X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=configure.in;h=87dd2c6dc4120799eac36ec250ef42e458195e99;hb=9efb3b7baf43f7a6e9f0508d532aa3f03b5b40e9;hp=2491fa77e46de9c36fe3e53cbd2b54b9aa29c2f7;hpb=bdc57bfd91f72d40187bf2e6b881d5ad923856af;p=deliverable%2Fbinutils-gdb.git

diff --git a/configure.in b/configure.in
index 2491fa77e4..87dd2c6dc4 100644
--- a/configure.in
+++ b/configure.in
@@ -80,22 +80,6 @@ target_tools="target-examples target-groff target-gperf"
 
 ################################################################################
 
-## These two lists are of directories that are to be removed from the
-## ${configdirs} list for either cross-compilations or for native-
-## compilations.  For example, it doesn't make that much sense to
-## cross-compile Emacs, nor is it terribly useful to compile target-libiberty in
-## a native environment.  
-
-# directories to be built in the native environment only
-#
-# This must be a single line because of the way it is searched by grep in
-# the code below.
-native_only="autoconf automake libtool fileutils find gawk gettext grep gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms snavigator gnuserv target-gperf"
-
-# directories to be built in a cross environment only
-#
-cross_only="target-libgloss target-newlib target-opcodes"
-
 ## All tools belong in one of the four categories, and are assigned above
 ## We assign ${configdirs} this way to remove all embedded newlines.  This
 ## is important because configure will choke if they ever get through.
@@ -184,8 +168,12 @@ case ${with_x} in
 esac
 
 # Some tools are only suitable for building in a "native" situation.
-# Remove these if host!=target.  Similarly, some are only suitable
-# for cross toolchains; remove if host=target.
+# Remove these if host!=target.  
+native_only="autoconf automake libtool fileutils find gawk gettext grep gzip hello indent m4 rcs recode sed shellutils tar textutils uudecode wdiff gprof target-groff guile perl time ash bash bzip2 prms snavigator gnuserv target-gperf"
+
+# Similarly, some are only suitable for cross toolchains.
+# Remove these if host=target.
+cross_only="target-libgloss target-newlib target-opcodes"
 
 case $is_cross_compiler in
   no) skipdirs="${skipdirs} ${cross_only}" ;;
@@ -343,6 +331,12 @@ case "${target}" in
   arc-*-*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
+  arm-*-coff | strongarm-*-coff | xscale-*-coff)
+    noconfigdirs="$noconfigdirs ${libgcj}"
+    ;;
+  arm-*-elf* | strongarm-*-elf* | xscale-*-elf*)
+    noconfigdirs="$noconfigdirs target-libffi target-qthreads"
+    ;;
   arm-*-pe*)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
@@ -358,18 +352,6 @@ case "${target}" in
   thumb-*-oabi)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
-  strongarm-*-elf)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  strongarm-*-coff)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
-  xscale-*-elf)
-    noconfigdirs="$noconfigdirs target-libffi target-qthreads"
-    ;;
-  xscale-*-coff)
-    noconfigdirs="$noconfigdirs ${libgcj}"
-    ;;
   thumb-*-pe)
     noconfigdirs="$noconfigdirs target-libgloss ${libgcj}"
     ;;
@@ -379,7 +361,7 @@ case "${target}" in
   avr-*-*)
     noconfigdirs="$noconfigdirs target-libiberty ${libstdcxx_version} ${libgcj}"
     ;;
-  c4x-*-*)
+  c4x-*-* | tic4x-*-*)
     noconfigdirs="$noconfigdirs ${libstdcxx_version} target-libgloss ${libgcj}"
     ;;
   c54x*-*-* | tic54x-*-*)
@@ -439,10 +421,6 @@ case "${target}" in
   i[34567]86-*-freebsd*)
     noconfigdirs="$noconfigdirs target-newlib target-libgloss"
     ;;
-  s390*-*-linux*)
-    # The libffi port is not yet in the GCC tree
-    noconfigdirs="$noconfigdirs target-newlib target-libgloss ${libgcj}"
-    ;;
   i[3456]86-*-linux*)
     # This section makes it possible to build newlib natively on linux.
     # If we are using a cross compiler then don't configure newlib.
@@ -539,6 +517,9 @@ case "${target}" in
   powerpc-*-beos*)
     noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss ${libgcj}"
     ;;
+  powerpc-*-darwin*)
+    noconfigdirs="$noconfigdirs bfd binutils ld gas opcodes gdb tk itcl tix libgui gprof ${libgcj}"
+    ;;
   powerpc-*-eabi)
     noconfigdirs="$noconfigdirs ${libgcj}"
     ;;
@@ -755,8 +736,7 @@ for dir in . $skipdirs $noconfigdirs ; do
   dirname=`echo $dir | sed -e s/target-//g`
   if test $dir != .  && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"`
-    if test -r $srcdir/$dirname/configure \
-	|| test -r $srcdir/$dirname/configure.in ; then
+    if test -r $srcdir/$dirname/configure ; then
       if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 	true
       else
@@ -766,8 +746,7 @@ for dir in . $skipdirs $noconfigdirs ; do
   fi
   if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then
     target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"`
-    if test -r $srcdir/$dirname/configure \
-	|| test -r $srcdir/$dirname/configure.in ; then
+    if test -r $srcdir/$dirname/configure ; then
       if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then
 	true
       else
@@ -783,7 +762,7 @@ if test -n "${target_configdirs}" ; then
   others=
   for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do
     if test "$i" != "libiberty" ; then
-      if test -r $srcdir/$i/configure || test -r $srcdir/$i/configure.in ; then
+      if test -r $srcdir/$i/configure ; then
 	others=yes;
 	break;
       fi
@@ -1342,20 +1321,23 @@ esac
 # If --enable-shared was set, we must set LD_LIBRARY_PATH so that the
 # binutils tools will find libbfd.so.
 if test "${shared}" = "yes" ; then
-  sed -e 's/^SET_LIB_PATH[ 	]*=.*$/SET_LIB_PATH = $(REALLY_SET_LIB_PATH)/' \
-      Makefile > Makefile.tem
-  rm -f Makefile
-  mv -f Makefile.tem Makefile
-
-  case "${host}" in
-  *-*-hpux*)
-    sed -e 's/^RPATH_ENVVAR[ 	]*=.*$/RPATH_ENVVAR = SHLIB_PATH/' \
-	Makefile > Makefile.tem
-    rm -f Makefile
-    mv -f Makefile.tem Makefile
-    ;;
-  esac
+  SET_LIB_PATH="\$(REALLY_SET_LIB_PATH)"
+else
+  SET_LIB_PATH=
 fi
+sed -e "s/@SET_LIB_PATH@/${SET_LIB_PATH}/" Makefile > Makefile.tem
+rm -f Makefile
+mv -f Makefile.tem Makefile
+
+
+case "${host}" in
+  *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;;
+  *) RPATH_ENVVAR=LD_LIBRARY_PATH ;;
+esac
+sed -e "s/@RPATH_ENVVAR@/${RPATH_ENVVAR}/" Makefile > Makefile.tem
+rm -f Makefile
+mv -f Makefile.tem Makefile
+
 
