X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=drivers%2Ftty%2Fserial%2Famba-pl011.c;h=c4adecedde2c89632c41642d0637f33bacf45679;hb=bf69ff8a24358521f113b5c13f271681a74dd2a9;hp=899a77187bdead871b2e1f22ed4f320486e5288b;hpb=e75cdf9898132f521df98a3ce1c280a2f85d360a;p=deliverable%2Flinux.git diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 899a77187bde..c4adecedde2c 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -60,6 +60,8 @@ #include #include +#include "amba-pl011.h" + #define UART_NR 14 #define SERIAL_AMBA_MAJOR 204 @@ -71,8 +73,37 @@ #define UART_DR_ERROR (UART011_DR_OE|UART011_DR_BE|UART011_DR_PE|UART011_DR_FE) #define UART_DUMMY_DR_RX (1 << 16) +static u16 pl011_std_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = UART01x_DR, + [REG_ST_DMAWM] = ST_UART011_DMAWM, + [REG_ST_TIMEOUT] = ST_UART011_TIMEOUT, + [REG_FR] = UART01x_FR, + [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX, + [REG_IBRD] = UART011_IBRD, + [REG_FBRD] = UART011_FBRD, + [REG_LCRH] = UART011_LCRH, + [REG_ST_LCRH_TX] = ST_UART011_LCRH_TX, + [REG_CR] = UART011_CR, + [REG_IFLS] = UART011_IFLS, + [REG_IMSC] = UART011_IMSC, + [REG_RIS] = UART011_RIS, + [REG_MIS] = UART011_MIS, + [REG_ICR] = UART011_ICR, + [REG_DMACR] = UART011_DMACR, + [REG_ST_XFCR] = ST_UART011_XFCR, + [REG_ST_XON1] = ST_UART011_XON1, + [REG_ST_XON2] = ST_UART011_XON2, + [REG_ST_XOFF1] = ST_UART011_XOFF1, + [REG_ST_XOFF2] = ST_UART011_XOFF2, + [REG_ST_ITCR] = ST_UART011_ITCR, + [REG_ST_ITIP] = ST_UART011_ITIP, + [REG_ST_ABCR] = ST_UART011_ABCR, + [REG_ST_ABIMSC] = ST_UART011_ABIMSC, +}; + /* There is by now at least one vendor with differing details, so handle it */ struct vendor_data { + const u16 *reg_offset; unsigned int ifls; unsigned int lcrh_tx; unsigned int lcrh_rx; @@ -91,9 +122,10 @@ static unsigned int get_fifosize_arm(struct amba_device *dev) } static struct vendor_data vendor_arm = { + .reg_offset = pl011_std_offsets, .ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8, - .lcrh_tx = UART011_LCRH, - .lcrh_rx = UART011_LCRH, + .lcrh_tx = REG_LCRH, + .lcrh_rx = REG_LCRH, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -103,6 +135,7 @@ static struct vendor_data vendor_arm = { }; static struct vendor_data vendor_sbsa = { + .reg_offset = pl011_std_offsets, .oversampling = false, .dma_threshold = false, .cts_event_workaround = false, @@ -110,15 +143,44 @@ static struct vendor_data vendor_sbsa = { .fixed_options = true, }; +static u16 pl011_st_offsets[REG_ARRAY_SIZE] = { + [REG_DR] = UART01x_DR, + [REG_ST_DMAWM] = ST_UART011_DMAWM, + [REG_ST_TIMEOUT] = ST_UART011_TIMEOUT, + [REG_FR] = UART01x_FR, + [REG_ST_LCRH_RX] = ST_UART011_LCRH_RX, + [REG_IBRD] = UART011_IBRD, + [REG_FBRD] = UART011_FBRD, + [REG_LCRH] = UART011_LCRH, + [REG_ST_LCRH_TX] = ST_UART011_LCRH_TX, + [REG_CR] = UART011_CR, + [REG_IFLS] = UART011_IFLS, + [REG_IMSC] = UART011_IMSC, + [REG_RIS] = UART011_RIS, + [REG_MIS] = UART011_MIS, + [REG_ICR] = UART011_ICR, + [REG_DMACR] = UART011_DMACR, + [REG_ST_XFCR] = ST_UART011_XFCR, + [REG_ST_XON1] = ST_UART011_XON1, + [REG_ST_XON2] = ST_UART011_XON2, + [REG_ST_XOFF1] = ST_UART011_XOFF1, + [REG_ST_XOFF2] = ST_UART011_XOFF2, + [REG_ST_ITCR] = ST_UART011_ITCR, + [REG_ST_ITIP] = ST_UART011_ITIP, + [REG_ST_ABCR] = ST_UART011_ABCR, + [REG_ST_ABIMSC] = ST_UART011_ABIMSC, +}; + static unsigned int get_fifosize_st(struct amba_device *dev) { return 64; } static struct vendor_data vendor_st = { + .reg_offset = pl011_st_offsets, .ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF, - .lcrh_tx = ST_UART011_LCRH_TX, - .lcrh_rx = ST_UART011_LCRH_RX, + .lcrh_tx = REG_ST_LCRH_TX, + .lcrh_rx = REG_ST_LCRH_RX, .oversampling = true, .dma_threshold = true, .cts_event_workaround = true, @@ -162,6 +224,7 @@ struct pl011_dmatx_data { */ struct uart_amba_port { struct uart_port port; + const u16 *reg_offset; struct clk *clk; const struct vendor_data *vendor; unsigned int dmacr; /* dma control reg */ @@ -184,6 +247,24 @@ struct uart_amba_port { #endif }; +static unsigned int pl011_reg_to_offset(const struct uart_amba_port *uap, + unsigned int reg) +{ + return uap->reg_offset[reg]; +} + +static unsigned int pl011_read(const struct uart_amba_port *uap, + unsigned int reg) +{ + return readw(uap->port.membase + pl011_reg_to_offset(uap, reg)); +} + +static void pl011_write(unsigned int val, const struct uart_amba_port *uap, + unsigned int reg) +{ + writew(val, uap->port.membase + pl011_reg_to_offset(uap, reg)); +} + /* * Reads up to 256 characters from the FIFO or until it's empty and * inserts them into the TTY layer. Returns the number of characters @@ -196,13 +277,12 @@ static int pl011_fifo_to_tty(struct uart_amba_port *uap) int fifotaken = 0; while (max_count--) { - status = readw(uap->port.membase + UART01x_FR); + status = pl011_read(uap, REG_FR); if (status & UART01x_FR_RXFE) break; /* Take chars from the FIFO and update status */ - ch = readw(uap->port.membase + UART01x_DR) | - UART_DUMMY_DR_RX; + ch = pl011_read(uap, REG_DR) | UART_DUMMY_DR_RX; flag = TTY_NORMAL; uap->port.icount.rx++; fifotaken++; @@ -284,7 +364,8 @@ static void pl011_dma_probe(struct uart_amba_port *uap) struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev); struct device *dev = uap->port.dev; struct dma_slave_config tx_conf = { - .dst_addr = uap->port.mapbase + UART01x_DR, + .dst_addr = uap->port.mapbase + + pl011_reg_to_offset(uap, REG_DR), .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_MEM_TO_DEV, .dst_maxburst = uap->fifosize >> 1, @@ -339,7 +420,8 @@ static void pl011_dma_probe(struct uart_amba_port *uap) if (chan) { struct dma_slave_config rx_conf = { - .src_addr = uap->port.mapbase + UART01x_DR, + .src_addr = uap->port.mapbase + + pl011_reg_to_offset(uap, REG_DR), .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, .direction = DMA_DEV_TO_MEM, .src_maxburst = uap->fifosize >> 2, @@ -438,7 +520,7 @@ static void pl011_dma_tx_callback(void *data) dmacr = uap->dmacr; uap->dmacr = dmacr & ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); /* * If TX DMA was disabled, it means that we've stopped the DMA for @@ -552,7 +634,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) dma_dev->device_issue_pending(chan); uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); uap->dmatx.queued = true; /* @@ -588,9 +670,9 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) */ if (uap->dmatx.queued) { uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); return true; } @@ -600,7 +682,7 @@ static bool pl011_dma_tx_irq(struct uart_amba_port *uap) */ if (pl011_dma_tx_refill(uap) > 0) { uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); return true; } return false; @@ -614,7 +696,7 @@ static inline void pl011_dma_tx_stop(struct uart_amba_port *uap) { if (uap->dmatx.queued) { uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); } } @@ -640,14 +722,12 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) if (!uap->dmatx.queued) { if (pl011_dma_tx_refill(uap) > 0) { uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + - UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } else ret = false; } else if (!