X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=opcodes%2FChangeLog;h=cb239a5546dcbf754583997d88eb3a6823b0a36c;hb=c500c07496c29071b32f68e015b12dd7c7c969fc;hp=0e6bbd04313410b6ef192b89914b87ae79f751bc;hpb=a952ea1cb86428d50d20cdee90c5705100c8ae2a;p=deliverable%2Fbinutils-gdb.git diff --git a/opcodes/ChangeLog b/opcodes/ChangeLog index 0e6bbd0431..cb239a5546 100644 --- a/opcodes/ChangeLog +++ b/opcodes/ChangeLog @@ -1,3 +1,357 @@ +start-sanitize-v850 +Tue Oct 29 12:22:21 1996 Jeffrey A Law (law@cygnus.com) + + * v850-opc.c (D9_RELAX): Renamed from D9, all references + changed. + (v850_operands): Make sure D22 immediately follows D9_RELAX. + +end-sanitize-v850 +Fri Oct 25 12:12:53 1996 Ian Lance Taylor + + * i386-dis.c (print_insn_x86): Set info->bytes_per_line to 5. + +start-sanitize-v850 +Thu Oct 24 17:53:52 1996 Jeffrey A Law (law@cygnus.com) + + * v850-opc.c (insert_d8_6): Fix operand insertion for sld.w + and sst.w instructions. + + * v850-opc.c (v850_opcodes): Add "jCC" instructions (aliases for + "bCC"instructions). + +end-sanitize-v850 +Thu Oct 24 17:21:20 1996 Ian Lance Taylor + + * mips-dis.c (_print_insn_mips): Use a tab between the instruction + and the arguments. + +Tue Oct 22 23:32:56 1996 Ian Lance Taylor + + * ppc-opc.c (PPCPWR2): Define. + (powerpc_opcodes): Use PPCPWR2 for fsqrt, rather than duplicating + it. + +Fri Oct 11 16:03:49 1996 Jeffrey A Law (law@cygnus.com) + + * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode + field for movhu instruction. +start-sanitize-v850 + + * v850-dis.c (disassemble): For V850_OPERAND_SIGNED operands, + cast value to "long" not "signed long" to keep hpux10 + compiler quiet. +end-sanitize-v850 + +Thu Oct 10 10:25:58 1996 Jeffrey A Law (law@cygnus.com) + + * mn10300-opc.c (mn10300_opcodes): Fix typo in opcode field + for mov (abs16),DN. + + * mn10300-opc.c (FMT*): Remove definitions. + + * mn10300-opc.c (mn10300_opcodes): Fix destination register + for shift-by-register opcodes. + + * mn10300-opc.c (mn10300_operands): Break DN, DM, AN, AM + into [AD][MN][01] for encoding the position of the register + in the opcode. + +Wed Oct 9 11:19:26 1996 Jeffrey A Law (law@cygnus.com) + + * mn10300-opc.c (mn10300_opcodes): Add "extended" instructions, + "putx", "getx", "mulq", "mulqu", "sat16", "sat24", "bsch". + +Tue Oct 8 11:55:35 1996 Jeffrey A Law (law@cygnus.com) + + * mn10300-opc.c (mn10300_operands): Remove "REGS" operand. + Fix various typos. Add "PAREN" operand. + (MEM, MEM2): Define. + (mn10300_opcodes): Surround all memory addresses with "PAREN" + operands. Fix several typos. + + * mn10300-opc.c (mn10300_opcodes): Fix typos in yesterday's + changes. + +Mon Oct 7 16:48:45 1996 Jeffrey A Law (law@cygnus.com) + + * mn10300-opc.c (FMT_XX): Renumber starting at one. + (mn10300_operands): Rough cut. Enough to parse "mov" instructions + at this time. + (mn10300_opcodes): Break opcode format out into its own field. + Update many operand fields to deal with signed vs unsigned + issues. Fix one or two typos in the "mov" instruction + opcode, mask and/or operand fields. + +Mon Oct 7 11:39:49 1996 Andreas Schwab + + * m68k-opc.c (plusha): Prefer encoding for m68040up, in case + m68851 wasn't reset. + +Thu Oct 3 17:17:02 1996 Ian Lance Taylor + + * mn10300-opc.c (mn10300_opcodes): Add opcode & masks for + all opcodes. Very rough cut at operands for all opcodes. + + * mn10300-opc.c (mn10300_opcodes): Start fleshing out the + opcode table. + +Thu Oct 3 10:06:07 1996 Jeffrey A Law (law@cygnus.com) + + * mn10200-opc.c, mn10300-opc.c: New files. + * mn10200-dis.c, mn10300-dis.c: New files. + * mn10x00-opc.c, mn10x00-dis.c: Deleted. + * disassemble.c: Break mn10x00 support into 10200 and 10300 + support. + * configure.in: Likewise. + * configure: Rebuilt. + +Thu Oct 3 15:59:12 1996 Jason Molenda (crash@godzilla.cygnus.co.jp) + + * Makefile.in (MOSTLYCLEAN): Move config.log to distclean. + +Wed Oct 2 23:28:42 1996 Jeffrey A Law (law@cygnus.com) + + * mn10x00-opc.c, mn10x00-dis.c: New files for Matsushita + MN10x00 