X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=org.eclipse.linuxtools.lttng.help%2Fdoc%2FUser-Guide.mediawiki;h=7b237dc995bb2ca231abb85ee7d9a312b80516cd;hb=cd7c36d21ce2d05f07acdcdc8df30bac57d3e8f2;hp=0c390e5d1667699d9e5152e21e894b8fa5a079f9;hpb=e799e5f3d0d6261e862b20fc0b280dc16e34333f;p=deliverable%2Ftracecompass.git diff --git a/org.eclipse.linuxtools.lttng.help/doc/User-Guide.mediawiki b/org.eclipse.linuxtools.lttng.help/doc/User-Guide.mediawiki index 0c390e5d16..7b237dc995 100644 --- a/org.eclipse.linuxtools.lttng.help/doc/User-Guide.mediawiki +++ b/org.eclipse.linuxtools.lttng.help/doc/User-Guide.mediawiki @@ -112,10 +112,9 @@ Here are the quick steps to verify that your installation is functional: ** Right-click in the Project view and select "New Project" ** Enter the name of your project (e.g. "MyLTTngProject") ** The project will be created. It will contain 2 empty folders: "Traces" and "Experiments" -* Import a sample trace -** Right-click on the newly created project "Traces" folder and select "Import..." +* Open a sample trace +** Right-click on the newly created project "Traces" folder and select "Open Trace Directory..." ** Navigate to the sample LTTng trace that you want to visualize -** Select that trace (check box), select the trace type (e.g. CTF: Kernel Trace), and press "Finish" ** The newly imported trace should appear under the Traces folder * Visualize the trace ** Expand the Traces folder @@ -189,7 +188,19 @@ A new project will appear in the '''Project Explorer''' view. Tracing projects have two sub-folders: '''Traces''' which holds the individual traces, and '''Experiments''' which holds sets of traces that we want to correlate. === Importing Traces in a Project === + +==== Open Trace File, Open Trace Directory ==== + +To open a single trace, right-click on the Traces folder and select '''Open Trace File...''' (for logs and such) or '''Open Trace directory...''' (for CTF traces). + +[[Image:images/OpenTraceFile.png]] + +Select the file or directory, and the trace will be imported into the selected Traces folder. It will attempt to auto-detect the trace type. If the trace validates as more than one trace type, a window will prompt the user to select a trace type. Once a trace type is selected, the trace will load. + +Note that a trace type is an extension point of the '''Tracing and Monitoring Framework (TMF)'''. Depending on the which features are loaded, the list of available trace types can vary. + ==== Batch Importing ==== + The '''Batch Import Trace Wizard''' allows users to search their media for traces and import multiple traces of varying trace types simultaneously. It also handles name clashes and renaming of traces. The '''Traces''' folder holds the set of traces available for a tracing project. To import a set of traces to the '''Traces''' folder, one can open the '''Import...''' menu from the '''File''' main menu. @@ -267,21 +278,59 @@ You will then see the traces in the '''Traces''' folder as shown below and can ' [[Image:images/importImages/importFinish.png]] +=== Trace Package Exporting and Importing === + +A trace package is an archive file that contains the trace itself and can also contain its bookmarks and its supplementary files. Including supplementary files in the package can improve performance of opening an imported trace but at the expense of package size. + +==== Exporting ==== + +The '''Export Trace Package Wizard''' allows users to select a trace and export its files and bookmarks to an archive on a media. + +The '''Traces''' folder holds the set of traces available for a tracing project. To export a trace contained in the '''Traces''' folder, one can open the '''Export...''' menu from the '''File''' main menu. Then select '''Trace Package Export''' + +[[Image:images/tracePackageImages/fileExport.png]] + +At this point, the '''Trace Package Export''' is opened. The project containing the trace has to be selected first then the trace to be exported. + +[[Image:images/tracePackageImages/chooseTrace.png]] + +One can also open the wizard and skip the first page by selecting a trace in the '''Traces''' folder by double clicking on the project name, double clicking on the '''Traces''' folder, right-clicking on the trace then selecting '''Export Trace Package...''' menu item in the context-sensitive menu. + +[[Image:images/tracePackageImages/exportSelectedTrace.png]] + +Next, the user can choose the content to export and various format options for the resulting file. + +[[Image:images/tracePackageImages/exportPackage.png]] + +The '''Trace''' item is always selected and represents the files that constitute the trace. The '''Supplementary files''' items represent files that are typically generated when a trace is opened by the viewer. Sharing these files can speed up opening a trace dramatically but also increases the size of the exported archive file. The ''Size'' column can help to decide whether or not to include these files. Lastly, by selecting '''Bookmarks''', the user can export all the bookmarks so that they can be shared along with the trace. + +The '''To archive file''' field is used to specify the location where to save the resulting archive. + +The '''Options''' section allows the user to choose between a tar archive or a zip archive. Compression can also be toggled on or off. + +When Finish button is clicked, the package is generated and saved to the media. + ==== Importing ==== -The