(uap->dmacr & UART011_TXDMAE)) { uap->dmacr |= UART011_TXDMAE; - writew(uap->dmacr, - uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); } return ret; } @@ -658,9 +738,9 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) */ dmacr = uap->dmacr; uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); - if (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) { + if (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) { /* * No space in the FIFO, so enable the transmit interrupt * so we know when there is space. Note that once we've @@ -669,13 +749,13 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap) return false; } - writew(uap->port.x_char, uap->port.membase + UART01x_DR); + pl011_write(uap->port.x_char, uap, REG_DR); uap->port.icount.tx++; uap->port.x_char = 0; /* Success - restore the DMA state */ uap->dmacr = dmacr; - writew(dmacr, uap->port.membase + UART011_DMACR); + pl011_write(dmacr, uap, REG_DMACR); return true; } @@ -703,7 +783,7 @@ __acquires(&uap->port.lock) DMA_TO_DEVICE); uap->dmatx.queued = false; uap->dmacr &= ~UART011_TXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); } } @@ -743,11 +823,11 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) dma_async_issue_pending(rxchan); uap->dmacr |= UART011_RXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); uap->dmarx.running = true; uap->im &= ~UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); return 0; } @@ -805,8 +885,8 @@ static void pl011_dma_rx_chars(struct uart_amba_port *uap, */ if (dma_count == pending && readfifo) { /* Clear any error flags */ - writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS, - uap->port.membase + UART011_ICR); + pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | + UART011_FEIS, uap, REG_ICR); /* * If we read all the DMA'd characters, and we had an @@ -854,7 +934,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) /* Disable RX DMA - incoming data will wait in the FIFO */ uap->dmacr &= ~UART011_RXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); uap->dmarx.running = false; pending = sgbuf->sg.length - state.residue; @@ -874,7 +954,7 @@ static void pl011_dma_rx_irq(struct uart_amba_port *uap) dev_dbg(uap->port.dev, "could not retrigger RX DMA job " "fall back to interrupt mode\n"); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } } @@ -922,7 +1002,7 @@ static void pl011_dma_rx_callback(void *data) dev_dbg(uap->port.dev, "could not retrigger RX DMA job " "fall back to interrupt mode\n"); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } } @@ -935,7 +1015,7 @@ static inline void pl011_dma_rx_stop(struct uart_amba_port *uap) { /* FIXME. Just disable the DMA enable */ uap->dmacr &= ~UART011_RXDMAE; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); } /* @@ -979,7 +1059,7 @@ static void pl011_dma_rx_poll(unsigned long args) spin_lock_irqsave(&uap->port.lock, flags); pl011_dma_rx_stop(uap); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); spin_unlock_irqrestore(&uap->port.lock, flags); uap->dmarx.running = false; @@ -1041,7 +1121,7 @@ static void pl011_dma_startup(struct uart_amba_port *uap) skip_rx: /* Turn on DMA error (RX/TX will be enabled on demand) */ uap->dmacr |= UART011_DMAONERR; - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); /* * ST Micro variants has some specific dma burst threshold @@ -1049,8 +1129,8 @@ skip_rx: * be issued above/below 16 bytes. */ if (uap->vendor->dma_threshold) - writew(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, - uap->port.membase + ST_UART011_DMAWM); + pl011_write(ST_UART011_DMAWM_RX_16 | ST_UART011_DMAWM_TX_16, + uap, REG_ST_DMAWM); if (uap->using_rx_dma) { if (pl011_dma_rx_trigger_dma(uap)) @@ -1075,12 +1155,12 @@ static void pl011_dma_shutdown(struct uart_amba_port *uap) return; /* Disable RX and TX DMA */ - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) + while (pl011_read(uap, REG_FR) & UART01x_FR_BUSY) barrier(); spin_lock_irq(&uap->port.lock); uap->dmacr &= ~(UART011_DMAONERR | UART011_RXDMAE | UART011_TXDMAE); - writew(uap->dmacr, uap->port.membase + UART011_DMACR); + pl011_write(uap->dmacr, uap, REG_DMACR); spin_unlock_irq(&uap->port.lock); if (uap->using_tx_dma) { @@ -1181,7 +1261,7 @@ static void pl011_stop_tx(struct uart_port *port) container_of(port, struct