processors. + * disassemble (ARCH_mn10x00): Define. + (disassembler): Handle bfd_arch_mn10x00. + * configure.in: Recognize bfd_mn10x00_arch. + * configure: Rebuilt. + +Tue Oct 1 10:49:11 1996 Ian Lance Taylor + + * i386-dis.c (op_rtn): Change to be a pointer. Adjust uses + accordingly. Don't declare functions using op_rtn. + +start-sanitize-v850 +Fri Sep 27 18:28:59 1996 Stu Grossman (grossman@critters.cygnus.com) + + * v850-dis.c (disassemble): Add memaddr argument. Re-arrange + params to be more standard. + * (disassemble): Print absolute addresses and symbolic names for + branch and jump targets. + * v850-opc.c (v850_operand): Add displacement flag to 9 and 22 + bit operands. + * (v850_opcodes): Add breakpoint insn. + +end-sanitize-v850 +Mon Sep 23 12:32:26 1996 Ian Lance Taylor + + * m68k-opc.c: Move the fmovemx data register cases before the + other cases, so that they get recognized before the data register + does gets treated as a degenerate register list. + +Tue Sep 17 12:06:51 1996 Ian Lance Taylor + + * mips-opc.c: Add a case for "div" and "divu" with two registers + and a destination of $0. + +Tue Sep 10 16:12:39 1996 Fred Fish + + * mips-dis.c (print_insn_arg): Add prototype. + (_print_insn_mips): Ditto. + +Mon Sep 9 14:26:26 1996 Ian Lance Taylor + + * mips-dis.c (print_insn_arg): Print condition code registers as + $fccN. + +Tue Sep 3 12:09:46 1996 Doug Evans + + * sparc-opc.c (sparc_opcodes): Add setuw, setsw, setx. + +start-sanitize-v850 +Tue Sep 3 12:05:25 1996 Jeffrey A Law (law@cygnus.com) + + * v850-dis.c (disassemble): Make static. Provide prototype. + +Sun Sep 1 22:30:40 1996 Jeffrey A Law (law@cygnus.com) + + * v850-opc.c (insert_d9, insert_d22): Fix boundary case + in range checks. + +Sat Aug 31 01:27:26 1996 Jeffrey A Law (law@cygnus.com) + + * v850-dis.c (disassemble): Handle insertion of ',', '[' and + ']' characters into the output stream. + * v850-opc.c (v850_opcodes: Remove size field from all opcodes. + Add "memop" field to all opcodes (for the disassembler). + Reorder opcodes so that "nop" comes before "mov" and "jr" + comes before "jarl". + + * v850-dis.c (print_insn_v850): Fix typo in last change. + + * v850-dis.c (print_insn_v850): Properly handle disassembling + a two byte insn at the end of a memory region when the memory + region's size is only two byte aligned. + + * v850-dis.c (v850_cc_names): Fix stupid thinkos. + + * v850-dis.c (v850_reg_names): Define. + (v850_sreg_names, v850_cc_names): Likewise. + (disassemble): Very rough cut at printing operands (unformatted). + + * v850-opc.c (BOP_MASK): Fix. + (v850_opcodes): Fix mask for jarl and jr. + + * v850-dis.c: New file. Skeleton for disassembler support. + * Makefile.in Remove v850 references, they're not needed here + and they weren't being sanitized away. + * configure.in: Add v850-dis.o when building v850 toolchains. + * configure: Rebuilt. + * disassemble.c (disassembler): Call v850 disassembler. + + * v850-opc.c (insert_d8_7, extract_d8_7): New functions. + (insert_d8_6, extract_d8_6): New functions. + (v850_operands): Rename D7S to D7; operand for D7 is unsigned. + Rename D8 to D8_7, use {insert,extract}_d8_7 routines. + Add D8_6. + (IF4A, IF4B): Use "D7" instead of "D7S". + (IF4C, IF4D): Use "D8_7" instead of "D8". + (IF4E, IF4F): New. Use "D8_6". + (v850_opcodes): Use IF4A/IF4B for sld.b/sst.b. Use IF4C/IF4D for + sld.h/sst.h. Use IF4E/IF4F for sld.w/sst.w. + + * v850-opc.c (insert_d16_15, extract_d16_15): New functions. + (v850_operands): Change D16 to D16_15, use special insert/extract + routines. New new D16 that uses the generic insert/extract code. + (IF7A, IF7B): Use D16_15. + (IF7C, IF7D): New. Use D16. + (v850_opcodes): Use IF7C and IF7D for ld.b and st.b. + + * v850-opc.c (insert_d9, insert_d22): Slightly improve error + message. Issue an error if the branch offset is odd. + + * v850-opc.c: Add notes about needing special insert/extract + for all the load/store insns, except "ld.b" and "st.b". + + * v850-opc.c (insert_d22, extract_d22): New