b43 with open firmware crashes mac80211 because
it changes the number of queues at runtime which,
while it was never really supported, now crashes
mac80211 due to the new hardware queue logic.
Fix this by detecting open vs. proprietary fw
earlier and registering with mac80211 with the
right number of queues.
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Cc: stable@vger.kernel.org (depends on commit a6f38ac3)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
* handler, only. This basically is just the IRQ mask register. */
spinlock_t hardirq_lock;
* handler, only. This basically is just the IRQ mask register. */
spinlock_t hardirq_lock;
- /* The number of queues that were registered with the mac80211 subsystem
- * initially. This is a backup copy of hw->queues in case hw->queues has
- * to be dynamically lowered at runtime (Firmware does not support QoS).
- * hw->queues has to be restored to the original value before unregistering
- * from the mac80211 subsystem. */
- u16 mac80211_initially_registered_queues;
-
/* Set this if we call ieee80211_register_hw() and check if we call
* ieee80211_unregister_hw(). */
bool hw_registred;
/* Set this if we call ieee80211_register_hw() and check if we call
* ieee80211_unregister_hw(). */
bool hw_registred;
+ fw->opensource = (ctx->req_type == B43_FWTYPE_OPENSOURCE);
+
goto out;
start_ieee80211:
goto out;
start_ieee80211:
+ wl->hw->queues = B43_QOS_QUEUE_NUM;
+ if (!modparam_qos || dev->fw.opensource)
+ wl->hw->queues = 1;
+
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
err = ieee80211_register_hw(wl->hw);
if (err)
goto err_one_core_detach;
dev->fw.hdr_format = B43_FW_HDR_410;
else
dev->fw.hdr_format = B43_FW_HDR_351;
dev->fw.hdr_format = B43_FW_HDR_410;
else
dev->fw.hdr_format = B43_FW_HDR_351;
- dev->fw.opensource = (fwdate == 0xFFFF);
+ WARN_ON(dev->fw.opensource != (fwdate == 0xFFFF));
- /* Default to use-all-queues. */
- dev->wl->hw->queues = dev->wl->mac80211_initially_registered_queues;
- dev->qos_enabled = !!modparam_qos;
+ dev->qos_enabled = dev->wl->hw->queues > 1;
/* Default to firmware/hardware crypto acceleration. */
dev->hwcrypto_enabled = true;
/* Default to firmware/hardware crypto acceleration. */
dev->hwcrypto_enabled = true;
/* Disable hardware crypto and fall back to software crypto. */
dev->hwcrypto_enabled = false;
}
/* Disable hardware crypto and fall back to software crypto. */
dev->hwcrypto_enabled = false;
}
- if (!(fwcapa & B43_FWCAPA_QOS)) {
- b43info(dev->wl, "QoS not supported by firmware\n");
- /* Disable QoS. Tweak hw->queues to 1. It will be restored before
- * ieee80211_unregister to make sure the networking core can
- * properly free possible resources. */
- dev->wl->hw->queues = 1;
- dev->qos_enabled = false;
- }
+ /* adding QoS support should use an offline discovery mechanism */
+ WARN(fwcapa & B43_FWCAPA_QOS, "QoS in OpenFW not supported\n");
} else {
b43info(dev->wl, "Loading firmware version %u.%u "
"(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
} else {
b43info(dev->wl, "Loading firmware version %u.%u "
"(20%.2i-%.2i-%.2i %.2i:%.2i:%.2i)\n",
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
- hw->queues = modparam_qos ? B43_QOS_QUEUE_NUM : 1;
- wl->mac80211_initially_registered_queues = hw->queues;
wl->hw_registred = false;
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
wl->hw_registred = false;
hw->max_rates = 2;
SET_IEEE80211_DEV(hw, dev->dev);
B43_WARN_ON(!wl);
if (wl->current_dev == wldev && wl->hw_registred) {
B43_WARN_ON(!wl);
if (wl->current_dev == wldev && wl->hw_registred) {
- /* Restore the queues count before unregistering, because firmware detect
- * might have modified it. Restoring is important, so the networking
- * stack can properly free resources. */
- wl->hw->queues = wl->mac80211_initially_registered_queues;
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
}
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
}
B43_WARN_ON(!wl);
if (wl->current_dev == wldev && wl->hw_registred) {
B43_WARN_ON(!wl);
if (wl->current_dev == wldev && wl->hw_registred) {
- /* Restore the queues count before unregistering, because firmware detect
- * might have modified it. Restoring is important, so the networking
- * stack can properly free resources. */
- wl->hw->queues = wl->mac80211_initially_registered_queues;
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
}
b43_leds_stop(wldev);
ieee80211_unregister_hw(wl->hw);
}