X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=gdb%2Fmips-tdep.c;h=ff8669252aa31fcb39b827449649b72bafdfdcc6;hb=3be60c3d274d8a95d1e3c579c26140177b711d74;hp=a98dd3c7d636e183badb6ad8cb9e9bf7950b6c62;hpb=b2fa5097bff05f4e808bb384835340cd44afefe3;p=deliverable%2Fbinutils-gdb.git diff --git a/gdb/mips-tdep.c b/gdb/mips-tdep.c index a98dd3c7d6..ff8669252a 100644 --- a/gdb/mips-tdep.c +++ b/gdb/mips-tdep.c @@ -1,8 +1,8 @@ /* Target-dependent code for the MIPS architecture, for GDB, the GNU Debugger. Copyright 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996, - 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Free Software - Foundation, Inc. + 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 + Free Software Foundation, Inc. Contributed by Alessandro Forin(af@cs.cmu.edu) at CMU and by Per Bothner(bothner@cs.wisc.edu) at U.Wisconsin. @@ -54,13 +54,13 @@ #include "frame-base.h" #include "trad-frame.h" #include "infcall.h" +#include "floatformat.h" static const struct objfile_data *mips_pdr_data; -static void set_reg_offset (CORE_ADDR *saved_regs, int regnum, CORE_ADDR off); static struct type *mips_register_type (struct gdbarch *gdbarch, int regnum); -/* A useful bit in the CP0 status register (PS_REGNUM). */ +/* A useful bit in the CP0 status register (MIPS_PS_REGNUM). */ /* This bit is set if we are emulating 32-bit FPRs on a 64-bit chip. */ #define ST0_FR (1 << 26) @@ -86,12 +86,6 @@ static const char *mips_abi_strings[] = { NULL }; -struct frame_extra_info -{ - mips_extra_func_info_t proc_desc; - int num_args; -}; - /* Various MIPS ISA options (related to stack analysis) can be overridden dynamically. Establish an enum/array for managing them. */ @@ -149,6 +143,32 @@ struct gdbarch_tdep const char **mips_processor_reg_names; }; +static int +n32n64_floatformat_always_valid (const struct floatformat *fmt, + const char *from) +{ + return 1; +} + +/* FIXME: brobecker/2004-08-08: Long Double values are 128 bit long. + They are implemented as a pair of 64bit doubles where the high + part holds the result of the operation rounded to double, and + the low double holds the difference between the exact result and + the rounded result. So "high" + "low" contains the result with + added precision. Unfortunately, the floatformat structure used + by GDB is not powerful enough to describe this format. As a temporary + measure, we define a 128bit floatformat that only uses the high part. + We lose a bit of precision but that's probably the best we can do + for now with the current infrastructure. */ + +static const struct floatformat floatformat_n32n64_long_double_big = +{ + floatformat_big, 128, 0, 1, 11, 1023, 2047, 12, 52, + floatformat_intbit_no, + "floatformat_ieee_double_big", + n32n64_floatformat_always_valid +}; + const struct mips_regnum * mips_regnum (struct gdbarch *gdbarch) { @@ -179,12 +199,6 @@ is_mips16_addr (CORE_ADDR addr) return ((addr) & 1); } -static CORE_ADDR -make_mips16_addr (CORE_ADDR addr) -{ - return ((addr) | 1); -} - static CORE_ADDR unmake_mips16_addr (CORE_ADDR addr) { @@ -196,10 +210,9 @@ unmake_mips16_addr (CORE_ADDR addr) static LONGEST read_signed_register (int regnum) { - void *buf = alloca (register_size (current_gdbarch, regnum)); - deprecated_read_register_gen (regnum, buf); - return (extract_signed_integer - (buf, register_size (current_gdbarch, regnum))); + LONGEST val; + regcache_cooked_read_signed (current_regcache, regnum, &val); + return val; } static LONGEST @@ -240,7 +253,7 @@ mips_isa_regsize (struct gdbarch *gdbarch) static const char *mips_abi_regsize_string = size_auto; -static unsigned int +unsigned int mips_abi_regsize (struct gdbarch *gdbarch) { if (mips_abi_regsize_string == size_auto) @@ -257,7 +270,7 @@ mips_abi_regsize (struct gdbarch *gdbarch) case MIPS_ABI_UNKNOWN: case MIPS_ABI_LAST: default: - internal_error (__FILE__, __LINE__, "bad switch"); + internal_error (__FILE__, __LINE__, _("bad switch")); } else if (mips_abi_regsize_string == size_64) return 8; @@ -318,7 +331,7 @@ mips_xfer_register (struct regcache *regcache, int reg_num, int length, reg_offset = 0; break; default: - internal_error (__FILE__, __LINE__, "bad switch"); + internal_error (__FILE__, __LINE__, _("bad switch")); } if (mips_debug) fprintf_unfiltered (gdb_stderr, @@ -367,7 +380,7 @@ mips2_fp_compat (void) /* Otherwise check the FR bit in the status register - it controls the FP compatiblity mode. If it is clear we are in compatibility mode. */ - if ((read_register (PS_REGNUM) & ST0_FR) == 0) + if ((read_register (MIPS_PS_REGNUM) & ST0_FR) == 0) return 1; #endif @@ -393,22 +406,12 @@ mips_stack_argsize (struct gdbarch *gdbarch) #define VM_MIN_ADDRESS (CORE_ADDR)0x400000 -static mips_extra_func_info_t heuristic_proc_desc (CORE_ADDR, CORE_ADDR, - struct frame_info *, int); - static CORE_ADDR heuristic_proc_start (CORE_ADDR); static CORE_ADDR read_next_frame_reg (struct frame_info *, int); static void reinit_frame_cache_sfunc (char *, int, struct cmd_list_element *); -static mips_extra_func_info_t find_proc_desc (CORE_ADDR pc, - struct frame_info *next_frame, - int cur_frame); - -static CORE_ADDR after_prologue (CORE_ADDR pc, - mips_extra_func_info_t proc_desc); - static struct type *mips_float_register_type (void); static struct type *mips_double_register_type (void); @@ -519,7 +522,7 @@ mips_register_name (int regno) } else internal_error (__FILE__, __LINE__, - "mips_register_name: bad register number %d", rawnum); + _("mips_register_name: bad register number %d"), rawnum); } /* Return the groups that a MIPS register can be categorised into. */ @@ -565,7 +568,7 @@ mips_register_reggroup_p (struct gdbarch *gdbarch, int regnum, static void mips_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache, - int cookednum, void *buf) + int cookednum, gdb_byte *buf) { int rawnum = cookednum % NUM_REGS; gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS); @@ -581,13 +584,13 @@ mips_pseudo_register_read (struct gdbarch *gdbarch, struct regcache *regcache, regcache_raw_read_part (regcache, rawnum, 4, 4, buf); } else - internal_error (__FILE__, __LINE__, "bad register size"); + internal_error (__FILE__, __LINE__, _("bad register size")); } static void mips_pseudo_register_write (struct gdbarch *gdbarch, struct regcache *regcache, int cookednum, - const void *buf) + const gdb_byte *buf) { int rawnum = cookednum % NUM_REGS; gdb_assert (cookednum >= NUM_REGS && cookednum < 2 * NUM_REGS); @@ -603,7 +606,7 @@ mips_pseudo_register_write (struct gdbarch *gdbarch, regcache_raw_write_part (regcache, rawnum, 4, 4, buf); } else - internal_error (__FILE__, __LINE__, "bad register size"); + internal_error (__FILE__, __LINE__, _("bad register size")); } /* Table to translate MIPS16 register field to actual register number. */ @@ -615,30 +618,6 @@ static int mips16_to_32_reg[8] = { 16, 17, 2, 3, 4, 5, 6, 7 }; static unsigned int heuristic_fence_post = 0; -#define PROC_LOW_ADDR(proc) ((proc)->pdr.adr) /* least address */ -#define PROC_HIGH_ADDR(proc) ((proc)->high_addr) /* upper address bound */ -#define PROC_FRAME_OFFSET(proc) ((proc)->pdr.frameoffset) -#define PROC_FRAME_REG(proc) ((proc)->pdr.framereg) -#define PROC_FRAME_ADJUST(proc) ((proc)->frame_adjust) -#define PROC_REG_MASK(proc) ((proc)->pdr.regmask) -#define PROC_FREG_MASK(proc) ((proc)->pdr.fregmask) -#define PROC_REG_OFFSET(proc) ((proc)->pdr.regoffset) -#define PROC_FREG_OFFSET(proc) ((proc)->pdr.fregoffset) -#define PROC_PC_REG(proc) ((proc)->pdr.pcreg) -/* FIXME drow/2002-06-10: If a pointer on the host is bigger than a long, - this will corrupt pdr.iline. Fortunately we don't use it. */ -#define PROC_SYMBOL(proc) (*(struct symbol**)&(proc)->pdr.isym) -#define _PROC_MAGIC_ 0x0F0F0F0F -#define PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym == _PROC_MAGIC_) -#define SET_PROC_DESC_IS_DUMMY(proc) ((proc)->pdr.isym = _PROC_MAGIC_) - -struct linked_proc_info -{ - struct mips_extra_func_info info; - struct linked_proc_info *next; -} - *linked_proc_desc_table = NULL; - /* Number of bytes of storage in the actual machine representation for register N. NOTE: This defines the pseudo register type so need to rebuild the architecture vector. */ @@ -657,7 +636,7 @@ set_mips64_transfers_32bit_regs (char *args, int from_tty, if (!gdbarch_update_p (info)) { mips64_transfers_32bit_regs_p = 0; - error ("32-bit compatibility mode not supported"); + error (_("32-bit compatibility mode not supported")); } } @@ -675,18 +654,18 @@ mips_convert_register_p (int regnum, struct type *type) static void mips_register_to_value (struct frame_info *frame, int regnum, - struct type *type, void *to) + struct type *type, gdb_byte *to) { - get_frame_register (frame, regnum + 0, (char *) to + 4); - get_frame_register (frame, regnum + 1, (char *) to + 0); + get_frame_register (frame, regnum + 0, to + 4); + get_frame_register (frame, regnum + 1, to + 0); } static void mips_value_to_register (struct frame_info *frame, int regnum, - struct type *type, const void *from) + struct type *type, const gdb_byte *from) { - put_frame_register (frame, regnum + 0, (const char *) from + 4); - put_frame_register (frame, regnum + 1, (const char *) from + 0); + put_frame_register (frame, regnum + 0, from + 4); + put_frame_register (frame, regnum + 1, from + 0); } /* Return the GDB type object for the "standard" data type of data in @@ -715,7 +694,7 @@ mips_register_type (struct gdbarch *gdbarch, int regnum) return builtin_type_ieee_double_little; case BFD_ENDIAN_UNKNOWN: default: - internal_error (__FILE__, __LINE__, "bad switch"); + internal_error (__FILE__, __LINE__, _("bad switch")); } } else if (regnum < NUM_REGS) @@ -733,7 +712,7 @@ mips_register_type (struct gdbarch *gdbarch, int regnum) the ABI (with a few complications). */ if (regnum >= (NUM_REGS + mips_regnum (current_gdbarch)->fp_control_status) - && regnum <= NUM_REGS + LAST_EMBED_REGNUM) + && regnum <= NUM_REGS + MIPS_LAST_EMBED_REGNUM) /* The pseudo/cooked view of the embedded registers is always 32-bit. The raw view is handled below. */ return builtin_type_int32; @@ -776,15 +755,18 @@ mips_mask_address_p (struct gdbarch_tdep *tdep) case AUTO_BOOLEAN_AUTO: return tdep->default_mask_address_p; default: - internal_error (__FILE__, __LINE__, "mips_mask_address_p: bad switch"); + internal_error (__FILE__, __LINE__, _("mips_mask_address_p: bad switch")); return -1; } } static void -show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c) +show_mask_address (struct ui_file *file, int from_tty, + struct cmd_list_element *c, const char *value) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); + + deprecated_show_value_hack (file, from_tty, c, value); switch (mask_address_var) { case AUTO_BOOLEAN_TRUE: @@ -799,15 +781,15 @@ show_mask_address (char *cmd, int from_tty, struct cmd_list_element *c) mips_mask_address_p (tdep) ? "enabled" : "disabled"); break; default: - internal_error (__FILE__, __LINE__, "show_mask_address: bad switch"); + internal_error (__FILE__, __LINE__, _("show_mask_address: bad switch")); break; } } /* Tell if the program counter value in MEMADDR is in a MIPS16 function. */ -static int -pc_is_mips16 (bfd_vma memaddr) +int +mips_pc_is_mips16 (CORE_ADDR memaddr) { struct minimal_symbol *sym; @@ -859,155 +841,29 @@ mips_write_pc (CORE_ADDR pc, ptid_t ptid) write_register_pid (mips_regnum (current_gdbarch)->pc, pc, ptid); } -/* This returns the PC of the first inst after the prologue. If we can't - find the prologue, then return 0. */ - -static CORE_ADDR -after_prologue (CORE_ADDR pc, mips_extra_func_info_t proc_desc) -{ - struct symtab_and_line sal; - CORE_ADDR func_addr, func_end; - - /* Pass cur_frame == 0 to find_proc_desc. We should not attempt - to read the stack pointer from the current machine state, because - the current machine state has nothing to do with the information - we need from the proc_desc; and the process may or may not exist - right now. */ - if (!proc_desc) - proc_desc = find_proc_desc (pc, NULL, 0); - - if (proc_desc) - { - /* If function is frameless, then we need to do it the hard way. I - strongly suspect that frameless always means prologueless... */ - if (PROC_FRAME_REG (proc_desc) == MIPS_SP_REGNUM - && PROC_FRAME_OFFSET (proc_desc) == 0) - return 0; - } - - if (!find_pc_partial_function (pc, NULL, &func_addr, &func_end)) - return 0; /* Unknown */ - - sal = find_pc_line (func_addr, 0); - - if (sal.end < func_end) - return sal.end; - - /* The line after the prologue is after the end of the function. In this - case, tell the caller to find the prologue the hard way. */ - - return 0; -} - -/* Decode a MIPS32 instruction that saves a register in the stack, and - set the appropriate bit in the general register mask or float register mask - to indicate which register is saved. This is a helper function - for mips_find_saved_regs. */ - -static void -mips32_decode_reg_save (t_inst inst, unsigned long *gen_mask, - unsigned long *float_mask) -{ - int reg; - - if ((inst & 0xffe00000) == 0xafa00000 /* sw reg,n($sp) */ - || (inst & 0xffe00000) == 0xafc00000 /* sw reg,n($r30) */ - || (inst & 0xffe00000) == 0xffa00000) /* sd reg,n($sp) */ - { - /* It might be possible to use the instruction to - find the offset, rather than the code below which - is based on things being in a certain order in the - frame, but figuring out what the instruction's offset - is relative to might be a little tricky. */ - reg = (inst & 0x001f0000) >> 16; - *gen_mask |= (1 << reg); - } - else if ((inst & 0xffe00000) == 0xe7a00000 /* swc1 freg,n($sp) */ - || (inst & 0xffe00000) == 0xe7c00000 /* swc1 freg,n($r30) */ - || (inst & 0xffe00000) == 0xf7a00000) /* sdc1 freg,n($sp) */ - - { - reg = ((inst & 0x001f0000) >> 16); - *float_mask |= (1 << reg); - } -} - -/* Decode a MIPS16 instruction that saves a register in the stack, and - set the appropriate bit in the general register or float register mask - to indicate which register is saved. This is a helper function - for mips_find_saved_regs. */ - -static void -mips16_decode_reg_save (t_inst inst, unsigned long *gen_mask) -{ - if ((inst & 0xf800) == 0xd000) /* sw reg,n($sp) */ - { - int reg = mips16_to_32_reg[(inst & 0x700) >> 8]; - *gen_mask |= (1 << reg); - } - else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */ - { - int reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; - *gen_mask |= (1 << reg); - } - else if ((inst & 0xff00) == 0x6200 /* sw $ra,n($sp) */ - || (inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */ - *gen_mask |= (1 << RA_REGNUM); -} - - /* Fetch and return instruction from the specified location. If the PC is odd, assume it's a MIPS16 instruction; otherwise MIPS32. */ -static t_inst +static ULONGEST mips_fetch_instruction (CORE_ADDR addr) { - char buf[MIPS_INSTLEN]; + gdb_byte buf[MIPS_INSN32_SIZE]; int instlen; int status; - if (pc_is_mips16 (addr)) + if (mips_pc_is_mips16 (addr)) { - instlen = MIPS16_INSTLEN; + instlen = MIPS_INSN16_SIZE; addr = unmake_mips16_addr (addr); } else - instlen = MIPS_INSTLEN; - status = read_memory_nobpt (addr, buf, instlen); - if (status) - memory_error (status, addr); - return extract_unsigned_integer (buf, instlen); -} - -static ULONGEST -mips16_fetch_instruction (CORE_ADDR addr) -{ - char buf[MIPS_INSTLEN]; - int instlen; - int status; - - instlen = MIPS16_INSTLEN; - addr = unmake_mips16_addr (addr); - status = read_memory_nobpt (addr, buf, instlen); - if (status) - memory_error (status, addr); - return extract_unsigned_integer (buf, instlen); -} - -static ULONGEST -mips32_fetch_instruction (CORE_ADDR addr) -{ - char buf[MIPS_INSTLEN]; - int instlen; - int status; - instlen = MIPS_INSTLEN; - status = read_memory_nobpt (addr, buf, instlen); + instlen = MIPS_INSN32_SIZE; + status = deprecated_read_memory_nobpt (addr, buf, instlen); if (status) memory_error (status, addr); return extract_unsigned_integer (buf, instlen); } - /* These the fields of 32 bit mips instructions */ #define mips32_op(x) (x >> 26) #define itype_op(x) (x >> 26) @@ -1025,17 +881,10 @@ mips32_fetch_instruction (CORE_ADDR addr) #define rtype_shamt(x) ((x >> 6) & 0x1f) #define rtype_funct(x) (x & 0x3f) -static CORE_ADDR -mips32_relative_offset (unsigned long inst) +static LONGEST +mips32_relative_offset (ULONGEST inst) { - long x; - x = itype_immediate (inst); - if (x & 0x8000) /* sign bit set */ - { - x |= 0xffff0000; /* sign extension */ - } - x = x << 2; - return x; + return ((itype_immediate (inst) ^ 0x8000) - 0x8000) << 2; } /* Determine whate to set a single step breakpoint while considering @@ -1168,7 +1017,7 @@ mips32_next_pc (CORE_ADDR pc) pc += 8; break; case 6: /* BLEZ, BLEZL */ - if (read_signed_register (itype_rs (inst) <= 0)) + if (read_signed_register (itype_rs (inst)) <= 0) pc += mips32_relative_offset (inst) + 4; else pc += 8; @@ -1176,7 +1025,7 @@ mips32_next_pc (CORE_ADDR pc) case 7: default: greater_branch: /* BGTZ, BGTZL */ - if (read_signed_register (itype_rs (inst) > 0)) + if (read_signed_register (itype_rs (inst)) > 0) pc += mips32_relative_offset (inst) + 4; else pc += 8; @@ -1259,7 +1108,7 @@ extended_offset (unsigned int extension) static unsigned int fetch_mips_16 (CORE_ADDR pc) { - char buf[8]; + gdb_byte buf[8]; pc &= 0xfffffffe; /* clear the low order bit */ target_read_memory (pc, buf, 2); return extract_unsigned_integer (buf, 2); @@ -1342,7 +1191,7 @@ unpack_mips16 (CORE_ADDR pc, break; } default: - internal_error (__FILE__, __LINE__, "bad switch"); + internal_error (__FILE__, __LINE__, _("bad switch")); } upk->offset = offset; upk->regx = regx; @@ -1503,535 +1352,128 @@ struct mips_frame_cache struct trad_frame_saved_reg *saved_regs; }; +/* Set a register's saved stack address in temp_saved_regs. If an + address has already been set for this register, do nothing; this + way we will only recognize the first save of a given register in a + function prologue. -static struct mips_frame_cache * -mips_mdebug_frame_cache (struct frame_info *next_frame, void **this_cache) -{ - mips_extra_func_info_t proc_desc; - struct mips_frame_cache *cache; - struct gdbarch *gdbarch = get_frame_arch (next_frame); - struct gdbarch_tdep *tdep = gdbarch_tdep (gdbarch); - /* r0 bit means kernel trap */ - int kernel_trap; - /* What registers have been saved? Bitmasks. */ - unsigned long gen_mask, float_mask; - - if ((*this_cache) != NULL) - return (*this_cache); - cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache); - (*this_cache) = cache; - cache->saved_regs = trad_frame_alloc_saved_regs (next_frame); - - /* Get the mdebug proc descriptor. */ - proc_desc = find_proc_desc (frame_pc_unwind (next_frame), next_frame, 1); - if (proc_desc == NULL) - /* I'm not sure how/whether this can happen. Normally when we - can't find a proc_desc, we "synthesize" one using - heuristic_proc_desc and set the saved_regs right away. */ - return cache; - - /* Extract the frame's base. */ - cache->base = (frame_unwind_register_signed (next_frame, NUM_REGS + PROC_FRAME_REG (proc_desc)) - + PROC_FRAME_OFFSET (proc_desc) - PROC_FRAME_ADJUST (proc_desc)); - - kernel_trap = PROC_REG_MASK (proc_desc) & 1; - gen_mask = kernel_trap ? 