X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=include%2Fnet%2Fcfg80211.h;h=8d04dfef32bf298f9de387d5f0b4b9aa56104edc;hb=1057d35ede5dbf7ed7842357564fb42c9b54ba50;hp=a2ddcf2398fdadf43bcb5ccc12891aba20f0c946;hpb=8a5de18239e418fe7b1f36504834689f754d8ccc;p=deliverable%2Flinux.git diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a2ddcf2398fd..8d04dfef32bf 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -319,9 +319,12 @@ struct ieee80211_supported_band { /** * struct vif_params - describes virtual interface parameters * @use_4addr: use 4-address frames - * @macaddr: address to use for this virtual interface. This will only - * be used for non-netdevice interfaces. If this parameter is set - * to zero address the driver may determine the address as needed. + * @macaddr: address to use for this virtual interface. + * If this parameter is set to zero address the driver may + * determine the address as needed. + * This feature is only fully supported by drivers that enable the + * %NL80211_FEATURE_MAC_ON_CREATE flag. Others may support creating + ** only p2p devices with specified MAC. */ struct vif_params { int use_4addr; @@ -798,6 +801,22 @@ struct station_parameters { bool opmode_notif_used; }; +/** + * struct station_del_parameters - station deletion parameters + * + * Used to delete a station entry (or all stations). + * + * @mac: MAC address of the station to remove or NULL to remove all stations + * @subtype: Management frame subtype to use for indicating removal + * (10 = Disassociation, 12 = Deauthentication) + * @reason_code: Reason code for the Disassociation/Deauthentication frame + */ +struct station_del_parameters { + const u8 *mac; + u8 subtype; + u16 reason_code; +}; + /** * enum cfg80211_station_type - the type of station being modified * @CFG80211_STA_AP_CLIENT: client of an AP interface @@ -1339,6 +1358,16 @@ struct mesh_setup { u32 basic_rates; }; +/** + * struct ocb_setup - 802.11p OCB mode setup configuration + * @chandef: defines the channel to use + * + * These parameters are fixed when connecting to the network + */ +struct ocb_setup { + struct cfg80211_chan_def chandef; +}; + /** * struct ieee80211_txq_params - TX queue parameters * @ac: AC identifier @@ -2132,7 +2161,7 @@ struct cfg80211_qos_map { * @stop_ap: Stop being an AP, including stopping beaconing. * * @add_station: Add a new station. - * @del_station: Remove a station; @mac may be NULL to remove all stations. + * @del_station: Remove a station * @change_station: Modify a given station. Note that flags changes are not much * validated in cfg80211, in particular the auth/assoc/authorized flags * might come to the driver in invalid combinations -- make sure to check @@ -2146,6 +2175,8 @@ struct cfg80211_qos_map { * @change_mpath: change a given mesh path * @get_mpath: get a mesh path for the given parameters * @dump_mpath: dump mesh path callback -- resume dump at index @idx + * @get_mpp: get a mesh proxy path for the given parameters + * @dump_mpp: dump mesh proxy path callback -- resume dump at index @idx * @join_mesh: join the mesh network with the specified parameters * (invoked with the wireless_dev mutex held) * @leave_mesh: leave the current mesh network @@ -2331,6 +2362,17 @@ struct cfg80211_qos_map { * with the peer followed by immediate teardown when the addition is later * rejected) * @del_tx_ts: remove an existing TX TS + * + * @join_ocb: join the OCB network with the specified parameters + * (invoked with the wireless_dev mutex held) + * @leave_ocb: leave the current OCB network + * (invoked with the wireless_dev mutex held) + * + * @tdls_channel_switch: Start channel-switching with a TDLS peer. The driver + * is responsible for continually initiating channel-switching operations + * and returning to the base channel for communication with the AP. + * @tdls_cancel_channel_switch: Stop channel-switching with a TDLS peer. Both + * peers must be on the base channel when the call completes. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2376,7 +2418,7 @@ struct cfg80211_ops { const u8 *mac, struct station_parameters *params); int (*del_station)(struct wiphy *wiphy, struct net_device *dev, - const u8 *mac); + struct station_del_parameters *params); int (*change_station)(struct wiphy *wiphy, struct net_device *dev, const u8 *mac, struct station_parameters *params); @@ -2396,6 +2438,11 @@ struct cfg80211_ops { int (*dump_mpath)(struct wiphy *wiphy, struct net_device *dev, int idx, u8 *dst, u8 *next_hop, struct mpath_info *pinfo); + int (*get_mpp)(struct wiphy *wiphy, struct net_device *dev, + u8 *dst, u8 *mpp, struct mpath_info *pinfo); + int (*dump_mpp)(struct wiphy *wiphy, struct net_device *dev, + int idx, u8 *dst, u8 *mpp, + struct mpath_info *pinfo); int (*get_mesh_config)(struct wiphy *wiphy, struct net_device *dev, struct mesh_config *conf); @@ -2407,6 +2454,10 @@ struct cfg80211_ops { const struct mesh_setup *setup); int (*leave_mesh)(struct wiphy *wiphy, struct net_device *dev); + int (*join_ocb)(struct wiphy *wiphy, struct net_device *dev, + struct ocb_setup *setup); + int (*leave_ocb)(struct wiphy *wiphy, struct net_device *dev); + int (*change_bss)(struct wiphy *wiphy, struct net_device *dev, struct bss_parameters *params); @@ -2577,6 +2628,14 @@ struct cfg80211_ops { u16 admitted_time); int (*del_tx_ts)(struct wiphy *wiphy, struct net_device *dev, u8 tsid, const u8 *peer); + + int (*tdls_channel_switch)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *addr, u8 oper_class, + struct cfg80211_chan_def *chandef); + void (*tdls_cancel_channel_switch)(struct wiphy *wiphy, + struct net_device *dev, + const u8 *addr); }; /* @@ -2623,13 +2682,9 @@ struct cfg80211_ops { * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in * beaconing mode (AP, IBSS, Mesh, ...). - * @WIPHY_FLAG_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM - * TSPEC sessions (TID aka TSID 0-7) with the NL80211_CMD_ADD_TX_TS - * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it - * needs to be able to handle Block-Ack agreements and other things. */ enum wiphy_flags { - WIPHY_FLAG_SUPPORTS_WMM_ADMISSION = BIT(0), + /* use hole at 0 */ /* use hole at 1 */ /* use hole at 2 */ WIPHY_FLAG_NETNS_OK = BIT(3), @@ -3165,6 +3220,23 @@ static inline const char *wiphy_name(const struct wiphy *wiphy) return dev_name(&wiphy->dev); } +/** + * wiphy_new_nm - create a new wiphy for use with cfg80211 + * + * @ops: The configuration operations for this device + * @sizeof_priv: The size of the private area to allocate + * @requested_name: Request a particular name. + * NULL is valid value, and means use the default phy%d naming. + * + * Create a new wiphy and associate the given operations with it. + * @sizeof_priv bytes are allocated for private use. + * + * Return: A pointer to the new wiphy. This pointer must be + * assigned to each netdev's ieee80211_ptr for proper operation. + */ +struct wiphy *wiphy_new_nm(const struct cfg80211_ops *ops, int sizeof_priv, + const char *requested_name); + /** * wiphy_new - create a new wiphy for use with cfg80211 * @@ -3177,7 +3249,11 @@ static inline const char *wiphy_name(const struct wiphy *wiphy) * Return: A pointer to the new wiphy. This pointer must be * assigned to each netdev's ieee80211_ptr for proper operation. */ -struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv); +static inline struct wiphy *wiphy_new(const struct cfg80211_ops *ops, + int sizeof_priv) +{ + return wiphy_new_nm(ops, sizeof_priv, NULL); +} /** * wiphy_register - register a wiphy with cfg80211 @@ -4657,6 +4733,20 @@ bool cfg80211_reg_can_beacon(struct wiphy *wiphy, void cfg80211_ch_switch_notify(struct net_device *dev, struct cfg80211_chan_def *chandef); +/* + * cfg80211_ch_switch_started_notify - notify channel switch start + * @dev: the device on which the channel switch started + * @chandef: the future channel definition + * @count: the number of TBTTs until the channel switch happens + * + * Inform the userspace about the channel switch that has just + * started, so that it can take appropriate actions (eg. starting + * channel switch on other vifs), if necessary. + */ +void cfg80211_ch_switch_started_notify(struct net_device *dev, + struct cfg80211_chan_def *chandef, + u8 count); + /** * ieee80211_operating_class_to_band - convert operating class to band *