The 'valid' field is never used in the code, let's remove it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Reviewed-by: Jean Pihet <j-pihet@ti.com>
Reviewed-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
u32 cpu_state;
u32 mpu_logic_state;
u32 mpu_state;
u32 cpu_state;
u32 mpu_logic_state;
u32 mpu_state;
};
static struct cpuidle_params cpuidle_params_table[] = {
/* C1 - CPU0 ON + CPU1 ON + MPU ON */
};
static struct cpuidle_params cpuidle_params_table[] = {
/* C1 - CPU0 ON + CPU1 ON + MPU ON */
- {.exit_latency = 2 + 2 , .target_residency = 5, .valid = 1},
+ {.exit_latency = 2 + 2 , .target_residency = 5 },
/* C2- CPU0 OFF + CPU1 OFF + MPU CSWR */
/* C2- CPU0 OFF + CPU1 OFF + MPU CSWR */
- {.exit_latency = 328 + 440 , .target_residency = 960, .valid = 1},
+ {.exit_latency = 328 + 440 , .target_residency = 960 },
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
- {.exit_latency = 460 + 518 , .target_residency = 1100, .valid = 1},
+ {.exit_latency = 460 + 518 , .target_residency = 1100 },
};
#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table)
};
#define OMAP4_NUM_STATES ARRAY_SIZE(cpuidle_params_table)
struct omap4_idle_statedata *cx = &omap4_idle_data[idx];
struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
struct omap4_idle_statedata *cx = &omap4_idle_data[idx];
struct cpuidle_state_usage *state_usage = &dev->states_usage[idx];
- cx->valid = cpuidle_params_table[idx].valid;
cpuidle_set_statedata(state_usage, cx);
return cx;
cpuidle_set_statedata(state_usage, cx);
return cx;
_fill_cstate(drv, 0, "MPUSS ON");
drv->safe_state_index = 0;
cx = _fill_cstate_usage(dev, 0);
_fill_cstate(drv, 0, "MPUSS ON");
drv->safe_state_index = 0;
cx = _fill_cstate_usage(dev, 0);
- cx->valid = 1; /* C1 is always valid */
cx->cpu_state = PWRDM_POWER_ON;
cx->mpu_state = PWRDM_POWER_ON;
cx->mpu_logic_state = PWRDM_POWER_RET;
cx->cpu_state = PWRDM_POWER_ON;
cx->mpu_state = PWRDM_POWER_ON;
cx->mpu_logic_state = PWRDM_POWER_RET;