0xFFFFFFFF : PROC_REG_MASK (proc_desc); - float_mask = kernel_trap ? 0xFFFFFFFF : PROC_FREG_MASK (proc_desc); - - /* In any frame other than the innermost or a frame interrupted by a - signal, we assume that all registers have been saved. This - assumes that all register saves in a function happen before the - first function call. */ - if (in_prologue (frame_pc_unwind (next_frame), PROC_LOW_ADDR (proc_desc)) - /* Not sure exactly what kernel_trap means, but if it means the - kernel saves the registers without a prologue doing it, we - better not examine the prologue to see whether registers - have been saved yet. */ - && !kernel_trap) - { - /* We need to figure out whether the registers that the - proc_desc claims are saved have been saved yet. */ - - CORE_ADDR addr; - - /* Bitmasks; set if we have found a save for the register. */ - unsigned long gen_save_found = 0; - unsigned long float_save_found = 0; - int mips16; - - /* If the address is odd, assume this is MIPS16 code. */ - addr = PROC_LOW_ADDR (proc_desc); - mips16 = pc_is_mips16 (addr); - - /* Scan through this function's instructions preceding the - current PC, and look for those that save registers. */ - while (addr < frame_pc_unwind (next_frame)) - { - if (mips16) - { - mips16_decode_reg_save (mips16_fetch_instruction (addr), - &gen_save_found); - addr += MIPS16_INSTLEN; - } - else - { - mips32_decode_reg_save (mips32_fetch_instruction (addr), - &gen_save_found, &float_save_found); - addr += MIPS_INSTLEN; - } - } - gen_mask = gen_save_found; - float_mask = float_save_found; - } - - /* Fill in the offsets for the registers which gen_mask says were - saved. */ - { - CORE_ADDR reg_position = (cache->base - + PROC_REG_OFFSET (proc_desc)); - int ireg; - for (ireg = MIPS_NUMREGS - 1; gen_mask; --ireg, gen_mask <<= 1) - if (gen_mask & 0x80000000) - { - cache->saved_regs[NUM_REGS + ireg].addr = reg_position; - reg_position -= mips_abi_regsize (gdbarch); - } - } - - /* The MIPS16 entry instruction saves $s0 and $s1 in the reverse - order of that normally used by gcc. Therefore, we have to fetch - the first instruction of the function, and if it's an entry - instruction that saves $s0 or $s1, correct their saved addresses. */ - if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc))) - { - ULONGEST inst = mips16_fetch_instruction (PROC_LOW_ADDR (proc_desc)); - if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) - /* entry */ - { - int reg; - int sreg_count = (inst >> 6) & 3; - - /* Check if the ra register was pushed on the stack. */ - CORE_ADDR reg_position = (cache->base - + PROC_REG_OFFSET (proc_desc)); - if (inst & 0x20) - reg_position -= mips_abi_regsize (gdbarch); - - /* Check if the s0 and s1 registers were pushed on the - stack. */ - /* NOTE: cagney/2004-02-08: Huh? This is doing no such - check. */ - for (reg = 16; reg < sreg_count + 16; reg++) - { - cache->saved_regs[NUM_REGS + reg].addr = reg_position; - reg_position -= mips_abi_regsize (gdbarch); - } - } - } - - /* Fill in the offsets for the registers which float_mask says were - saved. */ - { - CORE_ADDR reg_position = (cache->base - + PROC_FREG_OFFSET (proc_desc)); - int ireg; - /* Fill in the offsets for the float registers which float_mask - says were saved. */ - for (ireg = MIPS_NUMREGS - 1; float_mask; --ireg, float_mask <<= 1) - if (float_mask & 0x80000000) - { - if (mips_abi_regsize (gdbarch) == 4 - && TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) - { - /* On a big endian 32 bit ABI, floating point registers - are paired to form doubles such that the most - significant part is in $f[N+1] and the least - significant in $f[N] vis: $f[N+1] ||| $f[N]. The - registers are also spilled as a pair and stored as a - double. - - When little-endian the least significant part is - stored first leading to the memory order $f[N] and - then $f[N+1]. - - Unfortunately, when big-endian the most significant - part of the double is stored first, and the least - significant is stored second. This leads to the - registers being ordered in memory as firt $f[N+1] and - then $f[N]. - - For the big-endian case make certain that the - addresses point at the correct (swapped) locations - $f[N] and $f[N+1] pair (keep in mind that - reg_position is decremented each time through the - loop). */ - if ((ireg & 1)) - cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg] - .addr = reg_position - mips_abi_regsize (gdbarch); - else - cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg] - .addr = reg_position + mips_abi_regsize (gdbarch); - } - else - cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->fp0 + ireg] - .addr = reg_position; - reg_position -= mips_abi_regsize (gdbarch); - } - - cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc] - = cache->saved_regs[NUM_REGS + RA_REGNUM]; - } - - /* SP_REGNUM, contains the value and not the address. */ - trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base); - - return (*this_cache); -} - -static void -mips_mdebug_frame_this_id (struct frame_info *next_frame, void **this_cache, - struct frame_id *this_id) -{ - struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame, - this_cache); - (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame)); -} + For simplicity, save the address in both [0 .. NUM_REGS) and + [NUM_REGS .. 2*NUM_REGS). Strictly speaking, only the second range + is used as it is only second range (the ABI instead of ISA + registers) that comes into play when finding saved registers in a + frame. */ static void -mips_mdebug_frame_prev_register (struct frame_info *next_frame, - void **this_cache, - int regnum, int *optimizedp, - enum lval_type *lvalp, CORE_ADDR *addrp, - int *realnump, void *valuep) -{ - struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame, - this_cache); - trad_frame_prev_register (next_frame, info->saved_regs, regnum, - optimizedp, lvalp, addrp, realnump, valuep); -} - -static const struct frame_unwind mips_mdebug_frame_unwind = -{ - NORMAL_FRAME, - mips_mdebug_frame_this_id, - mips_mdebug_frame_prev_register -}; - -static const struct frame_unwind * -mips_mdebug_frame_sniffer (struct frame_info *next_frame) +set_reg_offset (struct mips_frame_cache *this_cache, int regnum, + CORE_ADDR offset) { - return &mips_mdebug_frame_unwind; + if (this_cache != NULL + && this_cache->saved_regs[regnum].addr == -1) + { + this_cache->saved_regs[regnum + 0 * NUM_REGS].addr = offset; + this_cache->saved_regs[regnum + 1 * NUM_REGS].addr = offset; + } } -static CORE_ADDR -mips_mdebug_frame_base_address (struct frame_info *next_frame, - void **this_cache) -{ - struct mips_frame_cache *info = mips_mdebug_frame_cache (next_frame, - this_cache); - return info->base; -} -static const struct frame_base mips_mdebug_frame_base = { - &mips_mdebug_frame_unwind, - mips_mdebug_frame_base_address, - mips_mdebug_frame_base_address, - mips_mdebug_frame_base_address -}; +/* Fetch the immediate value from a MIPS16 instruction. + If the previous instruction was an EXTEND, use it to extend + the upper bits of the immediate value. This is a helper function + for mips16_scan_prologue. */ -static const struct frame_base * -mips_mdebug_frame_base_sniffer (struct frame_info *next_frame) +static int +mips16_get_imm (unsigned short prev_inst, /* previous instruction */ + unsigned short inst, /* current instruction */ + int nbits, /* number of bits in imm field */ + int scale, /* scale factor to be applied to imm */ + int is_signed) /* is the imm field signed? */ { - return &mips_mdebug_frame_base; -} + int offset; -static CORE_ADDR -read_next_frame_reg (struct frame_info *fi, int regno) -{ - /* Always a pseudo. */ - gdb_assert (regno >= NUM_REGS); - if (fi == NULL) + if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */ { - LONGEST val; - regcache_cooked_read_signed (current_regcache, regno, &val); - return val; + offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0); + if (offset & 0x8000) /* check for negative extend */ + offset = 0 - (0x10000 - (offset & 0xffff)); + return offset | (inst & 0x1f); } - else if ((regno % NUM_REGS) == MIPS_SP_REGNUM) - /* MIPS_SP_REGNUM is special, its value is stored in saved_regs. - In fact, it is so special that it can even only be fetched - using a raw register number! Once this code as been converted - to frame-unwind the problem goes away. */ - return frame_unwind_register_signed (fi, regno % NUM_REGS); else - return frame_unwind_register_signed (fi, regno); + { + int max_imm = 1 << nbits; + int mask = max_imm - 1; + int sign_bit = max_imm >> 1; + offset = inst & mask; + if (is_signed && (offset & sign_bit)) + offset = 0 - (max_imm - offset); + return offset * scale; + } } -/* mips_addr_bits_remove - remove useless address bits */ + +/* Analyze the function prologue from START_PC to LIMIT_PC. Builds + the associated FRAME_CACHE if not null. + Return the address of the first instruction past the prologue. */ static CORE_ADDR -mips_addr_bits_remove (CORE_ADDR addr) +mips16_scan_prologue (CORE_ADDR start_pc, CORE_ADDR limit_pc, + struct frame_info *next_frame, + struct mips_frame_cache *this_cache) { - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - if (mips_mask_address_p (tdep) && (((ULONGEST) addr) >> 32 == 0xffffffffUL)) - /* This hack is a work-around for existing boards using PMON, the - simulator, and any other 64-bit targets that doesn't have true - 64-bit addressing. On these targets, the upper 32 bits of - addresses are ignored by the hardware. Thus, the PC or SP are - likely to have been sign extended to all 1s by instruction - sequences that load 32-bit addresses. For example, a typical - piece of code that loads an address is this: + CORE_ADDR cur_pc; + CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */ + CORE_ADDR sp; + long frame_offset = 0; /* Size of stack frame. */ + long frame_adjust = 0; /* Offset of FP from SP. */ + int frame_reg = MIPS_SP_REGNUM; + unsigned short prev_inst = 0; /* saved copy of previous instruction */ + unsigned inst = 0; /* current instruction */ + unsigned entry_inst = 0; /* the entry instruction */ + int reg, offset; - lui $r2, - ori $r2, + int extend_bytes = 0; + int prev_extend_bytes; + CORE_ADDR end_prologue_addr = 0; - But the lui sign-extends the value such that the upper 32 bits - may be all 1s. The workaround is simply to mask off these - bits. In the future, gcc may be changed to support true 64-bit - addressing, and this masking will have to be disabled. */ - return addr &= 0xffffffffUL; + /* Can be called when there's no process, and hence when there's no + NEXT_FRAME. */ + if (next_frame != NULL) + sp = read_next_frame_reg (next_frame, NUM_REGS + MIPS_SP_REGNUM); else - return addr; -} + sp = 0; -/* mips_software_single_step() is called just before we want to resume - the inferior, if we want to single-step it but there is no hardware - or kernel single-step support (MIPS on GNU/Linux for example). We find - the target of the coming instruction and breakpoint it. + if (limit_pc > start_pc + 200) + limit_pc = start_pc + 200; - single_step is also called just after the inferior stops. If we had - set up a simulated single-step, we undo our damage. */ + for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSN16_SIZE) + { + /* Save the previous instruction. If it's an EXTEND, we'll extract + the immediate offset extension from it in mips16_get_imm. */ + prev_inst = inst; -void -mips_software_single_step (enum target_signal sig, int insert_breakpoints_p) -{ - static CORE_ADDR next_pc; - typedef char binsn_quantum[BREAKPOINT_MAX]; - static binsn_quantum break_mem; - CORE_ADDR pc; - - if (insert_breakpoints_p) - { - pc = read_register (mips_regnum (current_gdbarch)->pc); - next_pc = mips_next_pc (pc); - - target_insert_breakpoint (next_pc, break_mem); - } - else - target_remove_breakpoint (next_pc, break_mem); -} - -static struct mips_extra_func_info temp_proc_desc; - -/* This hack will go away once the get_prev_frame() code has been - modified to set the frame's type first. That is BEFORE init extra - frame info et.al. is called. This is because it will become - possible to skip the init extra info call for sigtramp and dummy - frames. */ -static CORE_ADDR *temp_saved_regs; - -/* Set a register's saved stack address in temp_saved_regs. If an - address has already been set for this register, do nothing; this - way we will only recognize the first save of a given register in a - function prologue. - - For simplicity, save the address in both [0 .. NUM_REGS) and - [NUM_REGS .. 2*NUM_REGS). Strictly speaking, only the second range - is used as it is only second range (the ABI instead of ISA - registers) that comes into play when finding saved registers in a - frame. */ - -static void -set_reg_offset (CORE_ADDR *saved_regs, int regno, CORE_ADDR offset) -{ - if (saved_regs[regno] == 0) - { - saved_regs[regno + 0 * NUM_REGS] = offset; - saved_regs[regno + 1 * NUM_REGS] = offset; - } -} - - -/* Test whether the PC points to the return instruction at the - end of a function. */ - -static int -mips_about_to_return (CORE_ADDR pc) -{ - if (pc_is_mips16 (pc)) - /* This mips16 case isn't necessarily reliable. Sometimes the compiler - generates a "jr $ra"; other times it generates code to load - the return address from the stack to an accessible register (such - as $a3), then a "jr" using that register. This second case - is almost impossible to distinguish from an indirect jump - used for switch statements, so we don't even try. */ - return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */ - else - return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */ -} - - -/* This fencepost looks highly suspicious to me. Removing it also - seems suspicious as it could affect remote debugging across serial - lines. */ - -static CORE_ADDR -heuristic_proc_start (CORE_ADDR pc) -{ - CORE_ADDR start_pc; - CORE_ADDR fence; - int instlen; - int seen_adjsp = 0; - - pc = ADDR_BITS_REMOVE (pc); - start_pc = pc; - fence = start_pc - heuristic_fence_post; - if (start_pc == 0) - return 0; - - if (heuristic_fence_post == UINT_MAX || fence < VM_MIN_ADDRESS) - fence = VM_MIN_ADDRESS; - - instlen = pc_is_mips16 (pc) ? MIPS16_INSTLEN : MIPS_INSTLEN; - - /* search back for previous return */ - for (start_pc -= instlen;; start_pc -= instlen) - if (start_pc < fence) - { - /* It's not clear to me why we reach this point when - stop_soon, but with this test, at least we - don't print out warnings for every child forked (eg, on - decstation). 22apr93 rich@cygnus.com. */ - if (stop_soon == NO_STOP_QUIETLY) - { - static int blurb_printed = 0; - - warning ("GDB can't find the start of the function at 0x%s.", - paddr_nz (pc)); - - if (!blurb_printed) - { - /* This actually happens frequently in embedded - development, when you first connect to a board - and your stack pointer and pc are nowhere in - particular. This message needs to give people - in that situation enough information to - determine that it's no big deal. */ - printf_filtered ("\n\ - GDB is unable to find the start of the function at 0x%s\n\ -and thus can't determine the size of that function's stack frame.\n\ -This means that GDB may be unable to access that stack frame, or\n\ -the frames below it.\n\ - This problem is most likely caused by an invalid program counter or\n\ -stack pointer.\n\ - However, if you think GDB should simply search farther back\n\ -from 0x%s for code which looks like the beginning of a\n\ -function, you can increase the range of the search using the `set\n\ -heuristic-fence-post' command.