X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=gas%2Fconfig%2Ftc-xtensa.c;h=ca261ae19c4cc8f70060ee70db5572b81a2b40b2;hb=b19ea8d28b1c06c2973738c1cda076f895ac3ad0;hp=a8cfd2be7e1c56e37885345d66b79ee6b09a9da2;hpb=a7284bf13bdcfe71ea43951b352dbc6ec2d6117f;p=deliverable%2Fbinutils-gdb.git diff --git a/gas/config/tc-xtensa.c b/gas/config/tc-xtensa.c index a8cfd2be7e..ca261ae19c 100644 --- a/gas/config/tc-xtensa.c +++ b/gas/config/tc-xtensa.c @@ -1,11 +1,11 @@ /* tc-xtensa.c -- Assemble Xtensa instructions. - Copyright 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + Copyright (C) 2003-2016 Free Software Foundation, Inc. This file is part of GAS, the GNU Assembler. GAS is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2, or (at your option) + the Free Software Foundation; either version 3, or (at your option) any later version. GAS is distributed in the hope that it will be useful, @@ -18,17 +18,18 @@ the Free Software Foundation, 51 Franklin Street - Fifth Floor, Boston, MA 02110-1301, USA. */ -#include #include "as.h" +#include #include "sb.h" #include "safe-ctype.h" #include "tc-xtensa.h" #include "subsegs.h" #include "xtensa-relax.h" -#include "xtensa-istack.h" #include "dwarf2dbg.h" +#include "xtensa-istack.h" #include "struc-symbol.h" #include "xtensa-config.h" +#include "elf/xtensa.h" /* Provide default values for new configuration settings. */ #ifndef XSHAL_ABI @@ -74,11 +75,9 @@ const char FLT_CHARS[] = "rRsSfFdDxXpP"; bfd_boolean density_supported = XCHAL_HAVE_DENSITY; bfd_boolean absolute_literals_supported = XSHAL_USE_ABSOLUTE_LITERALS; -/* Maximum width we would pad an unreachable frag to get alignment. */ -#define UNREACHABLE_MAX_WIDTH 8 - static vliw_insn cur_vinsn; +unsigned xtensa_num_pipe_stages; unsigned xtensa_fetch_width = XCHAL_INST_FETCH_WIDTH; static enum debug_info_type xt_saved_debug_type = DEBUG_NONE; @@ -187,7 +186,9 @@ int generating_literals = 0; /* Instruction only properties about code. */ #define XTENSA_PROP_INSN_NO_DENSITY 0x00000040 #define XTENSA_PROP_INSN_NO_REORDER 0x00000080 -#define XTENSA_PROP_INSN_NO_TRANSFORM 0x00000100 +/* Historically, NO_TRANSFORM was a property of instructions, + but it should apply to literals under certain circumstances. */ +#define XTENSA_PROP_NO_TRANSFORM 0x00000100 /* Branch target alignment information. This transmits information to the linker optimization about the priority of aligning a @@ -213,8 +214,6 @@ int generating_literals = 0; /* Required branch target alignment. */ #define XTENSA_PROP_BT_ALIGN_REQUIRE 0x3 -#define GET_XTENSA_PROP_BT_ALIGN(flag) \ - (((unsigned) ((flag) & (XTENSA_PROP_BT_ALIGN_MASK))) >> 9) #define SET_XTENSA_PROP_BT_ALIGN(flag, align) \ (((flag) & (~XTENSA_PROP_BT_ALIGN_MASK)) | \ (((align) << 9) & XTENSA_PROP_BT_ALIGN_MASK)) @@ -235,8 +234,6 @@ int generating_literals = 0; #define XTENSA_PROP_ALIGNMENT_MASK 0x0001f000 -#define GET_XTENSA_PROP_ALIGNMENT(flag) \ - (((unsigned) ((flag) & (XTENSA_PROP_ALIGNMENT_MASK))) >> 12) #define SET_XTENSA_PROP_ALIGNMENT(flag, align) \ (((flag) & (~XTENSA_PROP_ALIGNMENT_MASK)) | \ (((align) << 12) & XTENSA_PROP_ALIGNMENT_MASK)) @@ -263,6 +260,9 @@ struct frag_flags_struct unsigned is_data : 1; unsigned is_unreachable : 1; + /* is_specific_opcode implies no_transform. */ + unsigned is_no_transform : 1; + struct { unsigned is_loop_target : 1; @@ -271,8 +271,6 @@ struct frag_flags_struct unsigned is_no_density : 1; /* no_longcalls flag does not need to be placed in the object file. */ - /* is_specific_opcode implies no_transform. */ - unsigned is_no_transform : 1; unsigned is_no_reorder : 1; @@ -351,6 +349,35 @@ op_placement_info_table op_placement_table; #define O_pltrel O_md1 /* like O_symbol but use a PLT reloc */ #define O_hi16 O_md2 /* use high 16 bits of symbolic value */ #define O_lo16 O_md3 /* use low 16 bits of symbolic value */ +#define O_pcrel O_md4 /* value is a PC-relative offset */ +#define O_tlsfunc O_md5 /* TLS_FUNC/TLSDESC_FN relocation */ +#define O_tlsarg O_md6 /* TLS_ARG/TLSDESC_ARG relocation */ +#define O_tlscall O_md7 /* TLS_CALL relocation */ +#define O_tpoff O_md8 /* TPOFF relocation */ +#define O_dtpoff O_md9 /* DTPOFF relocation */ + +struct suffix_reloc_map +{ + const char *suffix; + int length; + bfd_reloc_code_real_type reloc; + operatorT operator; +}; + +#define SUFFIX_MAP(str, reloc, op) { str, sizeof (str) - 1, reloc, op } + +static struct suffix_reloc_map suffix_relocs[] = +{ + SUFFIX_MAP ("l", BFD_RELOC_LO16, O_lo16), + SUFFIX_MAP ("h", BFD_RELOC_HI16, O_hi16), + SUFFIX_MAP ("plt", BFD_RELOC_XTENSA_PLT, O_pltrel), + SUFFIX_MAP ("pcrel", BFD_RELOC_32_PCREL, O_pcrel), + SUFFIX_MAP ("tlsfunc", BFD_RELOC_XTENSA_TLS_FUNC, O_tlsfunc), + SUFFIX_MAP ("tlsarg", BFD_RELOC_XTENSA_TLS_ARG, O_tlsarg), + SUFFIX_MAP ("tlscall", BFD_RELOC_XTENSA_TLS_CALL, O_tlscall), + SUFFIX_MAP ("tpoff", BFD_RELOC_XTENSA_TLS_TPOFF, O_tpoff), + SUFFIX_MAP ("dtpoff", BFD_RELOC_XTENSA_TLS_DTPOFF, O_dtpoff), +}; /* Directives. */ @@ -409,6 +436,29 @@ bfd_boolean directive_state[] = #endif }; +/* A circular list of all potential and actual literal pool locations + in a segment. */ +struct litpool_frag +{ + struct litpool_frag *next; + struct litpool_frag *prev; + fragS *fragP; + addressT addr; + short priority; /* 1, 2, or 3 -- 1 is highest */ + short original_priority; +}; + +/* Map a segment to its litpool_frag list. */ +struct litpool_seg +{ + struct litpool_seg *next; + asection *seg; + struct litpool_frag frag_list; + int frag_count; /* since last litpool location */ +}; + +static struct litpool_seg litpool_seg_list; + /* Directive functions. */ @@ -419,6 +469,7 @@ static void xtensa_literal_position (int); static void xtensa_literal_pseudo (int); static void xtensa_frequency_pseudo (int); static void xtensa_elf_cons (int); +static void xtensa_leb128 (int); /* Parsing and Idiom Translation. */ @@ -436,6 +487,15 @@ static void xtensa_set_frag_assembly_state (fragS *); static void finish_vinsn (vliw_insn *); static bfd_boolean emit_single_op (TInsn *); static int total_frag_text_expansion (fragS *); +static bfd_boolean use_trampolines = TRUE; +static void xtensa_check_frag_count (void); +static void xtensa_create_trampoline_frag (bfd_boolean); +static void xtensa_maybe_create_trampoline_frag (void); +struct trampoline_frag; +static int init_trampoline_frag (struct trampoline_frag *); +static void xtensa_maybe_create_literal_pool_frag (bfd_boolean, bfd_boolean); +static bfd_boolean auto_litpools = FALSE; +static int auto_litpool_limit = 10000; /* Alignment Functions. */ @@ -465,10 +525,6 @@ static void xtensa_switch_section_emit_state (emit_state *, segT, subsegT); static void xtensa_restore_emit_state (emit_state *); static segT cache_literal_section (bfd_boolean); -/* Import from elf32-xtensa.c in BFD library. */ - -extern asection *xtensa_get_property_section (asection *, const char *); - /* op_placement_info functions. */ static void init_op_placement_info_table (void); @@ -488,10 +544,12 @@ static void tinsn_from_chars (TInsn *, char *, int); static void tinsn_immed_from_frag (TInsn *, fragS *, int); static int get_num_stack_text_bytes (IStack *); static int get_num_stack_literal_bytes (IStack *); +static bfd_boolean tinsn_to_slotbuf (xtensa_format, int, TInsn *, xtensa_insnbuf); /* vliw_insn functions. */ static void xg_init_vinsn (vliw_insn *); +static void xg_copy_vinsn (vliw_insn *, vliw_insn *); static void xg_clear_vinsn (vliw_insn *); static bfd_boolean vinsn_has_specific_opcodes (vliw_insn *); static void xg_free_vinsn (vliw_insn *); @@ -532,9 +590,11 @@ static xtensa_opcode xtensa_callx8_opcode; static xtensa_opcode xtensa_callx12_opcode; static xtensa_opcode xtensa_const16_opcode; static xtensa_opcode xtensa_entry_opcode; +static xtensa_opcode xtensa_extui_opcode; static xtensa_opcode xtensa_movi_opcode; static xtensa_opcode xtensa_movi_n_opcode; static xtensa_opcode xtensa_isync_opcode; +static xtensa_opcode xtensa_j_opcode; static xtensa_opcode xtensa_jx_opcode; static xtensa_opcode xtensa_l32r_opcode; static xtensa_opcode xtensa_loop_opcode; @@ -549,11 +609,13 @@ static xtensa_opcode xtensa_retw_opcode; static xtensa_opcode xtensa_retw_n_opcode; static xtensa_opcode xtensa_rsr_lcount_opcode; static xtensa_opcode xtensa_waiti_opcode; +static int config_max_slots = 0; /* Command-line Options. */ bfd_boolean use_literal_section = TRUE; +enum flix_level produce_flix = FLIX_ALL; static bfd_boolean align_targets = TRUE; static bfd_boolean warn_unaligned_branch_targets = FALSE; static bfd_boolean has_a0_b_retw = FALSE; @@ -598,6 +660,10 @@ enum option_density = OPTION_MD_BASE, option_no_density, + option_flix, + option_no_generate_flix, + option_no_flix, + option_relax, option_no_relax, @@ -646,7 +712,14 @@ enum option_prefer_l32r, option_prefer_const16, - option_target_hardware + option_target_hardware, + + option_trampolines, + option_no_trampolines, + + option_auto_litpools, + option_no_auto_litpools, + option_auto_litpool_limit, }; const char *md_shortopts = ""; @@ -656,6 +729,10 @@ struct option md_longopts[] = { "density", no_argument, NULL, option_density }, { "no-density", no_argument, NULL, option_no_density }, + { "flix", no_argument, NULL, option_flix }, + { "no-generate-flix", no_argument, NULL, option_no_generate_flix }, + { "no-allow-flix", no_argument, NULL, option_no_flix }, + /* Both "relax" and "generics" are deprecated and treated as equivalent to the "transform" option. */ { "relax", no_argument, NULL, option_relax }, @@ -715,6 +792,13 @@ struct option md_longopts[] = { "target-hardware", required_argument, NULL, option_target_hardware }, + { "trampolines", no_argument, NULL, option_trampolines }, + { "no-trampolines", no_argument, NULL, option_no_trampolines }, + + { "auto-litpools", no_argument, NULL, option_auto_litpools }, + { "no-auto-litpools", no_argument, NULL, option_no_auto_litpools }, + { "auto-litpool-limit", required_argument, NULL, option_auto_litpool_limit }, + { NULL, no_argument, NULL, 0 } }; @@ -722,7 +806,7 @@ size_t md_longopts_size = sizeof md_longopts; int -md_parse_option (int c, char *arg) +md_parse_option (int c, const char *arg) { switch (c) { @@ -738,6 +822,15 @@ md_parse_option (int c, char *arg) case option_no_link_relax: linkrelax = 0; return 1; + case option_flix: + produce_flix = FLIX_ALL; + return 1; + case option_no_generate_flix: + produce_flix = FLIX_NO_GENERATE; + return 1; + case option_no_flix: + produce_flix = FLIX_NONE; + return 1; case option_generics: as_warn (_("--generics is deprecated; use --transform instead")); return md_parse_option (option_transform, arg); @@ -851,20 +944,21 @@ md_parse_option (int c, char *arg) case option_target_hardware: { int earliest, latest = 0; + char *end; if (*arg == 0 || *arg == '-') as_fatal (_("invalid target hardware version")); - earliest = strtol (arg, &arg, 0); + earliest = strtol (arg, &end, 0); - if (*arg == 0) + if (*end == 0) latest = earliest; - else if (*arg == '-') + else if (*end == '-') { - if (*++arg == 0) + if (*++end == 0) as_fatal (_("invalid target hardware version")); - latest = strtol (arg, &arg, 0); + latest = strtol (end, &end, 0); } - if (*arg != 0) + if (*end != 0) as_fatal (_("invalid target hardware version")); xtensa_setup_hw_workarounds (earliest, latest); @@ -886,6 +980,43 @@ md_parse_option (int c, char *arg) directive_state[directive_transform] = FALSE; return 1; + case option_trampolines: + use_trampolines = TRUE; + return 1; + + case option_no_trampolines: + use_trampolines = FALSE; + return 1; + + case option_auto_litpools: + auto_litpools = TRUE; + use_literal_section = FALSE; + return 1; + + case option_no_auto_litpools: + auto_litpools = FALSE; + auto_litpool_limit = -1; + return 1; + + case option_auto_litpool_limit: + { + int value = 0; + char *end; + if (auto_litpool_limit < 0) + as_fatal (_("no-auto-litpools is incompatible with auto-litpool-limit")); + if (*arg == 0 || *arg == '-') + as_fatal (_("invalid auto-litpool-limit argument")); + value = strtol (arg, &end, 10); + if (*end != 0) + as_fatal (_("invalid auto-litpool-limit argument")); + if (value < 100 || value > 10000) + as_fatal (_("invalid auto-litpool-limit argument (range is 100-10000)")); + auto_litpool_limit = value; + auto_litpools = TRUE; + use_literal_section = FALSE; + return 1; + } + default: return 0; } @@ -904,7 +1035,19 @@ Xtensa options:\n\ --[no-]target-align [Do not] try to align branch targets\n\ --[no-]longcalls [Do not] emit 32-bit call sequences\n\ --[no-]transform [Do not] transform instructions\n\ - --rename-section old=new Rename section 'old' to 'new'\n", stream); + --flix both allow hand-written and generate flix bundles\n\ + --no-generate-flix allow hand-written but do not generate\n\ + flix bundles\n\ + --no-allow-flix neither allow hand-written nor generate\n\ + flix bundles\n\ + --rename-section old=new Rename section 'old' to 'new'\n\ + --[no-]trampolines [Do not] generate trampolines (jumps to jumps)\n\ + when jumps do not reach their targets\n\ + --[no-]auto-litpools [Do not] automatically create literal pools\n\ + --auto-litpool-limit=\n\ + (range 100-10000) Maximum number of blocks of\n\ + instructions to emit between literal pool\n\ + locations; implies --auto-litpools flag\n", stream); } @@ -916,7 +1059,7 @@ xtensa_add_insn_label (symbolS *sym) sym_list *l; if (!free_insn_labels) - l = (sym_list *) xmalloc (sizeof (sym_list)); + l = XNEW (sym_list); else { l = free_insn_labels; @@ -941,43 +1084,16 @@ xtensa_clear_insn_labels (void) } -/* The "loops_ok" argument is provided to allow ignoring labels that - define loop ends. This fixes a bug where the NOPs to align a - loop opcode were included in a previous zero-cost loop: - - loop a0, loopend - - loopend: - - loop a2, loopend2 - - - would become: - - loop a0, loopend - - nop.n <===== bad! - loopend: - - loop a2, loopend2 - - - This argument is used to prevent moving the NOP to before the - loop-end label, which is what you want in this special case. */ - static void -xtensa_move_labels (fragS *new_frag, valueT new_offset, bfd_boolean loops_ok) +xtensa_move_labels (fragS *new_frag, valueT new_offset) { sym_list *lit; for (lit = insn_labels; lit; lit = lit->next) { symbolS *lit_sym = lit->sym; - if (loops_ok || ! symbol_get_tc (lit_sym)->is_loop_target) - { - S_SET_VALUE (lit_sym, new_offset); - symbol_set_frag (lit_sym, new_frag); - } + S_SET_VALUE (lit_sym, new_offset); + symbol_set_frag (lit_sym, new_frag); } } @@ -1004,7 +1120,11 @@ const pseudo_typeS md_pseudo_table[] = { "frame", s_ignore, 0 }, /* Formerly used for STABS debugging. */ { "long", xtensa_elf_cons, 4 }, { "word", xtensa_elf_cons, 4 }, + { "4byte", xtensa_elf_cons, 4 }, { "short", xtensa_elf_cons, 2 }, + { "2byte", xtensa_elf_cons, 2 }, + { "sleb128", xtensa_leb128, 1}, + { "uleb128", xtensa_leb128, 0}, { "begin", xtensa_begin_directive, 0 }, { "end", xtensa_end_directive, 0 }, { "literal", xtensa_literal_pseudo, 0 }, @@ -1018,7 +1138,7 @@ use_transform (void) { /* After md_end, you should be checking frag by frag, rather than state directives. */ - assert (!past_xtensa_end); + gas_assert (!past_xtensa_end); return directive_state[directive_transform]; } @@ -1029,7 +1149,7 @@ do_align_targets (void) /* Do not use this function after md_end; just look at align_targets instead. There is no target-align directive, so alignment is either enabled for all frags or not done at all. */ - assert (!past_xtensa_end); + gas_assert (!past_xtensa_end); return align_targets && use_transform (); } @@ -1037,11 +1157,11 @@ do_align_targets (void) static void directive_push (directiveE directive, bfd_boolean negated, const void *datum) { - char *file; + const char *file; unsigned int line; - state_stackS *stack = (state_stackS *) xmalloc (sizeof (state_stackS)); + state_stackS *stack = XNEW (state_stackS); - as_where (&file, &line); + file = as_where (&line); stack->directive = directive; stack->negated = negated; @@ -1118,7 +1238,7 @@ get_directive (directiveE *directive, bfd_boolean *negated) { int len; unsigned i; - char *directive_string; + const char *directive_string; if (strncmp (input_line_pointer, "no-", 3) != 0) *negated = FALSE; @@ -1195,7 +1315,7 @@ xtensa_begin_directive (int ignore ATTRIBUTE_UNUSED) insn_labels = NULL; } as_warn (_(".begin literal is deprecated; use .literal instead")); - state = (emit_state *) xmalloc (sizeof (emit_state)); + state = XNEW (emit_state); xtensa_switch_to_literal_fragment (state); directive_push (directive_literal, negated, state); break; @@ -1214,8 +1334,8 @@ xtensa_begin_directive (int ignore ATTRIBUTE_UNUSED) /* Allocate the literal state for this section and push onto the directive stack. */ - ls = xmalloc (sizeof (lit_state)); - assert (ls); + ls = XNEW (lit_state); + gas_assert (ls); *ls = default_lit_sections; directive_push (directive_literal_prefix, negated, ls); @@ -1284,18 +1404,18 @@ xtensa_end_directive (int ignore ATTRIBUTE_UNUSED) md_flush_pending_output (); - switch (end_directive) + switch ((int) end_directive) { - case (directiveE) XTENSA_UNDEFINED: + case XTENSA_UNDEFINED: discard_rest_of_line (); return; - case directive_density: + case (int) directive_density: as_warn (_(".end [no-]density is ignored")); demand_empty_rest_of_line (); break; - case directive_absolute_literals: + case (int) directive_absolute_literals: if (!absolute_literals_supported && !end_negated) { as_warn (_("Xtensa absolute literals option not supported; ignored")); @@ -1340,7 +1460,7 @@ xtensa_end_directive (int ignore ATTRIBUTE_UNUSED) case directive_literal_prefix: /* Restore the default collection sections from saved state. */ s = (lit_state *) state; - assert (s); + gas_assert (s); default_lit_sections = *s; /* Free the state storage. */ @@ -1415,15 +1535,18 @@ xtensa_literal_pseudo (int ignored ATTRIBUTE_UNUSED) if (use_literal_section || directive_state[directive_absolute_literals]) dest_seg = now_seg; + /* FIXME, despite the previous comments, dest_seg is unused... */ + (void) dest_seg; + /* All literals are aligned to four-byte boundaries. */ frag_align (2, 0, 0); record_alignment (now_seg, 2); - c = get_symbol_end (); + c = get_symbol_name (&base_name); /* Just after name is now '\0'. */ p = input_line_pointer; *p = c; - SKIP_WHITESPACE (); + SKIP_WHITESPACE_AFTER_NAME (); if (*input_line_pointer != ',' && *input_line_pointer != ':') { @@ -1433,11 +1556,11 @@ xtensa_literal_pseudo (int ignored ATTRIBUTE_UNUSED) xtensa_restore_emit_state (&state); return; } - *p = 0; + *p = 0; colon (base_name); - *p = c; + input_line_pointer++; /* skip ',' or ':' */ xtensa_elf_cons (4); @@ -1463,10 +1586,7 @@ xtensa_literal_prefix (void) "abcdefghijklmnopqrstuvwxyz_/0123456789.$"); /* Get a null-terminated copy of the name. */ - name = xmalloc (len + 1); - assert (name); - strncpy (name, input_line_pointer, len); - name[len] = 0; + name = xmemdup0 (input_line_pointer, len); /* Skip the name in the input line. */ input_line_pointer += len; @@ -1550,16 +1670,23 @@ xtensa_elf_cons (int nbytes) else if (nbytes != (int) bfd_get_reloc_size (reloc_howto)) as_bad (_("%s relocations do not fit in %d bytes"), reloc_howto->name, nbytes); + else if (reloc == BFD_RELOC_XTENSA_TLS_FUNC + || reloc == BFD_RELOC_XTENSA_TLS_ARG + || reloc == BFD_RELOC_XTENSA_TLS_CALL) + as_bad (_("invalid use of %s relocation"), reloc_howto->name); else { char *p = frag_more ((int) nbytes); xtensa_set_frag_assembly_state (frag_now); fix_new_exp (frag_now, p - frag_now->fr_literal, - nbytes, &exp, 0, reloc); + nbytes, &exp, reloc_howto->pc_relative, reloc); } } else - emit_expr (&exp, (unsigned int) nbytes); + { + xtensa_set_frag_assembly_state (frag_now); + emit_expr (&exp, (unsigned int) nbytes); + } } while (*input_line_pointer++ == ','); @@ -1567,6 +1694,16 @@ xtensa_elf_cons (int nbytes) demand_empty_rest_of_line (); } +static bfd_boolean is_leb128_expr; + +static void +xtensa_leb128 (int sign) +{ + is_leb128_expr = TRUE; + s_leb128 (sign); + is_leb128_expr = FALSE; +} + /* Parsing and Idiom Translation. */ @@ -1574,29 +1711,12 @@ xtensa_elf_cons (int nbytes) static bfd_reloc_code_real_type xtensa_elf_suffix (char **str_p, expressionS *exp_p) { - struct map_bfd - { - char *string; - int length; - bfd_reloc_code_real_type reloc; - }; - char ident[20]; char *str = *str_p; char *str2; int ch; int len; - struct map_bfd *ptr; - -#define MAP(str,reloc) { str, sizeof (str) - 1, reloc } - - static struct map_bfd mapping[] = - { - MAP ("l", BFD_RELOC_LO16), - MAP ("h", BFD_RELOC_HI16), - MAP ("plt", BFD_RELOC_XTENSA_PLT), - { (char *) 0, 0, BFD_RELOC_UNUSED } - }; + unsigned int i; if (*str++ != '@') return BFD_RELOC_NONE; @@ -1613,10 +1733,10 @@ xtensa_elf_suffix (char **str_p, expressionS *exp_p) len = str2 - ident; ch = ident[0]; - for (ptr = &mapping[0]; ptr->length > 0; ptr++) - if (ch == ptr->string[0] - && len == ptr->length - && memcmp (ident, ptr->string, ptr->length) == 0) + for (i = 0; i < ARRAY_SIZE (suffix_relocs); i++) + if (ch == suffix_relocs[i].suffix[0] + && len == suffix_relocs[i].length + && memcmp (ident, suffix_relocs[i].suffix, suffix_relocs[i].length) == 0) { /* Now check for "identifier@suffix+constant". */ if (*str == '-' || *str == '+') @@ -1637,13 +1757,64 @@ xtensa_elf_suffix (char **str_p, expressionS *exp_p) } *str_p = str; - return ptr->reloc; + return suffix_relocs[i].reloc; } return BFD_RELOC_UNUSED; } +/* Find the matching operator type. */ +static operatorT +map_suffix_reloc_to_operator (bfd_reloc_code_real_type reloc) +{ + operatorT operator = O_illegal; + unsigned int i; + + for (i = 0; i < ARRAY_SIZE (suffix_relocs); i++) + { + if (suffix_relocs[i].reloc == reloc) + { + operator = suffix_relocs[i].operator; + break; + } + } + gas_assert (operator != O_illegal); + return operator; +} + + +/* Find the matching reloc type. */ +static bfd_reloc_code_real_type +map_operator_to_reloc (unsigned char operator, bfd_boolean is_literal) +{ + unsigned int i; + bfd_reloc_code_real_type reloc = BFD_RELOC_UNUSED; + + for (i = 0; i < ARRAY_SIZE (suffix_relocs); i++) + { + if (suffix_relocs[i].operator == operator) + { + reloc = suffix_relocs[i].reloc; + break; + } + } + + if (is_literal) + { + if (reloc == BFD_RELOC_XTENSA_TLS_FUNC) + return BFD_RELOC_XTENSA_TLSDESC_FN; + else if (reloc == BFD_RELOC_XTENSA_TLS_ARG) + return BFD_RELOC_XTENSA_TLSDESC_ARG; + } + + if (reloc == BFD_RELOC_UNUSED) + return BFD_RELOC_32; + + return reloc; +} + + static const char * expression_end (const char *name) { @@ -1735,43 +1906,45 @@ expression_maybe_register (xtensa_opcode opc, int opnd, expressionS *tok) { bfd_reloc_code_real_type reloc; segT t = expression (tok); + if (t == absolute_section && xtensa_operand_is_PCrelative (isa, opc, opnd) == 1) { - assert (tok->X_op == O_constant); + gas_assert (tok->X_op == O_constant); tok->X_op = O_symbol; tok->X_add_symbol = &abs_symbol; } if ((tok->X_op == O_constant || tok->X_op == O_symbol) - && (reloc = xtensa_elf_suffix (&input_line_pointer, tok)) - && (reloc != BFD_RELOC_NONE)) + && ((reloc = xtensa_elf_suffix (&input_line_pointer, tok)) + != BFD_RELOC_NONE)) { switch (reloc) { - default: - case BFD_RELOC_UNUSED: - as_bad (_("unsupported relocation")); - break; - - case BFD_RELOC_XTENSA_PLT: - tok->X_op = O_pltrel; - break; - - case BFD_RELOC_LO16: - if (tok->X_op == O_constant) + case BFD_RELOC_LO16: + if (tok->X_op == O_constant) + { tok->X_add_number &= 0xffff; - else - tok->X_op = O_lo16; - break; - - case BFD_RELOC_HI16: - if (tok->X_op == O_constant) + return; + } + break; + case BFD_RELOC_HI16: + if (tok->X_op == O_constant) + { tok->X_add_number = ((unsigned) tok->X_add_number) >> 16; - else - tok->X_op = O_hi16; - break; + return; + } + break; + case BFD_RELOC_UNUSED: + as_bad (_("unsupported relocation")); + return; + case BFD_RELOC_32_PCREL: + as_bad (_("pcrel relocation not allowed in an instruction")); + return; + default: + break; } + tok->X_op = map_suffix_reloc_to_operator (reloc); } } else @@ -1842,7 +2015,7 @@ tokenize_arguments (char **args, char *str) arg_end += 1; arg_len = arg_end - input_line_pointer; - arg = (char *) xmalloc ((saw_colon ? 