X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=gprof%2Fconfigure;h=0bfd99487794d92bc5ec5fae44e0db8f625e985a;hb=3c62831e20dc51f9d86aa471570e8451dd253bf6;hp=507771c5fe999e5b4b302089a35bf787428dc98c;hpb=cc4f98f55ef6c966815d31bc1c5aefe82b1bfe00;p=deliverable%2Fbinutils-gdb.git diff --git a/gprof/configure b/gprof/configure index 507771c5fe..0bfd994877 100755 --- a/gprof/configure +++ b/gprof/configure @@ -1,7 +1,7 @@ #! /bin/sh # Guess values for system-dependent variables and create Makefiles. -# Generated automatically using autoconf version 2.12.1 +# Generated automatically using autoconf version 2.13 # Copyright (C) 1992, 93, 94, 95, 96 Free Software Foundation, Inc. # # This configure script is free software; the Free Software Foundation @@ -12,15 +12,17 @@ ac_help= ac_default_prefix=/usr/local # Any additions from configure.in: ac_help="$ac_help - --enable-shared build shared libraries [default=yes] - --enable-shared=PKGS only build shared libraries if the current package - appears as an element in the PKGS list" + --enable-shared[=PKGS] build shared libraries [default=yes]" ac_help="$ac_help - --enable-static build static libraries [default=yes] - --enable-static=PKGS only build shared libraries if the current package - appears as an element in the PKGS list" + --enable-static[=PKGS] build static libraries [default=yes]" +ac_help="$ac_help + --enable-fast-install[=PKGS] optimize for fast installation [default=yes]" ac_help="$ac_help --with-gnu-ld assume the C compiler uses GNU ld [default=no]" +ac_help="$ac_help + --disable-libtool-lock avoid locking (might break parallel builds)" +ac_help="$ac_help + --with-pic try to use only PIC/non-PIC objects [default=use both]" ac_help="$ac_help --disable-nls do not use Native Language Support" ac_help="$ac_help @@ -28,6 +30,8 @@ ac_help="$ac_help ac_help="$ac_help --enable-maintainer-mode enable make rules and dependencies not useful (and sometimes confusing) to the casual installer" +ac_help="$ac_help + --enable-build-warnings Enable build-time compiler warnings if gcc is used" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -350,7 +354,7 @@ EOF verbose=yes ;; -version | --version | --versio | --versi | --vers) - echo "configure generated by autoconf version 2.12.1" + echo "configure generated by autoconf version 2.13" exit 0 ;; -with-* | --with-*) @@ -520,9 +524,11 @@ ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross +ac_exeext= +ac_objext=o if (echo "testing\c"; echo 1,2,3) | grep c >/dev/null; then # Stardent Vistra SVR4 grep lacks -e, says ghazi@caip.rutgers.edu. if (echo -n testing; echo 1,2,3) | sed s/-n/xn/ | grep xn >/dev/null; then @@ -535,6 +541,68 @@ else ac_n= ac_c='\c' ac_t= fi +echo $ac_n "checking for Cygwin environment""... $ac_c" 1>&6 +echo "configure:546: checking for Cygwin environment" >&5 +if eval "test \"`echo '$''{'ac_cv_cygwin'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_cygwin=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_cygwin=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_cygwin" 1>&6 +CYGWIN= +test "$ac_cv_cygwin" = yes && CYGWIN=yes +echo $ac_n "checking for mingw32 environment""... $ac_c" 1>&6 +echo "configure:579: checking for mingw32 environment" >&5 +if eval "test \"`echo '$''{'ac_cv_mingw32'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + ac_cv_mingw32=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_mingw32=no +fi +rm -f conftest* +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_mingw32" 1>&6 +MINGW32= +test "$ac_cv_mingw32" = yes && MINGW32=yes ac_aux_dir= @@ -584,7 +652,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:588: checking host system type" >&5 +echo "configure:656: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -605,7 +673,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking target system type""... $ac_c" 1>&6 -echo "configure:609: checking target system type" >&5 +echo "configure:677: checking target system type" >&5 target_alias=$target case "$target_alias" in @@ -623,7 +691,7 @@ target_os=`echo $target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$target" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:627: checking build system type" >&5 +echo "configure:695: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -646,6 +714,50 @@ test "$host_alias" != "$target_alias" && program_prefix=${target_alias}- + echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6 +echo "configure:719: checking for strerror in -lcposix" >&5 +ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'` +if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + ac_save_LIBS="$LIBS" +LIBS="-lcposix $LIBS" +cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=yes" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_lib_$ac_lib_var=no" +fi +rm -f conftest* +LIBS="$ac_save_LIBS" + +fi +if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then + echo "$ac_t""yes" 1>&6 + LIBS="$LIBS -lcposix" +else + echo "$ac_t""no" 1>&6 +fi + + + + +BFD_VERSION=`sed -n -e 's/^.._INIT_AUTOMAKE.*,[ ]*\([^ ]*\)[ ]*).*/\1/p' < ${srcdir}/../bfd/configure.in` # Find a good install program. We prefer a C program (faster), # so one script is as good as another. But avoid the broken or # incompatible versions: @@ -658,12 +770,12 @@ test "$host_alias" != "$target_alias" && # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:662: checking for a BSD compatible install" >&5 +echo "configure:774: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" for ac_dir in $PATH; do # Account for people who put trailing slashes in PATH elements. case "$ac_dir/" in @@ -706,13 +818,12 @@ echo "$ac_t""$INSTALL" 1>&6 # It thinks the first close brace ends the variable substitution. test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' - - test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:716: checking whether build environment is sane" >&5 +echo "configure:827: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -769,7 +880,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:773: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:884: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -798,7 +909,7 @@ fi PACKAGE=gprof -VERSION=2.9.4 +VERSION=${BFD_VERSION} if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then { echo "configure: error: source directory already configured; run "make distclean" there first" 1>&2; exit 1; } @@ -815,7 +926,7 @@ EOF missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:819: checking for working aclocal" >&5 +echo "configure:930: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -828,7 +939,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:832: checking for working autoconf" >&5 +echo "configure:943: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -841,7 +952,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:845: checking for working