\n", paddr_nz (pc), paddr_nz (pc)); - blurb_printed = 1; - } - } - - return 0; - } - else if (pc_is_mips16 (start_pc)) - { - unsigned short inst; - - /* On MIPS16, any one of the following is likely to be the - start of a function: - entry - addiu sp,-n - daddiu sp,-n - extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */ - inst = mips_fetch_instruction (start_pc); - if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */ - || (inst & 0xff80) == 0x6380 /* addiu sp,-n */ - || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */ - || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */ - break; - else if ((inst & 0xff00) == 0x6300 /* addiu sp */ - || (inst & 0xff00) == 0xfb00) /* daddiu sp */ - seen_adjsp = 1; - else - seen_adjsp = 0; - } - else if (mips_about_to_return (start_pc)) - { - start_pc += 2 * MIPS_INSTLEN; /* skip return, and its delay slot */ - break; - } - - return start_pc; -} - -/* Fetch the immediate value from a MIPS16 instruction. - If the previous instruction was an EXTEND, use it to extend - the upper bits of the immediate value. This is a helper function - for mips16_heuristic_proc_desc. */ - -static int -mips16_get_imm (unsigned short prev_inst, /* previous instruction */ - unsigned short inst, /* current instruction */ - int nbits, /* number of bits in imm field */ - int scale, /* scale factor to be applied to imm */ - int is_signed) /* is the imm field signed? */ -{ - int offset; - - if ((prev_inst & 0xf800) == 0xf000) /* prev instruction was EXTEND? */ - { - offset = ((prev_inst & 0x1f) << 11) | (prev_inst & 0x7e0); - if (offset & 0x8000) /* check for negative extend */ - offset = 0 - (0x10000 - (offset & 0xffff)); - return offset | (inst & 0x1f); - } - else - { - int max_imm = 1 << nbits; - int mask = max_imm - 1; - int sign_bit = max_imm >> 1; - - offset = inst & mask; - if (is_signed && (offset & sign_bit)) - offset = 0 - (max_imm - offset); - return offset * scale; - } -} - - -/* Fill in values in temp_proc_desc based on the MIPS16 instruction - stream from start_pc to limit_pc. */ - -static void -mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, - struct frame_info *next_frame, CORE_ADDR sp) -{ - CORE_ADDR cur_pc; - CORE_ADDR frame_addr = 0; /* Value of $r17, used as frame pointer */ - unsigned short prev_inst = 0; /* saved copy of previous instruction */ - unsigned inst = 0; /* current instruction */ - unsigned entry_inst = 0; /* the entry instruction */ - int reg, offset; - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); + /* Fetch and decode the instruction. */ + inst = (unsigned short) mips_fetch_instruction (cur_pc); - PROC_FRAME_OFFSET (&temp_proc_desc) = 0; /* size of stack frame */ - PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */ + /* Normally we ignore extend instructions. However, if it is + not followed by a valid prologue instruction, then this + instruction is not part of the prologue either. We must + remember in this case to adjust the end_prologue_addr back + over the extend. */ + if ((inst & 0xf800) == 0xf000) /* extend */ + { + extend_bytes = MIPS_INSN16_SIZE; + continue; + } - for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS16_INSTLEN) - { - /* Save the previous instruction. If it's an EXTEND, we'll extract - the immediate offset extension from it in mips16_get_imm. */ - prev_inst = inst; + prev_extend_bytes = extend_bytes; + extend_bytes = 0; - /* Fetch and decode the instruction. */ - inst = (unsigned short) mips_fetch_instruction (cur_pc); if ((inst & 0xff00) == 0x6300 /* addiu sp */ || (inst & 0xff00) == 0xfb00) /* daddiu sp */ { offset = mips16_get_imm (prev_inst, inst, 8, 8, 1); if (offset < 0) /* negative stack adjustment? */ - PROC_FRAME_OFFSET (&temp_proc_desc) -= offset; + frame_offset -= offset; else /* Exit loop if a positive stack adjustment is found, which usually means that the stack cleanup code in the function @@ -2042,58 +1484,66 @@ mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, { offset = mips16_get_imm (prev_inst, inst, 8, 4, 0); reg = mips16_to_32_reg[(inst & 0x700) >> 8]; - PROC_REG_MASK (&temp_proc_desc) |= (1 << reg); - set_reg_offset (temp_saved_regs, reg, sp + offset); + set_reg_offset (this_cache, reg, sp + offset); } else if ((inst & 0xff00) == 0xf900) /* sd reg,n($sp) */ { offset = mips16_get_imm (prev_inst, inst, 5, 8, 0); reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; - PROC_REG_MASK (&temp_proc_desc) |= (1 << reg); - set_reg_offset (temp_saved_regs, reg, sp + offset); + set_reg_offset (this_cache, reg, sp + offset); } else if ((inst & 0xff00) == 0x6200) /* sw $ra,n($sp) */ { offset = mips16_get_imm (prev_inst, inst, 8, 4, 0); - PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM); - set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset); + set_reg_offset (this_cache, MIPS_RA_REGNUM, sp + offset); } else if ((inst & 0xff00) == 0xfa00) /* sd $ra,n($sp) */ { offset = mips16_get_imm (prev_inst, inst, 8, 8, 0); - PROC_REG_MASK (&temp_proc_desc) |= (1 << RA_REGNUM); - set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset); + set_reg_offset (this_cache, MIPS_RA_REGNUM, sp + offset); } else if (inst == 0x673d) /* move $s1, $sp */ { frame_addr = sp; - PROC_FRAME_REG (&temp_proc_desc) = 17; + frame_reg = 17; } else if ((inst & 0xff00) == 0x0100) /* addiu $s1,sp,n */ { offset = mips16_get_imm (prev_inst, inst, 8, 4, 0); frame_addr = sp + offset; - PROC_FRAME_REG (&temp_proc_desc) = 17; - PROC_FRAME_ADJUST (&temp_proc_desc) = offset; + frame_reg = 17; + frame_adjust = offset; } else if ((inst & 0xFF00) == 0xd900) /* sw reg,offset($s1) */ { offset = mips16_get_imm (prev_inst, inst, 5, 4, 0); reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; - set_reg_offset (temp_saved_regs, reg, frame_addr + offset); + set_reg_offset (this_cache, reg, frame_addr + offset); } else if ((inst & 0xFF00) == 0x7900) /* sd reg,offset($s1) */ { offset = mips16_get_imm (prev_inst, inst, 5, 8, 0); reg = mips16_to_32_reg[(inst & 0xe0) >> 5]; - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; - set_reg_offset (temp_saved_regs, reg, frame_addr + offset); + set_reg_offset (this_cache, reg, frame_addr + offset); } - else if ((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */ + else if ((inst & 0xf81f) == 0xe809 + && (inst & 0x700) != 0x700) /* entry */ entry_inst = inst; /* save for later processing */ else if ((inst & 0xf800) == 0x1800) /* jal(x) */ - cur_pc += MIPS16_INSTLEN; /* 32-bit instruction */ + cur_pc += MIPS_INSN16_SIZE; /* 32-bit instruction */ + else if ((inst & 0xff1c) == 0x6704) /* move reg,$a0-$a3 */ + { + /* This instruction is part of the prologue, but we don't + need to do anything special to handle it. */ + } + else + { + /* This instruction is not an instruction typically found + in a prologue, so we must have reached the end of the + prologue. */ + if (end_prologue_addr == 0) + end_prologue_addr = cur_pc - prev_extend_bytes; + } } /* The entry instruction is typically the first instruction in a function, @@ -2108,17 +1558,16 @@ mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, int sreg_count = (entry_inst >> 6) & 3; /* The entry instruction always subtracts 32 from the SP. */ - PROC_FRAME_OFFSET (&temp_proc_desc) += 32; + frame_offset += 32; /* Now we can calculate what the SP must have been at the start of the function prologue. */ - sp += PROC_FRAME_OFFSET (&temp_proc_desc); + sp += frame_offset; /* Check if a0-a3 were saved in the caller's argument save area. */ for (reg = 4, offset = 0; reg < areg_count + 4; reg++) { - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; - set_reg_offset (temp_saved_regs, reg, sp + offset); + set_reg_offset (this_cache, reg, sp + offset); offset += mips_abi_regsize (current_gdbarch); } @@ -2126,87 +1575,250 @@ mips16_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, offset = -4; if (entry_inst & 0x20) { - PROC_REG_MASK (&temp_proc_desc) |= 1 << RA_REGNUM; - set_reg_offset (temp_saved_regs, RA_REGNUM, sp + offset); + set_reg_offset (this_cache, MIPS_RA_REGNUM, sp + offset); offset -= mips_abi_regsize (current_gdbarch); } /* Check if the s0 and s1 registers were pushed on the stack. */ for (reg = 16; reg < sreg_count + 16; reg++) { - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; - set_reg_offset (temp_saved_regs, reg, sp + offset); + set_reg_offset (this_cache, reg, sp + offset); offset -= mips_abi_regsize (current_gdbarch); } } + + if (this_cache != NULL) + { + this_cache->base = + (frame_unwind_register_signed (next_frame, NUM_REGS + frame_reg) + + frame_offset - frame_adjust); + /* FIXME: brobecker/2004-10-10: Just as in the mips32 case, we should + be able to get rid of the assignment below, evetually. But it's + still needed for now. */ + this_cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc] + = this_cache->saved_regs[NUM_REGS + MIPS_RA_REGNUM]; + } + + /* If we didn't reach the end of the prologue when scanning the function + instructions, then set end_prologue_addr to the address of the + instruction immediately after the last one we scanned. */ + if (end_prologue_addr == 0) + end_prologue_addr = cur_pc; + + return end_prologue_addr; +} + +/* Heuristic unwinder for 16-bit MIPS instruction set (aka MIPS16). + Procedures that use the 32-bit instruction set are handled by the + mips_insn32 unwinder. */ + +static struct mips_frame_cache * +mips_insn16_frame_cache (struct frame_info *next_frame, void **this_cache) +{ + struct mips_frame_cache *cache; + + if ((*this_cache) != NULL) + return (*this_cache); + cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache); + (*this_cache) = cache; + cache->saved_regs = trad_frame_alloc_saved_regs (next_frame); + + /* Analyze the function prologue. */ + { + const CORE_ADDR pc = frame_pc_unwind (next_frame); + CORE_ADDR start_addr; + + find_pc_partial_function (pc, NULL, &start_addr, NULL); + if (start_addr == 0) + start_addr = heuristic_proc_start (pc); + /* We can't analyze the prologue if we couldn't find the begining + of the function. */ + if (start_addr == 0) + return cache; + + mips16_scan_prologue (start_addr, pc, next_frame, *this_cache); + } + + /* SP_REGNUM, contains the value and not the address. */ + trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base); + + return (*this_cache); } static void -mips32_heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, - struct frame_info *next_frame, CORE_ADDR sp) +mips_insn16_frame_this_id (struct frame_info *next_frame, void **this_cache, + struct frame_id *this_id) { - CORE_ADDR cur_pc; - CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */ -restart: - temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS); - memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS); - PROC_FRAME_OFFSET (&temp_proc_desc) = 0; - PROC_FRAME_ADJUST (&temp_proc_desc) = 0; /* offset of FP from SP */ - for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSTLEN) - { - unsigned long inst, high_word, low_word; - int reg; + struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame, + this_cache); + (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame)); +} - /* Fetch the instruction. */ - inst = (unsigned long) mips_fetch_instruction (cur_pc); +static void +mips_insn16_frame_prev_register (struct frame_info *next_frame, + void **this_cache, + int regnum, int *optimizedp, + enum lval_type *lvalp, CORE_ADDR *addrp, + int *realnump, void *valuep) +{ + struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame, + this_cache); + trad_frame_get_prev_register (next_frame, info->saved_regs, regnum, + optimizedp, lvalp, addrp, realnump, valuep); +} - /* Save some code by pre-extracting some useful fields. */ - high_word = (inst >> 16) & 0xffff; - low_word = inst & 0xffff; - reg = high_word & 0x1f; +static const struct frame_unwind mips_insn16_frame_unwind = +{ + NORMAL_FRAME, + mips_insn16_frame_this_id, + mips_insn16_frame_prev_register +}; - if (high_word == 0x27bd /* addiu $sp,$sp,-i */ - || high_word == 0x23bd /* addi $sp,$sp,-i */ - || high_word == 0x67bd) /* daddiu $sp,$sp,-i */ - { - if (low_word & 0x8000) /* negative stack adjustment? */ - PROC_FRAME_OFFSET (&temp_proc_desc) += 0x10000 - low_word; +static const struct frame_unwind * +mips_insn16_frame_sniffer (struct frame_info *next_frame) +{ + CORE_ADDR pc = frame_pc_unwind (next_frame); + if (mips_pc_is_mips16 (pc)) + return &mips_insn16_frame_unwind; + return NULL; +} + +static CORE_ADDR +mips_insn16_frame_base_address (struct frame_info *next_frame, + void **this_cache) +{ + struct mips_frame_cache *info = mips_insn16_frame_cache (next_frame, + this_cache); + return info->base; +} + +static const struct frame_base mips_insn16_frame_base = +{ + &mips_insn16_frame_unwind, + mips_insn16_frame_base_address, + mips_insn16_frame_base_address, + mips_insn16_frame_base_address +}; + +static const struct frame_base * +mips_insn16_frame_base_sniffer (struct frame_info *next_frame) +{ + if (mips_insn16_frame_sniffer (next_frame) != NULL) + return &mips_insn16_frame_base; + else + return NULL; +} + +/* Mark all the registers as unset in the saved_regs array + of THIS_CACHE. Do nothing if THIS_CACHE is null. */ + +void +reset_saved_regs (struct mips_frame_cache *this_cache) +{ + if (this_cache == NULL || this_cache->saved_regs == NULL) + return; + + { + const int num_regs = NUM_REGS; + int i; + + for (i = 0; i < num_regs; i++) + { + this_cache->saved_regs[i].addr = -1; + } + } +} + +/* Analyze the function prologue from START_PC to LIMIT_PC. Builds + the associated FRAME_CACHE if not null. + Return the address of the first instruction past the prologue. */ + +static CORE_ADDR +mips32_scan_prologue (CORE_ADDR start_pc, CORE_ADDR limit_pc, + struct frame_info *next_frame, + struct mips_frame_cache *this_cache) +{ + CORE_ADDR cur_pc; + CORE_ADDR frame_addr = 0; /* Value of $r30. Used by gcc for frame-pointer */ + CORE_ADDR sp; + long frame_offset; + int frame_reg = MIPS_SP_REGNUM; + + CORE_ADDR end_prologue_addr = 0; + int seen_sp_adjust = 0; + int load_immediate_bytes = 0; + + /* Can be called when there's no process, and hence when there's no + NEXT_FRAME. */ + if (next_frame != NULL) + sp = read_next_frame_reg (next_frame, NUM_REGS + MIPS_SP_REGNUM); + else + sp = 0; + + if (limit_pc > start_pc + 200) + limit_pc = start_pc + 200; + +restart: + + frame_offset = 0; + for (cur_pc = start_pc; cur_pc < limit_pc; cur_pc += MIPS_INSN32_SIZE) + { + unsigned long inst, high_word, low_word; + int reg; + + /* Fetch the instruction. */ + inst = (unsigned long) mips_fetch_instruction (cur_pc); + + /* Save some code by pre-extracting some useful fields. */ + high_word = (inst >> 16) & 0xffff; + low_word = inst & 0xffff; + reg = high_word & 0x1f; + + if (high_word == 0x27bd /* addiu $sp,$sp,-i */ + || high_word == 0x23bd /* addi $sp,$sp,-i */ + || high_word == 0x67bd) /* daddiu $sp,$sp,-i */ + { + if (low_word & 0x8000) /* negative stack adjustment? */ + frame_offset += 0x10000 - low_word; else /* Exit loop if a positive stack adjustment is found, which usually means that the stack cleanup code in the function epilogue is reached. */ break; + seen_sp_adjust = 1; } else if ((high_word & 0xFFE0) == 0xafa0) /* sw reg,offset($sp) */ { - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; - set_reg_offset (temp_saved_regs, reg, sp + low_word); + set_reg_offset (this_cache, reg, sp + low_word); } else if ((high_word & 0xFFE0) == 0xffa0) /* sd reg,offset($sp) */ { - /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and - $ra. */ - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; - set_reg_offset (temp_saved_regs, reg, sp + low_word); + /* Irix 6.2 N32 ABI uses sd instructions for saving $gp and $ra. */ + set_reg_offset (this_cache, reg, sp + low_word); } else if (high_word == 0x27be) /* addiu $30,$sp,size */ { /* Old gcc frame, r30 is virtual frame pointer. */ - if ((long) low_word != PROC_FRAME_OFFSET (&temp_proc_desc)) + if ((long) low_word != frame_offset) frame_addr = sp + low_word; - else if (PROC_FRAME_REG (&temp_proc_desc) == MIPS_SP_REGNUM) + else if (frame_reg == MIPS_SP_REGNUM) { unsigned alloca_adjust; - PROC_FRAME_REG (&temp_proc_desc) = 30; + + frame_reg = 30; frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30); alloca_adjust = (unsigned) (frame_addr - (sp + low_word)); if (alloca_adjust > 0) { - /* FP > SP + frame_size. This may be because - * of an alloca or somethings similar. - * Fix sp to "pre-alloca" value, and try again. - */ + /* FP > SP + frame_size. This may be because of + an alloca or somethings similar. Fix sp to + "pre-alloca" value, and try again. */ sp += alloca_adjust; + /* Need to reset the status of all registers. Otherwise, + we will hit a guard that prevents the new address + for each register to be recomputed during the second + pass. */ + reset_saved_regs (this_cache); goto restart; } } @@ -2217,359 +1829,501 @@ restart: else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d) { /* New gcc frame, virtual frame pointer is at r30 + frame_size. */ - if (PROC_FRAME_REG (&temp_proc_desc) == MIPS_SP_REGNUM) + if (frame_reg == MIPS_SP_REGNUM) { unsigned alloca_adjust; - PROC_FRAME_REG (&temp_proc_desc) = 30; + + frame_reg = 30; frame_addr = read_next_frame_reg (next_frame, NUM_REGS + 30); alloca_adjust = (unsigned) (frame_addr - sp); if (alloca_adjust > 0) - { - /* FP > SP + frame_size. This may be because - * of an alloca or somethings similar. - * Fix sp to "pre-alloca" value, and try again. - */ - sp += alloca_adjust; - goto restart; - } + { + /* FP > SP + frame_size. This may be because of + an alloca or somethings similar. Fix sp to + "pre-alloca" value, and try again. */ + sp = frame_addr; + /* Need to reset the status of all registers. Otherwise, + we will hit a guard that prevents the new address + for each register to be recomputed during the second + pass. */ + reset_saved_regs (this_cache); + goto restart; + } } } else if ((high_word & 0xFFE0) == 0xafc0) /* sw reg,offset($30) */ { - PROC_REG_MASK (&temp_proc_desc) |= 1 << reg; - set_reg_offset (temp_saved_regs, reg, frame_addr + low_word); + set_reg_offset (this_cache, reg, frame_addr + low_word); } + else if ((high_word & 0xFFE0) == 0xE7A0 /* swc1 freg,n($sp) */ + || (high_word & 0xF3E0) == 0xA3C0 /* sx reg,n($s8) */ + || (inst & 0xFF9F07FF) == 0x00800021 /* move reg,$a0-$a3 */ + || high_word == 0x3c1c /* lui $gp,n */ + || high_word == 0x279c /* addiu $gp,$gp,n */ + || inst == 0x0399e021 /* addu $gp,$gp,$t9 */ + || inst == 0x033ce021 /* addu $gp,$t9,$gp */ + ) + { + /* These instructions are part of the prologue, but we don't + need to do anything special to handle them. */ + } + /* The instructions below load $at or $t0 with an immediate + value in preparation for a stack adjustment via + subu $sp,$sp,[$at,$t0]. These