$1; shift; files=$*
-  set ${links}; link=$1; shift; links=$*
-
-  if test ! -r ${srcdir}/${file} ; then
-    if test ! -r ${file} ; then
-      echo '***' "${progname}: cannot create a link \"${link}\"," 1>&2
-      echo '***' "since the file \"${srcdir}/${file}\" does not exist." 1>&2
-      exit 1
-    else
-      srcfile=${file}
-    fi
-  else
-    srcfile=${srcdir}/${file}
-  fi
-
-  ${remove} -f ${link}
-  # Make a symlink if possible, otherwise try a hard link
-  if ${symbolic_link} ${srcfile} ${link} >/dev/null 2>&1 ; then
-    true
-  else
-    # We need to re-remove the file because Lynx leaves a 
-    # very strange directory there when it fails an NFS symlink.
-    ${remove} -r -f ${link}
-    ${hard_link} ${srcfile} ${link}
-  fi
-  if test ! -r ${link} ; then
-    echo '***' "${progname}: unable to link \"${link}\" to \"${srcfile}\"." 1>&2
-    exit 1
-  fi
-
-  echo "Linked \"${link}\" to \"${srcfile}\"."
-done
+# Generate default definitions for YACC, M4, LEX and other programs that run
+# on the build machine.  These are used if the Makefile can't locate these
+# programs in objdir.
+MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing
+AC_CHECK_PROGS([CONFIGURED_BISON], [bison], [$MISSING bison])
+AC_CHECK_PROGS([CONFIGURED_YACC], ['bison -y' byacc yacc], [$MISSING bison -y])
+AC_CHECK_PROGS([CONFIGURED_M4], [gm4 gnum4 m4], [$MISSING m4])
+AC_CHECK_PROGS([CONFIGURED_FLEX], [flex], [$MISSING flex])
+AC_CHECK_PROGS([CONFIGURED_LEX], [flex lex], [$MISSING flex])
+AC_CHECK_PROGS([CONFIGURED_MAKEINFO], makeinfo, [$MISSING makeinfo])
 
 # Create a .gdbinit file which runs the one in srcdir
 # and tells GDB to look there for source files.
@@ -1666,17 +1668,7 @@ esac
 # Record target_configdirs and the configure arguments for target and
 # build configuration in Makefile.
 target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'`
-
-# This is the final value for target_configdirs.  configdirs already
-# has its final value, as does build_modules.  It's time to create some 
-# lists of valid targets.
-
-all_build_modules=
-configure_build_modules=
-for module in ${build_modules} ; do
-  all_build_modules=all-build-${module}
-  configure_build_modules=configure-build-${module}
-done
+build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'`
 
 # Determine whether gdb needs tk/tcl or not.
 # Use 'maybe' since enable_gdbtk might be true even if tk isn't available
@@ -1686,7 +1678,7 @@ done
 # leave out the maybe dependencies when enable_gdbtk is false.  I'm not
 # 100% sure that that's safe though.
 
-gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-tix maybe-all-libgui"
+gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui"
 case "$enable_gdbtk" in
   no)
     GDB_TK="" ;;
@@ -1704,31 +1696,89 @@ case "$enable_gdbtk" in
     ;;
 esac
 
-# Create the 'maybe dependencies'.  This uses a temporary file.
+# Strip out unwanted targets.
 
 # While at that, we remove Makefiles if we were started for recursive
 # configuration, so that the top-level Makefile reconfigures them,
 # like we used to do when configure itself was recursive.
-rm -f maybedep.tmp
-echo '# maybedep.tmp' > maybedep.tmp
 