automake" >&5 +echo "configure:956: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -854,7 +965,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:858: checking for working autoheader" >&5 +echo "configure:969: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -867,7 +978,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:871: checking for working makeinfo" >&5 +echo "configure:982: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -885,7 +996,7 @@ fi if test "${enable_shared+set}" = set; then enableval="$enable_shared" p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) @@ -908,7 +1019,7 @@ fi if test "${enable_static+set}" = set; then enableval="$enable_static" p=${PACKAGE-default} -case "$enableval" in +case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) @@ -927,47 +1038,42 @@ else enable_static=yes fi -# Extract the first word of "ranlib", so it can be a program name with args. -set dummy ranlib; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:934: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$RANLIB"; then - ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_RANLIB="ranlib" - break +# Check whether --enable-fast-install or --disable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval="$enable_fast_install" + p=${PACKAGE-default} +case $enableval in +yes) enable_fast_install=yes ;; +no) enable_fast_install=no ;; +*) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," + for pkg in $enableval; do + if test "X$pkg" = "X$p"; then + enable_fast_install=yes fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" -fi -fi -RANLIB="$ac_cv_prog_RANLIB" -if test -n "$RANLIB"; then - echo "$ac_t""$RANLIB" 1>&6 + ;; +esac else - echo "$ac_t""no" 1>&6 + enable_fast_install=yes fi # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:963: checking for $ac_word" >&5 +echo "configure:1068: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -988,16 +1094,17 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:992: checking for $ac_word" >&5 +echo "configure:1098: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1032,25 +1139,61 @@ else echo "$ac_t""no" 1>&6 fi + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1149: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1040: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1181: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext < conftest.$ac_ext << EOF + +#line 1192 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1054: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:1197: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1064,18 +1207,24 @@ else ac_cv_prog_cc_works=no fi rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1074: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1223: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1079: checking whether we are using GNU C" >&5 +echo "configure:1228: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1084,7 +1233,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1088: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1237: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1095,11 +1244,15 @@ echo "$ac_t""$ac_cv_prog_gcc" 1>&6 if test $ac_cv_prog_gcc = yes; then GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1103: checking whether ${CC-cc} accepts -g" >&5 +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:1256: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1114,16 +1267,20 @@ rm -f conftest* fi echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then CFLAGS="-g -O2" else - CFLAGS="-O2" + CFLAGS="-g" fi else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi fi # Check whether --with-gnu-ld or --without-gnu-ld was given. @@ -1134,18 +1291,29 @@ else with_gnu_ld=no fi - ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then +if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:1143: checking for ld used by GCC" >&5 - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. - /* | [A-Za-z]:\\*) - test -z "$LD" && LD="$ac_prog" - ;; +echo "configure:1299: checking for ld used by GCC" >&5 + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | [A-Za-z]:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld @@ -1157,96 +1325,112 @@ echo "configure:1143: checking for ld used by GCC" >&5 esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:1161: checking for GNU ld" >&5 +echo "configure:1329: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:1164: checking for non-GNU ld" >&5 +echo "configure:1332: checking for non-GNU ld" >&5 fi -if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then +if eval "test \"`echo '$''{'lt_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" for ac_dir in $PATH; do test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog"; then - ac_cv_path_LD="$ac_dir/$ac_prog" + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some GNU ld's only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then test "$with_gnu_ld" != no && break else - test "$with_gnu_ld" != yes && break + test "$with_gnu_ld" != yes && break fi fi done IFS="$ac_save_ifs" else - ac_cv_path_LD="$LD" # Let the user override the test with a path. + lt_cv_path_LD="$LD" # Let the user override the test with a path. fi fi -LD="$ac_cv_path_LD" +LD="$lt_cv_path_LD" if test -n "$LD"; then echo "$ac_t""$LD" 1>&6 else echo "$ac_t""no" 1>&6 fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } - echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:1200: checking if the linker ($LD) is GNU ld" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then +echo "configure:1367: checking if the linker ($LD) is GNU ld" >&5 +if eval "test \"`echo '$''{'lt_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else # I'd rather use --version here, but apparently some GNU ld's only accept -v. if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes + lt_cv_prog_gnu_ld=yes else - ac_cv_prog_gnu_ld=no + lt_cv_prog_gnu_ld=no fi fi -echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 +echo "$ac_t""$lt_cv_prog_gnu_ld" 1>&6 +with_gnu_ld=$lt_cv_prog_gnu_ld +echo $ac_n "checking for $LD option to reload object files""... $ac_c" 1>&6 +echo "configure:1384: checking for $LD option to reload object files" >&5 +if eval "test \"`echo '$''{'lt_cv_ld_reload_flag'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + lt_cv_ld_reload_flag='-r' +fi + +echo "$ac_t""$lt_cv_ld_reload_flag" 1>&6 +reload_flag=$lt_cv_ld_reload_flag +test -n "$reload_flag" && reload_flag=" $reload_flag" + echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:1216: checking for BSD-compatible nm" >&5 -if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then +echo "configure:1396: checking for BSD-compatible nm" >&5 +if eval "test \"`echo '$''{'lt_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -z "$NM"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in /usr/ucb /usr/ccs/bin $PATH /bin; do + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm; then + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + lt_cv_path_NM="$tmp_nm -B" + break + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" + break else - ac_cv_path_NM="$ac_dir/nm" + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags fi - break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -else - ac_cv_path_NM="$NM" # Let the user override the test with a path. + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi fi -NM="$ac_cv_path_NM" +NM="$lt_cv_path_NM" echo "$ac_t""$NM" 1>&6 - echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1250: checking whether ln -s works" >&5 +echo "configure:1434: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1266,194 +1450,696 @@ else echo "$ac_t""no" 1>&6 fi -if test $host != $build; then - ac_tool_prefix=${host_alias}- +echo $ac_n "checking how to recognise dependant libraries""... $ac_c" 1>&6 +echo "configure:1455: checking how to recognise dependant libraries" >&5 +if eval "test \"`echo '$''{'lt_cv_deplibs_check_method'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 else - ac_tool_prefix= -fi + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [regex]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix*) + lt_cv_deplibs_check_method=pass_all + ;; -# Always use our own libtool. -LIBTOOL='$(SHELL) $(top_builddir)/libtool' +beos*) + lt_cv_deplibs_check_method=pass_all + ;; -# Check for any special flags to pass to ltconfig. -libtool_flags= -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$silent" = yes && libtool_flags="$libtool_flags --silent" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" +bsdi4*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; -# Some flags need to be propagated to the compiler or linker for good -# libtool support. -case "$host" in -*-*-irix6*) - # Find out which ABI we are using. - echo '#line 1292 "configure"' > conftest.$ac_ext - if { (eval echo configure:1293: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - case "`/usr/bin/file conftest.o`" in - *32-bit*) - LD="${LD-ld} -32" - ;; - *N32*) - LD="${LD-ld} -n32" - ;; - *64-bit*) - LD="${LD-ld} -64" +cygwin* | mingw* |pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.012) + lt_cv_file_magic_test_file='/System/Library/Frameworks/System.framework/System' + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + +freebsd* ) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac + else + lt_cv_deplibs_check_method=pass_all fi - rm -rf conftest* ;; -*-*-sco3.2v5*) - # On SCO OpenServer 5, we need -belf to get full-featured binaries. - CFLAGS="$CFLAGS -belf" +gnu*) + lt_cv_deplibs_check_method=pass_all ;; -*-*-cygwin32*) - # Extract the first word of "${ac_tool_prefix}dlltool", so it can be a program name with args. -set dummy ${ac_tool_prefix}dlltool; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1318: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_DLLTOOL="${ac_tool_prefix}dlltool" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -DLLTOOL="$ac_cv_prog_DLLTOOL" -if test -n "$DLLTOOL"; then - echo "$ac_t""$DLLTOOL" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi +hpux10.20*|hpux11*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; +irix5* | irix6*) + case $host_os in + irix5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; -if test -z "$ac_cv_prog_DLLTOOL"; then -if test -n "$ac_tool_prefix"; then - # Extract the first word of "dlltool", so it can be a program name with args. -set dummy dlltool; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1349: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$DLLTOOL"; then - ac_cv_prog_DLLTOOL="$DLLTOOL" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_DLLTOOL="dlltool" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_prog_DLLTOOL" && ac_cv_prog_DLLTOOL="false" -fi -fi -DLLTOOL="$ac_cv_prog_DLLTOOL" -if test -n "$DLLTOOL"; then - echo "$ac_t""$DLLTOOL" 1>&6 +# This must be Linux ELF. +linux-gnu*) + case $host_cpu in + alpha* | hppa* | i*86 | powerpc* | sparc* | ia64* ) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' + fi + ;; + +newsos6) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv5uw[78]* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + esac + ;; +esac + +fi + +echo "$ac_t""$lt_cv_deplibs_check_method" 1>&6 +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method + +echo $ac_n "checking for object suffix""... $ac_c" 1>&6 +echo "configure:1619: checking for object suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_objext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + rm -f conftest* +echo 'int i = 1;' > conftest.$ac_ext +if { (eval echo configure:1625: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + for ac_file in conftest.*; do + case $ac_file in + *.c) ;; + *) ac_cv_objext=`echo $ac_file | sed -e s/conftest.//` ;; + esac + done +else + { echo "configure: error: installation or configuration problem; compiler does not work" 1>&2; exit 1; } +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_objext" 1>&6 +OBJEXT=$ac_cv_objext +ac_objext=$ac_cv_objext + + + +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:1645: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:1655: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done + else + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } + fi + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +fi +fi + +EXEEXT="" +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT + +if test $host != $build; then + ac_tool_prefix=${host_alias}- +else + ac_tool_prefix= +fi + +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + echo $ac_n "checking for ${ac_tool_prefix}file""... $ac_c" 1>&6 +echo "configure:1688: checking for ${ac_tool_prefix}file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + echo $ac_n "checking for file""... $ac_c" 1>&6 +echo "configure:1750: checking for file" >&5 +if eval "test \"`echo '$''{'lt_cv_path_MAGIC_CMD'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + case $MAGIC_CMD in + /*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; + ?:/*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. + ;; + *) + ac_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="/usr/bin:$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$ac_save_ifs" + MAGIC_CMD="$ac_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + echo "$ac_t""$MAGIC_CMD" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1821: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 else echo "$ac_t""no" 1>&6 fi + +if test -z "$ac_cv_prog_RANLIB"; then +if test -n "$ac_tool_prefix"; then + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:1853: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 else - DLLTOOL="false" + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" fi fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi -# Extract the first word of "${ac_tool_prefix}as", so it can be a program name with args. -set dummy ${ac_tool_prefix}as; ac_word=$2 +else + RANLIB=":" +fi +fi + +# Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1383: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then +echo "configure:1888: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_AS="${ac_tool_prefix}as" + ac_cv_prog_STRIP="${ac_tool_prefix}strip" break fi done IFS="$ac_save_ifs" fi fi -AS="$ac_cv_prog_AS" -if test -n "$AS"; then - echo "$ac_t""$AS" 1>&6 +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi -if test -z "$ac_cv_prog_AS"; then +if test -z "$ac_cv_prog_STRIP"; then if test -n "$ac_tool_prefix"; then - # Extract the first word of "as", so it can be a program name with args. -set dummy as; ac_word=$2 + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1414: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then +echo "configure:1920: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - if test -n "$AS"; then - ac_cv_prog_AS="$AS" # Let the user override the test. + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then - ac_cv_prog_AS="as" + ac_cv_prog_STRIP="strip" break fi done IFS="$ac_save_ifs" - test -z "$ac_cv_prog_AS" && ac_cv_prog_AS="false" + test -z "$ac_cv_prog_STRIP" && ac_cv_prog_STRIP=":" fi fi -AS="$ac_cv_prog_AS" -if test -n "$AS"; then - echo "$ac_t""$AS" 1>&6 +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 else echo "$ac_t""no" 1>&6 fi else - AS="false" + STRIP=":" fi fi +# Check for any special flags to pass to ltconfig. +libtool_flags="--cache-file=$cache_file" +test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" +test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" +test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" +test "$GCC" = yes && libtool_flags="$libtool_flags --with-gcc" +test "$lt_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" + + +# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval="$enable_libtool_lock" + : +fi + +test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" +test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" + +# Check whether --with-pic or --without-pic was given. +if test "${with_pic+set}" = set; then + withval="$with_pic" + pic_mode="$withval" +else + pic_mode=default +fi + +test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic" +test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic" + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 1987 "configure"' > conftest.$ac_ext + if { (eval echo configure:1988: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 +echo "configure:2009: checking whether the C compiler needs -belf" >&5 +if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + + ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + + cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + lt_cv_cc_needs_belf=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + lt_cv_cc_needs_belf=no +fi +rm -f conftest* + ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +fi + +echo "$ac_t""$lt_cv_cc_needs_belf" 1>&6 + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi ;; + esac + +# Save cache, so that ltconfig can load it +cat > confcache <<\EOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs. It is not useful on other systems. +# If it contains results you don't want to keep, you may remove or edit it. +# +# By default, configure uses ./config.cache as the cache file, +# creating it if it does not exist already. You can give configure +# the --cache-file=FILE option to use a different cache file; that is +# what configure does when it calls configure scripts in +# subdirectories, so they share the cache. +# Giving --cache-file=/dev/null disables caching, for debugging configure. +# config.status only pays attention to the cache file if you give it the +# --recheck option to rerun configure. +# +EOF +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, don't put newlines in cache variables' values. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +(set) 2>&1 | + case `(ac_space=' '; set | grep ac_space) 2>&1` in + *ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote substitution + # turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + -e "s/'/'\\\\''/g" \ + -e "s/^\\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\\)=\\(.*\\)/\\1=\${\\1='\\2'}/p" + ;; + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n -e 's/^\([a-zA-Z0-9_]*_cv_[a-zA-Z0-9_]*\)=\(.*\)/\1=${\1=\2}/p' + ;; + esac >> confcache +if cmp -s $cache_file confcache; then + : +else + if test -w $cache_file; then + echo "updating cache $cache_file" + cat confcache > $cache_file + else + echo "not updating unwritable cache $cache_file" + fi +fi +rm -f confcache + + # Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \ -DLLTOOL="$DLLTOOL" AS="$AS" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ +AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ +MAGIC_CMD="$MAGIC_CMD" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ +LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \ +AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \ +objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \ +deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \ +${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ +$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \ || { echo "configure: error: libtool configure failed" 1>&2; exit 1; } +# Reload cache, that may have been modified by ltconfig +if test -r "$cache_file"; then + echo "loading cache $cache_file" + . $cache_file +else + echo "creating cache $cache_file" + > $cache_file +fi + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +# Redirect the config.log output again, so that the ltconfig log is not +# clobbered by the next message. +exec 5>>./config.log + + + + + + @@ -1462,15 +2148,16 @@ $libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1466: checking for $ac_word" >&5 +echo "configure:2152: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_prog_CC="gcc" @@ -1491,16 +2178,17 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1495: checking for $ac_word" >&5 +echo "configure:2182: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else if test -n "$CC"; then ac_cv_prog_CC="$CC" # Let the user override the test. else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" ac_prog_rejected=no - for ac_dir in $PATH; do + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then if test "$ac_dir/$ac_word" = "/usr/ucb/cc"; then @@ -1535,25 +2223,61 @@ else echo "$ac_t""no" 1>&6 fi + if test -z "$CC"; then + case "`uname -s`" in + *win32* | *WIN32*) + # Extract the first word of "cl", so it can be a program name with args. +set dummy cl; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2233: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_CC="cl" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +CC="$ac_cv_prog_CC" +if test -n "$CC"; then + echo "$ac_t""$CC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + ;; + esac + fi test -z "$CC" && { echo "configure: error: no acceptable cc found in \$PATH" 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1543: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:2265: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. ac_cpp='$CPP $CPPFLAGS' ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' -ac_link='${CC-cc} -o conftest $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' cross_compiling=$ac_cv_prog_cc_cross -cat > conftest.