instructions could also + initialize a local variable, so we accept them only before + a stack adjustment instruction was seen. */ + else if (!seen_sp_adjust + && (high_word == 0x3c01 /* lui $at,n */ + || high_word == 0x3c08 /* lui $t0,n */ + || high_word == 0x3421 /* ori $at,$at,n */ + || high_word == 0x3508 /* ori $t0,$t0,n */ + || high_word == 0x3401 /* ori $at,$zero,n */ + || high_word == 0x3408 /* ori $t0,$zero,n */ + )) + { + load_immediate_bytes += MIPS_INSN32_SIZE; /* FIXME! */ + } + else + { + /* This instruction is not an instruction typically found + in a prologue, so we must have reached the end of the + prologue. */ + /* FIXME: brobecker/2004-10-10: Can't we just break out of this + loop now? Why would we need to continue scanning the function + instructions? */ + if (end_prologue_addr == 0) + end_prologue_addr = cur_pc; + } } + + if (this_cache != NULL) + { + this_cache->base = + (frame_unwind_register_signed (next_frame, NUM_REGS + frame_reg) + + frame_offset); + /* FIXME: brobecker/2004-09-15: We should be able to get rid of + this assignment below, eventually. But it's still needed + for now. */ + this_cache->saved_regs[NUM_REGS + mips_regnum (current_gdbarch)->pc] + = this_cache->saved_regs[NUM_REGS + MIPS_RA_REGNUM]; + } + + /* If we didn't reach the end of the prologue when scanning the function + instructions, then set end_prologue_addr to the address of the + instruction immediately after the last one we scanned. */ + /* brobecker/2004-10-10: I don't think this would ever happen, but + we may as well be careful and do our best if we have a null + end_prologue_addr. */ + if (end_prologue_addr == 0) + end_prologue_addr = cur_pc; + + /* In a frameless function, we might have incorrectly + skipped some load immediate instructions. Undo the skipping + if the load immediate was not followed by a stack adjustment. */ + if (load_immediate_bytes && !seen_sp_adjust) + end_prologue_addr -= load_immediate_bytes; + + return end_prologue_addr; } -static mips_extra_func_info_t -heuristic_proc_desc (CORE_ADDR start_pc, CORE_ADDR limit_pc, - struct frame_info *next_frame, int cur_frame) +/* Heuristic unwinder for procedures using 32-bit instructions (covers + both 32-bit and 64-bit MIPS ISAs). Procedures using 16-bit + instructions (a.k.a. MIPS16) are handled by the mips_insn16 + unwinder. */ + +static struct mips_frame_cache * +mips_insn32_frame_cache (struct frame_info *next_frame, void **this_cache) { - CORE_ADDR sp; + struct mips_frame_cache *cache; - if (cur_frame) - sp = read_next_frame_reg (next_frame, NUM_REGS + MIPS_SP_REGNUM); - else - sp = 0; + if ((*this_cache) != NULL) + return (*this_cache); - if (start_pc == 0) - return NULL; - memset (&temp_proc_desc, '\0', sizeof (temp_proc_desc)); - temp_saved_regs = xrealloc (temp_saved_regs, SIZEOF_FRAME_SAVED_REGS); - memset (temp_saved_regs, '\0', SIZEOF_FRAME_SAVED_REGS); - PROC_LOW_ADDR (&temp_proc_desc) = start_pc; - PROC_FRAME_REG (&temp_proc_desc) = MIPS_SP_REGNUM; - PROC_PC_REG (&temp_proc_desc) = RA_REGNUM; - - if (start_pc + 200 < limit_pc) - limit_pc = start_pc + 200; - if (pc_is_mips16 (start_pc)) - mips16_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp); - else - mips32_heuristic_proc_desc (start_pc, limit_pc, next_frame, sp); - return &temp_proc_desc; + cache = FRAME_OBSTACK_ZALLOC (struct mips_frame_cache); + (*this_cache) = cache; + cache->saved_regs = trad_frame_alloc_saved_regs (next_frame); + + /* Analyze the function prologue. */ + { + const CORE_ADDR pc = frame_pc_unwind (next_frame); + CORE_ADDR start_addr; + + find_pc_partial_function (pc, NULL, &start_addr, NULL); + if (start_addr == 0) + start_addr = heuristic_proc_start (pc); + /* We can't analyze the prologue if we couldn't find the begining + of the function. */ + if (start_addr == 0) + return cache; + + mips32_scan_prologue (start_addr, pc, next_frame, *this_cache); + } + + /* SP_REGNUM, contains the value and not the address. */ + trad_frame_set_value (cache->saved_regs, NUM_REGS + MIPS_SP_REGNUM, cache->base); + + return (*this_cache); } -struct mips_objfile_private +static void +mips_insn32_frame_this_id (struct frame_info *next_frame, void **this_cache, + struct frame_id *this_id) { - bfd_size_type size; - char *contents; + struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame, + this_cache); + (*this_id) = frame_id_build (info->base, frame_func_unwind (next_frame)); +} + +static void +mips_insn32_frame_prev_register (struct frame_info *next_frame, + void **this_cache, + int regnum, int *optimizedp, + enum lval_type *lvalp, CORE_ADDR *addrp, + int *realnump, void *valuep) +{ + struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame, + this_cache); + trad_frame_get_prev_register (next_frame, info->saved_regs, regnum, + optimizedp, lvalp, addrp, realnump, valuep); +} + +static const struct frame_unwind mips_insn32_frame_unwind = +{ + NORMAL_FRAME, + mips_insn32_frame_this_id, + mips_insn32_frame_prev_register }; -/* Global used to communicate between non_heuristic_proc_desc and - compare_pdr_entries within qsort (). */ -static bfd *the_bfd; +static const struct frame_unwind * +mips_insn32_frame_sniffer (struct frame_info *next_frame) +{ + CORE_ADDR pc = frame_pc_unwind (next_frame); + if (! mips_pc_is_mips16 (pc)) + return &mips_insn32_frame_unwind; + return NULL; +} -static int -compare_pdr_entries (const void *a, const void *b) +static CORE_ADDR +mips_insn32_frame_base_address (struct frame_info *next_frame, + void **this_cache) { - CORE_ADDR lhs = bfd_get_32 (the_bfd, (bfd_byte *) a); - CORE_ADDR rhs = bfd_get_32 (the_bfd, (bfd_byte *) b); + struct mips_frame_cache *info = mips_insn32_frame_cache (next_frame, + this_cache); + return info->base; +} - if (lhs < rhs) - return -1; - else if (lhs == rhs) - return 0; +static const struct frame_base mips_insn32_frame_base = +{ + &mips_insn32_frame_unwind, + mips_insn32_frame_base_address, + mips_insn32_frame_base_address, + mips_insn32_frame_base_address +}; + +static const struct frame_base * +mips_insn32_frame_base_sniffer (struct frame_info *next_frame) +{ + if (mips_insn32_frame_sniffer (next_frame) != NULL) + return &mips_insn32_frame_base; else - return 1; + return NULL; } -static mips_extra_func_info_t -non_heuristic_proc_desc (CORE_ADDR pc, CORE_ADDR *addrptr) +static struct trad_frame_cache * +mips_stub_frame_cache (struct frame_info *next_frame, void **this_cache) { - CORE_ADDR startaddr; - mips_extra_func_info_t proc_desc; - struct block *b = block_for_pc (pc); - struct symbol *sym; - struct obj_section *sec; - struct mips_objfile_private *priv; + CORE_ADDR pc; + CORE_ADDR start_addr; + CORE_ADDR stack_addr; + struct trad_frame_cache *this_trad_cache; - find_pc_partial_function (pc, NULL, &startaddr, NULL); - if (addrptr) - *addrptr = startaddr; + if ((*this_cache) != NULL) + return (*this_cache); + this_trad_cache = trad_frame_cache_zalloc (next_frame); + (*this_cache) = this_trad_cache; - priv = NULL; + /* The return address is in the link register. */ + trad_frame_set_reg_realreg (this_trad_cache, PC_REGNUM, MIPS_RA_REGNUM); - sec = find_pc_section (pc); - if (sec != NULL) - { - priv = (struct mips_objfile_private *) objfile_data (sec->objfile, mips_pdr_data); + /* Frame ID, since it's a frameless / stackless function, no stack + space is allocated and SP on entry is the current SP. */ + pc = frame_pc_unwind (next_frame); + find_pc_partial_function (pc, NULL, &start_addr, NULL); + stack_addr = frame_unwind_register_signed (next_frame, MIPS_SP_REGNUM); + trad_frame_set_id (this_trad_cache, frame_id_build (start_addr, stack_addr)); - /* Search the ".pdr" section generated by GAS. This includes most of - the information normally found in ECOFF PDRs. */ + /* Assume that the frame's base is the same as the + stack-pointer. */ + trad_frame_set_this_base (this_trad_cache, stack_addr); - the_bfd = sec->objfile->obfd; - if (priv == NULL - && (the_bfd->format == bfd_object - && bfd_get_flavour (the_bfd) == bfd_target_elf_flavour - && elf_elfheader (the_bfd)->e_ident[EI_CLASS] == ELFCLASS64)) - { - /* Right now GAS only outputs the address as a four-byte sequence. - This means that we should not bother with this method on 64-bit - targets (until that is fixed). */ - - priv = obstack_alloc (&sec->objfile->objfile_obstack, - sizeof (struct mips_objfile_private)); - priv->size = 0; - set_objfile_data (sec->objfile, mips_pdr_data, priv); - } - else if (priv == NULL) - { - asection *bfdsec; + return this_trad_cache; +} - priv = obstack_alloc (&sec->objfile->objfile_obstack, - sizeof (struct mips_objfile_private)); +static void +mips_stub_frame_this_id (struct frame_info *next_frame, void **this_cache, + struct frame_id *this_id) +{ + struct trad_frame_cache *this_trad_cache + = mips_stub_frame_cache (next_frame, this_cache); + trad_frame_get_id (this_trad_cache, this_id); +} - bfdsec = bfd_get_section_by_name (sec->objfile->obfd, ".pdr"); - if (bfdsec != NULL) - { - priv->size = bfd_section_size (sec->objfile->obfd, bfdsec); - priv->contents = obstack_alloc (&sec->objfile->objfile_obstack, - priv->size); - bfd_get_section_contents (sec->objfile->obfd, bfdsec, - priv->contents, 0, priv->size); - - /* In general, the .pdr section is sorted. However, in the - presence of multiple code sections (and other corner cases) - it can become unsorted. Sort it so that we can use a faster - binary search. */ - qsort (priv->contents, priv->size / 32, 32, - compare_pdr_entries); - } - else - priv->size = 0; +static void +mips_stub_frame_prev_register (struct frame_info *next_frame, + void **this_cache, + int regnum, int *optimizedp, + enum lval_type *lvalp, CORE_ADDR *addrp, + int *realnump, void *valuep) +{ + struct trad_frame_cache *this_trad_cache + = mips_stub_frame_cache (next_frame, this_cache); + trad_frame_get_register (this_trad_cache, next_frame, regnum, optimizedp, + lvalp, addrp, realnump, valuep); +} - set_objfile_data (sec->objfile, mips_pdr_data, priv); - } - the_bfd = NULL; +static const struct frame_unwind mips_stub_frame_unwind = +{ + NORMAL_FRAME, + mips_stub_frame_this_id, + mips_stub_frame_prev_register +}; - if (priv->size != 0) - { - int low, mid, high; - char *ptr; - CORE_ADDR pdr_pc; - - low = 0; - high = priv->size / 32; - - /* We've found a .pdr section describing this objfile. We want to - find the entry which describes this code address. The .pdr - information is not very descriptive; we have only a function - start address. We have to look for the closest entry, because - the local symbol at the beginning of this function may have - been stripped - so if we ask the symbol table for the start - address we may get a preceding global function. */ - - /* First, find the last .pdr entry starting at or before PC. */ - do - { - mid = (low + high) / 2; +static const struct frame_unwind * +mips_stub_frame_sniffer (struct frame_info *next_frame) +{ + struct obj_section *s; + CORE_ADDR pc = frame_pc_unwind (next_frame); - ptr = priv->contents + mid * 32; - pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr); - pdr_pc += ANOFFSET (sec->objfile->section_offsets, - SECT_OFF_TEXT (sec->objfile)); + if (in_plt_section (pc, NULL)) + return &mips_stub_frame_unwind; - if (pdr_pc > pc) - high = mid; - else - low = mid + 1; - } - while (low != high); + /* Binutils for MIPS puts lazy resolution stubs into .MIPS.stubs. */ + s = find_pc_section (pc); - /* Both low and high point one past the PDR of interest. If - both are zero, that means this PC is before any region - covered by a PDR, i.e. pdr_pc for the first PDR entry is - greater than PC. */ - if (low > 0) - { - ptr = priv->contents + (low - 1) * 32; - pdr_pc = bfd_get_signed_32 (sec->objfile->obfd, ptr); - pdr_pc += ANOFFSET (sec->objfile->section_offsets, - SECT_OFF_TEXT (sec->objfile)); - } + if (s != NULL + && strcmp (bfd_get_section_name (s->objfile->obfd, s->the_bfd_section), + ".MIPS.stubs") == 0) + return &mips_stub_frame_unwind; - /* We don't have a range, so we have no way to know for sure - whether we're in the correct PDR or a PDR for a preceding - function and the current function was a stripped local - symbol. But if the PDR's PC is at least as great as the - best guess from the symbol table, assume that it does cover - the right area; if a .pdr section is present at all then - nearly every function will have an entry. The biggest exception - will be the dynamic linker stubs; conveniently these are - placed before .text instead of after. */ - - if (pc >= pdr_pc && pdr_pc >= startaddr) - { - struct symbol *sym = find_pc_function (pc); - - if (addrptr) - *addrptr = pdr_pc; - - /* Fill in what we need of the proc_desc. */ - proc_desc = (mips_extra_func_info_t) - obstack_alloc (&sec->objfile->objfile_obstack, - sizeof (struct mips_extra_func_info)); - PROC_LOW_ADDR (proc_desc) = pdr_pc; - - /* Only used for dummy frames. */ - PROC_HIGH_ADDR (proc_desc) = 0; - - PROC_FRAME_OFFSET (proc_desc) - = bfd_get_32 (sec->objfile->obfd, ptr + 20); - PROC_FRAME_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd, - ptr + 24); - PROC_FRAME_ADJUST (proc_desc) = 0; - PROC_REG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd, - ptr + 4); - PROC_FREG_MASK (proc_desc) = bfd_get_32 (sec->objfile->obfd, - ptr + 12); - PROC_REG_OFFSET (proc_desc) = bfd_get_32 (sec->objfile->obfd, - ptr + 8); - PROC_FREG_OFFSET (proc_desc) - = bfd_get_32 (sec->objfile->obfd, ptr + 16); - PROC_PC_REG (proc_desc) = bfd_get_32 (sec->objfile->obfd, - ptr + 28); - proc_desc->pdr.isym = (long) sym; - - return proc_desc; - } - } - } + return NULL; +} - if (b == NULL) - return NULL; +static CORE_ADDR +mips_stub_frame_base_address (struct frame_info *next_frame, + void **this_cache) +{ + struct trad_frame_cache *this_trad_cache + = mips_stub_frame_cache (next_frame, this_cache); + return trad_frame_get_this_base (this_trad_cache); +} - if (startaddr > BLOCK_START (b)) - { - /* This is the "pathological" case referred to in a comment in - print_frame_info. It might be better to move this check into - symbol reading. */ - return NULL; - } +static const struct frame_base mips_stub_frame_base = +{ + &mips_stub_frame_unwind, + mips_stub_frame_base_address, + mips_stub_frame_base_address, + mips_stub_frame_base_address +}; - sym = lookup_symbol (MIPS_EFI_SYMBOL_NAME, b, LABEL_DOMAIN, 0, NULL); +static const struct frame_base * +mips_stub_frame_base_sniffer (struct frame_info *next_frame) +{ + if (mips_stub_frame_sniffer (next_frame) != NULL) + return &mips_stub_frame_base; + else + return NULL; +} - /* If we never found a PDR for this function in symbol reading, then - examine prologues to find the information. */ - if (sym) +static CORE_ADDR +read_next_frame_reg (struct frame_info *fi, int regno) +{ + /* Always a pseudo. */ + gdb_assert (regno >= NUM_REGS); + if (fi == NULL) { - proc_desc = (mips_extra_func_info_t) SYMBOL_VALUE (sym); - if (PROC_FRAME_REG (proc_desc) == -1) - return NULL; - else - return proc_desc; + LONGEST val; + regcache_cooked_read_signed (current_regcache, regno, &val); + return val; } else - return NULL; + return frame_unwind_register_signed (fi, regno); + } +/* mips_addr_bits_remove - remove useless address bits */ -static mips_extra_func_info_t -find_proc_desc (CORE_ADDR pc, struct frame_info *next_frame, int cur_frame) +static CORE_ADDR +mips_addr_bits_remove (CORE_ADDR addr) { - mips_extra_func_info_t proc_desc; - CORE_ADDR startaddr = 0; - - proc_desc = non_heuristic_proc_desc (pc, &startaddr); + struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); + if (mips_mask_address_p (tdep) && (((ULONGEST) addr) >> 32 == 0xffffffffUL)) + /* This hack is a work-around for existing boards using PMON, the + simulator, and any other 64-bit targets that doesn't have true + 64-bit addressing. On these targets, the upper 32 bits of + addresses are ignored by the hardware. Thus, the PC or SP are + likely to have been sign extended to all 1s by instruction + sequences that load 32-bit addresses. For example, a typical + piece of code that loads an address is this: - if (proc_desc) - { - /* IF this is the topmost frame AND - * (this proc does not have debugging information OR - * the PC is in the procedure prologue) - * THEN create a "heuristic" proc_desc (by analyzing - * the actual code) to replace the "official" proc_desc. - */ - if (next_frame == NULL) - { - struct symtab_and_line val; - struct symbol *proc_symbol = - PROC_DESC_IS_DUMMY (proc_desc) ? 