X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=configure.in;h=def58c466cb051a6e3a51afc725b27deae3b520b;hb=aad3b3cbc1391fb0091d03b252bd53fbd1d2dd84;hp=785ace829b2fc6284f6ea9b5be1d957c97098510;hpb=b3ded179bb68bc7f68003ef5ade8d09a2b169651;p=deliverable%2Fbinutils-gdb.git

diff --git a/configure.in b/configure.in
index 785ace829b..def58c466c 100644
--- a/configure.in
+++ b/configure.in
@@ -305,7 +305,6 @@ AC_ARG_ENABLE(libada,
 ENABLE_LIBADA=$enableval,
 ENABLE_LIBADA=yes)
 if test "${ENABLE_LIBADA}" != "yes" ; then
-  noconfigdirs="$noconfigdirs target-libada"
   noconfigdirs="$noconfigdirs gnattools"
 fi
 
@@ -313,9 +312,6 @@ AC_ARG_ENABLE(libssp,
 [  --enable-libssp        Builds libssp directory],
 ENABLE_LIBSSP=$enableval,
 ENABLE_LIBSSP=yes)
-if test "${ENABLE_LIBSSP}" != "yes" ; then
-  noconfigdirs="$noconfigdirs target-libssp"
-fi
 
 # Set the default so we build libgcc-math for ix86 and x86_64
 AC_ARG_ENABLE(libgcc-math,
@@ -328,9 +324,6 @@ case "${target}" in
     enable_libgcc_math=no ;;
 esac
 ])
-if test "${enable_libgcc_math}" != "yes"; then
-  noconfigdirs="$noconfigdirs target-libgcc-math"
-fi
 
 # Save it here so that, even in case of --enable-libgcj, if the Java
 # front-end isn't enabled, we still get libgcj disabled.
@@ -349,14 +342,8 @@ no)
 esac
 
 
-# Allow --disable-libmudflap to exclude target-libmudflap
-case $enable_libmudflap in
-yes)
-    ;;
-no)
-    noconfigdirs="$noconfigdirs target-libmudflap"
-    ;;
-"")
+# Disable libmudflap on some systems.
+if test x$enable_libmudflap = x ; then
     case "${target}" in
     *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
         # Enable libmudflap by default in GNU and friends.
@@ -369,16 +356,10 @@ no)
 	noconfigdirs="$noconfigdirs target-libmudflap"
 	;;
     esac
-esac
+fi
 
-# Allow --disable-libgomp to exclude target-libgomp
-case $enable_libgomp in
-yes)
-    ;;
-no)
-    noconfigdirs="$noconfigdirs target-libgomp"
-    ;;
-"")
+# Disable libgomp on non POSIX hosted systems.
+if test x$enable_libgomp = x ; then
     # Enable libgomp by default on hosted POSIX systems.
     case "${target}" in
     *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu)
@@ -393,7 +374,7 @@ no)
 	noconfigdirs="$noconfigdirs target-libgomp"
 	;;
     esac
-esac
+fi
 
 
 case "${target}" in
@@ -1060,8 +1041,6 @@ if test "${build}" != "${host}" ; then
   CXX=${CXX-${host_alias}-c++}
   CXXFLAGS=${CXXFLAGS-"-g -O2"}
   CC_FOR_BUILD=${CC_FOR_BUILD-gcc}
-  BUILD_PREFIX=${build_alias}-
-  BUILD_PREFIX_1=${build_alias}-
 
 else
   # Set reasonable default values for some tools even if not Canadian.
@@ -1073,9 +1052,6 @@ else
   # This is all going to change when we autoconfiscate...
 
   CC_FOR_BUILD="\$(CC)"
-  BUILD_PREFIX=
-  BUILD_PREFIX_1=loser-
-
   AC_PROG_CC
 
   # We must set the default linker to the linker used by gcc for the correct
@@ -1342,6 +1318,14 @@ Recognised languages are: ${potential_languages}])
   ac_configure_args=`echo " $ac_configure_args" | sed -e 's/ --enable-languages=[[^ ]]*//' -e 's/$/ --enable-languages='"$enable_languages"/ `
 fi
 
+# Handle --disable-<component> generically.
+for dir in $configdirs $build_configdirs $target_configdirs ; do
+  dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g`
+  if eval test x\${enable_${dirname}} "=" xno ; then
+    noconfigdirs="$noconfigdirs $dir"
+  fi
+done
+
 # Remove the entries in $skipdirs and $noconfigdirs from $configdirs,
 # $build_configdirs and $target_configdirs.
 # If we have the source for $noconfigdirs entries, add them to $notsupp.
@@ -2160,8 +2144,6 @@ AC_SUBST_FILE(ospace_frag)
 
 # Miscellanea: directories, flags, etc.
 AC_SUBST(RPATH_ENVVAR)
-AC_SUBST(BUILD_PREFIX)
-AC_SUBST(BUILD_PREFIX_1)
 AC_SUBST(tooldir)
 AC_SUBST(build_tooldir)
 AC_SUBST(CONFIGURE_GDB_TK)
@@ -2178,7 +2160,7 @@ AC_SUBST(configdirs)
 
 # Target module lists & subconfigure args.
 AC_SUBST(target_configargs)
-AC_SUBST(target_configdirs)
+
 
 # Build tools.
 AC_SUBST(CC_FOR_BUILD)
@@ -2221,10 +2203,10 @@ case " $build_configdirs " in
   *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;;
   *)
 changequote(,)
-    # For an installed makeinfo, we require it to be from texinfo 4.2 or
+    # For an installed makeinfo, we require it to be from texinfo 4.4 or
     # higher, else we use the "missing" dummy.
     if ${MAKEINFO} --version \
-       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then
+       | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[4-9]|[5-9])' >/dev/null 2>&1; then
       :
     else
       MAKEINFO="$MISSING makeinfo"