uart_amba_port, port); uap->im &= ~UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); pl011_dma_tx_stop(uap); } @@ -1191,7 +1271,7 @@ static void pl011_tx_chars(struct uart_amba_port *uap, bool from_irq); static void pl011_start_tx_pio(struct uart_amba_port *uap) { uap->im |= UART011_TXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); pl011_tx_chars(uap, false); } @@ -1211,7 +1291,7 @@ static void pl011_stop_rx(struct uart_port *port) uap->im &= ~(UART011_RXIM|UART011_RTIM|UART011_FEIM| UART011_PEIM|UART011_BEIM|UART011_OEIM); - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); pl011_dma_rx_stop(uap); } @@ -1222,7 +1302,7 @@ static void pl011_enable_ms(struct uart_port *port) container_of(port, struct uart_amba_port, port); uap->im |= UART011_RIMIM|UART011_CTSMIM|UART011_DCDMIM|UART011_DSRMIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } static void pl011_rx_chars(struct uart_amba_port *uap) @@ -1242,7 +1322,7 @@ __acquires(&uap->port.lock) dev_dbg(uap->port.dev, "could not trigger RX DMA job " "fall back to interrupt mode again\n"); uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); } else { #ifdef CONFIG_DMA_ENGINE /* Start Rx DMA poll */ @@ -1263,10 +1343,10 @@ static bool pl011_tx_char(struct uart_amba_port *uap, unsigned char c, bool from_irq) { if (unlikely(!from_irq) && - readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + pl011_read(uap, REG_FR) & UART01x_FR_TXFF) return false; /* unable to transmit character */ - writew(c, uap->port.membase + UART01x_DR); + pl011_write(c, uap, REG_DR); uap->port.icount.tx++; return true; @@ -1313,7 +1393,7 @@ static void pl011_modem_status(struct uart_amba_port *uap) { unsigned int status, delta; - status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY; delta = status ^ uap->old_status; uap->old_status = status; @@ -1341,15 +1421,15 @@ static void check_apply_cts_event_workaround(struct uart_amba_port *uap) return; /* workaround to make sure that all bits are unlocked.. */ - writew(0x00, uap->port.membase + UART011_ICR); + pl011_write(0x00, uap, REG_ICR); /* * WA: introduce 26ns(1 uart clk) delay before W1C; * single apb access will incur 2 pclk(133.12Mhz) delay, * so add 2 dummy reads */ - dummy_read = readw(uap->port.membase + UART011_ICR); - dummy_read = readw(uap->port.membase + UART011_ICR); + dummy_read = pl011_read(uap, REG_ICR); + dummy_read = pl011_read(uap, REG_ICR); } static irqreturn_t pl011_int(int irq, void *dev_id) @@ -1361,15 +1441,15 @@ static irqreturn_t pl011_int(int irq, void *dev_id) int handled = 0; spin_lock_irqsave(&uap->port.lock, flags); - imsc = readw(uap->port.membase + UART011_IMSC); - status = readw(uap->port.membase + UART011_RIS) & imsc; + imsc = pl011_read(uap, REG_IMSC); + status = pl011_read(uap, REG_RIS) & imsc; if (status) { do { check_apply_cts_event_workaround(uap); - writew(status & ~(UART011_TXIS|UART011_RTIS| - UART011_RXIS), - uap->port.membase + UART011_ICR); + pl011_write(status & ~(UART011_TXIS|UART011_RTIS| + UART011_RXIS), + uap, REG_ICR); if (status & (UART011_RTIS|UART011_RXIS)) { if (pl011_dma_rx_running(uap)) @@ -1386,7 +1466,7 @@ static irqreturn_t pl011_int(int irq, void *dev_id) if (pass_counter-- == 0) break; - status = readw(uap->port.membase + UART011_RIS) & imsc; + status = pl011_read(uap, REG_RIS) & imsc; } while (status != 0); handled = 1; } @@ -1400,7 +1480,7 @@ static unsigned int pl011_tx_empty(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - unsigned int status = readw(uap->port.membase + UART01x_FR); + unsigned int status = pl011_read(uap, REG_FR); return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT; } @@ -1409,7 +1489,7 @@ static unsigned int pl011_get_mctrl(struct uart_port *port) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); unsigned