$ac_ext < conftest.$ac_ext << EOF + +#line 2276 "configure" #include "confdefs.h" + main(){return(0);} EOF -if { (eval echo configure:1557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2281: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1561,103 +2285,212 @@ if { (eval echo configure:1557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && t else ac_cv_prog_cc_cross=yes fi -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - ac_cv_prog_cc_works=no +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + ac_cv_prog_cc_works=no +fi +rm -fr conftest* +ac_ext=c +# CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. +ac_cpp='$CPP $CPPFLAGS' +ac_compile='${CC-cc} -c $CFLAGS $CPPFLAGS conftest.$ac_ext 1>&5' +ac_link='${CC-cc} -o conftest${ac_exeext} $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS 1>&5' +cross_compiling=$ac_cv_prog_cc_cross + +echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 +if test $ac_cv_prog_cc_works = no; then + { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } +fi +echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 +echo "configure:2307: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 +cross_compiling=$ac_cv_prog_cc_cross + +echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 +echo "configure:2312: checking whether we are using GNU C" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then + ac_cv_prog_gcc=yes +else + ac_cv_prog_gcc=no +fi +fi + +echo "$ac_t""$ac_cv_prog_gcc" 1>&6 + +if test $ac_cv_prog_gcc = yes; then + GCC=yes +else + GCC= +fi + +ac_test_CFLAGS="${CFLAGS+set}" +ac_save_CFLAGS="$CFLAGS" +CFLAGS= +echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 +echo "configure:2340: checking whether ${CC-cc} accepts -g" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + echo 'void f(){}' > conftest.c +if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then + ac_cv_prog_cc_g=yes +else + ac_cv_prog_cc_g=no +fi +rm -f conftest* + +fi + +echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 +if test "$ac_test_CFLAGS" = set; then + CFLAGS="$ac_save_CFLAGS" +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# ./install, which can be erroneously created by make from ./install.sh. +echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 +echo "configure:2383: checking for a BSD compatible install" >&5 +if test -z "$INSTALL"; then +if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + IFS="${IFS= }"; ac_save_IFS="$IFS"; IFS=":" + for ac_dir in $PATH; do + # Account for people who put trailing slashes in PATH elements. + case "$ac_dir/" in + /|./|.//|/etc/*|/usr/sbin/*|/usr/etc/*|/sbin/*|/usr/afsws/bin/*|/usr/ucb/*) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + if test -f $ac_dir/$ac_prog; then + if test $ac_prog = install && + grep dspmsg $ac_dir/$ac_prog >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + else + ac_cv_path_install="$ac_dir/$ac_prog -c" + break 2 + fi + fi + done + ;; + esac + done + IFS="$ac_save_IFS" + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL="$ac_cv_path_install" + else + # As a last resort, use the slow shell script. We don't cache a + # path for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the path is relative. + INSTALL="$ac_install_sh" + fi fi -rm -fr conftest* +echo "$ac_t""$INSTALL" 1>&6 -echo "$ac_t""$ac_cv_prog_cc_works" 1>&6 -if test $ac_cv_prog_cc_works = no; then - { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } -fi -echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1577: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 -echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 -cross_compiling=$ac_cv_prog_cc_cross +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' -echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1582: checking whether we are using GNU C" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.c <&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then - ac_cv_prog_gcc=yes -else - ac_cv_prog_gcc=no -fi -fi +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' -echo "$ac_t""$ac_cv_prog_gcc" 1>&6 +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' -if test $ac_cv_prog_gcc = yes; then - GCC=yes - ac_test_CFLAGS="${CFLAGS+set}" - ac_save_CFLAGS="$CFLAGS" - CFLAGS= - echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1606: checking whether ${CC-cc} accepts -g" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then + +for ac_func in setmode +do +echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 +echo "configure:2439: checking for $ac_func" >&5 +if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - echo 'void f(){}' > conftest.c -if test -z "`${CC-cc} -g -c conftest.c 2>&1`"; then - ac_cv_prog_cc_g=yes -else - ac_cv_prog_cc_g=no -fi -rm -f conftest* + cat > conftest.$ac_ext < +/* Override any gcc2 internal prototype to avoid an error. */ +/* We use char because int might match the return type of a gcc2 + builtin and then its argument prototype would still apply. */ +char $ac_func(); -fi +int main() { -echo "$ac_t""$ac_cv_prog_cc_g" 1>&6 - if test "$ac_test_CFLAGS" = set; then - CFLAGS="$ac_save_CFLAGS" - elif test $ac_cv_prog_cc_g = yes; then - CFLAGS="-g -O2" - else - CFLAGS="-O2" - fi +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined (__stub_$ac_func) || defined (__stub___$ac_func) +choke me +#else +$ac_func(); +#endif + +; return 0; } +EOF +if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + eval "ac_cv_func_$ac_func=yes" else - GCC= - test "${CFLAGS+set}" = set || CFLAGS="-g" + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_func_$ac_func=no" +fi +rm -f conftest* fi - -test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' - - -echo $ac_n "checking for POSIXized ISC""... $ac_c" 1>&6 -echo "configure:1638: checking for POSIXized ISC" >&5 -if test -d /etc/conf/kconfig.d && - grep _POSIX_VERSION /usr/include/sys/unistd.h >/dev/null 2>&1 -then +if eval "test \"`echo '$ac_cv_func_'$ac_func`\" = yes"; then echo "$ac_t""yes" 1>&6 - ISC=yes # If later tests want to check for ISC. - cat >> confdefs.h <<\EOF -#define _POSIX_SOURCE 1 + ac_tr_func=HAVE_`echo $ac_func | tr 'abcdefghijklmnopqrstuvwxyz' 'ABCDEFGHIJKLMNOPQRSTUVWXYZ'` + cat >> confdefs.h <&6 - ISC= fi +done -ALL_LINGUAS= +ALL_LINGUAS="fr" echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1661: checking how to run the C preprocessor" >&5 +echo "configure:2494: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1672,14 +2505,14 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1682: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2515: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else @@ -1689,14 +2522,31 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext < +Syntax Error +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:2532: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + : +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + CPP="${CC-cc} -nologo -E" + cat > conftest.