 # Base args.  Strip norecursion, cache-file, srcdir, host, build, target.
 # These are the ones we might not want to pass down to subconfigures.
@@ -1556,17 +1538,17 @@ qqCXX_FOR_TARGET=`echo "$qCXX_FOR_TARGET" | sed -e 's,[$][$],$$$$,g'`
 
 sedtemp=sed.$$
 cat >$sedtemp <<EOF
-s:^TARGET_CONFIGDIRS[ 	]*=.*$:TARGET_CONFIGDIRS = ${target_configdirs}:
-s%^TARGET_CONFIGARGS[ 	]*=.*$%TARGET_CONFIGARGS = ${targargs}%
-s%^FLAGS_FOR_TARGET[ 	]*=.*$%FLAGS_FOR_TARGET = ${FLAGS_FOR_TARGET}%
-s%^CC_FOR_TARGET[ 	]*=.*$%CC_FOR_TARGET = \$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}%
-s%^GCJ_FOR_TARGET[      ]*=.*$%GCJ_FOR_TARGET = \$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}%
-s%^CXX_FOR_TARGET[ 	]*=.*$%CXX_FOR_TARGET = \$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}%
-s%^CXX_FOR_TARGET_FOR_RECURSIVE_MAKE[ 	]*=.*$%CXX_FOR_TARGET_FOR_RECURSIVE_MAKE = \$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}%
-s%^TARGET_SUBDIR[ 	]*=.*$%TARGET_SUBDIR = ${target_subdir}%
-s%^BUILD_SUBDIR[ 	]*=.*$%BUILD_SUBDIR = ${build_subdir}%
-s%^BUILD_CONFIGARGS[ 	]*=.*$%BUILD_CONFIGARGS = ${buildargs}%
-s%^gxx_include_dir[ 	]*=.*$%gxx_include_dir=${gxx_include_dir}%
+s:@target_configdirs@:${target_configdirs}:
+s%@target_configargs@%${targargs}%
+s%@FLAGS_FOR_TARGET@%${FLAGS_FOR_TARGET}%
+s%@CC_FOR_TARGET@%\$(STAGE_CC_WRAPPER) ${CC_FOR_TARGET}%
+s%@GCJ_FOR_TARGET@%\$(STAGE_CC_WRAPPER) ${GCJ_FOR_TARGET}%
+s%@CXX_FOR_TARGET@%\$(STAGE_CC_WRAPPER) ${qCXX_FOR_TARGET}%
+s%@CXX_FOR_TARGET_FOR_RECURSIVE_MAKE@%\$(STAGE_CC_WRAPPER) ${qqCXX_FOR_TARGET}%
+s%@target_subdir@%${target_subdir}%
+s%@build_subdir@%${build_subdir}%
+s%@build_configargs@%${buildargs}%
+s%@gxx_include_dir@%${gxx_include_dir}%
 EOF
 sed -f $sedtemp Makefile > Makefile.tem
 rm -f Makefile $sedtemp