int result = 0; - unsigned int status = readw(uap->port.membase + UART01x_FR); + unsigned int status = pl011_read(uap, REG_FR); #define TIOCMBIT(uartbit, tiocmbit) \ if (status & uartbit) \ @@ -1429,7 +1509,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) container_of(port, struct uart_amba_port, port); unsigned int cr; - cr = readw(uap->port.membase + UART011_CR); + cr = pl011_read(uap, REG_CR); #define TIOCMBIT(tiocmbit, uartbit) \ if (mctrl & tiocmbit) \ @@ -1449,7 +1529,7 @@ static void pl011_set_mctrl(struct uart_port *port, unsigned int mctrl) } #undef TIOCMBIT - writew(cr, uap->port.membase + UART011_CR); + pl011_write(cr, uap, REG_CR); } static void pl011_break_ctl(struct uart_port *port, int break_state) @@ -1460,12 +1540,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state) unsigned int lcr_h; spin_lock_irqsave(&uap->port.lock, flags); - lcr_h = readw(uap->port.membase + uap->lcrh_tx); + lcr_h = pl011_read(uap, uap->lcrh_tx); if (break_state == -1) lcr_h |= UART01x_LCRH_BRK; else lcr_h &= ~UART01x_LCRH_BRK; - writew(lcr_h, uap->port.membase + uap->lcrh_tx); + pl011_write(lcr_h, uap, uap->lcrh_tx); spin_unlock_irqrestore(&uap->port.lock, flags); } @@ -1475,9 +1555,8 @@ static void pl011_quiesce_irqs(struct uart_port *port) { struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - unsigned char __iomem *regs = uap->port.membase; - writew(readw(regs + UART011_MIS), regs + UART011_ICR); + pl011_write(pl011_read(uap, REG_MIS), uap, REG_ICR); /* * There is no way to clear TXIM as this is "ready to transmit IRQ", so * we simply mask it. start_tx() will unmask it. @@ -1491,7 +1570,8 @@ static void pl011_quiesce_irqs(struct uart_port *port) * (including tx queue), so we're also fine with start_tx()'s caller * side. */ - writew(readw(regs + UART011_IMSC) & ~UART011_TXIM, regs + UART011_IMSC); + pl011_write(pl011_read(uap, REG_IMSC) & ~UART011_TXIM, uap, + REG_IMSC); } static int pl011_get_poll_char(struct uart_port *port) @@ -1506,11 +1586,11 @@ static int pl011_get_poll_char(struct uart_port *port) */ pl011_quiesce_irqs(port); - status = readw(uap->port.membase + UART01x_FR); + status = pl011_read(uap, REG_FR); if (status & UART01x_FR_RXFE) return NO_POLL_CHAR; - return readw(uap->port.membase + UART01x_DR); + return pl011_read(uap, REG_DR); } static void pl011_put_poll_char(struct uart_port *port, @@ -1519,10 +1599,10 @@ static void pl011_put_poll_char(struct uart_port *port, struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) barrier(); - writew(ch, uap->port.membase + UART01x_DR); + pl011_write(ch, uap, REG_DR); } #endif /* CONFIG_CONSOLE_POLL */ @@ -1546,15 +1626,16 @@ static int pl011_hwinit(struct uart_port *port) uap->port.uartclk = clk_get_rate(uap->clk); /* Clear pending error and receive interrupts */ - writew(UART011_OEIS | UART011_BEIS | UART011_PEIS | UART011_FEIS | - UART011_RTIS | UART011_RXIS, uap->port.membase + UART011_ICR); + pl011_write(UART011_OEIS | UART011_BEIS | UART011_PEIS | + UART011_FEIS | UART011_RTIS | UART011_RXIS, + uap, REG_ICR); /* * Save interrupts enable mask, and enable RX interrupts in case if * the interrupt is used for NMI entry. */ - uap->im = readw(uap->port.membase + UART011_IMSC); - writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC); + uap->im = pl011_read(uap, REG_IMSC); + pl011_write(UART011_RTIM | UART011_RXIM, uap, REG_IMSC); if (dev_get_platdata(uap->port.dev)) { struct amba_pl011_data *plat; @@ -1566,24 +1647,30 @@ static int pl011_hwinit(struct uart_port *port) return 0; } +static bool pl011_split_lcrh(const struct uart_amba_port *uap) +{ + return pl011_reg_to_offset(uap, uap->lcrh_rx) != + pl011_reg_to_offset(uap, uap->lcrh_tx); +} + static void pl011_write_lcr_h(struct uart_amba_port *uap, unsigned int lcr_h) { - writew(lcr_h, uap->port.membase + uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) { + pl011_write(lcr_h, uap, uap->lcrh_rx); + if (pl011_split_lcrh(uap)) { int i; /* * Wait 10 PCLKs before writing LCRH_TX register, * to get this delay write read only register 10 times */ for (i = 0; i < 10; ++i) - writew(0xff, uap->port.membase + UART011_MIS); - writew(lcr_h, uap->port.membase + uap->lcrh_tx); + pl011_write(0xff, uap, REG_MIS); + pl011_write(lcr_h, uap, uap->lcrh_tx); } } static int pl011_allocate_irq(struct uart_amba_port *uap) { - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); return request_irq(uap->port.irq, pl011_int, 0, "uart-pl011", uap); } @@ -1598,12 +1685,11 @@ static void pl011_enable_interrupts(struct uart_amba_port *uap) spin_lock_irq(&uap->port.lock); /* Clear out any spuriously appearing RX interrupts */ - writew(UART011_RTIS | UART011_RXIS, - uap->port.membase + UART011_ICR); + pl011_write(UART011_RTIS | UART011_RXIS, uap, REG_ICR); uap->im = UART011_RTIM; if (!pl011_dma_rx_running(uap)) uap->im |= UART011_RXIM; - writew(uap->im, uap->port.membase + UART011_IMSC); + pl011_write(uap->im, uap, REG_IMSC); spin_unlock_irq(&uap->port.lock); } @@ -1622,21 +1708,21 @@ static int pl011_startup(struct uart_port *port) if (retval) goto clk_dis; - writew(uap->vendor->ifls, uap->port.membase + UART011_IFLS); + pl011_write(uap->vendor->ifls, uap, REG_IFLS); spin_lock_irq(&uap->port.lock); /* restore RTS and DTR */ cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; - writew(cr, uap->port.membase + UART011_CR); + pl011_write(cr, uap, REG_CR); spin_unlock_irq(&uap->port.lock); /* * initialise the old status of the modem signals */ - uap->old_status = readw(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY; + uap->old_status = pl011_read(uap, REG_FR) & UART01x_FR_MODEM_ANY; /* Startup DMA */ pl011_dma_startup(uap); @@ -1677,9 +1763,9 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap, { unsigned long val; - val = readw(uap->port.membase + lcrh); + val = pl011_read(uap, lcrh); val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN); - writew(val, uap->port.membase + lcrh); + pl011_write(val, uap, lcrh); } /* @@ -1693,18 +1779,18 @@ static void pl011_disable_uart(struct uart_amba_port *uap) uap->autorts = false; spin_lock_irq(&uap->port.lock); - cr = readw(uap->port.membase + UART011_CR); + cr = pl011_read(uap, REG_CR); uap->old_cr = cr; cr &= UART011_CR_RTS | UART011_CR_DTR; cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - writew(cr, uap->port.membase + UART011_CR); + pl011_write(cr, uap, REG_CR); spin_unlock_irq(&uap->port.lock); /* * disable break condition and fifos */ pl011_shutdown_channel(uap, uap->lcrh_rx); - if (uap->lcrh_rx != uap->lcrh_tx) + if (pl011_split_lcrh(uap)) pl011_shutdown_channel(uap, uap->lcrh_tx); } @@ -1714,8 +1800,8 @@ static void pl011_disable_interrupts(struct uart_amba_port *uap) /* mask all interrupts and clear all pending ones */ uap->im = 0; - writew(uap->im, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); + pl011_write(uap->im, uap, REG_IMSC); + pl011_write(0xffff, uap, REG_ICR); spin_unlock_irq(&uap->port.lock); } @@ -1867,8 +1953,8 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, pl011_enable_ms(port); /* first, disable everything */ - old_cr = readw(port->membase + UART011_CR); - writew(0, port->membase + UART011_CR); + old_cr = pl011_read(uap, REG_CR); + pl011_write(0, uap, REG_CR); if (termios->c_cflag & CRTSCTS) { if (old_cr & UART011_CR_RTS) @@ -1901,17 +1987,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios, quot -= 2; } /* Set baud rate */ - writew(quot & 0x3f, port->membase + UART011_FBRD); - writew(quot >> 6, port->membase + UART011_IBRD); + pl011_write(quot & 0x3f, uap, REG_FBRD); + pl011_write(quot >> 