$ac_ext < Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1699: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2549: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : else @@ -1708,6 +2558,8 @@ else fi rm -f conftest* fi +rm -f conftest* +fi rm -f conftest* ac_cv_prog_CPP="$CPP" fi @@ -1717,13 +2569,43 @@ else fi echo "$ac_t""$CPP" 1>&6 +# Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:2576: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RANLIB="ranlib" + break + fi + done + IFS="$ac_save_ifs" + test -z "$ac_cv_prog_RANLIB" && ac_cv_prog_RANLIB=":" +fi +fi +RANLIB="$ac_cv_prog_RANLIB" +if test -n "$RANLIB"; then + echo "$ac_t""$RANLIB" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1722: checking for ANSI C header files" >&5 +echo "configure:2604: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #include @@ -1731,8 +2613,8 @@ else #include EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1735: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:2617: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* ac_cv_header_stdc=yes @@ -1748,7 +2630,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -1766,7 +2648,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext < EOF @@ -1787,7 +2669,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext < #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -1798,7 +2680,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:1802: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2684: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -1822,12 +2704,12 @@ EOF fi echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:1826: checking for working const" >&5 +echo "configure:2708: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2762: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -1897,21 +2779,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:1901: checking for inline" >&5 +echo "configure:2783: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2797: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -1937,12 +2819,12 @@ EOF esac echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:1941: checking for off_t" >&5 +echo "configure:2823: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1951,7 +2833,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])off_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_off_t=yes else @@ -1970,12 +2852,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:1974: checking for size_t" >&5 +echo "configure:2856: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < #if STDC_HEADERS @@ -1984,7 +2866,7 @@ else #endif EOF if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | - egrep "size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then + egrep "(^|[^a-zA-Z_0-9])size_t[^a-zA-Z_0-9]" >/dev/null 2>&1; then rm -rf conftest* ac_cv_type_size_t=yes else @@ -2005,19 +2887,19 @@ fi # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:2009: checking for working alloca.h" >&5 +echo "configure:2891: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:2021: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2903: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -2038,25 +2920,30 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:2042: checking for alloca" >&5 +echo "configure:2924: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < +# ifdef _MSC_VER +# include +# define alloca _alloca # else -# ifdef _AIX - #pragma alloca +# if HAVE_ALLOCA_H +# include # else -# ifndef alloca /* predefined by HP cc +Olibcalls */ +# ifdef _AIX + #pragma alloca +# else +# ifndef alloca /* predefined by HP cc +Olibcalls */ char *alloca (); +# endif # endif # endif # endif @@ -2066,7 +2953,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:2070: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:2957: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -2091,19 +2978,19 @@ if test $ac_cv_func_alloca_works = no; then # that cause trouble. Some versions do not even contain alloca or # contain a buggy version. If you still want to use their alloca, # use ar to extract alloca.o from them instead of compiling alloca.c. - ALLOCA=alloca.o + ALLOCA=alloca.${ac_objext} cat >> confdefs.h <<\EOF #define C_ALLOCA 1 EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:2102: checking whether alloca needs Cray hooks" >&5 +echo "configure:2989: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2132: checking for $ac_func" >&5 +echo "configure:3019: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3047: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2183,7 +3070,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:2187: checking stack direction for C alloca" >&5 +echo "configure:3074: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2191,7 +3078,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3101: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -2231,22 +3118,22 @@ EOF fi -for ac_hdr in unistd.h +for ac_hdr in stdlib.h unistd.h sys/stat.h sys/types.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2239: checking for $ac_hdr" >&5 +echo "configure:3126: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2249: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:3136: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2274,12 +3161,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2278: checking for $ac_func" >&5 +echo "configure:3165: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3193: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2327,7 +3214,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:2331: checking for working mmap" >&5 +echo "configure:3218: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2335,7 +3222,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext < #include +#if HAVE_SYS_TYPES_H +# include +#endif + +#if HAVE_STDLIB_H +# include +#endif + +#if HAVE_SYS_STAT_H +# include +#endif + +#if HAVE_UNISTD_H +# include +#endif + /* This mess was copied from the GNU getpagesize.h. */ #ifndef HAVE_GETPAGESIZE -# ifdef HAVE_UNISTD_H -# include -# endif /* Assume that all systems that can run configure have sys/param.h. */ # ifndef HAVE_SYS_PARAM_H @@ -2475,7 +3375,7 @@ main() } EOF -if { (eval echo configure:2479: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3379: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -2503,18 +3403,18 @@ unistd.h values.