previous way of importing a trace is still available. To access it, simply select '''Import...''' menu item in the context-sensitive menu. +The '''Import Trace Package Wizard''' allows users to select a previously exported trace package from their media and import the content of the package in the workspace. + +The '''Traces''' folder holds the set of traces for a tracing project. To import a trace package to the '''Traces''' folder, one can open the '''Import...''' menu from the '''File''' main menu. Then select '''Trace Package Import'''. + +[[Image:images/tracePackageImages/fileImport.png]] + +One can also open the wizard by double clicking on the project name, right-clicking on the '''Traces''' folder then selecting '''Import Trace Package...''' menu item in the context-sensitive menu. -[[Image:images/ProjectImportTraceAction.png]] +[[Image:images/tracePackageImages/importTraceFolder.png]] -A new display will show for selecting traces to import. By default, it shows the correct destination directory where the traces will be imported to. Now, specify the location of the traces by entering the path directly in the '''Source Directory''' or by browsing the file system (click on button browse). Then select the traces to import in the list of files and folders. Optionally, select the '''Trace Type''' from the drop-down menu, select or deselect the checkboxes for '''Overwrite existing trace without warning''' and '''Create links into workspace'''. When all options are configured, click on '''Finish'''. +At this point, the '''Trace Package Import Wizard''' is opened. -Note, that traces of certain types (e.g. LTTng Kernel) are actually a composite of multiple channel traces grouped under a folder. It is the folder that has to be imported. +[[Image:images/tracePackageImages/importPackage.png]] -[[Image:images/ProjectImportTraceDialog.png]] +The '''From archive file''' field is used to specify the location of the trace package to export. The user can choose the content to import in the tree. -Upon successful importing the traces will be stored in the '''Traces''' folder. If a trace type was selected in the import dialog, then the corresponding icon will be displayed. If no trace type is selected the unknown icon [[Image:images/unknown_parser.gif]] will be displayed. Linked traces will have a little arrow as decorator on the right bottom corner. +If the wizard was opened using the File menu, the destination project has to be selected in the '''Into project''' field. -Note that trace type is an extension point of the '''Tracing and Monitoring Framework (TMF)'''. Depending on the which features are loaded, the list of trace types can vary. +When Finish is clicked, the trace is imported under the project's Trace folder. === Selecting a Trace Type === @@ -517,36 +566,57 @@ If a source file is available in the trace for the selected event, the item '''O If an EMF model URI is available in the trace for the selected event, the item '''Open Model Element''' is shown in the context menu. Selecting this menu item will attempt to open the model file in the project specified in the URI. The model file will be opened in its default model editor. If the model file is not found, an error dialog is shown displaying the URI information. +=== Exporting To Text === +It is possible to export the content of the trace to a text file based on the columns displayed in the events table. If a filter (see '''[[#Filtering| Filtering]]''') was defined prior exporting only events that match the filter will be exported to the file. To export the trace to text, press the right mouse button on the events table. A context-sensitive menu will show. Select the '''Export To Text...''' menu option. A file locater dialog will open. Fill in the file name and location and then press on '''OK'''. A window with a progress bar will open till the export is finished. + +''Note'': The columns in the text file are separated by tabs. + == Histogram View == The Histogram View displays the trace events distribution with respect to time. When streaming a trace, this view is dynamically updated as the events are received. - [[Image:images/HistogramView.png]] +The '''Hide Lost Events''' toggle button [[Image:images/hide_lost_events.gif]] in the local toolbar allows to hide the bars of lost events. When the button is selected it can be toggled again to show the lost events. + +On the top left, there are three text controls: + +* '''Selection Start''': Displays the start time of the current selection +* '''Selection End''': Displays the end time of the current selection +* '''Window Span''': Displays the current zoom window size in seconds + +The controls can be used to modify their respective value. After validation, the other controls and views will be synchronized and updated accordingly. To modify both selection times simultaneously, press the link icon [[Image:images/link.gif]] which disables the '''Selection End''' control input. + +The large (full) histogram, at the bottom, shows the event distribution over the whole trace or set of traces. It also has a smaller semi-transparent orange window, with a cross-hair, that shows the current zoom window. -On the top left, there are two data controls: +The smaller (zoom) histogram, on top right, corresponds to the current zoom window, a sub-range of the event set. -* '''Current Event (sec)''': Displays the current time or selected time range begin time -* '''Window