X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=include%2Flinux%2Fethtool.h;h=560a247bde2a219237c0076b8f6d33323de806a2;hb=02eacbd0c405d378d2357e8e0fac5de981bd40f8;hp=da5b2de99ae450a1239cfb3cf6f24d7e71fc9b4c;hpb=86e06008338e5712603613a0f6770500f79e83bd;p=deliverable%2Flinux.git

diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h
index da5b2de99ae4..560a247bde2a 100644
--- a/include/linux/ethtool.h
+++ b/include/linux/ethtool.h
@@ -30,10 +30,15 @@ struct ethtool_cmd {
 				 * access it */
 	__u8	duplex;		/* Duplex, half or full */
 	__u8	port;		/* Which connector port */
-	__u8	phy_address;
+	__u8	phy_address;	/* MDIO PHY address (PRTAD for clause 45).
+				 * May be read-only or read-write
+				 * depending on the driver.
+				 */
 	__u8	transceiver;	/* Which transceiver to use */
 	__u8	autoneg;	/* Enable or disable autonegotiation */
-	__u8	mdio_support;
+	__u8	mdio_support;	/* MDIO protocols supported.  Read-only.
+				 * Not set by all drivers.
+				 */
 	__u32	maxtxpkt;	/* Tx pkts before generating tx int */
 	__u32	maxrxpkt;	/* Rx pkts before generating rx int */
 	__u16	speed_hi;       /* The forced speed (upper
@@ -59,6 +64,20 @@ static inline __u32 ethtool_cmd_speed(const struct ethtool_cmd *ep)
 	return (ep->speed_hi << 16) | ep->speed;
 }
 
+/* Device supports clause 22 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h>.  This should not be
+ * set if there are known to be no such peripherals present or if
+ * the driver only emulates clause 22 registers for compatibility.
+ */
+#define ETH_MDIO_SUPPORTS_C22	1
+
+/* Device supports clause 45 register access to PHY or peripherals
+ * using the interface defined in <linux/mii.h> and <linux/mdio.h>.
+ * This should not be set if there are known to be no such peripherals
+ * present.
+ */
+#define ETH_MDIO_SUPPORTS_C45	2
+
 #define ETHTOOL_FWVERS_LEN	32
 #define ETHTOOL_BUSINFO_LEN	32
 /* these strings are set to whatever the driver author decides... */
@@ -707,6 +726,29 @@ struct ethtool_sfeatures {
 	struct ethtool_set_features_block features[0];
 };
 
+/**
+ * struct ethtool_ts_info - holds a device's timestamping and PHC association
+ * @cmd: command number = %ETHTOOL_GET_TS_INFO
+ * @so_timestamping: bit mask of the sum of the supported SO_TIMESTAMPING flags
+ * @phc_index: device index of the associated PHC, or -1 if there is none
+ * @tx_types: bit mask of the supported hwtstamp_tx_types enumeration values
+ * @rx_filters: bit mask of the supported hwtstamp_rx_filters enumeration values
+ *
+ * The bits in the 'tx_types' and 'rx_filters' fields correspond to
+ * the 'hwtstamp_tx_types' and 'hwtstamp_rx_filters' enumeration values,
+ * respectively.  For example, if the device supports HWTSTAMP_TX_ON,
+ * then (1 << HWTSTAMP_TX_ON) in 'tx_types' will be set.
+ */
+struct ethtool_ts_info {
+	__u32	cmd;
+	__u32	so_timestamping;
+	__s32	phc_index;
+	__u32	tx_types;
+	__u32	tx_reserved[3];
+	__u32	rx_filters;
+	__u32	rx_reserved[3];
+};
+
 /*
  * %ETHTOOL_SFEATURES changes features present in features[].valid to the
  * values of corresponding bits in features[].requested. Bits in .requested
@@ -769,6 +811,7 @@ struct net_device;
 
 /* Some generic methods drivers may use in their ethtool_ops */
 u32 ethtool_op_get_link(struct net_device *dev);
+int ethtool_op_get_ts_info(struct net_device *dev, struct ethtool_ts_info *eti);
 
 /**
  * ethtool_rxfh_indir_default - get default value for RX flow hash indirection
@@ -874,6 +917,9 @@ static inline u32 ethtool_rxfh_indir_default(u32 index, u32 n_rx_rings)
  * 		   and flag of the device.
  * @get_dump_data: Get dump data.
  * @set_dump: Set dump specific flags to the device.
+ * @get_ts_info: Get the time stamping and PTP hardware clock capabilities.
+ *	Drivers supporting transmit time stamps in software should set this to
+ *	ethtool_op_get_ts_info().
  *
  * All operations are optional (i.e. the function pointer may be set
  * to %NULL) and callers must take this into account.  Callers must
@@ -936,6 +982,7 @@ struct ethtool_ops {
 	int	(*get_dump_data)(struct net_device *,
 				 struct ethtool_dump *, void *);
 	int	(*set_dump)(struct net_device *, struct ethtool_dump *);
+	int	(*get_ts_info)(struct net_device *, struct ethtool_ts_info *);
 
 };
 #endif /* __KERNEL__ */
@@ -1010,6 +1057,7 @@ struct ethtool_ops {
 #define ETHTOOL_SET_DUMP	0x0000003e /* Set dump settings */
 #define ETHTOOL_GET_DUMP_FLAG	0x0000003f /* Get dump settings */
 #define ETHTOOL_GET_DUMP_DATA	0x00000040 /* Get dump data */
+#define ETHTOOL_GET_TS_INFO	0x00000041 /* Get time stamping and PHC info */
 
 /* compatibility with older code */
 #define SPARC_ETH_GSET		ETHTOOL_GSET