X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=drivers%2Fnet%2Fethernet%2Fintel%2Figb%2Fe1000_defines.h;h=452219811cc3876669b586923b8281bb75f4fa91;hb=53b87ce37e19939c80aaeaa5e8702b521597ce3e;hp=31a0f82cc650b9ae1eca5940d2f939632c337dcc;hpb=31881d74b6dd1a6c530cff61248def4f2da38bee;p=deliverable%2Flinux.git

diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 31a0f82cc650..452219811cc3 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -61,20 +61,22 @@
 /* Clear Interrupt timers after IMS clear */
 /* packet buffer parity error detection enabled */
 /* descriptor FIFO parity error detection enable */
-#define E1000_CTRL_EXT_PBA_CLR        0x80000000 /* PBA Clear */
-#define E1000_I2CCMD_REG_ADDR_SHIFT   16
-#define E1000_I2CCMD_PHY_ADDR_SHIFT   24
-#define E1000_I2CCMD_OPCODE_READ      0x08000000
-#define E1000_I2CCMD_OPCODE_WRITE     0x00000000
-#define E1000_I2CCMD_READY            0x20000000
-#define E1000_I2CCMD_ERROR            0x80000000
-#define E1000_MAX_SGMII_PHY_REG_ADDR  255
-#define E1000_I2CCMD_PHY_TIMEOUT      200
-#define E1000_IVAR_VALID              0x80
-#define E1000_GPIE_NSICR              0x00000001
-#define E1000_GPIE_MSIX_MODE          0x00000010
-#define E1000_GPIE_EIAME              0x40000000
-#define E1000_GPIE_PBA                0x80000000
+#define E1000_CTRL_EXT_PBA_CLR		0x80000000 /* PBA Clear */
+#define E1000_I2CCMD_REG_ADDR_SHIFT	16
+#define E1000_I2CCMD_PHY_ADDR_SHIFT	24
+#define E1000_I2CCMD_OPCODE_READ	0x08000000
+#define E1000_I2CCMD_OPCODE_WRITE	0x00000000
+#define E1000_I2CCMD_READY		0x20000000
+#define E1000_I2CCMD_ERROR		0x80000000
+#define E1000_I2CCMD_SFP_DATA_ADDR(a)	(0x0000 + (a))
+#define E1000_I2CCMD_SFP_DIAG_ADDR(a)	(0x0100 + (a))
+#define E1000_MAX_SGMII_PHY_REG_ADDR	255
+#define E1000_I2CCMD_PHY_TIMEOUT	200
+#define E1000_IVAR_VALID		0x80
+#define E1000_GPIE_NSICR		0x00000001
+#define E1000_GPIE_MSIX_MODE		0x00000010
+#define E1000_GPIE_EIAME		0x40000000
+#define E1000_GPIE_PBA			0x80000000
 
 /* Receive Descriptor bit definitions */
 #define E1000_RXD_STAT_DD       0x01    /* Descriptor Done */
@@ -270,8 +272,10 @@
 #define AUTONEG_ADVERTISE_SPEED_DEFAULT   E1000_ALL_SPEED_DUPLEX
 
 /* LED Control */
-#define E1000_LEDCTL_LED0_MODE_SHIFT      0
-#define E1000_LEDCTL_LED0_BLINK           0x00000080
+#define E1000_LEDCTL_LED0_MODE_SHIFT	0
+#define E1000_LEDCTL_LED0_BLINK		0x00000080
+#define E1000_LEDCTL_LED0_MODE_MASK	0x0000000F
+#define E1000_LEDCTL_LED0_IVRT		0x00000040
 
 #define E1000_LEDCTL_MODE_LED_ON        0xE
 #define E1000_LEDCTL_MODE_LED_OFF       0xF
@@ -616,6 +620,7 @@
 #define E1000_EECD_SIZE_EX_SHIFT     11
 #define E1000_EECD_FLUPD_I210		0x00800000 /* Update FLASH */
 #define E1000_EECD_FLUDONE_I210		0x04000000 /* Update FLASH done*/
+#define E1000_EECD_FLASH_DETECTED_I210	0x00080000 /* FLASH detected */
 #define E1000_FLUDONE_ATTEMPTS		20000
 #define E1000_EERD_EEWR_MAX_COUNT	512 /* buffered EEPROM words rw */
 #define E1000_I210_FIFO_SEL_RX		0x00
@@ -623,6 +628,11 @@
 #define E1000_I210_FIFO_SEL_TX_LEGACY	E1000_I210_FIFO_SEL_TX_QAV(0)
 #define E1000_I210_FIFO_SEL_BMC2OS_TX	0x06
 #define E1000_I210_FIFO_SEL_BMC2OS_RX	0x01
+#define E1000_I210_FLASH_SECTOR_SIZE	0x1000 /* 4KB FLASH sector unit size */
+/* Secure FLASH mode requires removing MSb */
+#define E1000_I210_FW_PTR_MASK		0x7FFF
+/* Firmware code revision field word offset*/
+#define E1000_I210_FW_VER_OFFSET	328
 #define E1000_EECD_FLUPD_I210		0x00800000 /* Update FLASH */
 #define E1000_EECD_FLUDONE_I210		0x04000000 /* Update FLASH done*/
 #define E1000_FLUDONE_ATTEMPTS		20000