X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=gdb%2Finf-loop.c;h=2591ae989ae0c3776455b6c4bd8581bb551d639c;hb=86d8a84882643db4d8c28cea8e4a358465cb11f5;hp=670b966e7a6b3df0706686dd94ac023ad142701f;hpb=a4f2ce052b4e6db6469ff3a0fb3bbee55c24662d;p=deliverable%2Fbinutils-gdb.git

diff --git a/gdb/inf-loop.c b/gdb/inf-loop.c
index 670b966e7a..2591ae989a 100644
--- a/gdb/inf-loop.c
+++ b/gdb/inf-loop.c
@@ -1,6 +1,5 @@
 /* Handling of inferior events for the event loop for GDB, the GNU debugger.
-   Copyright (C) 1999, 2007, 2008, 2009, 2010, 2011
-   Free Software Foundation, Inc.
+   Copyright (C) 1999-2016 Free Software Foundation, Inc.
    Written by Elena Zannoni <ezannoni@cygnus.com> of Cygnus Solutions.
 
    This file is part of GDB.
@@ -19,139 +18,70 @@
    along with this program.  If not, see <http://www.gnu.org/licenses/>.  */
 
 #include "defs.h"
-#include "inferior.h"		/* For fetch_inferior_event.  */
+#include "inferior.h"
+#include "infrun.h"
 #include "target.h"             /* For enum inferior_event_type.  */
 #include "event-loop.h"
 #include "event-top.h"
 #include "inf-loop.h"
 #include "remote.h"
-#include "exceptions.h"
 #include "language.h"
 #include "gdbthread.h"
 #include "continuations.h"
+#include "interps.h"
+#include "top.h"
+#include "observer.h"
 
-static int fetch_inferior_event_wrapper (gdb_client_data client_data);
+/* General function to handle events in the inferior.  */
 
-/* General function to handle events in the inferior.  So far it just
-   takes care of detecting errors reported by select() or poll(),
-   otherwise it assumes that all is OK, and goes on reading data from
-   the fd.  This however may not always be what we want to do.  */
 void
 inferior_event_handler (enum inferior_event_type event_type, 
 			gdb_client_data client_data)
 {
-  struct gdb_exception e;
-  int was_sync = 0;
-  struct cleanup *cleanup_if_error = make_bpstat_clear_actions_cleanup ();
-
   switch (event_type)
     {
     case INF_REG_EVENT:
-      /* Use catch errors for now, until the inner layers of
-	 fetch_inferior_event (i.e. readchar) can return meaningful
-	 error status.  If an error occurs while getting an event from
-	 the target, just cancel the current command.  */
-      if (!catch_errors (fetch_inferior_event_wrapper, 
-			 client_data, "", RETURN_MASK_ALL))
-	{
-	  bpstat_clear_actions ();
-	  do_all_intermediate_continuations (1);
-	  do_all_continuations (1);
-	  async_enable_stdin ();
-	  display_gdb_prompt (0);
-	}
+      fetch_inferior_event (client_data);
       break;
 
     case INF_EXEC_COMPLETE:
-
       if (!non_stop)
 	{
 	  /* Unregister the inferior from the event loop.  This is done
 	     so that when the inferior is not running we don't get
 	     distracted by spurious inferior output.  */
-	  if (target_has_execution)
-	    target_async (NULL, 0);
+	  if (target_has_execution && target_can_async_p ())
+	    target_async (0);
 	}
 
-      /* The call to async_enable_stdin below resets 'sync_execution'.
-	 However, if sync_execution is 1 now, we also need to show the
-	 prompt below, so save the current value.  */
-      was_sync = sync_execution;
-      async_enable_stdin ();
-
       /* Do all continuations associated with the whole inferior (not
 	 a particular thread).  */
       if (!ptid_equal (inferior_ptid, null_ptid))
 	do_all_inferior_continuations (0);
 
-      /* If we were doing a multi-step (eg: step n, next n), but it
-	 got interrupted by a breakpoint, still do the pending
-	 continuations.  The continuation itself is responsible for
-	 distinguishing the cases.  The continuations are allowed to
-	 touch the inferior memory, e.g. to remove breakpoints, so run
-	 them before running breakpoint commands, which may resume the
-	 target.  */
-      if (non_stop
-	  && target_has_execution
-	  && !ptid_equal (inferior_ptid, null_ptid))
-	do_all_intermediate_continuations_thread (inferior_thread (), 0);
-      else
-	do_all_intermediate_continuations (0);
-
-      /* Always finish the previous command before running any
-	 breakpoint commands.  Any stop cancels the previous command.
-	 E.g. a "finish" or "step-n" command interrupted by an
-	 unrelated breakpoint is canceled.  */
-      if (non_stop
-	  && target_has_execution
-	  && !ptid_equal (inferior_ptid, null_ptid))
-	do_all_continuations_thread (inferior_thread (), 0);
-      else
-	do_all_continuations (0);
-
-      if (info_verbose
-	  && current_language != expected_language
-	  && language_mode == language_mode_auto)
-	language_info (1);	/* Print what changed.  */
-
-      /* Don't propagate breakpoint commands errors.  Either we're
-	 stopping or some command resumes the inferior.  The user will
-	 be informed.  */
-      TRY_CATCH (e, RETURN_MASK_ALL)
+      /* When running a command list (from a user command, say), these
+	 are only run when the command list is all done.  */
+      if (interpreter_async)
 	{
-	  bpstat_do_actions ();
+	  check_frame_language_change ();
+
+	  /* Don't propagate breakpoint commands errors.  Either we're
+	     stopping or some command resumes the inferior.  The user will
+	     be informed.  */
+	  TRY
+	    {
+	      bpstat_do_actions ();
+	    }
+	  CATCH (e, RETURN_MASK_ALL)
+	    {
+	      exception_print (gdb_stderr, e);
+	    }
+	  END_CATCH
 	}
-      exception_print (gdb_stderr, e);
-
-      if (!was_sync
-	  && exec_done_display_p
-	  && (ptid_equal (inferior_ptid, null_ptid)
-	      || !is_running (inferior_ptid)))
-	printf_unfiltered (_("completed.\n"));
-      break;
-
-    case INF_EXEC_CONTINUE:
-      /* Is there anything left to do for the command issued to
-         complete?  */
-
-      if (non_stop)
-	do_all_intermediate_continuations_thread (inferior_thread (), 0);
-      else
-	do_all_intermediate_continuations (0);
       break;
 
-    case INF_TIMER:
     default:
       printf_unfiltered (_("Event type not recognized.\n"));
       break;
     }
-
-  discard_cleanups (cleanup_if_error);
-}
-
-static int 
-fetch_inferior_event_wrapper (gdb_client_data client_data)
-{
-  fetch_inferior_event (client_data);
-  return 1;
 }