1 : 0) + arg_len + 1); + arg = XNEWVEC (char, (saw_colon ? 1 : 0) + arg_len + 1); args[num_args] = arg; if (saw_colon) @@ -1925,7 +2098,7 @@ parse_arguments (TInsn *insn, int num_args, char **arg_strings) input_line_pointer++; if (num_regs == 0) goto err; - assert (opnd_cnt > 0); + gas_assert (opnd_cnt > 0); num_regs--; opnd_rf = xtensa_operand_regfile (isa, opcode, last_opnd_cnt); if (next_reg @@ -1940,7 +2113,7 @@ parse_arguments (TInsn *insn, int num_args, char **arg_strings) as_warn (_("too many arguments")); goto err; } - assert (opnd_cnt < MAX_INSN_ARGS); + gas_assert (opnd_cnt < MAX_INSN_ARGS); expression_maybe_register (opcode, opnd_cnt, tok); next_reg = tok->X_add_number + 1; @@ -1957,6 +2130,7 @@ parse_arguments (TInsn *insn, int num_args, char **arg_strings) last_tok = tok; last_opnd_cnt = opnd_cnt; + demand_empty_rest_of_line (); do { @@ -2054,8 +2228,7 @@ xg_reverse_shift_count (char **cnt_argp) cnt_arg = *cnt_argp; /* replace the argument with "31-(argument)" */ - new_arg = (char *) xmalloc (strlen (cnt_arg) + 6); - sprintf (new_arg, "31-(%s)", cnt_arg); + new_arg = concat ("31-(", cnt_arg, ")", (char *) NULL); free (cnt_arg); *cnt_argp = new_arg; @@ -2086,11 +2259,10 @@ xg_arg_is_constant (char *arg, offsetT *valp) static void -xg_replace_opname (char **popname, char *newop) +xg_replace_opname (char **popname, const char *newop) { free (*popname); - *popname = (char *) xmalloc (strlen (newop) + 1); - strcpy (*popname, newop); + *popname = xstrdup (newop); } @@ -2185,8 +2357,7 @@ xg_translate_sysreg_op (char **popname, int *pnum_args, char **arg_strings) /* Another special case for "WSR.INTSET".... */ if (is_write && !is_user && !strcasecmp ("interrupt", sr_name)) sr_name = "intset"; - new_opname = (char *) xmalloc (strlen (sr_name) + 6); - sprintf (new_opname, "%s.%s", *popname, sr_name); + new_opname = concat (*popname, ".", sr_name, (char *) NULL); free (*popname); *popname = new_opname; @@ -2245,7 +2416,7 @@ xtensa_translate_old_userreg_ops (char **popname) /* Translate the opcode. */ sr_name = xtensa_sysreg_name (isa, sr); - new_opname = (char *) xmalloc (strlen (sr_name) + 6); + new_opname = XNEWVEC (char, strlen (sr_name) + 6); sprintf (new_opname, "%s%cur.%s", (has_underbar ? "_" : ""), opname[0], sr_name); free (*popname); @@ -2256,8 +2427,8 @@ xtensa_translate_old_userreg_ops (char **popname) static int -xtensa_translate_zero_immed (char *old_op, - char *new_op, +xtensa_translate_zero_immed (const char *old_op, + const char *new_op, char **popname, int *pnum_args, char **arg_strings) @@ -2266,7 +2437,7 @@ xtensa_translate_zero_immed (char *old_op, offsetT val; opname = *popname; - assert (opname[0] != '_'); + gas_assert (opname[0] != '_'); if (strcmp (opname, old_op) != 0) return 0; @@ -2295,9 +2466,6 @@ xg_translate_idioms (char **popname, int *pnum_args, char **arg_strings) char *opname = *popname; bfd_boolean has_underbar = FALSE; - if (cur_vinsn.inside_bundle) - return 0; - if (*opname == '_') { has_underbar = TRUE; @@ -2313,8 +2481,7 @@ xg_translate_idioms (char **popname, int *pnum_args, char **arg_strings) if (xg_check_num_args (pnum_args, 2, opname, arg_strings)) return -1; xg_replace_opname (popname, (has_underbar ? "_or" : "or")); - arg_strings[2] = (char *) xmalloc (strlen (arg_strings[1]) + 1); - strcpy (arg_strings[2], arg_strings[1]); + arg_strings[2] = xstrdup (arg_strings[1]); *pnum_args = 3; } return 0; @@ -2340,7 +2507,11 @@ xg_translate_idioms (char **popname, int *pnum_args, char **arg_strings) return 0; } - if (xtensa_nop_opcode == XTENSA_UNDEFINED + /* Don't do anything special with NOPs inside FLIX instructions. They + are handled elsewhere. Real NOP instructions are always available + in configurations with FLIX, so this should never be an issue but + check for it anyway. */ + if (!cur_vinsn.inside_bundle && xtensa_nop_opcode == XTENSA_UNDEFINED && strcmp (opname, "nop") == 0) { if (use_transform () && !has_underbar && density_supported) @@ -2350,12 +2521,9 @@ xg_translate_idioms (char **popname, int *pnum_args, char **arg_strings) if (xg_check_num_args (pnum_args, 0, opname, arg_strings)) return -1; xg_replace_opname (popname, (has_underbar ? "_or" : "or")); - arg_strings[0] = (char *) xmalloc (3); - arg_strings[1] = (char *) xmalloc (3); - arg_strings[2] = (char *) xmalloc (3); - strcpy (arg_strings[0], "a1"); - strcpy (arg_strings[1], "a1"); - strcpy (arg_strings[2], "a1"); + arg_strings[0] = xstrdup ("a1"); + arg_strings[1] = xstrdup ("a1"); + arg_strings[2] = xstrdup ("a1"); *pnum_args = 3; } return 0; @@ -2627,7 +2795,7 @@ xtensa_insnbuf_set_operand (xtensa_insnbuf slotbuf, if (xtensa_operand_is_PCrelative (xtensa_default_isa, opcode, operand) == 1) as_bad_where ((char *) file, line, - _("operand %d of '%s' has out of range value '%u'"), + _("operand %d of '%s' has out of range value '%u'"), operand + 1, xtensa_opcode_name (xtensa_default_isa, opcode), value); @@ -2664,13 +2832,10 @@ xtensa_insnbuf_get_operand (xtensa_insnbuf slotbuf, /* The routine xg_instruction_matches_option_term must return TRUE when a given option term is true. The meaning of all of the option - terms is given interpretation by this function. This is needed when - an option depends on the state of a directive, but there are no such - options in use right now. */ + terms is given interpretation by this function. */ static bfd_boolean -xg_instruction_matches_option_term (TInsn *insn ATTRIBUTE_UNUSED, - const ReqOrOption *option) +xg_instruction_matches_option_term (TInsn *insn, const ReqOrOption *option) { if (strcmp (option->option_name, "realnop") == 0 || strncmp (option->option_name, "IsaUse", 6) == 0) @@ -2679,6 +2844,8 @@ xg_instruction_matches_option_term (TInsn *insn ATTRIBUTE_UNUSED, relaxation table. There's no need to reevaluate them now. */ return TRUE; } + else if (strcmp (option->option_name, "FREEREG") == 0) + return insn->extra_arg.X_op == O_register; else { as_fatal (_("internal error: unknown option name '%s'"), @@ -2742,7 +2909,7 @@ xg_instruction_matches_rule (TInsn *insn, TransitionRule *rule) { case OP_CONSTANT: /* The expression must be the constant. */ - assert (cond->op_num < insn->ntok); + gas_assert (cond->op_num < insn->ntok); exp1 = &insn->tok[cond->op_num]; if (expr_is_const (exp1)) { @@ -2781,8 +2948,8 @@ xg_instruction_matches_rule (TInsn *insn, TransitionRule *rule) break; case OP_OPERAND: - assert (cond->op_num < insn->ntok); - assert (cond->op_data < insn->ntok); + gas_assert (cond->op_num < insn->ntok); + gas_assert (cond->op_data < insn->ntok); exp1 = &insn->tok[cond->op_num]; exp2 = &insn->tok[cond->op_data]; @@ -2884,7 +3051,7 @@ xg_instruction_match (TInsn *insn) { TransitionTable *table = xg_build_simplify_table (&transition_rule_cmp); TransitionList *l; - assert (insn->opcode < table->num_opcodes); + gas_assert (insn->opcode < table->num_opcodes); /* Walk through all of the possible transitions. */ for (l = table->table[insn->opcode]; l != NULL; l = l->next) @@ -2927,8 +3094,8 @@ xg_is_single_relaxable_insn (TInsn *insn, TInsn *targ, bfd_boolean narrow_only) TransitionList *l; TransitionRule *match = 0; - assert (insn->insn_type == ITYPE_INSN); - assert (insn->opcode < table->num_opcodes); + gas_assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->opcode < table->num_opcodes); for (l = table->table[insn->opcode]; l != NULL; l = l->next) { @@ -2962,7 +3129,7 @@ xg_get_max_insn_widen_size (xtensa_opcode opcode) TransitionList *l; int max_size = xg_get_single_size (opcode); - assert (opcode < table->num_opcodes); + gas_assert (opcode < table->num_opcodes); for (l = table->table[opcode]; l != NULL; l = l->next) { @@ -2975,7 +3142,7 @@ xg_get_max_insn_widen_size (xtensa_opcode opcode) build_list = rule->to_instr; if (is_unique_insn_expansion (rule)) { - assert (build_list->typ == INSTR_INSTR); + gas_assert (build_list->typ == INSTR_INSTR); this_size = xg_get_max_insn_widen_size (build_list->opcode); } else @@ -3008,7 +3175,7 @@ xg_get_max_insn_widen_literal_size (xtensa_opcode opcode) TransitionList *l; int max_size = 0; - assert (opcode < table->num_opcodes); + gas_assert (opcode < table->num_opcodes); for (l = table->table[opcode]; l != NULL; l = l->next) { @@ -3021,7 +3188,7 @@ xg_get_max_insn_widen_literal_size (xtensa_opcode opcode) build_list = rule->to_instr; if (is_unique_insn_expansion (rule)) { - assert (build_list->typ == INSTR_INSTR); + gas_assert (build_list->typ == INSTR_INSTR); this_size = xg_get_max_insn_widen_literal_size (build_list->opcode); } else @@ -3053,8 +3220,8 @@ xg_is_relaxable_insn (TInsn *insn, int lateral_steps) TransitionTable *table = xg_build_widen_table (&transition_rule_cmp); TransitionList *l; - assert (insn->insn_type == ITYPE_INSN); - assert (insn->opcode < table->num_opcodes); + gas_assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->opcode < table->num_opcodes); for (l = table->table[insn->opcode]; l != NULL; l = l->next) { @@ -3104,6 +3271,11 @@ xg_valid_literal_expression (const expressionS *exp) case O_uminus: case O_subtract: case O_pltrel: + case O_pcrel: + case O_tlsfunc: + case O_tlsarg: + case O_tpoff: + case O_dtpoff: return TRUE; default: return FALSE; @@ -3134,24 +3306,25 @@ xg_immeds_fit (const TInsn *insn) int i; int n = insn->ntok; - assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->insn_type == ITYPE_INSN); for (i = 0; i < n; ++i) { - const expressionS *expr = &insn->tok[i]; + const expressionS *exp = &insn->tok[i]; + if (xtensa_operand_is_register (isa, insn->opcode, i) == 1) continue; - switch (expr->X_op) + switch (exp->X_op) { case O_register: case O_constant: - if (xg_check_operand (expr->X_add_number, insn->opcode, i)) + if (xg_check_operand (exp->X_add_number, insn->opcode, i)) return FALSE; break; default: /* The symbol should have a fixup associated with it. */ - assert (FALSE); + gas_assert (FALSE); break; } } @@ -3177,19 +3350,20 @@ xg_symbolic_immeds_fit (const TInsn *insn, int i; int n = insn->ntok; - assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->insn_type == ITYPE_INSN); for (i = 0; i < n; ++i) { - const expressionS *expr = &insn->tok[i]; + const expressionS *exp = &insn->tok[i]; + if (xtensa_operand_is_register (isa, insn->opcode, i) == 1) continue; - switch (expr->X_op) + switch (exp->X_op) { case O_register: case O_constant: - if (xg_check_operand (expr->X_add_number, insn->opcode, i)) + if (xg_check_operand (exp->X_add_number, insn->opcode, i)) return FALSE; break; @@ -3207,27 +3381,29 @@ xg_symbolic_immeds_fit (const TInsn *insn, || xtensa_operand_is_PCrelative (isa, insn->opcode, i) == 0) return FALSE; - /* If it is a weak symbol, then assume it won't reach. */ - if (S_IS_WEAK (expr->X_add_symbol)) - return FALSE; - - if (is_direct_call_opcode (insn->opcode) - && ! pc_frag->tc_frag_data.use_longcalls) + /* If it is a weak symbol or a symbol in a different section, + it cannot be known to fit at assembly time. */ + if (S_IS_WEAK (exp->X_add_symbol) + || S_GET_SEGMENT (exp->X_add_symbol) != pc_seg) { - /* If callee is undefined or in a different segment, be - optimistic and assume it will be in range. */ - if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg) + /* For a direct call with --no-longcalls, be optimistic and + assume it will be in range. If the symbol is weak and + undefined, it may remain undefined at link-time, in which + case it will have a zero value and almost certainly be out + of range for a direct call; thus, relax for undefined weak + symbols even if longcalls is not enabled. */ + if (is_direct_call_opcode (insn->opcode) + && ! pc_frag->tc_frag_data.use_longcalls + && (! S_IS_WEAK (exp->X_add_symbol) + || S_IS_DEFINED (exp->X_add_symbol))) return TRUE; - } - /* Only references within a segment can be known to fit in the - operands at assembly time. */ - if (S_GET_SEGMENT (expr->X_add_symbol) != pc_seg) - return FALSE; + return FALSE; + } - symbolP = expr->X_add_symbol; + symbolP = exp->X_add_symbol; sym_frag = symbol_get_frag (symbolP); - target = S_GET_VALUE (symbolP) + expr->X_add_number; + target = S_GET_VALUE (symbolP) + exp->X_add_number; pc = pc_frag->fr_address + pc_offset; /* If frag has yet to be reached on this pass, assume it @@ -3267,8 +3443,9 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) BuildOp *op; symbolS *sym; - memset (targ, 0, sizeof (TInsn)); - targ->linenum = insn->linenum; + tinsn_init (targ); + targ->debug_line = insn->debug_line; + targ->loc_directive_seen = insn->loc_directive_seen; switch (bi->typ) { case INSTR_INSTR: @@ -3282,7 +3459,7 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) int op_num = op->op_num; int op_data = op->op_data; - assert (op->op_num < MAX_INSN_ARGS); + gas_assert (op->op_num < MAX_INSN_ARGS); if (targ->ntok <= op_num) targ->ntok = op_num + 1; @@ -3293,12 +3470,20 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) set_expr_const (&targ->tok[op_num], op_data); break; case OP_OPERAND: - assert (op_data < insn->ntok); + gas_assert (op_data < insn->ntok); copy_expr (&targ->tok[op_num], &insn->tok[op_data]); break; + case OP_FREEREG: + if (insn->extra_arg.X_op != O_register) + return FALSE; + copy_expr (&targ->tok[op_num], &insn->extra_arg); + break; case OP_LITERAL: sym = get_special_literal_symbol (); set_expr_symbol_offset (&targ->tok[op_num], sym, 0); + if (insn->tok[op_data].X_op == O_tlsfunc + || insn->tok[op_data].X_op == O_tlsarg) + copy_expr (&targ->extra_arg, &insn->tok[op_data]); break; case OP_LABEL: sym = get_special_label_symbol (); @@ -3306,7 +3491,7 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) break; case OP_OPERAND_HI16U: case OP_OPERAND_LOW16U: - assert (op_data < insn->ntok); + gas_assert (op_data < insn->ntok); if (expr_is_const (&insn->tok[op_data])) { long val; @@ -3322,7 +3507,7 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) if (targ->opcode == XTENSA_UNDEFINED || (targ->opcode != xtensa_const16_opcode)) return FALSE; - assert (op_data < insn->ntok); + gas_assert (op_data < insn->ntok); /* Need to build a O_lo16 or O_hi16. */ copy_expr (&targ->tok[op_num], &insn->tok[op_data]); if (targ->tok[op_num].X_op == O_symbol) @@ -3343,7 +3528,7 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) OP_OPERAND_F32MINUS */ if (xg_has_userdef_op_fn (op->typ)) { - assert (op_data < insn->ntok); + gas_assert (op_data < insn->ntok); if (expr_is_const (&insn->tok[op_data])) { long val; @@ -3357,7 +3542,7 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) return FALSE; /* We cannot use a relocation for this. */ break; } - assert (0); + gas_assert (0); break; } } @@ -3372,7 +3557,7 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) { int op_num = op->op_num; int op_data = op->op_data; - assert (op->op_num < MAX_INSN_ARGS); + gas_assert (op->op_num < MAX_INSN_ARGS); if (targ->ntok <= op_num) targ->ntok = op_num + 1; @@ -3380,7 +3565,7 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) switch (op->typ) { case OP_OPERAND: - assert (op_data < insn->ntok); + gas_assert (op_data < insn->ntok); /* We can only pass resolvable literals through. */ if (!xg_valid_literal_expression (&insn->tok[op_data])) return FALSE; @@ -3390,7 +3575,7 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) case OP_CONSTANT: case OP_LABEL: default: - assert (0); + gas_assert (0); break; } } @@ -3402,11 +3587,11 @@ xg_build_to_insn (TInsn *targ, TInsn *insn, BuildInstr *bi) targ->insn_type = ITYPE_LABEL; targ->is_specific_opcode = FALSE; /* Literal with no ops is a label? */ - assert (op == NULL); + gas_assert (op == NULL); break; default: - assert (0); + gas_assert (0); } return TRUE; @@ -3439,8 +3624,8 @@ xg_expand_to_stack (IStack *istack, TInsn *insn, int lateral_steps) TransitionTable *table = xg_build_widen_table (&transition_rule_cmp); TransitionList *l; - assert (insn->insn_type == ITYPE_INSN); - assert (insn->opcode < table->num_opcodes); + gas_assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->opcode < table->num_opcodes); for (l = table->table[insn->opcode]; l != NULL; l = l->next) { @@ -3459,11 +3644,11 @@ xg_expand_to_stack (IStack *istack, TInsn *insn, int lateral_steps) /* Check to see if it fits. */ for (i = stack_size; i < istack->ninsn; i++) { - TInsn *insn = &istack->insn[i]; + TInsn *tinsn = &istack->insn[i]; - if (insn->insn_type == ITYPE_INSN - && !tinsn_has_symbolic_operands (insn) - && !xg_immeds_fit (insn)) + if (tinsn->insn_type == ITYPE_INSN + && !tinsn_has_symbolic_operands (tinsn) + && !xg_immeds_fit (tinsn)) { istack->ninsn = stack_size; return FALSE; @@ -3479,7 +3664,33 @@ xg_expand_to_stack (IStack *istack, TInsn *insn, int lateral_steps) /* Relax the assembly instruction at least "min_steps". - Return the number of steps taken. */ + Return the number of steps taken. + + For relaxation to correctly terminate, every relaxation chain must + terminate in one of two ways: + + 1. If the chain from one instruction to the next consists entirely of + single instructions, then the chain *must* handle all possible + immediates without failing. It must not ever fail because an + immediate is out of range. The MOVI.N -> MOVI -> L32R relaxation + chain is one example. L32R loads 32 bits, and there cannot be an + immediate larger than 32 bits, so it satisfies this condition. + Single instruction relaxation chains are as defined by + xg_is_single_relaxable_instruction. + + 2. Otherwise, the chain must end in a multi-instruction expansion: e.g., + BNEZ.N -> BNEZ -> BNEZ.W15 -> BENZ.N/J + + Strictly speaking, in most cases you can violate condition 1 and be OK + -- in particular when the last two instructions have the same single + size. But nevertheless, you should guarantee the above two conditions. + + We could fix this so that single-instruction expansions correctly + terminate when they can't handle the range, but the error messages are + worse, and it actually turns out that in every case but one (18-bit wide + branches), you need a multi-instruction expansion to get the full range + anyway. And because 18-bit branches are handled identically to 15-bit + branches, there isn't any point in changing it. */ static int xg_assembly_relax (IStack *istack, @@ -3492,12 +3703,9 @@ xg_assembly_relax (IStack *istack, { int steps_taken = 0; - /* assert (has no symbolic operands) - Some of its immeds don't fit. - Try to build a relaxed version. - This may go through a couple of stages - of single instruction transformations before - we get there. */ + /* Some of its immeds don't fit. Try to build a relaxed version. + This may go through a couple of stages of single instruction + transformations before we get there. */ TInsn single_target; TInsn current_insn; @@ -3556,16 +3764,6 @@ xg_assembly_relax (IStack *istack, } -static void -xg_force_frag_space (int size) -{ - /* This may have the side effect of creating a new fragment for the - space to go into. I just do not like the name of the "frag" - functions. */ - frag_grow (size); -} - - static void xg_finish_frag (char *last_insn, enum xtensa_relax_statesE frag_state, @@ -3580,8 +3778,7 @@ xg_finish_frag (char *last_insn, fragS *old_frag; - xg_force_frag_space (max_growth); - + frag_grow (max_growth); old_frag = frag_now; frag_now->fr_opcode = last_insn; @@ -3595,7 +3792,7 @@ xg_finish_frag (char *last_insn, xtensa_set_frag_assembly_state (frag_now); /* Just to make sure that we did not split it up. */ - assert (old_frag->fr_next == frag_now); + gas_assert (old_frag->fr_next == frag_now); } @@ -3723,19 +3920,17 @@ xg_build_token_insn (BuildInstr *instr_spec, TInsn *old_insn, TInsn *new_insn) case INSTR_INSTR: new_insn->insn_type = ITYPE_INSN; new_insn->opcode = instr_spec->opcode; - new_insn->is_specific_opcode = FALSE; - new_insn->linenum = old_insn->linenum; break; case INSTR_LITERAL_DEF: new_insn->insn_type = ITYPE_LITERAL; new_insn->opcode = XTENSA_UNDEFINED; - new_insn->is_specific_opcode = FALSE; - new_insn->linenum = old_insn->linenum; break; case INSTR_LABEL_DEF: - as_bad (_("INSTR_LABEL_DEF not supported yet")); - break; + abort (); } + new_insn->is_specific_opcode = FALSE; + new_insn->debug_line = old_insn->debug_line; + new_insn->loc_directive_seen = old_insn->loc_directive_seen; for (b_op = instr_spec->ops; b_op != NULL; b_op = b_op->next) { @@ -3747,14 +3942,14 @@ xg_build_token_insn (BuildInstr *instr_spec, TInsn *old_insn, TInsn *new_insn) { case OP_CONSTANT: /* The expression must be the constant. */ - assert (b_op->op_num < MAX_INSN_ARGS); + gas_assert (b_op->op_num < MAX_INSN_ARGS); exp = &new_insn->tok[b_op->op_num]; set_expr_const (exp, b_op->op_data); break; case OP_OPERAND: - assert (b_op->op_num < MAX_INSN_ARGS); - assert (b_op->op_data < (unsigned) old_insn->ntok); + gas_assert (b_op->op_num < MAX_INSN_ARGS); + gas_assert (b_op->op_data < (unsigned) old_insn->ntok); src_exp = &old_insn->tok[b_op->op_data]; exp = &new_insn->tok[b_op->op_num]; copy_expr (exp, src_exp); @@ -3763,11 +3958,11 @@ xg_build_token_insn (BuildInstr *instr_spec, TInsn *old_insn, TInsn *new_insn) case OP_LITERAL: case OP_LABEL: as_bad (_("can't handle generation of literal/labels yet")); - assert (0); + gas_assert (0); default: as_bad (_("can't handle undefined OP TYPE")); - assert (0); + gas_assert (0); } } @@ -3793,8 +3988,8 @@ xg_simplify_insn (TInsn *old_insn, TInsn *new_insn) insn_spec = rule->to_instr; /* There should only be one. */ - assert (insn_spec != NULL); - assert (insn_spec->next == NULL); + gas_assert (insn_spec != NULL); + gas_assert (insn_spec->next == NULL); if (insn_spec->next != NULL) return FALSE; @@ -3816,7 +4011,7 @@ xg_expand_assembly_insn (IStack *istack, TInsn *orig_insn) TInsn new_insn; bfd_boolean do_expand; - memset (&new_insn, 0, sizeof (TInsn)); + tinsn_init (&new_insn); /* Narrow it if we can. xg_simplify_insn now does all the appropriate checking (e.g., for the density option). */ @@ -3846,6 +4041,20 @@ xg_expand_assembly_insn (IStack *istack, TInsn *orig_insn) if (tinsn_has_invalid_symbolic_operands (orig_insn)) return TRUE; + /* Special case for extui opcode which has constraints not handled + by the ordinary operand encoding checks. The number of operands + and related syntax issues have already been checked. */ + if (orig_insn->opcode == xtensa_extui_opcode) + { + int shiftimm = orig_insn->tok[2].X_add_number; + int maskimm = orig_insn->tok[3].X_add_number; + if (shiftimm + maskimm > 32) + { + as_bad (_("immediate operands sum to greater than 32")); + return TRUE; + } + } + /* If the instruction will definitely need to be relaxed, it is better to expand it now for better scheduling. Decide whether to expand now.... */ @@ -3904,7 +4113,7 @@ xtensa_add_literal_sym (symbolS *sym) { sym_list *l; - l = (sym_list *) xmalloc (sizeof (sym_list)); + l = XNEW (sym_list); l->sym = sym; l->next = literal_syms; literal_syms = l; @@ -3946,6 +4155,9 @@ xg_assemble_literal (/* const */ TInsn *insn) { emit_state state; symbolS *lit_sym = NULL; + bfd_reloc_code_real_type reloc; + bfd_boolean pcrel = FALSE; + char *p; /* size = 4 for L32R. It could easily be larger when we move to larger constants. Add a parameter later. */ @@ -3956,8 +4168,8 @@ xg_assemble_literal (/* const */ TInsn *insn) set_expr_symbol_offset (&saved_loc, frag_now->fr_symbol, frag_now_fix ()); - assert (insn->insn_type == ITYPE_LITERAL); - assert (insn->ntok == 1); /* must be only one token here */ + gas_assert (insn->insn_type == ITYPE_LITERAL); + gas_assert (insn->ntok == 1); /* must be only one token here */ xtensa_switch_to_literal_fragment (&state); @@ -3981,21 +4193,33 @@ xg_assemble_literal (/* const */ TInsn *insn) frag_align (litalign, 0, 0); record_alignment (now_seg, litalign); - if (emit_val->X_op == O_pltrel) + switch (emit_val->X_op) { - char *p = frag_more (litsize); + case O_pcrel: + pcrel = TRUE; + /* fall through */ + case O_pltrel: + case O_tlsfunc: + case O_tlsarg: + case O_tpoff: + case O_dtpoff: + p = frag_more (litsize); xtensa_set_frag_assembly_state (frag_now); + reloc = map_operator_to_reloc (emit_val->X_op, TRUE); if (emit_val->X_add_symbol) emit_val->X_op = O_symbol; else emit_val->X_op = O_constant; fix_new_exp (frag_now, p - frag_now->fr_literal, - litsize, emit_val, 0, BFD_RELOC_XTENSA_PLT); + litsize, emit_val, pcrel, reloc); + break; + + default: + emit_expr (emit_val, litsize); + break; } - else - emit_expr (emit_val, litsize); - assert (frag_now->tc_frag_data.literal_frag == NULL); + gas_assert (frag_now->tc_frag_data.literal_frag == NULL); frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg); frag_now->fr_symbol = xtensa_create_literal_symbol (now_seg, frag_now); lit_sym = frag_now->fr_symbol; @@ -4015,7 +4239,7 @@ xg_assemble_literal_space (/* const */ int size, int slot) offsetT litalign = 2; /* 2^2 = 4 */ fragS *lit_saved_frag; - assert (size % 4 == 0); + gas_assert (size % 4 == 0); xtensa_switch_to_literal_fragment (&state); @@ -4023,7 +4247,7 @@ xg_assemble_literal_space (/* const */ int size, int slot) frag_align (litalign, 0, 0); record_alignment (now_seg, litalign); - xg_force_frag_space (size); + frag_grow (size); lit_saved_frag = frag_now; frag_now->tc_frag_data.literal_frag = get_literal_pool_location (now_seg); @@ -4044,7 +4268,7 @@ xg_add_opcode_fix (TInsn *tinsn, int opnum, xtensa_format fmt, int slot, - expressionS *expr, + expressionS *exp, fragS *fragP, offsetT offset) { @@ -4064,15 +4288,15 @@ xg_add_opcode_fix (TInsn *tinsn, } else if (opcode == xtensa_const16_opcode) { - if (expr->X_op == O_lo16) + if (exp->X_op == O_lo16) { reloc = encode_reloc (slot); - expr->X_op = O_symbol; + exp->X_op = O_symbol; } - else if (expr->X_op == O_hi16) + else if (exp->X_op == O_hi16) { reloc = encode_alt_reloc (slot); - expr->X_op = O_symbol; + exp->X_op = O_symbol; } } @@ -4086,7 +4310,7 @@ xg_add_opcode_fix (TInsn *tinsn, /* Handle erroneous "@h" and "@l" expressions here before they propagate into the symbol table where the generic portions of the assembler won't know what to do with them. */ - if (expr->X_op == O_lo16 || expr->X_op == O_hi16) + if (exp->X_op == O_lo16 || exp->X_op == O_hi16) { as_bad (_("invalid expression for operand %i of '%s'"), opnum + 1, xtensa_opcode_name (xtensa_default_isa, opcode)); @@ -4111,17 +4335,11 @@ xg_add_opcode_fix (TInsn *tinsn, } fmt_length = xtensa_format_length (xtensa_default_isa, fmt); - the_fix = fix_new_exp (fragP, offset, fmt_length, expr, + the_fix = fix_new_exp (fragP, offset, fmt_length, exp, howto->pc_relative, reloc); the_fix->fx_no_overflow = 1; - - if (expr->X_add_symbol - && (S_IS_EXTERNAL (expr->X_add_symbol) - || S_IS_WEAK (expr->X_add_symbol))) - the_fix->fx_plt = TRUE; - - the_fix->tc_fix_data.X_add_symbol = expr->X_add_symbol; - the_fix->tc_fix_data.X_add_number = expr->X_add_number; + the_fix->tc_fix_data.X_add_symbol = exp->X_add_symbol; + the_fix->tc_fix_data.X_add_number = exp->X_add_number; the_fix->tc_fix_data.slot = slot; return TRUE; @@ -4168,7 +4386,7 @@ xg_resolve_literals (TInsn *insn, symbolS *lit_sym) int i; if (lit_sym == 0) return; - assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->insn_type == ITYPE_INSN); for (i = 0; i < insn->ntok; i++) if (insn->tok[i].X_add_symbol == sym) insn->tok[i].X_add_symbol = lit_sym; @@ -4364,8 +4582,34 @@ frag_format_size (const fragS *fragP) /* If an instruction is about to grow, return the longer size. */ if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP1 - || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP2) - return 3; + || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP2 + || fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED_STEP3) + { + /* For most frags at RELAX_IMMED_STEPX, with X > 0, the first + instruction in the relaxed version is of length 3. (The case + where we have to pull the instruction out of a FLIX bundle + is handled conservatively above.) However, frags with opcodes + that are expanding to wide branches end up having formats that + are not determinable by the RELAX_IMMED_STEPX enumeration, and + we can't tell directly what format the relaxer picked. This + is a wart in the design of the relaxer that should someday be + fixed, but would require major changes, or at least should + be accompanied by major changes to make use of that data. + + In any event, we can tell that we are expanding from a single-slot + format to a wider one with the logic below. */ + + int i; + int relaxed_size = fmt_size + fragP->tc_frag_data.text_expansion[0]; + + for (i = 0; i < xtensa_isa_num_formats (isa); i++) + { + if (relaxed_size == xtensa_format_length (isa, i)) + return relaxed_size; + } + + return 3; + } if (fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW) return 2 + fragP->tc_frag_data.text_expansion[0]; @@ -4419,7 +4663,7 @@ update_next_frag_state (fragS *fragP) || next_fragP->fr_subtype == RELAX_UNREACHABLE))) next_fragP = next_fragP->fr_next; - assert (next_fragP->fr_type == rs_machine_dependent + gas_assert (next_fragP->fr_type == rs_machine_dependent && (next_fragP->fr_subtype == RELAX_MAYBE_UNREACHABLE || next_fragP->fr_subtype == RELAX_UNREACHABLE)); @@ -4430,7 +4674,7 @@ update_next_frag_state (fragS *fragP) || new_target->fr_subtype == RELAX_DESIRE_ALIGN))) new_target = new_target->fr_next; - assert (new_target->fr_type == rs_machine_dependent + gas_assert (new_target->fr_type == rs_machine_dependent && (new_target->fr_subtype == RELAX_MAYBE_DESIRE_ALIGN || new_target->fr_subtype == RELAX_DESIRE_ALIGN)); } @@ -4481,6 +4725,12 @@ next_frag_is_loop_target (const fragS *fragP) } +/* As specified in the relaxation table, when a loop instruction is + relaxed, there are 24 bytes between the loop instruction itself and + the first instruction in the loop. */ + +#define RELAXED_LOOP_INSN_BYTES 24 + static addressT next_frag_pre_opcode_bytes (const fragS *fragp) { @@ -4503,7 +4753,7 @@ next_frag_pre_opcode_bytes (const fragS *fragp) been relaxed. Note that we can assume that the LOOP instruction is in slot 0 because loops aren't bundleable. */ if (next_fragp->tc_frag_data.slot_subtypes[0] > RELAX_IMMED) - return get_expanded_loop_offset (next_opcode); + return get_expanded_loop_offset (next_opcode) + RELAXED_LOOP_INSN_BYTES; return 0; } @@ -4528,6 +4778,9 @@ xtensa_mark_literal_pool_location (void) fixes into this frchain's fix list. */ pool_location = frag_now; frag_now->tc_frag_data.lit_frchain = frchain_now; + frag_now->tc_frag_data.literal_frag = frag_now; + /* Just record this frag. */ + xtensa_maybe_create_literal_pool_frag (FALSE, FALSE); frag_variant (rs_machine_dependent, 0, 0, RELAX_LITERAL_POOL_BEGIN, NULL, 0, NULL); xtensa_set_frag_assembly_state (frag_now); @@ -4579,7 +4832,7 @@ build_nop (TInsn *tinsn, int size) else tinsn->opcode = xtensa_nop_opcode; - assert (tinsn->opcode != XTENSA_UNDEFINED); + gas_assert (tinsn->opcode != XTENSA_UNDEFINED); } } @@ -4617,7 +4870,7 @@ get_expanded_loop_offset (xtensa_opcode opcode) /* This is the OFFSET of the loop instruction in the expanded loop. This MUST correspond directly to the specification of the loop expansion. It will be validated on fragment conversion. */ - assert (opcode != XTENSA_UNDEFINED); + gas_assert (opcode != XTENSA_UNDEFINED); if (opcode == xtensa_loop_opcode) return 0; if (opcode == xtensa_loopnez_opcode) @@ -4632,6 +4885,31 @@ get_expanded_loop_offset (xtensa_opcode opcode) static fragS * get_literal_pool_location (segT seg) { + struct litpool_seg *lps = litpool_seg_list.next; + struct litpool_frag *lpf; + for ( ; lps && lps->seg->id != seg->id; lps = lps->next) + ; + if (lps) + { + for (lpf = lps->frag_list.prev; lpf->fragP; lpf = lpf->prev) + { /* Skip "candidates" for now. */ + if (lpf->fragP->fr_subtype == RELAX_LITERAL_POOL_BEGIN && + lpf->priority == 1) + return lpf->fragP; + } + /* Must convert a lower-priority pool. */ + for (lpf = lps->frag_list.prev; lpf->fragP; lpf = lpf->prev) + { + if (lpf->fragP->fr_subtype == RELAX_LITERAL_POOL_BEGIN) + return lpf->fragP; + } + /* Still no match -- try for a low priority pool. */ + for (lpf = lps->frag_list.prev; lpf->fragP; lpf = lpf->prev) + { + if (lpf->fragP->fr_subtype == RELAX_LITERAL_POOL_CANDIDATE_BEGIN) + return lpf->fragP; + } + } return seg_info (seg)->tc_segment_info_data.literal_pool_loc; } @@ -4668,7 +4946,57 @@ xtensa_set_frag_assembly_state (fragS *fragP) static bfd_boolean relaxable_section (asection *sec) { - return (sec->flags & SEC_DEBUGGING) == 0; + return ((sec->flags & SEC_DEBUGGING) == 0 + && strcmp (sec->name, ".eh_frame") != 0); +} + + +static void +xtensa_mark_frags_for_org (void) +{ + segT *seclist; + + /* Walk over each fragment of all of the current segments. If we find + a .org frag in any of the segments, mark all frags prior to it as + "no transform", which will prevent linker optimizations from messing + up the .org distance. This should be done after + xtensa_find_unmarked_state_frags, because we don't want to worry here + about that function trashing the data we save here. */ + + for (seclist = &stdoutput->sections; + seclist && *seclist; + seclist = &(*seclist)->next) + { + segT sec = *seclist; + segment_info_type *seginfo; + fragS *fragP; + flagword flags; + flags = bfd_get_section_flags (stdoutput, sec); + if (flags & SEC_DEBUGGING) + continue; + if (!(flags & SEC_ALLOC)) + continue; + + seginfo = seg_info (sec); + if (seginfo && seginfo->frchainP) + { + fragS *last_fragP = seginfo->frchainP->frch_root; + for (fragP = seginfo->frchainP->frch_root; fragP; + fragP = fragP->fr_next) + { + /* cvt_frag_to_fill has changed the fr_type of org frags to + rs_fill, so use the value as cached in rs_subtype here. */ + if (fragP->fr_subtype == RELAX_ORG) + { + while (last_fragP != fragP->fr_next) + { + last_fragP->tc_frag_data.is_no_transform = TRUE; + last_fragP = last_fragP->fr_next; + } + } + } + } + } } @@ -4791,16 +5119,22 @@ xtensa_find_unaligned_loops (bfd *abfd ATTRIBUTE_UNUSED, addressT frag_addr; xtensa_format fmt; - xtensa_insnbuf_from_chars - (isa, insnbuf, (unsigned char *) frag->fr_literal, 0); - fmt = xtensa_format_decode (isa, insnbuf); - op_size = xtensa_format_length (isa, fmt); - frag_addr = frag->fr_address % xtensa_fetch_width; + if (frag->fr_fix == 0) + frag = next_non_empty_frag (frag); - if (frag_addr + op_size > xtensa_fetch_width) - as_warn_where (frag->fr_file, frag->fr_line, - _("unaligned loop: %d bytes at 0x%lx"), - op_size, (long) frag->fr_address); + if (frag) + { + xtensa_insnbuf_from_chars + (isa, insnbuf, (unsigned char *) frag->fr_literal, 0); + fmt = xtensa_format_decode (isa, insnbuf); + op_size = xtensa_format_length (isa, fmt); + frag_addr = frag->fr_address % xtensa_fetch_width; + + if (frag_addr + op_size > xtensa_fetch_width) + as_warn_where (frag->fr_file, frag->fr_line, + _("unaligned loop: %d bytes at 0x%lx"), + op_size, (long) frag->fr_address); + } } frag = frag->fr_next; } @@ -4821,8 +5155,8 @@ xg_apply_fix_value (fixS *fixP, valueT val) xtensa_opcode opcode; char *const fixpos = fixP->fx_frag->fr_literal + fixP->fx_where; - (void) decode_reloc (fixP->fx_r_type, &slot, &alt_reloc); - if (alt_reloc) + if (decode_reloc (fixP->fx_r_type, &slot, &alt_reloc) + || alt_reloc) as_fatal (_("unexpected fix")); if (!insnbuf) @@ -4893,6 +5227,7 @@ md_begin (void) segT current_section = now_seg; int current_subsec = now_subseg; xtensa_isa isa; + int i; xtensa_default_isa = xtensa_isa_init (0, 0); isa = xtensa_default_isa; @@ -4904,8 +5239,6 @@ md_begin (void) subseg_set (current_section, current_subsec); - xg_init_vinsn (&cur_vinsn); - xtensa_addi_opcode = xtensa_opcode_lookup (isa, "addi"); xtensa_addmi_opcode = xtensa_opcode_lookup (isa, "addmi"); xtensa_call0_opcode = xtensa_opcode_lookup (isa, "call0"); @@ -4918,9 +5251,11 @@ md_begin (void) xtensa_callx12_opcode = xtensa_opcode_lookup (isa, "callx12"); xtensa_const16_opcode = xtensa_opcode_lookup (isa, "const16"); xtensa_entry_opcode = xtensa_opcode_lookup (isa, "entry"); + xtensa_extui_opcode = xtensa_opcode_lookup (isa, "extui"); xtensa_movi_opcode = xtensa_opcode_lookup (isa, "movi"); xtensa_movi_n_opcode = xtensa_opcode_lookup (isa, "movi.n"); xtensa_isync_opcode = xtensa_opcode_lookup (isa, "isync"); + xtensa_j_opcode = xtensa_opcode_lookup (isa, "j"); xtensa_jx_opcode = xtensa_opcode_lookup (isa, "jx"); xtensa_l32r_opcode = xtensa_opcode_lookup (isa, "l32r"); xtensa_loop_opcode = xtensa_opcode_lookup (isa, "loop"); @@ -4936,6 +5271,17 @@ md_begin (void) xtensa_rsr_lcount_opcode = xtensa_opcode_lookup (isa, "rsr.lcount"); xtensa_waiti_opcode = xtensa_opcode_lookup (isa, "waiti"); + for (i = 0; i < xtensa_isa_num_formats (isa); i++) + { + int format_slots = xtensa_format_num_slots (isa, i); + if (format_slots > config_max_slots) + config_max_slots = format_slots; + } + + xg_init_vinsn (&cur_vinsn); + + xtensa_num_pipe_stages = xtensa_isa_num_pipe_stages (isa); + init_op_placement_info_table (); /* Set up the assembly state. */ @@ -4991,23 +5337,25 @@ xtensa_frob_label (symbolS *sym) frag_now->fr_symbol, frag_now->fr_offset, NULL); xtensa_set_frag_assembly_state (frag_now); - xtensa_move_labels (frag_now, 0, TRUE); + xtensa_move_labels (frag_now, 0); } /* No target aligning in the absolute section. */ if (now_seg != absolute_section - && do_align_targets () && !is_unaligned_label (sym) && !generating_literals) { xtensa_set_frag_assembly_state (frag_now); - frag_var (rs_machine_dependent, - 0, (int) freq, - RELAX_DESIRE_ALIGN_IF_TARGET, - frag_now->fr_symbol, frag_now->fr_offset, NULL); + if (do_align_targets ()) + frag_var (rs_machine_dependent, 0, (int) freq, + RELAX_DESIRE_ALIGN_IF_TARGET, frag_now->fr_symbol, + frag_now->fr_offset, NULL); + else + frag_var (rs_fill, 0, 0, frag_now->fr_subtype, + frag_now->fr_symbol, frag_now->fr_offset, NULL); xtensa_set_frag_assembly_state (frag_now); - xtensa_move_labels (frag_now, 0, TRUE); + xtensa_move_labels (frag_now, 0); } /* We need to mark the following properties even if we aren't aligning. */ @@ -5076,6 +5424,15 @@ xtensa_unrecognized_line (int ch) void xtensa_flush_pending_output (void) { + /* This line fixes a bug where automatically generated gstabs info + separates a function label from its entry instruction, ending up + with the literal position between the function label and the entry + instruction and crashing code. It only happens with --gstabs and + --text-section-literals, and when several other obscure relaxation + conditions are met. */ + if (outputting_stabs_line_debug) + return; + if (cur_vinsn.inside_bundle) as_bad (_("missing closing brace")); @@ -5115,7 +5472,7 @@ void md_assemble (char *str) { xtensa_isa isa = xtensa_default_isa; - char *opname, *file_name; + char *opname; unsigned opnamelen; bfd_boolean has_underbar = FALSE; char *arg_strings[MAX_INSN_ARGS]; @@ -5126,9 +5483,7 @@ md_assemble (char *str) /* Split off the opcode. */ opnamelen = strspn (str, "abcdefghijklmnopqrstuvwxyz_/0123456789."); - opname = xmalloc (opnamelen + 1); - memcpy (opname, str, opnamelen); - opname[opnamelen] = '\0'; + opname = xstrndup (str, opnamelen); num_args = tokenize_arguments (arg_strings, str + opnamelen); if (num_args == -1) @@ -5150,16 +5505,87 @@ md_assemble (char *str) orig_insn.insn_type = ITYPE_INSN; orig_insn.ntok = 0; orig_insn.is_specific_opcode = (has_underbar || !use_transform ()); - orig_insn.opcode = xtensa_opcode_lookup (isa, opname); - if (orig_insn.opcode == XTENSA_UNDEFINED) - { - xtensa_format fmt = xtensa_format_lookup (isa, opname); - if (fmt == XTENSA_UNDEFINED) + + /* Special case: Check for "CALLXn.TLS" psuedo op. If found, grab its + extra argument and set the opcode to "CALLXn". */ + if (orig_insn.opcode == XTENSA_UNDEFINED + && strncasecmp (opname, "callx", 5) == 0) + { + unsigned long window_size; + char *suffix; + + window_size = strtoul (opname + 5, &suffix, 10); + if (suffix != opname + 5 + && (window_size == 0 + || window_size == 4 + || window_size == 8 + || window_size == 12) + && strcasecmp (suffix, ".tls") == 0) { - as_bad (_("unknown opcode or format name '%s'"), opname); - error_reset_cur_vinsn (); - return; + switch (window_size) + { + case 0: orig_insn.opcode = xtensa_callx0_opcode; break; + case 4: orig_insn.opcode = xtensa_callx4_opcode; break; + case 8: orig_insn.opcode = xtensa_callx8_opcode; break; + case 12: orig_insn.opcode = xtensa_callx12_opcode; break; + } + + if (num_args != 2) + as_bad (_("wrong number of operands for '%s'"), opname); + else + { + bfd_reloc_code_real_type reloc; + char *old_input_line_pointer; + expressionS *tok = &orig_insn.extra_arg; + + old_input_line_pointer = input_line_pointer; + input_line_pointer = arg_strings[num_args - 1]; + + expression (tok); + if (tok->X_op == O_symbol + && ((reloc = xtensa_elf_suffix (&input_line_pointer, tok)) + == BFD_RELOC_XTENSA_TLS_CALL)) + tok->X_op = map_suffix_reloc_to_operator (reloc); + else + as_bad (_("bad relocation expression for '%s'"), opname); + + input_line_pointer = old_input_line_pointer; + num_args -= 1; + } + } + } + + /* Special case: Check for "j.l" psuedo op. */ + if (orig_insn.opcode == XTENSA_UNDEFINED + && strncasecmp (opname, "j.l", 3) == 0) + { + if (num_args != 2) + as_bad (_("wrong number of operands for '%s'"), opname); + else + { + char *old_input_line_pointer; + expressionS *tok = &orig_insn.extra_arg; + + old_input_line_pointer = input_line_pointer; + input_line_pointer = arg_strings[num_args - 1]; + + expression_maybe_register (xtensa_jx_opcode, 0, tok); + input_line_pointer = old_input_line_pointer; + + num_args -= 1; + orig_insn.opcode = xtensa_j_opcode; + } + } + + if (orig_insn.opcode == XTENSA_UNDEFINED) + { + xtensa_format fmt = xtensa_format_lookup (isa, opname); + if (fmt == XTENSA_UNDEFINED) + { + as_bad (_("unknown opcode or format name '%s'"), opname); + error_reset_cur_vinsn (); + return; } if (!cur_vinsn.inside_bundle) { @@ -5204,11 +5630,12 @@ md_assemble (char *str) return; } - /* A FLIX bundle may be spread across multiple input lines. We want to - report the first such line in the debug information. Record the line - number for each TInsn (assume the file name doesn't change), so the - first line can be found later. */ - as_where (&file_name, &orig_insn.linenum); + /* Record the line number for each TInsn, because a FLIX bundle may be + spread across multiple input lines and individual instructions may be + moved around in some cases. */ + orig_insn.loc_directive_seen = dwarf2_loc_directive_seen; + dwarf2_where (&orig_insn.debug_line); + dwarf2_consume_line_info (); xg_add_branch_and_loop_targets (&orig_insn); @@ -5240,6 +5667,8 @@ md_assemble (char *str) /* We've just emitted a new instruction so clear the list of labels. */ xtensa_clear_insn_labels (); + + xtensa_check_frag_count (); } @@ -5256,7 +5685,6 @@ xtensa_handle_align (fragS *fragP) && ! fragP->tc_frag_data.is_literal && (fragP->fr_type == rs_align || fragP->fr_type == rs_align_code) - && fragP->fr_address + fragP->fr_fix > 0 && fragP->fr_offset > 0 && now_seg != bss_section) { @@ -5272,6 +5700,9 @@ xtensa_handle_align (fragS *fragP) as_bad_where (fragP->fr_file, fragP->fr_line, _("unaligned entry instruction")); } + + if (linkrelax && fragP->fr_type == rs_org) + fragP->fr_subtype = RELAX_ORG; } @@ -5318,6 +5749,9 @@ md_pcrel_from (fixS *fixP) if (fixP->fx_r_type == BFD_RELOC_XTENSA_ASM_EXPAND) return 0; + if (fixP->fx_r_type == BFD_RELOC_32_PCREL) + return addr; + if (!insnbuf) { insnbuf = xtensa_insnbuf_alloc (isa); @@ -5460,14 +5894,6 @@ xtensa_elf_section_change_hook (void) bfd_boolean xtensa_fix_adjustable (fixS *fixP) { - /* An offset is not allowed in combination with the difference of two - symbols, but that cannot be easily detected after a local symbol - has been adjusted to a (section+offset) form. Return 0 so that such - an fix will not be adjusted. */ - if (fixP->fx_subsy && fixP->fx_addsy && fixP->fx_offset - && relaxable_section (S_GET_SEGMENT (fixP->fx_subsy))) - return 0; - /* We need the symbol name for the VTABLE entries. */ if (fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY) @@ -5477,6 +5903,21 @@ xtensa_fix_adjustable (fixS *fixP) } +/* tc_symbol_new_hook */ + +symbolS *expr_symbols = NULL; + +void +xtensa_symbol_new_hook (symbolS *sym) +{ + if (is_leb128_expr && S_GET_SEGMENT (sym) == expr_section) + { + symbol_get_tc (sym)->next_expr_symbol = expr_symbols; + expr_symbols = sym; + } +} + + void md_apply_fix (fixS *fixP, valueT *valP, segT seg) { @@ -5492,6 +5933,7 @@ md_apply_fix (fixS *fixP, valueT *valP, segT seg) switch (fixP->fx_r_type) { + case BFD_RELOC_32_PCREL: case BFD_RELOC_32: case BFD_RELOC_16: case BFD_RELOC_8: @@ -5501,26 +5943,20 @@ md_apply_fix (fixS *fixP, valueT *valP, segT seg) { case BFD_RELOC_8: fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF8; + fixP->fx_signed = 0; break; case BFD_RELOC_16: fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF16; + fixP->fx_signed = 0; break; case BFD_RELOC_32: fixP->fx_r_type = BFD_RELOC_XTENSA_DIFF32; + fixP->fx_signed = 0; break; default: break; } - /* An offset is only allowed when it results from adjusting a - local symbol into a section-relative offset. If the offset - came from the original expression, tc_fix_adjustable will have - prevented the fix from being converted to a section-relative - form so that we can flag the error here. */ - if (fixP->fx_offset != 0 && !symbol_section_p (fixP->fx_addsy)) - as_bad_where (fixP->fx_file, fixP->fx_line, - _("cannot represent subtraction with an offset")); - val = (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset - S_GET_VALUE (fixP->fx_subsy)); @@ -5543,6 +5979,15 @@ md_apply_fix (fixS *fixP, valueT *valP, segT seg) fixP->fx_no_overflow = 0; /* Use the standard overflow check. */ break; + case BFD_RELOC_XTENSA_TLSDESC_FN: + case BFD_RELOC_XTENSA_TLSDESC_ARG: + case BFD_RELOC_XTENSA_TLS_TPOFF: + case BFD_RELOC_XTENSA_TLS_DTPOFF: + S_SET_THREAD_LOCAL (fixP->fx_addsy); + md_number_to_chars (fixpos, 0, fixP->fx_size); + fixP->fx_no_overflow = 0; /* Use the standard overflow check. */ + break; + case BFD_RELOC_XTENSA_SLOT0_OP: case BFD_RELOC_XTENSA_SLOT1_OP: case BFD_RELOC_XTENSA_SLOT2_OP: @@ -5565,8 +6010,8 @@ md_apply_fix (fixS *fixP, valueT *valP, segT seg) by the linker, and it makes the object file disassembly readable when all branch targets are encoded in relocations. */ - assert (fixP->fx_addsy); - if (S_GET_SEGMENT (fixP->fx_addsy) == seg && !fixP->fx_plt + gas_assert (fixP->fx_addsy); + if (S_GET_SEGMENT (fixP->fx_addsy) == seg && !S_FORCE_RELOC (fixP->fx_addsy, 1)) { val = (S_GET_VALUE (fixP->fx_addsy) + fixP->fx_offset @@ -5583,6 +6028,9 @@ md_apply_fix (fixS *fixP, valueT *valP, segT seg) break; case BFD_RELOC_XTENSA_ASM_EXPAND: + case BFD_RELOC_XTENSA_TLS_FUNC: + case BFD_RELOC_XTENSA_TLS_ARG: + case BFD_RELOC_XTENSA_TLS_CALL: case BFD_RELOC_XTENSA_SLOT0_ALT: case BFD_RELOC_XTENSA_SLOT1_ALT: case BFD_RELOC_XTENSA_SLOT2_ALT: @@ -5613,46 +6061,10 @@ md_apply_fix (fixS *fixP, valueT *valP, segT seg) } -char * +const char * md_atof (int type, char *litP, int *sizeP) { - int prec; - LITTLENUM_TYPE words[4]; - char *t; - int i; - - switch (type) - { - case 'f': - prec = 2; - break; - - case 'd': - prec = 4; - break; - - default: - *sizeP = 0; - return "bad call to md_atof"; - } - - t = atof_ieee (input_line_pointer, type, words); - if (t) - input_line_pointer = t; - - *sizeP = prec * 2; - - for (i = prec - 1; i >= 0; i--) - { - int idx = i; - if (target_big_endian) - idx = (prec - 1 - i); - - md_number_to_chars (litP, (valueT) words[idx], 2); - litP += 2; - } - - return NULL; + return ieee_md_atof (type, litP, sizeP, target_big_endian); } @@ -5671,14 +6083,14 @@ tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp) { arelent *reloc; - reloc = (arelent *) xmalloc (sizeof (arelent)); - reloc->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *)); + reloc = XNEW (arelent); + reloc->sym_ptr_ptr = XNEW (asymbol *); *reloc->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy); reloc->address = fixp->fx_frag->fr_address + fixp->fx_where; /* Make sure none of our internal relocations make it this far. They'd better have been fully resolved by this point. */ - assert ((int) fixp->fx_r_type > 0); + gas_assert ((int) fixp->fx_r_type > 0); reloc->addend = fixp->fx_offset; @@ -5694,7 +6106,7 @@ tc_gen_reloc (asection *section ATTRIBUTE_UNUSED, fixS *fixp) } if (!fixp->fx_pcrel != !reloc->howto->pc_relative) - as_fatal (_("internal error? cannot generate `%s' relocation"), + as_fatal (_("internal error; cannot generate `%s' relocation"), bfd_get_reloc_code_name (fixp->fx_r_type)); return reloc; @@ -5717,7 +6129,7 @@ new_resource_table (void *data, opcode_funcUnit_use_stage_func ousf) { int i; - resource_table *rt = (resource_table *) xmalloc (sizeof (resource_table)); + resource_table *rt = XNEW (resource_table); rt->data = data; rt->cycles = cycles; rt->allocated_cycles = cycles; @@ -5727,9 +6139,9 @@ new_resource_table (void *data, rt->opcode_unit_use = ouuf; rt->opcode_unit_stage = ousf; - rt->units = (unsigned char **) xcalloc (cycles, sizeof (unsigned char *)); + rt->units = XCNEWVEC (unsigned char *, cycles); for (i = 0; i < cycles; i++) - rt->units[i] = (unsigned char *) xcalloc (nu, sizeof (unsigned char)); + rt->units[i] = XCNEWVEC (unsigned char, nu); return rt; } @@ -5759,13 +6171,11 @@ resize_resource_table (resource_table *rt, int cycles) old_cycles = rt->allocated_cycles; rt->allocated_cycles = cycles; - rt->units = xrealloc (rt->units, - rt->allocated_cycles * sizeof (unsigned char *)); + rt->units = XRESIZEVEC (unsigned char *, rt->units, rt->allocated_cycles); for (i = 0; i < old_cycles; i++) - rt->units[i] = xrealloc (rt->units[i], - rt->num_units * sizeof (unsigned char)); + rt->units[i] = XRESIZEVEC (unsigned char, rt->units[i], rt->num_units); for (i = old_cycles; i < cycles; i++) - rt->units[i] = xcalloc (rt->num_units, sizeof (unsigned char)); + rt->units[i] = XCNEWVEC (unsigned char, rt->num_units); } @@ -5817,7 +6227,7 @@ release_resources (resource_table *rt, xtensa_opcode opcode, int cycle) { xtensa_funcUnit unit = (rt->opcode_unit_use) (rt->data, opcode, i); int stage = (rt->opcode_unit_stage) (rt->data, opcode, i); - assert (rt->units[stage + cycle][unit] > 0); + gas_assert (rt->units[stage + cycle][unit] > 0); rt->units[stage + cycle][unit]--; } } @@ -5862,7 +6272,7 @@ resources_conflict (vliw_insn *vinsn) { xtensa_isa isa = xtensa_default_isa; rt = new_resource_table - (isa, xtensa_isa_num_pipe_stages (isa), + (isa, xtensa_num_pipe_stages, xtensa_isa_num_funcUnits (isa), (unit_num_copies_func) xtensa_funcUnit_num_copies, (opcode_num_units_func) xtensa_opcode_num_funcUnit_uses, @@ -5897,8 +6307,6 @@ finish_vinsn (vliw_insn *vinsn) { IStack slotstack; int i; - char *file_name; - unsigned line; if (find_vinsn_conflicts (vinsn)) { @@ -5910,11 +6318,17 @@ finish_vinsn (vliw_insn *vinsn) if (vinsn->format == XTENSA_UNDEFINED) vinsn->format = xg_find_narrowest_format (vinsn); + if (xtensa_format_num_slots (xtensa_default_isa, vinsn->format) > 1 + && produce_flix == FLIX_NONE) + { + as_bad (_("The option \"--no-allow-flix\" prohibits multi-slot flix.")); + xg_clear_vinsn (vinsn); + return; + } + if (vinsn->format == XTENSA_UNDEFINED) { - as_where (&file_name, &line); - as_bad_where (file_name, line, - _("couldn't find a valid instruction format")); + as_bad (_("couldn't find a valid instruction format")); fprintf (stderr, _(" ops were: ")); for (i = 0; i < vinsn->num_slots; i++) fprintf (stderr, _(" %s;"), @@ -5938,8 +6352,7 @@ finish_vinsn (vliw_insn *vinsn) if (resources_conflict (vinsn)) { - as_where (&file_name, &line); - as_bad_where (file_name, line, _("illegal resource usage in bundle")); + as_bad (_("illegal resource usage in bundle")); fprintf (stderr, " ops were: "); for (i = 0; i < vinsn->num_slots; i++) fprintf (stderr, " %s;", @@ -5991,12 +6404,12 @@ finish_vinsn (vliw_insn *vinsn) TInsn *insn = &slotstack.insn[j]; if (insn->insn_type == ITYPE_LITERAL) { - assert (lit_sym == NULL); + gas_assert (lit_sym == NULL); lit_sym = xg_assemble_literal (insn); } else { - assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->insn_type == ITYPE_INSN); if (lit_sym) xg_resolve_literals (insn, lit_sym); if (j != slotstack.ninsn - 1) @@ -6036,8 +6449,7 @@ finish_vinsn (vliw_insn *vinsn) /* Now check resource conflicts on the modified bundle. */ if (resources_conflict (vinsn)) { - as_where (&file_name, &line); - as_bad_where (file_name, line, _("illegal resource usage in bundle")); + as_bad (_("illegal resource usage in bundle")); fprintf (stderr, " ops were: "); for (i = 0; i < vinsn->num_slots; i++) fprintf (stderr, " %s;", @@ -6055,6 +6467,8 @@ finish_vinsn (vliw_insn *vinsn) xg_assemble_vliw_tokens (vinsn); xg_clear_vinsn (vinsn); + + xtensa_check_frag_count (); } @@ -6097,7 +6511,7 @@ find_vinsn_conflicts (vliw_insn *vinsn) int branches = 0; xtensa_isa isa = xtensa_default_isa; - assert (!past_xtensa_end); + gas_assert (!past_xtensa_end); for (i = 0 ; i < vinsn->num_slots; i++) { @@ -6269,7 +6683,7 @@ check_t1_t2_reads_and_writes (TInsn *t1, TInsn *t2) { xtensa_state t1_so = xtensa_stateOperand_state (isa, t1->opcode, i); t1_inout = xtensa_stateOperand_inout (isa, t1->opcode, i); - if (t1_so != t2_so) + if (t1_so != t2_so || xtensa_state_is_shared_or (isa, t1_so) == 1) continue; if (t2_inout == 'i' && (t1_inout == 'm' || t1_inout == 'o')) @@ -6349,7 +6763,6 @@ xg_find_narrowest_format (vliw_insn *vinsn) xtensa_isa isa = xtensa_default_isa; xtensa_format format; - vliw_insn v_copy = *vinsn; xtensa_opcode nop_opcode = xtensa_nop_opcode; if (vinsn->num_slots == 1) @@ -6357,7 +6770,8 @@ xg_find_narrowest_format (vliw_insn *vinsn) for (format = 0; format < xtensa_isa_num_formats (isa); format++) { - v_copy = *vinsn; + vliw_insn v_copy; + xg_copy_vinsn (&v_copy, vinsn); if (xtensa_format_num_slots (isa, format) == v_copy.num_slots) { int slot; @@ -6392,7 +6806,7 @@ xg_find_narrowest_format (vliw_insn *vinsn) } if (fit == v_copy.num_slots) { - *vinsn = v_copy; + xg_copy_vinsn (vinsn, &v_copy); xtensa_format_encode (isa, format, vinsn->insnbuf); vinsn->format = format; break; @@ -6479,7 +6893,7 @@ bundle_tinsn (TInsn *tinsn, vliw_insn *vinsn) int slot, chosen_slot; vinsn->format = xg_get_single_format (tinsn->opcode); - assert (vinsn->format != XTENSA_UNDEFINED); + gas_assert (vinsn->format != XTENSA_UNDEFINED); vinsn->num_slots = xtensa_format_num_slots (isa, vinsn->format); chosen_slot = xg_get_single_slot (tinsn->opcode); @@ -6516,7 +6930,11 @@ emit_single_op (TInsn *orig_insn) || orig_insn->opcode == xtensa_movi_n_opcode) && !cur_vinsn.inside_bundle && (orig_insn->tok[1].X_op == O_symbol - || orig_insn->tok[1].X_op == O_pltrel) + || orig_insn->tok[1].X_op == O_pltrel + || orig_insn->tok[1].X_op == O_tlsfunc + || orig_insn->tok[1].X_op == O_tlsarg + || orig_insn->tok[1].X_op == O_tpoff + || orig_insn->tok[1].X_op == O_dtpoff) && !orig_insn->is_specific_opcode && use_transform ()) xg_assembly_relax (&istack, orig_insn, now_seg, frag_now, 0, 1, 0); else @@ -6529,18 +6947,18 @@ emit_single_op (TInsn *orig_insn) switch (insn->insn_type) { case ITYPE_LITERAL: - assert (lit_sym == NULL); + gas_assert (lit_sym == NULL); lit_sym = xg_assemble_literal (insn); break; case ITYPE_LABEL: { static int relaxed_sym_idx = 0; - char *label = xmalloc (strlen (FAKE_LABEL_NAME) + 12); + char *label = XNEWVEC (char, strlen (FAKE_LABEL_NAME) + 12); sprintf (label, "%s_rl_%x", FAKE_LABEL_NAME, relaxed_sym_idx++); colon (label); - assert (label_sym == NULL); + gas_assert (label_sym == NULL); label_sym = symbol_find_or_make (label); - assert (label_sym); + gas_assert (label_sym); free (label); } break; @@ -6558,7 +6976,7 @@ emit_single_op (TInsn *orig_insn) } break; default: - assert (0); + gas_assert (0); break; } } @@ -6572,7 +6990,7 @@ total_frag_text_expansion (fragS *fragP) int slot; int total_expansion = 0; - for (slot = 0; slot < MAX_SLOTS; slot++) + for (slot = 0; slot < config_max_slots; slot++) total_expansion += fragP->tc_frag_data.text_expansion[slot]; return total_expansion; @@ -6588,15 +7006,15 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) bfd_boolean is_jump = FALSE; bfd_boolean is_branch = FALSE; xtensa_isa isa = xtensa_default_isa; - int i; int insn_size; int extra_space; char *f = NULL; int slot; - unsigned current_line, best_linenum; - char *current_file; + struct dwarf2_line_info debug_line; + bfd_boolean loc_directive_seen = FALSE; + TInsn *tinsn; - best_linenum = UINT_MAX; + memset (&debug_line, 0, sizeof (struct dwarf2_line_info)); if (generating_literals) { @@ -6613,7 +7031,7 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) if (frag_now_fix () != 0 && (! frag_now->tc_frag_data.is_insn || (vinsn_has_specific_opcodes (vinsn) && use_transform ()) - || !use_transform () != frag_now->tc_frag_data.is_no_transform + || (!use_transform ()) != frag_now->tc_frag_data.is_no_transform || (directive_state[directive_longcalls] != frag_now->tc_frag_data.use_longcalls) || (directive_state[directive_absolute_literals] @@ -6651,15 +7069,22 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) xtensa_set_frag_assembly_state (frag_now); } - for (i = 0; i < vinsn->num_slots; i++) + for (slot = 0; slot < vinsn->num_slots; slot++) { + tinsn = &vinsn->slots[slot]; + /* See if the instruction implies an aligned section. */ - if (xtensa_opcode_is_loop (isa, vinsn->slots[i].opcode) == 1) + if (xtensa_opcode_is_loop (isa, tinsn->opcode) == 1) record_alignment (now_seg, 2); - /* Also determine the best line number for debug info. */ - best_linenum = vinsn->slots[i].linenum < best_linenum - ? vinsn->slots[i].linenum : best_linenum; + /* Determine the best line number for debug info. */ + if ((tinsn->loc_directive_seen || !loc_directive_seen) + && (tinsn->debug_line.filenum != debug_line.filenum + || tinsn->debug_line.line < debug_line.line + || tinsn->debug_line.column < debug_line.column)) + debug_line = tinsn->debug_line; + if (tinsn->loc_directive_seen) + loc_directive_seen = TRUE; } /* Special cases for instructions that force an alignment... */ @@ -6690,15 +7115,13 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) frag_var (rs_machine_dependent, 0, 0, RELAX_CHECK_ALIGN_NEXT_OPCODE, target_sym, 0, NULL); xtensa_set_frag_assembly_state (frag_now); - - xtensa_move_labels (frag_now, 0, FALSE); } if (vinsn->slots[0].opcode == xtensa_entry_opcode && !vinsn->slots[0].is_specific_opcode) { xtensa_mark_literal_pool_location (); - xtensa_move_labels (frag_now, 0, TRUE); + xtensa_move_labels (frag_now, 0); frag_var (rs_align_test, 1, 1, 0, NULL, 2, NULL); } @@ -6732,25 +7155,28 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) xtensa_insnbuf_to_chars (isa, vinsn->insnbuf, (unsigned char *) f, 0); - /* Temporarily set the logical line number to the one we want to appear - in the debug information. */ - as_where (¤t_file, ¤t_line); - new_logical_line (current_file, best_linenum); - dwarf2_emit_insn (insn_size + extra_space); - new_logical_line (current_file, current_line); + if (debug_type == DEBUG_DWARF2 || loc_directive_seen) + dwarf2_gen_line_info (frag_now_fix () - (insn_size + extra_space), + &debug_line); for (slot = 0; slot < vinsn->num_slots; slot++) { - TInsn *tinsn = &vinsn->slots[slot]; + tinsn = &vinsn->slots[slot]; frag_now->tc_frag_data.slot_subtypes[slot] = tinsn->subtype; frag_now->tc_frag_data.slot_symbols[slot] = tinsn->symbol; frag_now->tc_frag_data.slot_offsets[slot] = tinsn->offset; frag_now->tc_frag_data.literal_frags[slot] = tinsn->literal_frag; + if (tinsn->opcode == xtensa_l32r_opcode) + { + frag_now->tc_frag_data.literal_frags[slot] = + tinsn->tok[1].X_add_symbol->sy_frag; + } if (tinsn->literal_space != 0) xg_assemble_literal_space (tinsn->literal_space, slot); + frag_now->tc_frag_data.free_reg[slot] = tinsn->extra_arg; if (tinsn->subtype == RELAX_NARROW) - assert (vinsn->num_slots == 1); + gas_assert (vinsn->num_slots == 1); if (xtensa_opcode_is_jump (isa, tinsn->opcode) == 1) is_jump = TRUE; if (xtensa_opcode_is_branch (isa, tinsn->opcode) == 1) @@ -6810,18 +7236,21 @@ xg_assemble_vliw_tokens (vliw_insn *vinsn) { if (is_jump) { - assert (finish_frag); + gas_assert (finish_frag); frag_var (rs_machine_dependent, - UNREACHABLE_MAX_WIDTH, UNREACHABLE_MAX_WIDTH, + xtensa_fetch_width, xtensa_fetch_width, RELAX_UNREACHABLE, frag_now->fr_symbol, frag_now->fr_offset, NULL); xtensa_set_frag_assembly_state (frag_now); + xtensa_maybe_create_trampoline_frag (); + /* Always create one here. */ + xtensa_maybe_create_literal_pool_frag (TRUE, FALSE); } else if (is_branch && do_align_targets ()) { - assert (finish_frag); + gas_assert (finish_frag); frag_var (rs_machine_dependent, - UNREACHABLE_MAX_WIDTH, UNREACHABLE_MAX_WIDTH, + xtensa_fetch_width, xtensa_fetch_width, RELAX_MAYBE_UNREACHABLE, frag_now->fr_symbol, frag_now->fr_offset, NULL); xtensa_set_frag_assembly_state (frag_now); @@ -6859,6 +7288,7 @@ static void xtensa_cleanup_align_frags (void); static void xtensa_fix_target_frags (void); static void xtensa_mark_narrow_branches (void); static void xtensa_mark_zcl_first_insns (void); +static void xtensa_mark_difference_of_two_symbols (void); static void xtensa_fix_a0_b_retw_frags (void); static void xtensa_fix_b_j_loop_end_frags (void); static void xtensa_fix_close_loop_end_frags (void); @@ -6897,8 +7327,299 @@ xtensa_end (void) xtensa_sanity_check (); xtensa_add_config_info (); + + xtensa_check_frag_count (); +} + + +struct trampoline_frag +{ + struct trampoline_frag *next; + bfd_boolean needs_jump_around; + fragS *fragP; + fixS *fixP; +}; + +struct trampoline_seg +{ + struct trampoline_seg *next; + asection *seg; + struct trampoline_frag trampoline_list; +}; + +static struct trampoline_seg trampoline_seg_list; +#define J_RANGE (128 * 1024) + +static int unreachable_count = 0; + + +static void +xtensa_maybe_create_trampoline_frag (void) +{ + if (!use_trampolines) + return; + + /* We create an area for possible trampolines every 10 unreachable frags. + These are preferred over the ones not preceded by an unreachable frag, + because we don't have to jump around them. This function is called after + each RELAX_UNREACHABLE frag is created. */ + + if (++unreachable_count > 10) + { + xtensa_create_trampoline_frag (FALSE); + clear_frag_count (); + unreachable_count = 0; + } +} + +static void +xtensa_check_frag_count (void) +{ + if (!use_trampolines || frag_now->tc_frag_data.is_no_transform) + return; + + /* We create an area for possible trampolines every 8000 frags or so. This + is an estimate based on the max range of a "j" insn (+/-128K) divided + by a typical frag byte count (16), minus a few for safety. This function + is called after each source line is processed. */ + + if (get_frag_count () > 8000) + { + xtensa_create_trampoline_frag (TRUE); + clear_frag_count (); + unreachable_count = 0; + } + + /* We create an area for a possible literal pool every N (default 5000) + frags or so. */ + xtensa_maybe_create_literal_pool_frag (TRUE, TRUE); +} + +static xtensa_insnbuf trampoline_buf = NULL; +static xtensa_insnbuf trampoline_slotbuf = NULL; + +static xtensa_insnbuf litpool_buf = NULL; +static xtensa_insnbuf litpool_slotbuf = NULL; + +#define TRAMPOLINE_FRAG_SIZE 3000 + +static void +xtensa_create_trampoline_frag (bfd_boolean needs_jump_around) +{ + /* Emit a frag where we can place intermediate jump instructions, + in case we need to jump farther than 128K bytes. + Each jump instruction takes three bytes. + We allocate enough for 1000 trampolines in each frag. + If that's not enough, oh well. */ + + struct trampoline_seg *ts = trampoline_seg_list.next; + struct trampoline_frag *tf; + char *varP; + fragS *fragP; + int size = TRAMPOLINE_FRAG_SIZE; + + for ( ; ts; ts = ts->next) + { + if (ts->seg == now_seg) + break; + } + + if (ts == NULL) + { + ts = XCNEW(struct trampoline_seg); + ts->next = trampoline_seg_list.next; + trampoline_seg_list.next = ts; + ts->seg = now_seg; + } + + frag_wane (frag_now); + frag_new (0); + xtensa_set_frag_assembly_state (frag_now); + varP = frag_var (rs_machine_dependent, size, size, RELAX_TRAMPOLINE, NULL, 0, NULL); + fragP = (fragS *)(varP - SIZEOF_STRUCT_FRAG); + if (trampoline_buf == NULL) + { + trampoline_buf = xtensa_insnbuf_alloc (xtensa_default_isa); + trampoline_slotbuf = xtensa_insnbuf_alloc (xtensa_default_isa); + } + tf = XNEW (struct trampoline_frag); + tf->next = ts->trampoline_list.next; + ts->trampoline_list.next = tf; + tf->needs_jump_around = needs_jump_around; + tf->fragP = fragP; + tf->fixP = NULL; +} + + +static struct trampoline_seg * +find_trampoline_seg (asection *seg) +{ + struct trampoline_seg *ts = trampoline_seg_list.next; + + for ( ; ts; ts = ts->next) + { + if (ts->seg == seg) + return ts; + } + + return NULL; +} + + +void dump_trampolines (void); + +void +dump_trampolines (void) +{ + struct trampoline_seg *ts = trampoline_seg_list.next; + + for ( ; ts; ts = ts->next) + { + asection *seg = ts->seg; + + if (seg == NULL) + continue; + fprintf(stderr, "SECTION %s\n", seg->name); + struct trampoline_frag *tf = ts->trampoline_list.next; + for ( ; tf; tf = tf->next) + { + if (tf->fragP == NULL) + continue; + fprintf(stderr, " 0x%08x: fix=%d, jump_around=%s\n", + (int)tf->fragP->fr_address, (int)tf->fragP->fr_fix, + tf->needs_jump_around ? "T" : "F"); + } + } +} + +static void dump_litpools (void) __attribute__ ((unused)); + +static void +dump_litpools (void) +{ + struct litpool_seg *lps = litpool_seg_list.next; + struct litpool_frag *lpf; + + for ( ; lps ; lps = lps->next ) + { + printf("litpool seg %s\n", lps->seg->name); + for ( lpf = lps->frag_list.next; lpf->fragP; lpf = lpf->next ) + { + fragS *litfrag = lpf->fragP->fr_next; + int count = 0; + while (litfrag && litfrag->fr_subtype != RELAX_LITERAL_POOL_END) + { + if (litfrag->fr_fix == 4) + count++; + litfrag = litfrag->fr_next; + } + printf(" %ld <%d:%d> (%d) [%d]: ", + lpf->addr, lpf->priority, lpf->original_priority, + lpf->fragP->fr_line, count); + //dump_frag(lpf->fragP); + } + } } +static void +xtensa_maybe_create_literal_pool_frag (bfd_boolean create, + bfd_boolean only_if_needed) +{ + struct litpool_seg *lps = litpool_seg_list.next; + fragS *fragP; + struct litpool_frag *lpf; + bfd_boolean needed = FALSE; + + if (use_literal_section || !auto_litpools) + return; + + for ( ; lps ; lps = lps->next ) + { + if (lps->seg == now_seg) + break; + } + + if (lps == NULL) + { + lps = XCNEW (struct litpool_seg); + lps->next = litpool_seg_list.next; + litpool_seg_list.next = lps; + lps->seg = now_seg; + lps->frag_list.next = &lps->frag_list; + lps->frag_list.prev = &lps->frag_list; + } + + lps->frag_count++; + + if (create) + { + if (only_if_needed) + { + if (past_xtensa_end || !use_transform() || + frag_now->tc_frag_data.is_no_transform) + { + return; + } + if (auto_litpool_limit <= 0) + { + /* Don't create a litpool based only on frag count. */ + return; + } + else if (lps->frag_count > auto_litpool_limit) + { + needed = TRUE; + } + else + { + return; + } + } + else + { + needed = TRUE; + } + } + + if (needed) + { + int size = (only_if_needed) ? 