functions. + (v850_operands): Use insert_d22 and extract_d22 for + D22 operands. + (insert_d9): Fix range check. + +Fri Aug 30 18:01:02 1996 J.T. Conklin + + * v850-opc.c (v850_operands): Add V850_OPERAND_SIGNED flag + and set bits field to D9 and D22 operands. + +Thu Aug 29 11:10:46 1996 Jeffrey A Law (law@cygnus.com) + + * v850-opc.c (v850_operands): Define SR2 operand. + (v850_opcodes): "ldsr" uses R1,SR2. + + * v850-opc.c (v850_opcodes): Fix opcode specs for + sld.w, sst.b, sst.h, sst.w, and nop. + +Wed Aug 28 15:55:43 1996 Jeffrey A Law (law@cygnus.com) + + * v850-opc.c (v850_opcodes): Add null opcode to mark the + end of the opcode table. + +end-sanitize-v850 +start-sanitize-d10v +Mon Aug 26 13:35:53 1996 Martin M. Hunt + + * d10v-opc.c (pre_defined_registers): Added register pairs, + "r0-r1", "r2-r3", etc. + +end-sanitize-d10v +start-sanitize-v850 +Fri Aug 23 00:27:01 1996 Jeffrey A Law (law@cygnus.com) + + * v850-opc.c (v850_operands): Make I16 be a signed operand. + Create I16U for an unsigned 16bit mmediate operand. + (v850_opcodes): Use I16U for "ori", "andi" and "xori". + + * v850-opc.c (v850_operands): Define EP operand. + (IF4A, IF4B, IF4C, IF4D): Use EP. + + * v850-opc.c (v850_opcodes): Fix opcode numbers for "mov" + with immediate operand, "movhi". Tweak "ldsr". + + * v850-opc.c (v850_opcodes): Get ld.[bhw] and st.[bhw] + correct. Get sld.[bhw] and sst.[bhw] closer. + + * v850-opc.c (v850_operands): "not" is a two byte insn + + * v850-opc.c (v850_opcodes): Correct bit pattern for setf. + + * v850-opc.c (v850_operands): D16 inserts at offset 16! + + * v850-opc.c (two): Get order of words correct. + + * v850-opc.c (v850_operands): I16 inserts at offset 16! + + * v850-opc.c (v850_operands): Add "SR1" and "SR2" for system + register source and destination operands. + (v850_opcodes): Use SR1 and SR2 for "ldsr" and "stsr". + + * v850-opc.c (v850_opcodes): Fix thinko in "jmp" opcode. Fix + same thinko in "trap" opcode. + + * v850-opc.c (v850_opcodes): Add initializer for size field + on all opcodes. + + * v850-opc.c (v850_operands): D6 -> DS7. References changed. + Add D8 for 8-bit unsigned field in short load/store insns. + (IF4A, IF4D): These both need two registers. + (IF4C, IF4D): Define. Use 8-bit unsigned field. + (v850_opcodes): For "sld.h", "sld.w", "sst.h", "sst.w", use + IF4C & IF4D. For "trap" use I5U, not I5. Add IF1 operand + for "ldsr" and "stsr". + * v850-opc.c (v850_operands): 3-bit immediate for bit insns + is unsigned. + + * v850-opc.c (v850_opcodes): Correct short store half (sst.h) and + short store word (sst.w). + +Thu Aug 22 16:57:27 1996 J.T. Conklin + + * v850-opc.c (v850_operands): Added insert and extract fields, + pointers to functions that handle unusual operand encodings. + +Thu Aug 22 01:05:24 1996 Jeffrey A Law (law@cygnus.com) + + * v850-opc.c (v850_opcodes): Enable "trap". + + * v850-opc.c (v850_opcodes): Fix order of displacement + and register for "set1", "clr1", "not1", and "tst1". + +Wed Aug 21 18:46:26 1996 Jeffrey A Law (law@cygnus.com) + + * v850-opc.c (v850_operands): Add "B3" support. + (v850_opcodes): Fix and enable "set1", "clr1", "not1" + and "tst1". + + * v850-opc.c (v850_opcodes): "jmp" has only an R1 operand. + + * v850-opc.c: Close unterminated comment. + +Wed Aug 21 17:31:26 1996 J.T. Conklin + + * v850-opc.c (v850_operands): Add flags field. + (v850_opcodes): add move opcodes. + +Tue Aug 20 14:41:03 1996 J.T. Conklin + + * Makefile.in (ALL_MACHINES): Add v850-opc.o. + * configure: (bfd_v850v_arch) Add new case. + * configure.in: (bfd_v850_arch) Add new case. + * v850-opc.c: New file. + +end-sanitize-v850 +Mon Aug 19 15:21:38 1996 Doug Evans + + * sparc-dis.c (print_insn_sparc): Handle little endian sparcs. + +start-sanitize-d10v +Thu Aug 15 13:14:43 1996 Martin M. Hunt + + * d10v-opc.c: Add additional information to the opcode + table to help determinine which instructions can be done + in parallel. + +end-sanitize-d10v Thu Aug 15 13:11:13 1996 Stan Shebs * mpw-make.sed: Update editing of include pathnames to be