X-Git-Url: http://drtracing.org/?a=blobdiff_plain;f=src-release;h=b28597c09d64f883388bb67dbbcdfc6d771cf41d;hb=ee01b6652ad55437e777fb7e6b1745782dc205a4;hp=9b366f1d59dc5c61688ff63e589bc9c8dedba0c9;hpb=25aae7f2b042fec7c42d5d0e76247095db7738f0;p=deliverable%2Fbinutils-gdb.git

diff --git a/src-release b/src-release
index 9b366f1d59..b28597c09d 100644
--- a/src-release
+++ b/src-release
@@ -44,21 +44,20 @@ PWD = $${PWDCMD-pwd}
 # Support for building net releases
 
 # Files in devo used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
-DEVO_SUPPORT= README Makefile.in configure configure.in \
+DEVO_SUPPORT= README Makefile.in configure configure.ac \
 	config.guess config.sub config move-if-change \
 	COPYING COPYING.LIB install-sh config-ml.in symlink-tree \
-	mkinstalldirs ltconfig ltmain.sh missing ylwrap \
-	libtool.m4 gettext.m4 ltcf-c.sh ltcf-cxx.sh ltcf-gcj.sh \
-	Makefile.def Makefile.tpl src-release
+	mkinstalldirs ltmain.sh missing ylwrap \
+	libtool.m4 ltsugar.m4 ltversion.m4 ltoptions.m4 \
+	Makefile.def Makefile.tpl src-release config.rpath \
+	ChangeLog MAINTAINERS README-maintainer-mode \
+	lt~obsolete.m4 ltgcc.m4 depcomp mkdep compile \
+	COPYING3 COPYING3.LIB
 
 # Files in devo/etc used in any net release.
-# ChangeLog omitted because it may refer to files which are not in this
-# distribution (perhaps it would be better to include it anyway).
 ETC_SUPPORT= Makefile.in configure configure.in standards.texi \
 	make-stds.texi standards.info* configure.texi configure.info* \
-	configbuild.* configdev.* fdl.texi texi2pod.pl
+	ChangeLog configbuild.* configdev.* fdl.texi texi2pod.pl gnu-oids.texi
 
 
 # When you use `make setup-dirs' or `make taz' you should always redefine
@@ -68,9 +67,15 @@ SUPPORT_FILES = list-of-support-files-for-tool-in-question
 # NOTE: No double quotes in the below.  It is used within shell script
 # as VER="$(VER)"
 VER = `	if grep 'AM_INIT_AUTOMAKE.*BFD_VERSION' $(TOOL)/configure.in >/dev/null 2>&1; then \
-	  sed < bfd/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+	  bfd/configure --version | sed -n -e '1s,.* ,,p'; \
 	elif grep AM_INIT_AUTOMAKE $(TOOL)/configure.in >/dev/null 2>&1; then \
 	  sed < $(TOOL)/configure.in -n 's/AM_INIT_AUTOMAKE[^,]*, *\([^)]*\))/\1/p'; \
+	elif test -f $(TOOL)/common/create-version.sh; then \
+	  $(TOOL)/common/create-version.sh $(TOOL) \
+	    'dummy-host' 'dummy-target' \
+	    VER.tmp; \
+	  cat VER.tmp | grep 'version\[\]' | sed 's/.*"\([^"]*\)".*/\1/' | sed 's/-cvs$$//'; \
+          rm -f VER.tmp; \
 	elif test -f $(TOOL)/version.in; then \
 	  head -1 $(TOOL)/version.in; \
 	elif grep VERSION $(TOOL)/Makefile.in > /dev/null 2>&1; then \
@@ -144,7 +149,7 @@ do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
 	    CC_FOR_TARGET="$(CC)" CXX_FOR_TARGET="$(CXX)"
 	# Make links, and run "make diststuff" or "make info" when needed.
 	rm -rf proto-toplev ; mkdir proto-toplev
-	set -e ; dirs="$(TOOL) $(DEVO_SUPPORT) $(SUPPORT_FILES)" ; \
+	set -e ; dirs="$(DEVO_SUPPORT) $(SUPPORT_FILES) $(TOOL)" ; \
 	for d in $$dirs ; do \
 	  if [ -d $$d ]; then \
 	    if [ ! -f $$d/Makefile ] ; then true ; \
@@ -160,7 +165,15 @@ do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
 	    else \
 	      ln -s ../$$d proto-toplev/$$d ; \
 	    fi ; \
-	  else ln -s ../$$d proto-toplev/$$d ; fi ; \
+	  else \
+	    if (echo x$$d | grep / >/dev/null); then \
+	      mkdir -p proto-toplev/`dirname $$d` ; \
+	      x=`dirname $$d` ; \
+	      ln -s ../`echo $$x/ | sed -e 's,[^/]*/,../,g'`$$d proto-toplev/$$d ; \
+	    else \
+	      ln -s ../$$d proto-toplev/$$d ; \
+	    fi ; \
+	  fi ; \
 	done
 	cd etc && $(MAKE) MAKEINFOFLAGS="$(MAKEINFOFLAGS)" info
 	$(MAKE) distclean
@@ -184,9 +197,9 @@ do-proto-toplev: $(DEVO_SUPPORT) $(SUPPORT_FILES) texinfo/texinfo.tex
 	 done)
 	#
 	# Take out texinfo from configurable dirs
-	rm proto-toplev/configure.in
+	rm proto-toplev/configure.ac
 	sed -e '/^host_tools=/s/texinfo //' \
-	    <configure.in >proto-toplev/configure.in
+	    <configure.ac >proto-toplev/configure.ac
 	#
 	mkdir proto-toplev/texinfo
 	ln -s ../../texinfo/texinfo.tex		proto-toplev/texinfo/
@@ -250,7 +263,7 @@ gas.tar.bz2: $(DIST_SUPPORT) $(GAS_SUPPORT_DIRS) gas
 
