830M has problems when some of the pipes are disabled. Namely if a
plane, DVO port etc. is currently assigned to a disabled pipe, it
can't moved to the other pipe until the current pipe is also enabled.
To keep things simple just leave both pipes running all the time.
Ideally I think should turn the pipes off if neither is active, and
when either becomes active we enable both. But that would reuquire
proper atomic modeset support, and probably a bit of extra care in
the order things get enabled.
v2: Reorder wrt. double wide handling changes
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Thomas Richter <richter@rus.uni-stuttgart.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
#define QUIRK_LVDS_SSC_DISABLE (1<<1)
#define QUIRK_INVERT_BRIGHTNESS (1<<2)
#define QUIRK_BACKLIGHT_PRESENT (1<<3)
#define QUIRK_LVDS_SSC_DISABLE (1<<1)
#define QUIRK_INVERT_BRIGHTNESS (1<<2)
#define QUIRK_BACKLIGHT_PRESENT (1<<3)
+#define QUIRK_PIPEB_FORCE (1<<4)
struct intel_fbdev;
struct intel_fbc_work;
struct intel_fbdev;
struct intel_fbc_work;
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
pipe);
enum transcoder cpu_transcoder = intel_pipe_to_cpu_transcoder(dev_priv,
pipe);
- /* if we need the pipe A quirk it must be always on */
- if (pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
+ /* if we need the pipe quirk it must be always on */
+ if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
+ (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
state = true;
if (!intel_display_power_enabled(dev_priv,
state = true;
if (!intel_display_power_enabled(dev_priv,
*/
static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
*/
static void i9xx_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe)
{
- /* Don't disable pipe A or pipe A PLLs if needed */
- if (pipe == PIPE_A && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ /* Don't disable pipe or pipe PLLs if needed */
+ if ((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
+ (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
return;
/* Make sure the pipe isn't still relying on us */
return;
/* Make sure the pipe isn't still relying on us */
reg = PIPECONF(cpu_transcoder);
val = I915_READ(reg);
if (val & PIPECONF_ENABLE) {
reg = PIPECONF(cpu_transcoder);
val = I915_READ(reg);
if (val & PIPECONF_ENABLE) {
- WARN_ON(!(pipe == PIPE_A &&
- dev_priv->quirks & QUIRK_PIPEA_FORCE));
+ WARN_ON(!((pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
+ (pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE)));
val &= ~PIPECONF_DOUBLE_WIDE;
/* Don't disable pipe or pipe PLLs if needed */
val &= ~PIPECONF_DOUBLE_WIDE;
/* Don't disable pipe or pipe PLLs if needed */
- if (!(pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ if (!(pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) &&
+ !(pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
val &= ~PIPECONF_ENABLE;
I915_WRITE(reg, val);
val &= ~PIPECONF_ENABLE;
I915_WRITE(reg, val);
- if (dev_priv->quirks & QUIRK_PIPEA_FORCE &&
- I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE)
- pipeconf |= PIPECONF_ENABLE;
+ if ((intel_crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
+ (intel_crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
+ pipeconf |= I915_READ(PIPECONF(intel_crtc->pipe)) & PIPECONF_ENABLE;
if (intel_crtc->config.double_wide)
pipeconf |= PIPECONF_DOUBLE_WIDE;
if (intel_crtc->config.double_wide)
pipeconf |= PIPECONF_DOUBLE_WIDE;
active = dev_priv->display.get_pipe_config(crtc,
&pipe_config);
active = dev_priv->display.get_pipe_config(crtc,
&pipe_config);
- /* hw state is inconsistent with the pipe A quirk */
- if (crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE)
+ /* hw state is inconsistent with the pipe quirk */
+ if ((crtc->pipe == PIPE_A && dev_priv->quirks & QUIRK_PIPEA_FORCE) ||
+ (crtc->pipe == PIPE_B && dev_priv->quirks & QUIRK_PIPEB_FORCE))
active = crtc->active;
for_each_intel_encoder(dev, encoder) {
active = crtc->active;
for_each_intel_encoder(dev, encoder) {
DRM_INFO("applying pipe a force quirk\n");
}
DRM_INFO("applying pipe a force quirk\n");
}
+static void quirk_pipeb_force(struct drm_device *dev)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ dev_priv->quirks |= QUIRK_PIPEB_FORCE;
+ DRM_INFO("applying pipe b force quirk\n");
+}
+
/*
* Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
*/
/*
* Some machines (Lenovo U160) do not work with SSC on LVDS for some reason
*/
/* 830 needs to leave pipe A & dpll A up */
{ 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
/* 830 needs to leave pipe A & dpll A up */
{ 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipea_force },
+ /* 830 needs to leave pipe B & dpll B up */
+ { 0x3577, PCI_ANY_ID, PCI_ANY_ID, quirk_pipeb_force },
+
/* Lenovo U160 cannot use SSC on LVDS */
{ 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },
/* Lenovo U160 cannot use SSC on LVDS */
{ 0x0046, 0x17aa, 0x3920, quirk_ssc_force_disable },