X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=sim%2Fcommon%2Faclocal.m4;h=18ba297b05a884b7d600d7604206923a23bcb237;hb=5fd104addfddb68844fb8df67be832ee98ad9888;hp=301c5ec65cb9a1474191c60422865c575c1a276f;hpb=f2de7dfd8cf1ffd6edc7ed650e709c7fa4488da1;p=deliverable%2Fbinutils-gdb.git diff --git a/sim/common/aclocal.m4 b/sim/common/aclocal.m4 index 301c5ec65c..18ba297b05 100644 --- a/sim/common/aclocal.m4 +++ b/sim/common/aclocal.m4 @@ -1,286 +1,15 @@ -# This file contains common code used by all simulators. -# -# SIM_AC_COMMON invokes AC macros used by all simulators and by the common -# directory. It is intended to be invoked before any target specific stuff. -# SIM_AC_OUTPUT is a cover function to AC_OUTPUT to generate the Makefile. -# It is intended to be invoked last. -# -# The simulator's configure.in should look like: -# -# dnl Process this file with autoconf to produce a configure script. -# sinclude(../common/aclocal.m4) -# AC_PREREQ(2.5)dnl -# AC_INIT(Makefile.in) -# -# SIM_AC_COMMON -# -# ... target specific stuff ... -# -# SIM_AC_OUTPUT +# generated automatically by aclocal 1.15.1 -*- Autoconf -*- -AC_DEFUN(SIM_AC_COMMON, -[ -# autoconf.info says this should be called right after AC_INIT. -AC_CONFIG_HEADER(config.h:config.in) +# Copyright (C) 1996-2017 Free Software Foundation, Inc. -AC_CONFIG_AUX_DIR(`cd $srcdir;pwd`/../..) -AC_CANONICAL_SYSTEM -AC_ARG_PROGRAM -AC_PROG_CC -AC_PROG_INSTALL +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. -# Put a plausible default for CC_FOR_BUILD in Makefile. -AC_C_CROSS -if test "x$cross_compiling" = "xno"; then - CC_FOR_BUILD='$(CC)' -else - CC_FOR_BUILD=gcc -fi -AC_SUBST(CC_FOR_BUILD) +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. -AC_SUBST(CFLAGS) -AC_SUBST(HDEFINES) -AR=${AR-ar} -AC_SUBST(AR) -AC_PROG_RANLIB - -. ${srcdir}/../../bfd/configure.host - -dnl Standard simulator options. -dnl Eventually all simulators will support these. -dnl Do not add any here that cannot be supported by all simulators. -dnl Do not add similar but different options to a particular simulator, -dnl all shall eventually behave the same way. - - -dnl This is a generic option to enable special byte swapping -dnl insns on *any* cpu. -AC_ARG_ENABLE(sim-bswap, -[ --enable-sim-bswap Use Host specific BSWAP instruction.], -[case "${enableval}" in - yes) sim_bswap="-DWITH_BSWAP=1 -DUSE_BSWAP";; - no) sim_bswap="-DWITH_BSWAP=0";; - *) AC_MSG_ERROR("--enable-sim-bswap does not take a value"); sim_bswap="";; -esac -if test x"$silent" != x"yes" && test x"$sim_bswap" != x""; then - echo "Setting bswap flags = $sim_bswap" 6>&1 -fi],[sim_bswap=""])dnl -AC_SUBST(sim_bswap) - - -AC_ARG_ENABLE(sim-cflags, -[ --enable-sim-cflags=opts Extra CFLAGS for use in building simulator], -[case "${enableval}" in - yes) sim_cflags="-O2";; - trace) AC_MSG_ERROR("Please use --enable-sim-debug instead."); sim_cflags="";; - no) sim_cflags="";; - *) sim_cflags=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_cflags" != x""; then - echo "Setting sim cflags = $sim_cflags" 6>&1 -fi],[sim_cflags=""])dnl -AC_SUBST(sim_cflags) - - -dnl --enable-sim-debug is for developers of the simulator -dnl the allowable values are work-in-progress -AC_ARG_ENABLE(sim-debug, -[ --enable-sim-debug=opts Enable debugging flags], -[case "${enableval}" in - yes) sim_debug="-DDEBUG=7";; - no) sim_debug="-DDEBUG=0";; - *) sim_debug="-DDEBUG='(${enableval})'";; -esac -if test x"$silent" != x"yes" && test x"$sim_debug" != x""; then - echo "Setting sim debug = $sim_debug" 6>&1 -fi],[sim_debug=""])dnl -AC_SUBST(sim_debug) - - -dnl --enable-sim-trace is for users of the simulator -dnl the allowable values are work-in-progress -AC_ARG_ENABLE(sim-trace, -[ --enable-sim-trace=opts Enable tracing flags], -[case "${enableval}" in - yes) sim_trace="-DTRACE=1";; - no) sim_trace="-DTRACE=0";; - *) sim_trace="-DTRACE='(${enableval})'";; -esac -if test x"$silent" != x"yes" && test x"$sim_trace" != x""; then - echo "Setting sim trace = $sim_trace" 6>&1 -fi],[sim_trace=""])dnl -AC_SUBST(sim_trace) - - -dnl These are available to append to as desired. -sim_link_files= -sim_link_links= - -dnl Create tconfig.h either from simulator's tconfig.in or default one -dnl in common. -sim_link_links=tconfig.h -if test -f ${srcdir}/tconfig.in -then - sim_link_files=tconfig.in -else - sim_link_files=../common/tconfig.in -fi - -# targ-vals.def points to the libc macro description file. -case "${target}" in -*-*-*) TARG_VALS_DEF=../common/nltvals.def ;; -esac -sim_link_files="${sim_link_files} ${TARG_VALS_DEF}" -sim_link_links="${sim_link_links} targ-vals.def" - -]) dnl End of SIM_AC_COMMON - - -dnl Almost standard simulator options. -dnl Eventually all simulators will support these. - - -dnl --enable-sim-endian={yes,no,big,little} is for simulators -dnl that support both big and little endian targets. -AC_DEFUN(SIM_AC_OPTION_ENDIAN, -[ -default_sim_endian="ifelse([$1],,,-DWITH_TARGET_BYTE_ORDER=[$1])" -AC_ARG_ENABLE(sim-endian, -[ --enable-sim-endian=endian Specify target byte endian orientation.], -[case "${enableval}" in - yes) case "$target" in - *powerpc-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - *powerpcle-*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; - *) echo "Unknown target $target" 1>&6; sim_endian="-DWITH_TARGET_BYTE_ORDER=0";; - esac;; - no) sim_endian="-DWITH_TARGET_BYTE_ORDER=0";; - b*|B*) sim_endian="-DWITH_TARGET_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_endian="-DWITH_TARGET_BYTE_ORDER=LITTLE_ENDIAN";; - *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-endian"); sim_endian="";; -esac -if test x"$silent" != x"yes" && test x"$sim_endian" != x""; then - echo "Setting endian flags = $sim_endian" 6>&1 -fi],[sim_endian="${default_sim_endian}"])dnl -]) - - -dnl --enable-sim-hostendian is for users of the simulator when -dnl they find that AC_C_BIGENDIAN does not function correctly -dnl (for instance in a canadian cross) -AC_DEFUN(SIM_AC_OPTION_HOSTENDIAN, -[ -AC_ARG_ENABLE(sim-hostendian, -[ --enable-sim-hostendain=end Specify host byte endian orientation.], -[case "${enableval}" in - no) sim_hostendian="-DWITH_HOST_BYTE_ORDER=0";; - b*|B*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN";; - l*|L*) sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN";; - *) AC_MSG_ERROR("Unknown value $enableval for --enable-sim-hostendian"); sim_hostendian="";; -esac -if test x"$silent" != x"yes" && test x"$sim_hostendian" != x""; then - echo "Setting hostendian flags = $sim_hostendian" 6>&1 -fi],[ -if test "x$cross_compiling" = "xno"; then - AC_C_BIGENDIAN - if test $ac_cv_c_bigendian = yes; then - sim_hostendian="-DWITH_HOST_BYTE_ORDER=BIG_ENDIAN" - else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=LITTLE_ENDIAN" - fi -else - sim_hostendian="-DWITH_HOST_BYTE_ORDER=0" -fi])dnl -]) - - -dnl --enable-sim-inline is for users that wish to ramp up the simulator's -dnl performance by inlining functions. -AC_DEFUN(SIM_AC_OPTION_INLINE, -[ -default_sim_inline="ifelse([$1],,,-DDEFAULT_INLINE=[$1])" -AC_ARG_ENABLE(sim-inline, -[ --enable-sim-inline=inlines Specify which functions should be inlined.], -[sim_inline="" -case "$enableval" in - no) sim_inline="-DDEFAULT_INLINE=0";; - 0) sim_inline="-DDEFAULT_INLINE=0";; - yes | 2) sim_inline="-DDEFAULT_INLINE=ALL_INLINE";; - 1) sim_inline="-DDEFAULT_INLINE=INLINE_LOCALS";; - *) for x in `echo "$enableval" | sed -e "s/,/ /g"`; do - new_flag="" - case "$x" in - *_INLINE=*) new_flag="-D$x";; - *=*) new_flag=`echo "$x" | sed -e "s/=/_INLINE=/" -e "s/^/-D/"`;; - *_INLINE) new_flag="-D$x=ALL_INLINE";; - *) new_flag="-D$x""_INLINE=ALL_INLINE";; - esac - if test x"$sim_inline" = x""; then - sim_inline="$new_flag" - else - sim_inline="$sim_inline $new_flag" - fi - done;; -esac -if test x"$silent" != x"yes" && test x"$sim_inline" != x""; then - echo "Setting inline flags = $sim_inline" 6>&1 -fi],[if test x"$GCC" != "x" -a x"${default_sim_inline}" != "x" ; then - sim_inline="${default_sim_inline}" - if test x"$silent" != x"yes"; then - echo "Setting inline flags = $sim_inline" 6>&1 - fi -else - sim_inline="" -fi])dnl -]) - - -dnl --enable-sim-warnings is for developers of the simulator. -dnl it enables extra GCC specific warnings. -AC_DEFUN(SIM_AC_OPTION_WARNINGS, -[ -AC_ARG_ENABLE(sim-warnings, -[ --enable-sim-warnings=opts Extra CFLAGS for turning on compiler warnings except for idecode.o, semantics.o and psim.o], -[case "${enableval}" in - yes) sim_warnings="-Werror -Wall -Wpointer-arith -Wmissing-prototypes -Wmissing-declarations ";; - no) sim_warnings="-w";; - *) sim_warnings=`echo "${enableval}" | sed -e "s/,/ /g"`;; -esac -if test x"$silent" != x"yes" && test x"$sim_warnings" != x""; then - echo "Setting warning flags = $sim_warnings" 6>&1 -fi],[sim_warnings=""])dnl -]) - - - - -dnl Generate the Makefile in a target specific directory. -dnl Substitutions aren't performed on the file in AC_SUBST_FILE, -dnl so this is a cover macro to tuck the details away of how we cope. -dnl We cope by having autoconf generate two files and then merge them into -dnl one afterwards. The two pieces of the common fragment are inserted into -dnl the target's fragment at the appropriate points. - -AC_DEFUN(SIM_AC_OUTPUT, -[ -dnl Optional options -AC_SUBST(sim_endian) -AC_SUBST(sim_hostendian) -AC_SUBST(sim_inline) -AC_SUBST(sim_warnings) -dnl -AC_LINK_FILES($sim_link_files, $sim_link_links) -AC_OUTPUT(Makefile.sim:Makefile.in Make-common.sim:../common/Make-common.in, -[case "x$CONFIG_FILES" in xMakefile*) - echo "Merging Makefile.sim+Make-common.sim into Makefile ..." - rm -f Makesim1.tmp Makesim2.tmp Makefile - sed -n -e '/^## COMMON_PRE_/,/^## End COMMON_PRE_/ p' Makesim1.tmp - sed -n -e '/^## COMMON_POST_/,/^## End COMMON_POST_/ p' Makesim2.tmp - sed -e '/^## COMMON_PRE_/ r Makesim1.tmp' \ - -e '/^## COMMON_POST_/ r Makesim2.tmp' \ - Makefile - rm -f Makefile.sim Make-common.sim Makesim1.tmp Makesim2.tmp - ;; - esac - case "x$CONFIG_HEADERS" in xconfig.h:config.in) echo > stamp-h ;; esac -]) -]) +m4_ifndef([AC_CONFIG_MACRO_DIRS], [m4_defun([_AM_CONFIG_MACRO_DIRS], [])m4_defun([AC_CONFIG_MACRO_DIRS], [_AM_CONFIG_MACRO_DIRS($@)])]) +m4_include([acinclude.m4])