-# Make-targets which may need maybe dependencies.
-mts="configure all install check clean distclean dvi info install-info"
-mts="${mts} installcheck mostlyclean maintainer-clean TAGS"
+# Loop over modules.  $extrasub must be used with care, limiting as
+# much as possible the usage of range addresses.  That's because autoconf
+# splits the sed script to overcome limits in the number of commands,
+# and relying on carefully-timed sed passes may turn out to be very hard
+# to maintain later.  In this particular case, you just have to be careful
+# not to nest @if/@endif pairs, because configure will not warn you at all.
+
+AC_ARG_ENABLE([bootstrap],
+[  --enable-bootstrap[=lean]     Enable bootstrapping [no]],,
+enable_bootstrap=default)
+
+# Issue errors and warnings for invalid/strange bootstrap combinations.
+case "$configdirs" in
+  *gcc*) have_compiler=yes ;;
+  *) have_compiler=no ;;
+esac
+
+case "$have_compiler:$host:$target:$enable_bootstrap" in
+  *:*:*:no) ;;
+
+  # Default behavior.  (We'll) enable bootstrap if we have a compiler
+  # and we are in a native configuration.
+  yes:$build:$build:default)
+    # This will become 'yes'
+    enable_bootstrap=no ;;
+
+  *:*:*:default)
+    enable_bootstrap=no ;;
+
+  # We have a compiler and we are in a native configuration, bootstrap is ok
+  yes:$build:$build:yes | yes:$build:$build:lean)
+    ;;
+
+  # Other configurations, but we have a compiler.  Assume the user knows
+  # what he's doing.
+  yes:*:*:yes | yes:*:*:lean)
+    AC_MSG_WARN([trying to bootstrap a cross compiler])
+    ;;
+
+  # No compiler: if they passed --enable-bootstrap explicitly, fail
+  no:*:*:yes | no:*:*:lean)
+    AC_MSG_ERROR([cannot bootstrap without a compiler]) ;;
+
+  # Fail if wrong command line
+  *)
+    AC_MSG_ERROR([invalid option for --enable-bootstrap])
+    ;;
+esac
 
-# Loop over modules and make-targets.
-for module in ${build_modules} ; do
+# Adjust the toplevel makefile according to whether bootstrap was selected.
+case "$enable_bootstrap" in
+  yes)
+    bootstrap_lean='#'
+    default_target=bootstrap
+    bootstrap_suffix=bootstrap ;;
+  lean)
+    bootstrap_lean=''
+    default_target=bootstrap
+    bootstrap_suffix=bootstrap ;;
+  no)
+    default_target=all
+    bootstrap_suffix=no-bootstrap ;;
+esac
+AC_SUBST(bootstrap_lean)
+AC_SUBST(default_target)
+
+for module in ${build_configdirs} ; do
   if test -z "${no_recursion}" \
      && test -f ${build_subdir}/${module}/Makefile; then
     echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure"
     rm -f ${build_subdir}/${module}/Makefile
   fi
-  for mt in ${mts} ; do
-    case ${mt} in
-      install) ;; # No installing build modules.
-      *) echo "maybe-${mt}-build-${module}: ${mt}-build-${module}" >> maybedep.tmp ;;
-    esac
-  done
+  extrasub="$extrasub
+/^@if build-$module\$/d
+/^@endif build-$module\$/d
+/^@if build-$module-$bootstrap_suffix\$/d
+/^@endif build-$module-$bootstrap_suffix\$/d"
 done
 for module in ${configdirs} ; do
   if test -z "${no_recursion}" \
@@ -1736,9 +1786,11 @@ for module in ${configdirs} ; do
     echo 1>&2 "*** removing ${module}/Makefile to force reconfigure"
     rm -f ${module}/Makefile
   fi
-  for mt in ${mts} ; do
-    echo "maybe-${mt}-${module}: ${mt}-${module}" >> maybedep.tmp
-  done
+  extrasub="$extrasub
+/^@if $module\$/d
+/^@endif $module\$/d
+/^@if $module-$bootstrap_suffix\$/d
+/^@endif $module-$bootstrap_suffix\$/d"
 done
 for module in ${target_configdirs} ; do
   if test -z "${no_recursion}" \
@@ -1746,12 +1798,15 @@ for module in ${target_configdirs} ; do
     echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure"
     rm -f ${target_subdir}/${module}/Makefile
   fi
-  for mt in ${mts} ; do
-    echo "maybe-${mt}-target-${module}: ${mt}-target-${module}" >> maybedep.tmp
-  done
+  extrasub="$extrasub
+/^@if target-$module\$/d
+/^@endif target-$module\$/d
+/^@if target-$module-$bootstrap_suffix\$/d
+/^@endif target-$module-$bootstrap_suffix\$/d"
 done
-maybe_dependencies=maybedep.tmp
-AC_SUBST_FILE(maybe_dependencies)
+
+extrasub="$extrasub
+/^@if /,/^@endif /d"
 