0 : PROC_SYMBOL (proc_desc); + lui $r2, + ori $r2, - if (proc_symbol) - { - val = find_pc_line (BLOCK_START - (SYMBOL_BLOCK_VALUE (proc_symbol)), 0); - val.pc = val.end ? val.end : pc; - } - if (!proc_symbol || pc < val.pc) - { - mips_extra_func_info_t found_heuristic = - heuristic_proc_desc (PROC_LOW_ADDR (proc_desc), - pc, next_frame, cur_frame); - if (found_heuristic) - proc_desc = found_heuristic; - } - } - } + But the lui sign-extends the value such that the upper 32 bits + may be all 1s. The workaround is simply to mask off these + bits. In the future, gcc may be changed to support true 64-bit + addressing, and this masking will have to be disabled. */ + return addr &= 0xffffffffUL; else - { - /* Is linked_proc_desc_table really necessary? It only seems to be used - by procedure call dummys. However, the procedures being called ought - to have their own proc_descs, and even if they don't, - heuristic_proc_desc knows how to create them! */ + return addr; +} - struct linked_proc_info *link; +/* mips_software_single_step() is called just before we want to resume + the inferior, if we want to single-step it but there is no hardware + or kernel single-step support (MIPS on GNU/Linux for example). We find + the target of the coming instruction and breakpoint it. - for (link = linked_proc_desc_table; link; link = link->next) - if (PROC_LOW_ADDR (&link->info) <= pc - && PROC_HIGH_ADDR (&link->info) > pc) - return &link->info; + single_step is also called just after the inferior stops. If we had + set up a simulated single-step, we undo our damage. */ + +void +mips_software_single_step (enum target_signal sig, int insert_breakpoints_p) +{ + static CORE_ADDR next_pc; + typedef char binsn_quantum[BREAKPOINT_MAX]; + static binsn_quantum break_mem; + CORE_ADDR pc; - if (startaddr == 0) - startaddr = heuristic_proc_start (pc); + if (insert_breakpoints_p) + { + pc = read_register (mips_regnum (current_gdbarch)->pc); + next_pc = mips_next_pc (pc); - proc_desc = heuristic_proc_desc (startaddr, pc, next_frame, cur_frame); + target_insert_breakpoint (next_pc, break_mem); } - return proc_desc; + else + target_remove_breakpoint (next_pc, break_mem); } -/* MIPS stack frames are almost impenetrable. When execution stops, - we basically have to look at symbol information for the function - that we stopped in, which tells us *which* register (if any) is - the base of the frame pointer, and what offset from that register - the frame itself is at. +/* Test whether the PC points to the return instruction at the + end of a function. */ + +static int +mips_about_to_return (CORE_ADDR pc) +{ + if (mips_pc_is_mips16 (pc)) + /* This mips16 case isn't necessarily reliable. Sometimes the compiler + generates a "jr $ra"; other times it generates code to load + the return address from the stack to an accessible register (such + as $a3), then a "jr" using that register. This second case + is almost impossible to distinguish from an indirect jump + used for switch statements, so we don't even try. */ + return mips_fetch_instruction (pc) == 0xe820; /* jr $ra */ + else + return mips_fetch_instruction (pc) == 0x3e00008; /* jr $ra */ +} - This presents a problem when trying to examine a stack in memory - (that isn't executing at the moment), using the "frame" command. We - don't have a PC, nor do we have any registers except SP. - This routine takes two arguments, SP and PC, and tries to make the - cached frames look as if these two arguments defined a frame on the - cache. This allows the rest of info frame to extract the important - arguments without difficulty. */ +/* This fencepost looks highly suspicious to me. Removing it also + seems suspicious as it could affect remote debugging across serial + lines. */ -struct frame_info * -setup_arbitrary_frame (int argc, CORE_ADDR *argv) +static CORE_ADDR +heuristic_proc_start (CORE_ADDR pc) { - if (argc != 2) - error ("MIPS frame specifications require two arguments: sp and pc"); + CORE_ADDR start_pc; + CORE_ADDR fence; + int instlen; + int seen_adjsp = 0; + + pc = ADDR_BITS_REMOVE (pc); + start_pc = pc; + fence = start_pc - heuristic_fence_post; + if (start_pc == 0) + return 0; + + if (heuristic_fence_post == UINT_MAX || fence < VM_MIN_ADDRESS) + fence = VM_MIN_ADDRESS; + + instlen = mips_pc_is_mips16 (pc) ? MIPS_INSN16_SIZE : MIPS_INSN32_SIZE; + + /* search back for previous return */ + for (start_pc -= instlen;; start_pc -= instlen) + if (start_pc < fence) + { + /* It's not clear to me why we reach this point when + stop_soon, but with this test, at least we + don't print out warnings for every child forked (eg, on + decstation). 22apr93 rich@cygnus.com. */ + if (stop_soon == NO_STOP_QUIETLY) + { + static int blurb_printed = 0; + + warning (_("GDB can't find the start of the function at 0x%s."), + paddr_nz (pc)); + + if (!blurb_printed) + { + /* This actually happens frequently in embedded + development, when you first connect to a board + and your stack pointer and pc are nowhere in + particular. This message needs to give people + in that situation enough information to + determine that it's no big deal. */ + printf_filtered ("\n\ + GDB is unable to find the start of the function at 0x%s\n\ +and thus can't determine the size of that function's stack frame.\n\ +This means that GDB may be unable to access that stack frame, or\n\ +the frames below it.\n\ + This problem is most likely caused by an invalid program counter or\n\ +stack pointer.\n\ + However, if you think GDB should simply search farther back\n\ +from 0x%s for code which looks like the beginning of a\n\ +function, you can increase the range of the search using the `set\n\ +heuristic-fence-post' command.\n", paddr_nz (pc), paddr_nz (pc)); + blurb_printed = 1; + } + } + + return 0; + } + else if (mips_pc_is_mips16 (start_pc)) + { + unsigned short inst; - return create_new_frame (argv[0], argv[1]); + /* On MIPS16, any one of the following is likely to be the + start of a function: + entry + addiu sp,-n + daddiu sp,-n + extend -n followed by 'addiu sp,+n' or 'daddiu sp,+n' */ + inst = mips_fetch_instruction (start_pc); + if (((inst & 0xf81f) == 0xe809 && (inst & 0x700) != 0x700) /* entry */ + || (inst & 0xff80) == 0x6380 /* addiu sp,-n */ + || (inst & 0xff80) == 0xfb80 /* daddiu sp,-n */ + || ((inst & 0xf810) == 0xf010 && seen_adjsp)) /* extend -n */ + break; + else if ((inst & 0xff00) == 0x6300 /* addiu sp */ + || (inst & 0xff00) == 0xfb00) /* daddiu sp */ + seen_adjsp = 1; + else + seen_adjsp = 0; + } + else if (mips_about_to_return (start_pc)) + { + /* Skip return and its delay slot. */ + start_pc += 2 * MIPS_INSN32_SIZE; + break; + } + + return start_pc; } +struct mips_objfile_private +{ + bfd_size_type size; + char *contents; +}; + /* According to the current ABI, should the type be passed in a floating-point register (assuming that there is space)? When there is no FPU, FP are not even considered as possibile candidates for @@ -2604,164 +2358,25 @@ mips_type_needs_double_align (struct type *type) return 0; return mips_type_needs_double_align (TYPE_FIELD_TYPE (type, 0)); } - else if (typecode == TYPE_CODE_UNION) - { - int i, n; - - n = TYPE_NFIELDS (type); - for (i = 0; i < n; i++) - if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i))) - return 1; - return 0; - } - return 0; -} - -/* Adjust the address downward (direction of stack growth) so that it - is correctly aligned for a new stack frame. */ -static CORE_ADDR -mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr) -{ - return align_down (addr, 16); -} - -/* Determine how a return value is stored within the MIPS register - file, given the return type `valtype'. */ - -struct return_value_word -{ - int len; - int reg; - int reg_offset; - int buf_offset; -}; - -static void -return_value_location (struct type *valtype, - struct return_value_word *hi, - struct return_value_word *lo) -{ - int len = TYPE_LENGTH (valtype); - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - - if (TYPE_CODE (valtype) == TYPE_CODE_FLT - && ((MIPS_FPU_TYPE == MIPS_FPU_DOUBLE && (len == 4 || len == 8)) - || (MIPS_FPU_TYPE == MIPS_FPU_SINGLE && len == 4))) - { - if (mips_abi_regsize (current_gdbarch) < 8 && len == 8) - { - /* We need to break a 64bit float in two 32 bit halves and - spread them across a floating-point register pair. */ - lo->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 4 : 0; - hi->buf_offset = TARGET_BYTE_ORDER == BFD_ENDIAN_BIG ? 0 : 4; - lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG - && register_size (current_gdbarch, - mips_regnum (current_gdbarch)-> - fp0) == 8) ? 4 : 0); - hi->reg_offset = lo->reg_offset; - lo->reg = mips_regnum (current_gdbarch)->fp0 + 0; - hi->reg = mips_regnum (current_gdbarch)->fp0 + 1; - lo->len = 4; - hi->len = 4; - } - else - { - /* The floating point value fits in a single floating-point - register. */ - lo->reg_offset = ((TARGET_BYTE_ORDER == BFD_ENDIAN_BIG - && register_size (current_gdbarch, - mips_regnum (current_gdbarch)-> - fp0) == 8 - && len == 4) ? 4 : 0); - lo->reg = mips_regnum (current_gdbarch)->fp0; - lo->len = len; - lo->buf_offset = 0; - hi->len = 0; - hi->reg_offset = 0; - hi->buf_offset = 0; - hi->reg = 0; - } - } - else - { - /* Locate a result possibly spread across two registers. */ - int regnum = 2; - lo->reg = regnum + 0; - hi->reg = regnum + 1; - if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG - && len < mips_abi_regsize (current_gdbarch)) - { - /* "un-left-justify" the value in the low register */ - lo->reg_offset = mips_abi_regsize (current_gdbarch) - len; - lo->len = len; - hi->reg_offset = 0; - hi->len = 0; - } - else if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG && len > mips_abi_regsize (current_gdbarch) /* odd-size structs */ - && len < mips_abi_regsize (current_gdbarch) * 2 - && (TYPE_CODE (valtype) == TYPE_CODE_STRUCT || - TYPE_CODE (valtype) == TYPE_CODE_UNION)) - { - /* "un-left-justify" the value spread across two registers. */ - lo->reg_offset = 2 * mips_abi_regsize (current_gdbarch) - len; - lo->len = mips_abi_regsize (current_gdbarch) - lo->reg_offset; - hi->reg_offset = 0; - hi->len = len - lo->len; - } - else - { - /* Only perform a partial copy of the second register. */ - lo->reg_offset = 0; - hi->reg_offset = 0; - if (len > mips_abi_regsize (current_gdbarch)) - { - lo->len = mips_abi_regsize (current_gdbarch); - hi->len = len - mips_abi_regsize (current_gdbarch); - } - else - { - lo->len = len; - hi->len = 0; - } - } - if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG - && register_size (current_gdbarch, regnum) == 8 - && mips_abi_regsize (current_gdbarch) == 4) - { - /* Account for the fact that only the least-signficant part - of the register is being used */ - lo->reg_offset += 4; - hi->reg_offset += 4; - } - lo->buf_offset = 0; - hi->buf_offset = lo->len; - } -} - -/* Should call_function allocate stack space for a struct return? */ + else if (typecode == TYPE_CODE_UNION) + { + int i, n; -static int -mips_eabi_use_struct_convention (int gcc_p, struct type *type) -{ - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - return (TYPE_LENGTH (type) > 2 * mips_abi_regsize (current_gdbarch)); + n = TYPE_NFIELDS (type); + for (i = 0; i < n; i++) + if (mips_type_needs_double_align (TYPE_FIELD_TYPE (type, i))) + return 1; + return 0; + } + return 0; } -/* Should call_function pass struct by reference? - For each architecture, structs are passed either by - value or by reference, depending on their size. */ - -static int -mips_eabi_reg_struct_has_addr (int gcc_p, struct type *type) +/* Adjust the address downward (direction of stack growth) so that it + is correctly aligned for a new stack frame. */ +static CORE_ADDR +mips_frame_align (struct gdbarch *gdbarch, CORE_ADDR addr) { - enum type_code typecode = TYPE_CODE (check_typedef (type)); - int len = TYPE_LENGTH (check_typedef (type)); - struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - - if (typecode == TYPE_CODE_STRUCT || typecode == TYPE_CODE_UNION) - return (len > mips_abi_regsize (current_gdbarch)); - - return 0; + return align_down (addr, 16); } static CORE_ADDR @@ -2780,11 +2395,11 @@ mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function, /* For shared libraries, "t9" needs to point at the function address. */ - regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr); + regcache_cooked_write_signed (regcache, MIPS_T9_REGNUM, func_addr); /* Set the return address register to point to the entry point of the program, where a breakpoint lies in wait. */ - regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr); + regcache_cooked_write_signed (regcache, MIPS_RA_REGNUM, bp_addr); /* First ensure that the stack and structure return address (if any) are properly aligned. The stack has to be at least 64-bit @@ -2799,7 +2414,7 @@ mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function, than necessary for EABI, because the first few arguments are passed in registers, but that's OK. */ for (argnum = 0; argnum < nargs; argnum++) - len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])), + len += align_up (TYPE_LENGTH (value_type (args[argnum])), mips_stack_argsize (gdbarch)); sp -= align_up (len, 16); @@ -2809,7 +2424,7 @@ mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function, paddr_nz (sp), (long) align_up (len, 16)); /* Initialize the integer and float register pointers. */ - argreg = A0_REGNUM; + argreg = MIPS_A0_REGNUM; float_argreg = mips_fpa0_regnum (current_gdbarch); /* The struct_return pointer occupies the first parameter-passing reg. */ @@ -2827,10 +2442,10 @@ mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function, from first to last. */ for (argnum = 0; argnum < nargs; argnum++) { - char *val; - char valbuf[MAX_REGISTER_SIZE]; + const gdb_byte *val; + gdb_byte valbuf[MAX_REGISTER_SIZE]; struct value *arg = args[argnum]; - struct type *arg_type = check_typedef (VALUE_TYPE (arg)); + struct type *arg_type = check_typedef (value_type (arg)); int len = TYPE_LENGTH (arg_type); enum type_code typecode = TYPE_CODE (arg_type); @@ -2853,7 +2468,7 @@ mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function, fprintf_unfiltered (gdb_stdlog, " push"); } else - val = (char *) VALUE_CONTENTS (arg); + val = value_contents (arg); /* 32-bit ABIs always start floating point arguments in an even-numbered floating point register. Round the FP register @@ -3032,54 +2647,20 @@ mips_eabi_push_dummy_call (struct gdbarch *gdbarch, struct value *function, return sp; } -/* Given a return value in `regbuf' with a type `valtype', extract and - copy its value into `valbuf'. */ +/* Determin the return value convention being used. */ -static void -mips_eabi_extract_return_value (struct type *valtype, - char regbuf[], char *valbuf) +static enum return_value_convention +mips_eabi_return_value (struct gdbarch *gdbarch, + struct type *type, struct regcache *regcache, + gdb_byte *readbuf, const gdb_byte *writebuf) { - struct return_value_word lo; - struct return_value_word hi; - return_value_location (valtype, &hi, &lo); - - memcpy (valbuf + lo.buf_offset, - regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) + - lo.reg_offset, lo.len); - - if (hi.len > 0) - memcpy (valbuf + hi.buf_offset, - regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) + - hi.reg_offset, hi.len); + if (TYPE_LENGTH (type) > 2 * mips_abi_regsize (gdbarch)) + return RETURN_VALUE_STRUCT_CONVENTION; + if (readbuf) + memset (readbuf, 0, TYPE_LENGTH (type)); + return RETURN_VALUE_REGISTER_CONVENTION; } -/* Given a return value in `valbuf' with a type `valtype', write it's - value into the appropriate register. */ - -static void -mips_eabi_store_return_value (struct type *valtype, char *valbuf) -{ - char raw_buffer[MAX_REGISTER_SIZE]; - struct return_value_word lo; - struct return_value_word hi; - return_value_location (valtype, &hi, &lo); - - memset (raw_buffer, 0, sizeof (raw_buffer)); - memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len); - deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg), - raw_buffer, register_size (current_gdbarch, - lo.reg)); - - if (hi.len > 0) - { - memset (raw_buffer, 0, sizeof (raw_buffer)); - memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len); - deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg), - raw_buffer, - register_size (current_gdbarch, - hi.reg)); - } -} /* N32/N64 ABI stuff. */ @@ -3099,11 +2680,11 @@ mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, /* For shared libraries, "t9" needs to point at the function address. */ - regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr); + regcache_cooked_write_signed (regcache, MIPS_T9_REGNUM, func_addr); /* Set the return address register to point to the entry point of the program, where a breakpoint lies in wait. */ - regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr); + regcache_cooked_write_signed (regcache, MIPS_RA_REGNUM, bp_addr); /* First ensure that the stack and structure return address (if any) are properly aligned. The stack has to be at least 64-bit @@ -3116,7 +2697,7 @@ mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, /* Now make space on the stack for the args. */ for (argnum = 0; argnum < nargs; argnum++) - len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])), + len += align_up (TYPE_LENGTH (value_type (args[argnum])), mips_stack_argsize (gdbarch)); sp -= align_up (len, 16); @@ -3126,7 +2707,7 @@ mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, paddr_nz (sp), (long) align_up (len, 16)); /* Initialize the integer and float register pointers. */ - argreg = A0_REGNUM; + argreg = MIPS_A0_REGNUM; float_argreg = mips_fpa0_regnum (current_gdbarch); /* The struct_return pointer occupies the first parameter-passing reg. */ @@ -3144,9 +2725,9 @@ mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, from first to last. */ for (argnum = 0; argnum < nargs; argnum++) { - char *val; + const gdb_byte *val; struct value *arg = args[argnum]; - struct type *arg_type = check_typedef (VALUE_TYPE (arg)); + struct type *arg_type = check_typedef (value_type (arg)); int len = TYPE_LENGTH (arg_type); enum type_code typecode = TYPE_CODE (arg_type); @@ -3155,7 +2736,7 @@ mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, "mips_n32n64_push_dummy_call: %d len=%d type=%d", argnum + 1, len, (int) typecode); - val = (char *) VALUE_CONTENTS (arg); + val = value_contents (arg); if (fp_register_arg_p (typecode, arg_type) && float_argreg <= MIPS_LAST_FP_ARG_REGNUM) @@ -3321,7 +2902,7 @@ mips_n32n64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, static enum return_value_convention mips_n32n64_return_value (struct gdbarch *gdbarch, struct type *type, struct regcache *regcache, - void *readbuf, const void *writebuf) + gdb_byte *readbuf, const gdb_byte *writebuf) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); if (TYPE_CODE (type) == TYPE_CODE_STRUCT @@ -3382,7 +2963,7 @@ mips_n32n64_return_value (struct gdbarch *gdbarch, mips_xfer_lower. */ int offset; int regnum; - for (offset = 0, regnum = V0_REGNUM; + for (offset = 0, regnum = MIPS_V0_REGNUM; offset < TYPE_LENGTH (type); offset += register_size (current_gdbarch, regnum), regnum++) { @@ -3403,7 +2984,7 @@ mips_n32n64_return_value (struct gdbarch *gdbarch, justified. */ int offset; int regnum; - for (offset = 0, regnum = V0_REGNUM; + for (offset = 0, regnum = MIPS_V0_REGNUM; offset < TYPE_LENGTH (type); offset += register_size (current_gdbarch, regnum), regnum++) { @@ -3438,11 +3019,11 @@ mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function, /* For shared libraries, "t9" needs to point at the function address. */ - regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr); + regcache_cooked_write_signed (regcache, MIPS_T9_REGNUM, func_addr); /* Set the return address register to point to the entry point of the program, where a breakpoint lies in wait. */ - regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr); + regcache_cooked_write_signed (regcache, MIPS_RA_REGNUM, bp_addr); /* First ensure that the stack and structure return address (if any) are properly aligned. The stack has to be at least 64-bit @@ -3455,7 +3036,7 @@ mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function, /* Now make space on the stack for the args. */ for (argnum = 0; argnum < nargs; argnum++) - len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])), + len += align_up (TYPE_LENGTH (value_type (args[argnum])), mips_stack_argsize (gdbarch)); sp -= align_up (len, 16); @@ -3465,7 +3046,7 @@ mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function, paddr_nz (sp), (long) align_up (len, 16)); /* Initialize the integer and float register pointers. */ - argreg = A0_REGNUM; + argreg = MIPS_A0_REGNUM; float_argreg = mips_fpa0_regnum (current_gdbarch); /* The struct_return pointer occupies the first parameter-passing reg. */ @@ -3484,9 +3065,9 @@ mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function, from first to last. */ for (argnum = 0; argnum < nargs; argnum++) { - char *val; + const gdb_byte *val; struct value *arg = args[argnum]; - struct type *arg_type = check_typedef (VALUE_TYPE (arg)); + struct type *arg_type = check_typedef (value_type (arg)); int len = TYPE_LENGTH (arg_type); enum type_code typecode = TYPE_CODE (arg_type); @@ -3495,7 +3076,7 @@ mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function, "mips_o32_push_dummy_call: %d len=%d type=%d", argnum + 1, len, (int) typecode); - val = (char *) VALUE_CONTENTS (arg); + val = value_contents (arg); /* 32-bit ABIs always start floating point arguments in an even-numbered floating point register. Round the FP register @@ -3736,7 +3317,7 @@ mips_o32_push_dummy_call (struct gdbarch *gdbarch, struct value *function, static enum return_value_convention mips_o32_return_value (struct gdbarch *gdbarch, struct type *type, struct regcache *regcache, - void *readbuf, const void *writebuf) + gdb_byte *readbuf, const gdb_byte *writebuf) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); @@ -3784,7 +3365,7 @@ mips_o32_return_value (struct gdbarch *gdbarch, struct type *type, 0, 4, TARGET_BYTE_ORDER, readbuf, writebuf, 4); break; default: - internal_error (__FILE__, __LINE__, "bad switch"); + internal_error (__FILE__, __LINE__, _("bad switch")); } return RETURN_VALUE_REGISTER_CONVENTION; } @@ -3832,7 +3413,7 @@ mips_o32_return_value (struct gdbarch *gdbarch, struct type *type, mips_xfer_lower. */ int offset; int regnum; - for (offset = 0, regnum = V0_REGNUM; + for (offset = 0, regnum = MIPS_V0_REGNUM; offset < TYPE_LENGTH (type); offset += register_size (current_gdbarch, regnum), regnum++) { @@ -3855,7 +3436,7 @@ mips_o32_return_value (struct gdbarch *gdbarch, struct type *type, the ISA. mips_stack_argsize controls this. */ int offset; int regnum; - for (offset = 0, regnum = V0_REGNUM; + for (offset = 0, regnum = MIPS_V0_REGNUM; offset < TYPE_LENGTH (type); offset += mips_stack_argsize (gdbarch), regnum++) { @@ -3892,11 +3473,11 @@ mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, /* For shared libraries, "t9" needs to point at the function address. */ - regcache_cooked_write_signed (regcache, T9_REGNUM, func_addr); + regcache_cooked_write_signed (regcache, MIPS_T9_REGNUM, func_addr); /* Set the return address register to point to the entry point of the program, where a breakpoint lies in wait. */ - regcache_cooked_write_signed (regcache, RA_REGNUM, bp_addr); + regcache_cooked_write_signed (regcache, MIPS_RA_REGNUM, bp_addr); /* First ensure that the stack and structure return address (if any) are properly aligned. The stack has to be at least 64-bit @@ -3909,7 +3490,7 @@ mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, /* Now make space on the stack for the args. */ for (argnum = 0; argnum < nargs; argnum++) - len += align_up (TYPE_LENGTH (VALUE_TYPE (args[argnum])), + len += align_up (TYPE_LENGTH (value_type (args[argnum])), mips_stack_argsize (gdbarch)); sp -= align_up (len, 16); @@ -3919,7 +3500,7 @@ mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, paddr_nz (sp), (long) align_up (len, 16)); /* Initialize the integer and float register pointers. */ - argreg = A0_REGNUM; + argreg = MIPS_A0_REGNUM; float_argreg = mips_fpa0_regnum (current_gdbarch); /* The struct_return pointer occupies the first parameter-passing reg. */ @@ -3938,9 +3519,9 @@ mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, from first to last. */ for (argnum = 0; argnum < nargs; argnum++) { - char *val; + const gdb_byte *val; struct value *arg = args[argnum]; - struct type *arg_type = check_typedef (VALUE_TYPE (arg)); + struct type *arg_type = check_typedef (value_type (arg)); int len = TYPE_LENGTH (arg_type); enum type_code typecode = TYPE_CODE (arg_type); @@ -3949,7 +3530,7 @@ mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, "mips_o64_push_dummy_call: %d len=%d type=%d", argnum + 1, len, (int) typecode); - val = (char *) VALUE_CONTENTS (arg); + val = value_contents (arg); /* 32-bit ABIs always start floating point arguments in an even-numbered floating point register. Round the FP register @@ -4187,47 +3768,12 @@ mips_o64_push_dummy_call (struct gdbarch *gdbarch, struct value *function, return sp; } -static void -mips_o64_extract_return_value (struct type *valtype, - char regbuf[], char *valbuf) -{ - struct return_value_word lo; - struct return_value_word hi; - return_value_location (valtype, &hi, &lo); - - memcpy (valbuf + lo.buf_offset, - regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + lo.reg) + - lo.reg_offset, lo.len); - - if (hi.len > 0) - memcpy (valbuf + hi.buf_offset, - regbuf + DEPRECATED_REGISTER_BYTE (NUM_REGS + hi.reg) + - hi.reg_offset, hi.len); -} - -static void -mips_o64_store_return_value (struct type *valtype, char *valbuf) +static enum return_value_convention +mips_o64_return_value (struct gdbarch *gdbarch, + struct type *type, struct regcache *regcache, + gdb_byte *readbuf, const gdb_byte *writebuf) { - char raw_buffer[MAX_REGISTER_SIZE]; - struct return_value_word lo; - struct return_value_word hi; - return_value_location (valtype, &hi, &lo); - - memset (raw_buffer, 0, sizeof (raw_buffer)); - memcpy (raw_buffer + lo.reg_offset, valbuf + lo.buf_offset, lo.len); - deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (lo.reg), - raw_buffer, register_size (current_gdbarch, - lo.reg)); - - if (hi.len > 0) - { - memset (raw_buffer, 0, sizeof (raw_buffer)); - memcpy (raw_buffer + hi.reg_offset, valbuf + hi.buf_offset, hi.len); - deprecated_write_register_bytes (DEPRECATED_REGISTER_BYTE (hi.reg), - raw_buffer, - register_size (current_gdbarch, - hi.reg)); - } + return RETURN_VALUE_STRUCT_CONVENTION; } /* Floating point register management. @@ -4283,13 +3829,13 @@ mips_double_register_type (void) static void mips_read_fp_register_single (struct frame_info *frame, int regno, - char *rare_buffer) + gdb_byte *rare_buffer) { int raw_size = register_size (current_gdbarch, regno); - char *raw_buffer = alloca (raw_size); + gdb_byte *raw_buffer = alloca (raw_size); if (!frame_register_read (frame, regno, raw_buffer)) - error ("can't read register %d (%s)", regno, REGISTER_NAME (regno)); + error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno)); if (raw_size == 8) { /* We have a 64-bit value for this register. Find the low-order @@ -4315,7 +3861,7 @@ mips_read_fp_register_single (struct frame_info *frame, int regno, static void mips_read_fp_register_double (struct frame_info *frame, int regno, - char *rare_buffer) + gdb_byte *rare_buffer) { int raw_size = register_size (current_gdbarch, regno); @@ -4324,14 +3870,14 @@ mips_read_fp_register_double (struct frame_info *frame, int regno, /* We have a 64-bit value for this register, and we should use all 64 bits. */ if (!frame_register_read (frame, regno, rare_buffer)) - error ("can't read register %d (%s)", regno, REGISTER_NAME (regno)); + error (_("can't read register %d (%s)"), regno, REGISTER_NAME (regno)); } else { if ((regno - mips_regnum (current_gdbarch)->fp0) & 1) internal_error (__FILE__, __LINE__, - "mips_read_fp_register_double: bad access to " - "odd-numbered FP register"); + _("mips_read_fp_register_double: bad access to " + "odd-numbered FP register")); /* mips_read_fp_register_single will find the correct 32 bits from each register. */ @@ -4352,14 +3898,12 @@ static void mips_print_fp_register (struct ui_file *file, struct frame_info *frame, int regnum) { /* do values for FP (float) regs */ - char *raw_buffer; + gdb_byte *raw_buffer; double doub, flt1; /* doubles extracted from raw hex data */ int inv1, inv2; - raw_buffer = - (char *) alloca (2 * - register_size (current_gdbarch, - mips_regnum (current_gdbarch)->fp0)); + raw_buffer = alloca (2 * register_size (current_gdbarch, + mips_regnum (current_gdbarch)->fp0)); fprintf_filtered (file, "%s:", REGISTER_NAME (regnum)); fprintf_filtered (file, "%*s", 4 - (int) strlen (REGISTER_NAME (regnum)), @@ -4426,7 +3970,7 @@ mips_print_register (struct ui_file *file, struct frame_info *frame, int regnum, int all) { struct gdbarch *gdbarch = get_frame_arch (frame); - char raw_buffer[MAX_REGISTER_SIZE]; + gdb_byte raw_buffer[MAX_REGISTER_SIZE]; int offset; if (TYPE_CODE (gdbarch_register_type (gdbarch, regnum)) == TYPE_CODE_FLT) @@ -4487,7 +4031,7 @@ print_gp_register_row (struct ui_file *file, struct frame_info *frame, { struct gdbarch *gdbarch = get_frame_arch (frame); /* do values for GP (int) regs */ - char raw_buffer[MAX_REGISTER_SIZE]; + gdb_byte raw_buffer[MAX_REGISTER_SIZE]; int ncols = (mips_abi_regsize (gdbarch) == 8 ? 4 : 8); /* display cols per row */ int col, byte; int regnum; @@ -4524,7 +4068,7 @@ print_gp_register_row (struct ui_file *file, struct frame_info *frame, break; /* end row: reached FP register */ /* OK: get the data in raw format. */ if (!frame_register_read (frame, regnum, raw_buffer)) - error ("can't read register %d (%s)", regnum, REGISTER_NAME (regnum)); + error (_("can't read register %d (%s)"), regnum, REGISTER_NAME (regnum)); /* pad small registers */ for (byte = 0; byte < (mips_abi_regsize (current_gdbarch) @@ -4536,11 +4080,11 @@ print_gp_register_row (struct ui_file *file, struct frame_info *frame, register_size (current_gdbarch, regnum) - register_size (current_gdbarch, regnum); byte < register_size (current_gdbarch, regnum); byte++) - fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]); + fprintf_filtered (file, "%02x", raw_buffer[byte]); else for (byte = register_size (current_gdbarch, regnum) - 1; byte >= 0; byte--) - fprintf_filtered (file, "%02x", (unsigned char) raw_buffer[byte]); + fprintf_filtered (file, "%02x", raw_buffer[byte]); fprintf_filtered (file, " "); col++; } @@ -4560,7 +4104,7 @@ mips_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file, { gdb_assert (regnum >= NUM_REGS); if (*(REGISTER_NAME (regnum)) == '\0') - error ("Not a valid register for the current processor type"); + error (_("Not a valid register for the current processor type")); mips_print_register (file, frame, regnum, 0); fprintf_filtered (file, "\n"); @@ -4587,8 +4131,6 @@ mips_print_registers_info (struct gdbarch *gdbarch, struct ui_file *file, /* Is this a branch with a delay slot? */ -static int is_delayed (unsigned long); - static int is_delayed (unsigned long insn) { @@ -4604,212 +4146,24 @@ is_delayed (unsigned long insn) } int -mips_step_skips_delay (CORE_ADDR pc) +mips_single_step_through_delay (struct gdbarch *gdbarch, + struct frame_info *frame) { - char buf[MIPS_INSTLEN]; + CORE_ADDR pc = get_frame_pc (frame); + gdb_byte buf[MIPS_INSN32_SIZE]; /* There is no branch delay slot on MIPS16. */ - if (pc_is_mips16 (pc)) + if (mips_pc_is_mips16 (pc)) return 0; - if (target_read_memory (pc, buf, MIPS_INSTLEN) != 0) - /* If error reading memory, guess that it is not a delayed branch. */ + if (!breakpoint_here_p (pc + 4)) return 0; - return is_delayed ((unsigned long) - extract_unsigned_integer (buf, MIPS_INSTLEN)); -} - -/* Skip the PC past function prologue instructions (32-bit version). - This is a helper function for mips_skip_prologue. */ - -static CORE_ADDR -mips32_skip_prologue (CORE_ADDR pc) -{ - t_inst inst; - CORE_ADDR end_pc; - int seen_sp_adjust = 0; - int load_immediate_bytes = 0; - - /* Find an upper bound on the prologue. */ - end_pc = skip_prologue_using_sal (pc); - if (end_pc == 0) - end_pc = pc + 100; /* Magic. */ - - /* Skip the typical prologue instructions. These are the stack adjustment - instruction and the instructions that save registers on the stack - or in the gcc frame. */ - for (; pc < end_pc; pc += MIPS_INSTLEN) - { - unsigned long high_word; - - inst = mips_fetch_instruction (pc); - high_word = (inst >> 16) & 0xffff; - - if (high_word == 0x27bd /* addiu $sp,$sp,offset */ - || high_word == 0x67bd) /* daddiu $sp,$sp,offset */ - seen_sp_adjust = 1; - else if (inst == 0x03a1e823 || /* subu $sp,$sp,$at */ - inst == 0x03a8e823) /* subu $sp,$sp,$t0 */ - seen_sp_adjust = 1; - else if (((inst & 0xFFE00000) == 0xAFA00000 /* sw reg,n($sp) */ - || (inst & 0xFFE00000) == 0xFFA00000) /* sd reg,n($sp) */ - && (inst & 0x001F0000)) /* reg != $zero */ - continue; - else if ((inst & 0xFFE00000) == 0xE7A00000) /* swc1 freg,n($sp) */ - continue; - else if ((inst & 0xF3E00000) == 0xA3C00000 && (inst & 0x001F0000)) - /* sx reg,n($s8) */ - continue; /* reg != $zero */ - - /* move $s8,$sp. With different versions of gas this will be either - `addu $s8,$sp,$zero' or `or $s8,$sp,$zero' or `daddu s8,sp,$0'. - Accept any one of these. */ - else if (inst == 0x03A0F021 || inst == 0x03a0f025 || inst == 0x03a0f02d) - continue; - - else if ((inst & 0xFF9F07FF) == 0x00800021) /* move reg,$a0-$a3 */ - continue; - else if (high_word == 0x3c1c) /* lui $gp,n */ - continue; - else if (high_word == 0x279c) /* addiu $gp,$gp,n */ - continue; - else if (inst == 0x0399e021 /* addu $gp,$gp,$t9 */ - || inst == 0x033ce021) /* addu $gp,$t9,$gp */ - continue; - /* The following instructions load $at or $t0 with an immediate - value in preparation for a stack adjustment via - subu $sp,$sp,[$at,$t0]. These instructions could also initialize - a local variable, so we accept them only before a stack adjustment - instruction was seen. */ - else if (!seen_sp_adjust) - { - if (high_word == 0x3c01 || /* lui $at,n */ - high_word == 0x3c08) /* lui $t0,n */ - { - load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */ - continue; - } - else if (high_word == 0x3421 || /* ori $at,$at,n */ - high_word == 0x3508 || /* ori $t0,$t0,n */ - high_word == 0x3401 || /* ori $at,$zero,n */ - high_word == 0x3408) /* ori $t0,$zero,n */ - { - load_immediate_bytes += MIPS_INSTLEN; /* FIXME!! */ - continue; - } - else - break; - } - else - break; - } - - /* In a frameless function, we might have incorrectly - skipped some load immediate instructions. Undo the skipping - if the load immediate was not followed by a stack adjustment. */ - if (load_immediate_bytes && !seen_sp_adjust) - pc -= load_immediate_bytes; - return pc; -} - -/* Skip the PC past function prologue instructions (16-bit version). - This is a helper function for mips_skip_prologue. */ - -static CORE_ADDR -mips16_skip_prologue (CORE_ADDR pc) -{ - CORE_ADDR end_pc; - int extend_bytes = 0; - int prev_extend_bytes; - - /* Table of instructions likely to be found in a function prologue. */ - static struct - { - unsigned short inst; - unsigned short mask; - } - table[] = - { - { - 0x6300, 0xff00} - , /* addiu $sp,offset */ - { - 0xfb00, 0xff00} - , /* daddiu $sp,offset */ - { - 0xd000, 0xf800} - , /* sw reg,n($sp) */ - { - 0xf900, 0xff00} - , /* sd reg,n($sp) */ - { - 0x6200, 0xff00} - , /* sw $ra,n($sp) */ - { - 0xfa00, 0xff00} - , /* sd $ra,n($sp) */ - { - 0x673d, 0xffff} - , /* move $s1,sp */ - { - 0xd980, 0xff80} - , /* sw $a0-$a3,n($s1) */ - { - 0x6704, 0xff1c} - , /* move reg,$a0-$a3 */ - { - 0xe809, 0xf81f} - , /* entry pseudo-op */ - { - 0x0100, 0xff00} - , /* addiu $s1,$sp,n */ - { - 0, 0} /* end of table marker */ - }; - - /* Find an upper bound on the prologue. */ - end_pc = skip_prologue_using_sal (pc); - if (end_pc == 0) - end_pc = pc + 100; /* Magic. */ - - /* Skip the typical prologue instructions. These are the stack adjustment - instruction and the instructions that save registers on the stack - or in the gcc frame. */ - for (; pc < end_pc; pc += MIPS16_INSTLEN) - { - unsigned short inst; - int i; - - inst = mips_fetch_instruction (pc); - - /* Normally we ignore an extend instruction. However, if it is - not followed by a valid prologue instruction, we must adjust - the pc back over the extend so that it won't be considered - part of the prologue. */ - if ((inst & 0xf800) == 0xf000) /* extend */ - { - extend_bytes = MIPS16_INSTLEN; - continue; - } - prev_extend_bytes = extend_bytes; - extend_bytes = 0; - - /* Check for other valid prologue instructions besides extend. */ - for (i = 0; table[i].mask != 0; i++) - if ((inst & table[i].mask) == table[i].inst) /* found, get out */ - break; - if (table[i].mask != 0) /* it was in