3 : 0; /* Space for a "j" insn. */ + /* Create a potential site for a literal pool. */ + frag_wane (frag_now); + frag_new (0); + xtensa_set_frag_assembly_state (frag_now); + fragP = frag_now; + fragP->tc_frag_data.lit_frchain = frchain_now; + fragP->tc_frag_data.literal_frag = fragP; + frag_var (rs_machine_dependent, size, size, + (only_if_needed) ? + RELAX_LITERAL_POOL_CANDIDATE_BEGIN : + RELAX_LITERAL_POOL_BEGIN, + NULL, 0, NULL); + frag_now->tc_frag_data.lit_seg = now_seg; + frag_variant (rs_machine_dependent, 0, 0, + RELAX_LITERAL_POOL_END, NULL, 0, NULL); + xtensa_set_frag_assembly_state (frag_now); + } + else + { + /* RELAX_LITERAL_POOL_BEGIN frag is being created; + just record it here. */ + fragP = frag_now; + } + + lpf = XNEW (struct litpool_frag); + /* Insert at tail of circular list. */ + lpf->addr = 0; + lps->frag_list.prev->next = lpf; + lpf->next = &lps->frag_list; + lpf->prev = lps->frag_list.prev; + lps->frag_list.prev = lpf; + lpf->fragP = fragP; + lpf->priority = (needed) ? (only_if_needed) ? 3 : 2 : 1; + lpf->original_priority = lpf->priority; + + lps->frag_count = 0; +} static void xtensa_cleanup_align_frags (void) @@ -7043,12 +7764,12 @@ static offsetT unrelaxed_frag_max_size (fragS *); static bfd_boolean is_narrow_branch_guaranteed_in_range (fragS *fragP, TInsn *tinsn) { - const expressionS *expr = &tinsn->tok[1]; - symbolS *symbolP = expr->X_add_symbol; - offsetT max_distance = expr->X_add_number; + const expressionS *exp = &tinsn->tok[1]; + symbolS *symbolP = exp->X_add_symbol; + offsetT max_distance = exp->X_add_number; fragS *target_frag; - if (expr->X_op != O_symbol) + if (exp->X_op != O_symbol) return FALSE; target_frag = symbol_get_frag (symbolP); @@ -7089,9 +7810,36 @@ xtensa_mark_zcl_first_insns (void) || fragP->fr_subtype == RELAX_CHECK_ALIGN_NEXT_OPCODE)) { /* Find the loop frag. */ - fragS *targ_frag = next_non_empty_frag (fragP); + fragS *loop_frag = next_non_empty_frag (fragP); /* Find the first insn frag. */ - targ_frag = next_non_empty_frag (targ_frag); + fragS *targ_frag = next_non_empty_frag (loop_frag); + + /* Handle a corner case that comes up in hardware + diagnostics. The original assembly looks like this: + + loop aX, LabelA + --not found by next_non_empty_frag + loop aY, LabelB + + Depending on the start address, the assembler may or + may not change it to look something like this: + + loop aX, LabelA + nop--frag isn't empty anymore + loop aY, LabelB + + So set up to check the alignment of the nop if it + exists */ + while (loop_frag != targ_frag) + { + if (loop_frag->fr_type == rs_machine_dependent + && (loop_frag->fr_subtype == RELAX_ALIGN_NEXT_OPCODE + || loop_frag->fr_subtype + == RELAX_CHECK_ALIGN_NEXT_OPCODE)) + targ_frag = loop_frag; + else + loop_frag = loop_frag->fr_next; + } /* Of course, sometimes (mostly for toy test cases) a zero-cost loop instruction is the last in a section. */ @@ -7122,6 +7870,64 @@ xtensa_mark_zcl_first_insns (void) } +/* When a difference-of-symbols expression is encoded as a uleb128 or + sleb128 value, the linker is unable to adjust that value to account for + link-time relaxation. Mark all the code between such symbols so that + its size cannot be changed by linker relaxation. */ + +static void +xtensa_mark_difference_of_two_symbols (void) +{ + symbolS *expr_sym; + + for (expr_sym = expr_symbols; expr_sym; + expr_sym = symbol_get_tc (expr_sym)->next_expr_symbol) + { + expressionS *exp = symbol_get_value_expression (expr_sym); + + if (exp->X_op == O_subtract) + { + symbolS *left = exp->X_add_symbol; + symbolS *right = exp->X_op_symbol; + + /* Difference of two symbols not in the same section + are handled with relocations in the linker. */ + if (S_GET_SEGMENT (left) == S_GET_SEGMENT (right)) + { + fragS *start; + fragS *end; + fragS *walk; + + if (symbol_get_frag (left)->fr_address + <= symbol_get_frag (right)->fr_address) + { + start = symbol_get_frag (left); + end = symbol_get_frag (right); + } + else + { + start = symbol_get_frag (right); + end = symbol_get_frag (left); + } + + if (start->tc_frag_data.no_transform_end != NULL) + walk = start->tc_frag_data.no_transform_end; + else + walk = start; + do + { + walk->tc_frag_data.is_no_transform = 1; + walk = walk->fr_next; + } + while (walk && walk->fr_address < end->fr_address); + + start->tc_frag_data.no_transform_end = walk; + } + } + } +} + + /* Re-process all of the fragments looking to convert all of the RELAX_ADD_NOP_IF_A0_B_RETW. If the next instruction is a conditional branch or a retw/retw.n, convert this frag to one that @@ -7369,7 +8175,7 @@ xtensa_fix_close_loop_end_frags (void) } frag_wane (fragP); } - assert (fragP->fr_type != rs_machine_dependent + gas_assert (fragP->fr_type != rs_machine_dependent || fragP->fr_subtype != RELAX_ADD_NOP_IF_CLOSE_LOOP_END); } } @@ -7445,7 +8251,7 @@ unrelaxed_frag_max_size (fragS *fragP) break; default: /* We had darn well better know how big it is. */ - assert (0); + gas_assert (0); break; } @@ -7484,7 +8290,6 @@ xtensa_fix_short_loop_frags (void) for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next) { fragS *fragP; - fragS *current_target = NULL; xtensa_opcode current_opcode = XTENSA_UNDEFINED; /* Walk over all of the fragments in a subsection. */ @@ -7497,9 +8302,8 @@ xtensa_fix_short_loop_frags (void) TInsn t_insn; fragS *loop_frag = next_non_empty_frag (fragP); tinsn_from_chars (&t_insn, loop_frag->fr_opcode, 0); - current_target = symbol_get_frag (fragP->fr_symbol); current_opcode = t_insn.opcode; - assert (xtensa_opcode_is_loop (xtensa_default_isa, + gas_assert (xtensa_opcode_is_loop (xtensa_default_isa, current_opcode) == 1); } @@ -7661,12 +8465,12 @@ static bfd_boolean is_local_forward_loop (const TInsn *, fragS *); static void xtensa_sanity_check (void) { - char *file_name; + const char *file_name; unsigned line; frchainS *frchP; asection *s; - as_where (&file_name, &line); + file_name = as_where (&line); for (s = stdoutput->sections; s; s = s->next) for (frchP = seg_info (s)->frchainP; frchP; frchP = frchP->frch_next) { @@ -7676,7 +8480,7 @@ xtensa_sanity_check (void) for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) { if (fragP->fr_type == rs_machine_dependent - && fragP->fr_subtype == RELAX_SLOTS + && fragP->fr_subtype == RELAX_SLOTS && fragP->tc_frag_data.slot_subtypes[0] == RELAX_IMMED) { static xtensa_insnbuf insnbuf = NULL; @@ -7719,7 +8523,7 @@ xtensa_sanity_check (void) static bfd_boolean is_empty_loop (const TInsn *insn, fragS *fragP) { - const expressionS *expr; + const expressionS *exp; symbolS *symbolP; fragS *next_fragP; @@ -7732,12 +8536,12 @@ is_empty_loop (const TInsn *insn, fragS *fragP) if (insn->ntok <= LOOP_IMMED_OPN) return FALSE; - expr = &insn->tok[LOOP_IMMED_OPN]; + exp = &insn->tok[LOOP_IMMED_OPN]; - if (expr->X_op != O_symbol) + if (exp->X_op != O_symbol) return FALSE; - symbolP = expr->X_add_symbol; + symbolP = exp->X_add_symbol; if (!symbolP) return FALSE; @@ -7766,7 +8570,7 @@ is_empty_loop (const TInsn *insn, fragS *fragP) static bfd_boolean is_local_forward_loop (const TInsn *insn, fragS *fragP) { - const expressionS *expr; + const expressionS *exp; symbolS *symbolP; fragS *next_fragP; @@ -7779,12 +8583,12 @@ is_local_forward_loop (const TInsn *insn, fragS *fragP) if (insn->ntok <= LOOP_IMMED_OPN) return FALSE; - expr = &insn->tok[LOOP_IMMED_OPN]; + exp = &insn->tok[LOOP_IMMED_OPN]; - if (expr->X_op != O_symbol) + if (exp->X_op != O_symbol) return FALSE; - symbolP = expr->X_add_symbol; + symbolP = exp->X_add_symbol; if (!symbolP) return FALSE; @@ -7820,7 +8624,7 @@ xtensa_add_config_info (void) info_sec = subseg_new (".xtensa.info", 0); bfd_set_section_flags (stdoutput, info_sec, SEC_HAS_CONTENTS | SEC_READONLY); - data = xmalloc (100); + data = XNEWVEC (char, 100); sprintf (data, "USE_ABSOLUTE_LITERALS=%d\nABI=%d\n", XSHAL_USE_ABSOLUTE_LITERALS, XSHAL_ABI); sz = strlen (data) + 1; @@ -7862,8 +8666,33 @@ get_text_align_power (unsigned target_size) { if (target_size <= 4) return 2; - assert (target_size == 8); - return 3; + + if (target_size <= 8) + return 3; + + if (target_size <= 16) + return 4; + + if (target_size <= 32) + return 5; + + if (target_size <= 64) + return 6; + + if (target_size <= 128) + return 7; + + if (target_size <= 256) + return 8; + + if (target_size <= 512) + return 9; + + if (target_size <= 1024) + return 10; + + gas_assert (0); + return 0; } @@ -7898,7 +8727,7 @@ get_text_align_fill_size (addressT address, bfd_boolean skip_one = FALSE; alignment = (1 << align_pow); - assert (target_size > 0 && alignment >= (addressT) target_size); + gas_assert (target_size > 0 && alignment >= (addressT) target_size); if (!use_nops) { @@ -7928,7 +8757,7 @@ get_text_align_fill_size (addressT address, == (address + fill + target_size - 1) >> align_pow) return fill; } - assert (0); + gas_assert (0); return 0; } @@ -7936,19 +8765,17 @@ get_text_align_fill_size (addressT address, static int branch_align_power (segT sec) { - /* If the Xtensa processor has a fetch width of 8 bytes, and the section - is aligned to at least an 8-byte boundary, then a branch target need - only fit within an 8-byte aligned block of memory to avoid a stall. - Otherwise, try to fit branch targets within 4-byte aligned blocks - (which may be insufficient, e.g., if the section has no alignment, but - it's good enough). */ - if (xtensa_fetch_width == 8) - { - if (get_recorded_alignment (sec) >= 3) - return 3; - } - else - assert (xtensa_fetch_width == 4); + /* If the Xtensa processor has a fetch width of X, and + the section is aligned to at least that boundary, then a branch + target need only fit within that aligned block of memory to avoid + a stall. Otherwise, try to fit branch targets within 4-byte + aligned blocks (which may be insufficient, e.g., if the section + has no alignment, but it's good enough). */ + int fetch_align = get_text_align_power(xtensa_fetch_width); + int sec_align = get_recorded_alignment (sec); + + if (sec_align >= fetch_align) + return fetch_align; return 2; } @@ -7963,11 +8790,11 @@ get_text_align_nop_count (offsetT fill_size, bfd_boolean use_no_density) if (use_no_density) { - assert (fill_size % 3 == 0); + gas_assert (fill_size % 3 == 0); return (fill_size / 3); } - assert (fill_size != 1); /* Bad argument. */ + gas_assert (fill_size != 1); /* Bad argument. */ while (fill_size > 1) { @@ -7977,7 +8804,7 @@ get_text_align_nop_count (offsetT fill_size, bfd_boolean use_no_density) fill_size -= insn_size; count++; } - assert (fill_size != 1); /* Bad algorithm. */ + gas_assert (fill_size != 1); /* Bad algorithm. */ return count; } @@ -7992,7 +8819,7 @@ get_text_align_nth_nop_size (offsetT fill_size, if (use_no_density) return 3; - assert (fill_size != 1); /* Bad argument. */ + gas_assert (fill_size != 1); /* Bad argument. */ while (fill_size > 1) { @@ -8004,7 +8831,7 @@ get_text_align_nth_nop_size (offsetT fill_size, if (n + 1 == count) return insn_size; } - assert (0); + gas_assert (0); return 0; } @@ -8038,8 +8865,8 @@ get_noop_aligned_address (fragS *fragP, addressT address) xtensa_opcode opcode; bfd_boolean is_loop; - assert (fragP->fr_type == rs_machine_dependent); - assert (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE); + gas_assert (fragP->fr_type == rs_machine_dependent); + gas_assert (fragP->fr_subtype == RELAX_ALIGN_NEXT_OPCODE); /* Find the loop frag. */ first_insn = next_non_empty_frag (fragP); @@ -8047,7 +8874,7 @@ get_noop_aligned_address (fragS *fragP, addressT address) first_insn = next_non_empty_frag (first_insn); is_loop = next_frag_opcode_is_loop (fragP, &opcode); - assert (is_loop); + gas_assert (is_loop); loop_insn_size = xg_get_single_size (opcode); pre_opcode_bytes = next_frag_pre_opcode_bytes (fragP); @@ -8100,8 +8927,9 @@ get_aligned_diff (fragS *fragP, addressT address, offsetT *max_diff) int align_power; offsetT opt_diff; offsetT branch_align; + fragS *loop_frag; - assert (fragP->fr_type == rs_machine_dependent); + gas_assert (fragP->fr_type == rs_machine_dependent); switch (fragP->fr_subtype) { case RELAX_DESIRE_ALIGN: @@ -8118,19 +8946,23 @@ get_aligned_diff (fragS *fragP, addressT address, offsetT *max_diff) *max_diff = (opt_diff + branch_align - (target_size + ((address + opt_diff) % branch_align))); - assert (*max_diff >= opt_diff); + gas_assert (*max_diff >= opt_diff); return opt_diff; case RELAX_ALIGN_NEXT_OPCODE: - target_size = get_loop_align_size (next_frag_format_size (fragP)); + /* The next non-empty frag after this one holds the LOOP instruction + that needs to be aligned. The required alignment depends on the + size of the next non-empty frag after the loop frag, i.e., the + first instruction in the loop. */ + loop_frag = next_non_empty_frag (fragP); + target_size = get_loop_align_size (next_frag_format_size (loop_frag)); loop_insn_offset = 0; is_loop = next_frag_opcode_is_loop (fragP, &loop_opcode); - assert (is_loop); + gas_assert (is_loop); /* If the loop has been expanded then the LOOP instruction could be at an offset from this fragment. */ - if (next_non_empty_frag(fragP)->tc_frag_data.slot_subtypes[0] - != RELAX_IMMED) + if (loop_frag->tc_frag_data.slot_subtypes[0] != RELAX_IMMED) loop_insn_offset = get_expanded_loop_offset (loop_opcode); /* In an ideal world, which is what we are shooting for here, @@ -8139,20 +8971,20 @@ get_aligned_diff (fragS *fragP, addressT address, offsetT *max_diff) will call get_noop_aligned_address. */ target_address = address + loop_insn_offset + xg_get_single_size (loop_opcode); - align_power = get_text_align_power (target_size), + align_power = get_text_align_power (target_size); opt_diff = get_text_align_fill_size (target_address, align_power, target_size, FALSE, FALSE); *max_diff = xtensa_fetch_width - ((target_address + opt_diff) % xtensa_fetch_width) - target_size + opt_diff; - assert (*max_diff >= opt_diff); + gas_assert (*max_diff >= opt_diff); return opt_diff; default: break; } - assert (0); + gas_assert (0); return 0; } @@ -8164,6 +8996,153 @@ static long relax_frag_for_align (fragS *, long); static long relax_frag_immed (segT, fragS *, long, int, xtensa_format, int, int *, bfd_boolean); +typedef struct cached_fixup cached_fixupS; +struct cached_fixup +{ + int addr; + int target; + int delta; + fixS *fixP; +}; + +typedef struct fixup_cache fixup_cacheS; +struct fixup_cache +{ + cached_fixupS *fixups; + unsigned n_fixups; + unsigned n_max; + + segT seg; + fragS *first_frag; +}; + +static int fixup_order (const void *a, const void *b) +{ + const cached_fixupS *pa = a; + const cached_fixupS *pb = b; + + if (pa->addr == pb->addr) + { + if (pa->target == pb->target) + { + if (pa->fixP->fx_r_type == pb->fixP->fx_r_type) + return 0; + return pa->fixP->fx_r_type < pb->fixP->fx_r_type ? -1 : 1; + } + return pa->target - pb->target; + } + return pa->addr - pb->addr; +} + +static bfd_boolean xtensa_make_cached_fixup (cached_fixupS *o, fixS *fixP) +{ + xtensa_isa isa = xtensa_default_isa; + int addr = fixP->fx_frag->fr_address; + int target; + int delta; + symbolS *s = fixP->fx_addsy; + int slot; + xtensa_format fmt; + xtensa_opcode opcode; + + if (fixP->fx_r_type < BFD_RELOC_XTENSA_SLOT0_OP || + fixP->fx_r_type > BFD_RELOC_XTENSA_SLOT14_OP) + return FALSE; + target = S_GET_VALUE (s); + delta = target - addr; + + if (abs(delta) < J_RANGE / 2) + return FALSE; + + xtensa_insnbuf_from_chars (isa, trampoline_buf, + (unsigned char *) fixP->fx_frag->fr_literal + + fixP->fx_where, 0); + fmt = xtensa_format_decode (isa, trampoline_buf); + gas_assert (fmt != XTENSA_UNDEFINED); + slot = fixP->tc_fix_data.slot; + xtensa_format_get_slot (isa, fmt, slot, trampoline_buf, trampoline_slotbuf); + opcode = xtensa_opcode_decode (isa, fmt, slot, trampoline_slotbuf); + if (opcode != xtensa_j_opcode) + return FALSE; + + o->addr = addr; + o->target = target; + o->delta = delta; + o->fixP = fixP; + + return TRUE; +} + +static void xtensa_realloc_fixup_cache (fixup_cacheS *cache, unsigned add) +{ + if (cache->n_fixups + add > cache->n_max) + { + cache->n_max = (cache->n_fixups + add) * 2; + cache->fixups = XRESIZEVEC (cached_fixupS, cache->fixups, cache->n_max); + } +} + +static void xtensa_cache_relaxable_fixups (fixup_cacheS *cache, + segment_info_type *seginfo) +{ + fixS *fixP; + + cache->n_fixups = 0; + + for (fixP = seginfo->fix_root; fixP ; fixP = fixP->fx_next) + { + xtensa_realloc_fixup_cache (cache, 1); + + if (xtensa_make_cached_fixup (cache->fixups + cache->n_fixups, fixP)) + ++cache->n_fixups; + } + qsort (cache->fixups, cache->n_fixups, sizeof (*cache->fixups), fixup_order); +} + +static unsigned xtensa_find_first_cached_fixup (const fixup_cacheS *cache, + int addr) +{ + unsigned a = 0; + unsigned b = cache->n_fixups; + + while (b - a > 1) + { + unsigned c = (a + b) / 2; + + if (cache->fixups[c].addr < addr) + a = c; + else + b = c; + } + return a; +} + +static void xtensa_delete_cached_fixup (fixup_cacheS *cache, unsigned i) +{ + memmove (cache->fixups + i, cache->fixups + i + 1, + (cache->n_fixups - i - 1) * sizeof (*cache->fixups)); + --cache->n_fixups; +} + +static bfd_boolean xtensa_add_cached_fixup (fixup_cacheS *cache, fixS *fixP) +{ + cached_fixupS o; + unsigned i; + + if (!xtensa_make_cached_fixup (&o, fixP)) + return FALSE; + xtensa_realloc_fixup_cache (cache, 1); + i = xtensa_find_first_cached_fixup (cache, o.addr); + if (i < cache->n_fixups) + { + ++i; + memmove (cache->fixups + i + 1, cache->fixups + i, + (cache->n_fixups - i) * sizeof (*cache->fixups)); + } + cache->fixups[i] = o; + ++cache->n_fixups; + return TRUE; +} /* Return the number of bytes added to this fragment, given that the input has been stretched already by "stretch". */ @@ -8174,14 +9153,14 @@ xtensa_relax_frag (fragS *fragP, long stretch, int *stretched_p) xtensa_isa isa = xtensa_default_isa; int unreported = fragP->tc_frag_data.unreported_expansion; long new_stretch = 0; - char *file_name; + const char *file_name; unsigned line; int lit_size; static xtensa_insnbuf vbuf = NULL; int slot, num_slots; xtensa_format fmt; - as_where (&file_name, &line); + file_name = as_where (&line); new_logical_line (fragP->fr_file, fragP->fr_line); fragP->tc_frag_data.unreported_expansion = 0; @@ -8216,7 +9195,7 @@ xtensa_relax_frag (fragS *fragP, long stretch, int *stretched_p) case RELAX_LITERAL_NR: lit_size = 4; fragP->fr_subtype = RELAX_LITERAL_FINAL; - assert (unreported == lit_size); + gas_assert (unreported == lit_size); memset (&fragP->fr_literal[fragP->fr_fix], 0, 4); fragP->fr_var -= lit_size; fragP->fr_fix += lit_size; @@ -8244,6 +9223,7 @@ xtensa_relax_frag (fragS *fragP, long stretch, int *stretched_p) case RELAX_IMMED: case RELAX_IMMED_STEP1: case RELAX_IMMED_STEP2: + case RELAX_IMMED_STEP3: /* Place the immediate. */ new_stretch += relax_frag_immed (now_seg, fragP, stretch, @@ -8259,7 +9239,41 @@ xtensa_relax_frag (fragS *fragP, long stretch, int *stretched_p) break; case RELAX_LITERAL_POOL_BEGIN: + if (fragP->fr_var != 0) + { + /* We have a converted "candidate" literal pool; + assemble a jump around it. */ + TInsn insn; + if (!litpool_slotbuf) + { + litpool_buf = xtensa_insnbuf_alloc (isa); + litpool_slotbuf = xtensa_insnbuf_alloc (isa); + } + new_stretch += 3; + fragP->tc_frag_data.relax_seen = FALSE; /* Need another pass. */ + fragP->tc_frag_data.is_insn = TRUE; + tinsn_init (&insn); + insn.insn_type = ITYPE_INSN; + insn.opcode = xtensa_j_opcode; + insn.ntok = 1; + set_expr_symbol_offset (&insn.tok[0], fragP->fr_symbol, + fragP->fr_fix); + fmt = xg_get_single_format (xtensa_j_opcode); + tinsn_to_slotbuf (fmt, 0, &insn, litpool_slotbuf); + xtensa_format_set_slot (isa, fmt, 0, litpool_buf, litpool_slotbuf); + xtensa_insnbuf_to_chars (isa, litpool_buf, + (unsigned char *)fragP->fr_literal + + fragP->fr_fix, 3); + fragP->fr_fix += 3; + fragP->fr_var -= 3; + /* Add a fix-up. */ + fix_new (fragP, 0, 3, fragP->fr_symbol, 0, TRUE, + BFD_RELOC_XTENSA_SLOT0_OP); + } + break; + case RELAX_LITERAL_POOL_END: + case RELAX_LITERAL_POOL_CANDIDATE_BEGIN: case RELAX_MAYBE_UNREACHABLE: case RELAX_MAYBE_DESIRE_ALIGN: /* No relaxation required. */ @@ -8271,6 +9285,167 @@ xtensa_relax_frag (fragS *fragP, long stretch, int *stretched_p) new_stretch += relax_frag_for_align (fragP, stretch); break; + case RELAX_TRAMPOLINE: + if (fragP->tc_frag_data.relax_seen) + { + static fixup_cacheS fixup_cache; + segment_info_type *seginfo = seg_info (now_seg); + int trampaddr = fragP->fr_address + fragP->fr_fix; + int searchaddr = trampaddr < J_RANGE ? 