Span (sec)''': Displays the current time range window size +The x-axis of each histogram corresponds to the event timestamps. The start time and end time of the histogram range is displayed. The y-axis shows the maximum number of events in the corresponding histogram bars. -Both control can be used to modify their respective value. After validation, the other controls and views will be synchronized and updated accordingly. +The vertical blue line(s) show the current selection time (or range). If applicable, the region in the selection range will be shaded. -The large histogram, at the bottom, shows the event distribution over the whole trace or set of traces. It also has a smaller semi-transparent window, with a cross-hair, that shows the currently selected time range window. The time range window can be zoomed in/out by using the mouse wheel. It can also be selected by the mouse and dragged to another region of the trace. +The mouse can be used to control the histogram: -The smaller histogram, on top right, corresponds to the currently selected time range window, a sub-range of the event set. Its size can also be zoomed in/out using the mouse wheel. +* '''Left-click''': Set a selection time +* '''Left-drag''': Set a selection range +* '''Shift-left-click or drag''': Extend or shrink the selection range -The x-axis of each histogram corresponds to the events timestamps. The timestamp of the first and the last event of the respective ranges is displayed. The y-axis of each histogram shows the minimum/maximum number of events in the corresponding histogram bars. +* '''Middle-click or Ctrl-left-click''': Center the zoom window on mouse (full histogram only) +* '''Middle-drag or Ctrl-left-drag''': Move the zoom window -The dashed vertical magenta bar, on the right, shows the position of the last event. The vertical blue bar shows the currently selected time. The current time can be changed by clicking on the histogram. Shift-clicking the histogram will select a time range, in which case there will be vertical blue bars at the begin and end time and the region in between will be shaded. +* '''Right-drag''': Set the zoom window +* '''Shift-right-click or drag''': Extend or shrink the zoom window (full histogram only) -Hovering the mouse over an histogram bar pops up an information window that displays the start/end time of the corresponding bar as well as the number of events it represents. +* '''Mouse wheel up''': Zoom in +* '''Mouse wheel down''': Zoom out + +Hovering the mouse over an histogram bar pops up an information window that displays the start/end time of the corresponding bar, as well as the number of events (and lost events) it represents. If the mouse is over the selection range, the selection span in seconds is displayed. In each histogram, the following keys are handled: -* '''Left''': Moves the current event to the previous non-empty bar -* '''Right''': Moves the current event to the next non-empty bar -* '''Home''': Sets the current time to the first histogram bar +* '''Left Arrow''': Moves the current event to the previous non-empty bar +* '''Right Arrow''': Moves the current event to the next non-empty bar +* '''Home''': Sets the current time to the first non-empty bar * '''End''': Sets the current time to the last non-empty histogram bar == Statistics View == @@ -648,6 +718,30 @@ Double-clicking on a call stack event will zoom the time graph to the selected f Clicking the '''Select Next Event''' or '''Select Previous Event''' or using the left and right arrows will navigate to the next or previous call stack event, and select the function currently at the top of the call stack. +Clicking the '''Import Mapping File''' ([[Image:images/import.gif]]) icon will open a file selection dialog, allowing you to import a text file containing mappings from function addresses to function names. If the callstack provider for the current trace type only provides function addresses, a mapping file will be required to get the function names in the view. See the following sections for an example with LTTng-UST traces. + +=== Using the Callstack View with LTTng-UST traces === + +There is support in the LTTng-UST integration plugin to display the callstack of applications traced with the ''liblttng-ust-cyg-profile.so'' library (see the ''liblttng-ust-cyg-profile'' man page for additional information). To do so, you need to: + +* Recompile your application with "''-g -finstrument-functions''". +* Add the ''vtid'' and ''procname'' contexts to your trace session. See the [[#Adding Contexts to Channels and Events of a Domain | Adding Contexts to Channels and Events of a Domain]] section. Or if using the command-line: +**
lttng add-context -u -t vtid -t procname+* Preload the ''liblttng-ust-cyg-profile'' library when running your program: +**
LD_PRELOAD=/usr/lib/liblttng-ust-cyg-profile.so ./myprogram+ +Once you load the resulting trace, making sure it's set to the ''Common Trace Format - LTTng UST Trace'' type, the Callstack View should be populated with the relevant information. However, since GCC's cyg-profile instrumentation only provides function addresses, and not names, an additional step is required to get the function names showing in the view. The following section explains how to do so. + +=== Importing a function name mapping file for LTTng-UST traces === + +If you followed the steps in the previous section, you should have a Callstack View populated with function entries and exits. However, the view will display the function addresses instead of names in the intervals, which are not very useful by themselves. To get the actual function names, you need to: + +* Generate a mapping file from the binary, using: +**