 # Create the serialization dependencies.  This uses a temporary file.
 
@@ -1814,21 +1869,21 @@ AC_SUBST_FILE(serialization_dependencies)
 # at the end of the argument list.
 # These will be expanded by make, so quote '$'.
 cat <<\EOF_SED > conftestsed
-s/ --no[[^ ]]* / /
-s/ --c[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --sr[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --ho[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --bu[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --t[[a-z-]]*[[= ]][[^ ]]* / /
-s/ --program-[[pst]][[a-z-]]*[[= ]][[^ ]]* / /
-s/ -cache-file[[= ]][[^ ]]* / /
-s/ -srcdir[[= ]][[^ ]]* / /
-s/ -host[[= ]][[^ ]]* / /
-s/ -build[[= ]][[^ ]]* / /
-s/ -target[[= ]][[^ ]]* / /
-s/ -program-prefix[[= ]][[^ ]]* / /
-s/ -program-suffix[[= ]][[^ ]]* / /
-s/ -program-transform-name[[= ]][[^ ]]* / /
+s/ --no[[^ ]]*/ /g
+s/ --c[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --sr[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --ho[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --bu[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --t[[a-z-]]*[[= ]][[^ ]]*//g
+s/ --program-[[pst]][[a-z-]]*[[= ]][[^ ]]*//g
+s/ -cache-file[[= ]][[^ ]]*//g
+s/ -srcdir[[= ]][[^ ]]*//g
+s/ -host[[= ]][[^ ]]*//g
+s/ -build[[= ]][[^ ]]*//g
+s/ -target[[= ]][[^ ]]*//g
+s/ -program-prefix[[= ]][[^ ]]*//g
+s/ -program-suffix[[= ]][[^ ]]*//g
+s/ -program-transform-name[[= ]][[^ ]]*//g
 s/ [[^' -][^ ]*] / /
 s/^ *//;s/ *$//
 s,\$,$$,g
@@ -2016,6 +2071,20 @@ else
 fi
 GCJ_FOR_TARGET=$GCJ_FOR_TARGET' $(FLAGS_FOR_TARGET)'
 
+if test "x${GFORTRAN_FOR_TARGET+set}" = xset; then
+  :
+elif test -d ${srcdir}/gcc; then
+  GFORTRAN_FOR_TARGET='$$r/gcc/gfortran -B$$r/gcc/'
+elif test "$host" = "$target"; then
+  GFORTRAN_FOR_TARGET='gfortran'
+else
+  GFORTRAN_FOR_TARGET=`echo gfortran | sed "${program_transform_name}"`
+fi
+case $GFORTRAN_FOR_TARGET in
+*' $(FLAGS_FOR_TARGET)') ;;
+*) GFORTRAN_FOR_TARGET=$GFORTRAN_FOR_TARGET' $(FLAGS_FOR_TARGET)' ;;
+esac
+
 # Don't use libstdc++-v3's flags to configure/build itself.
 libstdcxx_flags='`test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
 raw_libstdcxx_flags='-L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs'
@@ -2057,16 +2126,20 @@ qqRAW_CXX_FOR_TARGET=`echo "$qRAW_CXX_FOR_TARGET" | sed -e 's,[[$]][[$]],$$$$,g'
 # Wrap CC_FOR_TARGET and friends, for certain types of builds.
 CC_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}"
 GCJ_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}"
+GFORTRAN_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${GFORTRAN_FOR_TARGET}"
 CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}"
 RAW_CXX_FOR_TARGET="\$(STAGE_CC_WRAPPER) ${qRAW_CXX_FOR_TARGET}"
 CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}"
 RAW_CXX_FOR_TARGET_FOR_RECURSIVE_MAKE="\$(STAGE_CC_WRAPPER) ${qqRAW_CXX_FOR_TARGET}"
 