0 : trampaddr - J_RANGE; + unsigned i; + + if (now_seg != fixup_cache.seg || + fragP == fixup_cache.first_frag || + fixup_cache.first_frag == NULL) + { + xtensa_cache_relaxable_fixups (&fixup_cache, seginfo); + fixup_cache.seg = now_seg; + fixup_cache.first_frag = fragP; + } + + /* Scan for jumps that will not reach. */ + for (i = xtensa_find_first_cached_fixup (&fixup_cache, searchaddr); + i < fixup_cache.n_fixups; ++i) + + { + fixS *fixP = fixup_cache.fixups[i].fixP; + int target = fixup_cache.fixups[i].target; + int addr = fixup_cache.fixups[i].addr; + int delta = fixup_cache.fixups[i].delta + stretch; + + trampaddr = fragP->fr_address + fragP->fr_fix; + + if (addr + J_RANGE < trampaddr) + continue; + if (addr > trampaddr + J_RANGE) + break; + if (abs (delta) < J_RANGE) + continue; + + slot = fixP->tc_fix_data.slot; + + if (delta > J_RANGE || delta < -1 * J_RANGE) + { /* Found an out-of-range jump; scan the list of trampolines for the best match. */ + struct trampoline_seg *ts = find_trampoline_seg (now_seg); + struct trampoline_frag *tf = ts->trampoline_list.next; + struct trampoline_frag *prev = &ts->trampoline_list; + int lower = (target < addr) ? target : addr; + int upper = (target > addr) ? target : addr; + int midpoint = lower + (upper - lower) / 2; + + if ((upper - lower) > 2 * J_RANGE) + { + /* One trampoline won't suffice; we need multiple jumps. + Jump to the trampoline that's farthest, but still in + range relative to the original "j" instruction. */ + for ( ; tf; prev = tf, tf = tf->next ) + { + int this_addr = tf->fragP->fr_address + tf->fragP->fr_fix; + int next_addr = (tf->next) ? tf->next->fragP->fr_address + tf->next->fragP->fr_fix : 0 ; + + if (addr == lower) + { + /* Forward jump. */ + if (this_addr - addr < J_RANGE) + break; + } + else + { + /* Backward jump. */ + if (next_addr == 0 || addr - next_addr > J_RANGE) + break; + } + } + } + else + { + struct trampoline_frag *best_tf = NULL; + int best_delta = 0; + + for ( ; tf; prev = tf, tf = tf->next ) + { + int this_addr = tf->fragP->fr_address + tf->fragP->fr_fix; + int this_delta = abs (this_addr - midpoint); + + if (!best_tf || this_delta < best_delta) + { + best_tf = tf; + best_delta = this_delta; + } + } + tf = best_tf; + } + if (tf->fragP == fragP) + { + if (abs (addr - trampaddr) < J_RANGE) + { /* The trampoline is in range of original; fix it! */ + fixS *newfixP; + int offset; + TInsn insn; + symbolS *lsym; + fragS *fP; /* The out-of-range jump. */ + + new_stretch += init_trampoline_frag (tf); + offset = fragP->fr_fix; /* Where to assemble the j insn. */ + lsym = fragP->fr_symbol; + fP = fixP->fx_frag; + /* Assemble a jump to the target label here. */ + tinsn_init (&insn); + insn.insn_type = ITYPE_INSN; + insn.opcode = xtensa_j_opcode; + insn.ntok = 1; + set_expr_symbol_offset (&insn.tok[0], lsym, offset); + fmt = xg_get_single_format (xtensa_j_opcode); + tinsn_to_slotbuf (fmt, 0, &insn, trampoline_slotbuf); + xtensa_format_set_slot (isa, fmt, 0, trampoline_buf, trampoline_slotbuf); + xtensa_insnbuf_to_chars (isa, trampoline_buf, (unsigned char *)fragP->fr_literal + offset, 3); + fragP->fr_fix += 3; + fragP->fr_var -= 3; + /* Add a fix-up for the original j insn. */ + newfixP = fix_new (fP, fixP->fx_where, fixP->fx_size, lsym, fragP->fr_fix - 3, TRUE, fixP->fx_r_type); + newfixP->fx_no_overflow = 1; + newfixP->tc_fix_data.X_add_symbol = lsym; + newfixP->tc_fix_data.X_add_number = offset; + newfixP->tc_fix_data.slot = slot; + + xtensa_delete_cached_fixup (&fixup_cache, i); + xtensa_add_cached_fixup (&fixup_cache, newfixP); + + /* Move the fix-up from the original j insn to this one. */ + fixP->fx_frag = fragP; + fixP->fx_where = fragP->fr_fix - 3; + fixP->tc_fix_data.slot = 0; + + xtensa_add_cached_fixup (&fixup_cache, fixP); + + /* re-do current fixup */ + --i; + + /* Adjust the jump around this trampoline (if present). */ + if (tf->fixP != NULL) + { + tf->fixP->fx_offset += 3; + } + new_stretch += 3; + fragP->tc_frag_data.relax_seen = FALSE; /* Need another pass. */ + /* Do we have room for more? */ + if (fragP->fr_var < 3) + { /* No, convert to fill. */ + frag_wane (fragP); + fragP->fr_subtype = 0; + /* Remove from the trampoline_list. */ + prev->next = tf->next; + if (fragP == fixup_cache.first_frag) + fixup_cache.first_frag = NULL; + break; + } + } + } + } + } + } + break; + default: as_bad (_("bad relaxation state")); } @@ -8353,7 +9528,7 @@ relax_frag_for_align (fragS *fragP, long stretch) long stretch_me; long diff; - assert (fragP->fr_subtype == RELAX_FILL_NOP + gas_assert (fragP->fr_subtype == RELAX_FILL_NOP || fragP->fr_subtype == RELAX_UNREACHABLE || (fragP->fr_subtype == RELAX_SLOTS && fragP->tc_frag_data.slot_subtypes[0] == RELAX_NARROW)); @@ -8440,7 +9615,7 @@ find_address_of_next_align_frag (fragS **fragPP, (*widens)++; break; } - address += total_frag_text_expansion (fragP);; + address += total_frag_text_expansion (fragP); break; case RELAX_IMMED: @@ -8509,8 +9684,8 @@ future_alignment_required (fragS *fragP, long stretch ATTRIBUTE_UNUSED) { local_opt_diff = get_aligned_diff (fragP, address, &max_diff); opt_diff = local_opt_diff; - assert (opt_diff >= 0); - assert (max_diff >= opt_diff); + gas_assert (opt_diff >= 0); + gas_assert (max_diff >= opt_diff); if (max_diff == 0) return 0; @@ -8568,7 +9743,7 @@ future_alignment_required (fragS *fragP, long stretch ATTRIBUTE_UNUSED) { if (this_frag->fr_subtype == RELAX_UNREACHABLE) { - assert (opt_diff <= UNREACHABLE_MAX_WIDTH); + gas_assert (opt_diff <= (signed) xtensa_fetch_width); return opt_diff; } return 0; @@ -8590,13 +9765,13 @@ future_alignment_required (fragS *fragP, long stretch ATTRIBUTE_UNUSED) if (this_frag->fr_subtype == RELAX_SLOTS && this_frag->tc_frag_data.slot_subtypes[0] == RELAX_NARROW) - assert (stretch_amount <= 1); + gas_assert (stretch_amount <= 1); else if (this_frag->fr_subtype == RELAX_FILL_NOP) { if (this_frag->tc_frag_data.is_no_density) - assert (stretch_amount == 3 || stretch_amount == 0); + gas_assert (stretch_amount == 3 || stretch_amount == 0); else - assert (stretch_amount <= 3); + gas_assert (stretch_amount <= 3); } } return stretch_amount; @@ -8606,39 +9781,11 @@ future_alignment_required (fragS *fragP, long stretch ATTRIBUTE_UNUSED) /* The idea: widen everything you can to get a target or loop aligned, then start using NOPs. - When we must have a NOP, here is a table of how we decide - (so you don't have to fight through the control flow below): - wide_nops = the number of wide NOPs available for aligning narrow_nops = the number of narrow NOPs available for aligning (a subset of wide_nops) widens = the number of narrow instructions that should be widened - Desired wide narrow - Diff nop nop widens - 1 0 0 1 - 2 0 1 0 - 3a 1 0 0 - b 0 1 1 (case 3a makes this case unnecessary) - 4a 1 0 1 - b 0 2 0 - c 0 1 2 (case 4a makes this case unnecessary) - 5a 1 0 2 - b 1 1 0 - c 0 2 1 (case 5b makes this case unnecessary) - 6a 2 0 0 - b 1 0 3 - c 0 1 4 (case 6b makes this case unnecessary) - d 1 1 1 (case 6a makes this case unnecessary) - e 0 2 2 (case 6a makes this case unnecessary) - f 0 3 0 (case 6a makes this case unnecessary) - 7a 1 0 4 - b 2 0 1 - c 1 1 2 (case 7b makes this case unnecessary) - d 0 1 5 (case 7a makes this case unnecessary) - e 0 2 3 (case 7b makes this case unnecessary) - f 0 3 1 (case 7b makes this case unnecessary) - g 1 2 1 (case 7b makes this case unnecessary) */ static long @@ -8648,13 +9795,17 @@ bytes_to_stretch (fragS *this_frag, int num_widens, int desired_diff) { + int nops_needed; + int nop_bytes; + int extra_bytes; int bytes_short = desired_diff - num_widens; - assert (desired_diff >= 0 && desired_diff < 8); + gas_assert (desired_diff >= 0 + && desired_diff < (signed) xtensa_fetch_width); if (desired_diff == 0) return 0; - assert (wide_nops > 0 || num_widens > 0); + gas_assert (wide_nops > 0 || num_widens > 0); /* Always prefer widening to NOP-filling. */ if (bytes_short < 0) @@ -8677,101 +9828,253 @@ bytes_to_stretch (fragS *this_frag, /* From here we will need at least one NOP to get an alignment. However, we may not be able to align at all, in which case, don't widen. */ - if (this_frag->fr_subtype == RELAX_FILL_NOP) + nops_needed = desired_diff / 3; + + /* If there aren't enough nops, don't widen. */ + if (nops_needed > wide_nops) + return 0; + + /* First try it with all wide nops. */ + nop_bytes = nops_needed * 3; + extra_bytes = desired_diff - nop_bytes; + + if (nop_bytes + num_widens >= desired_diff) + { + if (this_frag->fr_subtype == RELAX_FILL_NOP) + return 3; + else if (num_widens == extra_bytes) + return 1; + return 0; + } + + /* Add a narrow nop. */ + nops_needed++; + nop_bytes += 2; + extra_bytes -= 2; + if (narrow_nops == 0 || nops_needed > wide_nops) + return 0; + + if (nop_bytes + num_widens >= desired_diff && extra_bytes >= 0) { - switch (desired_diff) + if (this_frag->fr_subtype == RELAX_FILL_NOP) + return !this_frag->tc_frag_data.is_no_density ? 2 : 3; + else if (num_widens == extra_bytes) + return 1; + return 0; + } + + /* Replace a wide nop with a narrow nop--we can get here if + extra_bytes was negative in the previous conditional. */ + if (narrow_nops == 1) + return 0; + nop_bytes--; + extra_bytes++; + if (nop_bytes + num_widens >= desired_diff) + { + if (this_frag->fr_subtype == RELAX_FILL_NOP) + return !this_frag->tc_frag_data.is_no_density ? 2 : 3; + else if (num_widens == extra_bytes) + return 1; + return 0; + } + + /* If we can't satisfy any of the above cases, then we can't align + using padding or fill nops. */ + return 0; +} + + +static struct trampoline_frag * +search_trampolines (TInsn *tinsn, fragS *fragP, bfd_boolean unreachable_only) +{ + struct trampoline_seg *ts = find_trampoline_seg (now_seg); + struct trampoline_frag *tf = (ts) ? ts->trampoline_list.next : NULL; + struct trampoline_frag *best_tf = NULL; + int best_delta = 0; + int best_addr = 0; + symbolS *sym = tinsn->tok[0].X_add_symbol; + offsetT target = S_GET_VALUE (sym) + tinsn->tok[0].X_add_number; + offsetT addr = fragP->fr_address; + offsetT lower = (addr < target) ? addr : target; + offsetT upper = (addr > target) ? addr : target; + int delta = upper - lower; + offsetT midpoint = lower + delta / 2; + int this_delta = -1; + int this_addr = -1; + + if (delta > 2 * J_RANGE) + { + /* One trampoline won't do; we need multiple. + Choose the farthest trampoline that's still in range of the original + and let a later pass finish the job. */ + for ( ; tf; tf = tf->next) { - case 1: - return 0; - case 2: - if (!this_frag->tc_frag_data.is_no_density && narrow_nops == 1) - return 2; /* case 2 */ - return 0; - case 3: - if (wide_nops > 1) - return 0; - else - return 3; /* case 3a */ - case 4: - if (num_widens >= 1 && wide_nops == 1) - return 3; /* case 4a */ - if (!this_frag->tc_frag_data.is_no_density && narrow_nops == 2) - return 2; /* case 4b */ - return 0; - case 5: - if (num_widens >= 2 && wide_nops == 1) - return 3; /* case 5a */ - /* We will need two nops. Are there enough nops - between here and the align target? */ - if (wide_nops < 2 || narrow_nops == 0) - return 0; - /* Are there other nops closer that can serve instead? */ - if (wide_nops > 2 && narrow_nops > 1) - return 0; - /* Take the density one first, because there might not be - another density one available. */ - if (!this_frag->tc_frag_data.is_no_density) - return 2; /* case 5b narrow */ + int next_addr = (tf->next) ? tf->next->fragP->fr_address + tf->next->fragP->fr_fix : 0; + + this_addr = tf->fragP->fr_address + tf->fragP->fr_fix; + if (lower == addr) + { + /* Forward jump. */ + if (this_addr - addr < J_RANGE) + break; + } else - return 3; /* case 5b wide */ - return 0; - case 6: - if (wide_nops == 2) - return 3; /* case 6a */ - else if (num_widens >= 3 && wide_nops == 1) - return 3; /* case 6b */ - return 0; - case 7: - if (wide_nops == 1 && num_widens >= 4) - return 3; /* case 7a */ - else if (wide_nops == 2 && num_widens >= 1) - return 3; /* case 7b */ - return 0; - default: - assert (0); + { + /* Backward jump. */ + if (next_addr == 0 || addr - next_addr > J_RANGE) + break; + } } + if (abs (addr - this_addr) < J_RANGE) + return tf; + + return NULL; } - else + for ( ; tf; tf = tf->next) { - /* We will need a NOP no matter what, but should we widen - this instruction to help? + this_addr = tf->fragP->fr_address + tf->fragP->fr_fix; + this_delta = abs (this_addr - midpoint); + if (unreachable_only && tf->needs_jump_around) + continue; + if (!best_tf || this_delta < best_delta) + { + best_tf = tf; + best_delta = this_delta; + best_addr = this_addr; + } + } + + if (best_tf && + best_delta < J_RANGE && + abs(best_addr - lower) < J_RANGE && + abs(best_addr - upper) < J_RANGE) + return best_tf; + + return NULL; /* No suitable trampoline found. */ +} + + +static struct trampoline_frag * +get_best_trampoline (TInsn *tinsn, fragS *fragP) +{ + struct trampoline_frag *tf = NULL; + + tf = search_trampolines (tinsn, fragP, TRUE); /* Try unreachable first. */ + + if (tf == NULL) + tf = search_trampolines (tinsn, fragP, FALSE); /* Try ones needing a jump-around, too. */ - This is a RELAX_NARROW frag. */ - switch (desired_diff) + return tf; +} + + +static void +check_and_update_trampolines (void) +{ + struct trampoline_seg *ts = find_trampoline_seg (now_seg); + struct trampoline_frag *tf = ts->trampoline_list.next; + struct trampoline_frag *prev = &ts->trampoline_list; + + for ( ; tf; prev = tf, tf = tf->next) + { + if (tf->fragP->fr_var < 3) { - case 1: - assert (0); - return 0; - case 2: - case 3: - return 0; - case 4: - if (wide_nops >= 1 && num_widens == 1) - return 1; /* case 4a */ - return 0; - case 5: - if (wide_nops >= 1 && num_widens == 2) - return 1; /* case 5a */ - return 0; - case 6: - if (wide_nops >= 2) - return 0; /* case 6a */ - else if (wide_nops >= 1 && num_widens == 3) - return 1; /* case 6b */ - return 0; - case 7: - if (wide_nops >= 1 && num_widens == 4) - return 1; /* case 7a */ - else if (wide_nops >= 2 && num_widens == 1) - return 1; /* case 7b */ - return 0; - default: - assert (0); - return 0; + frag_wane (tf->fragP); + prev->next = tf->next; + tf->fragP = NULL; } } - assert (0); - return 0; +} + + +static int +init_trampoline_frag (struct trampoline_frag *trampP) +{ + fragS *fp = trampP->fragP; + int growth = 0; + + if (fp->fr_fix == 0) + { + symbolS *lsym; + char label[10 + 2 * sizeof(fp)]; + sprintf (label, ".L0_TR_%p", fp); + + lsym = (symbolS *)local_symbol_make (label, now_seg, 0, fp); + fp->fr_symbol = lsym; + if (trampP->needs_jump_around) + { + /* Add a jump around this block of jumps, in case + control flows into this block. */ + fixS *fixP; + TInsn insn; + xtensa_format fmt; + xtensa_isa isa = xtensa_default_isa; + + fp->tc_frag_data.is_insn = 1; + /* Assemble a jump insn. */ + tinsn_init (&insn); + insn.insn_type = ITYPE_INSN; + insn.opcode = xtensa_j_opcode; + insn.ntok = 1; + set_expr_symbol_offset (&insn.tok[0], lsym, 3); + fmt = xg_get_single_format (xtensa_j_opcode); + tinsn_to_slotbuf (fmt, 0, &insn, trampoline_slotbuf); + xtensa_format_set_slot (isa, fmt, 0, trampoline_buf, trampoline_slotbuf); + xtensa_insnbuf_to_chars (isa, trampoline_buf, (unsigned char *)fp->fr_literal, 3); + fp->fr_fix += 3; + fp->fr_var -= 3; + growth = 3; + fixP = fix_new (fp, 0, 3, lsym, 3, TRUE, BFD_RELOC_XTENSA_SLOT0_OP); + trampP->fixP = fixP; + } + } + return growth; +} + + +static int +add_jump_to_trampoline (struct trampoline_frag *trampP, fragS *origfrag) +{ + fragS *tramp = trampP->fragP; + fixS *fixP; + int offset = tramp->fr_fix; /* Where to assemble the j insn. */ + TInsn insn; + symbolS *lsym; + symbolS *tsym; + int toffset; + xtensa_format fmt; + xtensa_isa isa = xtensa_default_isa; + int growth = 0; + + lsym = tramp->fr_symbol; + /* Assemble a jump to the target label in the trampoline frag. */ + tsym = origfrag->tc_frag_data.slot_symbols[0]; + toffset = origfrag-> tc_frag_data.slot_offsets[0]; + tinsn_init (&insn); + insn.insn_type = ITYPE_INSN; + insn.opcode = xtensa_j_opcode; + insn.ntok = 1; + set_expr_symbol_offset (&insn.tok[0], tsym, toffset); + fmt = xg_get_single_format (xtensa_j_opcode); + tinsn_to_slotbuf (fmt, 0, &insn, trampoline_slotbuf); + xtensa_format_set_slot (isa, fmt, 0, trampoline_buf, trampoline_slotbuf); + xtensa_insnbuf_to_chars (isa, trampoline_buf, (unsigned char *)tramp->fr_literal + offset, 3); + tramp->fr_fix += 3; + tramp->fr_var -= 3; + growth = 3; + /* add a fix-up for the trampoline jump. */ + fixP = fix_new (tramp, tramp->fr_fix - 3, 3, tsym, toffset, TRUE, BFD_RELOC_XTENSA_SLOT0_OP); + /* Modify the jump at the start of this trampoline to point past the newly-added jump. */ + fixP = trampP->fixP; + if (fixP) + fixP->fx_offset += 3; + /* Modify the original j to point here. */ + origfrag->tc_frag_data.slot_symbols[0] = lsym; + origfrag->tc_frag_data.slot_offsets[0] = tramp->fr_fix - 3; + /* If trampoline is full, remove it from the list. */ + check_and_update_trampolines (); + + return growth; } @@ -8789,21 +10092,20 @@ relax_frag_immed (segT segP, int old_size; bfd_boolean negatable_branch = FALSE; bfd_boolean branch_jmp_to_next = FALSE; - bfd_boolean wide_insn = FALSE; + bfd_boolean from_wide_insn = FALSE; xtensa_isa isa = xtensa_default_isa; IStack istack; offsetT frag_offset; int num_steps; - fragS *lit_fragP; int num_text_bytes, num_literal_bytes; - int literal_diff, total_text_diff, this_text_diff, first; + int literal_diff, total_text_diff, this_text_diff; - assert (fragP->fr_opcode != NULL); + gas_assert (fragP->fr_opcode != NULL); xg_clear_vinsn (&cur_vinsn); vinsn_from_chars (&cur_vinsn, fragP->fr_opcode); if (cur_vinsn.num_slots > 1) - wide_insn = TRUE; + from_wide_insn = TRUE; tinsn = cur_vinsn.slots[slot]; tinsn_immed_from_frag (&tinsn, fragP, slot); @@ -8835,60 +10137,73 @@ relax_frag_immed (segT segP, istack_init (&istack); num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP, frag_offset, min_steps, stretch); - if (num_steps < min_steps) - { - as_fatal (_("internal error: relaxation failed")); - return 0; - } - - if (num_steps > RELAX_IMMED_MAXSTEPS) - { - as_fatal (_("internal error: relaxation requires too many steps")); - return 0; - } + gas_assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS); fragP->tc_frag_data.slot_subtypes[slot] = (int) RELAX_IMMED + num_steps; /* Figure out the number of bytes needed. */ - lit_fragP = 0; num_literal_bytes = get_num_stack_literal_bytes (&istack); - literal_diff = - num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot]; - first = 0; - while (istack.insn[first].opcode == XTENSA_UNDEFINED) - first++; + literal_diff + = num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot]; num_text_bytes = get_num_stack_text_bytes (&istack); - if (wide_insn) + + if (from_wide_insn) { + int first = 0; + while (istack.insn[first].opcode == XTENSA_UNDEFINED) + first++; + num_text_bytes += old_size; if (opcode_fits_format_slot (istack.insn[first].opcode, fmt, slot)) num_text_bytes -= xg_get_single_size (istack.insn[first].opcode); + else + { + /* The first instruction in the relaxed sequence will go after + the current wide instruction, and thus its symbolic immediates + might not fit. */ + + istack_init (&istack); + num_steps = xg_assembly_relax (&istack, &tinsn, segP, fragP, + frag_offset + old_size, + min_steps, stretch + old_size); + gas_assert (num_steps >= min_steps && num_steps <= RELAX_IMMED_MAXSTEPS); + + fragP->tc_frag_data.slot_subtypes[slot] + = (int) RELAX_IMMED + num_steps; + + num_literal_bytes = get_num_stack_literal_bytes (&istack); + literal_diff + = num_literal_bytes - fragP->tc_frag_data.literal_expansion[slot]; + + num_text_bytes = get_num_stack_text_bytes (&istack) + old_size; + } } + total_text_diff = num_text_bytes - old_size; this_text_diff = total_text_diff - fragP->tc_frag_data.text_expansion[slot]; /* It MUST get larger. If not, we could get an infinite loop. */ - assert (num_text_bytes >= 0); - assert (literal_diff >= 0); - assert (total_text_diff >= 0); + gas_assert (num_text_bytes >= 0); + gas_assert (literal_diff >= 0); + gas_assert (total_text_diff >= 0); fragP->tc_frag_data.text_expansion[slot] = total_text_diff; fragP->tc_frag_data.literal_expansion[slot] = num_literal_bytes; - assert (fragP->tc_frag_data.text_expansion[slot] >= 0); - assert (fragP->tc_frag_data.literal_expansion[slot] >= 0); + gas_assert (fragP->tc_frag_data.text_expansion[slot] >= 0); + gas_assert (fragP->tc_frag_data.literal_expansion[slot] >= 0); /* Find the associated expandable literal for this. */ if (literal_diff != 0) { - lit_fragP = fragP->tc_frag_data.literal_frags[slot]; + fragS *lit_fragP = fragP->tc_frag_data.literal_frags[slot]; if (lit_fragP) { - assert (literal_diff == 4); + gas_assert (literal_diff == 4); lit_fragP->tc_frag_data.unreported_expansion += literal_diff; /* We expect that the literal section state has NOT been modified yet. */ - assert (lit_fragP->fr_type == rs_machine_dependent + gas_assert (lit_fragP->fr_type == rs_machine_dependent && lit_fragP->fr_subtype == RELAX_LITERAL); lit_fragP->fr_subtype = RELAX_LITERAL_NR; @@ -8901,6 +10216,37 @@ relax_frag_immed (segT segP, if (negatable_branch && istack.ninsn > 1) update_next_frag_state (fragP); + /* If last insn is a jump, and it cannot reach its target, try to find a trampoline. */ + if (istack.ninsn > 2 && + istack.insn[istack.ninsn - 1].insn_type == ITYPE_LABEL && + istack.insn[istack.ninsn - 2].insn_type == ITYPE_INSN && + istack.insn[istack.ninsn - 2].opcode == xtensa_j_opcode) + { + TInsn *jinsn = &istack.insn[istack.ninsn - 2]; + + if (!xg_symbolic_immeds_fit (jinsn, segP, fragP, fragP->fr_offset, total_text_diff)) + { + struct trampoline_frag *tf = get_best_trampoline (jinsn, fragP); + + if (tf) + { + this_text_diff += init_trampoline_frag (tf); + this_text_diff += add_jump_to_trampoline (tf, fragP); + } + else + { + /* If target symbol is undefined, assume it will reach once linked. */ + expressionS *exp = &istack.insn[istack.ninsn - 2].tok[0]; + + if (exp->X_op == O_symbol && S_IS_DEFINED (exp->X_add_symbol)) + { + as_bad_where (fragP->fr_file, fragP->fr_line, + _("jump target out of range; no usable trampoline found")); + } + } + } + } + return this_text_diff; } @@ -8920,10 +10266,10 @@ md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, segT sec, fragS *fragp) int slot; int num_slots; xtensa_format fmt; - char *file_name; + const char *file_name; unsigned line; - as_where (&file_name, &line); + file_name = as_where (&line); new_logical_line (fragp->fr_file, fragp->fr_line); switch (fragp->fr_subtype) @@ -8961,6 +10307,7 @@ md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, segT sec, fragS *fragp) case RELAX_IMMED: case RELAX_IMMED_STEP1: case RELAX_IMMED_STEP2: + case RELAX_IMMED_STEP3: /* Place the immediate. */ convert_frag_immed (sec, fragp, @@ -9010,7 +10357,7 @@ md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, segT sec, fragS *fragp) fragS *f; fragp->fr_subtype = RELAX_LITERAL_FINAL; - assert (fragp->tc_frag_data.unreported_expansion == 4); + gas_assert (fragp->tc_frag_data.unreported_expansion == 4); memset (&fragp->fr_literal[fragp->fr_fix], 0, 4); fragp->fr_var -= 4; fragp->fr_fix += 4; @@ -9020,6 +10367,9 @@ md_convert_frag (bfd *abfd ATTRIBUTE_UNUSED, segT sec, fragS *fragp) else as_bad (_("invalid relaxation fragment result")); break; + + case RELAX_TRAMPOLINE: + break; } fragp->fr_var = 0; @@ -9063,12 +10413,12 @@ convert_frag_narrow (segT segP, fragS *fragP, xtensa_format fmt, int slot) int size, old_size, diff; offsetT frag_offset; - assert (slot == 0); + gas_assert (slot == 0); tinsn_from_chars (&tinsn, fragP->fr_opcode, 0); if (fragP->tc_frag_data.is_aligning_branch == 1) { - assert (fragP->tc_frag_data.text_expansion[0] == 1 + gas_assert (fragP->tc_frag_data.text_expansion[0] == 1 || fragP->tc_frag_data.text_expansion[0] == 0); convert_frag_immed (segP, fragP, fragP->tc_frag_data.text_expansion[0], fmt, slot); @@ -9082,7 +10432,7 @@ convert_frag_narrow (segT segP, fragS *fragP, xtensa_format fmt, int slot) return; } - assert (fragP->fr_opcode != NULL); + gas_assert (fragP->fr_opcode != NULL); /* Frags in this relaxation state should only contain single instruction bundles. */ @@ -9106,8 +10456,8 @@ convert_frag_narrow (segT segP, fragS *fragP, xtensa_format fmt, int slot) frag_offset, TRUE); diff = size - old_size; - assert (diff >= 0); - assert (diff <= fragP->fr_var); + gas_assert (diff >= 0); + gas_assert (diff <= fragP->fr_var); fragP->fr_var -= diff; fragP->fr_fix += diff; @@ -9121,7 +10471,7 @@ convert_frag_fill_nop (fragS *fragP) { char *loc = &fragP->fr_literal[fragP->fr_fix]; int size = fragP->tc_frag_data.text_expansion[0]; - assert ((unsigned) size == (fragP->fr_next->fr_address + gas_assert ((unsigned) size == (fragP->fr_next->fr_address - fragP->fr_address - fragP->fr_fix)); if (size == 0) { @@ -9155,17 +10505,17 @@ convert_frag_immed (segT segP, bfd_boolean branch_jmp_to_next = FALSE; char *fr_opcode = fragP->fr_opcode; xtensa_isa isa = xtensa_default_isa; - bfd_boolean wide_insn = FALSE; + bfd_boolean from_wide_insn = FALSE; int bytes; bfd_boolean is_loop; - assert (fr_opcode != NULL); + gas_assert (fr_opcode != NULL); xg_clear_vinsn (&cur_vinsn); vinsn_from_chars (&cur_vinsn, fr_opcode); if (cur_vinsn.num_slots > 1) - wide_insn = TRUE; + from_wide_insn = TRUE; orig_tinsn = cur_vinsn.slots[slot]; tinsn_immed_from_frag (&orig_tinsn, fragP, slot); @@ -9188,7 +10538,7 @@ convert_frag_immed (segT segP, else { bytes += fragP->tc_frag_data.text_expansion[0]; - assert (bytes == 2 || bytes == 3); + gas_assert (bytes == 2 || bytes == 3); build_nop (&cur_vinsn.slots[0], bytes); fragP->fr_fix += fragP->tc_frag_data.text_expansion[0]; } @@ -9213,7 +10563,6 @@ convert_frag_immed (segT segP, symbolS *gen_label = NULL; offsetT frag_offset; bfd_boolean first = TRUE; - bfd_boolean last_is_jump; /* It does not fit. Find something that does and convert immediately. */ @@ -9260,20 +10609,20 @@ convert_frag_immed (segT segP, unreach = unreach->fr_next; } - assert (unreach->fr_type == rs_machine_dependent + gas_assert (unreach->fr_type == rs_machine_dependent && (unreach->fr_subtype == RELAX_MAYBE_UNREACHABLE || unreach->fr_subtype == RELAX_UNREACHABLE)); target_offset += unreach->tc_frag_data.text_expansion[0]; } - assert (gen_label == NULL); + gas_assert (gen_label == NULL); gen_label = symbol_new (FAKE_LABEL_NAME, now_seg, fr_opcode - fragP->fr_literal + target_offset, fragP); break; case ITYPE_INSN: - if (first && wide_insn) + if (first && from_wide_insn) { target_offset += xtensa_format_length (isa, fmt); first = FALSE; @@ -9288,7 +10637,6 @@ convert_frag_immed (segT segP, total_size = 0; first = TRUE; - last_is_jump = FALSE; for (i = 0; i < istack.ninsn; i++) { TInsn *tinsn = &istack.insn[i]; @@ -9302,16 +10650,13 @@ convert_frag_immed (segT segP, case ITYPE_LITERAL: lit_frag = fragP->tc_frag_data.literal_frags[slot]; /* Already checked. */ - assert (lit_frag != NULL); - assert (lit_sym != NULL); - assert (tinsn->ntok == 1); + gas_assert (lit_frag != NULL); + gas_assert (lit_sym != NULL); + gas_assert (tinsn->ntok == 1); /* Add a fixup. */ target_seg = S_GET_SEGMENT (lit_sym); - assert (target_seg); - if (tinsn->tok[0].X_op == O_pltrel) - reloc_type = BFD_RELOC_XTENSA_PLT; - else - reloc_type = BFD_RELOC_32; + gas_assert (target_seg); + reloc_type = map_operator_to_reloc (tinsn->tok[0].X_op, TRUE); fix_new_exp_in_seg (target_seg, 0, lit_frag, 0, 4, &tinsn->tok[0], FALSE, reloc_type); break; @@ -9322,7 +10667,7 @@ convert_frag_immed (segT segP, case ITYPE_INSN: xg_resolve_labels (tinsn, gen_label); xg_resolve_literals (tinsn, lit_sym); - if (wide_insn && first) + if (from_wide_insn && first) { first = FALSE; if (opcode_fits_format_slot (tinsn->opcode, fmt, slot)) @@ -9361,10 +10706,10 @@ convert_frag_immed (segT segP, } diff = total_size - old_size; - assert (diff >= 0); + gas_assert (diff >= 0); if (diff != 0) expanded = TRUE; - assert (diff <= fragP->fr_var); + gas_assert (diff <= fragP->fr_var); fragP->fr_var -= diff; fragP->fr_fix += diff; } @@ -9417,7 +10762,7 @@ fix_new_exp_in_seg (segT new_seg, segT seg = now_seg; subsegT subseg = now_subseg; - assert (new_seg != 0); + gas_assert (new_seg != 0); subseg_set (new_seg, new_subseg); new_fix = fix_new_exp (frag, where, size, exp, pcrel, r_type); @@ -9471,18 +10816,18 @@ convert_frag_immed_finish_loop (segT segP, fragS *fragP, TInsn *tinsn) tinsn_from_chars (&loop_insn, fragP->fr_opcode + loop_offset, 0); tinsn_immed_from_frag (&loop_insn, fragP, 0); - assert (xtensa_opcode_is_loop (isa, loop_insn.opcode) == 1); + gas_assert (xtensa_opcode_is_loop (isa, loop_insn.opcode) == 1); addi_offset += loop_offset; addmi_offset += loop_offset; - assert (tinsn->ntok == 2); + gas_assert (tinsn->ntok == 2); if (tinsn->tok[1].X_op == O_constant) target = tinsn->tok[1].X_add_number; else if (tinsn->tok[1].X_op == O_symbol) { /* Find the fragment. */ symbolS *sym = tinsn->tok[1].X_add_symbol; - assert (S_GET_SEGMENT (sym) == segP + gas_assert (S_GET_SEGMENT (sym) == segP || S_GET_SEGMENT (sym) == absolute_section); target = (S_GET_VALUE (sym) + tinsn->tok[1].X_add_number); } @@ -9492,11 +10837,6 @@ convert_frag_immed_finish_loop (segT segP, fragS *fragP, TInsn *tinsn) target = 0; } - know (symbolP); - know (symbolP->sy_frag); - know (!(S_GET_SEGMENT (symbolP) == absolute_section) - || symbol_get_frag (symbolP) == &zero_address_frag); - loop_length = target - (fragP->fr_address + fragP->fr_fix); loop_length_hi = loop_length & ~0x0ff; loop_length_lo = loop_length & 0x0ff; @@ -9513,10 +10853,10 @@ convert_frag_immed_finish_loop (segT segP, fragS *fragP, TInsn *tinsn) _("loop too long for LOOP instruction")); tinsn_from_chars (&addi_insn, fragP->fr_opcode + addi_offset, 0); - assert (addi_insn.opcode == xtensa_addi_opcode); + gas_assert (addi_insn.opcode == xtensa_addi_opcode); tinsn_from_chars (&addmi_insn, fragP->fr_opcode + addmi_offset, 0); - assert (addmi_insn.opcode == xtensa_addmi_opcode); + gas_assert (addmi_insn.opcode == xtensa_addmi_opcode); set_expr_const (&addi_insn.tok[2], loop_length_lo); tinsn_to_insnbuf (&addi_insn, insnbuf); @@ -9587,7 +10927,7 @@ get_subseg_info (segT seg, subsegT subseg) static subseg_map * add_subseg_info (segT seg, subsegT subseg) { - subseg_map *subseg_e = (subseg_map *) xmalloc (sizeof (subseg_map)); + subseg_map *subseg_e = XNEW (subseg_map); memset (subseg_e, 0, sizeof (subseg_map)); subseg_e->seg = seg; subseg_e->subseg = subseg; @@ -9669,7 +11009,7 @@ xtensa_move_seg_list_to_beginning (seg_list *head) segT literal_section = head->seg; /* Move the literal section to the front of the section list. */ - assert (literal_section); + gas_assert (literal_section); if (literal_section != stdoutput->sections) { bfd_section_list_remove (stdoutput, literal_section); @@ -9687,23 +11027,134 @@ xtensa_move_literals (void) { seg_list *segment; frchainS *frchain_from, *frchain_to; - fragS *search_frag, *next_frag, *last_frag, *literal_pool, *insert_after; + fragS *search_frag, *next_frag, *literal_pool, *insert_after; fragS **frag_splice; emit_state state; segT dest_seg; fixS *fix, *next_fix, **fix_splice; sym_list *lit; + struct litpool_seg *lps; + const char *init_name = INIT_SECTION_NAME; + const char *fini_name = FINI_SECTION_NAME; + int init_name_len = strlen(init_name); + int fini_name_len = strlen(fini_name); mark_literal_frags (literal_head->next); if (use_literal_section) return; + /* Assign addresses (rough estimates) to the potential literal pool locations + and create new ones if the gaps are too large. */ + + for (lps = litpool_seg_list.next; lps; lps = lps->next) + { + frchainS *frchP = seg_info (lps->seg)->frchainP; + struct litpool_frag *lpf = lps->frag_list.next; + addressT addr = 0; + + for ( ; frchP; frchP = frchP->frch_next) + { + fragS *fragP; + for (fragP = frchP->frch_root; fragP; fragP = fragP->fr_next) + { + if (lpf && fragP == lpf->fragP) + { + gas_assert(fragP->fr_type == rs_machine_dependent && + (fragP->fr_subtype == RELAX_LITERAL_POOL_BEGIN || + fragP->fr_subtype == RELAX_LITERAL_POOL_CANDIDATE_BEGIN)); + /* Found a litpool location. */ + lpf->addr = addr; + lpf = lpf->next; + } + if (fragP->fr_type == rs_machine_dependent && + fragP->fr_subtype == RELAX_SLOTS) + { + int slot; + for (slot = 0; slot < MAX_SLOTS; slot++) + { + if (fragP->tc_frag_data.literal_frags[slot]) + { + /* L32R; point its literal to the nearest litpool + preferring non-"candidate" positions to avoid + the jump-around. */ + fragS *litfrag = fragP->tc_frag_data.literal_frags[slot]; + struct litpool_frag *lp = lpf->prev; + if (!lp->fragP) + { + break; + } + while (lp->fragP->fr_subtype == + RELAX_LITERAL_POOL_CANDIDATE_BEGIN) + { + lp = lp->prev; + if (lp->fragP == NULL) + { + /* End of list; have to bite the bullet. + Take the nearest. */ + lp = lpf->prev; + break; + } + /* Does it (conservatively) reach? */ + if (addr - lp->addr <= 128 * 1024) + { + if (lp->fragP->fr_subtype == RELAX_LITERAL_POOL_BEGIN) + { + /* Found a good one. */ + break; + } + else if (lp->prev->fragP && + addr - lp->prev->addr > 128 * 1024) + { + /* This is still a "candidate" but the next one + will be too far away, so revert to the nearest + one, convert it and add the jump around. */ + fragS *poolbeg; + fragS *poolend; + symbolS *lsym; + char label[10 + 2 * sizeof (fragS *)]; + lp = lpf->prev; + poolbeg = lp->fragP; + lp->priority = 1; + poolbeg->fr_subtype = RELAX_LITERAL_POOL_BEGIN; + poolend = poolbeg->fr_next; + gas_assert (poolend->fr_type == rs_machine_dependent && + poolend->fr_subtype == RELAX_LITERAL_POOL_END); + /* Create a local symbol pointing to the + end of the pool. */ + sprintf (label, ".L0_LT_%p", poolbeg); + lsym = (symbolS *)local_symbol_make (label, lps->seg, + 0, poolend); + poolbeg->fr_symbol = lsym; + /* Rest is done in xtensa_relax_frag. */ + } + } + } + if (! litfrag->tc_frag_data.literal_frag) + { + /* Take earliest use of this literal to avoid + forward refs. */ + litfrag->tc_frag_data.literal_frag = lp->fragP; + } + } + } + } + addr += fragP->fr_fix; + if (fragP->fr_type == rs_fill) + addr += fragP->fr_offset; + } + } + } + for (segment = literal_head->next; segment; segment = segment->next) { + const char *seg_name = segment_name (segment->seg); + /* Keep the literals for .init and .fini in separate sections. */ - if (!strcmp (segment_name (segment->seg), INIT_SECTION_NAME) - || !strcmp (segment_name (segment->seg), FINI_SECTION_NAME)) + if ((!memcmp (seg_name, init_name, init_name_len) && + !strcmp (seg_name + init_name_len, ".literal")) || + (!memcmp (seg_name, fini_name, fini_name_len) && + !strcmp (seg_name + fini_name_len, ".literal"))) continue; frchain_from = seg_info (segment->seg)->frchainP; @@ -9712,14 +11163,22 @@ xtensa_move_literals (void) frchain_to = NULL; frag_splice = &(frchain_from->frch_root); - while (!search_frag->tc_frag_data.literal_frag) + while (search_frag && !search_frag->tc_frag_data.literal_frag) { - assert (search_frag->fr_fix == 0 + gas_assert (search_frag->fr_fix == 0 || search_frag->fr_type == rs_align); search_frag = search_frag->fr_next; } - assert (search_frag->tc_frag_data.literal_frag->fr_subtype + if (!search_frag) + { + search_frag = frchain_from->frch_root; + as_bad_where (search_frag->fr_file, search_frag->fr_line, + _("literal pool location required for text-section-literals; specify with .literal_position")); + continue; + } + + gas_assert (search_frag->tc_frag_data.literal_frag->fr_subtype == RELAX_LITERAL_POOL_BEGIN); xtensa_switch_section_emit_state (&state, segment->seg, 0); @@ -9729,34 +11188,75 @@ xtensa_move_literals (void) frags in it. */ frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL); xtensa_set_frag_assembly_state (frag_now); - last_frag = frag_now; frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL); xtensa_set_frag_assembly_state (frag_now); while (search_frag != frag_now) { next_frag = search_frag->fr_next; - - /* First, move the frag out of the literal section and - to the appropriate place. */ if (search_frag->tc_frag_data.literal_frag) { literal_pool = search_frag->tc_frag_data.literal_frag; - assert (literal_pool->fr_subtype == RELAX_LITERAL_POOL_BEGIN); + gas_assert (literal_pool->fr_subtype == RELAX_LITERAL_POOL_BEGIN); frchain_to = literal_pool->tc_frag_data.lit_frchain; - assert (frchain_to); + gas_assert (frchain_to); + } + + if (search_frag->fr_type == rs_fill && search_frag->fr_fix == 0) + { + /* Skip empty fill frags. */ + *frag_splice = next_frag; + search_frag = next_frag; + continue; + } + + if (search_frag->fr_type == rs_align) + { + /* Skip alignment frags, because the pool as a whole will be + aligned if used, and we don't want to force alignment if the + pool is unused. */ + *frag_splice = next_frag; + search_frag = next_frag; + continue; } - insert_after = literal_pool; - while (insert_after->fr_next->fr_subtype != RELAX_LITERAL_POOL_END) - insert_after = insert_after->fr_next; + /* First, move the frag out of the literal section and + to the appropriate place. */ + /* Insert an aligmnent frag at start of pool. */ + if (literal_pool->fr_next->fr_type == rs_machine_dependent && + literal_pool->fr_next->fr_subtype == RELAX_LITERAL_POOL_END) + { + segT pool_seg = literal_pool->fr_next->tc_frag_data.lit_seg; + emit_state prev_state; + fragS *prev_frag; + fragS *align_frag; + xtensa_switch_section_emit_state (&prev_state, pool_seg, 0); + prev_frag = frag_now; + frag_variant (rs_fill, 0, 0, 0, NULL, 0, NULL); + align_frag = frag_now; + frag_align (2, 0, 0); + /* Splice it into the right place. */ + prev_frag->fr_next = align_frag->fr_next; + align_frag->fr_next = literal_pool->fr_next; + literal_pool->fr_next = align_frag; + /* Insert after this one. */ + literal_pool->tc_frag_data.literal_frag = align_frag; + xtensa_restore_emit_state (&prev_state); + } + insert_after = literal_pool->tc_frag_data.literal_frag; dest_seg = insert_after->fr_next->tc_frag_data.lit_seg; + /* Skip align frag. */ + if (insert_after->fr_next->fr_type == rs_align) + { + insert_after = insert_after->fr_next; + } *frag_splice = next_frag; search_frag->fr_next = insert_after->fr_next; insert_after->fr_next = search_frag; search_frag->tc_frag_data.lit_seg = dest_seg; + literal_pool->tc_frag_data.literal_frag = search_frag; /* Now move any fixups associated with this frag to the right section. */ @@ -9785,7 +11285,7 @@ xtensa_move_literals (void) frchain_from = seg_info (segment->seg)->frchainP; as_warn (_("fixes not all moved from %s"), segment->seg->name); - assert (frchain_from->fix_root == NULL); + gas_assert (frchain_from->fix_root == NULL); } frchain_from->fix_tail = NULL; xtensa_restore_emit_state (&state); @@ -9795,9 +11295,9 @@ xtensa_move_literals (void) for (lit = literal_syms; lit; lit = lit->next) { symbolS *lit_sym = lit->sym; - segT dest_seg = symbol_get_frag (lit_sym)->tc_frag_data.lit_seg; - if (dest_seg) - S_SET_SEGMENT (lit_sym, dest_seg); + segT dseg = symbol_get_frag (lit_sym)->tc_frag_data.lit_seg; + if (dseg) + S_SET_SEGMENT (lit_sym, dseg); } } @@ -9838,7 +11338,7 @@ xtensa_reorder_seg_list (seg_list *head, segT after) segT literal_section = head->seg; /* Move the literal section after "after". */ - assert (literal_section); + gas_assert (literal_section); if (literal_section != after) { bfd_section_list_remove (stdoutput, literal_section); @@ -9873,7 +11373,7 @@ xtensa_reorder_segments (void) /* Now perform the final error check. */ for (sec = stdoutput->sections; sec != NULL; sec = sec->next) new_count++; - assert (new_count == old_count); + gas_assert (new_count == old_count); } @@ -9914,7 +11414,10 @@ xtensa_switch_to_non_abs_literal_fragment (emit_state *result) && !recursive && !is_init && ! is_fini) { - as_bad (_("literal pool location required for text-section-literals; specify with .literal_position")); + if (!auto_litpools) + { + as_bad (_("literal pool location required for text-section-literals; specify with .literal_position")); + } /* When we mark a literal pool location, we want to put a frag in the literal pool that points to it. But to do that, we want to @@ -9979,7 +11482,7 @@ match_section_group (bfd *abfd ATTRIBUTE_UNUSED, asection *sec, void *inf) { const char *gname = inf; const char *group_name = elf_group_name (sec); - + return (group_name == gname || (group_name != NULL && gname != NULL @@ -9994,7 +11497,8 @@ static segT cache_literal_section (bfd_boolean use_abs_literals) { const char *text_name, *group_name = 0; - char *base_name, *name, *suffix; + const char *base_name, *suffix; + char *name; segT *pcached; segT seg, current_section; int current_subsec; @@ -10020,7 +11524,7 @@ cache_literal_section (bfd_boolean use_abs_literals) if (*pcached) return *pcached; - + text_name = default_lit_sections.lit_prefix; if (! text_name || ! *text_name) { @@ -10032,32 +11536,37 @@ cache_literal_section (bfd_boolean use_abs_literals) base_name = use_abs_literals ? ".lit4" : ".literal"; if (group_name) { - name = xmalloc (strlen (base_name) + strlen (group_name) + 2); - sprintf (name, "%s.%s", base_name, group_name); + name = concat (base_name, ".", group_name, (char *) NULL); } else if (strncmp (text_name, ".gnu.linkonce.", linkonce_len) == 0) { suffix = strchr (text_name + linkonce_len, '.'); - name = xmalloc (linkonce_len + strlen (base_name) + 1 - + (suffix ? strlen (suffix) : 0)); - strcpy (name, ".gnu.linkonce"); - strcat (name, base_name); - if (suffix) - strcat (name, suffix); + name = concat (".gnu.linkonce", base_name, suffix ? suffix : "", + (char *) NULL); linkonce = TRUE; } else { - /* If the section name ends with ".text", then replace that suffix - instead of appending an additional suffix. */ + /* If the section name begins or ends with ".text", then replace + that portion instead of appending an additional suffix. */ size_t len = strlen (text_name); - if (len >= 5 && strcmp (text_name + len - 5, ".text") == 0) + if (len >= 5 + && (strcmp (text_name + len - 5, ".text") == 0 + || strncmp (text_name, ".text", 5) == 0)) len -= 5; - name = xmalloc (len + strlen (base_name) + 1); - strcpy (name, text_name); - strcpy (name + len, base_name); + name = XNEWVEC (char, len + strlen (base_name) + 1); + if (strncmp (text_name, ".text", 5) == 0) + { + strcpy (name, base_name); + strcat (name, text_name + 5); + } + else + { + strcpy (name, text_name); + strcpy (name + len, base_name); + } } /* Canonicalize section names to allow renaming literal sections. @@ -10076,7 +11585,7 @@ cache_literal_section (bfd_boolean use_abs_literals) if (! use_abs_literals) { /* Add the newly created literal segment to the list. */ - seg_list *n = (seg_list *) xmalloc (sizeof (seg_list)); + seg_list *n = XNEW (seg_list); n->seg = seg; n->next = literal_head->next; literal_head->next = n; @@ -10112,17 +11621,16 @@ static void xtensa_create_property_segments (frag_predicate, frag_predicate, const char *, xt_section_type); static void xtensa_create_xproperty_segments (frag_flags_fn, const char *, xt_section_type); -static segment_info_type *retrieve_segment_info (segT); +static bfd_boolean exclude_section_from_property_tables (segT); static bfd_boolean section_has_property (segT, frag_predicate); static bfd_boolean section_has_xproperty (segT, frag_flags_fn); static void add_xt_block_frags - (segT, segT, xtensa_block_info **, frag_predicate, frag_predicate); + (segT, xtensa_block_info **, frag_predicate, frag_predicate); static bfd_boolean xtensa_frag_flags_is_empty (const frag_flags *); static void xtensa_frag_flags_init (frag_flags *); static void get_frag_property_flags (const fragS *, frag_flags *); -static bfd_vma frag_flags_to_number (const frag_flags *); -static void add_xt_prop_frags - (segT, segT, xtensa_block_info **, frag_flags_fn); +static flagword frag_flags_to_number (const frag_flags *); +static void add_xt_prop_frags (segT, xtensa_block_info **, frag_flags_fn); /* Set up property tables after relaxation. */ @@ -10132,6 +11640,8 @@ xtensa_post_relax_hook (void) xtensa_move_seg_list_to_beginning (literal_head); xtensa_find_unmarked_state_frags (); + xtensa_mark_frags_for_org (); + xtensa_mark_difference_of_two_symbols (); xtensa_create_property_segments (get_frag_is_literal, NULL, @@ -10152,7 +11662,7 @@ xtensa_post_relax_hook (void) static bfd_boolean get_frag_is_literal (const fragS *fragP) { - assert (fragP != NULL); + gas_assert (fragP != NULL); return fragP->tc_frag_data.is_literal; } @@ -10175,23 +11685,23 @@ xtensa_create_property_segments (frag_predicate property_function, seclist = &(*seclist)->next) { segT sec = *seclist; - flagword flags; - flags = bfd_get_section_flags (stdoutput, sec); - if (flags & SEC_DEBUGGING) - continue; - if (!