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2507: checking for $ac_hdr" >&5 +echo "configure:3407: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2517: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:3417: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2543,12 +3443,12 @@ done __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2547: checking for $ac_func" >&5 +echo "configure:3447: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3475: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2600,12 +3500,12 @@ done for ac_func in stpcpy do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2604: checking for $ac_func" >&5 +echo "configure:3504: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3532: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2662,19 +3562,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:2666: checking for LC_MESSAGES" >&5 +echo "configure:3566: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:2678: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3578: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -2695,7 +3595,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:2699: checking whether NLS is requested" >&5 +echo "configure:3599: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -2715,7 +3615,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:2719: checking whether included gettext is requested" >&5 +echo "configure:3619: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -2734,18 +3634,18 @@ fi ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:2738: checking for libintl.h" >&5 +echo "configure:3638: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2748: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:3648: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -2761,19 +3661,19 @@ fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:2765: checking for gettext in libc" >&5 +echo "configure:3665: checking for gettext in libc" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < int main() { return (int) gettext ("") ; return 0; } EOF -if { (eval echo configure:2777: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3677: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libc=yes else @@ -2789,7 +3689,7 @@ echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 if test "$gt_cv_func_gettext_libc" != "yes"; then echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:2793: checking for bindtextdomain in -lintl" >&5 +echo "configure:3693: checking for bindtextdomain in -lintl" >&5 ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -2797,7 +3697,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lintl $LIBS" cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -2824,19 +3724,19 @@ fi if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then echo "$ac_t""yes" 1>&6 echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:2828: checking for gettext in libintl" >&5 +echo "configure:3728: checking for gettext in libintl" >&5 if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3740: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* gt_cv_func_gettext_libintl=yes else @@ -2864,7 +3764,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2868: checking for $ac_word" >&5 +echo "configure:3768: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2898,12 +3798,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2902: checking for $ac_func" >&5 +echo "configure:3802: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3830: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2953,7 +3853,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2957: checking for $ac_word" >&5 +echo "configure:3857: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2965,8 +3865,9 @@ else ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -2988,7 +3889,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2992: checking for $ac_word" >&5 +echo "configure:3893: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3020,7 +3921,7 @@ else fi cat > conftest.$ac_ext <&5; (eval $ac_link) 2>&5; } && test -s conftest; then +if { (eval echo configure:3933: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* CATOBJEXT=.gmo DATADIRNAME=share @@ -3060,7 +3961,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3064: checking for $ac_word" >&5 +echo "configure:3965: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3094,7 +3995,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3098: checking for $ac_word" >&5 +echo "configure:3999: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3106,8 +4007,9 @@ else ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. ;; *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$ac_word; then ac_cv_path_GMSGFMT="$ac_dir/$ac_word" @@ -3129,7 +4031,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3133: checking for $ac_word" >&5 +echo "configure:4035: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3219,7 +4121,7 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:3223: checking for catalogs to be installed" >&5 +echo "configure:4125: checking for catalogs to be installed" >&5 NEW_LINGUAS= for lang in ${LINGUAS=$ALL_LINGUAS}; do case "$ALL_LINGUAS" in @@ -3247,18 +4149,18 @@ echo "configure:3223: checking for catalogs to be installed" >&5 if test "$CATOBJEXT" = ".cat"; then ac_safe=`echo "linux/version.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for linux/version.h""... $ac_c" 1>&6 -echo "configure:3251: checking for linux/version.h" >&5 +echo "configure:4153: checking for linux/version.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3261: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } -ac_err=`grep -v '^ *+' conftest.out` +{ (eval echo configure:4163: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* eval "ac_cv_header_$ac_safe=yes" @@ -3302,7 +4204,7 @@ fi l= - if test -d $srcdir/po; then + if test -f $srcdir/po/POTFILES.in; then test -d po || mkdir po if test "x$srcdir" != "x."; then if test "x`echo $srcdir | sed 's@/.*@@'`" = "x"; then @@ -3319,17 +4221,8 @@ fi fi -case "${target}" in -*-*-bsd4.4* | *-*-netbsd* | *-*-freebsd* | *-*-openbsd*) - cat >> confdefs.h <<\EOF -#define BSD44_FORMAT 1 -EOF - - ;; -esac - echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:3333: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:4226: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -3339,103 +4232,162 @@ else fi echo "$ac_t""$USE_MAINTAINER_MODE" 1>&6 - if test $USE_MAINTAINER_MODE = yes; then - MAINT= + + +if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + MAINT=$MAINTAINER_MODE_TRUE + + + + +echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 +echo "configure:4251: checking for executable suffix" >&5 +if eval "test \"`echo '$''{'ac_cv_exeext'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test "$CYGWIN" = yes || test "$MINGW32" = yes; then + ac_cv_exeext=.exe +else + rm -f conftest* + echo 'int main () { return 0; }' > conftest.