nm myprogram > mapping.txt+* Click the '''Import Mapping File''' ([[Image:images/import.gif]]) button in the Callstack View, and select the ''mapping.txt'' file that was just created. + +The view should now update to display the function names instead. Make sure the binary used for taking the trace is the one used for this step too (otherwise, there is a good chance of the addresses not being the same). + == Custom Parsers == Custom parser wizards allow the user to define their own parsers for text or XML traces. The user defines how the input should be parsed into internal trace events and identifies the event fields that should be created and displayed. Traces created using a custom parser can be correlated with other built-in traces or traces added by plug-in extension. @@ -938,6 +1032,15 @@ The text field '''Trace Path''' allows for specifying the path relative to the l To create a session with advanced options, fill in the relevant parameters and press '''Ok'''. Upon successful operation a new session will be created and added under the tree node '''Sessions'''. +==== Creating a Snapshot Tracing Session ==== +LTTng Tools version v2.3.0 introduces the possibility to create snapshot tracing sessions. After starting tracing the trace events are not stored on disk or over the network. They are only transfered to disk or over the network when the user records a snapshot. To create such a snapshot session, open the trace session dialog as described in chapter [[#Creating a Tracing Session | Creating a Tracing Session]]. + +[[Image:images/LTTng2CreateSessionDialog_Snapshot.png]] + +Fill in all necessary information, select checkbox for '''Snapshot Mode''' and press '''Ok'''. By default, the location for the snapshot output will be on the host where the host is located. + +Refer to chapter [[#Recording a Snapshot | Recording a Snapshot]] for how to create a snapshot. + ==== Enabling Channels - General ==== Enabling channels can be done using a session tree node when the domain hasn't be created in the session or, alternatively on a domain tree node of a session in case the domain is already available. @@ -957,34 +1060,39 @@ By default the domain '''Kernel''' is selected. To create a UST channel, select If required update the following channel information and then press '''Ok'''. * '''Channel Name''': The name of the channel. -* '''Number of Sub Buffers''': The number of sub-buffers of the channel. -* '''Overwrite Mode''': The channel overwrite mode ('''true''' or '''false''') -* '''Read Timer Interval''': The read timer interval. * '''Sub Buffer size''': The size of the sub-buffers of the channel (in bytes). +* '''Number of Sub Buffers''': The number of sub-buffers of the channel. * '''Switch Timer Interval''': The switch timer interval. +* '''Read Timer Interval''': The read timer interval. +* '''Discard Mode''': '''Overwrite''' events in buffer or '''Discard''' new events when buffer is full. Upon successful operation, the requested domain will be created under the session tree node as well as the requested channel will be added under the domain. The channel will be '''ENABLED'''. -==== Trace file rotation ==== +==== Configuring Trace File Rotation ==== -Since LTTng Tools v2.2.0 it is possible to set the maximum size of trace files and the maximum number of them. These options are located in the same dialog box that is used to enabling channels. +Since LTTng Tools v2.2.0 it is possible to set the maximum size of trace files and the maximum number of them. These options are located in the same dialog box that is used for enabling channels. [[Image:images/LTTng2CreateChannelDialogFileRotation.png]] * '''Maximum size of trace files''': The maximum size of trace files * '''Maximum number of trace files''': The maximum number of trace files -==== Per UID buffers ==== +==== Configuring per UID and per PID Buffers (UST only) ==== -Since LTTng Tools v2.2.0 it is possible to have one buffer per UID for UST traces. It can be activated in the dialog box when enabling channels. +Since LTTng Tools v2.2.0 it is possible to configure the type of buffers for '''UST''' application. It is now possible to choose between per '''UID''' buffers (per user ID) and per '''PID''' buffers (per process ID) using the dialog box for enabling channels. [[Image:images/LTTng2CreateChannelDialogPerUIDBuffers.png]] -* '''Per UID buffers''': To activate the per UID buffers option for UST channel only +* '''Per PID buffers''': To activate the per PID buffers option for UST channels +* '''Per UID buffers''': To activate the per UID buffers option for UST channels -==== Periodical flush for metadata ==== +If no buffer type is selected then the default value of the tracer will be configured. -Since LTTng Tools v2.2.0 it is possible to configure periodical flush for the metadata channel. To set this, use the checkbox '''Configure metadata channel''' then use the switcher timer interval for the interval. +Note that '''Global shared buffers''' is only for kernel channel and is pre-selected when '''Kernel''' is selected in the dalog box. + +==== Configuring Periodical Flush for metadata Channel ==== + +Since LTTng Tools