(flags & SEC_ALLOC)) + if (exclude_section_from_property_tables (sec)) continue; if (section_has_property (sec, property_function)) { - segT insn_sec = - xtensa_get_property_section (sec, section_name_base); - segment_info_type *xt_seg_info = retrieve_segment_info (insn_sec); - xtensa_block_info **xt_blocks = - &xt_seg_info->tc_segment_info_data.blocks[sec_type]; + segment_info_type *xt_seg_info; + xtensa_block_info **xt_blocks; + segT prop_sec = xtensa_make_property_section (sec, section_name_base); + + prop_sec->output_section = prop_sec; + subseg_set (prop_sec, 0); + xt_seg_info = seg_info (prop_sec); + xt_blocks = &xt_seg_info->tc_segment_info_data.blocks[sec_type]; + /* Walk over all of the frchains here and add new sections. */ - add_xt_block_frags (sec, insn_sec, xt_blocks, property_function, + add_xt_block_frags (sec, xt_blocks, property_function, end_property_function); } } @@ -10212,7 +11722,6 @@ xtensa_create_property_segments (frag_predicate property_function, if (block) { xtensa_block_info *cur_block; - /* This is a section with some data. */ int num_recs = 0; bfd_size_type rec_size; @@ -10222,68 +11731,35 @@ xtensa_create_property_segments (frag_predicate property_function, rec_size = num_recs * 8; bfd_set_section_size (stdoutput, sec, rec_size); - /* In order to make this work with the assembler, we have to - build some frags and then build the "fixups" for it. It - would be easier to just set the contents then set the - arlents. */ - if (num_recs) { - /* Allocate a fragment and leak it. */ - fragS *fragP; - bfd_size_type frag_size; - fixS *fixes; - frchainS *frchainP; - int i; char *frag_data; + int i; - frag_size = sizeof (fragS) + rec_size; - fragP = (fragS *) xmalloc (frag_size); - - memset (fragP, 0, frag_size); - fragP->fr_address = 0; - fragP->fr_next = NULL; - fragP->fr_fix = rec_size; - fragP->fr_var = 0; - fragP->fr_type = rs_fill; - /* The rest are zeros. */ - - frchainP = seginfo->frchainP; - frchainP->frch_root = fragP; - frchainP->frch_last = fragP; - - fixes = (fixS *) xmalloc (sizeof (fixS) * num_recs); - memset (fixes, 0, sizeof (fixS) * num_recs); - - seginfo->fix_root = fixes; - seginfo->fix_tail = &fixes[num_recs - 1]; + subseg_set (sec, 0); + frag_data = frag_more (rec_size); cur_block = block; - frag_data = &fragP->fr_literal[0]; for (i = 0; i < num_recs; i++) { - fixS *fix = &fixes[i]; - assert (cur_block); + fixS *fix; /* Write the fixup. */ - if (i != num_recs - 1) - fix->fx_next = &fixes[i + 1]; - else - fix->fx_next = NULL; - fix->fx_size = 4; - fix->fx_done = 0; - fix->fx_frag = fragP; - fix->fx_where = i * 8; - fix->fx_addsy = section_symbol (cur_block->sec); - fix->fx_offset = cur_block->offset; - fix->fx_r_type = BFD_RELOC_32; - fix->fx_file = "Internal Assembly"; + gas_assert (cur_block); + fix = fix_new (frag_now, i * 8, 4, + section_symbol (cur_block->sec), + cur_block->offset, + FALSE, BFD_RELOC_32); + fix->fx_file = ""; fix->fx_line = 0; /* Write the length. */ - md_number_to_chars (&frag_data[4 + 8 * i], + md_number_to_chars (&frag_data[4 + i * 8], cur_block->size, 4); cur_block = cur_block->next; } + frag_wane (frag_now); + frag_new (0); + frag_wane (frag_now); } } } @@ -10307,23 +11783,23 @@ xtensa_create_xproperty_segments (frag_flags_fn flag_fn, seclist = &(*seclist)->next) { segT sec = *seclist; - flagword flags; - flags = bfd_get_section_flags (stdoutput, sec); - if ((flags & SEC_DEBUGGING) - || !(flags & SEC_ALLOC) - || (flags & SEC_MERGE)) + if (exclude_section_from_property_tables (sec)) continue; if (section_has_xproperty (sec, flag_fn)) { - segT insn_sec = - xtensa_get_property_section (sec, section_name_base); - segment_info_type *xt_seg_info = retrieve_segment_info (insn_sec); - xtensa_block_info **xt_blocks = - &xt_seg_info->tc_segment_info_data.blocks[sec_type]; + segment_info_type *xt_seg_info; + xtensa_block_info **xt_blocks; + segT prop_sec = xtensa_make_property_section (sec, section_name_base); + + prop_sec->output_section = prop_sec; + subseg_set (prop_sec, 0); + xt_seg_info = seg_info (prop_sec); + xt_blocks = &xt_seg_info->tc_segment_info_data.blocks[sec_type]; + /* Walk over all of the frchains here and add new sections. */ - add_xt_prop_frags (sec, insn_sec, xt_blocks, flag_fn); + add_xt_prop_frags (sec, xt_blocks, flag_fn); } } @@ -10343,7 +11819,6 @@ xtensa_create_xproperty_segments (frag_flags_fn flag_fn, if (block) { xtensa_block_info *cur_block; - /* This is a section with some data. */ int num_recs = 0; bfd_size_type rec_size; @@ -10352,113 +11827,64 @@ xtensa_create_xproperty_segments (frag_flags_fn flag_fn, rec_size = num_recs * (8 + 4); bfd_set_section_size (stdoutput, sec, rec_size); - /* elf_section_data (sec)->this_hdr.sh_entsize = 12; */ - /* In order to make this work with the assembler, we have to build - some frags then build the "fixups" for it. It would be easier to - just set the contents then set the arlents. */ - if (num_recs) { - /* Allocate a fragment and (unfortunately) leak it. */ - fragS *fragP; - bfd_size_type frag_size; - fixS *fixes; - frchainS *frchainP; - int i; char *frag_data; + int i; - frag_size = sizeof (fragS) + rec_size; - fragP = (fragS *) xmalloc (frag_size); - - memset (fragP, 0, frag_size); - fragP->fr_address = 0; - fragP->fr_next = NULL; - fragP->fr_fix = rec_size; - fragP->fr_var = 0; - fragP->fr_type = rs_fill; - /* The rest are zeros. */ - - frchainP = seginfo->frchainP; - frchainP->frch_root = fragP; - frchainP->frch_last = fragP; - - fixes = (fixS *) xmalloc (sizeof (fixS) * num_recs); - memset (fixes, 0, sizeof (fixS) * num_recs); - - seginfo->fix_root = fixes; - seginfo->fix_tail = &fixes[num_recs - 1]; + subseg_set (sec, 0); + frag_data = frag_more (rec_size); cur_block = block; - frag_data = &fragP->fr_literal[0]; for (i = 0; i < num_recs; i++) { - fixS *fix = &fixes[i]; - assert (cur_block); + fixS *fix; /* Write the fixup. */ - if (i != num_recs - 1) - fix->fx_next = &fixes[i + 1]; - else - fix->fx_next = NULL; - fix->fx_size = 4; - fix->fx_done = 0; - fix->fx_frag = fragP; - fix->fx_where = i * (8 + 4); - fix->fx_addsy = section_symbol (cur_block->sec); - fix->fx_offset = cur_block->offset; - fix->fx_r_type = BFD_RELOC_32; - fix->fx_file = "Internal Assembly"; + gas_assert (cur_block); + fix = fix_new (frag_now, i * 12, 4, + section_symbol (cur_block->sec), + cur_block->offset, + FALSE, BFD_RELOC_32); + fix->fx_file = ""; fix->fx_line = 0; /* Write the length. */ - md_number_to_chars (&frag_data[4 + (8+4) * i], + md_number_to_chars (&frag_data[4 + i * 12], cur_block->size, 4); - md_number_to_chars (&frag_data[8 + (8+4) * i], + md_number_to_chars (&frag_data[8 + i * 12], frag_flags_to_number (&cur_block->flags), - 4); + sizeof (flagword)); cur_block = cur_block->next; } + frag_wane (frag_now); + frag_new (0); + frag_wane (frag_now); } } } } -static segment_info_type * -retrieve_segment_info (segT seg) +static bfd_boolean +exclude_section_from_property_tables (segT sec) { - segment_info_type *seginfo; - seginfo = (segment_info_type *) bfd_get_section_userdata (stdoutput, seg); - if (!seginfo) - { - frchainS *frchainP; - - seginfo = (segment_info_type *) xmalloc (sizeof (*seginfo)); - memset ((void *) seginfo, 0, sizeof (*seginfo)); - seginfo->fix_root = NULL; - seginfo->fix_tail = NULL; - seginfo->bfd_section = seg; - seginfo->sym = 0; - /* We will not be dealing with these, only our special ones. */ - bfd_set_section_userdata (stdoutput, seg, (void *) seginfo); + flagword flags = bfd_get_section_flags (stdoutput, sec); - frchainP = (frchainS *) xmalloc (sizeof (frchainS)); - frchainP->frch_root = NULL; - frchainP->frch_last = NULL; - frchainP->frch_next = NULL; - frchainP->frch_subseg = 0; - frchainP->fix_root = NULL; - frchainP->fix_tail = NULL; - /* Do not init the objstack. */ - /* obstack_begin (&frchainP->frch_obstack, chunksize); */ - /* frchainP->frch_frag_now = fragP; */ - frchainP->frch_frag_now = NULL; + /* Sections that don't contribute to the memory footprint are excluded. */ + if ((flags & SEC_DEBUGGING) + || !(flags & SEC_ALLOC) + || (flags & SEC_MERGE)) + return TRUE; - seginfo->frchainP = frchainP; - } + /* Linker cie and fde optimizations mess up property entries for + eh_frame sections, but there is nothing inside them relevant to + property tables anyway. */ + if (strcmp (sec->name, ".eh_frame") == 0) + return TRUE; - return seginfo; + return FALSE; } @@ -10505,30 +11931,21 @@ section_has_xproperty (segT sec, frag_flags_fn property_function) static void add_xt_block_frags (segT sec, - segT xt_block_sec, xtensa_block_info **xt_block, frag_predicate property_function, frag_predicate end_property_function) { - segment_info_type *seg_info; - segment_info_type *xt_seg_info; - bfd_vma seg_offset; fragS *fragP; - xt_seg_info = retrieve_segment_info (xt_block_sec); - seg_info = retrieve_segment_info (sec); - /* Build it if needed. */ while (*xt_block != NULL) xt_block = &(*xt_block)->next; /* We are either at NULL at the beginning or at the end. */ /* Walk through the frags. */ - seg_offset = 0; - - if (seg_info->frchainP) + if (seg_info (sec)->frchainP) { - for (fragP = seg_info->frchainP->frch_root; + for (fragP = seg_info (sec)->frchainP->frch_root; fragP; fragP = fragP->fr_next) { @@ -10545,8 +11962,7 @@ add_xt_block_frags (segT sec, } if (*xt_block == NULL) { - xtensa_block_info *new_block = (xtensa_block_info *) - xmalloc (sizeof (xtensa_block_info)); + xtensa_block_info *new_block = XNEW (xtensa_block_info); new_block->sec = sec; new_block->offset = fragP->fr_address; new_block->size = fragP->fr_fix; @@ -10592,6 +12008,13 @@ get_frag_property_flags (const fragS *fragP, frag_flags *prop_flags) xtensa_frag_flags_init (prop_flags); if (fragP->tc_frag_data.is_literal) prop_flags->is_literal = TRUE; + if (fragP->tc_frag_data.is_specific_opcode + || fragP->tc_frag_data.is_no_transform) + { + prop_flags->is_no_transform = TRUE; + if (xtensa_frag_flags_is_empty (prop_flags)) + prop_flags->is_data = TRUE; + } if (fragP->tc_frag_data.is_unreachable) prop_flags->is_unreachable = TRUE; else if (fragP->tc_frag_data.is_insn) @@ -10601,9 +12024,6 @@ get_frag_property_flags (const fragS *fragP, frag_flags *prop_flags) prop_flags->insn.is_loop_target = TRUE; if (fragP->tc_frag_data.is_branch_target) prop_flags->insn.is_branch_target = TRUE; - if (fragP->tc_frag_data.is_specific_opcode - || fragP->tc_frag_data.is_no_transform) - prop_flags->insn.is_no_transform = TRUE; if (fragP->tc_frag_data.is_no_density) prop_flags->insn.is_no_density = TRUE; if (fragP->tc_frag_data.use_absolute_literals) @@ -10619,10 +12039,10 @@ get_frag_property_flags (const fragS *fragP, frag_flags *prop_flags) } -static bfd_vma +static flagword frag_flags_to_number (const frag_flags *prop_flags) { - bfd_vma num = 0; + flagword num = 0; if (prop_flags->is_literal) num |= XTENSA_PROP_LITERAL; if (prop_flags->is_insn) @@ -10641,8 +12061,8 @@ frag_flags_to_number (const frag_flags *prop_flags) if (prop_flags->insn.is_no_density) num |= XTENSA_PROP_INSN_NO_DENSITY; - if (prop_flags->insn.is_no_transform) - num |= XTENSA_PROP_INSN_NO_TRANSFORM; + if (prop_flags->is_no_transform) + num |= XTENSA_PROP_NO_TRANSFORM; if (prop_flags->insn.is_no_reorder) num |= XTENSA_PROP_INSN_NO_REORDER; if (prop_flags->insn.is_abslit) @@ -10681,8 +12101,8 @@ xtensa_frag_flags_combinable (const frag_flags *prop_flags_1, if (prop_flags_1->insn.is_no_density != prop_flags_2->insn.is_no_density) return FALSE; - if (prop_flags_1->insn.is_no_transform != - prop_flags_2->insn.is_no_transform) + if (prop_flags_1->is_no_transform != + prop_flags_2->is_no_transform) return FALSE; if (prop_flags_1->insn.is_no_reorder != prop_flags_2->insn.is_no_reorder) @@ -10765,17 +12185,11 @@ xtensa_xt_block_combine (xtensa_block_info *xt_block, static void add_xt_prop_frags (segT sec, - segT xt_block_sec, xtensa_block_info **xt_block, frag_flags_fn property_function) { - segment_info_type *seg_info; - segment_info_type *xt_seg_info; - bfd_vma seg_offset; fragS *fragP; - xt_seg_info = retrieve_segment_info (xt_block_sec); - seg_info = retrieve_segment_info (sec); /* Build it if needed. */ while (*xt_block != NULL) { @@ -10784,11 +12198,9 @@ add_xt_prop_frags (segT sec, /* We are either at NULL at the beginning or at the end. */ /* Walk through the frags. */ - seg_offset = 0; - - if (seg_info->frchainP) + if (seg_info (sec)->frchainP) { - for (fragP = seg_info->frchainP->frch_root; fragP; + for (fragP = seg_info (sec)->frchainP->frch_root; fragP; fragP = fragP->fr_next) { xtensa_block_info tmp_block; @@ -10807,8 +12219,7 @@ add_xt_prop_frags (segT sec, xtensa_block_info *new_block; if ((*xt_block) != NULL) xt_block = &(*xt_block)->next; - new_block = (xtensa_block_info *) - xmalloc (sizeof (xtensa_block_info)); + new_block = XNEW (xtensa_block_info); *new_block = tmp_block; *xt_block = new_block; } @@ -10833,15 +12244,14 @@ init_op_placement_info_table (void) int slot; int num_opcodes = xtensa_isa_num_opcodes (isa); - op_placement_table = (op_placement_info_table) - xmalloc (sizeof (op_placement_info) * num_opcodes); - assert (xtensa_isa_num_formats (isa) < MAX_FORMATS); + op_placement_table = XNEWVEC (op_placement_info, num_opcodes); + gas_assert (xtensa_isa_num_formats (isa) < MAX_FORMATS); for (opcode = 0; opcode < num_opcodes; opcode++) { op_placement_info *opi = &op_placement_table[opcode]; /* FIXME: Make tinsn allocation dynamic. */ - if (xtensa_opcode_num_operands (isa, opcode) >= MAX_INSN_ARGS) + if (xtensa_opcode_num_operands (isa, opcode) > MAX_INSN_ARGS) as_fatal (_("too many operands in instruction")); opi->narrowest = XTENSA_UNDEFINED; opi->narrowest_size = 0x7F; @@ -10915,7 +12325,6 @@ xg_get_single_slot (xtensa_opcode opcode) void istack_init (IStack *stack) { - memset (stack, 0, sizeof (IStack)); stack->ninsn = 0; } @@ -10941,7 +12350,7 @@ TInsn * istack_top (IStack *stack) { int rec = stack->ninsn - 1; - assert (!istack_empty (stack)); + gas_assert (!istack_empty (stack)); return &stack->insn[rec]; } @@ -10953,7 +12362,7 @@ void istack_push (IStack *stack, TInsn *insn) { int rec = stack->ninsn; - assert (!istack_full (stack)); + gas_assert (!istack_full (stack)); stack->insn[rec] = *insn; stack->ninsn++; } @@ -10967,9 +12376,9 @@ istack_push_space (IStack *stack) { int rec = stack->ninsn; TInsn *insn; - assert (!istack_full (stack)); + gas_assert (!istack_full (stack)); insn = &stack->insn[rec]; - memset (insn, 0, sizeof (TInsn)); + tinsn_init (insn); stack->ninsn++; return insn; } @@ -10982,9 +12391,9 @@ void istack_pop (IStack *stack) { int rec = stack->ninsn - 1; - assert (!istack_empty (stack)); + gas_assert (!istack_empty (stack)); stack->ninsn--; - memset (&stack->insn[rec], 0, sizeof (TInsn)); + tinsn_init (&stack->insn[rec]); } @@ -10997,17 +12406,6 @@ tinsn_init (TInsn *dst) } -/* Get the ``num''th token of the TInsn. - It is illegal to call this if num > insn->ntoks. */ - -expressionS * -tinsn_get_tok (TInsn *insn, int num) -{ - assert (num < insn->ntok); - return &insn->tok[num]; -} - - /* Return TRUE if ANY of the operands in the insn are symbolic. */ static bfd_boolean @@ -11016,7 +12414,7 @@ tinsn_has_symbolic_operands (const TInsn *insn) int i; int n = insn->ntok; - assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->insn_type == ITYPE_INSN); for (i = 0; i < n; ++i) { @@ -11040,7 +12438,7 @@ tinsn_has_invalid_symbolic_operands (const TInsn *insn) int i; int n = insn->ntok; - assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->insn_type == ITYPE_INSN); for (i = 0; i < n; ++i) { @@ -11084,7 +12482,7 @@ tinsn_has_complex_operands (const TInsn *insn) { int i; int n = insn->ntok; - assert (insn->insn_type == ITYPE_INSN); + gas_assert (insn->insn_type == ITYPE_INSN); for (i = 0; i < n; ++i) { switch (insn->tok[i].X_op) @@ -11123,7 +12521,7 @@ tinsn_to_slotbuf (xtensa_format fmt, int noperands = xtensa_opcode_num_operands (isa, opcode); int i; - assert (tinsn->insn_type == ITYPE_INSN); + gas_assert (tinsn->insn_type == ITYPE_INSN); if (noperands != tinsn->ntok) as_fatal (_("operand number mismatch")); @@ -11136,20 +12534,20 @@ tinsn_to_slotbuf (xtensa_format fmt, for (i = 0; i < noperands; i++) { - expressionS *expr = &tinsn->tok[i]; + expressionS *exp = &tinsn->tok[i]; int rc; unsigned line; - char *file_name; + const char *file_name; uint32 opnd_value; - switch (expr->X_op) + switch (exp->X_op) { case O_register: if (xtensa_operand_is_visible (isa, opcode, i) == 0) break; /* The register number has already been checked in expression_maybe_register, so we don't need to check here. */ - opnd_value = expr->X_add_number; + opnd_value = exp->X_add_number; (void) xtensa_operand_encode (isa, opcode, i, &opnd_value); rc = xtensa_operand_set_field (isa, opcode, i, fmt, slot, slotbuf, opnd_value); @@ -11160,11 +12558,11 @@ tinsn_to_slotbuf (xtensa_format fmt, case O_constant: if (xtensa_operand_is_visible (isa, opcode, i) == 0) break; - as_where (&file_name, &line); + file_name = as_where (&line); /* It is a constant and we called this function then we have to try to fit it. */ xtensa_insnbuf_set_operand (slotbuf, fmt, slot, opcode, i, - expr->X_add_number, file_name, line); + exp->X_add_number, file_name, line); break; default: @@ -11222,6 +12620,12 @@ tinsn_check_arguments (const TInsn *insn) { xtensa_isa isa = xtensa_default_isa; xtensa_opcode opcode = insn->opcode; + xtensa_regfile t1_regfile, t2_regfile; + int t1_reg, t2_reg; + int t1_base_reg, t1_last_reg; + int t2_base_reg, t2_last_reg; + char t1_inout, t2_inout; + int i, j; if (opcode == XTENSA_UNDEFINED) { @@ -11240,6 +12644,54 @@ tinsn_check_arguments (const TInsn *insn) as_bad (_("too many operands")); return TRUE; } + + /* Check registers. */ + for (j = 0; j < insn->ntok; j++) + { + if (xtensa_operand_is_register (isa, insn->opcode, j) != 1) + continue; + + t2_regfile = xtensa_operand_regfile (isa, insn->opcode, j); + t2_base_reg = insn->tok[j].X_add_number; + t2_last_reg + = t2_base_reg + xtensa_operand_num_regs (isa, insn->opcode, j); + + for (i = 0; i < insn->ntok; i++) + { + if (i == j) + continue; + + if (xtensa_operand_is_register (isa, insn->opcode, i) != 1) + continue; + + t1_regfile = xtensa_operand_regfile (isa, insn->opcode, i); + + if (t1_regfile != t2_regfile) + continue; + + t1_inout = xtensa_operand_inout (isa, insn->opcode, i); + t2_inout = xtensa_operand_inout (isa, insn->opcode, j); + + t1_base_reg = insn->tok[i].X_add_number; + t1_last_reg = (t1_base_reg + + xtensa_operand_num_regs (isa, insn->opcode, i)); + + for (t1_reg = t1_base_reg; t1_reg < t1_last_reg; t1_reg++) + { + for (t2_reg = t2_base_reg; t2_reg < t2_last_reg; t2_reg++) + { + if (t1_reg != t2_reg) + continue; + + if (t1_inout != 'i' && t2_inout != 'i') + { + as_bad (_("multiple writes to the same register")); + return TRUE; + } + } + } + } + } return FALSE; } @@ -11294,11 +12746,12 @@ tinsn_immed_from_frag (TInsn *tinsn, fragS *fragP, int slot) if (fragP->tc_frag_data.slot_symbols[slot]) { opnum = get_relaxable_immed (opcode); - assert (opnum >= 0); + gas_assert (opnum >= 0); set_expr_symbol_offset (&tinsn->tok[opnum], fragP->tc_frag_data.slot_symbols[slot], fragP->tc_frag_data.slot_offsets[slot]); } + tinsn->extra_arg = fragP->tc_frag_data.free_reg[slot]; } @@ -11348,7 +12801,7 @@ xg_init_vinsn (vliw_insn *v) if (v->insnbuf == NULL) as_fatal (_("out of memory")); - for (i = 0; i < MAX_SLOTS; i++) + for (i = 0; i < config_max_slots; i++) { v->slotbuf[i] = xtensa_insnbuf_alloc (isa); if (v->slotbuf[i] == NULL) @@ -11362,7 +12815,8 @@ xg_clear_vinsn (vliw_insn *v) { int i; - memset (v, 0, offsetof (vliw_insn, insnbuf)); + memset (v, 0, offsetof (vliw_insn, slots) + + sizeof(TInsn) * config_max_slots); v->format = XTENSA_UNDEFINED; v->num_slots = 0; @@ -11371,11 +12825,21 @@ xg_clear_vinsn (vliw_insn *v) if (xt_saved_debug_type != DEBUG_NONE) debug_type = xt_saved_debug_type; - for (i = 0; i < MAX_SLOTS; i++) + for (i = 0; i < config_max_slots; i++) v->slots[i].opcode = XTENSA_UNDEFINED; } +static void +xg_copy_vinsn (vliw_insn *dst, vliw_insn *src) +{ + memcpy (dst, src, + offsetof(vliw_insn, slots) + src->num_slots * sizeof(TInsn)); + dst->insnbuf = src->insnbuf; + memcpy (dst->slotbuf, src->slotbuf, src->num_slots * sizeof(xtensa_insnbuf)); +} + + static bfd_boolean vinsn_has_specific_opcodes (vliw_insn *v) { @@ -11395,7 +12859,7 @@ xg_free_vinsn (vliw_insn *v) { int i; xtensa_insnbuf_free (xtensa_default_isa, v->insnbuf); - for (i = 0; i < MAX_SLOTS; i++) + for (i = 0; i < config_max_slots; i++) xtensa_insnbuf_free (xtensa_default_isa, v->slotbuf[i]); } @@ -11420,12 +12884,29 @@ vinsn_to_insnbuf (vliw_insn *vinsn, for (slot = 0; slot < vinsn->num_slots; slot++) { TInsn *tinsn = &vinsn->slots[slot]; + expressionS *extra_arg = &tinsn->extra_arg; bfd_boolean tinsn_has_fixup = tinsn_to_slotbuf (vinsn->format, slot, tinsn, vinsn->slotbuf[slot]); xtensa_format_set_slot (isa, fmt, slot, insnbuf, vinsn->slotbuf[slot]); + if (extra_arg->X_op != O_illegal && extra_arg->X_op != O_register) + { + if (vinsn->num_slots != 1) + as_bad (_("TLS relocation not allowed in FLIX bundle")); + else if (record_fixup) + /* Instructions that generate TLS relocations should always be + relaxed in the front-end. If "record_fixup" is set, then this + function is being called during back-end relaxation, so flag + the unexpected behavior as an error. */ + as_bad (_("unexpected TLS relocation")); + else + fix_new (fragP, frag_offset - fragP->fr_literal, + xtensa_format_length (isa, fmt), + extra_arg->X_add_symbol, extra_arg->X_add_number, + FALSE, map_operator_to_reloc (extra_arg->X_op, FALSE)); + } if (tinsn_has_fixup) { int i; @@ -11435,8 +12916,8 @@ vinsn_to_insnbuf (vliw_insn *vinsn, for (i = 0; i < noperands; i++) { - expressionS* expr = &tinsn->tok[i]; - switch (expr->X_op) + expressionS* exp = &tinsn->tok[i]; + switch (exp->X_op) { case O_symbol: case O_lo16: @@ -11451,15 +12932,15 @@ vinsn_to_insnbuf (vliw_insn *vinsn, || tinsn->is_specific_opcode || !xg_is_relaxable_insn (tinsn, 0)) { - xg_add_opcode_fix (tinsn, i, fmt, slot, expr, fragP, + xg_add_opcode_fix (tinsn, i, fmt, slot, exp, fragP, frag_offset - fragP->fr_literal); } else { - if (expr->X_op != O_symbol) + if (exp->X_op != O_symbol) as_bad (_("invalid operand")); - tinsn->symbol = expr->X_add_symbol; - tinsn->offset = expr->X_add_number; + tinsn->symbol = exp->X_add_symbol; + tinsn->offset = exp->X_add_number; } } else @@ -11530,7 +13011,7 @@ expr_is_const (const expressionS *s) offsetT get_expr_const (const expressionS *s) { - assert (expr_is_const (s)); + gas_assert (expr_is_const (s)); return s->X_add_number; } @@ -11560,7 +13041,7 @@ expr_is_register (const expressionS *s) offsetT get_expr_register (const expressionS *s) { - assert (expr_is_register (s)); + gas_assert (expr_is_register (s)); return s->X_add_number; } @@ -11605,7 +13086,7 @@ copy_expr (expressionS *dst, const expressionS *src) struct rename_section_struct { - char *old_name; + const char *old_name; char *new_name; struct rename_section_struct *next; }; @@ -11667,8 +13148,7 @@ build_section_rename (const char *arg) } /* Now add it. */ - r = (struct rename_section_struct *) - xmalloc (sizeof (struct rename_section_struct)); + r = XNEW (struct rename_section_struct); r->old_name = xstrdup (old_name); r->new_name = xstrdup (new_name); r->next = section_rename; @@ -11678,7 +13158,7 @@ build_section_rename (const char *arg) char * -xtensa_section_rename (char *name) +xtensa_section_rename (const char *name) { struct rename_section_struct *r = section_rename; @@ -11688,5 +13168,5 @@ xtensa_section_rename (char *name) return r->new_name; } - return name; + return (char *) name; }