 # Makefile fragments.
-host_makefile_frag=${srcdir}/${host_makefile_frag}
-target_makefile_frag=${srcdir}/${target_makefile_frag}
-alphaieee_frag=${srcdir}/${alphaieee_frag}
-ospace_frag=${srcdir}/${ospace_frag}
+for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag;
+do
+  eval fragval=\$$frag
+  if test $fragval != /dev/null; then
+    eval $frag=${srcdir}/$fragval
+  fi
+done
 AC_SUBST_FILE(host_makefile_frag)
 AC_SUBST_FILE(target_makefile_frag)
 AC_SUBST_FILE(alphaieee_frag)
@@ -2077,7 +2150,6 @@ AC_SUBST(SET_LIB_PATH)
 AC_SUBST(RPATH_ENVVAR)
 AC_SUBST(BUILD_PREFIX)
 AC_SUBST(BUILD_PREFIX_1)
-AC_SUBST(configlinks)
 AC_SUBST(gcc_version_trigger)
 AC_SUBST(gcc_version)
 AC_SUBST(tooldir)
@@ -2088,8 +2160,7 @@ AC_SUBST(libstdcxx_incdir)
 
 # Build module lists & subconfigure args.
 AC_SUBST(build_configargs)
-AC_SUBST(configure_build_modules)
-AC_SUBST(all_build_modules)
+AC_SUBST(build_configdirs)
 
 # Host module lists & subconfigure args.
 AC_SUBST(host_configargs)
@@ -2100,11 +2171,7 @@ AC_SUBST(target_configargs)
 AC_SUBST(target_configdirs)
 
 # Build tools.
-AC_SUBST(BISON)
 AC_SUBST(CC_FOR_BUILD)
-AC_SUBST(LEX)
-AC_SUBST(MAKEINFO)
-AC_SUBST(YACC)
 AC_SUBST(config_shell)
 
 # Host tools.
@@ -2122,23 +2189,21 @@ AC_SUBST(CXX)
 AC_SUBST(CFLAGS)
 AC_SUBST(CFLAGS_FOR_BUILD)
 AC_SUBST(CXXFLAGS)
-AC_SUBST(DEFAULT_YACC)
-AC_SUBST(DEFAULT_LEX)
-AC_SUBST(DEFAULT_M4)
 
 # Target tools.
-NCN_STRICT_CHECK_TARGET_TOOL(AR_FOR_TARGET, ar)
-NCN_STRICT_CHECK_TARGET_TOOL(AS_FOR_TARGET, as)
-NCN_STRICT_CHECK_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool)
-NCN_STRICT_CHECK_TARGET_TOOL(LD_FOR_TARGET, ld)
-NCN_STRICT_CHECK_TARGET_TOOL(NM_FOR_TARGET, nm)
-NCN_STRICT_CHECK_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib, :)
-NCN_STRICT_CHECK_TARGET_TOOL(WINDRES_FOR_TARGET, windres)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_AR_FOR_TARGET, ar)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_AS_FOR_TARGET, as)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_DLLTOOL_FOR_TARGET, dlltool)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_LD_FOR_TARGET, ld)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_NM_FOR_TARGET, nm)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_RANLIB_FOR_TARGET, ranlib, :)
+NCN_STRICT_CHECK_TARGET_TOOL(CONFIGURED_WINDRES_FOR_TARGET, windres)
 
 AC_SUBST(GCC_FOR_TARGET)
 AC_SUBST(FLAGS_FOR_TARGET)
 AC_SUBST(CC_FOR_TARGET)
 AC_SUBST(GCJ_FOR_TARGET)
+AC_SUBST(GFORTRAN_FOR_TARGET)
 AC_SUBST(CXX_FOR_TARGET)
 AC_SUBST(RAW_CXX_FOR_TARGET)
 AC_SUBST(CXX_FOR_TARGET_FOR_RECURSIVE_MAKE)
@@ -2159,7 +2224,24 @@ if test "x${build}" = "x${host}" ; then
   NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)"
   RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)"
   WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)"
+else
+  # Just use the ones we found.
+  AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)"
+  AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)"
+  DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)"
+  LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)"
+  NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)"
+  RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)"
+  WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)"  
 fi
+AC_SUBST(AR_FOR_TARGET)
+AC_SUBST(AS_FOR_TARGET)
+AC_SUBST(DLLTOOL_FOR_TARGET)
+AC_SUBST(LD_FOR_TARGET)
+AC_SUBST(NM_FOR_TARGET)
+AC_SUBST(RANLIB_FOR_TARGET)
+AC_SUBST(WINDRES_FOR_TARGET)
+
 # Certain tools may need extra flags.
 AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target}
 RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target}
@@ -2184,4 +2266,87 @@ fi
 MAINT=$MAINTAINER_MODE_TRUE
 AC_SUBST(MAINT)dnl
 
