X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=opcodes%2Facinclude.m4;h=3a47b1b67c48cf26a276f5636e95d98b6a35d6e1;hb=707960fed520b85843c8ba36f3a0c6aadf92cffc;hp=1d38781c8bb3c98e7bb64b10380f3c35de73df6d;hpb=1daed53f649e59ca014be31f814b040eb4d940d6;p=deliverable%2Fbinutils-gdb.git

diff --git a/opcodes/acinclude.m4 b/opcodes/acinclude.m4
index 1d38781c8b..3a47b1b67c 100644
--- a/opcodes/acinclude.m4
+++ b/opcodes/acinclude.m4
@@ -1,111 +1,24 @@
-sinclude(../bfd/acmacros.m4)
-
-dnl This is a copy of AM_PROG_LIBTOOL from libtool 1.0, modified to
-dnl not produce a shared library by default.
-AC_DEFUN(AM_PROG_LIBTOOL,
-[AC_REQUIRE([AC_CANONICAL_HOST])
-AC_REQUIRE([AC_PROG_CC])
-AC_REQUIRE([AC_PROG_RANLIB])
-AC_REQUIRE([AM_PROG_LD])
-AC_REQUIRE([AC_PROG_LN_S])
-
-# Always use our own libtool.
-LIBTOOL='$(top_builddir)/libtool'
+sinclude(../bfd/acinclude.m4)
+
+dnl sinclude(../libtool.m4) already included in bfd/acinclude.m4
+dnl The lines below arrange for aclocal not to bring libtool.m4
+dnl AM_PROG_LIBTOOL into aclocal.m4, while still arranging for automake
+dnl to add a definition of LIBTOOL to Makefile.in.
+ifelse(yes,no,[
+AC_DEFUN([AM_PROG_LIBTOOL],)
+AC_DEFUN([AM_DISABLE_SHARED],)
 AC_SUBST(LIBTOOL)
-
-dnl Allow the --disable-shared flag to stop us from building shared libs.
-AC_ARG_ENABLE(shared,
-[  --enable-shared         build shared libraries [default=yes]],
-test "$enableval" = no && libtool_shared=" --disable-shared",
-libtool_shared=--disable-shared)
-
-dnl Allow the --disable-static flag to stop us from building static libs.
-AC_ARG_ENABLE(static,
-[  --enable-static         build static libraries [default=yes]],
-test "$enableval" = no && libtool_static=" --disable-static",
-libtool_static=)
-
-libtool_flags="$libtool_shared$libtool_static"
-test "$silent" = yes && libtool_flags="$libtool_flags --silent"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-[case "$host" in
-*-*-irix6*)
-  for f in '-32' '-64' '-cckr' '-n32' '-mips1' '-mips2' '-mips3' '-mips4'; do
-    if echo " $CC $CFLAGS " | egrep -e "[ 	]$f[	 ]" > /dev/null; then
-      LD="${LD-ld} $f"
-    fi
-  done
-  ;;
-
-*-*-sco3.2v5*)
-  # On SCO OpenServer 5, we need -belf to get full-featured binaries.
-  CFLAGS="$CFLAGS -belf"
-  ;;
-esac]
-
-# Actually configure libtool.  ac_aux_dir is where install-sh is found.
-CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-LD="$LD" RANLIB="$RANLIB" LN_S="$LN_S" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig \
-$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
 ])
 
-# AM_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AM_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[  --with-gnu-ld           assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-if test "$with_gnu_ld" = yes; then
-  AC_MSG_CHECKING([for GNU ld])
-else
-  AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[case "$LD" in
-  /*)
-  ac_cv_path_LD="$LD" # Let the user override the test with a path.
-  ;;
-  *)
-  IFS="${IFS= 	}"; ac_save_ifs="$IFS"; IFS="${IFS}:"
-  for ac_dir in $PATH; do
-    test -z "$ac_dir" && ac_dir=.
-    if test -f "$ac_dir/ld"; then
-      ac_cv_path_LD="$ac_dir/ld"
-      # Check to see if the program is GNU ld.  I'd rather use --version,
-      # but apparently some GNU ld's only accept -v.
-      # Break only if it was the GNU/non-GNU ld that we prefer.
-      if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
-	test "$with_gnu_ld" = yes && break
-      else
-        test "$with_gnu_ld" != yes && break
-      fi
-    fi
-  done
-  IFS="$ac_save_ifs"
-  ;;
-esac])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
-  AC_MSG_RESULT($LD)
-else
-  AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_SUBST(LD)
-AM_PROG_LD_GNU
+dnl sinclude(../gettext.m4) already included in bfd/acinclude.m4
+ifelse(yes,no,[
+AC_DEFUN([CY_WITH_NLS],)
+AC_SUBST(INTLLIBS)
 ])
 
-AC_DEFUN(AM_PROG_LD_GNU,
-[AC_CACHE_CHECK([whether we are using GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU ld|with BFD)' > /dev/null; then
-  ac_cv_prog_gnu_ld=yes
-else
-  ac_cv_prog_gnu_ld=no
-fi])
+dnl AM_INSTALL_LIBBFD already included in bfd/acinclude.m4
+ifelse(yes,no,[
+AC_DEFUN([AM_INSTALL_LIBBFD],)
+AC_SUBST(bfdlibdir)
+AC_SUBST(bfdincludedir)
 ])