 # The FSF "binutils" release includes gprof and ld.
 .PHONY: binutils.tar.bz2
-BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld gprof intl setup.com makefile.vms mkdep cpu
+BINUTILS_SUPPORT_DIRS= bfd gas include libiberty opcodes ld elfcpp gold gprof intl setup.com makefile.vms cpu
 binutils.tar.bz2: $(DIST_SUPPORT) $(BINUTILS_SUPPORT_DIRS) binutils
 	$(MAKE) -f $(SELF) taz TOOL=binutils \
 		MD5PROG="$(MD5PROG)" \
@@ -270,7 +283,7 @@ gnats.tar.bz2: $(DIST_SUPPORT) $(GNATS_SUPPORT_DIRS) gnats
 		SUPPORT_FILES="$(GNATS_SUPPORT_DIRS)"
 
 .PHONY: gdb.tar.bz2
-GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim
+GDB_SUPPORT_DIRS= bfd include libiberty opcodes readline sim intl libdecnumber cpu
 gdb.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
 	$(MAKE) -f $(SELF) gdb-taz TOOL=gdb \
 		MD5PROG="$(MD5PROG)" \
@@ -281,6 +294,14 @@ gdb.tar: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb
 		MD5PROG="$(MD5PROG)" \
 		SUPPORT_FILES="$(GDB_SUPPORT_DIRS)"
 
+# Corresponding to the CVS "sim" module.
+.PHONY: sim.tar.bz2
+SIM_SUPPORT_DIRS= bfd opcodes libiberty include intl gdb/version.in makefile.vms
+sim.tar.bz2: $(DIST_SUPPORT) $(SIM_SUPPORT_DIRS) sim
+	$(MAKE) -f $(SELF) taz TOOL=sim \
+		MD5PROG="$(MD5PROG)" \
+		SUPPORT_FILES="$(SIM_SUPPORT_DIRS)"
+
 .PHONY: insight.tar.bz2
 INSIGHT_SUPPORT_DIRS= $(GDB_SUPPORT_DIRS) tcl tk itcl libgui
 insight.tar.bz2: $(DIST_SUPPORT) $(GDB_SUPPORT_DIRS) gdb