6, uap, REG_IBRD); /* * ----------v----------v----------v----------v----- * NOTE: lcrh_tx and lcrh_rx MUST BE WRITTEN AFTER - * UART011_FBRD & UART011_IBRD. + * REG_FBRD & REG_IBRD. * ----------^----------^----------^----------^----- */ pl011_write_lcr_h(uap, lcr_h); - writew(old_cr, port->membase + UART011_CR); + pl011_write(old_cr, uap, REG_CR); spin_unlock_irqrestore(&port->lock, flags); } @@ -2052,9 +2138,9 @@ static void pl011_console_putchar(struct uart_port *port, int ch) struct uart_amba_port *uap = container_of(port, struct uart_amba_port, port); - while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_TXFF) + while (pl011_read(uap, REG_FR) & UART01x_FR_TXFF) barrier(); - writew(ch, uap->port.membase + UART01x_DR); + pl011_write(ch, uap, REG_DR); } static void @@ -2079,10 +2165,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) * First save the CR then disable the interrupts */ if (!uap->vendor->always_enabled) { - old_cr = readw(uap->port.membase + UART011_CR); + old_cr = pl011_read(uap, REG_CR); new_cr = old_cr & ~UART011_CR_CTSEN; new_cr |= UART01x_CR_UARTEN | UART011_CR_TXE; - writew(new_cr, uap->port.membase + UART011_CR); + pl011_write(new_cr, uap, REG_CR); } uart_console_write(&uap->port, s, count, pl011_console_putchar); @@ -2092,10 +2178,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) * and restore the TCR */ do { - status = readw(uap->port.membase + UART01x_FR); + status = pl011_read(uap, REG_FR); } while (status & UART01x_FR_BUSY); if (!uap->vendor->always_enabled) - writew(old_cr, uap->port.membase + UART011_CR); + pl011_write(old_cr, uap, REG_CR); if (locked) spin_unlock(&uap->port.lock); @@ -2108,10 +2194,10 @@ static void __init pl011_console_get_options(struct uart_amba_port *uap, int *baud, int *parity, int *bits) { - if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) { + if (pl011_read(uap, REG_CR) & UART01x_CR_UARTEN) { unsigned int lcr_h, ibrd, fbrd; - lcr_h = readw(uap->port.membase + uap->lcrh_tx); + lcr_h = pl011_read(uap, uap->lcrh_tx); *parity = 'n'; if (lcr_h & UART01x_LCRH_PEN) { @@ -2126,13 +2212,13 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud, else *bits = 8; - ibrd = readw(uap->port.membase + UART011_IBRD); - fbrd = readw(uap->port.membase + UART011_FBRD); + ibrd = pl011_read(uap, REG_IBRD); + fbrd = pl011_read(uap, REG_FBRD); *baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd); if (uap->vendor->oversampling) { - if (readw(uap->port.membase + UART011_CR) + if (pl011_read(uap, REG_CR) & ST_UART011_CR_OVSFACT) *baud *= 2; } @@ -2204,10 +2290,10 @@ static struct console amba_console = { static void pl011_putc(struct uart_port *port, int c) { - while (readl(port->membase + UART01x_FR) & UART01x_FR_TXFF) + while (readl(port->membase + REG_FR) & UART01x_FR_TXFF) ; - writeb(c, port->membase + UART01x_DR); - while (readl(port->membase + UART01x_FR) & UART01x_FR_BUSY) + writeb(c, port->membase + REG_DR); + while (readl(port->membase + REG_FR) & UART01x_FR_BUSY) ; } @@ -2334,8 +2420,8 @@ static int pl011_register_port(struct uart_amba_port *uap) int ret; /* Ensure interrupts from this UART are masked and cleared */ - writew(0, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); + pl011_write(0, uap, REG_IMSC); + pl011_write(0xffff, uap, REG_ICR); if (!amba_reg.state) { ret = uart_register_driver(&amba_reg); @@ -2372,6 +2458,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) if (IS_ERR(uap->clk)) return PTR_ERR(uap->clk); + uap->reg_offset = vendor->reg_offset; uap->vendor = vendor; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; @@ -2453,6 +2540,7 @@ static int sbsa_uart_probe(struct platform_device *pdev) if (!uap) return -ENOMEM; + uap->reg_offset = vendor_sbsa.reg_offset; uap->vendor = &vendor_sbsa; uap->fifosize = 32; uap->port.irq = platform_get_irq(pdev, 0);