table? */ - continue; /* ignore it */ - else - /* non-prologue */ - { - /* Return the current pc, adjusted backwards by 2 if - the previous instruction was an extend. */ - return pc - prev_extend_bytes; - } - } - return pc; + if (!safe_frame_unwind_memory (frame, pc, buf, sizeof buf)) + /* If error reading memory, guess that it is not a delayed + branch. */ + return 0; + return is_delayed (extract_unsigned_integer (buf, sizeof buf)); } /* To skip prologues, I use this predicate. Returns either PC itself @@ -4824,22 +4178,33 @@ mips16_skip_prologue (CORE_ADDR pc) static CORE_ADDR mips_skip_prologue (CORE_ADDR pc) { + CORE_ADDR limit_pc; + CORE_ADDR func_addr; + /* See if we can determine the end of the prologue via the symbol table. If so, then return either PC, or the PC after the prologue, whichever is greater. */ - - CORE_ADDR post_prologue_pc = after_prologue (pc, NULL); - - if (post_prologue_pc != 0) - return max (pc, post_prologue_pc); + if (find_pc_partial_function (pc, NULL, &func_addr, NULL)) + { + CORE_ADDR post_prologue_pc = skip_prologue_using_sal (func_addr); + if (post_prologue_pc != 0) + return max (pc, post_prologue_pc); + } /* Can't determine prologue from the symbol table, need to examine instructions. */ - if (pc_is_mips16 (pc)) - return mips16_skip_prologue (pc); + /* Find an upper limit on the function prologue using the debug + information. If the debug information could not be used to provide + that bound, then use an arbitrary large number as the upper bound. */ + limit_pc = skip_prologue_using_sal (pc); + if (limit_pc == 0) + limit_pc = pc + 100; /* Magic. */ + + if (mips_pc_is_mips16 (pc)) + return mips16_scan_prologue (pc, limit_pc, NULL, NULL); else - return mips32_skip_prologue (pc); + return mips32_scan_prologue (pc, limit_pc, NULL, NULL); } /* Root of all "set mips "/"show mips " commands. This will eventually be @@ -4877,7 +4242,7 @@ show_mipsfpu_command (char *args, int from_tty) fpu = "absent (none)"; break; default: - internal_error (__FILE__, __LINE__, "bad switch"); + internal_error (__FILE__, __LINE__, _("bad switch")); } if (mips_fpu_type_auto) printf_unfiltered @@ -4908,7 +4273,7 @@ set_mipsfpu_single_command (char *args, int from_tty) instead of relying on globals. Doing that would let generic code handle the search for this specific architecture. */ if (!gdbarch_update_p (info)) - internal_error (__FILE__, __LINE__, "set mipsfpu failed"); + internal_error (__FILE__, __LINE__, _("set mipsfpu failed")); } static void @@ -4922,7 +4287,7 @@ set_mipsfpu_double_command (char *args, int from_tty) instead of relying on globals. Doing that would let generic code handle the search for this specific architecture. */ if (!gdbarch_update_p (info)) - internal_error (__FILE__, __LINE__, "set mipsfpu failed"); + internal_error (__FILE__, __LINE__, _("set mipsfpu failed")); } static void @@ -4936,7 +4301,7 @@ set_mipsfpu_none_command (char *args, int from_tty) instead of relying on globals. Doing that would let generic code handle the search for this specific architecture. */ if (!gdbarch_update_p (info)) - internal_error (__FILE__, __LINE__, "set mipsfpu failed"); + internal_error (__FILE__, __LINE__, _("set mipsfpu failed")); } static void @@ -4957,7 +4322,7 @@ deprecated_mips_set_processor_regs_hack (void) struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); CORE_ADDR prid; - prid = read_register (PRID_REGNUM); + prid = read_register (MIPS_PRID_REGNUM); if ((prid & ~0xf) == 0x700) tdep->mips_processor_reg_names = mips_r3041_reg_names; @@ -4977,34 +4342,13 @@ static int gdb_print_insn_mips (bfd_vma memaddr, struct disassemble_info *info) { struct gdbarch_tdep *tdep = gdbarch_tdep (current_gdbarch); - mips_extra_func_info_t proc_desc; - - /* Search for the function containing this address. Set the low bit - of the address when searching, in case we were given an even address - that is the start of a 16-bit function. If we didn't do this, - the search would fail because the symbol table says the function - starts at an odd address, i.e. 1 byte past the given address. */ - memaddr = ADDR_BITS_REMOVE (memaddr); - proc_desc = non_heuristic_proc_desc (make_mips16_addr (memaddr), NULL); - - /* Make an attempt to determine if this is a 16-bit function. If - the procedure descriptor exists and the address therein is odd, - it's definitely a 16-bit function. Otherwise, we have to just - guess that if the address passed in is odd, it's 16-bits. */ + /* FIXME: cagney/2003-06-26: Is this even necessary? The disassembler needs to be able to locally determine the ISA, and not rely on GDB. Otherwize the stand-alone 'objdump -d' will not work. */ - if (proc_desc) - { - if (pc_is_mips16 (PROC_LOW_ADDR (proc_desc))) - info->mach = bfd_mach_mips16; - } - else - { - if (pc_is_mips16 (memaddr)) - info->mach = bfd_mach_mips16; - } + if (mips_pc_is_mips16 (memaddr)) + info->mach = bfd_mach_mips16; /* Round down the instruction address to the appropriate boundary. */ memaddr &= (info->mach == bfd_mach_mips16 ? ~1 : ~3); @@ -5042,14 +4386,14 @@ gdb_print_insn_mips (bfd_vma memaddr, struct disassemble_info *info) (if necessary) to point to the actual memory location where the breakpoint should be inserted. */ -static const unsigned char * +static const gdb_byte * mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr) { if (TARGET_BYTE_ORDER == BFD_ENDIAN_BIG) { - if (pc_is_mips16 (*pcptr)) + if (mips_pc_is_mips16 (*pcptr)) { - static unsigned char mips16_big_breakpoint[] = { 0xe8, 0xa5 }; + static gdb_byte mips16_big_breakpoint[] = { 0xe8, 0xa5 }; *pcptr = unmake_mips16_addr (*pcptr); *lenptr = sizeof (mips16_big_breakpoint); return mips16_big_breakpoint; @@ -5059,9 +4403,9 @@ mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr) /* The IDT board uses an unusual breakpoint value, and sometimes gets confused when it sees the usual MIPS breakpoint instruction. */ - static unsigned char big_breakpoint[] = { 0, 0x5, 0, 0xd }; - static unsigned char pmon_big_breakpoint[] = { 0, 0, 0, 0xd }; - static unsigned char idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd }; + static gdb_byte big_breakpoint[] = { 0, 0x5, 0, 0xd }; + static gdb_byte pmon_big_breakpoint[] = { 0, 0, 0, 0xd }; + static gdb_byte idt_big_breakpoint[] = { 0, 0, 0x0a, 0xd }; *lenptr = sizeof (big_breakpoint); @@ -5077,18 +4421,18 @@ mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr) } else { - if (pc_is_mips16 (*pcptr)) + if (mips_pc_is_mips16 (*pcptr)) { - static unsigned char mips16_little_breakpoint[] = { 0xa5, 0xe8 }; + static gdb_byte mips16_little_breakpoint[] = { 0xa5, 0xe8 }; *pcptr = unmake_mips16_addr (*pcptr); *lenptr = sizeof (mips16_little_breakpoint); return mips16_little_breakpoint; } else { - static unsigned char little_breakpoint[] = { 0xd, 0, 0x5, 0 }; - static unsigned char pmon_little_breakpoint[] = { 0xd, 0, 0, 0 }; - static unsigned char idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 }; + static gdb_byte little_breakpoint[] = { 0xd, 0, 0x5, 0 }; + static gdb_byte pmon_little_breakpoint[] = { 0xd, 0, 0, 0 }; + static gdb_byte idt_little_breakpoint[] = { 0xd, 0x0a, 0, 0 }; *lenptr = sizeof (little_breakpoint); @@ -5118,13 +4462,10 @@ mips_breakpoint_from_pc (CORE_ADDR *pcptr, int *lenptr) a return stub and the target PC is in $18. See the source code for the stubs in gcc/config/mips/mips16.S for - gory details. - - This function implements the SKIP_TRAMPOLINE_CODE macro. - */ + gory details. */ static CORE_ADDR -mips_skip_stub (CORE_ADDR pc) +mips_skip_trampoline_code (CORE_ADDR pc) { char *name; CORE_ADDR start_addr; @@ -5137,7 +4478,7 @@ mips_skip_stub (CORE_ADDR pc) target PC is in $31 ($ra). */ if (strcmp (name, "__mips16_ret_sf") == 0 || strcmp (name, "__mips16_ret_df") == 0) - return read_signed_register (RA_REGNUM); + return read_signed_register (MIPS_RA_REGNUM); if (strncmp (name, "__mips16_call_stub_", 19) == 0) { @@ -5167,7 +4508,7 @@ mips_skip_stub (CORE_ADDR pc) address from those two instructions. */ CORE_ADDR target_pc = read_signed_register (2); - t_inst inst; + ULONGEST inst; int i; /* See if the name of the target function is __fn_stub_*. */ @@ -5182,7 +4523,7 @@ mips_skip_stub (CORE_ADDR pc) /* Scan through this _fn_stub_ code for the lui/addiu pair. The limit on the search is arbitrarily set to 20 instructions. FIXME. */ - for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSTLEN) + for (i = 0, pc = 0; i < 20; i++, target_pc += MIPS_INSN32_SIZE) { inst = mips_fetch_instruction (target_pc); if ((inst & 0xffff0000) == 0x3c010000) /* lui $at */ @@ -5203,82 +4544,6 @@ mips_skip_stub (CORE_ADDR pc) return 0; /* not a stub */ } - -/* Return non-zero if the PC is inside a call thunk (aka stub or trampoline). - This implements the IN_SOLIB_CALL_TRAMPOLINE macro. */ - -static int -mips_in_call_stub (CORE_ADDR pc, char *name) -{ - CORE_ADDR start_addr; - - /* Find the starting address of the function containing the PC. If the - caller didn't give us a name, look it up at the same time. */ - if (find_pc_partial_function (pc, name ? NULL : &name, &start_addr, NULL) == - 0) - return 0; - - if (strncmp (name, "__mips16_call_stub_", 19) == 0) - { - /* If the PC is in __mips16_call_stub_{1..10}, this is a call stub. */ - if (name[19] >= '0' && name[19] <= '9') - return 1; - /* If the PC at the start of __mips16_call_stub_{s,d}f_{0..10}, i.e. - before the jal instruction, this is effectively a call stub. */ - else if (name[19] == 's' || name[19] == 'd') - return pc == start_addr; - } - - return 0; /* not a stub */ -} - - -/* Return non-zero if the PC is inside a return thunk (aka stub or trampoline). - This implements the IN_SOLIB_RETURN_TRAMPOLINE macro. */ - -static int -mips_in_return_stub (CORE_ADDR pc, char *name) -{ - CORE_ADDR start_addr; - - /* Find the starting address of the function containing the PC. */ - if (find_pc_partial_function (pc, NULL, &start_addr, NULL) == 0) - return 0; - - /* If the PC is in __mips16_ret_{d,s}f, this is a return stub. */ - if (strcmp (name, "__mips16_ret_sf") == 0 - || strcmp (name, "__mips16_ret_df") == 0) - return 1; - - /* If the PC is in __mips16_call_stub_{s,d}f_{0..10} but not at the start, - i.e. after the jal instruction, this is effectively a return stub. */ - if (strncmp (name, "__mips16_call_stub_", 19) == 0 - && (name[19] == 's' || name[19] == 'd') && pc != start_addr) - return 1; - - return 0; /* not a stub */ -} - - -/* Return non-zero if the PC is in a library helper function that should - be ignored. This implements the IGNORE_HELPER_CALL macro. */ - -int -mips_ignore_helper (CORE_ADDR pc) -{ - char *name; - - /* Find the starting address and name of the function containing the PC. */ - if (find_pc_partial_function (pc, &name, NULL, NULL) == 0) - return 0; - - /* If the PC is in __mips16_ret_{d,s}f, this is a library helper function - that we want to ignore. */ - return (strcmp (name, "__mips16_ret_sf") == 0 - || strcmp (name, "__mips16_ret_df") == 0); -} - - /* Convert a dbx stab register number (from `r' declaration) to a GDB [1 * NUM_REGS .. 2 * NUM_REGS) REGNUM. */ @@ -5345,9 +4610,10 @@ mips_register_sim_regno (int regnum) guarenteed to be correctly sign extended. */ static CORE_ADDR -mips_integer_to_address (struct type *type, void *buf) +mips_integer_to_address (struct gdbarch *gdbarch, + struct type *type, const bfd_byte *buf) { - char *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr)); + gdb_byte *tmp = alloca (TYPE_LENGTH (builtin_type_void_data_ptr)); LONGEST val = unpack_long (type, buf); store_signed_integer (tmp, TYPE_LENGTH (builtin_type_void_data_ptr), val); return extract_signed_integer (tmp, @@ -5379,7 +4645,7 @@ mips_find_abi_section (bfd *abfd, asection *sect, void *obj) else if (strcmp (name, ".mdebug.eabi64") == 0) *abip = MIPS_ABI_EABI64; else - warning ("unsupported ABI %s.", name + 8); + warning (_("unsupported ABI %s."), name + 8); } static enum mips_abi @@ -5391,7 +4657,7 @@ global_mips_abi (void) if (mips_abi_strings[i] == mips_abi_string) return (enum mips_abi) i; - internal_error (__FILE__, __LINE__, "unknown ABI string"); + internal_error (__FILE__, __LINE__, _("unknown ABI string")); } static struct gdbarch * @@ -5627,7 +4893,7 @@ mips_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) case MIPS_ABI_O32: set_gdbarch_push_dummy_call (gdbarch, mips_o32_push_dummy_call); set_gdbarch_return_value (gdbarch, mips_o32_return_value); - tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1; + tdep->mips_last_arg_regnum = MIPS_A0_REGNUM + 4 - 1; tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 4 - 1; tdep->default_mask_address_p = 0; set_gdbarch_long_bit (gdbarch, 32); @@ -5636,72 +4902,62 @@ mips_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) break; case MIPS_ABI_O64: set_gdbarch_push_dummy_call (gdbarch, mips_o64_push_dummy_call); - set_gdbarch_deprecated_store_return_value (gdbarch, - mips_o64_store_return_value); - set_gdbarch_deprecated_extract_return_value (gdbarch, - mips_o64_extract_return_value); - tdep->mips_last_arg_regnum = A0_REGNUM + 4 - 1; + set_gdbarch_return_value (gdbarch, mips_o64_return_value); + tdep->mips_last_arg_regnum = MIPS_A0_REGNUM + 4 - 1; tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 4 - 1; tdep->default_mask_address_p = 0; set_gdbarch_long_bit (gdbarch, 32); set_gdbarch_ptr_bit (gdbarch, 32); set_gdbarch_long_long_bit (gdbarch, 64); - set_gdbarch_deprecated_use_struct_convention (gdbarch, always_use_struct_convention); break; case MIPS_ABI_EABI32: set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call); - set_gdbarch_deprecated_store_return_value (gdbarch, - mips_eabi_store_return_value); - set_gdbarch_deprecated_extract_return_value (gdbarch, - mips_eabi_extract_return_value); - tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1; + set_gdbarch_return_value (gdbarch, mips_eabi_return_value); + tdep->mips_last_arg_regnum = MIPS_A0_REGNUM + 8 - 1; tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1; tdep->default_mask_address_p = 0; set_gdbarch_long_bit (gdbarch, 32); set_gdbarch_ptr_bit (gdbarch, 32); set_gdbarch_long_long_bit (gdbarch, 64); - set_gdbarch_deprecated_reg_struct_has_addr - (gdbarch, mips_eabi_reg_struct_has_addr); - set_gdbarch_deprecated_use_struct_convention (gdbarch, mips_eabi_use_struct_convention); break; case MIPS_ABI_EABI64: set_gdbarch_push_dummy_call (gdbarch, mips_eabi_push_dummy_call); - set_gdbarch_deprecated_store_return_value (gdbarch, - mips_eabi_store_return_value); - set_gdbarch_deprecated_extract_return_value (gdbarch, - mips_eabi_extract_return_value); - tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1; + set_gdbarch_return_value (gdbarch, mips_eabi_return_value); + tdep->mips_last_arg_regnum = MIPS_A0_REGNUM + 8 - 1; tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1; tdep->default_mask_address_p = 0; set_gdbarch_long_bit (gdbarch, 64); set_gdbarch_ptr_bit (gdbarch, 64); set_gdbarch_long_long_bit (gdbarch, 64); - set_gdbarch_deprecated_reg_struct_has_addr - (gdbarch, mips_eabi_reg_struct_has_addr); - set_gdbarch_deprecated_use_struct_convention (gdbarch, mips_eabi_use_struct_convention); break; case MIPS_ABI_N32: set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call); set_gdbarch_return_value (gdbarch, mips_n32n64_return_value); - tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1; + tdep->mips_last_arg_regnum = MIPS_A0_REGNUM + 8 - 1; tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1; tdep->default_mask_address_p = 0; set_gdbarch_long_bit (gdbarch, 32); set_gdbarch_ptr_bit (gdbarch, 32); set_gdbarch_long_long_bit (gdbarch, 64); + set_gdbarch_long_double_bit (gdbarch, 128); + set_gdbarch_long_double_format (gdbarch, + &floatformat_n32n64_long_double_big); break; case MIPS_ABI_N64: set_gdbarch_push_dummy_call (gdbarch, mips_n32n64_push_dummy_call); set_gdbarch_return_value (gdbarch, mips_n32n64_return_value); - tdep->mips_last_arg_regnum = A0_REGNUM + 8 - 1; + tdep->mips_last_arg_regnum = MIPS_A0_REGNUM + 8 - 1; tdep->mips_last_fp_arg_regnum = tdep->regnum->fp0 + 12 + 8 - 1; tdep->default_mask_address_p = 0; set_gdbarch_long_bit (gdbarch, 64); set_gdbarch_ptr_bit (gdbarch, 64); set_gdbarch_long_long_bit (gdbarch, 64); + set_gdbarch_long_double_bit (gdbarch, 128); + set_gdbarch_long_double_format (gdbarch, + &floatformat_n32n64_long_double_big); break; default: - internal_error (__FILE__, __LINE__, "unknown ABI in switch"); + internal_error (__FILE__, __LINE__, _("unknown ABI in switch")); } /* FIXME: jlarmour/2000-04-07: There *is* a flag EF_MIPS_32BIT_MODE @@ -5782,26 +5038,20 @@ mips_gdbarch_init (struct gdbarch_info info, struct gdbarch_list *arches) is sitting on? */ set_gdbarch_have_nonsteppable_watchpoint (gdbarch, 1); - set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_stub); + set_gdbarch_skip_trampoline_code (gdbarch, mips_skip_trampoline_code); - /* NOTE drow/2004-02-11: We overload the core solib trampoline code - to support MIPS16. This is a bad thing. Make sure not to do it - if we have an OS ABI that actually supports shared libraries, since - shared library support is more important. If we have an OS someday - that supports both shared libraries and MIPS16, we'll have to find - a better place for these. */ - if (info.osabi == GDB_OSABI_UNKNOWN) - { - set_gdbarch_in_solib_call_trampoline (gdbarch, mips_in_call_stub); - set_gdbarch_in_solib_return_trampoline (gdbarch, mips_in_return_stub); - } + set_gdbarch_single_step_through_delay (gdbarch, mips_single_step_through_delay); /* Hook in OS ABI-specific overrides, if they have been registered. */ gdbarch_init_osabi (info, gdbarch); /* Unwind the frame. */ - frame_unwind_append_sniffer (gdbarch, mips_mdebug_frame_sniffer); - frame_base_append_sniffer (gdbarch, mips_mdebug_frame_base_sniffer); + frame_unwind_append_sniffer (gdbarch, mips_stub_frame_sniffer); + frame_unwind_append_sniffer (gdbarch, mips_insn16_frame_sniffer); + frame_unwind_append_sniffer (gdbarch, mips_insn32_frame_sniffer); + frame_base_append_sniffer (gdbarch, mips_stub_frame_base_sniffer); + frame_base_append_sniffer (gdbarch, mips_insn16_frame_base_sniffer); + frame_base_append_sniffer (gdbarch, mips_insn32_frame_base_sniffer); return gdbarch; } @@ -5820,11 +5070,16 @@ mips_abi_update (char *ignore_args, int from_tty, struct cmd_list_element *c) /* Print out which MIPS ABI is in use. */ static void -show_mips_abi (char *ignore_args, int from_tty) +show_mips_abi (struct ui_file *file, + int from_tty, + struct cmd_list_element *ignored_cmd, + const char *ignored_value) { if (gdbarch_bfd_arch_info (current_gdbarch)->arch != bfd_arch_mips) - printf_filtered - ("The MIPS ABI is unknown because the current architecture is not MIPS.