v2.2.0 it is possible to configure periodical flush for the metadata channel. To set this, use the checkbox '''Configure metadata channel''' then fill the switch timer interval. [[Image:images/LTTng2CreateChannelDialogMetadataFlush.png]] @@ -994,11 +1102,7 @@ Once a domain is available, channels can be enabled directly using the domain. T [[Image:images/LTTng2CreateChannelOnDomainAction.png]] -The dialog box for enabling channel will open for entering information about the channel to be created. Note that the domain is pre-selected and cannot be changed. - -[[Image:images/LTTng2CreateChannelOnDomainDialog.png]] - -Fill the relevant information and press '''Ok'''. +The dialog box for enabling channel will open for entering information about the channel to be created. Note that the domain is pre-selected and cannot be changed. Fill the relevant information and press '''Ok'''. ==== Enabling and Disabling Channels ==== @@ -1182,9 +1286,9 @@ Adding contexts on channels and events from the channel level, will enable the s A new display will open for selecting one or more contexts to add. Select one or more contexts as described in chapter [[#Adding Contexts to Channels and Events of a Domain | Adding Contexts to Channels and Events of a Domain]]. Upon successful operation, the selected context will be added to all channels and their events of the selected domain. '''Note''' that the LTTng 2.0 tracer control on the remote host doesn't provide a way to retrieve added contexts. Hence it's not possible to display the context information in the GUI. -==== Adding Contexts to a Event of a Specific Channel ==== +==== Adding Contexts to an Event of a Specific Channel ==== -Adding contexts to a event of a channel, select an event of a channel, click right mouse button on the corresponding event tree node and select the menu item '''Add Context...''' from the context-sensitive menu. +Adding contexts to an event of a channel is only available in LTTng Tools versions v2.0.0-2.1.x. The menu option won't be visible for LTTng Tools version v2.2.0 or later. To add contexts on an event select an event of a channel, click right mouse button on the corresponding event tree node and select the menu item '''Add Context...''' from the context-sensitive menu. [[Image:images/LTTng2AddContextToEventsAction.png]] @@ -1198,9 +1302,17 @@ To start tracing, select one or more sessions to start in the Control View and p Upon successful operation, the tracing session will be '''ACTIVE''' and the icon of the session will be updated. +==== Recording a Snapshot ==== + +LTTng Tools version v2.3.0 introduces the possibility to create snapshot tracing sessions. After creating a snapshot session (see [[#Creating a Snapshot Tracing Session | Creating a Snapshot Tracing Session]]) and starting tracing (see [[#Start Tracing | Start Tracing]]) it possible to record snapshots. To record a snapshot select one or more sessions and press the '''Record Snapshot''' button. Alternatively, press the right mouse button on the session tree nodes. A context-sensitive menu will show. Then select the '''Recored Snapshot''' menu item. + +[[Image:images/LTTng2RecordSnapshotAction.png]] + +This action can be executed many times. It is possible to import the recorded snpshots to a tracing project. The trace session might be '''ACTIVE''' or '''INACTIVE''' for that. Refer to section [[#Importing Session Traces to a Tracing Project | Importing Session Traces to a Tracing Project]] on how to import a trace to a tracing project. + ==== Stop Tracing ==== -To stop tracing, select one or more sessions to stop in the Control View and press the '''Stop''' button. Alternatively, click the right mouse button on the session tree nodes. A context-sensitive menu will show. Then select the '''Stop''' menu item. +To stop tracing, select one or more sessions to stop in the Control View and press the '''Stop''' button. Alternatively, click the right mouse button on the session tree node. A context-sensitive menu will show. Then select the '''Stop''' menu item. [[Image:images/LTTng2StopTracingAction.png]] @@ -1245,7 +1357,9 @@ A new display will open for selecting the traces to import. [[Image:images/LTTng2ImportDialog.png]] -Select the trace to be imported by selecting the relevant traces in the tree viewer, select a tracing project from the '''Available Projects''' combo box and select the Overwrite button ('''Overwrite existing trace without warning''') if required. Then press button '''Ok'''. Upon successful import operation the the selected traces will be stored in the '''Traces''' directory of the specified tracing project. From the '''Project Explorer''' view, the trace can be analyzed further. +By default all traces are selected. A default project with the name '''Remote''' is selected which will be created if necessary. Update the list of traces to be imported, if necessary, by selecting and deselecting the relevant traces in the tree viewer. Use buttons '''Select All''' or '''Deselect All''' to select or deselect all traces. Also if needed, change the tracing project from the '''Available Projects''' combo box. Select the Overwrite button ('''Overwrite existing trace without warning''') if required. Then press button '''Ok'''. Upon successful import operation the selected traces will be stored in the '''Traces''' directory of the specified tracing project. For '''Kernel''' traces the trace type '''LTTng Kernel''' and for '''UST''' traces the trace type '''Generic CTF Trace''' will be set. From the '''Project Explorer''' view, the trace can be analyzed further. + +'''Note''': The trace will be imported with a name constructed with information about session, whether it is a kernel or ust trace, ust buffer type (per UID or per PID) and snapshot details. '''Note''': If the overwrite button ('''Overwrite existing trace without warning''') was not selected and a trace with the same name of a trace to be imported already exists in the project, then a new confirmation dialog box will open. @@ -1259,11 +1373,7 @@ If the existing trace should not be overwritten select, then select the '''Renam ==== Importing Network Traces to a Tracing Project ==== -Since LTTng Tools v2.1.0 it is possible to store traces over the network. To import network traces, execute the '''Import''' action as described in chapter [[#Importing Session Traces to a Tracing Project|Importing Session Traces to a Tracing Project]]. For network traces a dialog will open for selecting a project from the list of available tracing projects within the current Eclipse workspace. - -[[Image:images/LTTng2ImportSelectTracingProjectDialog.png]] - -Select a tracing project from the drop-down menu and then click on '''Next...'''. This will open the default dialog box for importing traces to a tracing project. Follow the instructions in chapter [[#Importing Traces in a Project|Importing Traces in a Project]] to import the network traces of the current session. +Since LTTng Tools v2.1.0 it is possible to store traces over the network. To import network traces, execute the '''Import''' action as described in chapter [[#Importing Session Traces to a Tracing Project|Importing Session Traces to a Tracing Project]]. For network traces the '''Batch Import Trace Wizard''' will be displayed. Follow the instructions in chapter [[#Batch Importing|Batch Importing]] to import the network traces of the current session. === Properties View === @@ -1289,10 +1399,14 @@ The Control View provides property information of selected tree component. Depen ** '''Log Level''': The log level of the event. * '''Session''' Properties ** '''Session Name''': The name of the Session. -** '''Session Path''': The path on the remote host where the traces will be stored. +** '''Session Path''': The path on the remote host where the traces will be stored. (Not shown for snapshot sessions). ** '''State''': The state of the session ('''ACTIVE''' or '''INACTIVE''') +** '''Snapshot ID''': The snapshot ID. (Only shown for snapshot sessions). +** '''Snapshot Name''': The name of the snapshot output configuration. (Only shown for snapshot sessions). +** '''Snapshot Path''': The path where the snapshot session is located. (Only shown for snapshot sessions). * '''Domain''' Properties ** '''Domain Name''': The name of the domain. +** '''Buffer Type''': The buffer type of the domain. * '''Channel''' Properties ** '''Channel Name''': The name of the channel. ** '''Number of Sub Buffers''': The number of sub-buffers of the channel. @@ -1351,7 +1465,7 @@ The perspective can be opened from the Eclipse Open Perspective dialog ('''Windo == Control Flow View == -The '''''Control Flow View''''' is a LTTng-specific view that shows per-process events graphically. To enable it, select ''Control Flow'' under ''LTTng'' within the ''Show View'' window ('''Window''' -> '''Show View''' -> '''Other...'''): +The '''''Control Flow''''' view is a LTTng-specific view that shows per-process events graphically. To enable it, select ''Control Flow'' under ''LTTng'' within the ''Show View'' window ('''Window''' -> '''Show View''' -> '''Other...'''): [[Image:images/Cfv_show_view.png]] @@ -1359,11 +1473,11 @@ You should get something like this: [[Image:images/Cfv_global.png]] -The view is divided into the following important sections: '''process tree''', '''process TID, PTID and birth time''', '''states flow''' and the '''toolbar'''. +The view is divided into the following important sections: '''process tree and information''', '''control flow''' and the '''toolbar'''. The following sections provide detailed information for each part of the Control Flow View. -=== Process tree and informations === +=== Process tree and information === Processes are organized as a tree within this view. This way, child and parent processes are easy to identify. @@ -1371,11 +1485,11 @@ Processes are organized as a tree within this view. This way, child and parent p The layout is based on the states computed from the trace events. -A given process may be shown at different places within the tree since the nodes are '''unique (TID, birth time) couples'''. This means that if process B of parent A dies, you'll still see it in the tree. If process A forks process B again, it will be shown as a different node since it won't have the same birth time (and probably not the same TID). This has the advantage that the tree, once loaded, never changes: horizontal scrolling within the [[#States flow|states flow]] remains possible. +A given process may be shown at different places within the tree since the nodes are '''unique (TID, birth time) couples'''. This means that if process B of parent A dies, you'll still see it in the tree. If process A forks process B again, it will be shown as a different node since it won't have the same birth time (and probably not the same TID). This has the advantage that the tree, once loaded, never