+# ---------------------
+# GCC bootstrap support
+# ---------------------
+
+# Stage specific cflags for build.
+stage1_cflags="-g"
+case $build in
+  vax-*-*)
+    case ${GCC} in
+      yes) stage1_cflags="-g -Wa,-J" ;;
+      *) stage1_cflags="-g -J" ;;
+    esac ;;
+  powerpc-*-darwin*)
+    # The spiffy cpp-precomp chokes on some legitimate constructs in GCC
+    # sources; use -no-cpp-precomp to get to GNU cpp.
+    # Apple's GCC has bugs in designated initializer handling, so disable
+    # that too.
+    stage1_cflags="-g -no-cpp-precomp -DHAVE_DESIGNATED_INITIALIZERS=0"
+    ;;
+esac
+AC_SUBST(stage1_cflags)
+
+# It makes debugging easier if we create as symlinks the stage directories
+# gcc for stageN-gcc and stagePREV-gcc for stage(N-1).  In case this is not
+# possible, however, we can resort to mv.
+AC_CACHE_CHECK([if symbolic links between directories work],
+[gcc_cv_prog_ln_s_dir],
+[if test "${LN_S}" = "ln -s" \
+   && mkdir confdir.s1 \
+   && ln -s confdir.s1 confdir.s2 \
+   && echo timestamp1 > confdir.s1/conftest.1 \
+   && cmp confdir.s1/conftest.1 confdir.s2/conftest.1 \
+   && echo timestamp2 > confdir.s2/conftest.2 \
+   && cmp confdir.s1/conftest.2 confdir.s1/conftest.2 \
+   && rm -f confdir.s2; then
+  gcc_cv_prog_ln_s_dir=yes
+else
+  gcc_cv_prog_ln_s_dir=yes
+fi
+rm -rf confdir.s1 confdir.s2])
+
+case ${gcc_cv_prog_ln_s_dir} in
+  yes)
+    CREATE_LINK_TO_DIR='ln -s $$1 $$2'
+    UNDO_LINK_TO_DIR='rm -f $$1' ;;
+  *)
+    CREATE_LINK_TO_DIR='mv $$1 $$2'
+    UNDO_LINK_TO_DIR='mv $$1 $$2' ;;
+esac
+AC_SUBST(CREATE_LINK_TO_DIR)
+AC_SUBST(UNDO_LINK_TO_DIR)
+
+# Enable -Werror in bootstrap stage2 and later.
+# Change the default to "no" on release branches.
+AC_ARG_ENABLE(werror,
+[  --enable-werror         enable -Werror in bootstrap stage2 and later], [],
+[enable_werror=yes])
+case ${enable_werror} in
+  yes) stage2_werror_flag="--enable-werror-always" ;;
+  *) stage2_werror_flag="" ;;
+esac
+AC_SUBST(stage2_werror_flag)
+
+# If gcc is built natively with shared library enabled, set
+# $RPATH_ENVVAR to make sure the newly built gcc shared librares are
+# used.
+SET_GCC_LIB_PATH=
+if test -d ${srcdir}/gcc && test x${is_cross_compiler} = xno; then
+  case "${enable_shared}" in
+    no | "") ;;
+    *)
+      eval "d=\$$RPATH_ENVVAR"
+      if test x"$d" != x; then
+	d="$pwd/gcc:$d"
+      else
+	d="$pwd/gcc"
+    fi
+    SET_GCC_LIB_PATH="\$(RPATH_ENVVAR)=$d; export \$(RPATH_ENVVAR);"
+    ;;
+  esac
+fi
+AC_SUBST(SET_GCC_LIB_PATH)
+
 AC_OUTPUT(Makefile)