+ /*
+ * We have to set preset values because it depends on the clk_mul
+ * value. Moreover, SDR104 is supported in a degraded mode since the
+ * maximum sd clock value is 120 MHz instead of 208 MHz. For that
+ * reason, we need to use presets to support SDR104.
+ */
+ preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_SDR12);
+ preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_SDR25);
+ preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_SDR50);
+ preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_SDR104);
+ preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1;
+ writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div,
+ host->ioaddr + SDHCI_PRESET_FOR_DDR50);
+