changes: horizontal scrolling within the [[#Control flow|control flow]] remains possible. The TID column shows the process node's '''thread ID''' and the PTID column shows its '''parent thread ID''' (nothing is shown if the process has no parent). -=== States flow === +=== Control flow === This part of the Control Flow View is probably the most interesting one. Using the mouse, you can navigate through the trace (go left, right) and zoom on a specific region to inspect its details. @@ -1385,7 +1499,11 @@ The colored bars you see represent '''states''' for the associated process node. This dark yellow is what you'll see most of the time since scheduling puts processes on hold while others run. -The vertical blue line is the '''current selection indicator'''. When a time range is selected, the region between the begin and end time of the selection will be shaded. +The vertical blue line with T1 above it is the '''current selection indicator'''. When a time range is selected, the region between the begin and end time of the selection will be shaded and two lines with T1 and T2 above will be displayed. The time stamps corresponding to T1, T2 and their delta are shown in the status line when the mouse is hovering over the control flow. + +Arrows can be displayed that follow the execution of each CPU across processes. The arrows indicate when the scheduler switches from one process to another for a given CPU. The CPU being followed is indicated on the state tooltip. When the scheduler switches to and from the idle process, the arrow skips to the next process which executes on the CPU after the idle process. Note that an appropriate zoom level is required for all arrows to be displayed. + +The display of arrows is optional and can be toggled using the '''Hide Arrows''' toolbar button. It is also possible to follow a CPU's execution across state changes and the scheduler's process switching using the '''Follow CPU Forward/Backward''' toolbar buttons. ==== Using the mouse ==== @@ -1435,6 +1553,8 @@ The tooltip indicates: * the process name * the pointed state name +* the CPU (if applicable) +* the system call name (if applicable) * the pointed state date and start/stop times * the pointed state duration (seconds) @@ -1442,17 +1562,58 @@ The tooltip indicates: The Control Flow View '''toolbar''', located at the top right of the view, has shortcut buttons to perform common actions: -[[Image:images/Cfv_toolbar.png]] - -The '''Previous event''' and '''Next event''' buttons update the current time indicator so that it's on the previous or next event. - -The '''Previous process''' and '''Next process''' buttons select the previous and next process node within the process tree. - -The '''Process filter''' buttons opens a new dialog box for configuring the processes to show. - -[[Image:images/LTTng2_CFV_Filter.png]] +{| +| [[Image:images/filter_items.gif]] +| Show View Filter +| Opens the process filter dialog +|- +| [[Image:images/show_legend.gif]] +| Show Legend +| Displays the states legend +|- +| [[Image:images/home_nav.gif]] +| Reset the Time Scale to Default +| Resets the zoom window to the full range +|- +| [[Image:images/prev_event.gif]] +| Select Previous Event +| Selects the previous state for the selected process +|- +| [[Image:images/next_event.gif]] +| Select Next Event +| Selects the next state for the selected process +|- +| [[Image:images/prev_menu.gif]] +| Select Previous Process +| Selects the previous process +|- +| [[Image:images/next_menu.gif]] +| Select Next Process +| Selects the next process +|- +| [[Image:images/zoomin_nav.gif]] +| Zoom In +| Zooms in on the selection by 50% +|- +| [[Image:images/zoomout_nav.gif]] +| Zoom Out +| Zooms out on the selection by 50% +|- +| [[Image:images/hide_arrows.gif]] +| Hide Arrows +| Toggles the display of arrows on or off +|- +| [[Image:images/follow_arrow_bwd.gif]] +| Follow CPU Backward +| Selects the previous state following CPU execution across processes +|- +| [[Image:images/follow_arrow_fwd.gif]] +| Follow CPU Forward +| Selects the next state following CPU execution across processes +|} == Resources View == + This view is specific to kernel trace. To open it, go in '''Window''' -> '''Show View''' -> '''Other...''' and select '''LTTng/Resources''' in the list. [[Image:images/Rv_example.png| Example of resources view with all trace points and syscalls enabled]] @@ -1488,11 +1649,39 @@ See Control Flow View's '''[[#Incomplete_regions|Incomplete regions]]'''. The Resources View '''toolbar''', located at the top right of the view, has shortcut buttons to perform common actions: -[[Image:images/Rv_toolbar.png]] - -The '''Previous event''' and '''Next event''' buttons update the current time indicator so that it's on the previous or next event. - -The '''Previous resource''' and '''Next resource''' buttons select the previous and next resource node within the resource tree. +{| +| [[Image:images/show_legend.gif]] +| Show Legend +| Displays the states legend +|- +| [[Image:images/home_nav.gif]] +| Reset the Time Scale to Default +| Resets the zoom window to the full range +|- +| [[Image:images/prev_event.gif]] +| Select Previous Event +| Selects the previous state for the selected resource +|- +| [[Image:images/next_event.gif]] +| Select Next Event +| Selects the next state for the selected resource +|- +| [[Image:images/prev_menu.gif]] +| Select Previous Resource +| Selects the previous resource +|- +| [[Image:images/next_menu.gif]] +| Select Next Resource +| Selects the next resource +|- +| [[Image:images/zoomin_nav.gif]] +| Zoom In +| Zooms in on the selection by 50% +|- +| [[Image:images/zoomout_nav.gif]] +| Zoom Out +| Zooms out on the selection by 50% +|} == LTTng Kernel Events Editor == @@ -1506,6 +1695,90 @@ The LTTng Kernel Events editor '''is''' the plain TMF [[#Events_Editor | Events [[Image:images/LTTng2EventsEditor.png]] += Trace synchronization = + +It is possible to synchronize traces from different machines so that they have the same time reference. Events from the reference trace will have the same timestamps as usual, but the events from traces synchronized with the first one will have their timestamps transformed according to the formula obtained after synchronization. + +== Obtain synchronizable traces == + +To synchronize traces from different machines, they need to exchange packets through the network and have events enabled such that the data can be matched from one trace to the other. For now, only TCP packets can be matched between two traces. + +LTTng traces that can be synchronized are obtained using one of two methods (both methods are compatible): + +=== LTTng-module network tracepoint with complete data === + +The tracepoints '''net_dev_queue''' and '''netif_receive_skb''' will be used for synchronization. Both tracepoints are available in lttng-modules since version 2.2, but they do not contain sufficient data to be used to synchronize traces. + +An experimental branch introduces this extra data: lttng-modules will need to be compiled by hand. + +Obtain the source code for the experimental lttng-modules + + # git clone git://git.dorsal.polymtl.ca/~gbastien/lttng-modules.git + # cd lttng-modules + +Checkout the ''net_data_experimental'' branch, compile and install lttng-modules as per the lttng-modules documentation + + # git checkout net_data_experimental + # make + # sudo make modules_install + # sudo depmod -a + +This experimental branch adds IP, IPv6 and TCP header data to the tracepoints. Packets received and sent with other protocols do not have this extra header data, but all packets are captured. + +=== LTTng-modules addons kernel module with dynamic tracepoints === + +This method adds dynamic instrumentation on TCP packets via extra kernel modules. Only TCP packets are captured. + +Obtain the source code, along with lttng-modules + + # git clone https://github.com/giraldeau/lttng-modules.git + # cd lttng-modules + +Checkout the addons branch, compile and install lttng-modules as per the lttng-modules documentation. The ''make'' command will fail at first with a message about the unset SYSMAP variable. Instructions on how to generate a System.map are mentioned in the error message. + + # git checkout addons + # make + # (follow the instructions to obtain the System.map file and set the SYSMAP variable) + # make + # sudo make modules_install + # sudo depmod -a + +The lttng-addons modules must be inserted manually for the TCP tracepoints to be made available. + + # sudo modprobe lttng-addons + # sudo modprobe lttng-probe-addons + +The following tracepoints will be available + + # sudo lttng list -k + Kernel events: + ------------- + ... + inet_sock_create (loglevel: TRACE_EMERG (0)) (type: tracepoint) + inet_sock_delete (loglevel: TRACE_EMERG (0)) (type: tracepoint) + inet_sock_clone (loglevel: TRACE_EMERG (0)) (type: tracepoint) + inet_accept (loglevel: TRACE_EMERG (0)) (type: tracepoint) + inet_connect (loglevel: TRACE_EMERG (0)) (type: tracepoint) + inet_sock_local_in (loglevel: TRACE_EMERG (0)) (type: tracepoint) + inet_sock_local_out (loglevel: TRACE_EMERG (0)) (type: tracepoint) + ... + +The ones used for trace synchronization are '''inet_sock_local_in''' and '''inet_sock_local_out'''. + +== Synchronize traces in TMF == + +In order to synchronize traces, create a new experiment and select all traces that need to be synchronized. Right-click on the experiment and select '''Synchronize traces'''. For each trace whose time needs to be transformed, a new trace named as the original but followed by a '_' will be created with the transformed timestamps, and the original trace will be replaced in the experiment. The original trace can still be accessed under the '''Traces''' folder. + +[[Image:images/Sync_menu.png| Right-click synchronize traces to perform the trace synchronization]] + +When opening the experiment now, all the views will be synchronized. The following screenshot presents the differences in the filtered Control Flow View before and after the time synchronization. + +[[Image:images/Sync_cfv.png| Example of Control Flow View before and after trace synchronization]] + +Information on the quality of the synchronization, the timestamp transformation formula and some synchronization statistics can be visualized in the '''Synchronization''' view. To open the '''Synchronization''' view, use the Eclipse Show View dialog ('''Window''' -> '''Show View''' -> '''Other...'''). Then select '''Synchronization''' under '''Tracing'''. + +[[Image:images/Sync_view.png| Example of Synchronization view]] + = Timestamp formatting = Most views that show timestamps are displayed in the same time format. The unified timestamp format can be changed in the Preferences page. To get to that page, click on '''Window''' -> '''Preferences''' -> '''Tracing''' -> '''Time Format'''. Then a window will show the time format preferences.