$ac_ext + ac_cv_exeext= + if { (eval echo configure:4261: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; }; then + for file in conftest.*; do + case $file in + *.c | *.o | *.obj) ;; + *) ac_cv_exeext=`echo $file | sed -e s/conftest//` ;; + esac + done else - MAINT='#M#' + { echo "configure: error: installation or configuration problem: compiler cannot create executables." 1>&2; exit 1; } fi - + rm -f conftest* + test x"${ac_cv_exeext}" = x && ac_cv_exeext=no +fi +fi -echo $ac_n "checking for Cygwin32 environment""... $ac_c" 1>&6 -echo "configure:3351: checking for Cygwin32 environment" >&5 -if eval "test \"`echo '$''{'am_cv_cygwin32'+set}'`\" = set"; then +EXEEXT="" +test x"${ac_cv_exeext}" != xno && EXEEXT=${ac_cv_exeext} +echo "$ac_t""${ac_cv_exeext}" 1>&6 +ac_exeext=$EXEEXT + + +for ac_hdr in sys/gmon_out.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:4286: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext < EOF -if { (eval echo configure:3363: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:4296: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then rm -rf conftest* - am_cv_cygwin32=yes + eval "ac_cv_header_$ac_safe=yes" else + echo "$ac_err" >&5 echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* - am_cv_cygwin32=no + eval "ac_cv_header_$ac_safe=no" fi rm -f conftest* -rm -f conftest* fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <&6 +fi +done -echo "$ac_t""$am_cv_cygwin32" 1>&6 -CYGWIN32= -test "$am_cv_cygwin32" = yes && CYGWIN32=yes -echo $ac_n "checking for Mingw32 environment""... $ac_c" 1>&6 -echo "configure:3380: checking for Mingw32 environment" >&5 -if eval "test \"`echo '$''{'am_cv_mingw32'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 + +echo $ac_n "checking the size of gmon pointers""... $ac_c" 1>&6 +echo "configure:4324: checking the size of gmon pointers" >&5 +if test "$cross_compiling" = yes; then + gmon_ptr_size=4 else cat > conftest.$ac_ext < +#include +#if HAVE_SYS_GMON_OUT_H +#include +#endif +main() +{ +#if HAVE_SYS_GMON_OUT_H + struct gmon_cg_arc_record arc; + FILE *f=fopen("conftestval", "w"); + if (!f) exit(1); + fprintf(f, "%d\n", sizeof(arc.from_pc)); + exit(0); +#else + FILE *f=fopen("conftestval", "w"); + if (!f) exit(1); + fprintf(f, "%d\n", (int) sizeof(char *)); + exit(1); +#endif +} EOF -if { (eval echo configure:3392: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then - rm -rf conftest* - am_cv_mingw32=yes +if { (eval echo configure:4352: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +then + gmon_ptr_size=`cat conftestval` else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 - rm -rf conftest* - am_cv_mingw32=no + rm -fr conftest* + gmon_ptr_size=4 fi -rm -f conftest* -rm -f conftest* +rm -fr conftest* fi -echo "$ac_t""$am_cv_mingw32" 1>&6 -MINGW32= -test "$am_cv_mingw32" = yes && MINGW32=yes - +echo "$ac_t""$gmon_ptr_size" 1>&6 -echo $ac_n "checking for executable suffix""... $ac_c" 1>&6 -echo "configure:3411: checking for executable suffix" >&5 -if eval "test \"`echo '$''{'am_cv_exeext'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test "$CYGWIN32" = yes || test "$MINGW32" = yes; then -am_cv_exeext=.exe -else -cat > am_c_test.c << 'EOF' -int main() { -/* Nothing needed here */ -} +cat >> confdefs.h <&5 -am_cv_exeext= -for file in am_c_test.*; do - case $file in - *.c) ;; - *.o) ;; - *) am_cv_exeext=`echo $file | sed -e s/am_c_test//` ;; - esac -done -rm -f am_c_test* -fi -test x"${am_cv_exeext}" = x && am_cv_exeext=no + +build_warnings="-W -Wall" +# Check whether --enable-build-warnings or --disable-build-warnings was given. +if test "${enable_build_warnings+set}" = set; then + enableval="$enable_build_warnings" + case "${enableval}" in + yes) ;; + no) build_warnings="-w";; + ,*) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${build_warnings} ${t}";; + *,) t=`echo "${enableval}" | sed -e "s/,/ /g"` + build_warnings="${t} ${build_warnings}";; + *) build_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; +esac +if test x"$silent" != x"yes" && test x"$build_warnings" != x""; then + echo "Setting warning flags = $build_warnings" 6>&1 +fi +fi +WARN_CFLAGS="" +if test "x${build_warnings}" != x -a "x$GCC" = xyes ; then + WARN_CFLAGS="${build_warnings}" fi -EXEEXT="" -test x"${am_cv_exeext}" != xno && EXEEXT=${am_cv_exeext} -echo "$ac_t""${am_cv_exeext}" 1>&6 trap '' 1 2 15 @@ -3461,7 +4413,7 @@ EOF # Ultrix sh set writes to stderr and can't be redirected directly, # and sets the high bit in the cache file unless we assign to the vars. (set) 2>&1 | - case `(ac_space=' '; set) 2>&1 | grep ac_space` in + case `(ac_space=' '; set | grep ac_space) 2>&1` in *ac_space=\ *) # `set' does not quote correctly, so add quotes (double-quote substitution # turns \\\\ into \\, and sed turns \\ into \). @@ -3528,7 +4480,7 @@ do echo "running \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion" exec \${CONFIG_SHELL-/bin/sh} $0 $ac_configure_args --no-create --no-recursion ;; -version | --version | --versio | --versi | --vers | --ver | --ve | --v) - echo "$CONFIG_STATUS generated by autoconf version 2.12.1" + echo "$CONFIG_STATUS generated by autoconf version 2.13" exit 0 ;; -help | --help | --hel | --he | --h) echo "\$ac_cs_usage"; exit 0 ;; @@ -3552,6 +4504,7 @@ s%@SHELL@%$SHELL%g s%@CFLAGS@%$CFLAGS%g s%@CPPFLAGS@%$CPPFLAGS%g s%@CXXFLAGS@%$CXXFLAGS%g +s%@FFLAGS@%$FFLAGS%g s%@DEFS@%$DEFS%g s%@LDFLAGS@%$LDFLAGS%g s%@LIBS@%$LIBS%g @@ -3586,8 +4539,8 @@ s%@build_cpu@%$build_cpu%g s%@build_vendor@%$build_vendor%g s%@build_os@%$build_os%g s%@INSTALL_PROGRAM@%$INSTALL_PROGRAM%g -s%@INSTALL_DATA@%$INSTALL_DATA%g s%@INSTALL_SCRIPT@%$INSTALL_SCRIPT%g +s%@INSTALL_DATA@%$INSTALL_DATA%g s%@PACKAGE@%$PACKAGE%g s%@VERSION@%$VERSION%g s%@ACLOCAL@%$ACLOCAL%g @@ -3596,14 +4549,13 @@ s%@AUTOMAKE@%$AUTOMAKE%g s%@AUTOHEADER@%$AUTOHEADER%g s%@MAKEINFO@%$MAKEINFO%g s%@SET_MAKE@%$SET_MAKE%g -s%@RANLIB@%$RANLIB%g s%@CC@%$CC%g -s%@LD@%$LD%g -s%@NM@%$NM%g s%@LN_S@%$LN_S%g +s%@OBJEXT@%$OBJEXT%g +s%@EXEEXT@%$EXEEXT%g +s%@RANLIB@%$RANLIB%g +s%@STRIP@%$STRIP%g s%@LIBTOOL@%$LIBTOOL%g -s%@DLLTOOL@%$DLLTOOL%g -s%@AS@%$AS%g s%@CPP@%$CPP%g s%@ALLOCA@%$ALLOCA%g s%@USE_NLS@%$USE_NLS%g @@ -3626,8 +4578,10 @@ s%@GT_NO@%$GT_NO%g s%@GT_YES@%$GT_YES%g s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g s%@l@%$l%g +s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g +s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g -s%@EXEEXT@%$EXEEXT%g +s%@WARN_CFLAGS@%$WARN_CFLAGS%g CEOF EOF