\n"); + fprintf_filtered + (file, + "The MIPS ABI is unknown because the current architecture " + "is not MIPS.\n"); else { enum mips_abi global_abi = global_mips_abi (); @@ -5832,18 +5087,21 @@ show_mips_abi (char *ignore_args, int from_tty) const char *actual_abi_str = mips_abi_strings[actual_abi]; if (global_abi == MIPS_ABI_UNKNOWN) - printf_filtered - ("The MIPS ABI is set automatically (currently \"%s\").\n", + fprintf_filtered + (file, + "The MIPS ABI is set automatically (currently \"%s\").\n", actual_abi_str); else if (global_abi == actual_abi) - printf_filtered - ("The MIPS ABI is assumed to be \"%s\" (due to user setting).\n", + fprintf_filtered + (file, + "The MIPS ABI is assumed to be \"%s\" (due to user setting).\n", actual_abi_str); else { /* Probably shouldn't happen... */ - printf_filtered - ("The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n", + fprintf_filtered + (file, + "The (auto detected) MIPS ABI \"%s\" is in use even though the user setting was \"%s\".\n", actual_abi_str, mips_abi_strings[global_abi]); } } @@ -5913,167 +5171,6 @@ mips_dump_tdep (struct gdbarch *current_gdbarch, struct ui_file *file) fprintf_unfiltered (file, "mips_dump_tdep: mips_stack_argsize() = %d\n", mips_stack_argsize (current_gdbarch)); - fprintf_unfiltered (file, "mips_dump_tdep: A0_REGNUM = %d\n", A0_REGNUM); - fprintf_unfiltered (file, - "mips_dump_tdep: ADDR_BITS_REMOVE # %s\n", - XSTRING (ADDR_BITS_REMOVE (ADDR))); - fprintf_unfiltered (file, - "mips_dump_tdep: ATTACH_DETACH # %s\n", - XSTRING (ATTACH_DETACH)); - fprintf_unfiltered (file, - "mips_dump_tdep: DWARF_REG_TO_REGNUM # %s\n", - XSTRING (DWARF_REG_TO_REGNUM (REGNUM))); - fprintf_unfiltered (file, - "mips_dump_tdep: ECOFF_REG_TO_REGNUM # %s\n", - XSTRING (ECOFF_REG_TO_REGNUM (REGNUM))); - fprintf_unfiltered (file, - "mips_dump_tdep: FIRST_EMBED_REGNUM = %d\n", - FIRST_EMBED_REGNUM); - fprintf_unfiltered (file, - "mips_dump_tdep: IGNORE_HELPER_CALL # %s\n", - XSTRING (IGNORE_HELPER_CALL (PC))); - fprintf_unfiltered (file, - "mips_dump_tdep: IN_SOLIB_CALL_TRAMPOLINE # %s\n", - XSTRING (IN_SOLIB_CALL_TRAMPOLINE (PC, NAME))); - fprintf_unfiltered (file, - "mips_dump_tdep: IN_SOLIB_RETURN_TRAMPOLINE # %s\n", - XSTRING (IN_SOLIB_RETURN_TRAMPOLINE (PC, NAME))); - fprintf_unfiltered (file, - "mips_dump_tdep: LAST_EMBED_REGNUM = %d\n", - LAST_EMBED_REGNUM); -#ifdef MACHINE_CPROC_FP_OFFSET - fprintf_unfiltered (file, - "mips_dump_tdep: MACHINE_CPROC_FP_OFFSET = %d\n", - MACHINE_CPROC_FP_OFFSET); -#endif -#ifdef MACHINE_CPROC_PC_OFFSET - fprintf_unfiltered (file, - "mips_dump_tdep: MACHINE_CPROC_PC_OFFSET = %d\n", - MACHINE_CPROC_PC_OFFSET); -#endif -#ifdef MACHINE_CPROC_SP_OFFSET - fprintf_unfiltered (file, - "mips_dump_tdep: MACHINE_CPROC_SP_OFFSET = %d\n", - MACHINE_CPROC_SP_OFFSET); -#endif - fprintf_unfiltered (file, - "mips_dump_tdep: MIPS16_INSTLEN = %d\n", - MIPS16_INSTLEN); - fprintf_unfiltered (file, "mips_dump_tdep: MIPS_DEFAULT_ABI = FIXME!\n"); - fprintf_unfiltered (file, - "mips_dump_tdep: MIPS_EFI_SYMBOL_NAME = multi-arch!!\n"); - fprintf_unfiltered (file, - "mips_dump_tdep: MIPS_INSTLEN = %d\n", MIPS_INSTLEN); - fprintf_unfiltered (file, - "mips_dump_tdep: MIPS_LAST_ARG_REGNUM = %d (%d regs)\n", - MIPS_LAST_ARG_REGNUM, - MIPS_LAST_ARG_REGNUM - A0_REGNUM + 1); - fprintf_unfiltered (file, - "mips_dump_tdep: MIPS_NUMREGS = %d\n", MIPS_NUMREGS); - fprintf_unfiltered (file, - "mips_dump_tdep: mips_abi_regsize() = %d\n", - mips_abi_regsize (current_gdbarch)); - fprintf_unfiltered (file, - "mips_dump_tdep: PRID_REGNUM = %d\n", PRID_REGNUM); - fprintf_unfiltered (file, - "mips_dump_tdep: PROC_DESC_IS_DUMMY = function?\n"); - fprintf_unfiltered (file, - "mips_dump_tdep: PROC_FRAME_ADJUST = function?\n"); - fprintf_unfiltered (file, - "mips_dump_tdep: PROC_FRAME_OFFSET = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PROC_FRAME_REG = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_MASK = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PROC_FREG_OFFSET = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PROC_HIGH_ADDR = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PROC_LOW_ADDR = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PROC_PC_REG = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_MASK = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PROC_REG_OFFSET = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PROC_SYMBOL = function?\n"); - fprintf_unfiltered (file, "mips_dump_tdep: PS_REGNUM = %d\n", PS_REGNUM); - fprintf_unfiltered (file, "mips_dump_tdep: RA_REGNUM = %d\n", RA_REGNUM); -#ifdef SAVED_BYTES - fprintf_unfiltered (file, - "mips_dump_tdep: SAVED_BYTES = %d\n", SAVED_BYTES); -#endif -#ifdef SAVED_FP - fprintf_unfiltered (file, "mips_dump_tdep: SAVED_FP = %d\n", SAVED_FP); -#endif -#ifdef SAVED_PC - fprintf_unfiltered (file, "mips_dump_tdep: SAVED_PC = %d\n", SAVED_PC); -#endif - fprintf_unfiltered (file, - "mips_dump_tdep: SETUP_ARBITRARY_FRAME # %s\n", - XSTRING (SETUP_ARBITRARY_FRAME (NUMARGS, ARGS))); - fprintf_unfiltered (file, - "mips_dump_tdep: SET_PROC_DESC_IS_DUMMY = function?\n"); - fprintf_unfiltered (file, - "mips_dump_tdep: SKIP_TRAMPOLINE_CODE # %s\n", - XSTRING (SKIP_TRAMPOLINE_CODE (PC))); - fprintf_unfiltered (file, - "mips_dump_tdep: SOFTWARE_SINGLE_STEP # %s\n", - XSTRING (SOFTWARE_SINGLE_STEP (SIG, BP_P))); - fprintf_unfiltered (file, - "mips_dump_tdep: SOFTWARE_SINGLE_STEP_P () = %d\n", - SOFTWARE_SINGLE_STEP_P ()); - fprintf_unfiltered (file, - "mips_dump_tdep: STAB_REG_TO_REGNUM # %s\n", - XSTRING (STAB_REG_TO_REGNUM (REGNUM))); -#ifdef STACK_END_ADDR - fprintf_unfiltered (file, - "mips_dump_tdep: STACK_END_ADDR = %d\n", - STACK_END_ADDR); -#endif - fprintf_unfiltered (file, - "mips_dump_tdep: STEP_SKIPS_DELAY # %s\n", - XSTRING (STEP_SKIPS_DELAY (PC))); - fprintf_unfiltered (file, - "mips_dump_tdep: STEP_SKIPS_DELAY_P = %d\n", - STEP_SKIPS_DELAY_P); - fprintf_unfiltered (file, - "mips_dump_tdep: STOPPED_BY_WATCHPOINT # %s\n", - XSTRING (STOPPED_BY_WATCHPOINT (WS))); - fprintf_unfiltered (file, "mips_dump_tdep: T9_REGNUM = %d\n", T9_REGNUM); - fprintf_unfiltered (file, - "mips_dump_tdep: TABULAR_REGISTER_OUTPUT = used?\n"); - fprintf_unfiltered (file, - "mips_dump_tdep: TARGET_CAN_USE_HARDWARE_WATCHPOINT # %s\n", - XSTRING (TARGET_CAN_USE_HARDWARE_WATCHPOINT - (TYPE, CNT, OTHERTYPE))); - fprintf_unfiltered (file, - "mips_dump_tdep: TARGET_HAS_HARDWARE_WATCHPOINTS # %s\n", - XSTRING (TARGET_HAS_HARDWARE_WATCHPOINTS)); -#ifdef TRACE_CLEAR - fprintf_unfiltered (file, - "mips_dump_tdep: TRACE_CLEAR # %s\n", - XSTRING (TRACE_CLEAR (THREAD, STATE))); -#endif -#ifdef TRACE_FLAVOR - fprintf_unfiltered (file, - "mips_dump_tdep: TRACE_FLAVOR = %d\n", TRACE_FLAVOR); -#endif -#ifdef TRACE_FLAVOR_SIZE - fprintf_unfiltered (file, - "mips_dump_tdep: TRACE_FLAVOR_SIZE = %d\n", - TRACE_FLAVOR_SIZE); -#endif -#ifdef TRACE_SET - fprintf_unfiltered (file, - "mips_dump_tdep: TRACE_SET # %s\n", - XSTRING (TRACE_SET (X, STATE))); -#endif -#ifdef UNUSED_REGNUM - fprintf_unfiltered (file, - "mips_dump_tdep: UNUSED_REGNUM = %d\n", UNUSED_REGNUM); -#endif - fprintf_unfiltered (file, "mips_dump_tdep: V0_REGNUM = %d\n", V0_REGNUM); - fprintf_unfiltered (file, - "mips_dump_tdep: VM_MIN_ADDRESS = %ld\n", - (long) VM_MIN_ADDRESS); - fprintf_unfiltered (file, - "mips_dump_tdep: ZERO_REGNUM = %d\n", ZERO_REGNUM); - fprintf_unfiltered (file, - "mips_dump_tdep: _PROC_MAGIC_ = %d\n", _PROC_MAGIC_); } extern initialize_file_ftype _initialize_mips_tdep; /* -Wmissing-prototypes */ @@ -6087,7 +5184,7 @@ _initialize_mips_tdep (void) mips_abi_string = mips_abi_strings[MIPS_ABI_UNKNOWN]; if (MIPS_ABI_LAST + 1 != sizeof (mips_abi_strings) / sizeof (mips_abi_strings[0])) - internal_error (__FILE__, __LINE__, "mips_abi_strings out of sync"); + internal_error (__FILE__, __LINE__, _("mips_abi_strings out of sync")); gdbarch_register (bfd_arch_mips, mips_gdbarch_init, mips_dump_tdep); @@ -6095,115 +5192,133 @@ _initialize_mips_tdep (void) /* Add root prefix command for all "set mips"/"show mips" commands */ add_prefix_cmd ("mips", no_class, set_mips_command, - "Various MIPS specific commands.", + _("Various MIPS specific commands."), &setmipscmdlist, "set mips ", 0, &setlist); add_prefix_cmd ("mips", no_class, show_mips_command, - "Various MIPS specific commands.", + _("Various MIPS specific commands."), &showmipscmdlist, "show mips ", 0, &showlist); /* Allow the user to override the saved register size. */ - add_show_from_set (add_set_enum_cmd ("saved-gpreg-size", - class_obscure, - size_enums, - &mips_abi_regsize_string, "\ -Set size of general purpose registers saved on the stack.\n\ + add_setshow_enum_cmd ("saved-gpreg-size", class_obscure, + size_enums, &mips_abi_regsize_string, _("\ +Set size of general purpose registers saved on the stack."), _("\ +Show size of general purpose registers saved on the stack."), _("\ This option can be set to one of:\n\ 32 - Force GDB to treat saved GP registers as 32-bit\n\ 64 - Force GDB to treat saved GP registers as 64-bit\n\ auto - Allow GDB to use the target's default setting or autodetect the\n\ - saved GP register size from information contained in the executable.\n\ - (default: auto)", &setmipscmdlist), &showmipscmdlist); + saved GP register size from information contained in the\n\ + executable (default)."), + NULL, + NULL, /* FIXME: i18n: Size of general purpose registers saved on the stack is %s. */ + &setmipscmdlist, &showmipscmdlist); /* Allow the user to override the argument stack size. */ - add_show_from_set (add_set_enum_cmd ("stack-arg-size", - class_obscure, - size_enums, - &mips_stack_argsize_string, "\ -Set the amount of stack space reserved for each argument.\n\ + add_setshow_enum_cmd ("stack-arg-size", class_obscure, + size_enums, &mips_stack_argsize_string, _("\ +Set the amount of stack space reserved for each argument."), _("\ +Show the amount of stack space reserved for each argument."), _("\ This option can be set to one of:\n\ 32 - Force GDB to allocate 32-bit chunks per argument\n\ 64 - Force GDB to allocate 64-bit chunks per argument\n\ auto - Allow GDB to determine the correct setting from the current\n\ - target and executable (default)", &setmipscmdlist), &showmipscmdlist); + target and executable (default)"), + NULL, + NULL, /* FIXME: i18n: The amount of stack space reserved for each argument is %s. */ + &setmipscmdlist, &showmipscmdlist); /* Allow the user to override the ABI. */ - c = add_set_enum_cmd - ("abi", class_obscure, mips_abi_strings, &mips_abi_string, - "Set the ABI used by this program.\n" - "This option can be set to one of:\n" - " auto - the default ABI associated with the current binary\n" - " o32\n" - " o64\n" " n32\n" " n64\n" " eabi32\n" " eabi64", &setmipscmdlist); - set_cmd_sfunc (c, mips_abi_update); - add_cmd ("abi", class_obscure, show_mips_abi, - "Show ABI in use by MIPS target", &showmipscmdlist); + add_setshow_enum_cmd ("abi", class_obscure, mips_abi_strings, + &mips_abi_string, _("\ +Set the MIPS ABI used by this program."), _("\ +Show the MIPS ABI used by this program."), _("\ +This option can be set to one of:\n\ + auto - the default ABI associated with the current binary\n\ + o32\n\ + o64\n\ + n32\n\ + n64\n\ + eabi32\n\ + eabi64"), + mips_abi_update, + show_mips_abi, + &setmipscmdlist, &showmipscmdlist); /* Let the user turn off floating point and set the fence post for heuristic_proc_start. */ add_prefix_cmd ("mipsfpu", class_support, set_mipsfpu_command, - "Set use of MIPS floating-point coprocessor.", + _("Set use of MIPS floating-point coprocessor."), &mipsfpulist, "set mipsfpu ", 0, &setlist); add_cmd ("single", class_support, set_mipsfpu_single_command, - "Select single-precision MIPS floating-point coprocessor.", + _("Select single-precision MIPS floating-point coprocessor."), &mipsfpulist); add_cmd ("double", class_support, set_mipsfpu_double_command, - "Select double-precision MIPS floating-point coprocessor.", + _("Select double-precision MIPS floating-point coprocessor."), &mipsfpulist); add_alias_cmd ("on", "double", class_support, 1, &mipsfpulist); add_alias_cmd ("yes", "double", class_support, 1, &mipsfpulist); add_alias_cmd ("1", "double", class_support, 1, &mipsfpulist); add_cmd ("none", class_support, set_mipsfpu_none_command, - "Select no MIPS floating-point coprocessor.", &mipsfpulist); + _("Select no MIPS floating-point coprocessor."), &mipsfpulist); add_alias_cmd ("off", "none", class_support, 1, &mipsfpulist); add_alias_cmd ("no", "none", class_support, 1, &mipsfpulist); add_alias_cmd ("0", "none", class_support, 1, &mipsfpulist); add_cmd ("auto", class_support, set_mipsfpu_auto_command, - "Select MIPS floating-point coprocessor automatically.", + _("Select MIPS floating-point coprocessor automatically."), &mipsfpulist); add_cmd ("mipsfpu", class_support, show_mipsfpu_command, - "Show current use of MIPS floating-point coprocessor target.", + _("Show current use of MIPS floating-point coprocessor target."), &showlist); /* We really would like to have both "0" and "unlimited" work, but command.c doesn't deal with that. So make it a var_zinteger because the user can always use "999999" or some such for unlimited. */ - c = add_set_cmd ("heuristic-fence-post", class_support, var_zinteger, - (char *) &heuristic_fence_post, "\ -Set the distance searched for the start of a function.\n\ + add_setshow_zinteger_cmd ("heuristic-fence-post", class_support, + &heuristic_fence_post, _("\ +Set the distance searched for the start of a function."), _("\ +Show the distance searched for the start of a function."), _("\ If you are debugging a stripped executable, GDB needs to search through the\n\ program for the start of a function. This command sets the distance of the\n\ -search. The only need to set it is when debugging a stripped executable.", &setlist); - /* We need to throw away the frame cache when we set this, since it - might change our ability to get backtraces. */ - set_cmd_sfunc (c, reinit_frame_cache_sfunc); - add_show_from_set (c, &showlist); +search. The only need to set it is when debugging a stripped executable."), + reinit_frame_cache_sfunc, + NULL, /* FIXME: i18n: The distance searched for the start of a function is %s. */ + &setlist, &showlist); /* Allow the user to control whether the upper bits of 64-bit addresses should be zeroed. */ - add_setshow_auto_boolean_cmd ("mask-address", no_class, &mask_address_var, "\ -Set zeroing of upper 32 bits of 64-bit addresses.\n\ + add_setshow_auto_boolean_cmd ("mask-address", no_class, + &mask_address_var, _("\ +Set zeroing of upper 32 bits of 64-bit addresses."), _("\ +Show zeroing of upper 32 bits of 64-bit addresses."), _("\ Use \"on\" to enable the masking, \"off\" to disable it and \"auto\" to \n\ -allow GDB to determine the correct value.\n", "\ -Show zeroing of upper 32 bits of 64-bit addresses.", - NULL, show_mask_address, &setmipscmdlist, &showmipscmdlist); +allow GDB to determine the correct value."), + NULL, show_mask_address, + &setmipscmdlist, &showmipscmdlist); /* Allow the user to control the size of 32 bit registers within the raw remote packet. */ - add_setshow_cmd ("remote-mips64-transfers-32bit-regs", class_obscure, - var_boolean, &mips64_transfers_32bit_regs_p, "\ -Set compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\ -Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\ -that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\ -64 bits for others. Use \"off\" to disable compatibility mode", "\ -Show compatibility with 64-bit MIPS targets that transfer 32-bit quantities.\n\ + add_setshow_boolean_cmd ("remote-mips64-transfers-32bit-regs", class_obscure, + &mips64_transfers_32bit_regs_p, _("\ +Set compatibility with 64-bit MIPS target that transfers 32-bit quantities."), + _("\ +Show compatibility with 64-bit MIPS target that transfers 32-bit quantities."), + _("\ Use \"on\" to enable backward compatibility with older MIPS 64 GDB+target\n\ that would transfer 32 bits for some registers (e.g. SR, FSR) and\n\ -64 bits for others. Use \"off\" to disable compatibility mode", set_mips64_transfers_32bit_regs, NULL, &setlist, &showlist); +64 bits for others. Use \"off\" to disable compatibility mode"), + set_mips64_transfers_32bit_regs, + NULL, /* FIXME: i18n: Compatibility with 64-bit MIPS target that transfers 32-bit quantities is %s. */ + &setlist, &showlist); /* Debug this files internals. */ - add_show_from_set (add_set_cmd ("mips", class_maintenance, var_zinteger, - &mips_debug, "Set mips debugging.\n\ -When non-zero, mips specific debugging is enabled.", &setdebuglist), &showdebuglist); + add_setshow_zinteger_cmd ("mips", class_maintenance, + &mips_debug, _("\ +Set mips debugging."), _("\ +Show mips debugging."), _("\ +When non-zero, mips specific debugging is enabled."), + NULL, + NULL, /* FIXME: i18n: Mips debugging is currently %s. */ + &setdebuglist, &showdebuglist); }