X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=gas%2Fconfig%2Ftc-sh.c;h=3390a409585bdb7b67dff75e657ce4c61c26196e;hb=39d911fc3c6519799ca1af4365d4b56f9d71ca94;hp=ee4058456e83dbaa59855081444a57976a4eb012;hpb=bc805888417f16602aeb4bfd3f6e33d32ffcae24;p=deliverable%2Fbinutils-gdb.git diff --git a/gas/config/tc-sh.c b/gas/config/tc-sh.c index ee4058456e..3390a40958 100644 --- a/gas/config/tc-sh.c +++ b/gas/config/tc-sh.c @@ -1,11 +1,11 @@ -/* tc-sh.c -- Assemble code for the Hitachi Super-H - Copyright (C) 1993, 94, 95, 96, 97, 98, 99, 2000 Free Software Foundation. +/* tc-sh.c -- Assemble code for the Renesas / SuperH SH + Copyright (C) 1993-2016 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) + the Free Software Foundation; either version 3, or (at your option) any later version. GAS is distributed in the hope that it will be useful, @@ -15,18 +15,16 @@ You should have received a copy of the GNU General Public License along with GAS; see the file COPYING. If not, write to - the Free Software Foundation, 59 Temple Place - Suite 330, - Boston, MA 02111-1307, USA. */ + the Free Software Foundation, 51 Franklin Street - Fifth Floor, + Boston, MA 02110-1301, USA. */ /* Written By Steve Chamberlain */ -#include #include "as.h" -#include "bfd.h" #include "subsegs.h" #define DEFINE_TABLE #include "opcodes/sh-opc.h" -#include +#include "safe-ctype.h" #include "struc-symbol.h" #ifdef OBJ_ELF @@ -34,35 +32,46 @@ #endif #include "dwarf2dbg.h" +#include "dw2gencfi.h" + +typedef struct + { + sh_arg_type type; + int reg; + expressionS immediate; + } +sh_operand_info; const char comment_chars[] = "!"; const char line_separator_chars[] = ";"; const char line_comment_chars[] = "!#"; -static void s_uses PARAMS ((int)); - -static void sh_count_relocs PARAMS ((bfd *, segT, PTR)); -static void sh_frob_section PARAMS ((bfd *, segT, PTR)); - -void cons (); -void s_align_bytes (); -static void s_uacons PARAMS ((int)); -static sh_opcode_info *find_cooked_opcode PARAMS ((char **)); -static unsigned int assemble_ppi PARAMS ((char *, sh_opcode_info *)); +static void s_uses (int); +static void s_uacons (int); #ifdef OBJ_ELF -static void sh_elf_cons PARAMS ((int)); +static void sh_elf_cons (int); symbolS *GOT_symbol; /* Pre-defined "_GLOBAL_OFFSET_TABLE_" */ #endif -int shl = 0; +static void +big (int ignore ATTRIBUTE_UNUSED) +{ + if (! target_big_endian) + as_bad (_("directive .big encountered when option -big required")); + + /* Stop further messages. */ + target_big_endian = 1; +} static void -little (ignore) - int ignore ATTRIBUTE_UNUSED; +little (int ignore ATTRIBUTE_UNUSED) { - shl = 1; + if (target_big_endian) + as_bad (_("directive .little encountered when option -little required")); + + /* Stop further messages. */ target_big_endian = 0; } @@ -83,6 +92,7 @@ const pseudo_typeS md_pseudo_table[] = {"int", cons, 4}, {"word", cons, 2}, #endif /* OBJ_ELF */ + {"big", big, 0}, {"form", listing_psize, 0}, {"little", little, 0}, {"heading", listing_title, 0}, @@ -92,26 +102,51 @@ const pseudo_typeS md_pseudo_table[] = {"uses", s_uses, 0}, {"uaword", s_uacons, 2}, {"ualong", s_uacons, 4}, - { "file", dwarf2_directive_file, 0 }, - { "loc", dwarf2_directive_loc, 0 }, + {"uaquad", s_uacons, 8}, + {"2byte", s_uacons, 2}, + {"4byte", s_uacons, 4}, + {"8byte", s_uacons, 8}, +#ifdef HAVE_SH64 + {"mode", s_sh64_mode, 0 }, + + /* Have the old name too. */ + {"isa", s_sh64_mode, 0 }, + + /* Assert that the right ABI is used. */ + {"abi", s_sh64_abi, 0 }, + + { "vtable_inherit", sh64_vtable_inherit, 0 }, + { "vtable_entry", sh64_vtable_entry, 0 }, +#endif /* HAVE_SH64 */ {0, 0, 0} }; -/*int md_reloc_size; */ - int sh_relax; /* set if -relax seen */ /* Whether -small was seen. */ int sh_small; -/* Whether -dsp was seen. */ +/* Flag to generate relocations against symbol values for local symbols. */ + +static int dont_adjust_reloc_32; + +/* Flag to indicate that '$' is allowed as a register prefix. */ + +static int allow_dollar_register_prefix; -static int sh_dsp; +/* Preset architecture set, if given; zero otherwise. */ + +static unsigned int preset_target_arch; /* The bit mask of architectures that could - accomodate the insns seen so far. */ -static int valid_arch; + accommodate the insns seen so far. */ +static unsigned int valid_arch; + +#ifdef OBJ_ELF +/* Whether --fdpic was given. */ +static int sh_fdpic; +#endif const char EXP_CHARS[] = "eE"; @@ -125,23 +160,65 @@ const char FLT_CHARS[] = "rRsSfFdDxXpP"; #define ENCODE_RELAX(what,length) (((what) << 4) + (length)) #define GET_WHAT(x) ((x>>4)) -/* These are the three types of relaxable instrction. */ +/* These are the three types of relaxable instruction. */ +/* These are the types of relaxable instructions; except for END which is + a marker. */ #define COND_JUMP 1 #define COND_JUMP_DELAY 2 #define UNCOND_JUMP 3 + +#ifdef HAVE_SH64 + +/* A 16-bit (times four) pc-relative operand, at most expanded to 32 bits. */ +#define SH64PCREL16_32 4 +/* A 16-bit (times four) pc-relative operand, at most expanded to 64 bits. */ +#define SH64PCREL16_64 5 + +/* Variants of the above for adjusting the insn to PTA or PTB according to + the label. */ +#define SH64PCREL16PT_32 6 +#define SH64PCREL16PT_64 7 + +/* A MOVI expansion, expanding to at most 32 or 64 bits. */ +#define MOVI_IMM_32 8 +#define MOVI_IMM_32_PCREL 9 +#define MOVI_IMM_64 10 +#define MOVI_IMM_64_PCREL 11 +#define END 12 + +#else /* HAVE_SH64 */ + #define END 4 +#endif /* HAVE_SH64 */ + #define UNDEF_DISP 0 #define COND8 1 #define COND12 2 #define COND32 3 -#define UNCOND12 1 -#define UNCOND32 2 #define UNDEF_WORD_DISP 4 #define UNCOND12 1 #define UNCOND32 2 +#ifdef HAVE_SH64 +#define UNDEF_SH64PCREL 0 +#define SH64PCREL16 1 +#define SH64PCREL32 2 +#define SH64PCREL48 3 +#define SH64PCREL64 4 +#define SH64PCRELPLT 5 + +#define UNDEF_MOVI 0 +#define MOVI_16 1 +#define MOVI_32 2 +#define MOVI_48 3 +#define MOVI_64 4 +#define MOVI_PLT 5 +#define MOVI_GOTOFF 6 +#define MOVI_GOTPC 7 +#endif /* HAVE_SH64 */ + /* Branch displacements are from the address of the branch plus four, thus all minimum and maximum values have 4 added to them. */ #define COND8_F 258 @@ -172,6 +249,85 @@ const char FLT_CHARS[] = "rRsSfFdDxXpP"; #define UNCOND32_M -(1<<30) #define UNCOND32_LENGTH 14 +#ifdef HAVE_SH64 +/* The trivial expansion of a SH64PCREL16 relaxation is just a "PT label, + TRd" as is the current insn, so no extra length. Note that the "reach" + is calculated from the address *after* that insn, but the offset in the + insn is calculated from the beginning of the insn. We also need to + take into account the implicit 1 coded as the "A" in PTA when counting + forward. If PTB reaches an odd address, we trap that as an error + elsewhere, so we don't have to have different relaxation entries. We + don't add a one to the negative range, since PTB would then have the + farthest backward-reaching value skipped, not generated at relaxation. */ +#define SH64PCREL16_F (32767 * 4 - 4 + 1) +#define SH64PCREL16_M (-32768 * 4 - 4) +#define SH64PCREL16_LENGTH 0 + +/* The next step is to change that PT insn into + MOVI ((label - datalabel Ln) >> 16) & 65535, R25 + SHORI (label - datalabel Ln) & 65535, R25 + Ln: + PTREL R25,TRd + which means two extra insns, 8 extra bytes. This is the limit for the + 32-bit ABI. + + The expressions look a bit bad since we have to adjust this to avoid overflow on a + 32-bit host. */ +#define SH64PCREL32_F ((((long) 1 << 30) - 1) * 2 + 1 - 4) +#define SH64PCREL32_LENGTH (2 * 4) + +/* Similarly, we just change the MOVI and add a SHORI for the 48-bit + expansion. */ +#if BFD_HOST_64BIT_LONG +/* The "reach" type is long, so we can only do this for a 64-bit-long + host. */ +#define SH64PCREL32_M ((-((long) 1 << 30)) * 2 - 4) +#define SH64PCREL48_F ((((long) 1 << 47) - 1) - 4) +#define SH64PCREL48_M ((-((long) 1 << 47)) - 4) +#define SH64PCREL48_LENGTH (3 * 4) +#else +/* If the host does not have 64-bit longs, just make this state identical + in reach to the 32-bit state. Note that we have a slightly incorrect + reach, but the correct one above will overflow a 32-bit number. */ +#define SH64PCREL32_M ((-((long) 1 << 30)) * 2) +#define SH64PCREL48_F SH64PCREL32_F +#define SH64PCREL48_M SH64PCREL32_M +#define SH64PCREL48_LENGTH (3 * 4) +#endif /* BFD_HOST_64BIT_LONG */ + +/* And similarly for the 64-bit expansion; a MOVI + SHORI + SHORI + SHORI + + PTREL sequence. */ +#define SH64PCREL64_LENGTH (4 * 4) + +/* For MOVI, we make the MOVI + SHORI... expansion you can see in the + SH64PCREL expansions. The PCREL one is similar, but the other has no + pc-relative reach; it must be fully expanded in + shmedia_md_estimate_size_before_relax. */ +#define MOVI_16_LENGTH 0 +#define MOVI_16_F (32767 - 4) +#define MOVI_16_M (-32768 - 4) +#define MOVI_32_LENGTH 4 +#define MOVI_32_F ((((long) 1 << 30) - 1) * 2 + 1 - 4) +#define MOVI_48_LENGTH 8 + +#if BFD_HOST_64BIT_LONG +/* The "reach" type is long, so we can only do this for a 64-bit-long + host. */ +#define MOVI_32_M ((-((long) 1 << 30)) * 2 - 4) +#define MOVI_48_F ((((long) 1 << 47) - 1) - 4) +#define MOVI_48_M ((-((long) 1 << 47)) - 4) +#else +/* If the host does not have 64-bit longs, just make this state identical + in reach to the 32-bit state. Note that we have a slightly incorrect + reach, but the correct one above will overflow a 32-bit number. */ +#define MOVI_32_M ((-((long) 1 << 30)) * 2) +#define MOVI_48_F MOVI_32_F +#define MOVI_48_M MOVI_32_M +#endif /* BFD_HOST_64BIT_LONG */ + +#define MOVI_64_LENGTH 12 +#endif /* HAVE_SH64 */ + #define EMPTY { 0, 0, 0, 0 } const relax_typeS md_relax_table[C (END, 0)] = { @@ -185,7 +341,9 @@ const relax_typeS md_relax_table[C (END, 0)] = { { COND12_F, COND12_M, COND12_LENGTH, C (COND_JUMP, COND32), }, /* C (COND_JUMP, COND32) */ { COND32_F, COND32_M, COND32_LENGTH, 0, }, - EMPTY, EMPTY, EMPTY, EMPTY, + /* C (COND_JUMP, UNDEF_WORD_DISP) */ + { 0, 0, COND32_LENGTH, 0, }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, @@ -195,7 +353,9 @@ const relax_typeS md_relax_table[C (END, 0)] = { { COND12_F, COND12_M, COND12_DELAY_LENGTH, C (COND_JUMP_DELAY, COND32), }, /* C (COND_JUMP_DELAY, COND32) */ { COND32_F, COND32_M, COND32_LENGTH, 0, }, - EMPTY, EMPTY, EMPTY, EMPTY, + /* C (COND_JUMP_DELAY, UNDEF_WORD_DISP) */ + { 0, 0, COND32_LENGTH, 0, }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, @@ -203,8 +363,123 @@ const relax_typeS md_relax_table[C (END, 0)] = { { UNCOND12_F, UNCOND12_M, UNCOND12_LENGTH, C (UNCOND_JUMP, UNCOND32), }, /* C (UNCOND_JUMP, UNCOND32) */ { UNCOND32_F, UNCOND32_M, UNCOND32_LENGTH, 0, }, - EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + EMPTY, + /* C (UNCOND_JUMP, UNDEF_WORD_DISP) */ + { 0, 0, UNCOND32_LENGTH, 0, }, + EMPTY, EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + +#ifdef HAVE_SH64 + /* C (SH64PCREL16_32, SH64PCREL16) */ + EMPTY, + { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16_32, SH64PCREL32) }, + /* C (SH64PCREL16_32, SH64PCREL32) */ + { 0, 0, SH64PCREL32_LENGTH, 0 }, + EMPTY, EMPTY, + /* C (SH64PCREL16_32, SH64PCRELPLT) */ + { 0, 0, SH64PCREL32_LENGTH, 0 }, + EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (SH64PCREL16_64, SH64PCREL16) */ + EMPTY, + { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16_64, SH64PCREL32) }, + /* C (SH64PCREL16_64, SH64PCREL32) */ + { SH64PCREL32_F, SH64PCREL32_M, SH64PCREL32_LENGTH, C (SH64PCREL16_64, SH64PCREL48) }, + /* C (SH64PCREL16_64, SH64PCREL48) */ + { SH64PCREL48_F, SH64PCREL48_M, SH64PCREL48_LENGTH, C (SH64PCREL16_64, SH64PCREL64) }, + /* C (SH64PCREL16_64, SH64PCREL64) */ + { 0, 0, SH64PCREL64_LENGTH, 0 }, + /* C (SH64PCREL16_64, SH64PCRELPLT) */ + { 0, 0, SH64PCREL64_LENGTH, 0 }, + EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (SH64PCREL16PT_32, SH64PCREL16) */ + EMPTY, + { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16PT_32, SH64PCREL32) }, + /* C (SH64PCREL16PT_32, SH64PCREL32) */ + { 0, 0, SH64PCREL32_LENGTH, 0 }, + EMPTY, EMPTY, + /* C (SH64PCREL16PT_32, SH64PCRELPLT) */ + { 0, 0, SH64PCREL32_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (SH64PCREL16PT_64, SH64PCREL16) */ + EMPTY, + { SH64PCREL16_F, SH64PCREL16_M, SH64PCREL16_LENGTH, C (SH64PCREL16PT_64, SH64PCREL32) }, + /* C (SH64PCREL16PT_64, SH64PCREL32) */ + { SH64PCREL32_F, + SH64PCREL32_M, + SH64PCREL32_LENGTH, + C (SH64PCREL16PT_64, SH64PCREL48) }, + /* C (SH64PCREL16PT_64, SH64PCREL48) */ + { SH64PCREL48_F, SH64PCREL48_M, SH64PCREL48_LENGTH, C (SH64PCREL16PT_64, SH64PCREL64) }, + /* C (SH64PCREL16PT_64, SH64PCREL64) */ + { 0, 0, SH64PCREL64_LENGTH, 0 }, + /* C (SH64PCREL16PT_64, SH64PCRELPLT) */ + { 0, 0, SH64PCREL64_LENGTH, 0}, + EMPTY, EMPTY, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (MOVI_IMM_32, UNDEF_MOVI) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + /* C (MOVI_IMM_32, MOVI_16) */ + { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_32, MOVI_32) }, + /* C (MOVI_IMM_32, MOVI_32) */ + { MOVI_32_F, MOVI_32_M, MOVI_32_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, + /* C (MOVI_IMM_32, MOVI_GOTOFF) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (MOVI_IMM_32_PCREL, MOVI_16) */ + EMPTY, + { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_32_PCREL, MOVI_32) }, + /* C (MOVI_IMM_32_PCREL, MOVI_32) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + EMPTY, EMPTY, + /* C (MOVI_IMM_32_PCREL, MOVI_PLT) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + EMPTY, + /* C (MOVI_IMM_32_PCREL, MOVI_GOTPC) */ + { 0, 0, MOVI_32_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (MOVI_IMM_64, UNDEF_MOVI) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + /* C (MOVI_IMM_64, MOVI_16) */ + { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_64, MOVI_32) }, + /* C (MOVI_IMM_64, MOVI_32) */ + { MOVI_32_F, MOVI_32_M, MOVI_32_LENGTH, C (MOVI_IMM_64, MOVI_48) }, + /* C (MOVI_IMM_64, MOVI_48) */ + { MOVI_48_F, MOVI_48_M, MOVI_48_LENGTH, C (MOVI_IMM_64, MOVI_64) }, + /* C (MOVI_IMM_64, MOVI_64) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + EMPTY, + /* C (MOVI_IMM_64, MOVI_GOTOFF) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + + /* C (MOVI_IMM_64_PCREL, MOVI_16) */ + EMPTY, + { MOVI_16_F, MOVI_16_M, MOVI_16_LENGTH, C (MOVI_IMM_64_PCREL, MOVI_32) }, + /* C (MOVI_IMM_64_PCREL, MOVI_32) */ + { MOVI_32_F, MOVI_32_M, MOVI_32_LENGTH, C (MOVI_IMM_64_PCREL, MOVI_48) }, + /* C (MOVI_IMM_64_PCREL, MOVI_48) */ + { MOVI_48_F, MOVI_48_M, MOVI_48_LENGTH, C (MOVI_IMM_64_PCREL, MOVI_64) }, + /* C (MOVI_IMM_64_PCREL, MOVI_64) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + /* C (MOVI_IMM_64_PCREL, MOVI_PLT) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + EMPTY, + /* C (MOVI_IMM_64_PCREL, MOVI_GOTPC) */ + { 0, 0, MOVI_64_LENGTH, 0 }, + EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, EMPTY, + +#endif /* HAVE_SH64 */ + }; #undef EMPTY @@ -213,92 +488,342 @@ static struct hash_control *opcode_hash_control; /* Opcode mnemonics */ #ifdef OBJ_ELF -/* Parse @got, etc. and return the desired relocation. - If we have additional arithmetic expression, then we fill in new_exp_p. */ -static bfd_reloc_code_real_type -sh_elf_suffix (str_p, exp_p, new_exp_p) - char **str_p; - expressionS *exp_p, *new_exp_p; +/* Determinet whether the symbol needs any kind of PIC relocation. */ + +inline static int +sh_PIC_related_p (symbolS *sym) { - struct map_bfd { - char *string; - int length; - bfd_reloc_code_real_type reloc; - }; + expressionS *exp; - char ident[20]; - char *str = *str_p; - char *str2; - int ch; - int len; - struct map_bfd *ptr; + if (! sym) + return 0; + + if (sym == GOT_symbol) + return 1; + +#ifdef HAVE_SH64 + if (sh_PIC_related_p (*symbol_get_tc (sym))) + return 1; +#endif + + exp = symbol_get_value_expression (sym); + + return (exp->X_op == O_PIC_reloc + || sh_PIC_related_p (exp->X_add_symbol) + || sh_PIC_related_p (exp->X_op_symbol)); +} + +/* Determine the relocation type to be used to represent the + expression, that may be rearranged. */ + +static int +sh_check_fixup (expressionS *main_exp, bfd_reloc_code_real_type *r_type_p) +{ + expressionS *exp = main_exp; -#define MAP(str,reloc) { str, sizeof (str)-1, reloc } + /* This is here for backward-compatibility only. GCC used to generated: - static struct map_bfd mapping[] = { - MAP ("got", BFD_RELOC_32_GOT_PCREL), - MAP ("plt", BFD_RELOC_32_PLT_PCREL), - MAP ("gotoff", BFD_RELOC_32_GOTOFF), - { (char *)0, 0, BFD_RELOC_UNUSED } - }; + f@PLT + . - (.LPCS# + 2) - if (*str++ != '@') - return BFD_RELOC_UNUSED; + but we'd rather be able to handle this as a PIC-related reference + plus/minus a symbol. However, gas' parser gives us: - for (ch = *str, str2 = ident; - (str2 < ident + sizeof (ident) - 1 - && (isalnum (ch) || ch == '@')); - ch = *++str) + O_subtract (O_add (f@PLT, .), .LPCS#+2) + + so we attempt to transform this into: + + O_subtract (f@PLT, O_subtract (.LPCS#+2, .)) + + which we can handle simply below. */ + if (exp->X_op == O_subtract) { - *str2++ = (islower (ch)) ? ch : tolower (ch); + if (sh_PIC_related_p (exp->X_op_symbol)) + return 1; + + exp = symbol_get_value_expression (exp->X_add_symbol); + + if (exp && sh_PIC_related_p (exp->X_op_symbol)) + return 1; + + if (exp && exp->X_op == O_add + && sh_PIC_related_p (exp->X_add_symbol)) + { + symbolS *sym = exp->X_add_symbol; + + exp->X_op = O_subtract; + exp->X_add_symbol = main_exp->X_op_symbol; + + main_exp->X_op_symbol = main_exp->X_add_symbol; + main_exp->X_add_symbol = sym; + + main_exp->X_add_number += exp->X_add_number; + exp->X_add_number = 0; + } + + exp = main_exp; } + else if (exp->X_op == O_add && sh_PIC_related_p (exp->X_op_symbol)) + return 1; - *str2 = '\0'; - len = str2 - ident; + if (exp->X_op == O_symbol || exp->X_op == O_add || exp->X_op == O_subtract) + { +#ifdef HAVE_SH64 + if (exp->X_add_symbol + && (exp->X_add_symbol == GOT_symbol + || (GOT_symbol + && *symbol_get_tc (exp->X_add_symbol) == GOT_symbol))) + { + switch (*r_type_p) + { + case BFD_RELOC_SH_IMM_LOW16: + *r_type_p = BFD_RELOC_SH_GOTPC_LOW16; + break; + + case BFD_RELOC_SH_IMM_MEDLOW16: + *r_type_p = BFD_RELOC_SH_GOTPC_MEDLOW16; + break; + + case BFD_RELOC_SH_IMM_MEDHI16: + *r_type_p = BFD_RELOC_SH_GOTPC_MEDHI16; + break; + + case BFD_RELOC_SH_IMM_HI16: + *r_type_p = BFD_RELOC_SH_GOTPC_HI16; + break; + + case BFD_RELOC_NONE: + case BFD_RELOC_UNUSED: + *r_type_p = BFD_RELOC_SH_GOTPC; + break; + + default: + abort (); + } + return 0; + } +#else + if (exp->X_add_symbol && exp->X_add_symbol == GOT_symbol) + { + *r_type_p = BFD_RELOC_SH_GOTPC; + return 0; + } +#endif + exp = symbol_get_value_expression (exp->X_add_symbol); + if (! exp) + return 0; + } + + if (exp->X_op == O_PIC_reloc) + { + switch (*r_type_p) + { + case BFD_RELOC_NONE: + case BFD_RELOC_UNUSED: + *r_type_p = exp->X_md; + break; + + case BFD_RELOC_SH_DISP20: + switch (exp->X_md) + { + case BFD_RELOC_32_GOT_PCREL: + *r_type_p = BFD_RELOC_SH_GOT20; + break; + + case BFD_RELOC_32_GOTOFF: + *r_type_p = BFD_RELOC_SH_GOTOFF20; + break; + + case BFD_RELOC_SH_GOTFUNCDESC: + *r_type_p = BFD_RELOC_SH_GOTFUNCDESC20; + break; - ch = ident[0]; - for (ptr = &mapping[0]; ptr->length > 0; ptr++) - if (ch == ptr->string[0] - && len == ptr->length - && memcmp (ident, ptr->string, ptr->length) == 0) + case BFD_RELOC_SH_GOTOFFFUNCDESC: + *r_type_p = BFD_RELOC_SH_GOTOFFFUNCDESC20; + break; + + default: + abort (); + } + break; + +#ifdef HAVE_SH64 + case BFD_RELOC_SH_IMM_LOW16: + switch (exp->X_md) + { + case BFD_RELOC_32_GOTOFF: + *r_type_p = BFD_RELOC_SH_GOTOFF_LOW16; + break; + + case BFD_RELOC_SH_GOTPLT32: + *r_type_p = BFD_RELOC_SH_GOTPLT_LOW16; + break; + + case BFD_RELOC_32_GOT_PCREL: + *r_type_p = BFD_RELOC_SH_GOT_LOW16; + break; + + case BFD_RELOC_32_PLT_PCREL: + *r_type_p = BFD_RELOC_SH_PLT_LOW16; + break; + + default: + abort (); + } + break; + + case BFD_RELOC_SH_IMM_MEDLOW16: + switch (exp->X_md) + { + case BFD_RELOC_32_GOTOFF: + *r_type_p = BFD_RELOC_SH_GOTOFF_MEDLOW16; + break; + + case BFD_RELOC_SH_GOTPLT32: + *r_type_p = BFD_RELOC_SH_GOTPLT_MEDLOW16; + break; + + case BFD_RELOC_32_GOT_PCREL: + *r_type_p = BFD_RELOC_SH_GOT_MEDLOW16; + break; + + case BFD_RELOC_32_PLT_PCREL: + *r_type_p = BFD_RELOC_SH_PLT_MEDLOW16; + break; + + default: + abort (); + } + break; + + case BFD_RELOC_SH_IMM_MEDHI16: + switch (exp->X_md) + { + case BFD_RELOC_32_GOTOFF: + *r_type_p = BFD_RELOC_SH_GOTOFF_MEDHI16; + break; + + case BFD_RELOC_SH_GOTPLT32: + *r_type_p = BFD_RELOC_SH_GOTPLT_MEDHI16; + break; + + case BFD_RELOC_32_GOT_PCREL: + *r_type_p = BFD_RELOC_SH_GOT_MEDHI16; + break; + + case BFD_RELOC_32_PLT_PCREL: + *r_type_p = BFD_RELOC_SH_PLT_MEDHI16; + break; + + default: + abort (); + } + break; + + case BFD_RELOC_SH_IMM_HI16: + switch (exp->X_md) + { + case BFD_RELOC_32_GOTOFF: + *r_type_p = BFD_RELOC_SH_GOTOFF_HI16; + break; + + case BFD_RELOC_SH_GOTPLT32: + *r_type_p = BFD_RELOC_SH_GOTPLT_HI16; + break; + + case BFD_RELOC_32_GOT_PCREL: + *r_type_p = BFD_RELOC_SH_GOT_HI16; + break; + + case BFD_RELOC_32_PLT_PCREL: + *r_type_p = BFD_RELOC_SH_PLT_HI16; + break; + + default: + abort (); + } + break; +#endif + + default: + abort (); + } + if (exp == main_exp) + exp->X_op = O_symbol; + else + { + main_exp->X_add_symbol = exp->X_add_symbol; + main_exp->X_add_number += exp->X_add_number; + } + } + else + return (sh_PIC_related_p (exp->X_add_symbol) + || sh_PIC_related_p (exp->X_op_symbol)); + + return 0; +} + +/* Add expression EXP of SIZE bytes to offset OFF of fragment FRAG. */ + +void +sh_cons_fix_new (fragS *frag, int off, int size, expressionS *exp, + bfd_reloc_code_real_type r_type) +{ + r_type = BFD_RELOC_UNUSED; + + if (sh_check_fixup (exp, &r_type)) + as_bad (_("Invalid PIC expression.")); + + if (r_type == BFD_RELOC_UNUSED) + switch (size) { - /* Now check for identifier@suffix+constant */ - if (*str == '-' || *str == '+') - { - char *orig_line = input_line_pointer; - - input_line_pointer = str; - expression (new_exp_p); - if (new_exp_p->X_op == O_constant) - { - exp_p->X_add_number += new_exp_p->X_add_number; - str = input_line_pointer; - } - if (new_exp_p->X_op == O_subtract) - str = input_line_pointer; - - if (&input_line_pointer != str_p) - input_line_pointer = orig_line; - } + case 1: + r_type = BFD_RELOC_8; + break; - *str_p = str; - return ptr->reloc; + case 2: + r_type = BFD_RELOC_16; + break; + + case 4: + r_type = BFD_RELOC_32; + break; + + case 8: + r_type = BFD_RELOC_64; + break; + + default: + goto error; } + else if (size != 4) + { + error: + as_bad (_("unsupported BFD relocation size %u"), size); + r_type = BFD_RELOC_UNUSED; + } - return BFD_RELOC_UNUSED; + fix_new_exp (frag, off, size, exp, 0, r_type); } /* The regular cons() function, that reads constants, doesn't support suffixes such as @GOT, @GOTOFF and @PLT, that generate machine-specific relocation types. So we must define it here. */ /* Clobbers input_line_pointer, checks end-of-line. */ +/* NBYTES 1=.byte, 2=.word, 4=.long */ static void -sh_elf_cons (nbytes) - register int nbytes; /* 1=.byte, 2=.word, 4=.long */ +sh_elf_cons (int nbytes) { - expressionS exp, new_exp; - bfd_reloc_code_real_type reloc; - const char *name; + expressionS exp; + +#ifdef HAVE_SH64 + + /* Update existing range to include a previous insn, if there was one. */ + sh64_update_contents_mark (TRUE); + + /* We need to make sure the contents type is set to data. */ + sh64_flag_output (); + +#endif /* HAVE_SH64 */ if (is_it_end_of_statement ()) { @@ -306,82 +831,14 @@ sh_elf_cons (nbytes) return; } +#ifdef md_cons_align + md_cons_align (nbytes); +#endif + do { expression (&exp); - new_exp.X_op = O_absent; - new_exp.X_add_symbol = new_exp.X_op_symbol = NULL; - /* If the _GLOBAL_OFFSET_TABLE_ symbol hasn't been found yet, - use the name of the symbol to tell whether it's the - _GLOBAL_OFFSET_TABLE_. If it has, comparing the symbols is - sufficient. */ - if (! GOT_symbol && exp.X_add_symbol) - name = S_GET_NAME (exp.X_add_symbol); - else - name = NULL; - /* Check whether this expression involves the - _GLOBAL_OFFSET_TABLE_ symbol, by itself or added to a - difference of two other symbols. */ - if (((GOT_symbol && GOT_symbol == exp.X_add_symbol) - || (! GOT_symbol && name - && strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0)) - && (exp.X_op == O_symbol - || (exp.X_op == O_add - && ((symbol_get_value_expression (exp.X_op_symbol)->X_op) - == O_subtract)))) - { - reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput, - BFD_RELOC_32); - int size = bfd_get_reloc_size (reloc_howto); - - if (GOT_symbol == NULL) - GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME); - - if (size > nbytes) - as_bad (_("%s relocations do not fit in %d bytes\n"), - reloc_howto->name, nbytes); - else - { - register char *p = frag_more ((int) nbytes); - int offset = nbytes - size; - - fix_new_exp (frag_now, p - frag_now->fr_literal + offset, - size, &exp, 0, TC_RELOC_GLOBAL_OFFSET_TABLE); - } - } - /* Check if this symbol involves one of the magic suffixes, such - as @GOT, @GOTOFF or @PLT, and determine which relocation type - to use. */ - else if ((exp.X_op == O_symbol || (exp.X_op == O_add && exp.X_op_symbol)) - && *input_line_pointer == '@' - && ((reloc = sh_elf_suffix (&input_line_pointer, &exp, &new_exp)) - != BFD_RELOC_UNUSED)) - { - reloc_howto_type *reloc_howto = bfd_reloc_type_lookup (stdoutput, - reloc); - int size = bfd_get_reloc_size (reloc_howto); - - /* Force a GOT to be generated. */ - if (GOT_symbol == NULL) - GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME); - - if (size > nbytes) - as_bad (_("%s relocations do not fit in %d bytes\n"), - reloc_howto->name, nbytes); - else - { - register char *p = frag_more ((int) nbytes); - int offset = nbytes - size; - - fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size, - &exp, 0, reloc); - if (new_exp.X_op != O_absent) - fix_new_exp (frag_now, p - frag_now->fr_literal + offset, size, - &new_exp, 0, BFD_RELOC_32); - } - } - else - emit_expr (&exp, (unsigned int) nbytes); + emit_expr (&exp, (unsigned int) nbytes); } while (*input_line_pointer++ == ','); @@ -393,48 +850,129 @@ sh_elf_cons (nbytes) else demand_empty_rest_of_line (); } -#endif /* OBJ_ELF */ +/* The regular frag_offset_fixed_p doesn't work for rs_align_test + frags. */ + +static bfd_boolean +align_test_frag_offset_fixed_p (const fragS *frag1, const fragS *frag2, + bfd_vma *offset) +{ + const fragS *frag; + bfd_vma off; + + /* Start with offset initialised to difference between the two frags. + Prior to assigning frag addresses this will be zero. */ + off = frag1->fr_address - frag2->fr_address; + if (frag1 == frag2) + { + *offset = off; + return TRUE; + } + + /* Maybe frag2 is after frag1. */ + frag = frag1; + while (frag->fr_type == rs_fill + || frag->fr_type == rs_align_test) + { + if (frag->fr_type == rs_fill) + off += frag->fr_fix + frag->fr_offset * frag->fr_var; + else + off += frag->fr_fix; + frag = frag->fr_next; + if (frag == NULL) + break; + if (frag == frag2) + { + *offset = off; + return TRUE; + } + } + + /* Maybe frag1 is after frag2. */ + off = frag1->fr_address - frag2->fr_address; + frag = frag2; + while (frag->fr_type == rs_fill + || frag->fr_type == rs_align_test) + { + if (frag->fr_type == rs_fill) + off -= frag->fr_fix + frag->fr_offset * frag->fr_var; + else + off -= frag->fr_fix; + frag = frag->fr_next; + if (frag == NULL) + break; + if (frag == frag1) + { + *offset = off; + return TRUE; + } + } + + return FALSE; +} + +/* Optimize a difference of symbols which have rs_align_test frag if + possible. */ + +int +sh_optimize_expr (expressionS *l, operatorT op, expressionS *r) +{ + bfd_vma frag_off; + + if (op == O_subtract + && l->X_op == O_symbol + && r->X_op == O_symbol + && S_GET_SEGMENT (l->X_add_symbol) == S_GET_SEGMENT (r->X_add_symbol) + && (SEG_NORMAL (S_GET_SEGMENT (l->X_add_symbol)) + || r->X_add_symbol == l->X_add_symbol) + && align_test_frag_offset_fixed_p (symbol_get_frag (l->X_add_symbol), + symbol_get_frag (r->X_add_symbol), + &frag_off)) + { + offsetT symval_diff = S_GET_VALUE (l->X_add_symbol) + - S_GET_VALUE (r->X_add_symbol); + subtract_from_result (l, r->X_add_number, r->X_extrabit); + subtract_from_result (l, frag_off / OCTETS_PER_BYTE, 0); + add_to_result (l, symval_diff, symval_diff < 0); + l->X_op = O_constant; + l->X_add_symbol = 0; + return 1; + } + return 0; +} +#endif /* OBJ_ELF */ /* This function is called once, at assembler startup time. This should set up all the tables, etc that the MD part of the assembler needs. */ void -md_begin () +md_begin (void) { - sh_opcode_info *opcode; - char *prev_name = ""; - int target_arch; - -#ifdef TE_PE - /* The WinCE OS only supports little endian executables. */ - target_big_endian = 0; -#else - if (! shl) - target_big_endian = 1; -#endif + const sh_opcode_info *opcode; + const char *prev_name = ""; + unsigned int target_arch; - target_arch = arch_sh1_up & ~(sh_dsp ? arch_sh3e_up : arch_sh_dsp_up); + target_arch + = preset_target_arch ? preset_target_arch : arch_sh_up & ~arch_sh_has_dsp; valid_arch = target_arch; +#ifdef HAVE_SH64 + shmedia_md_begin (); +#endif + opcode_hash_control = hash_new (); /* Insert unique names into hash table. */ for (opcode = sh_table; opcode->name; opcode++) { - if (strcmp (prev_name, opcode->name)) + if (strcmp (prev_name, opcode->name) != 0) { - if (! (opcode->arch & target_arch)) + if (!SH_MERGE_ARCH_SET_VALID (opcode->arch, target_arch)) continue; prev_name = opcode->name; hash_insert (opcode_hash_control, opcode->name, (char *) opcode); } - else - { - /* Make all the opcodes with the same name point to the same - string. */ - opcode->name = prev_name; - } } } @@ -444,26 +982,15 @@ static int reg_x, reg_y; static int reg_efg; static int reg_b; -typedef struct - { - sh_arg_type type; - int reg; - expressionS immediate; - } -sh_operand_info; - -#define IDENT_CHAR(c) (isalnum (c) || (c) == '_') +#define IDENT_CHAR(c) (ISALNUM (c) || (c) == '_') /* Try to parse a reg name. Return the number of chars consumed. */ -static int -parse_reg (src, mode, reg) - char *src; - int *mode; - int *reg; +static unsigned int +parse_reg_without_prefix (char *src, int *mode, int *reg) { - char l0 = tolower (src[0]); - char l1 = l0 ? tolower (src[1]) : 0; + char l0 = TOLOWER (src[0]); + char l1 = l0 ? TOLOWER (src[1]) : 0; /* We use ! IDENT_CHAR for the next character after the register name, to make sure that we won't accidentally recognize a symbol name such as @@ -518,7 +1045,7 @@ parse_reg (src, mode, reg) *reg = A_A0_NUM; return 2; } - if (tolower (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3])) + if (TOLOWER (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = DSP_REG_N; *reg = A_A0G_NUM; @@ -533,7 +1060,7 @@ parse_reg (src, mode, reg) *reg = A_A1_NUM; return 2; } - if (tolower (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3])) + if (TOLOWER (src[2]) == 'g' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = DSP_REG_N; *reg = A_A1G_NUM; @@ -566,7 +1093,7 @@ parse_reg (src, mode, reg) } } - if (l0 == 'i' && l1 && ! IDENT_CHAR ((unsigned char) src[3])) + if (l0 == 'i' && l1 && ! IDENT_CHAR ((unsigned char) src[2])) { if (l1 == 's') { @@ -614,34 +1141,34 @@ parse_reg (src, mode, reg) if (l0 == 's' && l1 == 's' - && tolower (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) + && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_SSR; return 3; } - if (l0 == 's' && l1 == 'p' && tolower (src[2]) == 'c' + if (l0 == 's' && l1 == 'p' && TOLOWER (src[2]) == 'c' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_SPC; return 3; } - if (l0 == 's' && l1 == 'g' && tolower (src[2]) == 'r' + if (l0 == 's' && l1 == 'g' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_SGR; return 3; } - if (l0 == 'd' && l1 == 's' && tolower (src[2]) == 'r' + if (l0 == 'd' && l1 == 's' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_DSR; return 3; } - if (l0 == 'd' && l1 == 'b' && tolower (src[2]) == 'r' + if (l0 == 'd' && l1 == 'b' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_DBR; @@ -673,35 +1200,41 @@ parse_reg (src, mode, reg) *mode = A_PC; return 2; } - if (l0 == 'g' && l1 == 'b' && tolower (src[2]) == 'r' + if (l0 == 'g' && l1 == 'b' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_GBR; return 3; } - if (l0 == 'v' && l1 == 'b' && tolower (src[2]) == 'r' + if (l0 == 'v' && l1 == 'b' && TOLOWER (src[2]) == 'r' && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_VBR; return 3; } - if (l0 == 'm' && l1 == 'a' && tolower (src[2]) == 'c' + if (l0 == 't' && l1 == 'b' && TOLOWER (src[2]) == 'r' + && ! IDENT_CHAR ((unsigned char) src[3])) + { + *mode = A_TBR; + return 3; + } + if (l0 == 'm' && l1 == 'a' && TOLOWER (src[2]) == 'c' && ! IDENT_CHAR ((unsigned char) src[4])) { - if (src[3] == 'l') + if (TOLOWER (src[3]) == 'l') { *mode = A_MACL; return 4; } - if (src[3] == 'h') + if (TOLOWER (src[3]) == 'h') { *mode = A_MACH; return 4; } } - if (l0 == 'm' && l1 == 'o' && tolower (src[2]) == 'd' - && ! IDENT_CHAR ((unsigned char) src[4])) + if (l0 == 'm' && l1 == 'o' && TOLOWER (src[2]) == 'd' + && ! IDENT_CHAR ((unsigned char) src[3])) { *mode = A_MOD; return 3; @@ -782,25 +1315,25 @@ parse_reg (src, mode, reg) return 3; } } - if (l0 == 'f' && l1 == 'p' && tolower (src[2]) == 'u' - && tolower (src[3]) == 'l' + if (l0 == 'f' && l1 == 'p' && TOLOWER (src[2]) == 'u' + && TOLOWER (src[3]) == 'l' && ! IDENT_CHAR ((unsigned char) src[4])) { *mode = FPUL_N; return 4; } - if (l0 == 'f' && l1 == 'p' && tolower (src[2]) == 's' - && tolower (src[3]) == 'c' - && tolower (src[4]) == 'r' && ! IDENT_CHAR ((unsigned char) src[5])) + if (l0 == 'f' && l1 == 'p' && TOLOWER (src[2]) == 's' + && TOLOWER (src[3]) == 'c' + && TOLOWER (src[4]) == 'r' && ! IDENT_CHAR ((unsigned char) src[5])) { *mode = FPSCR_N; return 5; } - if (l0 == 'x' && l1 == 'm' && tolower (src[2]) == 't' - && tolower (src[3]) == 'r' - && tolower (src[4]) == 'x' && ! IDENT_CHAR ((unsigned char) src[5])) + if (l0 == 'x' && l1 == 'm' && TOLOWER (src[2]) == 't' + && TOLOWER (src[3]) == 'r' + && TOLOWER (src[4]) == 'x' && ! IDENT_CHAR ((unsigned char) src[5])) { *mode = XMTRX_M4; return 5; @@ -809,36 +1342,50 @@ parse_reg (src, mode, reg) return 0; } -static symbolS * -dot () +/* Like parse_reg_without_prefix, but this version supports + $-prefixed register names if enabled by the user. */ + +static unsigned int +parse_reg (char *src, int *mode, int *reg) { - const char *fake; - - /* JF: '.' is pseudo symbol with value of current location - in current segment. */ - fake = FAKE_LABEL_NAME; - return symbol_new (fake, - now_seg, - (valueT) frag_now_fix (), - frag_now); + unsigned int prefix; + unsigned int consumed; + + if (src[0] == '$') + { + if (allow_dollar_register_prefix) + { + src ++; + prefix = 1; + } + else + return 0; + } + else + prefix = 0; + + consumed = parse_reg_without_prefix (src, mode, reg); + + if (consumed == 0) + return 0; + + return consumed + prefix; } static char * -parse_exp (s, op) - char *s; - sh_operand_info *op; +parse_exp (char *s, sh_operand_info *op) { char *save; - char *new; + char *new_pointer; save = input_line_pointer; input_line_pointer = s; expression (&op->immediate); if (op->immediate.X_op == O_absent) as_bad (_("missing operand")); - new = input_line_pointer; + new_pointer = input_line_pointer; input_line_pointer = save; - return new; + return new_pointer; } /* The many forms of operand: @@ -861,14 +1408,20 @@ parse_exp (s, op) */ static char * -parse_at (src, op) - char *src; - sh_operand_info *op; +parse_at (char *src, sh_operand_info *op) { int len; int mode; src++; - if (src[0] == '-') + if (src[0] == '@') + { + src = parse_at (src, op); + if (op->type == A_DISP_TBR) + op->type = A_DISP2_TBR; + else + as_bad (_("illegal double indirection")); + } + else if (src[0] == '-') { /* Must be predecrement. */ src++; @@ -883,7 +1436,7 @@ parse_at (src, op) else if (src[0] == '(') { /* Could be @(disp, rn), @(disp, gbr), @(disp, pc), @(r0, gbr) or - @(r0, rn) */ + @(r0, rn). */ src++; len = parse_reg (src, &mode, &(op->reg)); if (len && mode == A_REG_N) @@ -894,29 +1447,42 @@ parse_at (src, op) as_bad (_("must be @(r0,...)")); } if (src[0] == ',') - src++; - /* Now can be rn or gbr */ - len = parse_reg (src, &mode, &(op->reg)); - if (mode == A_GBR) { - op->type = A_R0_GBR; + src++; + /* Now can be rn or gbr. */ + len = parse_reg (src, &mode, &(op->reg)); } - else if (mode == A_REG_N) + else { - op->type = A_IND_R0_REG_N; + len = 0; + } + if (len) + { + if (mode == A_GBR) + { + op->type = A_R0_GBR; + } + else if (mode == A_REG_N) + { + op->type = A_IND_R0_REG_N; + } + else + { + as_bad (_("syntax error in @(r0,...)")); + } } else { - as_bad (_("syntax error in @(r0,...)")); + as_bad (_("syntax error in @(r0...)")); } } else { - /* Must be an @(disp,.. thing) */ + /* Must be an @(disp,.. thing). */ src = parse_exp (src, op); if (src[0] == ',') src++; - /* Now can be rn, gbr or pc */ + /* Now can be rn, gbr or pc. */ len = parse_reg (src, &mode, &op->reg); if (len) { @@ -928,15 +1494,39 @@ parse_at (src, op) { op->type = A_DISP_GBR; } + else if (mode == A_TBR) + { + op->type = A_DISP_TBR; + } else if (mode == A_PC) { - /* Turn a plain @(4,pc) into @(.+4,pc). */ - if (op->immediate.X_op == O_constant) + /* We want @(expr, pc) to uniformly address . + expr, + no matter if expr is a constant, or a more complex + expression, e.g. sym-. or sym1-sym2. + However, we also used to accept @(sym,pc) + as addressing sym, i.e. meaning the same as plain sym. + Some existing code does use the @(sym,pc) syntax, so + we give it the old semantics for now, but warn about + its use, so that users have some time to fix their code. + + Note that due to this backward compatibility hack, + we'll get unexpected results when @(offset, pc) is used, + and offset is a symbol that is set later to an an address + difference, or an external symbol that is set to an + address difference in another source file, so we want to + eventually remove it. */ + if (op->immediate.X_op == O_symbol) { - op->immediate.X_add_symbol = dot(); - op->immediate.X_op = O_symbol; + op->type = A_DISP_PC; + as_warn (_("Deprecated syntax.")); + } + else + { + op->type = A_DISP_PC_ABS; + /* Such operands don't get corrected for PC==.+4, so + make the correction here. */ + op->immediate.X_add_number -= 4; } - op->type = A_DISP_PC; } else { @@ -958,39 +1548,39 @@ parse_at (src, op) { src += parse_reg (src, &mode, &(op->reg)); if (mode != A_REG_N) - { - as_bad (_("illegal register after @")); - } + as_bad (_("illegal register after @")); + if (src[0] == '+') { + char l0, l1; + src++; - if ((src[0] == 'r' && src[1] == '8') - || (src[0] == 'i' && (src[1] == 'x' || src[1] == 's'))) + l0 = TOLOWER (src[0]); + l1 = TOLOWER (src[1]); + + if ((l0 == 'r' && l1 == '8') + || (l0 == 'i' && (l1 == 'x' || l1 == 's'))) { src += 2; - op->type = A_PMOD_N; + op->type = AX_PMOD_N; } - if ((src[0] == 'r' && src[1] == '9') - || (src[0] == 'i' && src[1] == 'y')) + else if ( (l0 == 'r' && l1 == '9') + || (l0 == 'i' && l1 == 'y')) { src += 2; - op->type = A_PMODY_N; + op->type = AY_PMOD_N; } else op->type = A_INC_N; } else - { - op->type = A_IND_N; - } + op->type = A_IND_N; } return src; } static void -get_operand (ptr, op) - char **ptr; - sh_operand_info *op; +get_operand (char **ptr, sh_operand_info *op) { char *src = *ptr; int mode = -1; @@ -1026,10 +1616,7 @@ get_operand (ptr, op) } static char * -get_operands (info, args, operand) - sh_opcode_info *info; - char *args; - sh_operand_info *operand; +get_operands (sh_opcode_info *info, char *args, sh_operand_info *operand) { char *ptr = args; if (info->arg[0]) @@ -1087,18 +1674,16 @@ get_operands (info, args, operand) provided. */ static sh_opcode_info * -get_specific (opcode, operands) - sh_opcode_info *opcode; - sh_operand_info *operands; +get_specific (sh_opcode_info *opcode, sh_operand_info *operands) { sh_opcode_info *this_try = opcode; - char *name = opcode->name; + const char *name = opcode->name; int n = 0; while (opcode->name) { this_try = opcode++; - if (this_try->name != name) + if ((this_try->name != name) && (strcmp (this_try->name, name) != 0)) { /* We've looked so far down the table that we've run out of opcodes with the same name. */ @@ -1116,11 +1701,15 @@ get_specific (opcode, operands) switch (arg) { + case A_DISP_PC: + if (user->type == A_DISP_PC_ABS) + break; + /* Fall through. */ case A_IMM: case A_BDISP12: case A_BDISP8: case A_DISP_GBR: - case A_DISP_PC: + case A_DISP2_TBR: case A_MACH: case A_PR: case A_MACL: @@ -1153,8 +1742,6 @@ get_specific (opcode, operands) case V_REG_N: case FPUL_N: case FPSCR_N: - case A_PMOD_N: - case A_PMODY_N: case DSP_REG_N: /* Opcode needs rn */ if (user->type != arg) @@ -1167,6 +1754,7 @@ get_specific (opcode, operands) reg_n = user->reg; break; case A_GBR: + case A_TBR: case A_SR: case A_VBR: case A_DSR: @@ -1187,6 +1775,22 @@ get_specific (opcode, operands) reg_b = user->reg; break; + case A_INC_R15: + if (user->type != A_INC_N) + goto fail; + if (user->reg != 15) + goto fail; + reg_n = user->reg; + break; + + case A_DEC_R15: + if (user->type != A_DEC_N) + goto fail; + if (user->reg != 15) + goto fail; + reg_n = user->reg; + break; + case A_REG_M: case A_INC_M: case A_DEC_M: @@ -1200,6 +1804,237 @@ get_specific (opcode, operands) reg_m = user->reg; break; + case AS_DEC_N: + if (user->type != A_DEC_N) + goto fail; + if (user->reg < 2 || user->reg > 5) + goto fail; + reg_n = user->reg; + break; + + case AS_INC_N: + if (user->type != A_INC_N) + goto fail; + if (user->reg < 2 || user->reg > 5) + goto fail; + reg_n = user->reg; + break; + + case AS_IND_N: + if (user->type != A_IND_N) + goto fail; + if (user->reg < 2 || user->reg > 5) + goto fail; + reg_n = user->reg; + break; + + case AS_PMOD_N: + if (user->type != AX_PMOD_N) + goto fail; + if (user->reg < 2 || user->reg > 5) + goto fail; + reg_n = user->reg; + break; + + case AX_INC_N: + if (user->type != A_INC_N) + goto fail; + if (user->reg < 4 || user->reg > 5) + goto fail; + reg_n = user->reg; + break; + + case AX_IND_N: + if (user->type != A_IND_N) + goto fail; + if (user->reg < 4 || user->reg > 5) + goto fail; + reg_n = user->reg; + break; + + case AX_PMOD_N: + if (user->type != AX_PMOD_N) + goto fail; + if (user->reg < 4 || user->reg > 5) + goto fail; + reg_n = user->reg; + break; + + case AXY_INC_N: + if (user->type != A_INC_N) + goto fail; + if ((user->reg < 4 || user->reg > 5) + && (user->reg < 0 || user->reg > 1)) + goto fail; + reg_n = user->reg; + break; + + case AXY_IND_N: + if (user->type != A_IND_N) + goto fail; + if ((user->reg < 4 || user->reg > 5) + && (user->reg < 0 || user->reg > 1)) + goto fail; + reg_n = user->reg; + break; + + case AXY_PMOD_N: + if (user->type != AX_PMOD_N) + goto fail; + if ((user->reg < 4 || user->reg > 5) + && (user->reg < 0 || user->reg > 1)) + goto fail; + reg_n = user->reg; + break; + + case AY_INC_N: + if (user->type != A_INC_N) + goto fail; + if (user->reg < 6 || user->reg > 7) + goto fail; + reg_n = user->reg; + break; + + case AY_IND_N: + if (user->type != A_IND_N) + goto fail; + if (user->reg < 6 || user->reg > 7) + goto fail; + reg_n = user->reg; + break; + + case AY_PMOD_N: + if (user->type != AY_PMOD_N) + goto fail; + if (user->reg < 6 || user->reg > 7) + goto fail; + reg_n = user->reg; + break; + + case AYX_INC_N: + if (user->type != A_INC_N) + goto fail; + if ((user->reg < 6 || user->reg > 7) + && (user->reg < 2 || user->reg > 3)) + goto fail; + reg_n = user->reg; + break; + + case AYX_IND_N: + if (user->type != A_IND_N) + goto fail; + if ((user->reg < 6 || user->reg > 7) + && (user->reg < 2 || user->reg > 3)) + goto fail; + reg_n = user->reg; + break; + + case AYX_PMOD_N: + if (user->type != AY_PMOD_N) + goto fail; + if ((user->reg < 6 || user->reg > 7) + && (user->reg < 2 || user->reg > 3)) + goto fail; + reg_n = user->reg; + break; + + case DSP_REG_A_M: + if (user->type != DSP_REG_N) + goto fail; + if (user->reg != A_A0_NUM + && user->reg != A_A1_NUM) + goto fail; + reg_m = user->reg; + break; + + case DSP_REG_AX: + if (user->type != DSP_REG_N) + goto fail; + switch (user->reg) + { + case A_A0_NUM: + reg_x = 0; + break; + case A_A1_NUM: + reg_x = 2; + break; + case A_X0_NUM: + reg_x = 1; + break; + case A_X1_NUM: + reg_x = 3; + break; + default: + goto fail; + } + break; + + case DSP_REG_XY: + if (user->type != DSP_REG_N) + goto fail; + switch (user->reg) + { + case A_X0_NUM: + reg_x = 0; + break; + case A_X1_NUM: + reg_x = 2; + break; + case A_Y0_NUM: + reg_x = 1; + break; + case A_Y1_NUM: + reg_x = 3; + break; + default: + goto fail; + } + break; + + case DSP_REG_AY: + if (user->type != DSP_REG_N) + goto fail; + switch (user->reg) + { + case A_A0_NUM: + reg_y = 0; + break; + case A_A1_NUM: + reg_y = 1; + break; + case A_Y0_NUM: + reg_y = 2; + break; + case A_Y1_NUM: + reg_y = 3; + break; + default: + goto fail; + } + break; + + case DSP_REG_YX: + if (user->type != DSP_REG_N) + goto fail; + switch (user->reg) + { + case A_Y0_NUM: + reg_y = 0; + break; + case A_Y1_NUM: + reg_y = 1; + break; + case A_X0_NUM: + reg_y = 2; + break; + case A_X1_NUM: + reg_y = 3; + break; + default: + goto fail; + } + break; + case DSP_REG_X: if (user->type != DSP_REG_N) goto fail; @@ -1357,10 +2192,40 @@ get_specific (opcode, operands) printf (_("unhandled %d\n"), arg); goto fail; } + if (SH_MERGE_ARCH_SET_VALID (valid_arch, arch_sh2a_nofpu_up) + && ( arg == A_DISP_REG_M + || arg == A_DISP_REG_N)) + { + /* Check a few key IMM* fields for overflow. */ + int opf; + long val = user->immediate.X_add_number; + + for (opf = 0; opf < 4; opf ++) + switch (this_try->nibbles[opf]) + { + case IMM0_4: + case IMM1_4: + if (val < 0 || val > 15) + goto fail; + break; + case IMM0_4BY2: + case IMM1_4BY2: + if (val < 0 || val > 15 * 2) + goto fail; + break; + case IMM0_4BY4: + case IMM1_4BY4: + if (val < 0 || val > 15 * 4) + goto fail; + break; + default: + break; + } + } } - if ( !(valid_arch & this_try->arch)) + if ( !SH_MERGE_ARCH_SET_VALID (valid_arch, this_try->arch)) goto fail; - valid_arch &= this_try->arch; + valid_arch = SH_MERGE_ARCH_SET (valid_arch, this_try->arch); return this_try; fail: ; @@ -1369,27 +2234,8 @@ get_specific (opcode, operands) return 0; } -int -check (operand, low, high) - expressionS *operand; - int low; - int high; -{ - if (operand->X_op != O_constant - || operand->X_add_number < low - || operand->X_add_number > high) - { - as_bad (_("operand must be absolute in range %d..%d"), low, high); - } - return operand->X_add_number; -} - static void -insert (where, how, pcrel, op) - char *where; - int how; - int pcrel; - sh_operand_info *op; +insert (char *where, int how, int pcrel, sh_operand_info *op) { fix_new_exp (frag_now, where - frag_now->fr_literal, @@ -1400,9 +2246,17 @@ insert (where, how, pcrel, op) } static void -build_relax (opcode, op) - sh_opcode_info *opcode; - sh_operand_info *op; +insert4 (char * where, int how, int pcrel, sh_operand_info * op) +{ + fix_new_exp (frag_now, + where - frag_now->fr_literal, + 4, + & op->immediate, + pcrel, + how); +} +static void +build_relax (sh_opcode_info *opcode, sh_operand_info *op) { int high_byte = target_big_endian ? 0 : 1; char *p; @@ -1436,11 +2290,8 @@ build_relax (opcode, op) /* Insert ldrs & ldre with fancy relocations that relaxation can recognize. */ static char * -insert_loop_bounds (output, operand) - char *output; - sh_operand_info *operand; +insert_loop_bounds (char *output, sh_operand_info *operand) { - char *name; symbolS *end_sym; /* Since the low byte of the opcode will be overwritten by the reloc, we @@ -1453,6 +2304,7 @@ insert_loop_bounds (output, operand) if (sh_relax) { static int count = 0; + char name[11]; /* If the last loop insn is a two-byte-insn, it is in danger of being swapped with the insn after it. To prevent this, create a new @@ -1461,7 +2313,6 @@ insert_loop_bounds (output, operand) right in the middle, but four byte insns are not swapped anyways. */ /* A REPEAT takes 6 bytes. The SH has a 32 bit address space. Hence a 9 digit number should be enough to count all REPEATs. */ - name = alloca (11); sprintf (name, "_R%x", count++ & 0x3fffffff); end_sym = symbol_new (name, undefined_section, 0, &zero_address_frag); /* Make this a local symbol. */ @@ -1486,48 +2337,126 @@ insert_loop_bounds (output, operand) /* Now we know what sort of opcodes it is, let's build the bytes. */ static unsigned int -build_Mytes (opcode, operand) - sh_opcode_info *opcode; - sh_operand_info *operand; - +build_Mytes (sh_opcode_info *opcode, sh_operand_info *operand) { - int index; - char nbuf[4]; - char *output = frag_more (2); + int indx; + char nbuf[8]; + char *output; unsigned int size = 2; int low_byte = target_big_endian ? 1 : 0; + int max_index = 4; + bfd_reloc_code_real_type r_type; +#ifdef OBJ_ELF + int unhandled_pic = 0; +#endif + nbuf[0] = 0; nbuf[1] = 0; nbuf[2] = 0; nbuf[3] = 0; + nbuf[4] = 0; + nbuf[5] = 0; + nbuf[6] = 0; + nbuf[7] = 0; + +#ifdef OBJ_ELF + for (indx = 0; indx < 3; indx++) + if (opcode->arg[indx] == A_IMM + && operand[indx].type == A_IMM + && (operand[indx].immediate.X_op == O_PIC_reloc + || sh_PIC_related_p (operand[indx].immediate.X_add_symbol) + || sh_PIC_related_p (operand[indx].immediate.X_op_symbol))) + unhandled_pic = 1; +#endif + + if (SH_MERGE_ARCH_SET (opcode->arch, arch_op32)) + { + output = frag_more (4); + size = 4; + max_index = 8; + } + else + output = frag_more (2); - for (index = 0; index < 4; index++) + for (indx = 0; indx < max_index; indx++) { - sh_nibble_type i = opcode->nibbles[index]; + sh_nibble_type i = opcode->nibbles[indx]; if (i < 16) { - nbuf[index] = i; + nbuf[indx] = i; } else { switch (i) { case REG_N: - nbuf[index] = reg_n; + case REG_N_D: + nbuf[indx] = reg_n; break; case REG_M: - nbuf[index] = reg_m; + nbuf[indx] = reg_m; break; case SDT_REG_N: if (reg_n < 2 || reg_n > 5) as_bad (_("Invalid register: 'r%d'"), reg_n); - nbuf[index] = (reg_n & 3) | 4; + nbuf[indx] = (reg_n & 3) | 4; break; case REG_NM: - nbuf[index] = reg_n | (reg_m >> 2); + nbuf[indx] = reg_n | (reg_m >> 2); break; case REG_B: - nbuf[index] = reg_b | 0x08; + nbuf[indx] = reg_b | 0x08; + break; + case REG_N_B01: + nbuf[indx] = reg_n | 0x01; + break; + case IMM0_3s: + nbuf[indx] |= 0x08; + case IMM0_3c: + insert (output + low_byte, BFD_RELOC_SH_IMM3, 0, operand); + break; + case IMM0_3Us: + nbuf[indx] |= 0x80; + case IMM0_3Uc: + insert (output + low_byte, BFD_RELOC_SH_IMM3U, 0, operand); + break; + case DISP0_12: + insert (output + 2, BFD_RELOC_SH_DISP12, 0, operand); + break; + case DISP0_12BY2: + insert (output + 2, BFD_RELOC_SH_DISP12BY2, 0, operand); + break; + case DISP0_12BY4: + insert (output + 2, BFD_RELOC_SH_DISP12BY4, 0, operand); + break; + case DISP0_12BY8: + insert (output + 2, BFD_RELOC_SH_DISP12BY8, 0, operand); + break; + case DISP1_12: + insert (output + 2, BFD_RELOC_SH_DISP12, 0, operand+1); + break; + case DISP1_12BY2: + insert (output + 2, BFD_RELOC_SH_DISP12BY2, 0, operand+1); + break; + case DISP1_12BY4: + insert (output + 2, BFD_RELOC_SH_DISP12BY4, 0, operand+1); + break; + case DISP1_12BY8: + insert (output + 2, BFD_RELOC_SH_DISP12BY8, 0, operand+1); + break; + case IMM0_20_4: + break; + case IMM0_20: + r_type = BFD_RELOC_SH_DISP20; +#ifdef OBJ_ELF + if (sh_check_fixup (&operand->immediate, &r_type)) + as_bad (_("Invalid PIC expression.")); + unhandled_pic = 0; +#endif + insert4 (output, r_type, 0, operand); + break; + case IMM0_20BY8: + insert4 (output, BFD_RELOC_SH_DISP20BY8, 0, operand); break; case IMM0_4BY4: insert (output + low_byte, BFD_RELOC_SH_IMM4BY4, 0, operand); @@ -1566,14 +2495,16 @@ build_Mytes (opcode, operand) insert (output + low_byte, BFD_RELOC_SH_IMM8, 0, operand + 1); break; case PCRELIMM_8BY4: - insert (output, BFD_RELOC_SH_PCRELIMM8BY4, 1, operand); + insert (output, BFD_RELOC_SH_PCRELIMM8BY4, + operand->type != A_DISP_PC_ABS, operand); break; case PCRELIMM_8BY2: - insert (output, BFD_RELOC_SH_PCRELIMM8BY2, 1, operand); + insert (output, BFD_RELOC_SH_PCRELIMM8BY2, + operand->type != A_DISP_PC_ABS, operand); break; case REPEAT: output = insert_loop_bounds (output, operand); - nbuf[index] = opcode->nibbles[3]; + nbuf[indx] = opcode->nibbles[3]; operand += 2; break; default: @@ -1581,6 +2512,10 @@ build_Mytes (opcode, operand) } } } +#ifdef OBJ_ELF + if (unhandled_pic) + as_bad (_("misplaced PIC operand")); +#endif if (!target_big_endian) { output[1] = (nbuf[0] << 4) | (nbuf[1]); @@ -1591,6 +2526,19 @@ build_Mytes (opcode, operand) output[0] = (nbuf[0] << 4) | (nbuf[1]); output[1] = (nbuf[2] << 4) | (nbuf[3]); } + if (SH_MERGE_ARCH_SET (opcode->arch, arch_op32)) + { + if (!target_big_endian) + { + output[3] = (nbuf[4] << 4) | (nbuf[5]); + output[2] = (nbuf[6] << 4) | (nbuf[7]); + } + else + { + output[2] = (nbuf[4] << 4) | (nbuf[5]); + output[3] = (nbuf[6] << 4) | (nbuf[7]); + } + } return size; } @@ -1598,14 +2546,13 @@ build_Mytes (opcode, operand) *STR_P to the first character after the last one read. */ static sh_opcode_info * -find_cooked_opcode (str_p) - char **str_p; +find_cooked_opcode (char **str_p) { char *str = *str_p; unsigned char *op_start; unsigned char *op_end; char name[20]; - int nlen = 0; + unsigned int nlen = 0; /* Drop leading whitespace. */ while (*str == ' ') @@ -1615,9 +2562,9 @@ find_cooked_opcode (str_p) The pre-processor will eliminate whitespace in front of any '@' after the first argument; we may be called from assemble_ppi, so the opcode might be terminated by an '@'. */ - for (op_start = op_end = (unsigned char *) (str); + for (op_start = op_end = (unsigned char *) str; *op_end - && nlen < 20 + && nlen < sizeof (name) - 1 && !is_end_of_line[*op_end] && *op_end != ' ' && *op_end != '@'; op_end++) { @@ -1626,15 +2573,15 @@ find_cooked_opcode (str_p) /* The machine independent code will convert CMP/EQ into cmp/EQ because it thinks the '/' is the end of the symbol. Moreover, all but the first sub-insn is a parallel processing insn won't - be capitailzed. Instead of hacking up the machine independent + be capitalized. Instead of hacking up the machine independent code, we just deal with it here. */ - c = isupper (c) ? tolower (c) : c; + c = TOLOWER (c); name[nlen] = c; nlen++; } name[nlen] = 0; - *str_p = op_end; + *str_p = (char *) op_end; if (nlen == 0) as_bad (_("can't find opcode ")); @@ -1646,9 +2593,7 @@ find_cooked_opcode (str_p) #define DDT_BASE 0xf000 /* Base value for double data transfer insns */ static unsigned int -assemble_ppi (op_end, opcode) - char *op_end; - sh_opcode_info *opcode; +assemble_ppi (char *op_end, sh_opcode_info *opcode) { int movx = 0; int movy = 0; @@ -1658,17 +2603,19 @@ assemble_ppi (op_end, opcode) int move_code; unsigned int size; - /* Some insn ignore one or more register fields, e.g. psts machl,a0. - Make sure we encode a defined insn pattern. */ - reg_x = 0; - reg_y = 0; - for (;;) { sh_operand_info operand[3]; + /* Some insn ignore one or more register fields, e.g. psts machl,a0. + Make sure we encode a defined insn pattern. */ + reg_x = 0; + reg_y = 0; + reg_n = 0; + if (opcode->arg[0] != A_END) op_end = get_operands (opcode, op_end, operand); + try_another_opcode: opcode = get_specific (opcode, operand); if (opcode == 0) { @@ -1699,9 +2646,43 @@ assemble_ppi (op_end, opcode) movy = DDT_BASE; break; + case MOVX_NOPY: + if (movx) + as_bad (_("multiple movx specifications")); + if ((reg_n < 4 || reg_n > 5) + && (reg_n < 0 || reg_n > 1)) + as_bad (_("invalid movx address register")); + if (movy && movy != DDT_BASE) + as_bad (_("insn cannot be combined with non-nopy")); + movx = ((((reg_n & 1) != 0) << 9) + + (((reg_n & 4) == 0) << 8) + + (reg_x << 6) + + (opcode->nibbles[2] << 4) + + opcode->nibbles[3] + + DDT_BASE); + break; + + case MOVY_NOPX: + if (movy) + as_bad (_("multiple movy specifications")); + if ((reg_n < 6 || reg_n > 7) + && (reg_n < 2 || reg_n > 3)) + as_bad (_("invalid movy address register")); + if (movx && movx != DDT_BASE) + as_bad (_("insn cannot be combined with non-nopx")); + movy = ((((reg_n & 1) != 0) << 8) + + (((reg_n & 4) == 0) << 9) + + (reg_y << 6) + + (opcode->nibbles[2] << 4) + + opcode->nibbles[3] + + DDT_BASE); + break; + case MOVX: if (movx) as_bad (_("multiple movx specifications")); + if (movy & 0x2ac) + as_bad (_("previous movy requires nopx")); if (reg_n < 4 || reg_n > 5) as_bad (_("invalid movx address register")); if (opcode->nibbles[2] & 8) @@ -1723,6 +2704,8 @@ assemble_ppi (op_end, opcode) case MOVY: if (movy) as_bad (_("multiple movy specifications")); + if (movx & 0x153) + as_bad (_("previous movx requires nopy")); if (opcode->nibbles[2] & 8) { /* Bit 3 in nibbles[2] is intended for bit 4 of the opcode, @@ -1751,11 +2734,31 @@ assemble_ppi (op_end, opcode) | (operand[0].immediate.X_add_number & 127) << 4 | reg_n); break; + case PPI3NC: + if (cond) + { + opcode++; + goto try_another_opcode; + } + /* Fall through. */ case PPI3: if (field_b) as_bad (_("multiple parallel processing specifications")); field_b = ((opcode->nibbles[2] << 12) + (opcode->nibbles[3] << 8) + (reg_x << 6) + (reg_y << 4) + reg_n); + switch (opcode->nibbles[4]) + { + case HEX_0: + case HEX_XX00: + case HEX_00YY: + break; + case HEX_1: + case HEX_4: + field_b += opcode->nibbles[4] << 4; + break; + default: + abort (); + } break; case PDC: if (cond) @@ -1770,13 +2773,34 @@ assemble_ppi (op_end, opcode) field_b = ((opcode->nibbles[2] << 12) + (opcode->nibbles[3] << 8) + cond + (reg_x << 6) + (reg_y << 4) + reg_n); cond = 0; + switch (opcode->nibbles[4]) + { + case HEX_0: + case HEX_XX00: + case HEX_00YY: + break; + case HEX_1: + case HEX_4: + field_b += opcode->nibbles[4] << 4; + break; + default: + abort (); + } break; case PMUL: if (field_b) { - if ((field_b & 0xef00) != 0xa100) + if ((field_b & 0xef00) == 0xa100) + field_b -= 0x8100; + /* pclr Dz pmuls Se,Sf,Dg */ + else if ((field_b & 0xff00) == 0x8d00 + && (SH_MERGE_ARCH_SET_VALID (valid_arch, arch_sh4al_dsp_up))) + { + valid_arch = SH_MERGE_ARCH_SET (valid_arch, arch_sh4al_dsp_up); + field_b -= 0x8cf0; + } + else as_bad (_("insn cannot be combined with pmuls")); - field_b -= 0x8100; switch (field_b & 0xf) { case A_X0_NUM: @@ -1792,8 +2816,17 @@ assemble_ppi (op_end, opcode) field_b += 3 - A_A1_NUM; break; default: - as_bad (_("bad padd / psub pmuls output operand")); + as_bad (_("bad combined pmuls output operand")); } + /* Generate warning if the destination register for padd / psub + and pmuls is the same ( only for A0 or A1 ). + If the last nibble is 1010 then A0 is used in both + padd / psub and pmuls. If it is 1111 then A1 is used + as destination register in both padd / psub and pmuls. */ + + if ((((field_b | reg_efg) & 0x000F) == 0x000A) + || (((field_b | reg_efg) & 0x000F) == 0x000F)) + as_warn (_("destination register is same for parallel insns")); } field_b += 0x4000 + reg_efg; break; @@ -1861,20 +2894,79 @@ assemble_ppi (op_end, opcode) the frags/bytes it assembles to. */ void -md_assemble (str) - char *str; +md_assemble (char *str) { - unsigned char *op_end; + char *op_end; sh_operand_info operand[3]; sh_opcode_info *opcode; unsigned int size = 0; + char *initial_str = str; + +#ifdef HAVE_SH64 + if (sh64_isa_mode == sh64_isa_shmedia) + { + shmedia_md_assemble (str); + return; + } + else + { + /* If we've seen pseudo-directives, make sure any emitted data or + frags are marked as data. */ + if (!seen_insn) + { + sh64_update_contents_mark (TRUE); + sh64_set_contents_type (CRT_SH5_ISA16); + } + + seen_insn = TRUE; + } +#endif /* HAVE_SH64 */ opcode = find_cooked_opcode (&str); op_end = str; if (opcode == NULL) { - as_bad (_("unknown opcode")); + /* The opcode is not in the hash table. + This means we definitely have an assembly failure, + but the instruction may be valid in another CPU variant. + In this case emit something better than 'unknown opcode'. + Search the full table in sh-opc.h to check. */ + + char *name = initial_str; + int name_length = 0; + const sh_opcode_info *op; + int found = 0; + + /* identify opcode in string */ + while (ISSPACE (*name)) + { + name++; + } + while (!ISSPACE (name[name_length])) + { + name_length++; + } + + /* search for opcode in full list */ + for (op = sh_table; op->name; op++) + { + if (strncasecmp (op->name, name, name_length) == 0 + && op->name[name_length] == '\0') + { + found = 1; + break; + } + } + + if ( found ) + { + as_bad (_("opcode not valid for this cpu variant")); + } + else + { + as_bad (_("unknown opcode")); + } return; } @@ -1897,8 +2989,17 @@ md_assemble (str) if (opcode->arg[0] == A_BDISP12 || opcode->arg[0] == A_BDISP8) { + /* Since we skip get_specific here, we have to check & update + valid_arch now. */ + if (SH_MERGE_ARCH_SET_VALID (valid_arch, opcode->arch)) + valid_arch = SH_MERGE_ARCH_SET (valid_arch, opcode->arch); + else + as_bad (_("Delayed branches not available on SH1")); parse_exp (op_end + 1, &operand[0]); build_relax (opcode, &operand[0]); + + /* All branches are currently 16 bit. */ + size = 2; } else { @@ -1942,7 +3043,7 @@ md_assemble (str) emits a BFD_RELOC_SH_LABEL reloc if necessary. */ void -sh_frob_label () +sh_frob_label (symbolS *sym) { static fragS *last_label_frag; static int last_label_offset; @@ -1961,13 +3062,15 @@ sh_frob_label () last_label_offset = offset; } } + + dwarf2_emit_label (sym); } /* This routine is called when the assembler is about to output some data. It emits a BFD_RELOC_SH_DATA reloc if necessary. */ void -sh_flush_pending_output () +sh_flush_pending_output (void) { if (sh_relax && seg_info (now_seg)->tc_segment_info_data.in_code) @@ -1979,109 +3082,17 @@ sh_flush_pending_output () } symbolS * -md_undefined_symbol (name) - char *name; +md_undefined_symbol (char *name ATTRIBUTE_UNUSED) { -#ifdef OBJ_ELF - /* Under ELF we need to default _GLOBAL_OFFSET_TABLE. Otherwise we - have no need to default values of symbols. */ - if (strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0) - { - if (!GOT_symbol) - { - if (symbol_find (name)) - as_bad ("GOT already in the symbol table"); - - GOT_symbol = symbol_new (name, undefined_section, - (valueT)0, & zero_address_frag); - } - - return GOT_symbol; - } -#endif /* OBJ_ELF */ - return 0; } -#ifdef OBJ_COFF -#ifndef BFD_ASSEMBLER - -void -tc_crawl_symbol_chain (headers) - object_headers *headers; -{ - printf (_("call to tc_crawl_symbol_chain \n")); -} - -void -tc_headers_hook (headers) - object_headers *headers; -{ - printf (_("call to tc_headers_hook \n")); -} - -#endif -#endif - /* Various routines to kill one day. */ -/* Equal to MAX_PRECISION in atof-ieee.c. */ -#define MAX_LITTLENUMS 6 - -/* Turn a string in input_line_pointer into a floating point constant - of type TYPE, and store the appropriate bytes in *LITP. The number - of LITTLENUMS emitted is stored in *SIZEP . An error message is - returned, or NULL on OK. */ - -char * -md_atof (type, litP, sizeP) - int type; - char *litP; - int *sizeP; -{ - int prec; - LITTLENUM_TYPE words[4]; - char *t; - int i; - - switch (type) - { - case 'f': - prec = 2; - break; - - case 'd': - prec = 4; - break; - - default: - *sizeP = 0; - return _("bad call to md_atof"); - } - - t = atof_ieee (input_line_pointer, type, words); - if (t) - input_line_pointer = t; - - *sizeP = prec * 2; - - if (! target_big_endian) - { - for (i = prec - 1; i >= 0; i--) - { - md_number_to_chars (litP, (valueT) words[i], 2); - litP += 2; - } - } - else - { - for (i = 0; i < prec; i++) - { - md_number_to_chars (litP, (valueT) words[i], 2); - litP += 2; - } - } - return NULL; +const char * +md_atof (int type, char *litP, int *sizeP) +{ + return ieee_md_atof (type, litP, sizeP, target_big_endian); } /* Handle the .uses pseudo-op. This pseudo-op is used just before a @@ -2090,8 +3101,7 @@ md_atof (type, litP, sizeP) special reloc for the linker. */ static void -s_uses (ignore) - int ignore ATTRIBUTE_UNUSED; +s_uses (int ignore ATTRIBUTE_UNUSED) { expressionS ex; @@ -2112,26 +3122,65 @@ s_uses (ignore) demand_empty_rest_of_line (); } -CONST char *md_shortopts = ""; -struct option md_longopts[] = +enum options { -#define OPTION_RELAX (OPTION_MD_BASE) -#define OPTION_LITTLE (OPTION_MD_BASE + 1) -#define OPTION_SMALL (OPTION_LITTLE + 1) -#define OPTION_DSP (OPTION_SMALL + 1) + OPTION_RELAX = OPTION_MD_BASE, + OPTION_BIG, + OPTION_LITTLE, + OPTION_SMALL, + OPTION_DSP, + OPTION_ISA, + OPTION_RENESAS, + OPTION_ALLOW_REG_PREFIX, +#ifdef HAVE_SH64 + OPTION_ABI, + OPTION_NO_MIX, + OPTION_SHCOMPACT_CONST_CRANGE, + OPTION_NO_EXPAND, + OPTION_PT32, +#endif + OPTION_H_TICK_HEX, +#ifdef OBJ_ELF + OPTION_FDPIC, +#endif + OPTION_DUMMY /* Not used. This is just here to make it easy to add and subtract options from this enum. */ +}; +const char *md_shortopts = ""; +struct option md_longopts[] = +{ {"relax", no_argument, NULL, OPTION_RELAX}, + {"big", no_argument, NULL, OPTION_BIG}, {"little", no_argument, NULL, OPTION_LITTLE}, + /* The next two switches are here because the + generic parts of the linker testsuite uses them. */ + {"EB", no_argument, NULL, OPTION_BIG}, + {"EL", no_argument, NULL, OPTION_LITTLE}, {"small", no_argument, NULL, OPTION_SMALL}, {"dsp", no_argument, NULL, OPTION_DSP}, + {"isa", required_argument, NULL, OPTION_ISA}, + {"renesas", no_argument, NULL, OPTION_RENESAS}, + {"allow-reg-prefix", no_argument, NULL, OPTION_ALLOW_REG_PREFIX}, + +#ifdef HAVE_SH64 + {"abi", required_argument, NULL, OPTION_ABI}, + {"no-mix", no_argument, NULL, OPTION_NO_MIX}, + {"shcompact-const-crange", no_argument, NULL, OPTION_SHCOMPACT_CONST_CRANGE}, + {"no-expand", no_argument, NULL, OPTION_NO_EXPAND}, + {"expand-pt32", no_argument, NULL, OPTION_PT32}, +#endif /* HAVE_SH64 */ + { "h-tick-hex", no_argument, NULL, OPTION_H_TICK_HEX }, + +#ifdef OBJ_ELF + {"fdpic", no_argument, NULL, OPTION_FDPIC}, +#endif + {NULL, no_argument, NULL, 0} }; size_t md_longopts_size = sizeof (md_longopts); int -md_parse_option (c, arg) - int c; - char *arg ATTRIBUTE_UNUSED; +md_parse_option (int c, const char *arg ATTRIBUTE_UNUSED) { switch (c) { @@ -2139,8 +3188,11 @@ md_parse_option (c, arg) sh_relax = 1; break; + case OPTION_BIG: + target_big_endian = 1; + break; + case OPTION_LITTLE: - shl = 1; target_big_endian = 0; break; @@ -2149,9 +3201,119 @@ md_parse_option (c, arg) break; case OPTION_DSP: - sh_dsp = 1; + preset_target_arch = arch_sh_up & ~(arch_sh_sp_fpu|arch_sh_dp_fpu); + break; + + case OPTION_RENESAS: + dont_adjust_reloc_32 = 1; + break; + + case OPTION_ALLOW_REG_PREFIX: + allow_dollar_register_prefix = 1; + break; + + case OPTION_ISA: + if (strcasecmp (arg, "dsp") == 0) + preset_target_arch = arch_sh_up & ~(arch_sh_sp_fpu|arch_sh_dp_fpu); + else if (strcasecmp (arg, "fp") == 0) + preset_target_arch = arch_sh_up & ~arch_sh_has_dsp; + else if (strcasecmp (arg, "any") == 0) + preset_target_arch = arch_sh_up; +#ifdef HAVE_SH64 + else if (strcasecmp (arg, "shmedia") == 0) + { + if (sh64_isa_mode == sh64_isa_shcompact) + as_bad (_("Invalid combination: --isa=SHcompact with --isa=SHmedia")); + sh64_isa_mode = sh64_isa_shmedia; + } + else if (strcasecmp (arg, "shcompact") == 0) + { + if (sh64_isa_mode == sh64_isa_shmedia) + as_bad (_("Invalid combination: --isa=SHmedia with --isa=SHcompact")); + if (sh64_abi == sh64_abi_64) + as_bad (_("Invalid combination: --abi=64 with --isa=SHcompact")); + sh64_isa_mode = sh64_isa_shcompact; + } +#endif /* HAVE_SH64 */ + else + { + extern const bfd_arch_info_type bfd_sh_arch; + bfd_arch_info_type const *bfd_arch = &bfd_sh_arch; + + preset_target_arch = 0; + for (; bfd_arch; bfd_arch=bfd_arch->next) + { + int len = strlen(bfd_arch->printable_name); + + if (bfd_arch->mach == bfd_mach_sh5) + continue; + + if (strncasecmp (bfd_arch->printable_name, arg, len) != 0) + continue; + + if (arg[len] == '\0') + preset_target_arch = + sh_get_arch_from_bfd_mach (bfd_arch->mach); + else if (strcasecmp(&arg[len], "-up") == 0) + preset_target_arch = + sh_get_arch_up_from_bfd_mach (bfd_arch->mach); + else + continue; + break; + } + + if (!preset_target_arch) + as_bad (_("Invalid argument to --isa option: %s"), arg); + } + break; + +#ifdef HAVE_SH64 + case OPTION_ABI: + if (strcmp (arg, "32") == 0) + { + if (sh64_abi == sh64_abi_64) + as_bad (_("Invalid combination: --abi=32 with --abi=64")); + sh64_abi = sh64_abi_32; + } + else if (strcmp (arg, "64") == 0) + { + if (sh64_abi == sh64_abi_32) + as_bad (_("Invalid combination: --abi=64 with --abi=32")); + if (sh64_isa_mode == sh64_isa_shcompact) + as_bad (_("Invalid combination: --isa=SHcompact with --abi=64")); + sh64_abi = sh64_abi_64; + } + else + as_bad (_("Invalid argument to --abi option: %s"), arg); + break; + + case OPTION_NO_MIX: + sh64_mix = FALSE; + break; + + case OPTION_SHCOMPACT_CONST_CRANGE: + sh64_shcompact_const_crange = TRUE; + break; + + case OPTION_NO_EXPAND: + sh64_expand = FALSE; break; + case OPTION_PT32: + sh64_pt32 = TRUE; + break; +#endif /* HAVE_SH64 */ + + case OPTION_H_TICK_HEX: + enable_h_tick_hex = 1; + break; + +#ifdef OBJ_ELF + case OPTION_FDPIC: + sh_fdpic = TRUE; + break; +#endif /* OBJ_ELF */ + default: return 0; } @@ -2160,24 +3322,56 @@ md_parse_option (c, arg) } void -md_show_usage (stream) - FILE *stream; +md_show_usage (FILE *stream) { fprintf (stream, _("\ SH options:\n\ --little generate little endian code\n\ --relax alter jump instructions for long displacements\n\ --small align sections to 4 byte boundaries, not 16\n\ --dsp enable sh-dsp insns, and disable sh3e / sh4 insns.\n")); +--little generate little endian code\n\ +--big generate big endian code\n\ +--relax alter jump instructions for long displacements\n\ +--renesas disable optimization with section symbol for\n\ + compatibility with Renesas assembler.\n\ +--small align sections to 4 byte boundaries, not 16\n\ +--dsp enable sh-dsp insns, and disable floating-point ISAs.\n\ +--allow-reg-prefix allow '$' as a register name prefix.\n\ +--isa=[any use most appropriate isa\n\ + | dsp same as '-dsp'\n\ + | fp")); + { + extern const bfd_arch_info_type bfd_sh_arch; + bfd_arch_info_type const *bfd_arch = &bfd_sh_arch; + + for (; bfd_arch; bfd_arch=bfd_arch->next) + if (bfd_arch->mach != bfd_mach_sh5) + { + fprintf (stream, "\n | %s", bfd_arch->printable_name); + fprintf (stream, "\n | %s-up", bfd_arch->printable_name); + } + } + fprintf (stream, "]\n"); +#ifdef HAVE_SH64 + fprintf (stream, _("\ +--isa=[shmedia set as the default instruction set for SH64\n\ + | SHmedia\n\ + | shcompact\n\ + | SHcompact]\n")); + fprintf (stream, _("\ +--abi=[32|64] set size of expanded SHmedia operands and object\n\ + file type\n\ +--shcompact-const-crange emit code-range descriptors for constants in\n\ + SHcompact code sections\n\ +--no-mix disallow SHmedia code in the same section as\n\ + constants and SHcompact code\n\ +--no-expand do not expand MOVI, PT, PTA or PTB instructions\n\ +--expand-pt32 with -abi=64, expand PT, PTA and PTB instructions\n\ + to 32 bits only\n")); +#endif /* HAVE_SH64 */ +#ifdef OBJ_ELF + fprintf (stream, _("\ +--fdpic generate an FDPIC object file\n")); +#endif /* OBJ_ELF */ } -void -tc_Nout_fix_to_chars () -{ - printf (_("call to tc_Nout_fix_to_chars \n")); - abort (); -} - /* This struct is used to pass arguments to sh_count_relocs through bfd_map_over_sections. */ @@ -2190,14 +3384,10 @@ struct sh_count_relocs }; /* Count the number of fixups in a section which refer to a particular - symbol. When using BFD_ASSEMBLER, this is called via - bfd_map_over_sections. */ + symbol. This is called via bfd_map_over_sections. */ static void -sh_count_relocs (abfd, sec, data) - bfd *abfd ATTRIBUTE_UNUSED; - segT sec; - PTR data; +sh_count_relocs (bfd *abfd ATTRIBUTE_UNUSED, segT sec, void *data) { struct sh_count_relocs *info = (struct sh_count_relocs *) data; segment_info_type *seginfo; @@ -2219,14 +3409,12 @@ sh_count_relocs (abfd, sec, data) } } -/* Handle the count relocs for a particular section. When using - BFD_ASSEMBLER, this is called via bfd_map_over_sections. */ +/* Handle the count relocs for a particular section. + This is called via bfd_map_over_sections. */ static void -sh_frob_section (abfd, sec, ignore) - bfd *abfd ATTRIBUTE_UNUSED; - segT sec; - PTR ignore ATTRIBUTE_UNUSED; +sh_frob_section (bfd *abfd ATTRIBUTE_UNUSED, segT sec, + void *ignore ATTRIBUTE_UNUSED) { segment_info_type *seginfo; fixS *fix; @@ -2235,6 +3423,21 @@ sh_frob_section (abfd, sec, ignore) if (seginfo == NULL) return; + for (fix = seginfo->fix_root; fix != NULL; fix = fix->fx_next) + { + symbolS *sym; + + sym = fix->fx_addsy; + /* Check for a local_symbol. */ + if (sym && sym->bsym == NULL) + { + struct local_symbol *ls = (struct local_symbol *)sym; + /* See if it's been converted. If so, canonicalize. */ + if (local_symbol_converted_p (ls)) + fix->fx_addsy = local_symbol_get_real_symbol (ls); + } + } + for (fix = seginfo->fix_root; fix != NULL; fix = fix->fx_next) { symbolS *sym; @@ -2252,9 +3455,6 @@ sh_frob_section (abfd, sec, ignore) || fix->fx_subsy != NULL || fix->fx_addnumber != 0 || S_GET_SEGMENT (sym) != sec -#if ! defined (BFD_ASSEMBLER) && defined (OBJ_COFF) - || S_GET_STORAGE_CLASS (sym) == C_EXT -#endif || S_IS_EXTERNAL (sym)) { as_warn_where (fix->fx_file, fix->fx_line, @@ -2294,9 +3494,6 @@ sh_frob_section (abfd, sec, ignore) || fscan->fx_subsy != NULL || fscan->fx_addnumber != 0 || S_GET_SEGMENT (sym) != sec -#if ! defined (BFD_ASSEMBLER) && defined (OBJ_COFF) - || S_GET_STORAGE_CLASS (sym) == C_EXT -#endif || S_IS_EXTERNAL (sym)) { as_warn_where (fix->fx_file, fix->fx_line, @@ -2308,16 +3505,7 @@ sh_frob_section (abfd, sec, ignore) counting the number of times we find a reference to sym. */ info.sym = sym; info.count = 0; -#ifdef BFD_ASSEMBLER - bfd_map_over_sections (stdoutput, sh_count_relocs, (PTR) &info); -#else - { - int iscan; - - for (iscan = SEG_E0; iscan < SEG_UNKNOWN; iscan++) - sh_count_relocs ((bfd *) NULL, iscan, (PTR) &info); - } -#endif + bfd_map_over_sections (stdoutput, sh_count_relocs, &info); if (info.count < 1) abort (); @@ -2326,8 +3514,8 @@ sh_frob_section (abfd, sec, ignore) We have already adjusted the value of sym to include the fragment address, so we undo that adjustment here. */ subseg_change (sec, 0); - fix_new (symbol_get_frag (sym), - S_GET_VALUE (sym) - symbol_get_frag (sym)->fr_address, + fix_new (fscan->fx_frag, + S_GET_VALUE (sym) - fscan->fx_frag->fr_address, 4, &abs_symbol, info.count, 0, BFD_RELOC_SH_COUNT); } } @@ -2343,35 +3531,23 @@ sh_frob_section (abfd, sec, ignore) the stored function address entirely. */ void -sh_frob_file () +sh_frob_file (void) { +#ifdef HAVE_SH64 + shmedia_frob_file_before_adjust (); +#endif + if (! sh_relax) return; -#ifdef BFD_ASSEMBLER - bfd_map_over_sections (stdoutput, sh_frob_section, (PTR) NULL); -#else - { - int iseg; - - for (iseg = SEG_E0; iseg < SEG_UNKNOWN; iseg++) - sh_frob_section ((bfd *) NULL, iseg, (PTR) NULL); - } -#endif + bfd_map_over_sections (stdoutput, sh_frob_section, NULL); } /* Called after relaxing. Set the correct sizes of the fragments, and create relocs so that md_apply_fix will fill in the correct values. */ void -md_convert_frag (headers, seg, fragP) -#ifdef BFD_ASSEMBLER - bfd *headers ATTRIBUTE_UNUSED; -#else - object_headers *headers; -#endif - segT seg; - fragS *fragP; +md_convert_frag (bfd *headers ATTRIBUTE_UNUSED, segT seg, fragS *fragP) { int donerelax = 0; @@ -2436,7 +3612,7 @@ md_convert_frag (headers, seg, fragP) /* Toggle the true/false bit of the bcond. */ buffer[highbyte] ^= 0x2; - /* If this is a dalayed branch, we may not put the the bra in the + /* If this is a delayed branch, we may not put the bra in the slot. So we change it to a non-delayed branch, like that: b! cond slot_label; bra disp; slot_label: slot_insn ??? We should try if swapping the conditional branch and @@ -2444,12 +3620,7 @@ md_convert_frag (headers, seg, fragP) /* Build a relocation to six / four bytes farther on. */ subseg_change (seg, 0); - fix_new (fragP, fragP->fr_fix, 2, -#ifdef BFD_ASSEMBLER - section_symbol (seg), -#else - seg_info (seg)->dot, -#endif + fix_new (fragP, fragP->fr_fix, 2, section_symbol (seg), fragP->fr_address + fragP->fr_fix + (delay ? 4 : 6), 1, BFD_RELOC_SH_PCDISP8BY2); @@ -2498,7 +3669,11 @@ md_convert_frag (headers, seg, fragP) break; default: +#ifdef HAVE_SH64 + shmedia_md_convert_frag (headers, seg, fragP, TRUE); +#else abort (); +#endif } if (donerelax && !sh_relax) @@ -2510,25 +3685,18 @@ md_convert_frag (headers, seg, fragP) } valueT -md_section_align (seg, size) - segT seg ATTRIBUTE_UNUSED; - valueT size; +md_section_align (segT seg ATTRIBUTE_UNUSED, valueT size) { -#ifdef BFD_ASSEMBLER #ifdef OBJ_ELF return size; #else /* ! OBJ_ELF */ return ((size + (1 << bfd_get_section_alignment (stdoutput, seg)) - 1) - & (-1 << bfd_get_section_alignment (stdoutput, seg))); + & -(1 << bfd_get_section_alignment (stdoutput, seg))); #endif /* ! OBJ_ELF */ -#else /* ! BFD_ASSEMBLER */ - return ((size + (1 << section_alignment[(int) seg]) - 1) - & (-1 << section_alignment[(int) seg])); -#endif /* ! BFD_ASSEMBLER */ } /* This static variable is set by s_uacons to tell sh_cons_align that - the expession does not need to be aligned. */ + the expression does not need to be aligned. */ static int sh_no_align_cons = 0; @@ -2537,8 +3705,7 @@ static int sh_no_align_cons = 0; to be aligned. */ static void -s_uacons (bytes) - int bytes; +s_uacons (int bytes) { /* Tell sh_cons_align not to align this value. */ sh_no_align_cons = 1; @@ -2552,11 +3719,9 @@ s_uacons (bytes) enable this warning? */ void -sh_cons_align (nbytes) - int nbytes; +sh_cons_align (int nbytes) { int nalign; - char *p; if (sh_no_align_cons) { @@ -2582,8 +3747,8 @@ sh_cons_align (nbytes) return; } - p = frag_var (rs_align_code, 1, 1, (relax_substateT) 0, - (symbolS *) NULL, (offsetT) nalign, (char *) NULL); + frag_var (rs_align_test, 1, 1, (relax_substateT) 0, + (symbolS *) NULL, (offsetT) nalign, (char *) NULL); record_alignment (now_seg, nalign); } @@ -2593,60 +3758,87 @@ sh_cons_align (nbytes) also where we check for misaligned data. */ void -sh_handle_align (frag) - fragS *frag; +sh_handle_align (fragS *frag) { + int bytes = frag->fr_next->fr_address - frag->fr_address - frag->fr_fix; + + if (frag->fr_type == rs_align_code) + { + static const unsigned char big_nop_pattern[] = { 0x00, 0x09 }; + static const unsigned char little_nop_pattern[] = { 0x09, 0x00 }; + + char *p = frag->fr_literal + frag->fr_fix; + + if (bytes & 1) + { + *p++ = 0; + bytes--; + frag->fr_fix += 1; + } + + if (target_big_endian) + { + memcpy (p, big_nop_pattern, sizeof big_nop_pattern); + frag->fr_var = sizeof big_nop_pattern; + } + else + { + memcpy (p, little_nop_pattern, sizeof little_nop_pattern); + frag->fr_var = sizeof little_nop_pattern; + } + } + else if (frag->fr_type == rs_align_test) + { + if (bytes != 0) + as_bad_where (frag->fr_file, frag->fr_line, _("misaligned data")); + } + if (sh_relax - && frag->fr_type == rs_align + && (frag->fr_type == rs_align + || frag->fr_type == rs_align_code) && frag->fr_address + frag->fr_fix > 0 && frag->fr_offset > 1 && now_seg != bss_section) fix_new (frag, frag->fr_fix, 2, &abs_symbol, frag->fr_offset, 0, BFD_RELOC_SH_ALIGN); - - if (frag->fr_type == rs_align_code - && frag->fr_next->fr_address - frag->fr_address - frag->fr_fix != 0) - as_warn_where (frag->fr_file, frag->fr_line, _("misaligned data")); } -/* This macro decides whether a particular reloc is an entry in a - switch table. It is used when relaxing, because the linker needs - to know about all such entries so that it can adjust them if - necessary. */ - -#ifdef BFD_ASSEMBLER -#define SWITCH_TABLE_CONS(fix) (0) -#else -#define SWITCH_TABLE_CONS(fix) \ - ((fix)->fx_r_type == 0 \ - && ((fix)->fx_size == 2 \ - || (fix)->fx_size == 1 \ - || (fix)->fx_size == 4)) -#endif +/* See whether the relocation should be resolved locally. */ -#define SWITCH_TABLE(fix) \ - ((fix)->fx_addsy != NULL \ - && (fix)->fx_subsy != NULL \ - && S_GET_SEGMENT ((fix)->fx_addsy) == text_section \ - && S_GET_SEGMENT ((fix)->fx_subsy) == text_section \ - && ((fix)->fx_r_type == BFD_RELOC_32 \ - || (fix)->fx_r_type == BFD_RELOC_16 \ - || (fix)->fx_r_type == BFD_RELOC_8 \ - || SWITCH_TABLE_CONS (fix))) +static bfd_boolean +sh_local_pcrel (fixS *fix) +{ + return (! sh_relax + && (fix->fx_r_type == BFD_RELOC_SH_PCDISP8BY2 + || fix->fx_r_type == BFD_RELOC_SH_PCDISP12BY2 + || fix->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY2 + || fix->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY4 + || fix->fx_r_type == BFD_RELOC_8_PCREL + || fix->fx_r_type == BFD_RELOC_SH_SWITCH16 + || fix->fx_r_type == BFD_RELOC_SH_SWITCH32)); +} /* See whether we need to force a relocation into the output file. This is used to force out switch and PC relative relocations when relaxing. */ int -sh_force_relocation (fix) - fixS *fix; +sh_force_relocation (fixS *fix) { + /* These relocations can't make it into a DSO, so no use forcing + them for global symbols. */ + if (sh_local_pcrel (fix)) + return 0; - if (fix->fx_r_type == BFD_RELOC_VTABLE_INHERIT - || fix->fx_r_type == BFD_RELOC_VTABLE_ENTRY - || fix->fx_r_type == BFD_RELOC_SH_LOOP_START - || fix->fx_r_type == BFD_RELOC_SH_LOOP_END) + /* Make sure some relocations get emitted. */ + if (fix->fx_r_type == BFD_RELOC_SH_LOOP_START + || fix->fx_r_type == BFD_RELOC_SH_LOOP_END + || fix->fx_r_type == BFD_RELOC_SH_TLS_GD_32 + || fix->fx_r_type == BFD_RELOC_SH_TLS_LD_32 + || fix->fx_r_type == BFD_RELOC_SH_TLS_IE_32 + || fix->fx_r_type == BFD_RELOC_SH_TLS_LDO_32 + || fix->fx_r_type == BFD_RELOC_SH_TLS_LE_32 + || generic_force_reloc (fix)) return 1; if (! sh_relax) @@ -2658,29 +3850,26 @@ sh_force_relocation (fix) || fix->fx_r_type == BFD_RELOC_SH_ALIGN || fix->fx_r_type == BFD_RELOC_SH_CODE || fix->fx_r_type == BFD_RELOC_SH_DATA +#ifdef HAVE_SH64 + || fix->fx_r_type == BFD_RELOC_SH_SHMEDIA_CODE +#endif || fix->fx_r_type == BFD_RELOC_SH_LABEL); } #ifdef OBJ_ELF -boolean -sh_fix_adjustable (fixP) - fixS *fixP; +bfd_boolean +sh_fix_adjustable (fixS *fixP) { - - if (fixP->fx_addsy == NULL) - return 1; - - if (fixP->fx_r_type == BFD_RELOC_SH_PCDISP8BY2 - || fixP->fx_r_type == BFD_RELOC_SH_PCDISP12BY2 - || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY2 - || fixP->fx_r_type == BFD_RELOC_SH_PCRELIMM8BY4 - || fixP->fx_r_type == BFD_RELOC_8_PCREL - || fixP->fx_r_type == BFD_RELOC_SH_SWITCH16 - || fixP->fx_r_type == BFD_RELOC_SH_SWITCH32) - return 1; - - if (! TC_RELOC_RTSYM_LOC_FIXUP (fixP) - || fixP->fx_r_type == BFD_RELOC_32_GOTOFF + if (fixP->fx_r_type == BFD_RELOC_32_PLT_PCREL + || fixP->fx_r_type == BFD_RELOC_32_GOT_PCREL + || fixP->fx_r_type == BFD_RELOC_SH_GOT20 + || fixP->fx_r_type == BFD_RELOC_SH_GOTPC + || fixP->fx_r_type == BFD_RELOC_SH_GOTFUNCDESC + || fixP->fx_r_type == BFD_RELOC_SH_GOTFUNCDESC20 + || fixP->fx_r_type == BFD_RELOC_SH_GOTOFFFUNCDESC + || fixP->fx_r_type == BFD_RELOC_SH_GOTOFFFUNCDESC20 + || fixP->fx_r_type == BFD_RELOC_SH_FUNCDESC + || ((fixP->fx_r_type == BFD_RELOC_32) && dont_adjust_reloc_32) || fixP->fx_r_type == BFD_RELOC_RVA) return 0; @@ -2693,63 +3882,94 @@ sh_fix_adjustable (fixP) } void -sh_elf_final_processing () +sh_elf_final_processing (void) { int val; /* Set file-specific flags to indicate if this code needs - a processor with the sh-dsp / sh3e ISA to execute. */ - if (valid_arch & arch_sh1) - val = EF_SH1; - else if (valid_arch & arch_sh2) - val = EF_SH2; - else if (valid_arch & arch_sh_dsp) - val = EF_SH_DSP; - else if (valid_arch & arch_sh3) - val = EF_SH3; - else if (valid_arch & arch_sh3_dsp) - val = EF_SH_DSP; - else if (valid_arch & arch_sh3e) - val = EF_SH3E; - else if (valid_arch & arch_sh4) - val = EF_SH4; + a processor with the sh-dsp / sh2e ISA to execute. */ +#ifdef HAVE_SH64 + /* SH5 and above don't know about the valid_arch arch_sh* bits defined + in sh-opc.h, so check SH64 mode before checking valid_arch. */ + if (sh64_isa_mode != sh64_isa_unspecified) + val = EF_SH5; else - abort (); +#elif defined TARGET_SYMBIAN + if (1) + { + extern int sh_symbian_find_elf_flags (unsigned int); + + val = sh_symbian_find_elf_flags (valid_arch); + } + else +#endif /* HAVE_SH64 */ + val = sh_find_elf_flags (valid_arch); elf_elfheader (stdoutput)->e_flags &= ~EF_SH_MACH_MASK; elf_elfheader (stdoutput)->e_flags |= val; + + if (sh_fdpic) + elf_elfheader (stdoutput)->e_flags |= EF_SH_FDPIC; +} +#endif + +#ifdef TE_UCLINUX +/* Return the target format for uClinux. */ + +const char * +sh_uclinux_target_format (void) +{ + if (sh_fdpic) + return (!target_big_endian ? "elf32-sh-fdpic" : "elf32-shbig-fdpic"); + else + return (!target_big_endian ? "elf32-shl" : "elf32-sh"); } #endif +/* Apply fixup FIXP to SIZE-byte field BUF given that VAL is its + assembly-time value. If we're generating a reloc for FIXP, + see whether the addend should be stored in-place or whether + it should be in an ELF r_addend field. */ + +static void +apply_full_field_fix (fixS *fixP, char *buf, bfd_vma val, int size) +{ + reloc_howto_type *howto; + + if (fixP->fx_addsy != NULL || fixP->fx_pcrel) + { + howto = bfd_reloc_type_lookup (stdoutput, fixP->fx_r_type); + if (howto && !howto->partial_inplace) + { + fixP->fx_addnumber = val; + return; + } + } + md_number_to_chars (buf, val, size); +} + /* Apply a fixup to the object file. */ -#ifdef BFD_ASSEMBLER -int -md_apply_fix (fixP, valp) - fixS *fixP; - valueT *valp; -#else void -md_apply_fix (fixP, val) - fixS *fixP; - long val; -#endif +md_apply_fix (fixS *fixP, valueT *valP, segT seg ATTRIBUTE_UNUSED) { char *buf = fixP->fx_where + fixP->fx_frag->fr_literal; int lowbyte = target_big_endian ? 1 : 0; int highbyte = target_big_endian ? 0 : 1; -#ifdef BFD_ASSEMBLER - long val = *valp; -#endif + long val = (long) *valP; long max, min; int shift; -#ifdef BFD_ASSEMBLER /* A difference between two symbols, the second of which is in the current section, is transformed in a PC-relative relocation to the other symbol. We have to adjust the relocation type here. */ if (fixP->fx_pcrel) { +#ifndef HAVE_SH64 + /* Safeguard; this must not occur for non-sh64 configurations. */ + gas_assert (fixP->fx_r_type != BFD_RELOC_64); +#endif + switch (fixP->fx_r_type) { default: @@ -2766,11 +3986,11 @@ md_apply_fix (fixP, val) we need. FIXME. */ case BFD_RELOC_16: bfd_set_error (bfd_error_bad_value); - return false; + return; case BFD_RELOC_8: bfd_set_error (bfd_error_bad_value); - return false; + return; } } @@ -2790,26 +4010,65 @@ md_apply_fix (fixP, val) && fixP->fx_addsy != NULL && S_IS_WEAK (fixP->fx_addsy)) val -= S_GET_VALUE (fixP->fx_addsy); -#endif -#ifndef BFD_ASSEMBLER - if (fixP->fx_r_type == 0) - { - if (fixP->fx_size == 2) - fixP->fx_r_type = BFD_RELOC_16; - else if (fixP->fx_size == 4) - fixP->fx_r_type = BFD_RELOC_32; - else if (fixP->fx_size == 1) - fixP->fx_r_type = BFD_RELOC_8; - else - abort (); - } -#endif + if (SWITCH_TABLE (fixP)) + val -= S_GET_VALUE (fixP->fx_subsy); max = min = 0; shift = 0; switch (fixP->fx_r_type) { + case BFD_RELOC_SH_IMM3: + max = 0x7; + * buf = (* buf & 0xf8) | (val & 0x7); + break; + case BFD_RELOC_SH_IMM3U: + max = 0x7; + * buf = (* buf & 0x8f) | ((val & 0x7) << 4); + break; + case BFD_RELOC_SH_DISP12: + max = 0xfff; + buf[lowbyte] = val & 0xff; + buf[highbyte] |= (val >> 8) & 0x0f; + break; + case BFD_RELOC_SH_DISP12BY2: + max = 0xfff; + shift = 1; + buf[lowbyte] = (val >> 1) & 0xff; + buf[highbyte] |= (val >> 9) & 0x0f; + break; + case BFD_RELOC_SH_DISP12BY4: + max = 0xfff; + shift = 2; + buf[lowbyte] = (val >> 2) & 0xff; + buf[highbyte] |= (val >> 10) & 0x0f; + break; + case BFD_RELOC_SH_DISP12BY8: + max = 0xfff; + shift = 3; + buf[lowbyte] = (val >> 3) & 0xff; + buf[highbyte] |= (val >> 11) & 0x0f; + break; + case BFD_RELOC_SH_DISP20: + if (! target_big_endian) + abort(); + max = 0x7ffff; + min = -0x80000; + buf[1] = (buf[1] & 0x0f) | ((val >> 12) & 0xf0); + buf[2] = (val >> 8) & 0xff; + buf[3] = val & 0xff; + break; + case BFD_RELOC_SH_DISP20BY8: + if (!target_big_endian) + abort(); + max = 0x7ffff; + min = -0x80000; + shift = 8; + buf[1] = (buf[1] & 0x0f) | ((val >> 20) & 0xf0); + buf[2] = (val >> 16) & 0xff; + buf[3] = (val >> 8) & 0xff; + break; + case BFD_RELOC_SH_IMM4: max = 0xf; *buf = (*buf & 0xf0) | (val & 0xf); @@ -2851,9 +4110,26 @@ md_apply_fix (fixP, val) break; case BFD_RELOC_SH_PCRELIMM8BY4: + /* If we are dealing with a known destination ... */ + if ((fixP->fx_addsy == NULL || S_IS_DEFINED (fixP->fx_addsy)) + && (fixP->fx_subsy == NULL || S_IS_DEFINED (fixP->fx_addsy))) + { + /* Don't silently move the destination due to misalignment. + The absolute address is the fragment base plus the offset into + the fragment plus the pc relative offset to the label. */ + if ((fixP->fx_frag->fr_address + fixP->fx_where + val) & 3) + as_bad_where (fixP->fx_file, fixP->fx_line, + _("offset to unaligned destination")); + + /* The displacement cannot be zero or backward even if aligned. + Allow -2 because val has already been adjusted somewhere. */ + if (val < -2) + as_bad_where (fixP->fx_file, fixP->fx_line, _("negative offset")); + } + /* The lower two bits of the PC are cleared before the displacement is added in. We can assume that the destination - is on a 4 byte bounday. If this instruction is also on a 4 + is on a 4 byte boundary. If this instruction is also on a 4 byte boundary, then we want (target - here) / 4 and target - here is a multiple of 4. @@ -2892,17 +4168,23 @@ md_apply_fix (fixP, val) buf[highbyte] |= (val >> 8) & 0xf; break; +#ifndef HAVE_SH64 + case BFD_RELOC_64: + apply_full_field_fix (fixP, buf, *valP, 8); + break; +#endif + case BFD_RELOC_32: case BFD_RELOC_32_PCREL: - md_number_to_chars (buf, val, 4); + apply_full_field_fix (fixP, buf, val, 4); break; case BFD_RELOC_16: - md_number_to_chars (buf, val, 2); + apply_full_field_fix (fixP, buf, val, 2); break; case BFD_RELOC_SH_USES: - /* Pass the value into sh_coff_reloc_mangle. */ + /* Pass the value into sh_reloc(). */ fixP->fx_addnumber = val; break; @@ -2920,17 +4202,17 @@ md_apply_fix (fixP, val) case BFD_RELOC_VTABLE_INHERIT: case BFD_RELOC_VTABLE_ENTRY: fixP->fx_done = 0; -#ifdef BFD_ASSEMBLER - return 0; -#else return; -#endif #ifdef OBJ_ELF case BFD_RELOC_32_PLT_PCREL: /* Make the jump instruction point to the address of the operand. At runtime we merely add the offset to the actual PLT entry. */ - *valp = 0xfffffffc; + * valP = 0xfffffffc; + val = fixP->fx_offset; + if (fixP->fx_subsy) + val -= S_GET_VALUE (fixP->fx_subsy); + apply_full_field_fix (fixP, buf, val, 4); break; case BFD_RELOC_SH_GOTPC: @@ -2950,21 +4232,44 @@ md_apply_fix (fixP, val) earlier versions of the PIC patches, the pcrel_adjust field was used to store the correction, but since the expression is not pcrel, I felt it would be confusing to do it this way. */ - *valp -= 1; - md_number_to_chars (buf, val, 4); + * valP -= 1; + apply_full_field_fix (fixP, buf, val, 4); break; + case BFD_RELOC_SH_TLS_GD_32: + case BFD_RELOC_SH_TLS_LD_32: + case BFD_RELOC_SH_TLS_IE_32: + S_SET_THREAD_LOCAL (fixP->fx_addsy); + /* Fallthrough */ case BFD_RELOC_32_GOT_PCREL: - *valp = 0; /* Fully resolved at runtime. No addend. */ - md_number_to_chars (buf, 0, 4); + case BFD_RELOC_SH_GOT20: + case BFD_RELOC_SH_GOTPLT32: + case BFD_RELOC_SH_GOTFUNCDESC: + case BFD_RELOC_SH_GOTFUNCDESC20: + case BFD_RELOC_SH_GOTOFFFUNCDESC: + case BFD_RELOC_SH_GOTOFFFUNCDESC20: + case BFD_RELOC_SH_FUNCDESC: + * valP = 0; /* Fully resolved at runtime. No addend. */ + apply_full_field_fix (fixP, buf, 0, 4); break; + case BFD_RELOC_SH_TLS_LDO_32: + case BFD_RELOC_SH_TLS_LE_32: + S_SET_THREAD_LOCAL (fixP->fx_addsy); + /* Fallthrough */ case BFD_RELOC_32_GOTOFF: + case BFD_RELOC_SH_GOTOFF20: + apply_full_field_fix (fixP, buf, val, 4); break; #endif default: +#ifdef HAVE_SH64 + shmedia_md_apply_fix (fixP, valP); + return; +#else abort (); +#endif } if (shift != 0) @@ -2977,301 +4282,144 @@ md_apply_fix (fixP, val) val = ((val >> shift) | ((long) -1 & ~ ((long) -1 >> shift))); } + + /* Extend sign for 64-bit host. */ + val = ((val & 0xffffffff) ^ 0x80000000) - 0x80000000; if (max != 0 && (val < min || val > max)) as_bad_where (fixP->fx_file, fixP->fx_line, _("offset out of range")); - -#ifdef BFD_ASSEMBLER - return 0; -#endif + else if (max != 0) + /* Stop the generic code from trying to overlow check the value as well. + It may not have the correct value anyway, as we do not store val back + into *valP. */ + fixP->fx_no_overflow = 1; + + if (fixP->fx_addsy == NULL && fixP->fx_pcrel == 0) + fixP->fx_done = 1; } /* Called just before address relaxation. Return the length by which a fragment must grow to reach it's destination. */ int -md_estimate_size_before_relax (fragP, segment_type) - register fragS *fragP; - register segT segment_type; +md_estimate_size_before_relax (fragS *fragP, segT segment_type) { + int what; + switch (fragP->fr_subtype) { + default: +#ifdef HAVE_SH64 + return shmedia_md_estimate_size_before_relax (fragP, segment_type); +#else + abort (); +#endif + + case C (UNCOND_JUMP, UNDEF_DISP): /* Used to be a branch to somewhere which was unknown. */ if (!fragP->fr_symbol) { fragP->fr_subtype = C (UNCOND_JUMP, UNCOND12); - fragP->fr_var = md_relax_table[C (UNCOND_JUMP, UNCOND12)].rlx_length; } else if (S_GET_SEGMENT (fragP->fr_symbol) == segment_type) { fragP->fr_subtype = C (UNCOND_JUMP, UNCOND12); - fragP->fr_var = md_relax_table[C (UNCOND_JUMP, UNCOND12)].rlx_length; } else { fragP->fr_subtype = C (UNCOND_JUMP, UNDEF_WORD_DISP); - fragP->fr_var = md_relax_table[C (UNCOND_JUMP, UNCOND32)].rlx_length; - return md_relax_table[C (UNCOND_JUMP, UNCOND32)].rlx_length; } break; - default: - abort (); case C (COND_JUMP, UNDEF_DISP): case C (COND_JUMP_DELAY, UNDEF_DISP): + what = GET_WHAT (fragP->fr_subtype); /* Used to be a branch to somewhere which was unknown. */ if (fragP->fr_symbol && S_GET_SEGMENT (fragP->fr_symbol) == segment_type) { - int what = GET_WHAT (fragP->fr_subtype); /* Got a symbol and it's defined in this segment, become byte sized - maybe it will fix up. */ fragP->fr_subtype = C (what, COND8); - fragP->fr_var = md_relax_table[C (what, COND8)].rlx_length; } else if (fragP->fr_symbol) { - int what = GET_WHAT (fragP->fr_subtype); /* Its got a segment, but its not ours, so it will always be long. */ fragP->fr_subtype = C (what, UNDEF_WORD_DISP); - fragP->fr_var = md_relax_table[C (what, COND32)].rlx_length; - return md_relax_table[C (what, COND32)].rlx_length; } else { - int what = GET_WHAT (fragP->fr_subtype); /* We know the abs value. */ fragP->fr_subtype = C (what, COND8); - fragP->fr_var = md_relax_table[C (what, COND8)].rlx_length; } + break; + case C (UNCOND_JUMP, UNCOND12): + case C (UNCOND_JUMP, UNCOND32): + case C (UNCOND_JUMP, UNDEF_WORD_DISP): + case C (COND_JUMP, COND8): + case C (COND_JUMP, COND12): + case C (COND_JUMP, COND32): + case C (COND_JUMP, UNDEF_WORD_DISP): + case C (COND_JUMP_DELAY, COND8): + case C (COND_JUMP_DELAY, COND12): + case C (COND_JUMP_DELAY, COND32): + case C (COND_JUMP_DELAY, UNDEF_WORD_DISP): + /* When relaxing a section for the second time, we don't need to + do anything besides return the current size. */ break; } + + fragP->fr_var = md_relax_table[fragP->fr_subtype].rlx_length; return fragP->fr_var; } /* Put number into target byte order. */ void -md_number_to_chars (ptr, use, nbytes) - char *ptr; - valueT use; - int nbytes; +md_number_to_chars (char *ptr, valueT use, int nbytes) { +#ifdef HAVE_SH64 + /* We might need to set the contents type to data. */ + sh64_flag_output (); +#endif + if (! target_big_endian) number_to_chars_littleendian (ptr, use, nbytes); else number_to_chars_bigendian (ptr, use, nbytes); } +/* This version is used in obj-coff.c eg. for the sh-hms target. */ + long -md_pcrel_from (fixP) - fixS *fixP; +md_pcrel_from (fixS *fixP) { return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address + 2; } -#ifdef OBJ_COFF - -int -tc_coff_sizemachdep (frag) - fragS *frag; -{ - return md_relax_table[frag->fr_subtype].rlx_length; -} - -#endif /* OBJ_COFF */ - -/* When we align the .text section, insert the correct NOP pattern. */ - -int -sh_do_align (n, fill, len, max) - int n; - const char *fill; - int len ATTRIBUTE_UNUSED; - int max; -{ - if (fill == NULL - && subseg_text_p (now_seg) - && n > 1) - { - static const unsigned char big_nop_pattern[] = { 0x00, 0x09 }; - static const unsigned char little_nop_pattern[] = { 0x09, 0x00 }; - - /* First align to a 2 byte boundary, in case there is an odd - .byte. */ - frag_align (1, 0, 0); - if (target_big_endian) - frag_align_pattern (n, big_nop_pattern, sizeof big_nop_pattern, max); - else - frag_align_pattern (n, little_nop_pattern, sizeof little_nop_pattern, - max); - return 1; - } - - return 0; -} - -#ifndef BFD_ASSEMBLER -#ifdef OBJ_COFF - -/* Map BFD relocs to SH COFF relocs. */ - -struct reloc_map -{ - bfd_reloc_code_real_type bfd_reloc; - int sh_reloc; -}; - -static const struct reloc_map coff_reloc_map[] = -{ - { BFD_RELOC_32, R_SH_IMM32 }, - { BFD_RELOC_16, R_SH_IMM16 }, - { BFD_RELOC_8, R_SH_IMM8 }, - { BFD_RELOC_SH_PCDISP8BY2, R_SH_PCDISP8BY2 }, - { BFD_RELOC_SH_PCDISP12BY2, R_SH_PCDISP }, - { BFD_RELOC_SH_IMM4, R_SH_IMM4 }, - { BFD_RELOC_SH_IMM4BY2, R_SH_IMM4BY2 }, - { BFD_RELOC_SH_IMM4BY4, R_SH_IMM4BY4 }, - { BFD_RELOC_SH_IMM8, R_SH_IMM8 }, - { BFD_RELOC_SH_IMM8BY2, R_SH_IMM8BY2 }, - { BFD_RELOC_SH_IMM8BY4, R_SH_IMM8BY4 }, - { BFD_RELOC_SH_PCRELIMM8BY2, R_SH_PCRELIMM8BY2 }, - { BFD_RELOC_SH_PCRELIMM8BY4, R_SH_PCRELIMM8BY4 }, - { BFD_RELOC_8_PCREL, R_SH_SWITCH8 }, - { BFD_RELOC_SH_SWITCH16, R_SH_SWITCH16 }, - { BFD_RELOC_SH_SWITCH32, R_SH_SWITCH32 }, - { BFD_RELOC_SH_USES, R_SH_USES }, - { BFD_RELOC_SH_COUNT, R_SH_COUNT }, - { BFD_RELOC_SH_ALIGN, R_SH_ALIGN }, - { BFD_RELOC_SH_CODE, R_SH_CODE }, - { BFD_RELOC_SH_DATA, R_SH_DATA }, - { BFD_RELOC_SH_LABEL, R_SH_LABEL }, - { BFD_RELOC_UNUSED, 0 } -}; - -/* Adjust a reloc for the SH. This is similar to the generic code, - but does some minor tweaking. */ - -void -sh_coff_reloc_mangle (seg, fix, intr, paddr) - segment_info_type *seg; - fixS *fix; - struct internal_reloc *intr; - unsigned int paddr; +long +md_pcrel_from_section (fixS *fixP, segT sec) { - symbolS *symbol_ptr = fix->fx_addsy; - symbolS *dot; - - intr->r_vaddr = paddr + fix->fx_frag->fr_address + fix->fx_where; - - if (! SWITCH_TABLE (fix)) - { - const struct reloc_map *rm; - - for (rm = coff_reloc_map; rm->bfd_reloc != BFD_RELOC_UNUSED; rm++) - if (rm->bfd_reloc == (bfd_reloc_code_real_type) fix->fx_r_type) - break; - if (rm->bfd_reloc == BFD_RELOC_UNUSED) - as_bad_where (fix->fx_file, fix->fx_line, - _("Can not represent %s relocation in this object file format"), - bfd_get_reloc_code_name (fix->fx_r_type)); - intr->r_type = rm->sh_reloc; - intr->r_offset = 0; - } - else - { - know (sh_relax); - - if (fix->fx_r_type == BFD_RELOC_16) - intr->r_type = R_SH_SWITCH16; - else if (fix->fx_r_type == BFD_RELOC_8) - intr->r_type = R_SH_SWITCH8; - else if (fix->fx_r_type == BFD_RELOC_32) - intr->r_type = R_SH_SWITCH32; - else - abort (); - - /* For a switch reloc, we set r_offset to the difference between - the reloc address and the subtrahend. When the linker is - doing relaxing, it can use the determine the starting and - ending points of the switch difference expression. */ - intr->r_offset = intr->r_vaddr - S_GET_VALUE (fix->fx_subsy); - } - - /* PC relative relocs are always against the current section. */ - if (symbol_ptr == NULL) - { - switch (fix->fx_r_type) - { - case BFD_RELOC_SH_PCRELIMM8BY2: - case BFD_RELOC_SH_PCRELIMM8BY4: - case BFD_RELOC_SH_PCDISP8BY2: - case BFD_RELOC_SH_PCDISP12BY2: - case BFD_RELOC_SH_USES: - symbol_ptr = seg->dot; - break; - default: - break; - } - } - - if (fix->fx_r_type == BFD_RELOC_SH_USES) - { - /* We can't store the offset in the object file, since this - reloc does not take up any space, so we store it in r_offset. - The fx_addnumber field was set in md_apply_fix. */ - intr->r_offset = fix->fx_addnumber; - } - else if (fix->fx_r_type == BFD_RELOC_SH_COUNT) - { - /* We can't store the count in the object file, since this reloc - does not take up any space, so we store it in r_offset. The - fx_offset field was set when the fixup was created in - sh_coff_frob_file. */ - intr->r_offset = fix->fx_offset; - /* This reloc is always absolute. */ - symbol_ptr = NULL; - } - else if (fix->fx_r_type == BFD_RELOC_SH_ALIGN) + if (! sh_local_pcrel (fixP) + && fixP->fx_addsy != (symbolS *) NULL + && (generic_force_reloc (fixP) + || S_GET_SEGMENT (fixP->fx_addsy) != sec)) { - /* Store the alignment in the r_offset field. */ - intr->r_offset = fix->fx_offset; - /* This reloc is always absolute. */ - symbol_ptr = NULL; - } - else if (fix->fx_r_type == BFD_RELOC_SH_CODE - || fix->fx_r_type == BFD_RELOC_SH_DATA - || fix->fx_r_type == BFD_RELOC_SH_LABEL) - { - /* These relocs are always absolute. */ - symbol_ptr = NULL; + /* The symbol is undefined (or is defined but not in this section, + or we're not sure about it being the final definition). Let the + linker figure it out. We need to adjust the subtraction of a + symbol to the position of the relocated data, though. */ + return fixP->fx_subsy ? fixP->fx_where + fixP->fx_frag->fr_address : 0; } - /* Turn the segment of the symbol into an offset. */ - if (symbol_ptr != NULL) - { - dot = segment_info[S_GET_SEGMENT (symbol_ptr)].dot; - if (dot != NULL) - intr->r_symndx = dot->sy_number; - else - intr->r_symndx = symbol_ptr->sy_number; - } - else - intr->r_symndx = -1; + return md_pcrel_from (fixP); } -#endif /* OBJ_COFF */ -#endif /* ! BFD_ASSEMBLER */ - -#ifdef BFD_ASSEMBLER - /* Create a reloc. */ arelent * -tc_gen_reloc (section, fixp) - asection *section ATTRIBUTE_UNUSED; - fixS *fixp; +tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp) { arelent *rel; bfd_reloc_code_real_type r_type; @@ -3285,7 +4433,8 @@ tc_gen_reloc (section, fixp) if (SWITCH_TABLE (fixp)) { - rel->addend = rel->address - S_GET_VALUE (fixp->fx_subsy); + *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_subsy); + rel->addend = rel->address - S_GET_VALUE(fixp->fx_subsy); if (r_type == BFD_RELOC_16) r_type = BFD_RELOC_SH_SWITCH16; else if (r_type == BFD_RELOC_8) @@ -3312,14 +4461,15 @@ tc_gen_reloc (section, fixp) rel->addend = 0; rel->address = rel->addend = fixp->fx_offset; } - else if (fixp->fx_pcrel) - rel->addend = fixp->fx_addnumber; - else if (r_type == BFD_RELOC_32 || r_type == BFD_RELOC_32_GOTOFF) - rel->addend = fixp->fx_addnumber; +#ifdef HAVE_SH64 + else if (shmedia_init_reloc (rel, fixp)) + ; +#endif else - rel->addend = 0; + rel->addend = fixp->fx_addnumber; rel->howto = bfd_reloc_type_lookup (stdoutput, r_type); + if (rel->howto == NULL) { as_bad_where (fixp->fx_file, fixp->fx_line, @@ -3327,10 +4477,164 @@ tc_gen_reloc (section, fixp) bfd_get_reloc_code_name (r_type)); /* Set howto to a garbage value so that we can keep going. */ rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32); - assert (rel->howto != NULL); + gas_assert (rel->howto != NULL); } +#ifdef OBJ_ELF + else if (rel->howto->type == R_SH_IND12W) + rel->addend += fixp->fx_offset - 4; +#endif return rel; } -#endif /* BFD_ASSEMBLER */ +#ifdef OBJ_ELF +inline static char * +sh_end_of_match (char *cont, const char *what) +{ + int len = strlen (what); + + if (strncasecmp (cont, what, strlen (what)) == 0 + && ! is_part_of_name (cont[len])) + return cont + len; + + return NULL; +} + +int +sh_parse_name (char const *name, + expressionS *exprP, + enum expr_mode mode, + char *nextcharP) +{ + char *next = input_line_pointer; + char *next_end; + int reloc_type; + segT segment; + + exprP->X_op_symbol = NULL; + + if (strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0) + { + if (! GOT_symbol) + GOT_symbol = symbol_find_or_make (name); + + exprP->X_add_symbol = GOT_symbol; + no_suffix: + /* If we have an absolute symbol or a reg, then we know its + value now. */ + segment = S_GET_SEGMENT (exprP->X_add_symbol); + if (mode != expr_defer && segment == absolute_section) + { + exprP->X_op = O_constant; + exprP->X_add_number = S_GET_VALUE (exprP->X_add_symbol); + exprP->X_add_symbol = NULL; + } + else if (mode != expr_defer && segment == reg_section) + { + exprP->X_op = O_register; + exprP->X_add_number = S_GET_VALUE (exprP->X_add_symbol); + exprP->X_add_symbol = NULL; + } + else + { + exprP->X_op = O_symbol; + exprP->X_add_number = 0; + } + + return 1; + } + + exprP->X_add_symbol = symbol_find_or_make (name); + + if (*nextcharP != '@') + goto no_suffix; + else if ((next_end = sh_end_of_match (next + 1, "GOTOFF"))) + reloc_type = BFD_RELOC_32_GOTOFF; + else if ((next_end = sh_end_of_match (next + 1, "GOTPLT"))) + reloc_type = BFD_RELOC_SH_GOTPLT32; + else if ((next_end = sh_end_of_match (next + 1, "GOT"))) + reloc_type = BFD_RELOC_32_GOT_PCREL; + else if ((next_end = sh_end_of_match (next + 1, "PLT"))) + reloc_type = BFD_RELOC_32_PLT_PCREL; + else if ((next_end = sh_end_of_match (next + 1, "TLSGD"))) + reloc_type = BFD_RELOC_SH_TLS_GD_32; + else if ((next_end = sh_end_of_match (next + 1, "TLSLDM"))) + reloc_type = BFD_RELOC_SH_TLS_LD_32; + else if ((next_end = sh_end_of_match (next + 1, "GOTTPOFF"))) + reloc_type = BFD_RELOC_SH_TLS_IE_32; + else if ((next_end = sh_end_of_match (next + 1, "TPOFF"))) + reloc_type = BFD_RELOC_SH_TLS_LE_32; + else if ((next_end = sh_end_of_match (next + 1, "DTPOFF"))) + reloc_type = BFD_RELOC_SH_TLS_LDO_32; + else if ((next_end = sh_end_of_match (next + 1, "PCREL"))) + reloc_type = BFD_RELOC_32_PCREL; + else if ((next_end = sh_end_of_match (next + 1, "GOTFUNCDESC"))) + reloc_type = BFD_RELOC_SH_GOTFUNCDESC; + else if ((next_end = sh_end_of_match (next + 1, "GOTOFFFUNCDESC"))) + reloc_type = BFD_RELOC_SH_GOTOFFFUNCDESC; + else if ((next_end = sh_end_of_match (next + 1, "FUNCDESC"))) + reloc_type = BFD_RELOC_SH_FUNCDESC; + else + goto no_suffix; + + *input_line_pointer = *nextcharP; + input_line_pointer = next_end; + *nextcharP = *input_line_pointer; + *input_line_pointer = '\0'; + + exprP->X_op = O_PIC_reloc; + exprP->X_add_number = 0; + exprP->X_md = reloc_type; + + return 1; +} + +void +sh_cfi_frame_initial_instructions (void) +{ + cfi_add_CFA_def_cfa (15, 0); +} + +int +sh_regname_to_dw2regnum (char *regname) +{ + unsigned int regnum = -1; + unsigned int i; + const char *p; + char *q; + static struct { const char *name; int dw2regnum; } regnames[] = + { + { "pr", 17 }, { "t", 18 }, { "gbr", 19 }, { "mach", 20 }, + { "macl", 21 }, { "fpul", 23 } + }; + + for (i = 0; i < ARRAY_SIZE (regnames); ++i) + if (strcmp (regnames[i].name, regname) == 0) + return regnames[i].dw2regnum; + + if (regname[0] == 'r') + { + p = regname + 1; + regnum = strtoul (p, &q, 10); + if (p == q || *q || regnum >= 16) + return -1; + } + else if (regname[0] == 'f' && regname[1] == 'r') + { + p = regname + 2; + regnum = strtoul (p, &q, 10); + if (p == q || *q || regnum >= 16) + return -1; + regnum += 25; + } + else if (regname[0] == 'x' && regname[1] == 'd') + { + p = regname + 2; + regnum = strtoul (p, &q, 10); + if (p == q || *q || regnum >= 8) + return -1; + regnum += 87; + } + return regnum; +} +#endif /* OBJ_ELF */